Growth Temperature Research Articles

Optimal operating conditions for the rapid growth of KH2PO4 crystal by numerical simulation

Numerical simulations of the turbulent hydrodynamics and concentration in the rapid growth of potassium dihydrogen phosphate (KH2PO4 or KDP) crystals have been performed. In this work, a quadratic power-law growth model is applied, concerning the mass transfer occurring at the crystal surface during the growth process under low supersaturations. The mass transfer boundary condition is discretized by using the Over-Relaxed approach. The effects of the growth temperature and rotation rate on surface supersaturation distribution and the diffusion layer are investigated, which are critically involved in the processes of surface morphological instability and inclusion formation. Due to the kinetic limitation, the response of different types of crystal surfaces to temperature varies, with a pyramidal surface about twice as high as a prismatic face. In addition, the contour map of the growth rate combined with the coefficient of variation (C.V) for various temperatures and rotation rates is used. Uniformity of surface supersaturation is provided by lowering the growth temperature and increasing the rotation rate. Furthermore, the criteria of crystal growth strategies are proposed to optimize the process parameters and obtain favorable conditions for crystal growth, thereby facilitating defect-free and high-quality crystal formation at an appropriate growth rate.

Magnetic and optical properties of ZnO nanoparticles and nanorods synthesized by green chemistry

ZnO nanostructures have attracted considerable attention because of their physicochemical properties and applications as antibacterial agents, photocatalytic reactions for pollutant removal, and electronics. Hence, efficient production and knowledge of their properties under different synthesis conditions are essential. Biosynthesis has emerged as an excellent growth-directing method for synthesizing nanomaterials, representing a soft and cleaner alternative for their production. In this study, we synthesized different ZnO nanostructures using a soft chemistry method at different growth temperatures, from 200 to 800 °C every 200 °C. The crystalline structure was estudied by x-ray Diffraction (XRD) and High-Resolution Transmission Electron Microscopy (HRTEM). The shape and size were studied by Field Emission Scanning Electron Microscopy (FESEM) and Transmission Electron Microscopy (TEM), which revealed a ZnO hexagonal phase with two shapes: nanoparticles (NPs) with irregular shapes and nanorods of different sizes. The optical properties were studied by Raman and UV-visible spectroscopy, and optical absorption measurements showed bandgap tuning of the produced nanostructures. Finally, the magnetic characteristics of the samples demonstrated magnetic anisotropy due to the preference for crystalline formation and the size of the nanoparticles. The magnetic interaction between the two types of NPs increased the diamagnetism associated with the nanorods.

Growth of boron-doped diamond-like carbon films from a low-pressure high-density plasma in inductively coupled chemical vapour deposition

The main objective of this work was the preparation and optimization of boron-doped diamond-like carbon (DLC) films having a good crystalline structure, and electronic and optical properties, at an extremely low deposition pressure and relatively low growth temperature, by varying the flow rates of precursor gases (CH4, B2H6, and Ar) in the plasma controlled at 800 W of RF power. Planar inductively coupled plasma-enhanced chemical vapour deposition technique was used to enable deposition at ∼5.33 Pa and 450 °C, at a constant negative substrate bias of -40 V. The flow rate of the dopant gas (B2H6) was changed to obtain a set of samples, while the precursor gas (CH4) flow rate was kept fixed. The doped sample, prepared with B2H6/CH4 ratio (r) = 1 %, was found to possess a maximum ID/IG (intensity ratio of the D peak with the G peak) of ∼0.819 and a minimum IDia/IG ratio (relative intensity of the Diamond peak to the G peak) of ∼1.149. A high sp3 content of ∼50 % was revealed from the X-ray photoelectron spectroscopy analysis and the transmission electron microscopy images also indicated the presence of prominent 〈111〉, 〈220〉, and 〈311〉 crystallographic planes. The B-doped DLC film possessed enhanced electrical conductivity (σRT) of ∼3.02 ×10−5 S cm−1 relative to the intrinsic DLC films, a corresponding minimum of activation energy (ΔEH) (as calculated in the above room-temperature regime) of ∼170 meV, an optical band gap (Eg) of ∼3.35 eV, and the root mean square roughness of ∼48.12 nm.

Promotion of Processability in a p-Type Thin-Film Transistor Using a Se-Te Alloying Channel Layer.

p-type thin-film transistors (pTFTs) have proven to be a significant impediment to advancing electronics beyond traditional Si-based technology. A recent study suggests that a thin and highly crystalline Te layer shows promise as a channel for high-performance pTFTs. However, achieving this still requires specific conditions, such as a cryogenic growth temperature and an extremely thin channel thickness on the order of a few nanometers. These conditions critically limit the practical feasibility of the fabrication process. Here, we report a high-performance pTFT incorporating a 60-nm-thick highly crystalline Se-Te alloyed channel layer, produced using pulsed laser ablation at room temperature. The Se0.5Te0.5 alloy system enhances crystalline temperature and widens the band gap compared to a pure Te channel. Consequently, this approach results in a field-effect mobility of 3 cm2/V·s, with an on/off current ratio of 3 × 105, a subthreshold slope of 2.1 V/decade, and a turn-on voltage of 6.5 V, achieved through conventional annealing at 250 °C. To demonstrate its applicability in complementary circuit applications, we integrate a complementary-type inverter using a p-type Se0.5Te0.5 TFT and an n-type Al-doped InZnSnO, demonstrating a high voltage gain of 12 and a low static power consumption of 17 nW. This suggests that the Se-Te alloyed channel approach paves the way to a more straightforward and cost-effective process for Te-based pTFT devices and their applications.

Nitrogen Doping in VO2 Thin Films on Synthetic Mica Substrates Through Mist Chemical Vapor Deposition: Lowering the Metal–Insulator Transition Temperature Toward Smart Windows

AbstractIn this study, nitrogen (N) is doped into VO2 thin films through mist chemical vapor deposition (CVD), and the effect of the doping on metal–insulator transition (MIT) temperatures is investigated. The N‐doped VO2 thin films are grown on an SnO2 buffer layer. The N‐doped VO2 lattice spacing tends to expand as the growth temperature decreased, which indicates that the incorporation of N into the lattice is derived from the Ethylenediamine. Secondary ion mass spectrometry (SIMS) is conducted to investigate the relationship between the decrease in the transition temperature and N concentration. The results reveal that the sample grown at 425 °C contains approximately 2 × 1020 cm−3 of N. Thus, efficient nitrogen doping can be achieved through mist CVD. The temperature‐resistance characteristics of VO2 thin films are measured to investigate their electrical properties and MIT temperatures. The results reveal that for undoped samples, the transition temperature slightly decreases with the decrease in the growth temperature. Furthermore, the sample grown at 425 °C exhibits a considerable change in resistance because of MIT at approximately 29.5 °C. These results prove the potential of using mist CVD N‐doped thin films for smart window applications to address future energy problems.

Effects of atrazine on movement, metabolism and gene expression in Pelophylax nigromaculatus larvae under global warming

Global warming and environmental pollutants both pose a threat to the behavior and physiology of animals, but research on the combined effects of the two is limited. Atrazine, a widely used herbicide, has toxic effects on organisms. In this study, the effects of environmental concentrations of atrazine exposure (100 μg/L) for seven days on the movement, metabolism and gene expression related to motility of Pelophylax nigromaculatus larvae (GS8) were investigated under global warming. The results showed that compared to the optimal growth temperature (18 °C), atrazine treatment under global warming (21 °C) significantly increased the average speed (about 11.2 times) and maximum acceleration (about 1.98 times) of P. nigromaculatus larvae, altered the relative abundance of 539 metabolites, including Formyl-5-hydroxykynurenamine, 2,4-Dihydroxybenzophenone, and FAPy-adenine, and changed the nucleotide metabolism, pyrimidine metabolism, glycerophospholipid metabolism, and purine metabolism, as well as increased the gene expression of SPLA2 (about 6.46 times) and CHK (about 3.25 times). In summary, atrazine treatment under global warming caused metabolic disorders in amphibian larvae and increased the expression of some movement-related genes in the brain, resulting in abnormally active.

Rapid construction of nickel phyllosilicate with ultrathin layers and high performance for CO2 methanation

The traditional techniques for the synthesis of nickel phyllosilicates usually time-consuming and energy-intensive, which often lead to the formation of layers with excessive thickness due to uncontrolled crystal growth. In order to overcome these challenges, this work introduces a microwave-assisted synthesis strategy to facilitate the synthesis of Ni-phyllosilicate-based catalysts within an exceptionally short duration of only five minutes, attaining a peak temperature of merely 102 °C. To enhance the specific surface area and to increase the exposure of active sites, an investigation was conducted involving three surfactants. The employment of hexadecyl trimethyl ammonium bromide (CTAB) has yielded remarkable results, with an ultrahigh specific surface area reaching 535 m2 g−1 and an ultrathin lamellar thickness of 1.43 nm. The catalyst exhibited an impressive CO2 conversion of 81.7 % at 400 °C, 60 L g−1 h−1, 0.1 MPa. It also demonstrated a substantial turnover frequency for CO2 (TOFCO2) of 5.4 ± 0.1 × 10−2 s−1, alongside a relatively low activation energy (Ea) of 80.74 kJ·mol−1. Moreover, the catalyst maintained its high stability over a period of 100 h and displayed high resistance to sintering. To further elucidate growth temperature gradient of the catalyst and concentration gradient of the materials involved, COMSOL Multiphysics (COMSOL) simulations were effectively utilized. In conclusion, this work breaks the limitation associated with traditional, laborious synthesis methods for Ni-phyllosilicates, which can produce materials with high surface area and thin-layer characteristics.

Effects of growth temperature on phase transformation and crystal quality of Ga2O3 films grown on Si/AlN composite substrates by MOCVD

High-quality ε-phase Ga2O3 thin film with a FWHM of 0.68° for the (002) plane in omega scan is grown on Si/AlN composite substrate by MOCVD. The crystal phase evolution and microstructure of Ga2O3 thin films at different temperatures are studied systematically. It is found that Ga2O3 changes from amorphous at 400 °C to ε-phase at 500 °C. As the temperature further rises to 600 °C, it eventually transforms into β-phase. Due to the difference of lattice mismatch, ε-Ga2O3 is crystalline with high crystallinity on the surface of the film, but amorphous at the interface, while β-Ga2O3 is polycrystalline. In addition, ε-Ga2O3 thin films not only have the smoothest surface with roughness of 2.63 nm, but also the content of point defects (such as oxygen vacancies) is significantly reduced compared with that of amorphous and β-Ga2O3 thin films. This work provides important references for the hetero-integration of Si and Ga2O3 by MOCVD, and is beneficial for the development of low cost and high crystal quality Ga2O3 thin films which are suitable for high voltage and ultraviolet optoelectronics.

Understanding winter windstorm predictability over Europe

Abstract. Winter windstorms belong to the most damaging meteorological events in the extra-tropics. Their impact on society makes it essential to understand and improve seasonal forecasts of these extreme events. Skilful predictions on a seasonal timescale have been shown in previous studies by investigating hindcasts from various forecast centres. This study aims to explain storm forecast skill based on relevant dynamical factors. Therefore, a number of factors which are known to influence either windstorms directly or their synoptic relevant systems, mid-latitude cyclones, are investigated. These factors are analysed for their relation to windstorm forecast performance based on a reanalysis (ERA5) and the seasonal hindcast of the UK Met Office (Global Seasonal forecasting system version 5, GloSea5). Within GloSea5, relevant dynamical factors are (1) validated with respect to their physical connections to windstorms, (2) investigated with respect to the seasonal forecast skill of the factors themselves, and (3) assessed on the relevance and influence of their forecast performance to and on windstorm forecast skill. Although not all investigated factors reveal a clear and consistent influence on windstorm forecast skill over Europe, core factors like mean sea level pressure gradient, sea surface temperature, equivalent potential temperature and Eady growth rate show consistent results within these three steps: their physical connection is well represented in the model; these factors are skilfully predicted in storm-relevant regions, and, consequently, this skill leads to increased forecast skill of winter windstorms over Europe. This study thus explains existing forecast skill in winter windstorms but also indicates potential for further model developments to improve seasonal winter windstorm predictions.

Examination of the Bactericidal and Fungicidal Activity of Bacillus amyloliquefaciens M Isolated from Spring Waters in Bulgaria

In order for a strain to be considered a probiotic or suitable plant bioprotective agent, it must have proven antimicrobial activity against pathogenic bacteria and phytopathogenic fungi. Bacillus amyloliquefaciens M exhibited significantly high antifungal activity against pathogenic fungi of the genera Aspergillus, Penicillium, Fusarium, and Sclerotinia; yeasts of the genera Candida and Saccharomyces; as well as high antibacterial activity against pathogens of the genera Escherichia, Salmonella, Staphylococcus, Listeria, Pseudomonas, and Bacillus. The manifested antimicrobial activity was influenced by the composition of the growth medium. The antifungal activity of the strain was investigated at growth temperatures of 30 °C and 37 °C, and at different pH values in aerobic and anaerobic cultivation, under static and dynamic culturing conditions. High antifungal activity was observed at the 24th h on both growth media (LBG broth and MPB broth) at pH = 6 and pH = 7 in aerobic and anaerobic cultivation. Bacillus amyloliquefaciens M produced antibiotic substances at pH > 5.0, and the antibiotic substances were either secreted into the medium or associated with the cell surface. Four compounds with different antifungal activity and different Rf values were registered through thin-layer chromatography (Rf1 = 0.47; Rf2 = 0.55; Rf3 = 0.67; and Rf4 = 0.75), two of the compounds were ninhydrin-positive. Bacillus amyloliquefaciens M was cultured in a bioreactor with stirring, and the parameters of the growth kinetics and the sporulation kinetics have been modeled. A spore concentrate of Bacillus amyloliquefaciens M has been obtained. In further research, the efficiency of the concentrate as a plant bioactive agent will be tested.

Growth Temperature Effects in Nanoscale-Thick GaTe Films on c-Sapphire Substrate by Molecular Beam Epitaxy: Implications for High-Performance Optoelectronic Devices

Growth Temperature Effects in Nanoscale-Thick GaTe Films on c-Sapphire Substrate by Molecular Beam Epitaxy: Implications for High-Performance Optoelectronic Devices

Isolation and characterization of Bacillus cereus virulent phage CA1

Infection of Bacillus cereus can lead to massive mortality of Chinese soft- shelled turtles (Pelodiscus sinensis). Phage has shown promising effects in the treatment of bacterial infections. A virulent phage CA1 was obtained from pond water of a P. sinensis aquaculture farm. The characteristics of CA1 and its protective effect on P. sinensis were analyzed, and whole genome were sequenced. The phage CA1, with a long tail and a hexagonal head could specifically lyse B. cereus. The CA1 latent phase was 40 min, and the rise phase was 40–160 min. The optimal growth temperature for CA1 was 45 °C, the optimal pH was 7.0, and the multiplicity of infection (MOI) was 0.1. Its whole genome was 45,902 bp linear double-stranded DNA molecule with an average GC of 38.30%, and contained 74 predicted open reading frames. After infection of P. sinensis with B. cereus (1.0 × 107 CFU/g), the protection rate was 54% at the phage MOI of 0.1. The above findings demonstrate that CA1 exhibits typical traits of phage-based disinfectants, suggesting its potential application in the prevention and management of B. cereus contamination within aquaculture environments.

The fabrication of ultra-wide bandgap GeO2 thin films by DC magnetron sputtering: The impacts of growth temperature and post-annealing process

Ultra-wide bandgap semiconductors (UWBSs), possessing the bandgap greater than 4 eV, have emerged as an advanced platform for optoelectronic device applications. The exploration of novel UWBSs becomes compelling research focus on the solar blind photodetectors (SBPDs). Here, we have deposited ultra-wide bandgap GeO2 films on c-plane sapphire substrates using direct-current (DC) magnetron sputtering method and investigated the effects of the growth and annealing temperatures on surface morphologies, crystal structure, oxygen vacancies, and bandgap energies of GeO2 films. The high quality GeO2 film with the hexagonal phase can be obtained at the growth temperature of 500 °C, which transforms to the mixture of hexagonal and tetragonal phases after annealing at 900 °C. By analyzing the energy loss spectra of O 1s peaks, GeO2 films exhibit the ultra-wide bandgap ranging from 5.78 to 5.90 eV, which is verified by optical transmittance measurements. Moreover, 200 nm SBPDs based on GeO2 films have been fabricated and an obvious improvement in the photoresponse current of the annealed device has been found due to the induced additional electrons by the hole capture of oxygen vacancies. Our findings on the development of ultra-wide bandgap GeO2 films pave a way towards the realization of robust and high-performance SBPDs.

Investigating the bacterial sustainable self-healing capabilities of cracks in structural concrete at different temperatures

Structural cracks are the major cause of structural failure and significantly impact their strength and durability. Bacterial self-healing concrete as a sustainable structural Smart material offers potential advantages by autonomously repairing cracks, reducing repair costs, and eliminating human intervention. Most self-healing concrete bacteria have optimal growth temperatures around 25–37°C. Their metabolic activity can decline at higher temperatures, potentially affecting their ability to produce calcium carbonate and heal cracks. This study aimed to investigate the effectiveness of heat-resistant bacteria strains in self-healing concrete under high temperatures. The study examined the impact of temperature, bacteria type, and content on self-healing concrete properties at four different temperatures: room temperature, 60°C, 120°C, and 200°C. Several tests were performed to test the effectiveness of the bacteria strains, including compressive strength tests, scanning electron microscopy (SEM), energy-dispersive spectroscopy (EDS), and X-ray diffraction (XRD). This study showed significant improvement in the mechanical strength of the concrete, particularly at 60°C by 91.2% for compressive strength and 95.95% for indirect tensile strength. The SEM and EDS tests also revealed the presence of calcium carbonate, which suggests that the bacteria were actively involved in the self-healing process. However, as the temperature increased to 200°C, there was a noticeable decrease in strength compared to 60°C, but the compressive strength at room temperature remained higher, indicating that heat-resistant strains of bacteria may not be effective at higher temperatures.

Biological characterization of emerging fungal pathogen Colletotrichum associated with mango (Mangifera indica L.) post-harvest anthracnose from Vietnam.

Post-harvest anthracnose (PHA) of mango is a devastating disease, which results in huge loss to mango producers and importers. Various species of PHA, diverse pathogenicity, and different resistance towards fungicides make it essential to evaluate the pathogen taxonomic status and biological characterization. Two strains DM-1 and DM-2 isolated from the fruit of DaQing mango from Vietnam were identified as Colletotrichum fructicola and C. asianum respectively, based on the morphological features, along with the phylogenetic tree of ITS and ApMat combined sequences. The growth status of different Colletotrichum strains under different conditions was analyzed to reveal the biological characteristics. The optimum growth temperature of DM-1 and DM-2 was 28°C and mycelia grew rapidly in the dark. Both strains could grow in media with pH 4-11, while the optimum pH value was 6. Maltose and soluble starch were the most suitable carbon source for DM-1 and DM-2 respectively, and the peptone was the most suitable nitrogen source for both strains. The lethal temperatures were recorded as 55°C 5min for DM-1, and 50°C 10min for DM-2. To the best of our knowledge, it is the first study reporting the identification of the pathogens: C. fructicola and C. asianum responsible for postharvest fruit anthracnose of mango in Vietnam.

A Proximity Complementation Assay to Identify Small Molecules That Enhance the Traffic of ABCA4 Misfolding Variants.

ABCA4-related retinopathy is the most common inherited Mendelian eye disorder worldwide, caused by biallelic variants in the ATP-binding cassette transporter ABCA4. To date, over 2200 ABCA4 variants have been identified, including missense, nonsense, indels, splice site and deep intronic defects. Notably, more than 60% are missense variants that can lead to protein misfolding, mistrafficking and degradation. Currently no approved therapies target ABCA4. In this study, we demonstrate that ABCA4 misfolding variants are temperature-sensitive and reduced temperature growth (30 °C) improves their traffic to the plasma membrane, suggesting the folding of these variants could be rescuable. Consequently, an in vitro platform was developed for the rapid and robust detection of ABCA4 traffic to the plasma membrane in transiently transfected cells. The system was used to assess selected candidate small molecules that were reported to improve the folding or traffic of other ABC transporters. Two candidates, 4-PBA and AICAR, were identified and validated for their ability to enhance both wild-type ABCA4 and variant trafficking to the cell surface in cell culture. We envision that this platform could serve as a primary screen for more sophisticated in vitro testing, enabling the discovery of breakthrough agents to rescue ABCA4 protein defects and mitigate ABCA4-related retinopathy.

Modern Floating Greenhouses: Planting Gray Oyster Mushrooms with Advanced Management Technology Including Mobile Phone Algorithms and Arduino Remote Control

A floating greenhouse for growing oyster mushrooms can be operated remotely via a mobile phone. This innovative system can enhance mushroom production and quality while saving time. By using the Android OS operating system on a mobile phone (Internet Mobile Device with Android OS, MGT Model: T10), users can adjust the humidity and temperature within the greenhouse. This approach is particularly beneficial for older adults. Create a smart floating greenhouse that can be controlled remotely to cultivate oyster mushrooms. It would help to enhance the quality of the mushrooms, reduce the time required for cultivation, and increase the yield per planting area. We carefully examined the specifications and proceeded to create a greenhouse that could float. In addition, we have developed a unit that could control temperature and humidity, a solar cell unit, and a rack for growing mushrooms. Our greenhouses were operated remotely. To determine the best conditions for growing plants in a floating greenhouse, we conducted a test to measure temperature and humidity. We then compared our findings to those of a traditional greenhouse test and determined the optimal parameters for floating greenhouse growth. These parameters include growth time, temperature, humidity, and weight. A mushroom nursery that can be controlled remotely and floats on water consists of four main components: a structure to regulate temperature and humidity, solar cells, and mushroom racks. Research shows that mushrooms grown under this automated control system grow better than those grown through traditional methods. The harvest period is shorter, and the yield is higher than the typical yield of 1.81–1.22. When considering the construction and use of remote-controlled floating mushroom nurseries, the daily weight of mushrooms accounted for 20.22%. The company’s investment return rates were found to be 3.47 years, or 580.21 h per year, which is higher than the yield of traditional methods. This mobile phone remote control system, created by Arduino, is tailor-made for cutting-edge floating greenhouses that grow grey oyster mushrooms. It can be operated with ease via mobile devices and is especially user-friendly for elderly individuals. This system enables farmers to produce a high volume of quality breeds. Furthermore, those with fish ponds can utilize the system to increase their profits.

The Influence Mechanism of Quantum Well Growth and Annealing Temperature on In Migration and Stress Modulation Behavior.

This study explores the effects of growth temperature of InGaN/GaN quantum well (QW) layers on indium migration, structural quality, and luminescence properties. It is found that within a specific range, the growth temperature can control the efficiency of In incorporation into QWs and strain energy accumulated in the QW structure, modulating the luminescence efficiency. Temperature-dependent photoluminescence (TDPL) measurements revealed a more pronounced localized state effect in QW samples grown at higher temperatures. Moreover, a too high annealing temperature will enhance indium migration, leading to an increased density of non-radiative recombination centers and a more pronounced quantum-confined Stark effect (QCSE), thereby reducing luminescence intensity. These findings highlight the critical role of thermal management in optimizing the performance of InGaN/GaN MQWs in LEDs and other photoelectronic devices.

Low-Temperature Synthesis of WSe2 by the Selenization Process under Ultrahigh Vacuum for BEOL Compatible Reconfigurable Neurons.

Low-temperature large-area growth of two-dimensional (2D) transition-metal dichalcogenides (TMDs) is critical for their integration with silicon chips. Especially, if the growth temperatures can be lowered below the back-end-of-line (BEOL) processing temperatures, the Si transistors can interface with 2D devices (in the back end) to enable high-density heterogeneous circuits. Such configurations are particularly useful for neuromorphic computing applications where a dense network of neurons interacts to compute the output. In this work, we present low-temperature synthesis (400 °C) of 2D tungsten diselenide (WSe2) via the selenization of the W film under ultrahigh vacuum (UHV) conditions. This simple yet effective process yields large-area, homogeneous films of 2D TMDs, as confirmed by several characterization techniques, including reflection high-energy electron diffraction, atomic force microscopy, transmission electron microscopy, and different spectroscopy methods. Memristors fabricated using the grown WSe2 film are leveraged to realize a novel compact neuron circuit that can be reconfigured to enable homeostasis.

Thermotolerance of environmental fungi captured from indoor air.

While more than six million species make up the fungal kingdom, less than 300 cause disease in humans, in part because many fungal species are unable to grow at temperatures at or above human body temperature. However, there is concern that as global temperatures increase, fungal species that do not currently pose a risk to human health may adapt to growth at higher temperatures, opening the door for the emergence of new human fungal pathogens. This study assessed the growth of five fungal isolates captured from indoor air at temperatures up to 38°C. All five isolates grew well at 24-27°C, grew poorly or not at all at 36°C, and none grew at 38°C. We then investigated the growth of three fungal isolates captured from indoor air at 36 - 39°C when the growth temperature was gradually increased from ambient room temperature to 36 - 39°C, compared to growth after a sudden change of temperature from room temperature to 36 - 39°C. All three isolates still exhibit poor to no growth at 39°C. This research was supported by a NASA-WVSGC Undergraduate Research Fellowship (AEC) and a NASA-WVSGC Research Enhancement Award (LSR).