Harsh Stress Research Articles

Neutral amino acid transporter SLC38A2 protects renal medulla from hyperosmolarity-induced ferroptosis.

Hyperosmolarity of the renal medulla is essential for urine concentration and water homeostasis. However, how renal medullary collecting duct (MCD) cells survive and function under harsh hyperosmotic stress remains unclear. Using RNA-Seq, we identified SLC38A2 as a novel osmoresponsive neutral amino acid transporter in MCD cells. Hyperosmotic stress-induced cell death in MCD cells occurred mainly via ferroptosis, and it was significantly attenuated by SLC38A2 overexpression but worsened by Slc38a2-gene deletion or silencing. Mechanistic studies revealed that the osmoprotective effect of SLC38A2 is dependent on the activation of mTORC1. Moreover, an in vivo study demonstrated that Slc38a2-knockout mice exhibited significantly increased medullary ferroptosis following water restriction. Collectively, these findings reveal that Slc38a2 is an important osmoresponsive gene in the renal medulla and provide novel insights into the critical role of SLC38A2 in protecting MCD cells from hyperosmolarity-induced ferroptosis via the mTORC1 signalling pathway.

Single-Atom Metallophilic Sites for Liquid NaK Alloy Confinement toward Stable Alkali-Metal Anodes.

Room temperature liquid NaK alloy is a promising candidate for high performance metal batteries, due to its dendrite-free property and high energy density. However, its practical application is hindered by the high surface tension of liquid NaK, which causes difficulties in maintaining a stable contact with a current collector. Here, the authors demonstrate the extraordinary stable confinement of NaK alloy at room temperature by constructing a super-wetting substrate, which is based on highly dispersed cobalt-single-atom carbon nanoarrays. The developed liquid anode electrode prevented successfully the leakage of NaK alloy even in harsh stress (>5MPa) or sharp shock conditions. The symmetric cells achieved ultra-long reversible plating/stripping cycling life in both Na-ion (>1010hrs) and K-ion electrolytes (>4000hrs) at 10mA cm-2 /10mAh cm-2 . Upon fitting with Na3 V2 (PO4 )3 , the NaK assembled full battery provided high energy density (332.6kWh kg-1 ) and power density (11.05kW kg-1 ) with excellent stability after >21600cycles, which is the best value reported so far. The prepared pouch cell was able to drive a four-axis aircraft, demonstrating a great prospect in practical application. This work offers a new approach in the preparation of advanced dendrite-free liquid metal anodes with promising applications in electrochemical energy storage.

Analysis and Modeling of Aged SAC-Bi Solder Joints Subjected to Varying Stress Cycling Conditions.

Solder joints are subjected to varied stress cycle circumstances in the electronic packaging service life but are also influenced by aging. There has been limited investigation into the influence of aging and varying cycles on SnAgCu-Bi (SAC-Bi) solder joint fatigue. Cyclic fatigue tests were performed on solder joints of several alloys, including SnAgCu (SAC305), SnAgCu-Bi (SAC-Q), and SnCu-Bi (SAC-R). Individual solder joints were cycled under varying stress levels, alternating between mild and harsh stress levels. At least seven samples were prepared for each alloy by alternating between 25 mild stress (MS) cycles and three harsh stress (HS) cycles until the solder joint broke off. The impact of aging on Bi-doped solder joints fatigue under varied amplitude stress was examined and predicted for 10 and 1000 h under 125 °C. Because of the "Step-up" phenomenon of inelastic work, a new fatigue model was developed based on the common damage accumulation (CDA) model. The experimental results revealed that aging reduced the fatigue life of the tested solder alloys, particularly that of SAC305. According to the CDA model, all solder alloys failed earlier than expected after aging. The proposed model uses the amplification factor to assess inelastic work amplification after switching between the MS and HS cycles under varying stress amplitude conditions. The amplification factor for the SAC-Bi solder alloys increased linearly with fracture initiation and substantially followed crack propagation until the final failure. Compared with existing damage accumulation models, the proposed fatigue model provides a more accurate estimation of damage accumulation. For each case, the cut-off positions were examined. The SAC-Q amplification factor increased linearly to 83% of its overall life, which was much higher than that of SAC305 and SAC-R. This study identified three distinct failure modes: ductile, brittle, and near intermetallic compound (IMC) failure. It was also observed that SAC-Q with an organic solderability preservatives (OSP) surface finish was more susceptible to brittle failure owing to the excessive brittleness of the alloy material.

High-stability 4H-SiC avalanche photodiodes for UV detection at high temperatures

In this work, high-stability 4H-SiC avalanche photodiodes (APDs) for ultraviolet (UV) detection at high temperatures are fabricated and investigated. With the temperature increasing from room temperature to 150°C, a very small temperature coefficient of 7.4 mV/°C is achieved for the avalanche breakdown voltage of devices. For the first time, the stability of 4H-SiC APDs is verified based on an accelerated aging test with harsh stress conditions. Three different stress conditions are selected with the temperatures and reverse currents of 175°C/100 µA, 200°C/100 µA, and 200°C/500 µA, respectively. The results show that our 4H-SiC APD exhibits robust high-temperature performance and can even endure more than 120 hours at the harsh aging condition of 200°C/500 µA, which indicates that 4H-SiC APDs are very stable and reliable for applications at high temperatures.

Probiotic Spore-Based Oral Drug Delivery System for Enhancing Pancreatic Cancer Chemotherapy by Gut-Pancreas-Axis-Guided Delivery.

The chemotherapeutic effectiveness of pancreatic ductal adenocarcinoma (PDAC) is severely hampered by insufficient intratumoral delivery of antitumor drugs. Here, we demonstrate that enhanced pancreatic cancer chemotherapy can be achieved by probiotic spore-based oral drug delivery system via gut-pancreas axis translocation. Clostridium butyricum spores resistant to harsh external stress are extracted as drug carriers, which are further covalently conjugated with gemcitabine-loaded mesoporous silicon nanoparticles (MGEM). The spore-based oral drug delivery system (SPORE-MGEM) migrates upstream into pancreatic tumors from the gut, which increases intratumoral drug accumulation by ∼3-fold compared with MGEM. In two orthotopic PDAC mice models, tumor growth is markedly suppressed by SPORE-MGEM without obvious side effects. Leveraging the biological contact of the gut-pancreas axis, this probiotic spore-based oral drug delivery system reveals a new avenue for enhancing PDAC chemotherapy.

Engineered Spore-Forming Bacillus as a Microbial Vessel for Long-Term DNA Data Storage.

DNA data storage technology may supersede conventional chip or magnetic data storage medium, providing long-term stability, high density, and sustainable storage. Due to its error-correcting capability, DNA data stored in living organisms exhibits high fidelity in information replication. Here we report the development of a Bacillus chassis integrated with an inducible artificially assembled bacterial chromosome to facilitate random data access. We generated three sets of data in the form of DNA sequences using a rudimentary coding system accessible by the regulatory promoter. Sporulated Bacillus harboring the genes were used for long-term storage, where viability assays of spores were subjected to harsh environmental stresses to evaluate the data storage stability. The data accuracy remained above 99% after high temperature and oxidative stress treatment, whereas UV irradiation treatment provided above 96% accuracy. The developed Bacillus chassis and artificial chromosome facilitate the long-term storage of larger datum volume by using other DNA digital encoding and decoding programs.

Evidence of Plasticity‐Driven Conductivity Drop in an Ultra‐Low‐k Dielectric Organosilicate Glass

AbstractAdvanced devices (for microelectronics, energy storage, power sourcing) are complex architectures of metals and dielectrics subjected to harsh mechanical stresses. The functional reliability of the embedded dielectrics is driven by their ability to preserve their electrical properties (such as leakage and breakdown). Accordingly, understanding the interplay between the mechanical and electrical behaviors of dielectric films is critical to predict the lifetime of functional devices. In this study, the effect of plastic deformation on the electrical conduction of an ultra‐low‐k dielectric film is elucidated by combining in situ advanced experiments and finite element modeling. Experimentally, “electrical‐nanoindentation” tests emphasize the strong correlation between electrical and mechanical failures (leakage degradation, breakdown, plasticity, cracking). These experiments also reveal a counterintuitive electrical conduction drop under high mechanical stresses. This phenomenon is reproduced numerically by correcting the Poole–Frenkel conduction law with a strain‐dependent factor, and described analytically in terms of space‐charge build‐up induced by the trapping of holes at the mechanically generated defects. A threshold strain is identified as the keystone relating this strain‐dependent conduction to the current line distribution within the dielectric. This study provides a new understanding of the mechanical/electrical couplings in dielectrics, which opens promising insights into reliability issues for advanced devices.

Induction of viable but nonculturable Salmonella spp. in liquid eggs by mild heat and subsequent resuscitation

Salmonella spp. is one of the leading causes of foodborne outbreaks worldwide. Salmonella spp. has been associated with a variety of food sources, particularly egg products. They can enter a viable but nonculturable (VBNC) state in response to harsh stress. VBNC cells still retain membrane integrity and metabolic activity, which may pose health risks. However, the formation mechanism and resuscitation ability of VBNC cells are not well understood. In this work, Salmonella spp. cocktails, including Salmonella enterica serovar Newport and Salmonella enterica serovar Enteritidis, in liquid egg products was induced into a VBNC state by mild heat treatment, a commonly used method to inhibit the growth of pathogenic in liquid egg industry. Mild heat induced VBNC cells were found to resuscitate in liquid egg yolk (LEY) and liquid whole egg (LWE), but they failed to recover in liquid egg white (LEW). In addition, a certain number of cells remained as VBNC state after in vitro digestion. The membrane vesicle (MV) protein encoding gene pagC, two-component system encoding genes phoP/Q and sigma factor encoding gene rpoS were highly expressed in VBNC cells compared with the culturable counterparts. The results of this study can contribute to a better understanding of the health risks associated with Salmonella spp. in VBNC state and provide a theoretical basis for formation mechanism of VBNC state.

Failure mechanism of 4H-SiC junction barrier Schottky diodes under harsh thermal cycling stress

The concern in the long-term reliability of the SiC power devies is raised lately in power electronic field due to its brief history and limited data. In this work, discrete 1200 V/20A SiC JBS diodes have been intensively investigated by HTRB, HAST, and TCT. 2 % samples have failed in the harsh thermal cycling test, showing that the failure mechanism is attributed to field-oxide cracking. The electrical and physical failure analysis pointed out that a gradual degradation occurred at the termination structure, causing non-recoverable damages and provoking a significant increase in the leakage current. The FIB cut and SEM analysis showed the delamination existence between field oxide layer and silicon carbide layer in the degraded devices. The observed leakage current after the TCT could be well correlated with the formation of the delamination, which created a current leaking path between active and termination region. These findings emphasize the importance of SiO2/SiC interface quality in the long-term highly reliable SiC power devices, and indicate further optimized design of SiO2 passivation layer or other alternative materials is urgently needed to overcome this structural weakness.

Abstract 3003: The effects of autophagy inhibition on HNSCC sensitivity to CTX

Abstract Background: Cetuximab (CTX) is a monoclonal antibody commonly used in the treatment of head and neck squamous cell carcinomas (HNSCCs) that acts by targeting the epidermal growth factor receptor (EGFR). Addition of CTX to standard multi-agent chemotherapy only slightly improves the response rate from 20% to 36%, highlighting the urgent need for improved treatment. Autophagy is a naturally occurring mechanism activated within cells to protect them from harsh conditions or stress but can also provide cancerous cells with protection against further treatment attempts. Here, we examine the efficacy of combining CTX with the autophagy inhibitor, SAR405, as well as investigating the specific mechanism of CTX-induced autophagy. Methods: To measure autophagy, we utilized the Promega LC3 reporter assay, Western blotting for LC3, immunofluorescence for LC3, and an acridine orange assay. We ran our assays using the HNSCC cell lines A253 (HPV-), UM-SCC1 (HPV+), and its CTX-resistant derivative, UM-SCC1-C5 (HPV+). Clonogenic assays were run to measure colony formation, cell counting kit 8 (CCK8) assays to determine cell survival, and flow cytometry to investigate cell cycle status. Results: In this study, we first were able to demonstrate that CTX can activate pro-survival autophagy. CTX-treated cells had higher LC3 flux and more LC3 puncta than control cells as assessed by western blot and immunofluorescence staining, respectively. CTX-resistant cells demonstrated higher basal LC3 flux compared to the CTX-sensitive parental cells. We also discovered that the use of the autophagy inhibitor, SAR405, could help improve tumor response when combined with CTX. The addition of SAR405 to CTX treatment led to a decrease in colony formation and a decrease in cell survival, overcoming resistance to CTX. Interestingly, we discovered that SAR405 alone led to cell cycle arrest in the G1 phase but did not lead to a statistically significant decrease in cell survival compared to the control, showing that SAR405 is able to arrest cell growth but is not cytotoxic. Finally, knockdown of EGFR or LAPTM4B prevented CTX-induced activation of autophagy. Conclusion: Through our work, we have been able to demonstrate that CTX is able to activate autophagy, and that this initiation of autophagy plays a cytoprotective role in HNSCC cells. The addition of the autophagy inhibitor SAR405 improved response to CTX treatment. The promising results obtained thus far open the door to future studies investigating the efficacy of combining CTX with more specific autophagy inhibitors. Citation Format: Samantha T. Bradley, Yong-Syu Lee, Justin H. Skiba, Jaimee Eckers, Adam D. Swick, Rong Hu, Kwang P. Nickel, Zafer Gurel, Pippa F. Cosper, Randall J. Kimple. The effects of autophagy inhibition on HNSCC sensitivity to CTX [abstract]. In: Proceedings of the American Association for Cancer Research Annual Meeting 2022; 2022 Apr 8-13. Philadelphia (PA): AACR; Cancer Res 2022;82(12_Suppl):Abstract nr 3003.

Zeaxanthin Epoxidase Activity Is Downregulated by Hydrogen Peroxide.

The xanthophyll zeaxanthin (Zx) serves important photoprotective functions in chloroplasts and is particularly involved in the dissipation of excess light energy as heat in the antenna of photosystem II (PSII). Zx accumulates under high-light (HL) conditions in thylakoid membranes and is reconverted to violaxanthin by Zx epoxidase (ZEP) in low light or darkness. ZEP activity is completely inhibited under long-lasting HL stress, and the ZEP protein becomes degraded along with the PSII subunit D1 during photoinhibition of PSII. This ZEP inactivation ensures that high levels of Zx are maintained under harsh HL stress. The mechanism of ZEP inactivation is unknown. Here, we investigated ZEP inactivation by reactive oxygen species (ROS) under in vitro conditions. Our results show that ZEP activity is completely inhibited by hydrogen peroxide (H2O2), whereas inhibition by singlet oxygen or superoxide seems rather unlikely. Due to the limited information about the amount of singlet oxygen and superoxide accumulating under the applied experimental conditions, however, a possible inhibition of ZEP activity by these two ROS cannot be generally excluded. Despite this limitation, our data support the hypothesis that the accumulation of ROS, in particular H2O2, might be responsible for HL-induced inactivation of ZEP under in vivo conditions.

The responses of Scrippsiella acuminata to the stresses of darkness: antioxidant activities and formation of pellicle cysts

In order to understand the strategy of Scrippsiella acuminata to cold dark environment, the antioxidant responses and the formation of pellicle cysts of S. acuminata to darkness at 8°C and 20°C were investigated. Cell densities decreased significantly after 96 h dark treatment, and no live cells were observed after 9-days dark treatments. The darkness stress generally resulted in an increase of antioxidant defenses, including soluble protein, superoxide dismutase (SOD), glutathione (GSH), and malondialdehyde (MDA). Cellular soluble protein and SOD activity increased sharply under 20°C darkness, which protected algal cells against the oxidative stress from darkness, and resulted in relatively lower MDA levels. Soluble protein and SOD activity were enhanced under 8°C darkness as well however not in a sharp rise, and higher levels of MDA and GSH were recorded. The results suggested high SOD and protein levels protected cells against harsh darkness stress, while high GSH not only helped algae cells resist dark stress, but also played an important role in low temperature stress. Darkness promoted the formation of pellicle cysts of S. acuminata, and the maximum formation rates were 16.06% to 21.74% at 8°C and 20°C, respectively. Germination of pellicle cysts occurred within 24 h after light exposure, however pellicle cysts could not withstand long-time darkness stress, and all pellicle cysts died after 9-days darkness exposure. The results of this study suggest that S. acuminata is able to overcome temporary cold darkness through forming pellicle cysts.

Life prediction of membrane electrode assembly through load and potential cycling accelerated degradation testing in polymer electrolyte membrane fuel cells

Accelerated degradation tests (ADTs) are commonly used to assess the durability of membrane electrode assembly (MEA) components consisting of polymer electrolyte membrane fuel cells (PEMFC) under harsh stress conditions, estimating their lifetime in actual use condition and uncovering their vital degradation mechanisms. ADTs apply mechanically, chemically, or thermally combined stressors to efficiently investigate the durability of MEAs. However, combined stressors for ADTs might cause biased lifetime prediction because major deterioration mechanisms of MEA components are mixed with each other. This work proposes a method to accurately predict the lifetime of MEA through empirical modeling of its performance degradation through ADTs under potential cycle (carbon corrosion) and load cycle tests (electrocatalysts). To simulate operation modes of fuel cell electric vehicles, MEAs are tested under continuous on-off cycle testing (24 h operating and 1 h break) for 5000 h. Degradation patterns of MEAs are first modeled by the empirical model. The relationship between ADTs (potential and load cycle) and continuous on-off condition is then closely examined to accurately predict MEA lifetime under actual operation environments. The proposed idea has a potential to resolve critical durability issues of MEAs by identifying intermingling effects from other constituents.

Regulating Thermogalvanic Effect and Mechanical Robustness via Redox Ions for Flexible Quasi-Solid-State Thermocells

HighlightsA redox couple is employed to fulfill the dual-function of both heat-to-electricity conversion and ionic crosslinking.High thermoelectrochemical performance can be achieved at optimized redox concentration, and dual-crosslinked network ensures remarkable mechanical flexibility and robustness.The hydrogel-based quasi-solid-state thermocell can provide stable energy output under harsh mechanical stress and deformations.

Arbuscular mycorrhizal fungi protect a subtropical tree species exposed to simulated acid rain by accelerating photosynthetic ability, antioxidant enzymes and osmolyte accumulation

AbstractAcid rain (AR), which occurs frequently in southern China, negatively affects the growth of subtropical tree species. Arbuscular mycorrhizal fungi (AMF) mitigate the detrimental effects induced by AR. However, the mechanisms by which AMF protect Zelkova serrata, an economically important tree species in southern China, from AR stress remain unclear. We conducted a greenhouse experiment in which Z. serrata plants were inoculated with AMF species Rhizophagus intraradices and Diversispora versiformis, either alone or as a mixed culture, or with a sterilized inoculum (negative control). The plants were subjected to three levels of simulated sulfuric AR and nitric AR (pH 2.5, 4.0 and 5.6) to examine any interactive effects on growth, photosynthetic capabilities, antioxidant enzymes, osmotic adjustment and soil enzymes. AR significantly decreased dry weight, chlorophyll content, net photosynthetic rate and soluble protein (SP) of non-mycorrhizal plants. Mycorrhizal inoculation, especially a combination of R. intraradices and D. versiformis, notably improved dry weight, photosynthetic capabilities, catalase, peroxidase, superoxide dismutase, SP and root acid phosphatase activity of Z. serrata under harsh AR stress. Moreover, the benefits from AMF symbionts depended on the identity of AM fungal species and the gradient of AR stress. Our results indicate that AM fungi protect Z. serrata against AR stress by synchronously activating photosynthetic ability, antioxidant enzymes and osmolyte accumulation. These findings suggest that a combination of R. intraradices and D. versiformis may be a preferable choice for culturing Z. serrata in southern China.

Failure of a brittle layer on a ductile substrate: Nanoindentation experiments and FEM simulations

Functional devices such as microelectronic systems, solar cells and power devices are composed of complex stacks of various materials, including semiconductors, ceramics and metallic alloys. The knowledge of the mechanical response of those stacks is a key point, as they are submitted to harsh stresses during the fabrication process (induced by thermal treatments, mechanical polishing, packaging processes, ...) as well as during the device lifetime.We report the mechanical study of a microelectronic-dedicated stack where a silicon nitride (Si3N4) layer was deposited on top of a thick metallic alloy (AlSiCu) layer. In microelectronic chips, Si3N4 is widely used as a passivation layer, while AlSiCu is the electrical connection layer. The structure has been tested experimentally by nanoindentation. Multiple pop-in events were observed on the loading curves, indicating multiple cracking, with cracks initiated at various loading stages. The high reproducibility of the loading curves then allowed their full analysis by numerical modeling.The complete damage process of the multilayer during indentation is analyzed using modeling by the Finite Element Method (FEM), accounting for plasticity in AlSiCu, crack propagation in the Si3N4 layer and possible delamination at the interface between the two layers. The various stages of the damage process occurring in the Si3N4 are elucidated, showing in particular the occurrence of a first crack in the region underneath the indenter (hence not visible by a surface observation), followed by a second crack forming further away from the indenter, on the top surface of the layer. Moreover, a novel procedure for the identification of the Si3N4 layer tensile strength is presented, using an inverse method based on FEM simulations and experimental data. The results of the simulations (cracking patterns and cracks locations) are also further validated by the observation of structure cross-sections with a Scanning Electron Microscope (SEM) after Focused Ion Beam (FIB) milling of the sample. In addition, the proposed identification procedure is quite generic and can be adapted to other systems showing similar multiple-cracking patterns under indentation.

Thiol Reductases in Deinococcus Bacteria and Roles in Stress Tolerance.

Deinococcus species possess remarkable tolerance to extreme environmental conditions that generate oxidative damage to macromolecules. Among enzymes fulfilling key functions in metabolism regulation and stress responses, thiol reductases (TRs) harbour catalytic cysteines modulating the redox status of Cys and Met in partner proteins. We present here a detailed description of Deinococcus TRs regarding gene occurrence, sequence features, and physiological functions that remain poorly characterised in this genus. Two NADPH-dependent thiol-based systems are present in Deinococcus. One involves thioredoxins, disulfide reductases providing electrons to protein partners involved notably in peroxide scavenging or in preserving protein redox status. The other is based on bacillithiol, a low-molecular-weight redox molecule, and bacilliredoxin, which together protect Cys residues against overoxidation. Deinococcus species possess various types of thiol peroxidases whose electron supply depends either on NADPH via thioredoxins or on NADH via lipoylated proteins. Recent data gained on deletion mutants confirmed the importance of TRs in Deinococcus tolerance to oxidative treatments, but additional investigations are needed to delineate the redox network in which they operate, and their precise physiological roles. The large palette of Deinococcus TR representatives very likely constitutes an asset for the maintenance of redox homeostasis in harsh stress conditions.

Impact of Exogenously Sprayed Antioxidants on Physio-Biochemical, Agronomic, and Quality Parameters of Potato in Salt-Affected Soil.

Salinity is one of the harsh environmental stresses that destructively impact potato growth and production, particularly in arid regions. Exogenously applied safe–efficient materials is a vital approach for ameliorating plant growth, productivity, and quality under salinity stress. This study aimed at investigating the impact of foliar spray using folic acid (FA), ascorbic acid (AA), and salicylic acid (SA) at different concentrations (100, 150, or 200 mg/L) on plant growth, physiochemical ingredients, antioxidant defense system, tuber yield, and quality of potato (Solanum tuberosum L cv. Spunta) grown in salt-affected soil (EC = 7.14 dS/m) during two growing seasons. The exogenously applied antioxidant materials (FA, AA, and SA) significantly enhanced growth attributes (plant height, shoot fresh and dry weight, and leaves area), photosynthetic pigments (chlorophyll a and b and carotenoids), gas exchange (net photosynthetic rate, Pn; transpiration rate, Tr; and stomatal conductance, gs), nutrient content (N, P, and K), K+/ Na+ ratio, nonenzymatic antioxidant compounds (proline and soluble sugar content), enzymatic antioxidants (catalase (CAT), peroxidase (POX), superoxide dismutase (SOD), and ascorbate peroxidase (APX)) tuber yield traits, and tuber quality (dry matter, protein, starch percentage, total carbohydrates, and sugars percentage) compared with untreated plants in both seasons. Otherwise, exogenous application significantly decreased Na+ and Cl− compared to the untreated control under salt stress conditions. Among the assessed treatments, the applied foliar of AA at a rate of 200 mg/L was more effective in promoting salt tolerance, which can be employed in reducing the losses caused by salinity stress in potato grown in salt-affected soils.

Highly Flexible and Durable Thermoelectric Power Generator Using CNT/PDMS Foam by Rapid Solvent Evaporation.

Using a simple, rapid solvent evaporation process, the authors produced 3D carbon nanotube (CNT)/polydimethylsiloxane (PDMS) foams with both high thermoelectric (TE) and good mechanical performance and used them to fabricate highly flexible and durable TE generators. The numerous pores and interfaces in the CNT/PDMS foams, which have porosities exceeding 87%, afford very low thermal conductivity of 0.13 W m-1 K-1 . The foam has a zT value of 6.6 × 10-3 , which is twice as high as that of pristine CNT foam. Importantly, the CNT/PDMS foam exhibits good tensile strength of 0.78MPa, elongation greater than 20%, and excellent resilience even at compressive strain of 80%. This foam is used to fabricate a highly flexible TE foam generator that exhibits a moderate output power of 1.9 µW generated from the large temperature gradient of 18.1 K produced by applied heat. The authors also demonstrate a practical TE foam generator that produces sustainable output power of 3.1 µW under a compressive strain of 80% and 38.2 nW under the continuous vibrational stress produced by a car engine. The TE foam generator also exhibits excellent stability and durability under cyclic bending and harsh vibrational stress.

Heat stress during development makes antlion larvae more responsive to vibrational cues.

We investigated the effects of heat stress on the responsiveness to vibrational cues, our measure of perceptual ability, in Myrmeleon bore antlion larvae (Neuroptera: Myrmeleontidae). We reared these trap-building predatory larvae under 2 heat stress regimes (mild, 30°C, and harsh, 36°C), and after they progressed from one instar stage to another, we tested their perceptual ability in common unchallenging conditions. We hypothesized that exposure to the harsh heat stress regime would impose costs resulting in handicapped vibration responsiveness. We found that the harsh heat stress regime generated more stressful conditions for the larvae, as evidenced by increased mortality and postponed molting, and the loss of body mass among larger larvae. Furthermore, among the individuals who remained alive, those originating from the harsh heat stress regime were characterized by higher vibration responsiveness. Our results suggest 2 not mutually exclusive scenarios. Costly heat stress conditions can sieve out individuals characterized by poor perceptual ability or surviving individuals can attempt to hunt more efficiently to compensate for the physiological imbalance caused by heat stress. Both of these mechanisms fit into the ongoing debate over how adaptation and plasticity contribute to shaping insect communities exposed to heat stress.