Great Xing Research Articles

Mineralogical evidence for the role of deep magmatic fluids in beryllium enrichment in magmatic-hydrothermal systems

Vein-type and greisen-type beryllium (Be) mineralization is closely associated with the magmatic-hydrothermal evolution in highly fractionated granites. However, the source of ore-forming fluids and their role in the migration and enrichment of Be is poorly understood. Although whole rock Ba-Rb isotope researches highlight that even deep magmatic fluids beneath the shallow magmatic-hydrothermal systems could provide rare metals and promote mineralization, it is still challenging to determine the influences of such fluids via using conventional geochemical indicators. Here we present zircon-monazite-xenotime-wolframite U-Pb ages, whole-rock geochemistry, monazite Nd isotopes, as well as muscovite and beryl geochemistry for the Zhujiayingzi quartz vein-type Be mineralization in the southern Great Xing’an Range (SGXR), Northeast (NE) China, and introduce the neighboring Nasigatu gresien-type Be mineralization for comparison. Geochronological results reveal that the Zhujiayingzi beryl-wolframite-bearing quartz veins formed in the Early Cretaceous (149–147 Ma), much younger than the host Permian (270–267 Ma) crystal tuffs, but coeval with the Nasigatu highly fractionated alkali-feldspar granite (144–139 Ma). Similar muscovite-beryl compositions and monazite Nd isotopes, combining with their close temporal-spatial relationships indicate that the Zhujiayingzi and Nasigatu Be mineralization have consistent hydrothermal assemblages and enrichment processes. Higher silica, K, and lower Al contents of muscovites from Be-rich veins (M2) and greisens (M4) than those recorded in barren crystal tuffs (M1) and alkali-feldspar granite samples (M3) at both Zhujiayingzi and Nasigatu are consistent with the evolution of the Early Cretaceous granitic magma, proving the involvement of shallow magmatic fluids exsolved from the Nasigatu-like highly evolved granitic melts. However, ore-related M2 and M4 samples have higher Mg (>1 wt%) and Ti contents than those of M1 and M3 samples, which violates the conventional hydrothermal evolution trend. Trace element compositions as well as K/Rb, K/Cs, and Rb/Sr ratios of four-type muscovites, together with the core-rim geochemical variations of muscovites at Zhujiayingzi and beryls at Nasigatu, indicate the existence of deep magmatic fluids rather than fluid-rock interaction to account for the anomalous mineralogical evidence. Such deep magmatic fluids were exsolved from large silicic magmatic reservoirs beneath the shallow magmatic-hydrothermal system, and thus likely display low evolution degrees and high Mg-Ti contents. They can not only provide heat and promote fluid-mineral interactions, but also can efficiently extract and transport Be enriched in deep crystal mushes at different depths. Thus we invoke that the Early Cretaceous Be mineralization in the SGXR was achieved under the combined action of both shallow and deep magmatic fluids derived from the crystal mush-dominated transcrustal magmatic system.

Zircon in tin granite as tracer for fluid metasomatism and Sn mineralization

Most tin deposits in the world are genetically related to tin granite and form during complex magmatic-hydrothermal processes. Zircon is a common accessory mineral in granite and related ore systems and can host a number of ore metals, such as Sn, W, Nb, Ta, U and Th, in its crystal lattice. However, whether metal enrichment/depletion can trace ore-forming processes is still unclear. Here, we report that the metal concentrations in various types of zircons from the Mopanshan tin granites in the southern Great Xing'an Range (Northern China) can be used as good indicators of fluid metasomatism and Sn mineralization. Two lithological zones are developed in the Mopanshan pluton, including porphyritic syenogranite (PG) in the center and fine-grained syenogranite (FG) at the margin. Zircons in the PG (PGZ-1, PGZ-2, and PGZ-3) are all magmatic in origin, while zircons in the FG can be categorized into magmatic zircons (FGZ-1 and FGZ-2) and metasomatic zircons (FGZ-3). The PGZ-1 and FGZ-1 grains are transparent prismatic crystals with bright oscillatory zonation, whereas the PGZ-2 grains are murky crystals with dark oscillatory zonation. PGZ-3 and FGZ-2 grains occur as overgrowths of previously formed zircon (PGZ-1, PGZ-2, and FGZ-1) or as brown individual crystals, showing dark and homogeneous cathodoluminescence (CL) textures. The metasomatic FGZ-3 grains are translucent-opaque porous crystals with vermicular CL zonation and commonly replace FGZ-2. The trace element compositions of magmatic zircons are completely melt controlled, providing a record of magmatic evolution as a constant decrease in Zr/Hf ratios and a gradual increase in Th, U, Nb, and Ta contents. Moreover, the structure of magmatic zircons transforms from a crystalline state to an amorphous state as a consequence of radioactive decay of U and Th. A coupled dissolution-reprecipitation process is proposed for the formation of metasomatic FGZ-3. The reactive fluid is the magmatic fluid that exsolved from the melt in the late magmatic stage. The magmatic fluid replaced biotite and rare earth phosphates (mainly monazite and apatite) enclosed within biotite, resulting in significant amounts of Nb, Ta, Sn, P, Al, Ca, Fe, and REEs, which subsequently reacted with the FGZ-2 zircons to leach Th, U, Y, and HREEs. Eventually, REEs, Y, Th, and U in the fluid combined with P to form monazite and xenotime, while the other elements partially precipitated with the crystallization of the FGZ-3 zircons. Although the alteration of biotite only released approximately 190 ppm of Sn into the fluid, this is still a significant Sn source for the Sn deposits surrounding the Mopanshan pluton, taking the granite size (∼50 km2) and the volume proportion of biotite (∼5%) into account. Furthermore, based on previous studies on tourmaline from the Mopanshan granite and regional geochemistry, it may be inferred that the addition of wall rock components may also play an important role in Sn mineralization.

Petrogenesis of Variscan and Yanshanian magmatic rocks in the Longjiang region of Heilongjiang province and implications for ore exploration

The Longjiang region is located on the eastern slope of the southern section of the Great Xing'an Range, in the transition zone between the Songliao Basin and Great Xing'an Range uplift. As it is an extension of the Inner Mongolia Linxi-Tuquan Cu-Mo-Pb-Zn metallogenic belt in the Heilongjiang region, it has conditions conducive to the formation of porphyry deposits. We report zircon U-Pb dating and whole-rock geochemistry data of magmatic rocks in representative mineralized points in the Longjiang region. Zircon U-Pb age shows that the age of magmatic rocks is concentrated in the Variscan period (312 ± 5 ∼ 294 ± 2Ma) and Yanshanian period (134 ± 2 ∼ 123 ± 1Ma). According to whole-rock geochemical analysis, the granites have SiO2 contents of 61.2–69.16 % (66.9 % on average), Al2O3 contents of 13.87–15.98 %, MgO contents of 0.6–2.22 %, TiO2 contents of 0.25–0.88 %, K2O contents of 2.70–3.63 %, Na2O/K2O ratios of 1.05–2.05, and high K2O+Na2O contents (5.8–7.17 %), which are consistent with adakitic rocks. Yanshanian granites have A/CNK values of 1.02–2 and an average differentiation index of 84.7, which indicates that they are highly differentiated I-type granites. Variscan I-type granites represent the post-collisional setting of the Paleo-Asian Ocean and are relatively scarce in the region. Yanshanian highly differentiated I-type granites are products of the Paleo-Pacific Ocean's post-collisional retreat and are widely distributed in the region. As the materials and fluids that formed the Liujiushan, Haiyang, and Fendou deposits were derived from magmatic activities, and Variscan and Yanshanian magmas have excellent ore-forming potential. The highly differentiated I-type granites formed by intense Yanshanian magmatism are the most promising candidates for ore exploration in this region.

The Ordovician Arc–Basin System in the Northern Great Xing’an Range (Northeast China): Constraints from Provenance Analysis of the Luohe Formation

The Northeast China Block is a major component of the Central Asian Orogenic Belt, and its tectonic evolution has attracted much research attention. Ordovician strata are important in reconstructing the tectonic evolution of the Northeast China Block. This paper presents the results of sedimentological, zircon U–Pb, and geochemical analyses of sandstones of the Luohe Formation in the Wunuer area, Northern Great Xing’an Range, Northeast China. Lithological data, sedimentary structures, and grain-size analysis indicate that the Luohe Formation was deposited in a shallow marine environment. Detrital zircon U–Pb dating yields age peaks of 463, 504, 783, 826, 973, and 1882 Ma for sandstones from the Luohe Formation. The youngest zircon grain age of 451 ± 6 Ma represents the maximum depositional age of the Luohe Formation. The peak age at 463 Ma is consistent with the timing of post-collisional magmatism and the formation of the Duobaoshan island arc, while the peak at 504 Ma is consistent with the timing of magmatic activity related to the collision between the Erguna and Xing’an blocks. The peaks at 788, 826, 973, and 1882 Ma correspond to magmatism in the Erguna block, these ages indicate that the sandstones of the Luohe Formation were derived mainly from the Erguna block. Sandstone modal compositional analysis indicates that the provenance of the Luohe Formation was mainly a magmatic arc. The geochemical compositions of the sandstones suggest that the source rocks have continental island arc signatures. Based on the depositional age, sedimentary environment, provenance, and regional geology, it is concluded that the Luohe Formation was deposited in a back-arc basin setting during the formation of the Duobaoshan island arc–basin system in response to subduction of the Paleo-Asian oceanic plate.

Evaluating Dendrolimus superans (Lepidoptera: Lasiocampidae) Occurrence and Density Modeling with Habitat Conditions

Dendrolimus superans, a prominent forest pest in northeast China, exerts detrimental effects on tree growth and development, disrupts the ecological functioning of forests, and even alters the trajectory of succession. The objective of this study was to investigate the influence of habitat conditions on the occurrence probability and density of overwintering D. superans, aiming to provide scientific insights for the effective prevention of and control measures against this pest infestation. The investigation encompassed 142 plots (20 m × 20 m) in various forest types within the primary distribution area of D. superans in the Great Xing’ an Mountains, focusing on factors such as topography, forest vegetation, and larval density. Binary logistic regression was employed to establish models for predicting the occurrence probability of D. superans, while generalized linear models (GLMs) and categorical regression (CATREG) were utilized to develop models for estimating its population size. Subsequently, an evaluation was conducted to assess the performance of these models. The occurrence probability model showed high accuracy (AUC = 0.826) in predicting infestation. The slope aspect and herb cover were the key factors affecting the occurrence of D. superans. The occurrence probability was the lowest on shady slopes and the highest on sunny slopes. The occurrence probability of D. superans increased with the increase in herb cover. The model of quantification showed that the density of D. superans was the least on shady slopes and the highest on sunny slopes. As the slope gradient increased, the density decreased. D. superans occurred most frequently on ridges. Similarly, with the increase in canopy cover or the decrease in diameter at breast height (DBH) and stand density, the density of D. superans increased. The influence of the topography factors surpassed that of the forest vegetation factors in shaping the population dynamics of D. superans, despite both being significant contributors. The study revealed that D. superans is prone to occur on sunny slopes, flat slopes, and ridges, which should be the focus of prevention and control in forest management practices, such as replanting, thinning, and regular weeding, to help restrain the growth of the population of this pest.

Magmatic-hydrothermal fluid evolution of the tin-polymetallic metallogenic systems from the Weilasituo ore district, Northeast China

The large Weilasituo Sn-polymetallic deposit is a recent exploration discovery in the southern Great Xing’an Range, northeast China. The ore cluster area shows horizontal mineralization zoning, from the inner granite body outward, consisting of high-T Sn–W–Li mineralization, middle-T Cu–Zn mineralization and peripheral low-T Pb–Zn–Ag mineralization. However, the intrinsic genetic relationship between Sn-W-Li mineralization and peripheral vein-type Pb–Zn–Ag–Cu mineralization, the formation mechanism and the deep geological background are still insufficiently understood. Here, we use fluid inclusions, trace elements concentrations in quartz and sphalerite, and H–O isotope studies to determine the genetic mechanism and establish a metallogenic model. Fluid inclusion microthermometry and Laser Raman spectroscopic analysis results demonstrates that the aqueous ore-forming fluids evolved from low-medium salinity, medium–high temperature to low salinity, low-medium temperature fluids. Laser Raman spectroscopic analysis shows that CH4 is ubiquitous in fluid inclusions of all ore stages. Early ore fluids have δ18OH2O (v–SMOW) values from + 5.5 to + 6.2‰ and δD values of approximately − 67‰, concordant with a magmatic origin. However, the late ore fluids shifted toward lower δ18OH2O (v–SMOW) (as low as 0.3‰) and δD values (~ − 136‰), suggesting mixing between external fluids derived from the wall rocks and a contribution from meteoric water. Ti-in-quartz thermometry indicates a magmatic crystallization temperature of around 700 °C at a pressure of 1.5 kbar for the magmatic ore stage. Cathodoluminescence (CL) imaging and trace element analysis of quartz from a hydrothermal vug highlight at least three growth episodes that relate to different fluid pulses; each episode begins with CL-bright, Al-Li-rich quartz, and ends with CL-dark quartz with low Al and Li contents. Quartz from Episode 1 formed from early Sn-(Zn)-rich fluids which were likely derived from the quartz porphyry. Quartz from episodes 2 and 3 formed from Zn-(Sn)-Cu-rich fluid. The early magmatic fluid is characterized by low fS2. The SO2 produced by magma degassing reacted with heated water to form SO42−, causing the shift from low fS2 to high fS2. The SO42− generated was converted to S2– by mixing with CH4-rich, Fe and Zn-bearing external fluid which led to late-stage alteration and dissolution of micas in vein walls, thus promoting crystallization of pyrrhotite, Fe-rich sphalerite and chalcopyrite and inhibiting the precipitation of anhydrite. This study shows that ore formation encompassed multiple episodes involving steadily evolved fluids, and that the addition of external fluids plays an important role in the formation of the later Cu–Zn and Ag–Pb–Zn mineralization in the Weilasituo ore district.

Zircon Hf Isotope Mapping for Understanding Crustal Architecture and Its Controls on Mineralization during Early Cretaceous in the Southern Great Xing’an Range, NE China

Zircon Hf Isotope Mapping for Understanding Crustal Architecture and Its Controls on Mineralization during Early Cretaceous in the Southern Great Xing’an Range, NE China

Linking beryllium enrichment to crystal-melt separation in granitic magmatic systems: Insights from high-silica granites in the southern Great Xing’an Range, NE China

High-silica granites are significant carriers of highly incompatible elements and are closely associated with mineralization of the rare metal beryllium. Thus, understanding their origin and evolution is of paramount importance for comprehending the evolution of the continental crust and enrichment processes of beryllium. This study presents zircon U-Pb ages, whole-rock major and trace element compositions, and Nd-Hf-O isotopic data for Early Cretaceous high-silica granite porphyries, monazite U-Pb ages and Nd isotopic data for beryllium-rich quartz veins, and whole-rock and apatite Nd isotopic data for Permian tuffs in the Dongshanwan W-Mo-Be deposit in the southern Great Xing’an Range, northeastern China. Our aim is to elucidate the link between mineralization and magmatism and to further our insight into the processes of crystal-melt separation and the mechanisms driving beryllium enrichment in granitic magmatic systems. Zircon U-Pb dating of the high-silica granite porphyry yields a weighted mean 206Pb/238U age of 141 ± 1 Ma, which is consistent with the age of hydrothermal monazite (ca. 140 Ma) from the beryllium-rich quartz veins. Hydrothermal monazite from the intra-granite porphyry quartz vein has positive εNd(t) values (+0.76 to +1.63) that overlap broadly with whole-rock Nd isotopic compositions of the host granite porphyry [εNd(t) = +1.24 to +1.61]. These characteristics indicate that the Dongshanwan beryllium mineralization was temporally and genetically associated with magmatic-hydrothermal activity of the Dongshanwan high-silica granite porphyries. Our systematic studies suggest that both the Dongshanwan high-silica granite porphyries and coeval Be-barren high-silica granites in the study area are high-K calc-alkaline I-type granites. They originated from a shared magmatic system and formed by the partial melting of a predominantly juvenile medium- to high-K basaltic crustal source, with a minor addition of old crustal components. Rayleigh fractionation modeling indicates that the granitic magma underwent a two-stage crystal-melt separation process. During the first stage, the fractional crystallization of a large proportion of plagioclase, in which beryllium is compatible, not only effectively inhibited beryllium enrichment in the differentiated melt, but also removed a large amount of Ca. During the second stage, minerals in which beryllium is incompatible dominated the fractionating assemblage owing to the low Ca contents in the magma, resulting in a surge in beryllium concentration in the differentiated melt. Our findings reveal that beryllium cannot be appreciably enriched in calc-alkaline granitic magmatic systems until plagioclase fractionation has substantially removed Ca from the system.

Trace elements and growth patterns in quartz from the Alubaogeshan granite in the Maodeng Mo-Bi-Sn-Cu deposit, southern Great Xing’an Range, NE China

The Maodeng Mo-Bi-Sn-Cu deposit is located in the southern segment of the Great Xing’an Range in northeastern China. The Alubaogeshan complex is the major intrusion in this region, which is composed of porphyritic monzogranite (PMG), granite porphyry (GP), and alkali feldspar granite (AFG). We conducted SEM-CL and LA-ICP-MS analyses to examine internal textures and trace elements of quartz from three facies, aiming to uncover the petrogenetic connections among the different lithologies. Quartz phenocrysts from PMG and GP exhibit smudged pre-resorption core, and post-resorption quartz overgrowths with higher Ti concentration and CL intensity, whereas quartz from AFG shows a taxitic structure, with an outward decrease in Ti concentration and CL intensity. There is a positive correlation between CL intensity and Ti content in magmatic quartz. The Al/Ti and Ge/Ti ratios in quartz indicate that the degrees of differentiation of PMG and GP are comparable and relatively low, while that of AFG is high. Trace element contents also exhibit characteristic evolution during magmatic differentiation, with the higher Al, Be, Ge, Rb, and B, and the lower Ti contents in quartz from the highly evolved AFG, and the higher Ti values in quartz from the less evolved PMG. A strong correlation between Al and Li concentrations suggests that Li+ is a primary charge compensator of Al3+ substituting for Si4+ in quartz, with the remaining Al3+ equilibrating with H+. The entry of Al into quartz is mainly controlled by crystallization temperature in the less evolved granite, but magmatic differentiation exerts a key role in the highly evolved granite. Magma differentiation is a primary factor influencing Ge incorporation into quartz. Quartz crystals from PMG and GP display textural and chemical evidence of high-Ti, -CL, and -temperature overgrowth, indicating multiple recharges of mafic magma into the felsic magma chamber. This process could have supplied abundant metals to the granitic magma system and contributed to the formation of the Maodeng deposit.

Variation and Driving Mechanisms of Bark Thickness in Larix gmelinii under Surface Fire Regimes

Bark is vital for woody plants, providing protection, transporting nutrients and water, and storing essential resources. For fire-prone ecosystems, bark thickness is a key adaptive trait conferring fire resistance. Few studies have been conducted on the drivers of variation in bark thickness of the widely distributed Larix gmelinii (Rupr.) Kuzen in the Great Xing’an Mountains region, on the southern edge of East Siberia, where surface fire disturbances are frequent. To elucidate the relationships between variation in bark thickness (inner vs. outer bark) of L. gmelinii and plant size, environmental factors, and co-variation with other fire-tolerance traits, we selected 26 sites to set up plots and carried out a survey and bark sampling. Results showed that stem diameter primarily determines variation in bark thickness, especially outer bark. The proportion of outer bark to total bark increased accordingly as the tree increased in size. We also observed stronger correlated variation in outer bark thickness, tree height, and self-pruning capacity, implying that larger trees have thicker protective outer bark and taller heights with greater self-pruning, mitigating crown fire risks. Environmental factors appear to have a relatively limited effect on changes in bark thickness in L. gmelinii. Mean air temperature, annual precipitation, and total soil nitrogen content had some effect on outer bark thickness, and mean air temperature had some effect on inner bark thickness.

Genesis of the Supergiant Shuangjianzishan Ag–Pb–Zn Deposit in the Southern Great Xing’an Range, NE China: Constraints from Geochronology, Isotope Geochemistry, and Fluid Inclusion

The supergiant Shuangjianzishan (SJS) Ag–Pb–Zn deposit, located in the southern Great Xing’an Range (SGXR), is the largest Ag deposit in China. The SJS deposit can be divided into two ore blocks: the Shuangjianzishan ore block and the Xinglongshan ore block. Given the importance of the Xinglongshan ore block in the SJS deposit, our work is focused on the Xinglongshan ore block. The vein orebodies in the Xionglongshan ore block mainly occur in the NW-, NNW-, and NNE-trending fault zones, and its mineralization is mainly related to a deep concealed syenogranite. Here, we present new geochronology, isotope geochemistry, and fluid inclusion data for the Xinglongshan ore block and provide additional insights into the metallogenic mechanism of the deposit. The dating results show that the syenogranite related to the mineralization formed at approximately 137 Ma, which is coherent with some previous age determinations in sulfides from the ore deposit. The mineralization of the Xinglongshan ore block can be divided into four stages: sphalerite–arsenopyrite–pyrite–chalcopyrite–quartz stage (stage I), sphalerite–galena–pyrite–silver-bearing mineral–quartz stage (stage II), sphalerite–galena–silver-bearing mineral–quartz–calcite stage (stage III), and weakly mineralized quartz–calcite stage (stage IV). Four types of fluid inclusions (FIs) have been identified within quartz and calcite veins: liquid-rich, gas-rich, pure-liquid, and pure-gas FIs. The homogenization temperatures in the four stages exhibit a gradual decrease, with stage I ranging from 253 to 302 °C, stage II from 203 to 268 °C, stage III from 184 to 222 °C, and stage IV from 153 to 198 °C, respectively. The salinity for stages I, II, III, and IV falls within the ranges of 3.4–6.6 wt% NaCl eqv., 2.6–7.2 wt% NaCl eqv., 2.9–7.0 wt% NaCl eqv., and 1.2–4.8 wt% NaCl eqv., respectively, indicative of a low-salinity ore-forming fluid. The δ18Owater and δD values of the ore-forming fluid span from −13.9‰ to 7.4‰ and −145‰ to −65‰, with δ13CV-PDB values between −11.0‰ and −7.9‰. These values suggest that the ore-forming fluid predominantly originated from a mixture of magmatic and meteoric water. The 206Pb/204Pb, 207Pb/204Pb, and 208Pb/204Pb ratios of sulfides range from 18.278 to 18.361, 15.530 to 15.634, and 38.107 to 38.448, respectively. These ratios imply that the ore-forming material was primarily derived from the Early Cretaceous granitic magma, which resulted from the mixing of depleted mantle- and crustal-derived magmas. The fluid mixing was the dominant mechanism for mineral precipitation. The Xinglongshan ore block belongs to a magmatic-hydrothermal vein-type deposit related to the Early Cretaceous syenogranite, and the Shuangjianzishan ore block belongs to an intermediate sulfidation epithermal deposit related to coeval subvolcanic rocks. The Ag–Pb–Zn mineralization at Shuangjianzishan is genetically related to the Early Cretaceous volcanic–intrusive complex.

Geochronology and geochemistry of the Beidashan pluton in the southern Great Xing'an Range, Northeast China: Implication for its petrogenesis and metallogenic potential

Geochronology and geochemistry of the Beidashan pluton in the southern Great Xing'an Range, Northeast China: Implication for its petrogenesis and metallogenic potential

Silver Behavior During Magmatic and Magmatic-Hydrothermal Evolution of a Highly Evolved Reduced Granitic System Related to the Giant Shuangjianzishan Ag-Pb-Zn-(Sn) Epithermal Deposit, Northeast China

Abstract Magmatic-related epithermal silver-rich polymetallic deposits are among the most important sources of Ag in the world, and they are found associated with magmatic systems with striking differences. Most of the time, they are associated either with I-type oxidized (magnetite-series granite) intermediate to evolved intrusions or with S-type/A-type reduced (ilmenite-series granite) highly evolved intrusions. To better understand these associations, the Ag evolution has been tracked during the magmatic differentiation and the magmatic-hydrothermal transition stage of A-type highly evolved porphyritic granites associated with the giant Shuangjianzishan Ag-Pb-Zn-(Sn) epithermal deposit, the largest known Ag deposit of Asia (145 million tonnes at 128.5 g/t Ag and 2.2 wt % Pb + Zn) located in the largest known metallogenic province for Ag in China (the southern Great Xing’an Range). At the Shuangjianzishan deposit, the porphyritic granite complex consists of three temporally distinct intrusions—a coarse-grained monzogranite porphyry, a fine-grained syenogranite porphyry, and a fine-grained syenogranite—having crystallized at ~2 kbar and ~750°C and recording a continuous magmatic differentiation trend. The silicate melt that generated the last highly differentiated intrusion (fine-grained syenogranite) is interpreted as the source of the mineralizing fluids forming the Shuangjianzishan Ag-Pb-Zn-(Sn) epithermal deposit, as it is the only intrusive unit that reached fluid saturation, as indicated by cotrapped fluid and melt inclusions in quartz phenocrysts and by the occurrences of unidirectional solidification textures (USTs). Silver evolution in the different porphyritic granite facies was reconstructed with laser ablation-inductively coupled plasma-mass spectrometry analyses of quartz-hosted silicate melt inclusions, amphibole-hosted magmatic sulfide inclusions, and chemical modeling. The silicate melt forming the porphyritic granite complex was sulfide saturated during the first crystallization stage, as shown by the occurrence of Ag-rich monosulfide solid solution (MSS) inclusions hosted in amphibole phenocrysts from the coarse-grained monzogranite porphyry and from mafic microgranular enclaves hosted in the coarse-grained monzogranite porphyry. However, these Ag-rich MSSs had only a minimal impact on the Ag budget of the magmatic system, as shown by the increase of the Ag concentration (~100–1,000 ppb) in quartz-hosted silicate melt inclusions during the further evolution of the system until fluid exsolution was reached. These results combined with mass balance modeling suggest that Ag and Sn are efficiently transferred to the evolving residual melt during crystallization and crystal-melt segregation. The results of this study indicate that highly Ag endowed epithermal polymetallic deposits can be formed from the exsolution of Ag-rich mineralizing fluids from relatively low volume, highly evolved, reduced melts, similar to those responsible for the formation of Sn-rich greisen deposits.

Fluid evolution and genesis of the Changchunling Pb–Zn deposit in the Southern Great Xing'an Range, Northeast China: Constraints from fluid inclusions and H–O–S–Pb isotopes

AbstractThe southern Great Xing'an Range (SGXR), an important polymetallic metallogenic province in the eastern Central Asian Orogenic Belt (CAOB) in Northeast China, containing numerous ore deposits of Cu, Fe, Pb, Zn, Au, and so forth. The Changchunling Pb–Zn deposit, located in the eastern segment of the SGXR, is primarily hosted by a Permian conglomerate and siltstone unit. The paragenetic sequence of the deposit can be divided into three stages involving arsenopyrite–quartz (stage I); pyrite–sphalerite–galena–quartz (stage II); and barren quartz–carbonate (stage III). Fluid inclusion (FIs) microthermometric studies revealed that only liquid‐rich aqueous inclusions (VL‐type FIs) are observed in the ore‐bearing quartz veins. The FIs of stages I, II, and III yield homogenization temperatures of 190–314, 170–268, and 140–195°C with salinities of 9.73–13.44, 7.86–10.74, and 4.94–5.99 wt% NaCl eqv., respectively. The ore‐forming fluids are characterized by low temperature and low salinity of the H2O–NaCl fluid system. The δ18OH2O and δD values range from −11.8‰ to 0‰ and −120.4‰ to −99.9‰, respectively, indicating that the source of the fluids was primarily derived from a mixed fluid of magmatic water and meteoric water. Fluid cooling, mixing and fluid‐rock reactions were the major ore precipitation mechanisms at Chanchunling. Sulfur‐lead isotopes of pyrite and sphalerite (δ34S = 2.3‰–3.7‰, 206Pb/204Pb = 18.259–18.285, 207Pb/204Pb = 15.544–15.57, and 208Pb/204Pb = 38.136–38.215) indicate that ore metals had a magmatic source. Integrating the available geological, mineralization, fluid inclusion, and H–O–S–Pb isotope evidence, we conclude that the Changchunling Pb–Zn deposit is an epithermal system, which shares many similar features with the regional Pb–Zn polymetallic deposit.

Textural and chemical variations of sphalerite in the Giant Shuangjianzishan Ag-Pb-Zn deposit, South Great Xing’an Range, China: Implications for ore-forming processes

The Shuangjianzishan vein-type Ag-Pb-Zn deposit (145 Mt of ore grading 128.5 g/t Ag, 1.8 wt% Pb and 0.5 wt% Zn) in the South Great Xing’an Range (NE China) is hosted in NW- and NE-trending veins crosscutting the Lower Permian Dashizhai Formation, which is intruded by a granite porphyry. Although Ag-Pb-Zn sulfide mineralization has been extensively studied, the detailed ore-forming processes remain unclear. We have identified four stages of sulfide assemblages containing three generations of sphalerite: (1) Quartz arsenopyrite sphalerite (Sp1) stage; (2) Galena Ag-minerals sphalerite (Sp2) stage; (3) Ag-minerals pyrrhotite sphalerite (Sp3) stage; and (4) Pyrite calcite stage. Stages 2 and 3 are economically important. The textures of Sp1, Sp2, and Sp3 directly record the ore-forming processes, and the mineralization of silver shows an evolution trend from simple sulfides to complex sulfosalts. LA-ICP-MS trace element analyses showed that the Sp1 contains low content of silver and other trace elements (Fe, Mn, Sn, Cu, and Pb), indicating an anoxic to an euxinic environment. Stage 2 contributed largely to the silver endowment, with relatively high silver content in sphalerite or Ag-bearing mineral inclusions in Sp2a, Sp2b, and galena. Most of the silver minerals were deposited during stage 3, with sulfide and sulfosalt assemblages (e.g., pyrargyrite + canfieldite + tetrahedrite with minor pyrrhotite) replacing Sp2b. Selenium is significantly enriched in Sp3 and selenium-rich canfieldite from Stage 3. Sulfur isotopes determined by in situ LA-multicollector (MC)-ICP-MS analyses of sphalerite vary significantly from −9.6 to 2.2 ‰ (δ34SSp1 = -4.1 ∼ 1.1 ‰; δ34SSp2 = -4.2 ∼ 2.2 ‰; δ34SSp3 = -9.6 ∼ -2 ‰). Sulfur was possibly derived from the magmas forming the granite porphyry (δ34S = 1.4 ‰) and the magmatic sulfur reservoir was oxidized by mixing with the Dashizhai stratum sulfur (δ34S: −4.9 to −6.5 ‰). This resulted in lowering of the fluid δ34S value during the deposition of Sp3. The textural, chemical and isotopic data indicate distinct ore-forming episodes at Shuangjianzishan. We suggest that the deposition of abundant Ag-bearing minerals was induced by a new volume of Ag-rich ore-forming fluids and triggered by extensive decompression and cooling during Stage 3. The sulfur isotope and chemical geothermometers suggest the involvement of relatively high-temperature (>330 °C) hydrothermal fluid during Stage 2. Unlike a single cooling mineralization process, the superposition of relatively high-temperature mineralizing fluids may be an important factor in the large-scale Ag-Pb-Zn mineralization at Shuangjianzishan.

Coupling Between Exhumation and Subduction: A Case Study From the Southern Great Xing'an Range, NE Asia

AbstractThe link between subduction and continental exhumation is explored using high‐resolution thermal histories from southern Great Xing'an Range (GXR), NE Asia and integrated with a regional low‐temperature thermochronology data synthesis from the NE Asian continental margin. The GXR thermal histories are constrained by multiple thermo‐, geochronometers (zircon, titanite, apatite U‐Pb, zircon, apatite (U‐Th)/He and apatite fission track). These data yield a large range in U‐Pb ages (292–119 Ma) with enhanced exhumation mainly during the early Cretaceous (ca. 155–110 Ma) in an extensional regime linked to roll‐back of the Paleo‐Pacific Ocean and consequent lithospheric thinning and delamination. Integrated with Cretaceous‐Cenozoic low‐temperature thermochronological data from the NE Asian continent margin, three regional phases of exhumation are recognized, which can be linked to changes in the geometry and kinematics of the subduction systems of the Paleo‐Pacific and Pacific oceans, demonstrating coupling between the subducting plate and the continental margin at active plate boundaries.

Origin of Early Cretaceous mafic volcanic rocks from the Erlian Basin west of the Great Xing’an Range of North China: Implications for the tectono-magmatic evolution of East Asia

Early Cretaceous intraplate volcanic rocks are widespread in NE Asia, but their origin remains controversial. This work presents zircon U-Pb ages, whole-rock element and Sr-Nd isotope data for mafic volcanic rocks from the Erlian Basin, a wide rift basin in NE Asia. There were two episodes of Early Cretaceous mafic volcanism in the Erlian Basin, and the eruptions show contrasting geochemical compositions. The early mafic volcanic rocks, with U-Pb ages of ca. 140−135 Ma, show slightly depleted Sr-Nd isotope compositions (ISr(t) = 0.7042−0.7052; εNd(t) = +0.82 to +3.0) and arc-like trace-element compositions, which are derived from subduction-related fluid/melt metasomatized lithosphere mantle. The late mafic volcanic rocks (dated at ca. 125 Ma) have enriched Sr-Nd isotopes (ISr(t) = 0.7055−0.7077; εNd(t) = −0.50 to −2.67) and oceanic-island basalt (OIB)-like trace-element compositions, revealing the metasomatism of melts from crustal materials and asthenosphere mantle. The two types of mafic volcanic rocks may record the interactions of the mantle and melts from the subducted paleo-Pacific oceanic slab at different depths. The landward-then-oceanward migration pattern of the Mesozoic volcanism from NE Asia can be explained by the flat subduction and subsequent slab roll-back of the Paleo-Pacific Ocean, consistent with migration patterns from the North China Craton and South China Block, implying similar Jurassic−Cretaceous subduction evolution along the entire East Asia margin. Some Late Jurassic to Early Cretaceous dates from east Mongolia and the southern margin of the Erlian Basin diverge from this trajectory. In combination with previous studies, we suggest that the Early Cretaceous pervasive intraplate volcanism in the Erlian Basin and adjacent areas of NE Asia mainly resulted from the slab roll-back of the Paleo-Pacific Ocean with a combined effect from the post-collision extension of the Mongol-Okhotsk orogen.

Petrogenesis and Tectonic Setting of Early Cretaceous A-Type Granite from the Southern Great Xing’an Range, Northeastern China: Geochronological, Geochemical, and Hf Isotopic Evidence

The southern Great Xing’an Range is located in the eastern Central Asian Orogenic Belt, where voluminous igneous rocks developed during the Late Mesozoic period. The east slope of the southern Great Xing’an Range has been the topic of numerous debates on the level of influence of the Mongol-Okhotsk and the Paleo-Pacific regimes in the Late Mesozoic period. Therefore, this area is a suitable region in which to study the temporal changes in magma sources and tectono-magmatic evolution. In this paper, whole-rock geochemical data, zircon U-Pb geochronology, and zircon Hf isotope studies were carried out on the granitoids in the east slope area of the southern Great Xing’an Range. LA-ICP-MS zircon U-Pb dating revealed the ages of four granitoid samples: 135.0 ± 0.6 Ma, 130.7 ± 1.4 Ma, 130.4 ± 1.0 Ma, and 127.6 ± 0.8 Ma, respectively. The Hf isotope values 176Hf/177Hf = 0.282751–0.283015, εHf (t) = +2.0~+11.5, and T2DM = 583~1442 Ma suggest that the magma was generated by partial melting of Meso- and Neoproterozoic accreted and thickened low crust. The whole-rock geochemical data implied that these granitoids are A-type granite and their formation is closely linked to the subduction of the Paleo-Pacific Ocean plate. These geochemical, isotopic, and geochronological data suggest that the Early Cretaceous magmatism in the east slope area of the southern Great Xing’an Range formed in an extensional back-arc tectonic setting associated with the slab roll-back of the Paleo-Pacific plate subduction.

Contribution discrepancy of two distinct wall rocks to wolframite mineralization from Dongshanwan quartz-vein tungsten deposit, Southern Great Xing’an Range, China

The Southern Great Xing’an Range is a significant polymetallic metallogenic belt in Northeast China. The ages of granite related to tungsten mineralization have been well quantified, however, the timing and mechanism of quartz vein-type wolframite deposition remain unclear. Therefore, our study focused on the Dongshanwan tungsten deposit, representing a typical wolframite-bearing quartz vein-type deposit in the Southern Great Xing’an Range. Quartz vein-type tungsten mineralization was mainly contained in the Early Cretaceous granite porphyry, with few exceptions in the Permian tuff. Representative wolframite samples were collected from intragranitic (Wol-I) and intra-tuff (Wol-II) quartz veins for wolframite U–Pb dating, electron probe microanalysis (EPMA), and trace elemental analysis. Wolframite U–Pb dating recognized an Early Cretaceous mineralization event at 139–141 Ma, consistent with the previous Dongshanwan granite’s ages (∼142 Ma) but much younger than tuff (∼260 Ma). All the wolframite samples belonged to the ferberite series (FeO/MnO = 4.0–6.9), which indicates a link to the highly fractionated granite. Wol-I showed high contents of Nb, Ta, Sc, and HREEs and a strongly negative Eu anomaly (0.02–0.29), while these elements in Wol-II were approximately one order of magnitude lower than in Wol-I and the Eu anomaly was highly variable (0.17–1.02). The redox characteristics reflected by the Eu anomaly of wolframite may correspond to the variations in oxygen fugacity. Based on petrology, geochemistry, and element mass migration, this study suggests that the granite porphyry and tuff in the Dongshanwan deposit contributed differently to the wolframite precipitation even if the ore-forming fluids were of a common magmatic-hydrothermal origin. The exsolved fluid reserved in the closed system interacts with granite to achieve continuous enrichment in Nb, Ta, Sn, and REEs and accepts external Fe supply from granite alteration to precipitate Wol-I. In contrast, the fluids in relatively open and non-granitic systems have lower Nb, Ta, Sn, and REEs than the former, and Fe supply depends on the alteration of tuff. The abundance of fluorite and the non-CHARAC (CHArge-and-RAdius-Controlled) behavior of Y/Ho and Zr/Hf in the wolframite suggested that fluorine plays an important role in the migration and enrichment of tungsten and other elements during tungsten mineralization.

Magma-related origin for Pb–Zn–Ag vein formation at the Aerhada deposit, Inner Mongolia, NE China: Constraints from fluid inclusion, C–H–O–S–Pb isotopic compositions, and geochronological studies

The Aerhada Pb–Zn–Ag deposit is on the western margin of the Great Xing’an Range in NE China. Prior studies on this deposit lack information regarding precise mineralization age and convincing genetic interpretation, which limits both the prospecting at Aerhada and the reconstruction of the regional metallogenic evolution. Based on a detailed field investigation and microscopic observation, in this study, our aim was to determine the origin and evolution of the hydrothermal system and the timing of magmatism and mineralization, as well as to develop a possible metallogenic model, by revealing information regarding the mineralization paragenetic relationship, fluid inclusions, H–O–C–S–Pb isotopes, and sphalerite Rb–Sr and zircon U–Pb ages. Three successive mineralization stages were recognized: stage I quartz-arsenopyrite-pyrite, stage II quartz-sphalerite-galena, and stage III fluorite-calcite-pyrite. Four types of fluid inclusions were also identified in host minerals: CH4-rich two-phase, halite-bearing, vapor-rich two-phase, and liquid-rich two-phase. Fluid inclusion and microthermometric results showed that the homogenization temperatures were 287–341 °C for stage I, 237–291 °C for stage II, and 162–230 °C for stage III, with respective salinities of 1.7–40.2 wt%, 6.7–10.9 wt%, and 4.2–8.8 wt% NaCl equivalent. The δ18Ofluid and δDfluid values of quartz in stage I (δ18Ofluid = 8.6–10.3 ‰, δDfluid = -126.6 to −124.3 ‰) indicated that initial magmatic water interacted with organic strata, while decreasing the values of quartz in stage II (δ18Ofluid = 3.9–6.8 ‰, δDfluid = -129.1 to −127.6 ‰) and calcite in stage III (δ18Ofluid = -3.5 to −1.0 ‰, δDfluid = -115.5 to −113.4 ‰), showing a trend of dilution and cooling by meteoric water. The negative δCfluid values (δCfluid = -15.9 to −12.6 ‰) of quartz fluid inclusions from stages I and II emphasize that organic carbon was added to the hydrothermal system through water–rock interactions. The δ34S values (δ34Ssulfides = 1.2–7.5 ‰) and lead isotope data of sulfides (206Pb/204Pb = 18.153–18.684, 207Pb/204Pb = 15.370–15.750, 208Pb/204Pb = 37.653–39.301), coupled with those of the hidden biotite granite and Devonian strata, indicate that the ore-forming material was primarily derived from magma and wall rocks. The sphalerite samples produced a Rb–Sr isochron age of 154.1 ± 3.5 Ma (2σ, MSWD = 0.82, n = 8), which was like the zircon U–Pb age of biotite granite (156.3 ± 1.4 Ma, 2σ, MSWD = 0.89, n = 14). Combining the alteration pattern, fluid inclusions, and isotopic and geochronological studies, it was concluded that Aerhada is a magma-related hydrothermal Pb–Zn deposit formed under the post-collision extension setting following the Mongol–Okhotsk Ocean closure during the Late Jurassic period. The proposed metallogenic model is expected to assist in the exploration and development of polymetallic mineralization in the Great Xing’an Range.