Growth Of Covalent Organic Frameworks Research Articles

Self-Controlled Growth of Covalent Organic Frameworks by Repolymerization

The growth of covalent organic frameworks (COFs) normally goes through a fast polymerization process, which quickly forms amorphous powder and then slowly crystallizes to obtain nanometer-sized cry...

Facile Removal of Phytochromes and Efficient Recovery of Pesticides Using Heteropore Covalent Organic Framework-Based Magnetic Nanospheres and Electrospun Films.

Nontargeted analysis of food safety requires selective removal of interference matrices and highly efficient recovery of chemical hazards. Porous materials such as covalent organic frameworks (COFs) show great promise in selective adsorption of matrix molecules via size selectivity. Considering the complexity of interference matrices, we prepared crystalline heteropore COFs whose two kinds of pores have comparable sizes to those of several common phytochromes, main interference matrices in vegetable sample analysis. By controlling the growth of COFs on the surface of Fe3O4 nanoparticles or by utilizing a facile co-electrospinning method, heteropore COF-based magnetic nanospheres or electrospun nanofiber films were prepared, respectively. Both the nanospheres and the films maintain the dual-pore structures of COFs and show good stability and excellent reusability. Via simple magnetic separation or immersion operation, respectively, they were successfully used for the complete removal of phytochromes and highly efficient recovery of 15 pesticides from the extracts of four vegetable samples, and the recoveries are in the range of 83.10-114.00 and 60.52-107.35%, respectively. Film-based immersion operation gives better sample pretreatment performance than the film-based filtration one. This work highlights the great application potentials of heteropore COFs in sample pretreatment for nontargeted analysis, thus opening up a new way to achieve high-performance sample preparation in many fields such as food safety analysis, environment monitoring, and so on.

Secondary growth of covalent organic frameworks (COFs) on porous substrates for fast desalination

Covalent organic frameworks (COFs) has emerged as a highly promising platform material for the manufacturing of molecule-separating membranes. However, COF membranes are predominantly used in the separation of dyes from water or organic solvents and there are very few reports on COF-enabled membranes for desalination. In this work, the secondary growth approach based on unidirectional diffusion synthesis is developed to grow continuous thin films of a COF with an intrinsic pore size of 0.8 nm on macroporous substrates to prepare COF membranes for desalination. The amino-modified polymer microfiltration substrate is fixed in a diffusion cell to separate the oil phase containing the aldehyde precursor (1,3,5-triformylphloroglucinol, Tp) and the aqueous phase containing both the amino precursor (hydrazine, Hz) and the catalyst. Because of the immiscible bi-phase solutions and the high molar ratio of Hz to Tp, the unidirectional diffusion of Hz molecules in the pore channel of the substrate is achieved and the polycondensation between the two precursors occurs at the phase interface. The unidirectional diffusion synthesis is sequentially performed for two times and the secondary growth is essential to ensure the formation of a defect-free, continuous thin film of COF (TpHz) on the top surface of the substrate. Cladding COF coatings are also formed along the skeleton in the near-surface region of the substrate. Such an asymmetric structure ensures both a good permselectivity and a strong adhesion between the grown COF layers and the substrates. The continuous COF thin film grown on the substrates serves as the selective layer, and the COF membrane prepared under the optimized condition exhibits an appreciable Na2SO4 rejection of 58.3% and a water permeance of 40.5 L∙m−2∙h−1∙MPa−1 which are ~ ten times higher than other membranes with similar rejections. This study not only demonstrates the potential of COFs in desalination but also showcases an efficient strategy to grow continuous thin films of COFs on porous substrates which are desired in diverse applications.

Application of GO/COF as a novel, efficient and recoverable catalyst in the Knoevenagel reaction

AbstractHybrid composite based on graphene oxide (GO) and covalent organic framework (COF) [GO/COF] was developed via a simple solvothermal method, at which GO was applied as a platform to load COF based on melamine and terephthaldehyde. The synthesized hybrid nanocomposite was characterized by FT‐IR, XRD, EDX and SEM techniques. Morphological analyses carried out by SEM confirm the successful growth of COF over GO. Then, the resultant composite was employed as an amazing and cost‐effective catalyst in the condensation of several aldehydes with malononitrile and produced the corresponding coupling products in high yields (up to 84%) at room temperature under solvent‐free conditions with an amount of catalyst, 15 mg in a very short reaction time of 10 min. The catalyst could be reused without a noteworthy drop in catalytic activity at least eight times. The use of GO/COF catalyst outcomes under mild reaction conditions in very short reaction time, exceptional catalytic activity, high recyclability and an easy work‐up process for the Knoevenagel condensation.

In situ growth of covalent organic framework on titanium fiber for headspace solid-phase microextraction of 11 phthalate esters in vegetables

Vegetables are easily contaminated by phthalate esters (PAEs) from the environment, agricultural films and fertilizers, affecting human health. In this paper, titanium dioxide (TiO2) nanotube arrays were prepared by electrochemical anodic oxidation on the surface of titanium wire. Covalent organic framework of TpBD was in situ bonded to the titanium wire via TiO2 nanotube arrays using monomers of 1,3,5-trimethylphloroglucinol (Tp) and benzidine (BD). The fabricated TpBD-TiO2 coated titanium wire was used as the solid-phase microextraction fiber to extract 11 PAEs in vegetable samples. Coupled with gas chromatography-tandem mass spectrometry (GC–MS/MS), the limits of detection for PAEs were from 0.001 (di-n-butyl phthalate) to 0.430 (butyl benzyl phthalate) μg/L (S/N = 3) and enrichment factors were between 226 (dimethyl phthalate) and 2154 (di-n-butyl phthalate). Our fabricated TpBD-TiO2 fiber can be used at least 150 times without significant loss of extraction efficiency (<4.8%). Quantitative determination of PAEs in vegetable samples (tomato, lettuce, cucumber) was achieved by standard addition.

Recyclable magnetic covalent organic framework for the extraction of marine biotoxins.

A novel procedure for the preparation of magnetic covalent organic frameworks (COFs) is reported. In situ functionalization of Fe3O4 with dopamine rapidly afforded amino-functionalized magnetic nanoparticles, which after decoration with a COF building block and subsequent COF growth gave access to magnetic composite mTpBD-Me2. The optimized synthesis conditions yielded crystalline and superparamagnetic material with no loss in surface area as compared to bulk COF. The composite material was employed for the first time in magnetic solid-phase extraction of marine biotoxins from seawater with high efficiency, where calculated maximum adsorption capacities of 812 mg g-1 and 830 mg g-1 were found for okadaic acid (OA) and dinophysistoxin-1 (DTX-1), respectively, corresponding to an increase of ∼500-fold for OA and ∼300-fold for DTX-1 as compared to the commonly used non-magnetic macroporous resins. Nearly quantitative desorption efficiency of both biotoxins was obtained using 2-propanol as solvent, rendering the composite materials recyclable with merely minor losses in adsorption capacity after five consecutive cycles of adsorption/desorption. In addition, retention of crystallinity after the adsorption cycles highlights the stability of the composite in seawater. These results illustrate the great efficiency of the novel material in biotoxin adsorption and show great promise for its application in environmental monitoring programs.

Covalent Organic Frameworks: Chemistry beyond the Structure.

Covalent organic frameworks (COFs) represent a new field of rapidly growing chemical research that takes direct inspiration from diverse covalent bonds existing between atoms. The success of linking atoms in two and three dimensions to construct extended framework structures moved the chemistry of COFs beyond the structures to methodologies, highlighting the possibility of prospective applications. Although structure to property relation in COFs has led to fascinating properties, chemical stability, processability and scalability were some of the important challenges that needed to be overcome for their successful implementation. In this Perspective, we take a closer look at the growth of COFs from mere supramolecular structures to potential industrializable materials.

Nucleation and Growth of Covalent Organic Frameworks from Solution: The Example of COF-5.

The preparation of two-dimensional covalent organic frameworks (2D COFs) with large crystalline domains and controlled morphology is necessary for realizing the full potential of their atomically precise structures and uniform, tailorable porosity. Currently 2D COF syntheses are developed empirically, and most materials are isolated as insoluble and unprocessable powders with typical crystalline domain sizes smaller than 50 nm. Little is known about their nucleation and growth processes, which involve a combination of covalent bond formation, degenerate bond exchange, and noncovalent stacking processes. A deeper understanding of the chemical processes that lead to COF polymerization and crystallization is key to achieving improved materials quality and control. Here, we report a kinetic Monte Carlo (KMC) model that describes the formation of a prototypical boronate-ester linked 2D COF known as COF-5 from its 2,3,6,7,10,11-hexahydroxytriphenylene and 1,4-phenylene bis(boronic acid) monomers in solution. The key rate parameters for the KMC model were derived from experimental measurements when possible and complemented with reaction pathway analyses, molecular dynamics simulations, and binding free-energy calculations. The essential features of experimentally measured COF-5 growth kinetics are reproduced well by the KMC simulations. In particular, the simulations successfully captured a nucleation process followed by a subsequent growth process. The nucleating species are found to be relatively small, multilayer structures that form through multiple pathways. During the growth of COF-5, extensions in the lateral (in-plane) and vertical (stacking) directions are both seen to be linear with respect to time and are dominated by monomer addition and oligomer association, respectively. Finally, we show that the experimental observations of increased average crystallite size with the addition of water are modeled accurately by the simulations. These results will inform the rational development of 2D COF polymerizations by controlling the rate of nucleation, thereby increasing their materials quality.

Colloidal Covalent Organic Frameworks.

Covalent organic frameworks (COFs) are two- or three-dimensional (2D or 3D) polymer networks with designed topology and chemical functionality, permanent porosity, and high surface areas. These features are potentially useful for a broad range of applications, including catalysis, optoelectronics, and energy storage devices. But current COF syntheses offer poor control over the material’s morphology and final form, generally providing insoluble and unprocessable microcrystalline powder aggregates. COF polymerizations are often performed under conditions in which the monomers are only partially soluble in the reaction solvent, and this heterogeneity has hindered understanding of their polymerization or crystallization processes. Here we report homogeneous polymerization conditions for boronate ester-linked, 2D COFs that inhibit crystallite precipitation, resulting in stable colloidal suspensions of 2D COF nanoparticles. The hexagonal, layered structures of the colloids are confirmed by small-angle and wide-angle X-ray scattering, and kinetic characterization provides insight into the growth process. The colloid size is modulated by solvent conditions, and the technique is demonstrated for four 2D boronate ester-linked COFs. The diameter of individual COF nanoparticles in solution is monitored and quantified during COF growth and stabilization at elevated temperature using in situ variable-temperature liquid cell transmission electron microscopy imaging, a new characterization technique that complements conventional bulk scattering techniques. Solution casting of the colloids yields a free-standing transparent COF film with retained crystallinity and porosity, as well as preferential crystallite orientation. Collectively this structural control provides new opportunities for understanding COF formation and designing morphologies for device applications.

Synchronized Offset Stacking: A Concept for Growing Large-Domain and Highly Crystalline 2D Covalent Organic Frameworks

Covalent organic frameworks (COFs), formed by reversible condensation of rigid organic building blocks, are crystalline and porous materials of great potential for catalysis and organic electronics. Particularly with a view of organic electronics, achieving a maximum degree of crystallinity and large domain sizes while allowing for a tightly π-stacked topology would be highly desirable. We present a design concept that uses the 3D geometry of the building blocks to generate a lattice of uniquely defined docking sites for the attachment of consecutive layers, thus allowing us to achieve a greatly improved degree of order within a given average number of attachment and detachment cycles during COF growth. Synchronization of the molecular geometry across several hundred nanometers promotes the growth of highly crystalline frameworks with unprecedented domain sizes. Spectroscopic data indicate considerable delocalization of excitations along the π-stacked columns and the feasibility of donor–acceptor excitations across the imine bonds. The frameworks developed in this study can serve as a blueprint for the design of a broad range of tailor-made 2D COFs with extended π-conjugated building blocks for applications in photocatalysis and optoelectronics.

From Highly Crystalline to Outer Surface-Functionalized Covalent Organic Frameworks--A Modulation Approach.

Crystallinity and porosity are of central importance for many properties of covalent organic frameworks (COFs), including adsorption, diffusion, and electronic transport. We have developed a new method for strongly enhancing both aspects through the introduction of a modulating agent in the synthesis. This modulator competes with one of the building blocks during the solvothermal COF growth, resulting in highly crystalline frameworks with greatly increased domain sizes reaching several hundreds of nanometers. The obtained materials feature fully accessible pores with an internal surface area of over 2000 m2 g–1. Compositional analysis via NMR spectroscopy revealed that the COF-5 structure can form over a wide range of boronic acid-to-catechol ratios, thus producing frameworks with compositions ranging from highly boronic acid-deficient to networks with catechol voids. Visualization of an −SH-functionalized modulating agent via iridium staining revealed that the COF domains are terminated by the modulator. Using functionalized modulators, this synthetic approach thus also provides a new and facile method for the external surface functionalization of COF domains, providing accessible sites for post-synthetic modification reactions. We demonstrate the feasibility of this concept by covalently attaching fluorescent dyes and hydrophilic polymers to the COF surface. We anticipate that the realization of highly crystalline COFs with the option of additional surface functionality will render the modulation concept beneficial for a range of applications, including gas separations, catalysis, and optoelectronics.

Reconstruction of Covalent Organic Frameworks by Dynamic Equilibrium.

Covalent organic frameworks (COFs) are periodic two- or three-dimensional polymeric networks with high surface areas, low density, and designed structures. Because COFs are normally prepared based on reversible formation of covalent bonds with relatively weak stability, their structures can be easily broken or damaged due to changes in the surrounding environment. Thus, developing strategies to realize the reconstruction of COFs in order to extend their usage lifetime is crucial for practical applications. In addition, exploring the kinetics of COF growth under varied reaction conditions is important for better understanding the nucleation and growth processes of COFs. In this work, the reformation mechanism of an imine-based COF using an ex situ characterization method was investigated, disclosing an interesting COF reconstruction progress from disorder to order. The present study shows the regeneration ability of COFs, and the developed method could be generalized for broader use in the field.

Mechanistic studies of two-dimensional covalent organic frameworks rapidly polymerized from initially homogenous conditions.

Covalent organic frameworks (COFs) are periodic two- and three-dimensional (2D and 3D) polymer networks with high surface areas, low densities, and designed structures. Despite intense interest in framework materials, the nucleation and growth processes of COFs, and even of more established metal-organic frameworks (MOFs), are poorly understood. The kinetics of COF growth under varied reaction conditions provides mechanistic insight needed to improve their crystallinity and rationally synthesize new materials. Such kinetic measurements are unprecedented and difficult to perform on typical heterogeneous COF reaction mixtures. Here we synthesize 2D boronate ester-linked COF-5 under conditions in which the monomers are fully soluble. These homogeneous growth conditions provide equal or better material quality compared to any previous report and enable the first rigorous studies of the early stages of COF growth. COF-5 forms within minutes, and the precipitation rate is readily quantified from optical turbidity measurements. COF-5 formation follows an Arrhenius temperature dependence between 60-90 °C with an activation energy of 22-27 kcal/mol. The measured rate law includes a second order in both boronic acid and catechol moieties, and inverse second order in MeOH concentration. A competitive monofunctional catechol slows COF-5 formation but does not redissolve already precipitated COF, indicating both dynamic covalent bond formation and irreversible precipitation. Finally, stoichiometric H2O provides a 4-fold increase in crystallite domain areas, representing the first rational link between reaction conditions and material quality.