Hair Surface Research Articles

Liquid dispensing in the adhesive hairy pads of dock beetles.

Many insects can climb on smooth inverted substrates using adhesive hairy pads on their legs. The hair-surface contact is often mediated by minute volumes of liquid, which form capillary bridges in the contact zones and aid in adhesion. The liquid transport to the contact zones is poorly understood. We investigated the dynamics of liquid secretion in the dock beetle Gastrophysa viridula by quantifying the volume of the deposited liquid footprints during simulated walking experiments. The footprint volume increased with pad-surface contact time and was independent of the non-contact time. Furthermore, the footprint volume decreased to zero after reaching a threshold cumulative volume (approx. 30 fl) in successive steps. This suggests a limited reservoir with low liquid influx. We modelled our results as a fluidic resistive system and estimated the hydraulic resistance of a single attachment hair of the order of MPa · s/fl. The liquid secretion in beetle hairy pads is dominated by passive suction of the liquid during the contact phase. The high calculated resistance of the secretion pathway may originate from the nanosized channels in the hair cuticle. Such nanochannels presumably mediate the transport of cuticular lipids, which are chemically similar to the adhesive liquid.

(Invited) Post-CMOS Compatible Silicon MEMS Nano-Tactile Sensor for Touch Feeling Discrimination of Materials

Semiconductor silicon has realized various kinds of valuable electron devices. CMOS technology is the present standard silicon process to fabricate integrated circuits and systems. Therefore, the word “Post-CMOS” has been an important word which means that the technology makes it possible to fabricate various kinds of MEMS sensors/actuators/passives with highly sophisticated modern CMOS devices. Also, it emphasizes that MEMS devices fabricated by post-CMOS technology has “high compatibility” with “silicon FABs” that are most universal and distributed fabrication facilities in the world. High performance devices and fine microstructures can be fabricated by universal post-CMOS fabrication processes at present.Post-CMOS compatible process is a key technology to realize ultra-high-performance silicon MEMS tactile sensors in this study. We, humans have very sophisticated sense of touch on our fingertip skin, and we can recognize and distinguish various and delicate difference of touch feelings obtained by “sweep motion” of fingertip on various kinds of materials and objects. Our fingertip skin has the highest density of force and vibration (mechanical) receptors like Meissner’s corpuscles and Merkel disks under the surface skin layer where fine pitch patterns of fingerprint are formed on. It is known that human’s fingertip has a very high spatial resolution below 100µm or less, and can recognize existence of 13nm-pitch patterns as reported recently. The high performance of our fingertip sense of touch has never been realized by any tactile sensor device. In order to reproduce artificial sense of touch like the fingertip, very high performances on “spatial resolution” and “input sensitivities” are required to integrate all on a small tactile sensor. Therefore, CMOS-compatible fabrication technology is the most suitable process to fabricate such high-performance tactile sensors with integrated functions.Based on a silicon post-CMOS compatible process, we have realized high performance silicon MEMS tactile sensor called “Nano-tactile sensor”, which is comparable to the performance of fingertip sense of touch. In this tactile sensor device, all the mechanical structures are made from single crystalline silicon which is the active layer of SOI wafers. No elastomer/polymer structures are used in the mechanical sensing structure, and softness and elasticity necessary to tactile sensing are realized by silicon micro mechanical structures. All the fine mechanical movements and sensing circuits with strain-sensitive diffusion resistors (i.e. piezoresistors) are designed by 2D-CAD, and the characteristics can be controlled by layout pattern sizes. The contactor parts of the tactile sensor have curved shape which is similarly designed to the cross-section of a fingerprint, and its suspension springs are designed to have similar spring constant with human’s fingertip skin surface.In the latest version of our “Nano-tactile sensors”, six contactors with fingerprint-like shape are integrated at a pitch of 500µm to get distributed tactile images at a high spatial resolution. The pitch of 500µm corresponds to the average value of human’s fingerprint patterns. Each fingerprint-like contactor reproduces vertical motion (by micro roughness) and horizontal motion (by frictional force) of a fingerprint closely under sweeping motion of fingertip in touch feeling measurement. Spatial resolution of our tactile sensor reaches to sub-micron (200nm) in the finest version, and its force resolution of input reaches below 50µN range. These high performances are enough high to reproduce part of our fingertip sense of touch. The Nano-tactile sensors can get touch feeling waveforms of “hair surface condition”, “skin texture and the condition”, and touch feelings of various kinds of “papers” and “clothes” at a high spatial resolution like our fingertip skin. In the lecture, experimental results of very high-resolution tactile sensing are presented, and their importance and novelty are discussed.Machine learning based on deep neural network (DNN) has become very important for sensing data analysis. We think DNN is very important to understand/reproduce human sense of touch since a trained DNN behaves similarly with human’s senses based on our experiences. Since a lot of sample data are required for such applications, we have developed a measurement system called “Touch-Feeling Scanner”. A number of tactile sensing data can be measured by the touch-feeling scanner integrating a Nano-tactile sensor device. Obtained signals with the scanner were applied to train a DNN for discrimination of different kinds of clothes. 10 kinds of cloth samples have been successfully discriminated at a correct percentage over 95% as an example. Combination of high-resolution Nano-tactile sensors and state-of-the-art machine learning (DNN) is a strong approach to reproduce human fingertip sensation for various valuable applications. Figure 1

(Invited) Post-CMOS Compatible Silicon MEMS Nano-Tactile Sensor for Touch Feeling Discrimination of Materials

Based on silicon post-CMOS compatible process, we have realized high performance silicon MEMS tactile sensor called “Nano-tactile sensor”, which is comparable to the performance of fingertip sense of touch. In this tactile sensor device, all the mechanical structures are made from single crystalline silicon which is the active layer of SOI wafers. No elastomer/polymer structures are used in the mechanical sensing structure, and softness and elasticity necessary to tactile sensing are realized by silicon micro mechanical structures. In the latest version of our tactile sensors, six contactors with fingerprint-like shape are integrated at a pitch of 500µm to get high spatial resolution tactile images. Each fingerprint-like contactor reproduces vertical motion (by micro roughness) and horizontal motion (by frictional force) of a fingerprint closely under sweeping motion of fingertip in measurement. The performances are enough high to analyze surface touch feelings of “Hair surface condition”, “Skin condition”, and “Touch feeling of various papers and clothes” like human fingertip. Combination of high-resolution tactile sensor and deep neural network is a strong approach to reproduce human fingertip sensation by state-of-the-art device electron device technology.

Integral characterization of normal and alopecic hair at different degeneration stages by in-situ visible and chemical imaging.

Direct exploration to differences between normal hair (NH) and alopecic hair (AH) at different degeneration stages is still lacking. To reveal compositional and structural variation of AH with reference to NH internally and externally, infrared spectroscopic imaging combined with scanning electron microscopy was applied to investigate integral changes of hair chemical profiles and surface texture structures, and infrared macro-fingerprinting analysis revealed detailed chemical compositions of NH and AH. Results showed that AH had excessive irregular laminated structures compared to NH, leading to a lower weight bearing capacity. Spatial distributions of lipids, phosphates, lipoproteins and phospholipids in hair transverse sections showed that their infrared absorptions were intensified and gradually centralized to medulla with average variable-areas increasing upto 2.3 folds (lipoproteins area changed from 13% in NH to 30% in AH)as the alopecia progressed. Extracted pixel spectra from the chemical images showed different fingerprint characteristics in 1075-1120cm-1. Specifically, compared to NH, AH showed red shift of phosphate peaks, indicating the occurrence of phosphates transformation. In this study, in-situ visible and infrared chemical imaging directly revealed more irregular laminated scalps with decreasing weight bearing capacity and increasing distributive areas expanding to medulla of key components (phosphates, phospholipids, etc.) that were relevant to alopecia development from NH to AH, and offered a fast, eco-friendly and effective method for hair research.

Simultaneous analysis of typical halogenated endocrine disrupting chemicals and metal(loid)s in human hair

Hair analysis has been an important approach in evaluating population exposure to various environmental factors. To meet the requirements of human environmental epidemiology studies, we aimed to develop an efficient method for simultaneous analysis of various metal(loid)s and some typical environmental halogenated endocrine disrupting chemicals (hEDCs) (i.e., polychlorinated biphenyls, polybrominated diphenyl ethers, and organochlorine pesticides, as well as some of their hydroxyl substituted metabolites) in a single hair sample. The hair was washed successively with surfactant solutions, methanol solvent, and deionized water to remove impurities attached to the hair surface. Efficiency was comprehensively compared among various washing strategies. The hair sample was further pulverized into fine powder with a median diameter (25th–75th percentile) of 8.6 (5.9–13.5) μm. The hair organic components were extracted by acetonitrile solvent and compared with the microwave-assisted extraction method. The hEDCs in the supernatant acetonitrile phase were quantified by gas chromatography–mass spectrometry, and the metal(loid)s in the precipitate hair were further analyzed by inductively coupled plasma mass spectrometry. Our developed method was further applied to analyze the hair samples of 165 pregnant women. The results showed that particles attached to the surface of the hair could not be washed off completely. However, we proposed a protocol framework to wash hair with relatively high efficience, which includes warm water incubation, and use of surfactant and organic solvent. The recoveries of the concerned hEDCs and metal(loid)s were overall in the range of 80% to 120%. For the women population, the method can efficiently recognize the typical exposure characteristics of the concerned hEDCs and metal(loid)s. Our study significantly ameliorated the deficiencies of the traditional hair washing strategy and developed an efficient method for simultaneous analysis of various metal(loid)s and hEDCs in a single hair sample. This method will provide important support for population complex exposure analysis and facilitate environmental exposome studies.

New insights into human hair: SAXS, SEM, TEM and EDX for Alopecia Areata investigations.

BackgroundAlopecia areata (AA) is a T-cell-mediated autoimmune disease and affects up to 2% of the population. There is a need for a more profound and rigorous understanding of the structure and composition of human hair affected by AA in order to manage this disease. The aim of this article is to understand the effects of AA on the structure and composition of human hair.MethodsSeveral physico-chemical investigation methods, such as Scanning Electron Microscopy (SEM), Transmission Electron Microscopy (TEM), Energy-Dispersive X-ray Spectroscopy (EDX), and microbeam Small Angle X-ray Scattering (SAXS), were used to analyze human hair samples obtained from healthy donors and patients with AA.ResultsSEM revealed more severe hair surface defects for the white regrown hair (W-AA) samples. TEM showed the presence of air-like vesicles located in the endocuticle of regrown hair. Analysis of ultrathin sections of W-AA showed the existence of empty vesicles and smaller melanin granules compared to control samples. SAXS demonstrated that unaffected hair of patients with AA (B-AA) and W-AA melanin aggregates are different in their sizes and shapes compared to the control samples. EDX data showed that W-AA elemental composition was significantly different from the other sample groups. Our study showcases promising non-invasive techniques for a better and more accurate understanding of changes in the internal structure and composition of hair affected by AA.

Automated analysis of scanning electron microscopic images for assessment of hair surface damage.

Mechanical damage of hair can serve as an indicator of health status and its assessment relies on the measurement of morphological features via microscopic analysis, yet few studies have categorized the extent of damage sustained, and instead have depended on qualitative profiling based on the presence or absence of specific features. We describe the development and application of a novel quantitative measure for scoring hair surface damage in scanning electron microscopic (SEM) images without predefined features, and automation of image analysis for characterization of morphological hair damage after exposure to an explosive blast. Application of an automated normalization procedure for SEM images revealed features indicative of contact with materials in an explosive device and characteristic of heat damage, though many were similar to features from physical and chemical weathering. Assessment of hair damage with tailing factor, a measure of asymmetry in pixel brightness histograms and proxy for surface roughness, yielded 81% classification accuracy to an existing damage classification system, indicating good agreement between the two metrics. Further ability of the tailing factor to score features of hair damage reflecting explosion conditions demonstrates the broad applicability of the metric to assess damage to hairs containing a diverse set of morphological features.

Nanostructured lipid carriers: A novel hair protective product preventing hair damage and discoloration from UV radiation and thermal treatment

The goal of this study was to investigate the protective effects of nanostructured lipid carriers (NLCs) and vitamin E loaded NLCs (Vit E-NLCs) on preventing hair damages and discoloration against UV radiation and thermal treatment. The NLCs and Vit E-NLCs were prepared using a high-pressure homogenization technique. At optimal conditions, they showed spherical particles with a mean particle size of ~140 nm and a polydispersity index of < 0.3. Up to 90% (w/w) vitamin E acetate incorporation efficacy was achieved. The protective efficacy of the model cream containing blank-NLCs (NLCs cream) or Vit E-NLCs (Vit E-NLCs cream) was investigated. Upon exposure to UV-light and heat, the FE-SEM images revealed that the hair treated with both NLCs creams showed a smoothness of hair surface similar to the virgin hair. In accordance with protein loss, they exhibited the least protein loss as compared to the hair treated with Vit-E cream, cream base and commercial products. The same trend was observed for the discoloration test, the hair treated with both NLCs creams demonstrated the lowest total color loss, as compared to other products. Comparing between two NLCs formulations, antioxidant Vit E-NLCs showed to promote the photoprotective effect against hair damage and discoloration slightly greater than blank NLCs, but it has no extra benefit for heat protection. Considered overall, the developed NLCs and Vit E-NLCs is a novel alternative for preventing hair damage and discoloration from daily UV and heat exposure.

Hair surface quality: Laser scattering as a tool for characterizing the surface condition and deposits from shampoos and conditioners.

The hair surface condition underlies many visually perceived attributes such as shine, colour and the 3D perception of a curly hair style. Many factors can alter the hair surface such as cumulated cleansing/styling regimens or chemical treatments which can lead to degradation of the cuticle edges and surface. Similarly, pollutants, sebum, and shampoo/conditioners can build up on the hair surface which are also perceivable to an observer. The highly directive light of a laser is reflected and scattered by the surface of hair fibres into a circular pattern. The angular and spatial characteristics of this pattern reflect the hair geometry and the quality of the hair surface, i.e. the outer cuticle layer. Dark flat hair tresses were used to measure the impact of artificial sebum and shampoo/conditioner regimens on the cuticle surfaces. Also, longer single hair fibres from 4 volunteers were characterized for their surface changes from roots to tips, i.e. over the chronological age of the hair. The laser scattering shows clear changes in specular reflection characteristics from treatments and allows for the extraction of the cuticle inclination angle with respect to the hair axis. Deep cleansing or clarifying shampoos do partially restore the cuticle angle by removing residues on the hair surface whereas more conditioning systems can lead to changes in specular reflection angle and scattering, especially for multiple cycles of shampoo+conditioner treatments. Lastly, changes in hair surface can be traced over time of hair age by this approach and are consistent with frequency and nature of hair treatments. The method shows great potential for characterizing cleansing regimens in terms of their impact on the hair surface, either as single or multiple washes. Coverage or damage to the hair cuticles appears readily as an angle shift of the specular reflection whereas the quality of the surface topology has a direct impact on the angular width of the specular reflection thus affecting the shine band on a person's head. Hair ageing from root to tip can be quantified by laser scattering and correlates well with treatment events in time.

Heavy metal accumulation and distribution in Phragmites australis seedlings tissues originating from natural and urban catchment.

The retention of heavy metal (HM) was studied in root and rhizomes (BLG), stems (ST), and leaves (LF) of Phragmites australis (common reed) seedlings collected from different locations, differing in the scale of anthropogenic interference. The analysis includes the reference samples of sediments in uncontaminated lake Garczonki and contaminated roadside ditch in Cieplewo. The concentrations of Zn, Cu, Pb, Cd, Ni, and Cr were analyzed in plant tissues and sediments using the atomic absorption spectrometry and inductively coupled plasma mass spectrometry. The general assessment of sediments collected in the Garczonki lake showed a good environmental status; while in the roadside ditch in Cieplewo, the sediments were considerably polluted with HM. In the first stage of plant growth, all of the analyzed HMs are mainly inhibited by BLG system. The decreasing trend of elements was as follows: BLG > ST > LF. The organs followed different decreasing trends of HM concentration; the trend Zn > Cu > Ni > Cr > Pb > Cd was found in ST and LF for the Garczonki lake seedlings and for BLG and LF for the roadside ditch in Cieplewo seedlings. Zn showed the highest concentration, while Cd the lowest concentration in each of the examined organs. The bioaccumulation factor indicated the higher mobility of HM in seedlings in the Garczonki lake than in the roadside ditch in Cieplewo. The morphological studies suggest the good state and health of seedling from both sites; however, the reduction of root hair surface was observed for the roadside ditch seedlings. The anatomical studies present changes in the size of the nucleus and count of chloroplasts in LF. No reaction on HM contamination sediments in the seedlings from the roadside ditch in Cieplewo in the aerenchyma was noted. Potentially, both types of seedlings can be used to decontaminate environments rich in HM. However, the level of HM absorbed by seedlings (in the first stage of growth) should be considered due to the behavior in the target phytoremediation site.

Dermatologic conditions in women receiving systemic cancer therapy.

As advances in cancer therapies have improved cancer-related survival, novel therapeutics have also introduced a variety of dermatologic toxicities, and an increased number of patients are living with these sequalae. Women with cancer in particular experience a spectrum of dermatologic conditions that affect their skin, hair, nail, and mucosal surfaces. Studies have shown that these toxic effects can significantly affect quality of life and alter a woman’s self-image, cultural identity, femininity, sexuality, and mental health. In severe instances, dermatologic toxicities may even disrupt cancer therapy and can therefore affect overall survival and treatment response. In this article, we review the dermatologic adverse effects from traditional chemotherapy, targeted therapy, immune checkpoint inhibitors, and endocrine therapy that disproportionately affect women. The timely diagnosis and management of these dermatologic conditions is crucial in the multidisciplinary care of women with cancer.

Effects of newly devised plasma lice comb on human hair

A plasma device was developed showing high potential for a pesticide-free treatment of pediculosis. As a first safety assessment of the device was presented earlier, this present paper focuses on the damage introduced to human hair during a plasma treatment for pediculosis control. Therefore, human hairs were treated repeatedly to assess the possible occurring damage developing with increasing treatment durations. To analyse the inflicted changes on human hair examinations using x-ray photoelectron spectroscopy (XPS/ESCA), scanning nearfield optical microscopy (SNOM) and scanning electron microscopy were conducted, to compare the modifications of surface chemistry and mechanical alterations. The investigations revealed a mild impact on the surface chemistry (XPS/SNOM), while more distinct morphological changes on the hair surface could be observed. The authors conclude that an effect of the plasma comb device on the hair during a real-life treatment is negligible, due to the very short contact times during a standard combing procedure for pediculosis control.

Effect of Propolis-treated Hair Conditoner on Damaged Hair

This study investigated the effects of hair conditioner containing the beehive protectant propolis on damaged hair. The results found the following: First, according to the analysis of healthy hair and the amino acids of propolis, the propolis amino acids matched the hair amino acids in 15 ingredients. Second, according to the comparative analysis of hair thickness and weight after applying the hair conditioners by propolis content, significant results were found in all experimental groups but the Control Group. The biggest increase was found in the 3% propolis-treated Experimental Group III. Third, according to the comparative analysis of hair sebum and moisture, significant results were observed in all experimental groups. In particular, the largest increase in moisture was found in Experimental Group III. Fourth, in terms of changes in hair surface color, b* were the lowest while a* was the highest in Experimental Group III. Fifth, the surface observations by SEM showed that, taking a look at the SEM of Damaged Hair, the porosity and damaged cuticle was covered by the protein contained in the propolis. Therefore, it may be said that propolis would be useful as an active ingredient.

Automated Measurement of Spatially Resolved Hair-Hair Single Fiber Adhesion.

The adhesion force between individual human hair fibers in a crosshair geometry was measured by observing their natural bending and adhesive jumps out of contact, using optical video microscopy. The hair fibers' natural elastic responses, calibrated by measuring their natural resonant frequencies, were used to measure the forces. Using a custom-designed, automated apparatus to measure thousands of individual hair-hair contacts along millimeter length scales of hair, it was found that a broad, yet characteristic, spatially variant distribution in adhesion force is measured on the 1 to 1000 nN scale for both clean and conditioner-treated hair fibers. Comparison between the measured adhesion forces and adhesion forces modeled from the hairs' surface topography (measured using confocal laser profilometry) shows they have a good order-of-magnitude agreement and have similar breadth and shape. The agreement between the measurements and the model suggests, perhaps unsurprisingly, that hair-hair adhesion is governed, to a first approximation, by the unique surface structure of the hairs' cuticles and, therefore, the large distribution in local mean curvature at the various individual contact points along the hairs' lengths. We posit that haircare products could best control the surface properties (or at least the adhesive properties) between hairs by directly modifying the hair surface microstructure.

Effects of endophyte-infected tall fescue seed and protein supplementation on stocker steers: I. Growth performance and hemodynamic responses

Fescue toxicosis is a multifaceted syndrome common in cattle grazing endophyte-infected tall fescue and is detrimental to growth and performance. Recent research has shown that supplementing protein has the potential to enhance growth performance in weaned steers. Therefore, the objective of this study was to evaluate the effect of supplemental CP on physiological parameters in stocker steers experiencing fescue toxicosis. Thirty-six weaned Angus steers (6 mo of age) stratified by weight (196.1 ± 3.6 kg) were assigned to a 2 × 2 factorial arrangement for 56 d: endophyte-free (EF) seed and 14% CP (EF-14; n = 9), EF seed and 18% CP (EF-18; n = 9), endophyte-infected (EI) seed and 14% CP (EI-14; n = 9), and EI seed and 18% CP (EI-18; n = 9). Steer growth and hemodynamic responses were collected weekly during ergot alkaloid exposure. On day 14 of the trial, iButton temperature data loggers were subcutaneously inserted in the lateral neck region to record hourly body temperature for 42 d. Data were analyzed using PROC MIXED of SAS with repeated measures. No differences were observed in DMI, BW, ADG, F:G, or BCS during the treatment period (P > 0.05). Hair shedding scores, rectal temperatures, surface temperatures, and respiration rates were greater in EI steers compared to EF steers regardless of supplemental CP (P < 0.05). However, subcutaneous body temperature was greater in EI-14 steers (37.94 °C) compared to other steer groups (37.60, 37.68, 37.72 ± 0.04 °C for EF-14, EF-18, and EI-18, respectively; P < 0.05). Prolactin concentrations tended to be greater in EF steers when compared to EI steers (P = 0.07). Heart rate and hematocrit were reduced for EI-18 steers compared to other steer groups (P < 0.05). Caudal artery diameter was reduced in EI-18 steers compared to EI-14 steers (2.60 vs. 2.75 ± 0.05 mm, respectively; P < 0.05) and caudal vein diameter was reduced in EI-18 steers (3.20 mm) compared to all other steer groups (3.36, 3.39, 3.50 mm for EF-14, EF-18, and EI-14, respectively; P < 0.05). However, there was no difference observed in systolic or diastolic blood pressure during the treatment period (P > 0.05). Based on the data, exposure to low to moderate levels of ergot alkaloids during the stocker phase had a negative impact on hemodynamic responses and supplemental CP had minimal impact to alleviate symptoms. Therefore, feeding additional protein above established requirements is not expected to help alleviate fescue toxicosis.

α-Chymotrypsin catalysed oligopeptide synthesis for hair modelling

Abstract Conventional chemical treatments imply the use of harsh chemicals which can cause serious adverse effects on consumers’ health, hair fibre and environment. In this work was reported for the first time the modelling shape of Asian hair by oligopeptide coating synthesized by a protease. α-Chymotrypsin from Bovine pancreas catalysed the oligomerization of the tri-peptides, KCL (Lysine-Cysteine-Leucine) ethyl ester and KSL (Lysine-Serine-Leucine) ethyl ester in aqueous media. The synthesis reaction gave rise to oligopeptides with DP = 6, which were characterized by mass spectra (MALDI-TOF). The in situ synthesis reaction onto the hair surface, under controlled pH (8.5–9) and temperatures between 25 °C and 55 °C, formed a coating layer inducing changes in the hair shape from straight to curly. Qualitative and quantitative characterization of coated hair was performed by image visualization and by perming efficiency assessment. The developed strategy revealed to be a safer and cleaner alternative to the conventional chemical treatments generally used for hair shape modification. Low cost associated to the catalyst and lower side effects to the hair fibre, health consumer and environment might lead to the development of a cost-effective and sustainable approach in the hair care industry.

Hair Structures Affecting Hair Appearance

Optical factors affecting hair appearance are reviewed based on hair structures from macroscopic to microscopic viewpoints. Hair appearance is the result of optical events, such as reflection, refraction, scattering, and absorption. The effects of hair structures on such optical events are summarized and structural conditions for hair appearance are considered. Hair structures are classified into the following: the alignment of multiple hair fibers, the cross-sectional shape of the hair fiber, and the microstructures of hair fiber (cuticle, cortex, and medulla). The alignment of multiple hair fibers is easily affected by the existence of meandering fibers and their alignment along hair length becomes less-synchronized. The less-synchronized orientation of multiple fibers causes the broadening of the apparent reflection and luster-less dull impression. The cross-sectional shape of hair fiber affects light reflection behavior. Hair fibers with elliptical cross-section show glittering colored light based on total reflection in the hair. The scaly structures of cuticles at the surface of hair are often uplifted and cause light scattering, and then affect hair luster. The porous structure of the cortex and medulla in hair fiber can cause light scattering and affect hair luster and color. The above phenomena suggest that important factors for hair appearance are the alignment of multiple hair fibers, appropriate cross-sectional shape, ordered scaly structure, and pore-less internal structure.

The Secrets of Beautiful Hair: Why is it Flexible and Elastic?

Beautiful hair, so called “SHINAYAKA” hair in Japanese, has a good appearance not only when stationary but also when in motion, and it is a highly desirable hair condition for Japanese consumers. We investigated such SHINAYAKA hair, which was selected by sensory evaluation, for the relationship between physical properties, such as flexibility and elasticity, and hair structure. It has already been reported that human hair cortical cells have two types, similar to wool: the ortho-like cortex and the para-like cortex. Microscopic observation revealed that the ortho-like cortex is distributed in the outer layer of the hair (near the hair surface) and the para-like cortex exists in the inner layer (near the center of the fiber). This cell distribution, a concentric double-layered structure, was deemed to be a characteristic of SHINAYAKA hair. Furthermore, analysis of physical properties showed the difference between the elasticity of the outer layer and inner layer, and that this difference was bigger in SHINAYAKA hair compared to other hair. This phenomenon was observed not only in Japanese hair, but also in Caucasian hair. In addition, we have developed a new technology for creating “SHINAYAKA” hair by treatment with succinic acid. Inflexible and inelastic hair can be changed by this treatment, and its flexibility and elasticity improve by selective reduction of stiffness of the outer layer.

Evolution of Hair Treatment and Care: Prospects of Nanotube-Based Formulations.

A new approach for hair treatment through coating with nanotubes loaded with drugs or dyes for coloring is suggested. This coating is produced by nanotube self-assembly, resulting in stable 2–3 µm thick layers. For medical treatment such formulations allow for sustained long-lasting drug delivery directly on the hair surface, also enhanced in the cuticle openings. For coloring, this process allows avoiding a direct hair contact with dye encased inside the clay nanotubes and provides a possibility to load water insoluble dyes from an organic solvent, store the formulation for a long time in dried form, and then apply to hair as an aqueous nanotube suspension. The described technique works with human and other mammal hairs and halloysite nanoclay coating is resilient against multiple shampoo washing. The most promising, halloysite tubule clay, is a biocompatible natural material which may be loaded with basic red, blue, and yellow dyes for optimized hair color, and also with drugs (e.g., antilice care-permethrin) to enhance the treatment efficiency with sustained release. This functionalized nanotube coating may have applications in human medical and beauty formulations, as well as veterinary applications.

Unique Hair Properties that Emerge from Combinations of Multiple Races

The fusion of ethnicity in human populations is becoming increasingly common, so the conventional definition of ethnicity is going to become deficient. The aim of this study was to investigate the hair properties which emerge from combinations of multiple races. Hair fibers collected from mixed-race subjects were investigated and classifications of hair shape as well as measurements of thickness, ellipticity and surface damage were carried out. The results show that hair shapes varied widely: straight hair and very curly hair often existed together on the heads of individuals with mixed ethnicity. Curly hair tended to be thicker than loose wavy hair. As for damage to the hair surface, the hairs of mixed-race subjects showed a very unique property in that they were much more severely damaged near the root (the proximal end) than the hairs of monoracial subjects. The hair shape (curly or loose wavy) was not related to the level of damage. The severe damage near the proximal end is thought to be caused by entanglement, due to the presence of various curl phases. This study reports the unique characteristics of hairs of subjects with mixed ethnicity, which have never been noted in the previous studies on subjects with a monoracial background.