Hand-held Tools Research Articles

MobiTangibles: Enabling Physical Manipulation Experiences of Virtual Precision Hand-Held Tools' Miniature Control in VR.

Realistic simulation for miniature control interactions, typically identified by precise and confined motions, commonly found in precision hand-held tools, like calipers, powered engravers, retractable knives, etc., are beneficial for skill training associated with these kinds of tools in virtual reality (VR) environments. However, existing approaches aiming to simulate hand-held tools' miniature control manipulation experiences in VR entail prototyping complexity and require expertise, posing challenges for novice users and individuals with limited resources. Addressing this challenge, we introduce MobiTangibles-proxies for precision hand-held tools' miniature control interactions utilizing smartphone-based magnetic field sensing. MobiTangibles passively replicate fundamental miniature control experiences associated with hand-held tools, such as single-axis translation and rotation, enabling quick and easy use for diverse VR scenarios without requiring extensive technical knowledge. We conducted a comprehensive technical evaluation to validate the functionality of MobiTangibles across diverse settings, including evaluations for electromagnetic interference within indoor environments. In a user-centric evaluation involving 15 participants across bare hands, VR controllers, and MobiTangibles conditions, we further assessed the quality of miniaturized manipulation experiences in VR. Our findings indicate that MobiTangibles outperformed conventional methods in realism and fatigue, receiving positive feedback.

Dual-labeled anti-GD2 targeted probe for intraoperative molecular imaging of neuroblastoma

BackgroundSurgical resection is integral for the treatment of neuroblastoma, the most common extracranial solid malignancy in children. Safely locating and resecting primary tumor and remote deposits of disease remains a significant challenge, resulting in high rates of complications and incomplete surgery, worsening outcomes. Intraoperative molecular imaging (IMI) uses targeted radioactive or fluorescent tracers to identify and visualize tumors intraoperatively. GD2 was selected as an IMI target, as it is highly overexpressed in neuroblastoma and minimally expressed in normal tissue.MethodsGD2 expression in neuroblastoma cell lines was measured by flow cytometry. DTPA and IRDye® 800CW were conjugated to anti-GD2 antibody to generate DTPA-αGD2-IR800. Binding affinity (Kd) of the antibody and the non-radiolabeled tracer were then measured by ELISA assay. Human neuroblastoma SK-N-BE(2) cells were surgically injected into the left adrenal gland of 3.5-5-week-old nude mice and the orthotopic xenograft tumors grew for 5 weeks. 111In-αGD2-IR800 or isotype control tracer was administered via tail vein injection. After 4 and 6 days, mice were euthanized and gamma and fluorescence biodistributions were measured using a gamma counter and ImageJ analysis of acquired SPY-PHI fluorescence images of resected organs (including tumor, contralateral adrenal, kidneys, liver, muscle, blood, and others). Organ uptake was compared by one-way ANOVA (with a separate analysis for each tracer/day combination), and if significant, Sidak’s multiple comparison test was used to compare the uptake of each organ to the tumor. Handheld tools were also used to detect and visualize tumor in situ, and to assess for residual disease following non-guided resection.Results111In-αGD2-IR800 was successfully synthesized with 0.75-2.0 DTPA and 2–3 IRDye® 800CW per antibody and retained adequate antigen-binding (Kd = 2.39 nM for aGD2 vs. 21.31 nM for DTPA-aGD2-IR800). The anti-GD2 tracer demonstrated antigen-specific uptake in mice with human neuroblastoma xenografts (gamma biodistribution tumor-to-blood ratios of 3.87 and 3.88 on days 4 and 6 with anti-GD2 tracer), while isotype control tracer did not accumulate (0.414 and 0.514 on days 4 and 6). Probe accumulation in xenografts was detected and visualized using widely available operative tools (Neoprobe® and SPY-PHI camera) and facilitated detection ofputative residual disease in the resection cavity following unguided resection.ConclusionsWe have developed a dual-labeled anti-GD2 antibody-based tracer that incorporates In-111 and IRDye® 800CW for radio- and fluorescence-guided surgery, respectively. The tracer adequately binds to GD2, specifically accumulates in GD2-expressing xenograft tumors, and enables tumor visualization with a hand-held NIR camera. These results encourage the development of 111In-αGD2-IR800 for future use in children with neuroblastoma, with the goal of improving patient safety, completeness of resection, and overall patient outcomes.

Intelligent ultrasonic aspirator: Advancing tissue differentiation through hierarchical classification during hand-held resection

Modern neurosurgery strives to maximize tumor removal while preserving healthy tissue integrity. Accurate intraoperative differentiation between tumor and healthy tissue is crucial yet challenging. Often neurosurgeons rely on their experience and haptic feedback during palpation to distinguish between tumor and healthy tissue. A commonly used hand-held tool for tissue removal during neurosurgery is the ultrasonic aspirator, which changes its electrical properties as it interacts with tissue. The goal is to equip the ultrasonic aspirator with the ability to differentiate between different types of tissue while at the same time not interfering with the surgical workflow and providing comprehensible outcomes. To this end, a hierarchical classification approach is employed as a proof of concept, enabling precise identification of tissue stiffness during resection.The hierarchical approach is compared with the standard flat classification, commonly used in machine learning. Within the hierarchical approach, two strategies are employed: mandatory leaf-node predictions (MLNP) and non-mandatory leaf-node predictions (NMLNP). The NMLNP allows prediction to revert to a parent node when certainty is low. Data are acquired on three artificial tissue models – differing in stiffness – with an ultrasonic aspirator in a hand-held manner. The dataset comprises 1,821 data points for training and 186 for testing after balancing.The results indicate a slight performance advantage for the hierarchical classification MLNP approach over the flat classification approach in the absence of confidence thresholds, with weighted F2-scores of 0.781 and 0.762, respectively. However, the application of confidence thresholds results in both approaches exhibiting comparable performance, with the hierarchical NMLNP approach achieving a weighted F1-score of 0.920, thereby demonstrating superior overall performance. The effects of enforcing these thresholds and excluding data with low certainty are thoroughly investigated. This work emphasizes the feasibility of tissue differentiation using a hand-held ultrasound aspirator while resecting tissue. Moreover, it highlights the capability of hierarchical classification in advancing tissue differentiation accuracy during neurosurgical procedures, which could ultimately aid surgeons and enhance the safety of intraoperative workflows.

How bipedalism shapes humans' actions with hand tools.

The task for an embodied cognitive understanding of humans' actions with tools is to elucidate how the human body, as a whole, supports the perception of affordances and dexterous action with objects in relation to other objects. Here, we focus on the relationship between humans' actions with handheld tools and bipedal posture. Posture plays a pivotal role in shaping animals' perception and action dynamics. While humans stand and locomote bipedally, other primates predominantly employ quadrupedal postures and locomotion, relying on both hands and feet to support the body. Drawing upon evidence from evolutionary biology, developmental psychology and performance studies, we elucidate the influence of bipedalism on our actions with objects and on our proficiency in using tools. We use the metaphor of cascades to capture the dynamic, nonlinear transformations in morphology and behaviour associated with posture and the use of tools across evolutionary and developmental timescales. Recent work illustrates the promise of multifractal cascade analysis to reveal nonlinear, cross-scale interactions across the entire body in real-time, supporting the perception of affordances for actions with tools. Cascade analysis enriches our comprehension of real-time performance and facilitates exploration of the relationships among whole-body coordination, individual development, and evolutionary processes.This article is part of the theme issue 'Minds in movement: embodied cognition in the age of artificial intelligence'.

A Handheld Tool for the Rapid Morphological Identification of Mosquito Species (VectorCam) for Community-Based Malaria Vector Surveillance: Summative Usability Study.

Malaria impacts nearly 250 million individuals annually. Specifically, Uganda has one of the highest burdens, with 13 million cases and nearly 20,000 deaths. Controlling the spread of malaria relies on vector surveillance, a system where collected mosquitos are analyzed for vector species' density in rural areas to plan interventions accordingly. However, this relies on trained entomologists known as vector control officers (VCOs) who identify species via microscopy. The global shortage of entomologists and this time-intensive process cause significant reporting delays. VectorCam is a low-cost artificial intelligence-based tool that identifies a mosquito's species, sex, and abdomen status with a picture and sends these results electronically from surveillance sites to decision makers, thereby deskilling the process to village health teams (VHTs). This study evaluates the usability of the VectorCam system among VHTs by assessing its efficiency, effectiveness, and satisfaction. The VectorCam system has imaging hardware and a phone app designed to identify mosquito species. Two users are needed: (1) an imager to capture images of mosquitos using the app and (2) a loader to load and unload mosquitos from the hardware. Critical success tasks for both roles were identified, which VCOs used to train and certify VHTs. In the first testing phase (phase 1), a VCO and a VHT were paired to assume the role of an imager or a loader. Afterward, they swapped. In phase 2, two VHTs were paired, mimicking real use. The time taken to image each mosquito, critical errors, and System Usability Scale (SUS) scores were recorded for each participant. Overall, 14 male and 6 female VHT members aged 20 to 70 years were recruited, of which 12 (60%) participants had smartphone use experience. The average throughput values for phases 1 and 2 for the imager were 70 (SD 30.3) seconds and 56.1 (SD 22.9) seconds per mosquito, respectively, indicating a decrease in the length of time for imaging a tray of mosquitos. The loader's average throughput values for phases 1 and 2 were 50.0 and 55.7 seconds per mosquito, respectively, indicating a slight increase in time. In terms of effectiveness, the imager had 8% (6/80) critical errors and the loader had 13% (10/80) critical errors in phase 1. In phase 2, the imager (for VHT pairs) had 14% (11/80) critical errors and the loader (for VHT pairs) had 12% (19/160) critical errors. The average SUS score of the system was 70.25, indicating positive usability. A Kruskal-Wallis analysis demonstrated no significant difference in SUS (H value) scores between genders or users with and without smartphone use experience. VectorCam is a usable system for deskilling the in-field identification of mosquito specimens in rural Uganda. Upcoming design updates will address the concerns of users and observers.

Revolutionizing infectious disease management in low-resource settings: The impact of rapid diagnostic technologies and portable devices

Revolutionizing infectious disease management in low-resource settings hinges on the integration of rapid diagnostic technologies and portable devices. These innovations offer transformative potential by providing timely, accurate, and cost-effective diagnosis, thereby enhancing patient outcomes and curbing the spread of infectious diseases. Rapid diagnostic technologies, including point-of-care tests and molecular diagnostics, enable swift identification of pathogens, allowing for immediate and appropriate treatment. This is particularly crucial in low-resource settings where laboratory infrastructure is often limited, and delays in diagnosis can lead to increased morbidity and mortality. Portable diagnostic devices, such as handheld PCR machines and mobile phone-based diagnostic tools, further extend the reach of healthcare services to remote and underserved areas. These devices are designed to be user-friendly, requiring minimal training for healthcare workers, and can operate in challenging environments without the need for extensive power supplies or refrigeration. The impact of these technologies is profound. By reducing the time to diagnosis, rapid diagnostic tests can decrease the misuse of antibiotics, helping to combat antibiotic resistance—a major global health threat. Additionally, early and accurate diagnosis facilitates better disease surveillance and outbreak management, enabling quicker public health responses. Cost-effective and scalable, these technologies also offer significant economic benefits, reducing the burden on healthcare systems and improving overall health equity. This review underscores the critical role of rapid diagnostic technologies and portable devices in revolutionizing infectious disease management in low-resource settings. Their implementation not only improves individual patient care but also strengthens public health infrastructure, ultimately contributing to global health security and the fight against infectious diseases. Keywords: Infection Disease, Diagnostic Technologies, Management.

Handheld Ultrasound Bladder Volume Assessment Compared to Standard Technique.

Urinary retention is a common complaint encountered in the emergency department (ED).Current tools for the assessment of urinary retention are either bladder volume estimation with a bladder scanner performed by nursing staff or direct visualization and measurement via bedside ultrasound performed by an emergency physician. Newer handheld ultrasound devices such as the Butterfly iQ have been brought to the market to bring ultrasound more conveniently to the bedside.A recently released handheld auto-calculation tool produces a 3D image of the bladder and instant bladder volume measurement in milliliters. However, there is a paucity of data assessing the validity of the new Butterfly iQ at the bedside. This study sought to compare the diagnostic accuracy and rated user convenience of the nursing bladder scanner, the cart-based ultrasound machine, and the Butterfly iQ auto-bladder volume tool. ED patients were prospectively enrolled and underwent bladder measurements in a randomized, pre-determined order with each modality. Measurements were subsequently compared to the gold standard of catheterization. Cart-based ultrasound had the highest agreement to catheterization when compared to the RN scanner and the Butterfly iQ.However, the Butterfly iQ and RN scanner were both considered more convenient measurement modalities than the cart-based ultrasound. The Butterfly iQ serves as a cost-effective alternative to cart-based ultrasound while providing greater general utility compared to bladder scanners.

Stress Evaluation Using Finite Elements in a Manual Agricultural Tool

This study addresses the imperative need for efficient hand-held agricultural tools, particularly in challenging contexts like hillside agriculture, by focusing on the redesign and evaluation of a manual tillage tool. The objective is to comprehensively assess the stress and fatigue life of a redesigned tool, considering different manufacturing materials such as steels (AISI/SAE 4140, 4130, 1060), A356 aluminum, and nodular cast irons. Employing finite element method simulations and the Von Mises equation, this research confirms an optimal performance within elastic limits for all materials, mitigating the risks of plastic deformation or breakage during normal operation, with Von Mises stresses ranging from 8.39 to 16.30 MPa. All the tools yielded optimal results, meeting the critical requirements for soil penetration resistance, reporting no fatigue failures, and exhibiting useful life values over 1.75 x 1013 years. In terms of ergonomics, A356 aluminum stands out, as it is less heavy and implies a lower effort by the operator, promoting efficient tillage without compromising comfort. This research provides nuanced insights for the design of agricultural tools, emphasizing the harmonious balance between efficiency, longevity, and operator comfort in sustainable practices.

Design of new anti-vibration gloves for workers: ongoing research and preliminary results

Abstract Powered hand-held tools such as drillers, chainsaws, blowers, etc. cause hand-arm vibration syndrome. Common anti-vibration gloves cannot attenuate the vibrations at low frequencies and satisfy workers due to a lack of dexterity and grip strength. Therefore, the study presents a new glove based on an absorber to reduce vibration transmission at low frequencies. The new gloves and the passive absorbers are affordable and made of simple components, rubber rods, and violin strings with different sizes are the base of the used absorbers to attenuate the range of working frequencies. To predict the effectiveness of the fabricated gloves, the study performed experiments using non-expensive tools. A smartphone and a credible Android application (IDynamics) are utilized to measure the response in the wrist when using an air blower 450 W in specific working conditions. Additionally, the study builds a simple test rig to carry out the effect of the new gloves on the dexterity. Accordingly, the suggested low-cost gloves achieve a 50% acceleration reduction at the wrist approximately to the bare hand or any current anti-vibration gloves that are specified for the higher frequencies only.

Risk of hand and forearm conditions due to vibrating hand-held tools exposure: a retrospective cohort study from Sweden

ObjectivesThe occurrence of hand and forearm disorders related to vibration exposure, adjusted for relevant background factors, is scarcely reported. We analysed the prevalence of such conditions in a large population...

Noninvasive assessment of human microvascular function in health and disease using incident dark-field microscopy.

Reduced peripheral microvascular reactivity is associated with an increased risk for major adverse cardiac events (MACEs). Tools for noninvasive assessment of peripheral microvascular function are limited, and existing technology is poorly validated in both healthy populations and patients with cardiovascular disease (CVD). Here, we used a handheld incident dark-field imaging tool (CytoCam) to test the hypothesis that, compared with healthy individuals (no risk factors for CVD), subjects formally diagnosed with coronary artery disease (CAD) or those with ≥2 risk factors for CAD (at risk) would exhibit impaired peripheral microvascular reactivity. A total of 17 participants (11 healthy, 6 at risk) were included in this pilot study. CytoCam was used to measure sublingual microvascular total vessel density (TVD), perfused vessel density (PVD), and microvascular flow index (MFI) in response to the topical application of acetylcholine (ACh) and sublingual administration of nitroglycerin (NTG). Baseline MFI and PVD were significantly reduced in the at-risk cohort compared with healthy individuals. Surprisingly, following the application of acetylcholine and nitroglycerin, both groups showed a significant improvement in all three microvascular perfusion parameters. These results suggest that, despite baseline reductions in both microvascular density and perfusion, human in vivo peripheral microvascular reactivity to both endothelial-dependent and -independent vasoactive agents remains intact in individuals with CAD or multiple risk factors for disease.NEW & NOTEWORTHY To our knowledge, this is the first study to comprehensively characterize in vivo sublingual microvascular structure and function (endothelium-dependent and -independent) in healthy patients and those with CVD. Importantly, we used an easy-to-use handheld device that can be easily translated to clinical settings. Our results indicate that baseline microvascular impairments in structure and function can be detected using the CytoCam technology, although reactivity to acetylcholine may be maintained even during disease in the peripheral microcirculation.

Barriers and Facilitators for Usage of Self-Compacting Concrete—An Interview Study

Workers in the construction industry must endure different weather conditions, long working hours, and engage in repetitive and strenuous jobs with unrealistic deadlines. Sick leaves, caused by accidents and by work-related diseases, are common in the construction industry. Hand–arm vibration from hand-held power tools is a cause of significant ill health (disorders of the blood vessels, nerves, and joints). Self-compacting concrete (SCC) is a fluid concrete and does not need to be vibrated. Despite the health advantages of SCC, its market share in Sweden is lower than in comparable countries. The aim of this article is to describe views, opinions, and knowledge concerning the work environment and health in concrete casting and to identify barriers and facilitators of SCC usage. Semi-structured interviews were conducted with 24 interviewees from the construction industry in Sweden. The answers were analysed from a human–technology–organisation (HTO) perspective in order to identify barriers and facilitators for a broader usage of SCC. The results indicate that knowledge about SCC is low within the Swedish construction industry, including educational institutions; when SCC is chosen, it is chosen exclusively due to its technical characteristics, and not because it eliminates vibrations. Barriers to a broader usage of SCC comprise an incomplete knowledge base, clients who never choose it, recipes that are said to be too demanding, and workplace traditions. Facilitators comprise large companies investing in knowledge development about SCC and engaged persons promoting it. This study used an HTO-based model (BTOH) to identify barriers and facilitators for a broader usage of SCC, thus contributing to a deeper understanding of reasons for the low usage of SCC and ways of increasing it.

Hand-Arm-Vibrationsdosis und arbeitstechnische Voraussetzungen für die Berufskrankheit Nr. 2103 – Eine epidemiologische Fall-Kontroll-Studie

Hand-arm vibration dose and work-related requirements for occupational disease no. 2103 – An epidemiological case-control study Background: An epidemiological case-control study of dose-effect relationships between hand-arm vibration exposure and musculoskeletal disorders of occupational disease no. 2103 (BK 2103) was carried out in order to provide evidence-based recommendations for the recognition of BK 2103. Methods: Male cases and controls were recruited and standardised personal interviews were conducted between 1 January 2010 and 30 November 2021. In addition to leisure activities and comorbidities, work histories regarding the use of hand-operated and hand-held technical tools that can induce hand-arm vibrations were recorded in detail. To quantify the individual vibration exposure, a database of industrial hygiene measurements of vibration values of over 700 technical power tools was established (vibration register). The vibration measurements recorded in the database allows quantification of the daily dose and lifetime dose of the vibration exposure. The dose-effect relationships between hand-arm vibration exposure and musculoskeletal disorders as defined by BK 2103 were quantified for the various dose models using conditional logistic regression analyses. Results: In total, 209 cases and 614 controls were recruited. Compared to controls, cases suffered more frequently from gout, arm fractures, hip osteoarthritis, knee osteoarthritis, spinal osteoarthritis and trauma injuries or inflammatory conditions of the finger, elbow and shoulder joints. After adjusting for relevant confounders, the study analyses demonstrate consistent and statistically significant dose-effect relationships between hand-arm vibration exposure and musculoskeletal disorders as defined by BK 2103. A vibration dose of Dhv = 142.331 m2/s4 x day or Dhw = 38.724 m2/s4 x day is associated with a doubling of the risk of musculoskeletal disorders of the upper extremities as defined by BK 2103. Conclusions: These dose values serve as a guide and could also be applied in an assessment of the work-related requirements for the recognition of BK 2103. Sensitivity analyses indicate that an exposure duration with a defined threshold daily dose is not suitable for guiding the recognition of BK 2103. Keywords: hand-arm vibration – musculoskeletal disorders – dose-effect relationship – epidemiology – risk-doubling dose

A New Handheld Tool to Select the Correct Tibial Insert Thickness by Measuring the Force to Push a Trial Insert Into Position During Total Knee Arthroplasty Surgery

Abstract During total knee arthroplasty (TKA) surgery, an important step is determining the correct insert thickness for each patient. If the insert is too thick, then stiffness results. Or conversely, if the insert is too thin, then instability results. One common method used to determine the insert thickness is by manually assessing the joint laxity; this is a qualitative method that depends on the surgeon's experience and “feel” and is unreliable. The lack of objective methods to reliably determine the correct insert thickness creates a need to develop such a method. One possible method is to measure the force required to push a trial insert into position, requiring a specialized tool to measure the push force. Hence, a new measuring tool was designed to measure the push force intra-operatively, accurately, and safely. To demonstrate functionality, the tool was tested on three patients. During the tests, the surgeon determined the appropriate thicknesses of the insert to trial and proceeded to position three different insert thicknesses ranging from 10 mm to 12 mm, and example push forces were recorded. The new tool met all the design criteria, and the example results from the patient testing show potential in using the peak push force to identify the insert with the correct thickness.

Effect of noise and hand-transmitted vibration exposure on hearing and equilibrium under a simulated work environment with building tools.

Construction workers are exposed to hand-transmitted vibration (HTV) and/or noise caused by vibrating hand tools in the work environment. The present study aims to investigate the effects of exposure to HTV and/or noise on workers' hearing loss and body balance. Forty construction workers were exposed to HTV (10 m/s2 rms, 31.5 Hz) and/or typical construction noise (90 dBA) in three simulated experiment scenarios with the vibrating hand-held tool for 30 minutes over three days. The hearing loss from 1000 to 6000 Hz and the body balance were determined before and after each exposure scenario. Separate noise exposure at all frequencies except for 1000 Hz could significantly affect hearing threshold levels (p-value<0.05). Separate exposure to HTV cannot lead to a remarkable effect on hearing loss (p-value>0.05); however, it can synergistically increase the effect of noise on hearing loss. Also, the affected frequency range in concurrent exposure has been greater than in separate noise exposure. The separate effects of exposure to HTV and noise on the subjects' body balance were not statistically significant (p-value>0.05); however, these effects became significant in concurrent exposure (p-value<0.05). Based on the estimated effect sizes, noise could synergistically increase the observed effect of HTV on body balance. There is a synergistic interaction between HTV and noise on hearing loss and body balance. It seems necessary to pay attention to the risk evaluation of simultaneous exposure to noise and HTV when setting the occupational action limit values.

Health and Safety Executive research on wood dust exposure controls in British manufacturing.

To generate new intelligence on occupational exposure to wood dust in woodworking manufacturing activities in Britain, the Health and Safety Executive (HSE) performed 22 occupational hygiene site visits to assess exposure and exposure controls between 2014 and 2017. The work aimed to characterise good practice and therefore sites with a poor health and safety record, as identified from HSE inspection records, were not invited to participate. Sites selected covered furniture production, joinery, saw milling, and boat building and repair. Twenty-three follow-up telephone interviews were also carried out across 15 of the companies with supervisors and managers to explore how they tried to promote good practice among the workforce, and if there are any potential challenges encountered. The aim of the interviews was to gain a better understanding of how to enable organisations to improve the management of wood dust exposure. This study found that 6.0% of all wood dust exposure measurements (15 out of 252) were above 5 mg/m³, and 17.6% of exposures to hardwood dust or mixtures of hardwood and softwood dust (38 out of 216) were above 3 mg/m³ (the then current and future workplace exposure limits). Sanding, cleaning, and maintenance activities were of particular concern. Improvements to exposure controls are required, in particular, improvements to local exhaust ventilation controls for hand-held power tools and hand sanding. The management, selection, and use of respiratory protective equipment were poor. All the managers and supervisors recognised that exposure to wood dust can pose serious health risks, and that controls were crucial to protecting workers' health. The findings from the telephone interviews suggest that supervision and provision of information about the health effects of exposure to wood dust were common approaches that organisations used to raise awareness and promote good practice, in relation to managing wood dust exposure. Worker attitudes towards controls, such as perceptions that they hinder task completion and habitual ways of working, were identified as factors influencing the use of controls. Risk communication approaches that focus on increasing workers' awareness of their susceptibility to ill-health using credible sources, such as peers, can help enhance the uptake of messages on the use of controls. Financial constraints were identified as a challenge to improving the control of wood dust, particularly for small companies.

Action does not drive visual biases in peri-tool space.

Observers experience visual biases in the area around handheld tools. These biases may occur when active use leads an observer to incorporate a tool into the body schema. However, the visual salience of a handheld tool may instead create an attentional prioritization that is not reliant on body-based representations. We investigated these competing explanations of near-tool visual biases in two experiments during which participants performed a target detection task. Targets could appear near or far from a tool positioned next to a display. In Experiment 1, participants showed facilitation in detecting targets that appeared near a simple handheld rake tool regardless of whether they first used the rake to retrieve objects, but participants who only viewed the tool without holding it were no faster to detect targets appearing near the rake than targets that appeared on the opposite side of the display. In a second experiment, participants who held a novel magnetic tool again showed a near-tool bias even when they refrained from using the tool. Taken together, these results suggest active use is unnecessary, but visual salience is not sufficient, to introduce visual biases in peri-tool space.

Revisiting the U-Shaped Elevator for Zygomaticomaxillary Fracture: Study and Comparison of Elevators for Zygomaticomaxillary Fracture Reduction.

The authors present the case of a 15-year-old male who sustained a unilateral zygomaticomaxillary complex fracture and underwent open reduction and rigid internal fixation, for which a U-shaped elevator was utilized. The authors discuss techniques in reduction and fixation of zygomaticomaxillary complex fractures, focusing on the use of various elevators during reduction, including straight-type and curved elevators. The U-shaped elevator is a handheld tool with bilateral symmetrically curved ends that is seldom used, despite its specific benefits including nonslip serrated tips, symmetrical nature that allows for direct loading needed for accurate reduction, visualization of the fracture site, and avoidance of tissue compression during elevation.

Low-cost prototyping of nitinol wires/frames using polymeric cores and sacrificial fixtures with application in individualized frames anchoring through the atrial septum

Self-expanding frames for minimally invasive implants are typically made from nitinol wires and are heat treated to maintain the desired shapes. In the process of heat treatment, nitinol structures are placed in a high-temperature oven, while they are confined by a fixture. During this process, nitinol exerts a high amount of force. Accordingly, a fixture requires high mechanical strength and temperature resistance; this is why fixtures are typically made from metals. The use of metal fixture also increases the turnaround time and cost. However, accelerating this process is beneficial in many applications, such as rapid development of medical implants that are patient-specific. Inspired by the use of sacrificial layers in microfabrication technology, here we propose a novel method for shape setting nitinol wires using a sacrificial metal fixture. In this process, the nitinol wires are first aligned inside copper hypotubes. Next, the forming process is done using hand-held tools to shape complex geometrical structures, annealing the nitinol reinforced by copper, and then selectively etching copper hypotubes in ammonium persulfate solutions. In this process, other sacrificial cores, which are 3D printed or cast from low-cost polymers, are also used. This combination of polymeric cores and minimal use of metals enables reducing the cost and the turnaround time. As a proof of concept, we showed that this process was capable of fabricating springs with mm or sub-mm diameters. The result showed a change of less than 5% in the intended diameter of the nitinol spring with diameters ranging from ~ 0.7 to 1.9 mm, which confirms copper as a suitable sacrificial fixture to obtain the desired complex geometry for nitinol. A metric, based on the elastic strain stored in copper is suggested to predict the possible variation of the intended dimensions in this process. Finally, to demonstrate the potential of this method, as proof of concept, we fabricated NiTi wire frames designed for anchoring through the atrial septum. These frames demonstrated septal defect occluders that were designed based on a patient’s cardiac image available in the public domain. This low-cost rapid fabrication technique is highly beneficial for a variety of applications in engineering and medicine with specific applications in rapid prototyping of medical implants.

Bioprint FirstAid: A handheld bioprinter for first aid utilization on space exploration missions

Human exploratory missions to Moon or Mars are considered the next steps in human space exploration. Such activities result in the exposure of humans to the space environment for long time, especially under the constraints of orbital dynamics as with increasing distances from earth quick return possibilities are ruled out. Crews on these kinds of missions must be self-sustaining in medical treatments, as environmental conditions in space, such as the influence of altered gravity, radiation or isolation, raise health issues. Therefore, astronauts may use the here presented Handheld Bioprinter as part of the first-aid strategy for in situ wound treatment. The device consists of a handle capable of holding an exchangeable “Ink Printing Unit” containing two separate gel-like components (Bioink and Crosslinker), which are extruded during a printing process through a nozzle and form a skin-cell containing bioink band-aid. For ISS experiments cell simulants were used, as in-space experiments first demonstrated the general feasibility of handheld bioprinting under space conditions. On-ground human skin cells were mixed with the biogel, printed via the handheld bioprinter and cultivated, to demonstrate the overall feasibility of the “Bioprint FirstAid” technology. Concluding results were that a mobile, handheld tool like the bioprinter shows good applicability and offers a possibility of in situ wound treatment for in-space applications. The “Bioprint FirstAid” project was coordinated by the German Space Agency at the German Aerospace Center (DLR) in Bonn and funded by the Federal Ministry for Economic Affairs and Climate Action (BMWK).