Growth Trends Research Articles

Force-electric characteristics of model rock-filled concrete under uniaxial compression with different curing ages and rock-filled ratios

By analyzing the force-electric properties of rock-filled concrete under uniaxial compression, the precursor information and characteristics of deformation and failure of rock-filled concrete can be mastered, and the reliability and safety of rock-filled concrete structures at an early age can be ensured. This study investigated four variations of model rock-filled concrete, each with a distinct rock-filled ratio. Using the two-electrode alternating current test method, we analyzed the electrical resistivity properties of rock-filled concrete under uniaxial compression at various curing ages (1 d, 3 d, 7 d, 14 d, and 28 d). Additionally, the microscopic pore structure was examined using low-field nuclear magnetic resonance technology. The results showed that with increasing curing age or rock-filled ratio, the compressive strength and electrical resistivity of rock-filled concrete showed a nonlinear growth trend. In contrast, the porosity showed a nonlinear decrease, with the internal pore structure gradually becoming more refined. A mathematical model was established to describe the electrical resistivity of rock-filled concrete at various curing ages and rock-filled ratios. During uniaxial compression, the electrical resistivity of rock-filled concrete followed a pattern of rapid decline, slow decline, stable, and slow increase with strain. These phases corresponded to the development of internal pores and cracks and changes in the crack resistance performance of the rockfill skeleton in the concrete. Moreover, a mathematical equation was formulated to elucidate the relationship among the damage variable, the rock-filled ratio, and the electrical resistivity of model rock-filled concrete, thereby enabling the prediction of the extent of damage to the model rock-filled concrete under stress conditions.

The reference curves of percentile for the length and head circumference of infants aged 0–1 year in Hainan Province, China

We first established percentile reference curves for infant length and head circumference in Hainan Province based on gender and age in months and compared them with the 2022 national standards and World Health Organization (WHO) standards. This cross-sectional survey involved 2736 infants (1471 boys and 1265 girls) in 18 cities and counties in Hainan Province. Standardized instruments were used to measure head circumference and length. Reference values for Hainan infants' length and head circumference were determined using the LMS method. Curves were generated using the LMS Chart Maker software. According to the newly established reference curves, the length and head circumference of Hainan infants exhibited a consistent trend of steady growth. However, the average head circumference was below the 2022 national reference values and WHO standards. The mean length was lower than the new national reference values but roughly consistent with the WHO standards. Differences exist in infant length and head circumference in Hainan compared to national and global averages. To enhance infant length and head circumference growth, the health department should encourage exclusive breastfeeding for the first 6 months, ensure infants' sleep needs at night, and promote the regularity of vitamin D supplementation during the perinatal period.

Features of mechanization of work during the construction of buildings using low-rise construction technologies

Currently, in Uzbekistan, the low-rise housing construction sector is in a stage of dynamic development and, as a rule, is aimed at developing the territories of suburbs and agricultural areas. First of all, the trend of growth in the volume of low-rise residential construction is due to the fact that the construction of low-rise buildings is much less expensive in comparison with the construction of high-rise residential buildings. In addition, the operating costs of low-rise residential buildings are significantly lower than high-rise ones, since there is no need to install expensive engineering equipment (elevator equipment, high-power pumping equipment, fire protection systems, etc.). State programs in the field of providing the country's citizens with affordable and comfortable housing provide for a comprehensive reduction in its sales value, which is primarily achieved by reducing the cost of construction, including by reducing the consumption of fuel and energy resources (FER) during the construction of buildings.

Functionally graded fibre concrete constitutive model considering fibre spacing effects and interfacial interactions

The purpose of this paper is to establish a new constitutive model for functionally graded concrete (FGC) with high fiber content, considering randomly distributed cylindrical fibers and spherical, ellipsoidal, and cubic aggregates. Considering the fiber spacing coefficient and adjusting for the reinforcing effect of the fibers, the new correction factors include the fiber orientation coefficient, the fiber inclination impact coefficient, and the fiber spacing coefficient. Moreover, the interaction between the upper and lower interfaces of the FGC and the interaction between the fibers and the matrix are also considered. The interface adopts a cohesive bond-slip model to define interface plastic damage. The interaction between the fibers and the matrix is based on the rigid body-spring concept, where the matrix block is first discretized into rigid body-spring elements, which then interact with the fibers to produce bond-slip forces. During model validation, the proposed constitutive model was introduced into Abaqus using Python code. Finite element models for FGC, including the conventional uniaxial tensile model, dog-bone model, and four-point bending model, were established. The results indicate that for the FGC numerical computation model, the critical fiber volume fraction ρs ranges between 6 % and 7 %. However, the exact value should be determined based on specific practical conditions. When ρs is within the range of 0 %–6 %, the mechanical properties of FGC, such as peak stress, tensile strength, and toughness, increase with the increase in ρs. However, when ρs exceeds 6 %–7 %, the growth trend begins to slow down. In some cases, peak stress and tensile strength may decrease with an increase in ρs. At this point, the influence of the fiber spacing coefficient must be considered. Finally, by comparing with the experimental results, it is proved that the proposed constitutive model is feasible for studying the mechanical properties of FGC.

Analysis of the Impact of Urban Infrastructure on Urbanization Processes at Different Levels from a Spatiotemporal Perspective

A comprehensive understanding of the heterogeneity of urbanization development at different levels and its influencing factors is crucial for promoting global urbanization and advancing China’s new urbanization. Using indicators related to urbanization development, a multidimensional index system was constructed based on five dimensions: population, economy, space, society, and ecology. Employing methods such as the Mann–Kendall test, Sen’s trend analysis, multiple linear regression, and spatial autocorrelation analysis, the spatiotemporal evolution characteristics of urbanization from 2000 to 2019 were analyzed comprehensively at national, economic zone, provincial, and prefectural city scales. The results indicate the following. (1) From 2000 to 2019, urbanization levels at all levels showed an overall upward trend, with the national urbanization rate increasing most rapidly at 5.39%. (2) Trend analysis reveals rapid and significant growth trends in urbanization at the national and economic zone scales, while urban-level changes exhibit greater diversity and spatiotemporal heterogeneity. (3) Spatial distribution patterns show that urbanization levels in the eastern coastal economic zones are significantly higher than those in the northeastern economic zones, highlighting pronounced regional disparities in development and agglomeration effects in economically advanced regions and provinces. (4) Regression analysis demonstrates that spatial urbanization significantly influences urbanization development in China, with urban infrastructure playing a crucial role across different levels.

Automated Lumen Segmentation in Carotid Artery Ultrasound Images Based on Adaptive Generated Shape Prior.

Ultrasound imaging is vital for diagnosing carotid artery vascular lesions, highlighting the importance of accurately segmenting lumens in ultrasound images to prevent, diagnose and treat vascular diseases. However, noise artifacts, blood residue and discontinuous lumens significantly affect segmentation accuracy. To achieve accurate lumen segmentation in low-quality images, we propose a novel segmentation algorithm which is guided by an adaptively generated shape prior. To tackle the above challenges, we introduce a shape-prior-based segmentation method for carotid artery lumen walls. The shape prior in this study is adaptively generated based on the evolutionary trend of vessel growth. Shape priors guide and constrain the active contour, resulting in precise segmentation. The efficacy of the proposed model was confirmed using 247 carotid artery ultrasound images, with experimental results showing an average Dice coefficient of 92.38%, demonstrating superior segmentation performance compared to existing mathematical models. Our method can quickly and effectively perform accurate lumen segmentation on low-quality carotid artery ultrasound images, which is of great significance for the diagnosis of cardiovascular and cerebrovascular diseases.

Anatomical study of the C6 pedicle and lateral mass in children aged 0–14 years based on CT imaging

ObjectiveThis study aims to investigate the anatomical structure of the C6 pedicle and lateral mass in children aged 0–14 years using CT imaging, providing detailed insights into their growth and development.MethodsWe conducted a comprehensive measurement of C6. Measurements included width, length, and height of the pedicles, as well as the length, width, and thickness of the lateral masses, and several angular metrics. Regression analysis was performed to understand the growth trends, and statistical analyses were carried out to identify differences between age groups, genders, and sides.ResultsIn children younger than four years, the pedicle width exceeds its height, influencing the diameter of the pedicle screws. By age two to three, the pedicle height and lateral mass thickness reaches 3.0 mm, allowing for the use of 3.0 mm diameter screws. The pedicle transverse angle remains stable. Most parameters showed no significant differences between the left and right sides. Size parameters exhibited significant larger in males than females at ages 0–1, 3–7, and 10–12 years. Regression analysis revealed that the growth trends of size parameters follow cubic or polynomial curves. Most angular metrics follow cubic fitting curves without a clear trend of change with age.ConclusionThis study provides a detailed analysis of the anatomical development of the C6 pedicle and lateral masses in children, offering valuable insights for pediatric cervical spine surgeries. The findings highlight the importance of considering age-specific anatomical variations when planning posterior surgical fixation, specifically at C6. It is necessary for us to perform thin-layer CT scans on children and carefully measure various indicators before surgery.

Evaluation of beach nourishment in Mar del plata, Argentina: An application of the CoastSat toolkit

Sandy coasts play a crucial role in various human activities and support the economies of many coastal states. Due to their importance, coastal erosion mitigation techniques are often implemented. Among these techniques, beach nourishment is considered an environmentally acceptable method for coastal protection and restoration. In this work, a methodology for the evaluation of such projects is proposed and applied to the biggest beach nourishment project in the city of Mar del Plata, Argentina. The nourishment was carried out between 1998 and 1999 in Playa Grande (PG), Varese (V) and Bristol (B) bays. The CoastSat toolkit was implemented to obtain shoreline positions from satellite imagery and to derive a 36-year monthly time series of beach width in the region. For the analysis, three distinctives time lapses are identified: pre-intervention, response, and new equilibrium. An exponential decay function was fitted to determine the response lapse and its characteristics. Metrics such as mean beach width and trends were computed and used to compare the condition of beaches before and after the project. Results show that the region experienced a net growth after nourishment, with beach width doubling in Bristol and Playa Grande, and increasing tenfold in Varase. Nourishment did not alter the erosive trends of Playa Grande and Bristol, nor the growth trend of Varese. Regarding renourishment planning, according to our findings, for Playa Grande and Bristol beaches to achieve a net growth of 1 m, it would require the deposition of 17 m³ of sediment per meter of coastline. This study highlights the suitability of the CoastSat toolkit for assessing the effectiveness of beach regeneration.

Peri-urban dynamics: assessing expansion patterns and influencing factors

BackgroundPeri-urbanization, the expansion of large metropolitan centers into adjacent peri-urban regions, is a growing concern due to land scarcity and escalating housing costs. These zones, a blend of rural and urban features, blur the line between urban and rural areas, creating new landscapes. This study examines historical, present, and potential growth trends in the peri-urban area surrounding Durgapur Municipal Corporation (DMC). Analytical techniques and spatial metrics are used to track development intensity changes over time, including built-up density, Shannon’s entropy, Landscape expansion index, Average Weighted Mean Expansion Index, Annual Built-Up Expansion Rate, Built-Up Expansion Intensity Index, and Built-Up Expansion Difference Index. Landscape indices like Patch Density, Edge Density, Landscape Shape Index, Largest Patch Index, Ratio of Open Space, and Area Weighted Mean Patch Fractal are used to understand fragmentation, connectivity, and spatial relationships. The Logistic Regression Model (LRM) is used to identify influencing factors and CA-Markov modeling for future built-up areas.ResultsBetween 1991 and 2001, built-up area in the region increased significantly, primarily due to urban development near industrial zones, roadways, and mining areas. The growth was primarily concentrated in the western sector and near National Highway-2 (NH-2). Urban sprawl was a continuous trend, with the highest built-up density in the South-South-East (SSE) direction from 1991 to 2011. Additionally, a key determinant of built-up development was the distance to the city core. By 2031, the built-up area is expected to concentrate in the western and southeast regions, reaching 177.90 km2.ConclusionsThis expansion is attributed to urban development near industrial zones, roadways, mining areas, and other infrastructure. The study identifies distance to the city center as a significant influencing factor for built-up development. The results emphasize the need for inclusive urban planning methods prioritizing sustainable development principles and prudent resource management for future growth and efficient management in the DMC’s peri-urban area.

Assessing the Sustainable Development Level of the Tourism Eco-Security System in the Chengdu-Chongqing Urban Agglomeration: A Comprehensive Analysis of Dynamic Evolution Characteristics and Driving Factors

Based on the DPSIR framework, this study constructed an evaluation index system to assess the sustainable development levels of the tourism eco-security system (TESS-SDL) present in the Chengdu-–Chongqing urban agglomeration and synthesized multi-dimensional analysis methods to explore its spatiotemporal evolution characteristics and driving factors to provide an important theoretical and practical basis for promoting the sustainable development of the regional tourism eco-security system. The results showed the following: (1) From 2011 to 2021, the regional TESS-SDL was generally at a medium level and showed a trend of steady growth. Although the gap between cities was widening year by year, the speed of the TESS-SDL exceeded the speed of the widening gap, promoting the coordinated development of the regional TESS-SDL. (2) The spatial spillover effect of the regional TESS-SDL was obvious; however, the siphoning effects of Chongqing and Chengdu were strong, and the demonstration effect was insufficient. (3) The dynamic evolution process of the TESS-SDL shows a strong self-locking effect. The risk of downward development (lower sustainability) is greater than the potential for upward development (higher sustainability) and is significantly influenced by neighboring cities. (4) In terms for assessing the driving factors, open-door and green-development policies show positive facilitating effects, while the positive influencing capacities of information technology, economic development, and tourism are moving toward having negative effects; the influencing effect of technological innovation has transitioned from positive to negative.

Mechanical performance study of PVA fiber-reinforced seawater and sea sand cement-based composite materials

Due to the swift progress in the construction sector, there is a global concern about the potential scarcity of river sand and freshwater resources. The development of new construction materials is considered an inevitable trend for industry growth. PVA fibers, known for their strong corrosion resistance, cost-effectiveness, and high toughness, have the potential to enhance the corrosion resistance and seismic performance of structures in marine environments. However, their mechanical properties and durability in the seawater and sea sand environment are not well understood. Therefore, the investigation of the impact of seawater and sea sand on the mechanical properties and durability of PVA fiber-reinforced cement composites is considered crucial. A mechanical performance analysis of PVA fiber-reinforced seawater and sea sand fiber cement composites was conducted in this study. PVA fiber volume fractions of 0%, 0.75%, and 1.5%, cement composite matrix strength grades of C30 and C50, and curing periods of 28 days, 90 days, and 180 days were examined, investigating their influence on the bending toughness of PVA fiber-reinforced seawater and sea sand cement composites. Specific conclusions include the addition of fibers increased the peak bending load, had a less corrosive effect in seawater, and improved the flexural toughness of the material. The most significant improvement was observed at 1.5% fiber content, where the load-deflection curve was fuller and the energy absorption capacity of the material increased by 33–109%, maintaining good bending toughness. Furthermore, higher fiber contents are required for high-strength cementitious composites to improve flexural toughness and durability. The formulation of calculation formulas for predicting bending strength and corresponding deflection, which fit well with the experimental results; and the development of a calculation model for the bending toughness index of PVA fiber-reinforced seawater and sea sand cement composites, providing an effective prediction of material bending toughness.

A time window averaging method to mitigate the impact of shell growth trends on Tridacna δ18O records

Tridacna shells have become valuable archives for high-resolution paleoclimate reconstructions due to their daily-to-annual bands. The δ18O, influenced by temperature and salinity, serves as a key geochemical proxy for Tridacna. Traditionally, linear interpolation has been the go-to method for creating evenly spaced Tridacna δ18O timeseries. However, the accuracy of this method can be influenced by the prominent negative shell growth trends. Given that Tridacna shells exhibit significantly faster growth rates during the juvenile stage than in adulthood, constant sampling intervals may lead to overly dense sampling during the juvenile phase, which could potentially introduce errors in the linearly interpolated Tridacna δ18O record. In this study, we proposed a time window averaging method to mitigate the influence of growth trends in Tridacna δ18O records from the northern South China Sea (SCS). The time window averaging method calculates the average of measured Tridacna δ18O data within a time window, whose length is determined by the sampling resolution for each year and the expected temporal resolution. Pseudo-Tridacna experiments, using the newly developed proxy system model for Tridacna δ18O, were conducted to assess the accuracy of both interpolation and averaging methods. Results indicate that the averaging method outperforms the interpolation method, especially in seasonality estimation. The pseudo-Tridacna experiments recommend employing the averaging method for monthly Tridacna δ18O records when sampling density exceeds ∼20 samples/year. Two real Tridacna δ18O records from the northern SCS demonstrate consistency with pseudo-Tridacna experiments, supporting the efficacy of the averaging method in reducing bias in Tridacna δ18O records associated with growth trends. Our results show the potential of the time window averaging method to improve Tridacna-based paleoclimate reconstructions.

Honeycomb porous regenerated cellulose aerogel films with enhanced thermal dissipation for agricultural mulch application

Agricultural films, essential to contemporary agricultural production, are mostly made from non-biodegradable petroleum-based materials. The use of such films, especially in high-temperature environments, contributes to elevated internal temperatures in direct sunlight, adversely affecting crop appearance and quality. In this work, rice straw was used as the raw material to prepare biodegradable chemically crosslinked regenerated cellulose aerogel films (RCAF-CC) by combining physical dissolution regeneration, chemical cross-linking, and freeze-drying. The resulting RCAF-CC is notable for its high middle-infrared emissivity and high solar reflectivity, which significantly aid in thermal dissipation for agricultural mulch by enhancing infrared radiation and solar reflection. Compared to traditional polyethylene films, RCAF-CC, with its superior radiative cooling properties and lower water vapor transport rate, has a significant advantage in the growth trend and survival rate of cherry radishes. It is worth noting that the RCAF-CC achieved the degradation rate of 74.4 % in the 100-day soil burial experiment, and the soybean seeds grown in the degraded soil grew well, showing excellent eco-friendliness. These results show that RCAF-CC can be an alternative source of traditional agricultural films, solving the problems of non-biodegradable and high internal temperatures of the films under direct sunlight.

A Cancer Model Including Tumor Angiogenesis Agents

Vascular tumor growth is a dangerous stage of cancer diseases. The growth of solid tumors beyond the critical size does indeed depend on angiogenesis. The angiogenesis process causes metastasis which leads to tumor migration. In this paper, a cancer model considering the role of tumor angiogenesis agents is developed to highlight better these chemical substances in the trend of vascular tumor growth. The proposed model comprises four variables: endothelial cells, tumor angiogenesis agents, tumor cells, and effector immune cells. This paper investigates the avascular and vascular stages of tumor growth with the chaotic analysis of the model dynamics. The results show that the proposed model with the existence of tumor angiogenesis agents could capture the states of tumor growth and angiogenesis. It is also shown that the tumor-secreted inhibitor factors are necessary to regulate the angiogenesis; however, an increase of inhibitor factors would be effective in the termination of vascularization. DOI: https://doi.org/10.52783/pst.610

National trends in musculoskeletal urgent care centers: Improved Medicaid access from 2019 to 2023.

Musculoskeletal urgent care centers (MUCCs) are an increasingly common alternative to emergency departments for patients with orthopedic injuries. As there is a lack of longitudinal data regarding MUCCs' impact on the emergency health care system, our study seeks to understand recent trends in MUCC growth and their acceptance of Medicaid insurance. Over the last 6 years, at 2-year intervals (2019, 2021, and 2023), we performed a search to identify all MUCCs in the United States. We determined the affiliation and Medicaid acceptance status of all MUCCs, including those that closed/opened between 2019, 2021, and 2023, to analyze trends in MUCC availability and Medicaid acceptance. In 2019, there were 558 MUCCs, which increased to 596 MUCCs in 2021 and then decreased to 555 MUCCs in 2023, representing a growth and then decline of approximately 7%. Overall, since June 2019, 90 MUCCs have opened and 95 MUCCs have closed. Medicaid acceptance increased nationally between 2019 and 2023, from 58% to 71%. Medicaid acceptance increased for both nonaffiliated and privately affiliated MUCCs. Medicaid acceptance has increased nationally from 2019 to 2023, while MUCC availability has gone through a period of growth and then reversion to 2019 levels. As MUCCs have demonstrated limited Medicaid acceptance previously, it is promising that Medicaid acceptance has improved and MUCCs are providing patients with an additional avenue to access orthopedic care.

The relationship between trait anger and reactive aggressive behavior in middle school students: the mediating role and intervention of hostile attribution bias

BackgroundThe reactive aggressive behavior in individuals typically shows a rapid growth trend as individuals enter adolescence, and peaks during middle-school period. According to the Comprehensive Cognitive Model of Trait Anger, trait anger and hostile attribution bias play important roles in the development of reactive aggressive behavior. Based on this, current study explored the relationship between trait anger and reactive aggressive behavior in middle school students, as well as the mediating role of hostile attribution bias and interventions.MethodsThe current study consisted of three sub-studies. Study 1 recruited 87 middle school students with an average age of 12.367 ± 0.889 years, investigated the relationship between trait anger and reactive aggressive behavior, as well as the mediating role of trait hostile attribution bias. Study 2 recruited 62 middle school students with an average age of 13.376 ± 0.963 years, investigated the relationship between trait anger and reactive aggressive behavior, as well as the mediating role of state hostile attribution bias. Study 3 recruited 80 middle school students with an average age of 13.392 ± 0.977 years, implemented an intervention targeting trait hostile attribution bias in middle school students with high trait anger to reduce their reactive aggressive behavior. In current study, data management was performed using SPSS 22.0. Descriptive statistics, independent samples t-test, paired samples t-test, repeated measures analysis of variance (ANOVA), and path analysis were used for statistical analysis.FindingsThe results of Study 1 showed that trait anger predicted reactive aggressive behavior through trait hostile attribution bias. The results of Study 2 indicated that trait and state hostile attribution bias played mediating role intermediary, and trait hostile attribution bias had a stronger mediating effect than state hostile attribution bias. The results of Study 3 suggested that the intervention effectively decreased trait hostile attribution bias and reactive aggressive behavior.ConclusionsTrait anger can predict the reactive aggressive behavior of junior high school students, with trait hostility attribution bias and state hostility attribution bias mediating this relationship. Intervening in the hostility attribution bias of high-anger junior high school students can effectively reduce their reactive aggressive behavior.

Factors Driving Unexpected Drought-Induced Nothofagus dombeyi Mortality in a Valdivian Temperate Rainforest, Argentina

Understanding the drivers of drought-induced tree mortality remains a significant scientific challenge. Here, we investigated an unexpected mortality event of Nothofagus dombeyi (Mirb.) Oerst. following the 2014–15 drought in a Valdivian rainforest, Argentina. Our focus was on long-term growth trend differences between vital and dead trees, and how the mixing of species in tree neighbourhoods drives tree growth during drought. The inter-annual variation of basal area increments of vital and 2014–15-dead N. dombeyi trees showed a similar pattern through the 1930–2015 period, while the climate–growth relationships indicated that precipitation during the growing season promoted growth in both vitality classes, regardless of whether they were in the wettest location. For the period 1990–2015, both vitality classes showed similar estimated growth regardless of competition level, whereas species mingling in the neighbourhood significantly affected the dead tree growth. Network analysis revealed that drought performance covaried positively with a neighbourhood dominated by species functionally different from the focal species only in vital trees. These findings suggest a nuanced response of N. dombeyi to drought, shaped by multifaceted interactions at both the individual tree and neighbourhood levels. This research underscores that species-specific relationships under different mixtures imply different tree responses within a stand, and add complexity to understanding drought response at the individual level.

Effect of Tongue Position on Facial Morphology of Pakistani Adults and Different Growth Patterns.

To determine the effect of tongue position on facial morphology of Pakistani adults and different growth patterns. Cross-sectional study. Place and Duration of the Study:Department of Orthodontics, Karachi Medical and Dental College, Karachi, Pakistan, from January to April 2021. The study included individuals aged 17 to 30 years with no history of prior orthodontic treatment, absence of wound, burn, or scar tissue in the neck region, comfortable breathing through the nose, absence of deglutition disorder, and a skeletal Class I or II relationship. The exclusion criteria were a cleft lip or palate, or a history of chronic mouth breathing, snoring, or tonsillectomy. According to their skeletal relationships, the subjects were split into three groups; Group I (low-angle), Group II (normal growth), and Group III (high-angle). Vertical growth pattern was assessed on radiograph by interpreting the values of NS / ML (nasion-sella / mandibular plane) angle, and angle formed between FH / ML (Frankfort horizontal plane / mandibular plane). A predesigned proforma was used to record all the measurements made on pre-treatment lateral cephalograms by the sole investigator. Data were analysed using SPSS 24.0. Data from the lateral cephalogram of 79 patients, consisting of 18 (22.8%) males and 61 (77.2%) femaleswho met the inclusion criteria, were analysed.The sample included 15 low-angle, 45 normal vertical growth, and 19 high-angle cases. Fifty participants had Class I skeletal relationships, while 29 had Class II relationships. According to the ANOVA test, FH / ML and NS / ML measurements showed no statistically significant variations in tongue position and growth trends. There was no statistically significant difference between tongue position and facial morphology of Class I or II subjects with different vertical growth patterns. However, there was a statistically sufficient evidence showing the tongue height was greater in Class I skeletal relationship patients as compared to Class II skeletal cases (p = 0.008). Tongue position, Tongue space, Tongue length, Growth pattern.

Estimating and forecasting suppressed electricity demand in Ghana under climate change, the informal economy and sector inefficiencies

Suppressed demand arises from inadequate energy access, resulting in unmet basic needs. Therefore, this study investigates the impact of the informal economy, rising temperatures, and electricity transmission losses on suppressed demand in Ghana from 2000 to 2020, using a quantile autoregressive distributed lag (QARDL) approach. The study forecasts suppressed demand using Shared Socioeconomic Pathway (SSP) scenarios, offering insights for energy system planning. The results indicate that all the variables significantly affect suppressed demand in the mid-quantiles. Notably, transmission losses and growth of informal economy variables significantly impact suppressed demand within the 50th to 75th quantiles but have minimal impact before the 50th and after the 75th quantiles in the long run. Additionally, rising temperatures substantially increase suppressed demand by increasing electricity demand for cooling. All future scenarios project this growth trend will continue through 2050, albeit at varying rates. In the business-as-usual (BAU) case, suppressed demand is expected to steadily increase from 1782 MW in 2020 to 8636 MW in 2050. This trajectory aligns well with historical growth trends, which saw suppressed demand increase from 659 GWh to 1782 GWh between 2000 and 2020. SSP scenarios suggest that suppressed demand could grow substantially through 2050, driven by high losses and informal sector growth. Despite sustainable development narratives like SSP1, suppressed demand remains high without major grid and governance improvements. Comparing the results with past studies shows that our findings align with previous research but provide more nuanced insights by incorporating the effects of the informal economy and using advanced forecasting techniques. Practical policy implications include investing in green infrastructure, upgrading grid infrastructure, and formalising the informal economy to alleviate suppressed demand. These actions are critical for sustainable energy access and meeting future electricity needs effectively.

Long-Term Volumetric Evaluation of Stent-Assisted Balloon-Induced Intimal Disruption and Relamination of Aortic Dissection (STABILISE) in Acute Type B Aortic Dissection

ObjectiveTo quantify the volumetric aortic remodeling of patients with acute type B aortic dissection (ATBAD) treated with the stent-assisted balloon-induced intimal disruption and relamination (STABILISE) technique. MethodsAll patients with ATBAD operated with the STABILISE technique between 2014 and 2017 with pre-operative (PreOp), post-operative (PostOp) and >12 months (follow-up) computed tomography scans were included in this study. True lumen and total aortic volume were accurately assessed in the thoracic and abdominal portions with a semi-automatic 3D tool. Associations with long-term adverse events were estimated. ResultsSeventeen patients were measured at PreOp, PostOp and a mean follow-up of 19±8 months. The false lumen to total volume ratio decreased on average from 63% to 18% after STABILISE (p<0.001) and remained around 12% at follow-up. These remodeling was more pronounced in the thoracic aorta (7%) than in the abdominal aorta (28%). The trend in aortic size growth was stronger for volumes than for maximum areas or diameters (p<0.001, p<0.05 and p<0.05, respectively). Adverse events were identified in 4 patients during a long-term follow-up of 76±18 months. The only aortic size variable assessed preoperatively that was associated with undesirable events was the total volume of the abdominal aorta (p<0.05). ConclusionsA volumetric analysis of dissected aortic size after the STABILISE procedure allowed accurate quantification of mid-term aortic remodeling and helped to identify the abdominal aortic volume as a preoperative variable associated with undesirable long-term events.