Grain-filling Process Research Articles

Sodium stress-induced oxidative damage and antioxidant responses during grain filling in Indica rice.

Sodium treatment caused the sodium ion accumulation at the milk stage of immature rice grains which in turn triggered the overproduction of reactive oxygen species and oxidative damage. The tolerant cultivar showed an enhanced antioxidative response and induced expressions of OsNHX and OsHKT ion-transporters. Sodium chloride-(NaCl) induced soil salinity is a major constraint hindering global rice production. Amongst its constituent ions, sodium (Na+) is known to be the main driver of toxicity under salt stress. The present investigation aims to measure the impacts of excess Na+ during rice grain filling using two Indica rice cultivars with opposite tolerances to salt (salt tolerant: Panvel-3, salt-sensitive: Sahyadri-3) mainly via oxidative and responsive antioxidative pathways. Plants were treated with Na+-specific treatments and NaCl with equimolar Na+ levels (100mM) at the initiation of the reproductive phase. Stressed and control plants were harvested at three different grain-filling stages- early milk, milk, and dough and assessed for ion accumulation and oxidative damage/antioxidant responses under Na+ stress. Na+ toxicity triggered reactive oxygen species (ROS) production and upregulated the responsive enzymatic antioxidants. Na+ stress also increased the nitric oxide (NO) levels and the activity of nitrate reductase in immature grains. Differential expression levels of OsNHX and OsHKT transporters were observed in response to Na+ stress. Mature grains displayed a high accumulation of Na+ along with reduced K+ content and elevated Na+/K+ under high Na+ availability. The alterations in mature grains' sugar, starch, and protein content were also observed in response to the Na+ stress. Overall, the salt-tolerant cultivar displayed higher antioxidant activities and a lower rate of ROS generation in response to the Na+ stress. Results suggested a link between Na+ accumulation, Na+-mediated stress responses via anti/-oxidant pathways, and the grain-filling process in both rice cultivars.

Mitigating Dry–Hot–Windy Climate Disasters in Wheat Fields Using the Sprinkler Irrigation Method

The dry–hot–windy climate frequently occurs during the grain-filling stage of winter wheat on the North China Plain (NCP) and thus negatively influences wheat yield. Sprinkler irrigation can improve field temperature and humidity and can be used to mitigate dry–hot–windy climate disasters. A two-season field experiment was carried out on the NCP to test how sprinkler irrigation influences the microclimate, canopy temperature and photosynthetic traits, as well as the grain-filling process and final grain yield, when spraying 1.5–2 mm of water on dry–hot–windy days. Field experiments revealed that, compared with the no-spraying treatment, spraying with 2 mm of water each time caused the air and canopy temperatures to decrease by 2.3–7.6 °C and 4.3–9.9 °C, respectively, during and just after spraying stopped, and the temperatures returned to their previous levels approximately one hour after spraying. The air humidity increased by up to 10% during and after spraying. The photosynthesis and transpiration rates and the stomatal conductivity after spraying increased by 34–235%, 15–55% and 24–79%, respectively. The linear relationships between photosynthesis rates and transpiration rates with respect to stomatal conductivity suggest that increases in both photosynthesis and transpiration rates are the main contributors to the increase in stomatal conductivity, which is due mainly to the improved canopy temperature and humidity conditions caused by spraying practices. The grain-filling process was improved by spraying, which ultimately increased the unit grain mass by approximately 5%. One spraying event on a dry–hot–windy day influenced the field microclimate and canopy photosynthetic traits for 90 min (30 min in spraying time + 60 min after spraying). When the intensity of the dry–hot–windy climate is strong, two spraying events can be applied. Spraying 2–2.5 mm of water each time was sufficient when the leaf area index was 4–5 during the grain-filling stage of winter wheat. Spray events can have a slight effect on grain yield when a dry–hot–windy climate occurs within the last five days before harvest.

Comparative Proteomic Analysis Provides New Insights into Improved Grain-filling in Ratoon Season Rice

Grain-filling of rice spikelets (particularly for the later flowering inferior spikelets) is an important characteristic that affects both quality and yield. Rice ratooning technology is used to cultivate a second crop from dormant buds that sprout from stubble left after the first harvest. This study used two rice varieties, the conventional indica rice ‘Jinhui 809’ and the hybrid indica-japonica rice ‘Yongyou 1540’, to assess the impact of rice ratooning on grain-filling. The results indicated that the grain-filling process in inferior spikelets of ratoon season rice (ISR) showed significant improvement compared to inferior spikelets of main crop (late season) rice (ISL). This improvement was evident in the earlier onset of rapid grain-filling, higher seed-setting percentage, and improved grain quality. A label-free quantitative proteomic analysis using mass spectrometry identified 1724 proteins with significant abundance changes, shedding light on the molecular mechanisms behind the improved grain-filling in ISR. The functional analysis of these proteins indicated that ratooning stimulated the metabolic processes of sucrose-starch, trehalose, and hormones in rice inferior spikelets, leading to enhanced enzyme activities related to starch synthesis, elevated concentrations of trehalose-6-phosphate (T6P), indole-3-acetic acid (IAA) and zeatin riboside (ZR) during the active grain-filling phase. This research highlighted the importance of the GF14f protein as a key regulator in the grain-filling process of ISR. It revealed that GF14f transcriptional and protein levels declined more rapidly in ISR compared to ISL during grain-filling. Additionally, the GF14f-RNAi plants specific to the endosperm exhibited improved quality in inferior spikelets. These findings suggest that the enhancement of starch synthesis, increased levels of IAA, ZR, and T6P, along with the rapid decrease in GF14f protein, play a role in enhancing grain-filling in ratoon season rice.

Ovary morphology determines ovary-to-grain transition process and final grain weight potential in wheat

The ovary-to-grain transition process is crucial for individual grain weight potential, but the but the physiological regulation of this highly dynamic and complex developmental process remains largely unknown unknown. Here, we performed a high temporal-resolution analysis of the proximal (large) and distal (small) ovaries/grains collected at an interval of 3 days from the booting stage to maturity stage. During grain-filling process, proximal grains always maintained a greater dry matter (0–36 days after anthesis, DAA), water (0–33 DAA), sugar (3–33 DAA), protein (6–36 DAA), and starch (amylose and amylopectin, 18–36 DAA) content, and larger volume (-15–36 DAA) than distal grains, but their partition or concentration did not differ between the proximal and distal grains. This result suggested that the capability of proximal and distal grains to produce water, sugar, protein, and starch within the same volume was similar; thus, grain sink (i.e. volume) was the cause in determinant of grain weight potential. In fact, the proximal ovary had a larger volume and related parameters (length, width and thickness) than the distal ovary before anthesis stage. in addition, the correlation coefficients of length and width with volume are higher than the correlation coefficients of thickness with volume. Clearly, we discovered a dynamic physiological mechanism for high proximal grain weight: the rapid elongation and widening of the proximal ovary improved its size, which passed to the proximal grain a volume advantage in the following ovary-grain transition, which allowed it to took up more sucrose and then converted into more starch and protein, improving dry matter accumulation and increasing proximal grain weight. Our findings provide a precise strategy for breeding and cultivation to increase individual grain weight potential by improving ovary volume.

Cadmium accumulation dynamics in the rice endosperm during grain filling revealed by autoradiography.

Cadmium (Cd) is one of the environmental pollutants contaminated in our food. Several previous reports showed that rice polishing cannot be efficient to reduce Cd content in white rice, implying the characteristic Cd distribution in rice grain. However, Cd distribution has not been fully elucidated so far. Herein, 109Cd radiotracer experiment was performed using the rice seedlings at various time points after flowering to obtain autoradiographs of the brown rice to visually understand the Cd transport and distribution during the grain-filling process. It was shown that 109Cd accumulated in the outermost area of the brown rice, and also in the middle part of the starchy endosperm, resulting in the appearance of the double circle distribution pattern, which was not observed in the autoradiographs of 65Zn. The inner circle of 109Cd located around the center of the endosperm was developed particularly at around 8 and 10 days after flowering. After this period, 109Cd started to deposit at the outer part of the endosperm, which was also found in the autoradiograph of 14C-sucrose. Considering the physiology of grain development, the contribution of water transport and protein synthesis in the endosperm on the characteristic Cd distribution pattern was hypothesized.

Modeling Spring Maize Grain Filling under Film Mulching and Nitrogen Application in a Cold and Arid Environment

The grain-filling process is a key stage in ensuring a high yield of maize. Nitrogen is one of the nutrient elements most essential for maize, especially in cold and arid areas. To evaluate the effects of plastic-film mulching and nitrogen application on the maize grain-filling process, the impact of different plastic-film mulching (degradable plastic film, J; common plastic-film mulching, P) and nitrogen fertilizer levels (0 kg·ha−1, N0; 160 kg·ha−1, N1; 320 kg·ha−1, N2; 480 kg·ha−1, N3) on maize grain-filling characteristic parameters and final 100-kernel weight were tested in 2021 and 2022. The results showed that the interaction between film mulching and nitrogen application significantly (p < 0.05) affected the filling characteristic parameters and final 100-kernel weight of maize. The final 100-kernel weight was highest at the N2 nitrogen application level, which was 7.69–38.13% higher under degradable plastic-film mulching and 3.17–38.06% higher under common plastic-film mulching than at other levels. The nitrogen application level significantly (p < 0.05) increased grain-filling duration and rate. The duration time in reaching the maximum grain-filling rate under the N2 nitrogen application level was around 1.1967–5.7835 d under degradable plastic-film mulching and 2.8688–8.1704 d under the common plastic-film mulching, with the maximum and average grain-filling rate increased by 0.0595–0.2063 g·d−1 and 0.0447–0.1423 g·d−1 under degradable film mulching and 0.1418–0.3058 g·d−1 and 0.1082–0.2125 g·d−1 under common film mulching, respectively. The nitrogen application levels of N2 and N3 under two plastic-film mulching methods prolonged the duration of the rapid and slow increase period of grain filling and increased the grain-filling rate and the average rate. The average grain-filling rate at the N2 level increased by 0.0469–0.1759 g·d−1 and 0.0090–0.0454 g·d−1 under degradable film mulching and 0.1113–0.2581 g·d−1 and 0.0203–0.0648 g·d−1 under common film mulching, respectively. Therefore, common plastic film mainly prolonged the duration of the gradual increase period of grain filling and increased the grain-filling rate; meanwhile, the effect of degraded plastic film on the grain-filling rate increase and prolonging of the grain-filling duration was gradually highlighted during the rapid and the slow period of increase. In addition, the 320 kg·ha−1 of nitrogen application level under both common plastic-film mulching and degradable-film mulching was more conducive to prolonging the grain-filling duration of maize, which increased the grain-filling rate and 100-kernel weight, laying a foundation for a high yield of maize.

Cell-type proteomic and metabolomic resolution of early and late grain filling stages of wheat endosperm.

The nutritional value of wheat grains, particularly their protein and metabolite composition, is a result of the grain-filling process, especially in the endosperm. Here, we employ laser microdissection (LMD) combined with shotgun proteomics and metabolomics to generate a cell type-specific proteome and metabolome inventory of developing wheat endosperm at the early (15 DAA) and late (26 DAA) grain-filling stages. We identified 1803 proteins and 41 metabolites from four different cell types (aleurone (AL), sub-aleurone (SA), starchy endosperm (SE) and endosperm transfer cells (ETCs). Differentially expressed proteins were detected, 67 in the AL, 31 in the SA, 27 in the SE and 50 in the ETCs between these two-time points. Cell-type accumulation of specific SUT and GLUT transporters, sucrose converting and starch biosynthesis enzymes correlate well with the respective sugar metabolites, suggesting sugar upload and starch accumulation via nucellar projection and ETC at 15 DAA in contrast to the later stage at 26 DAA. Changes in various protein levels between AL, SA and ETC support this metabolic switch from 15 to 26 DAA. The distinct spatial and temporal abundances of proteins and metabolites revealed a contrasting activity of nitrogen assimilation pathways, e.g. for GOGAT, GDH and glutamic acid, in the different cell types from 15 to 26 DAA, which can be correlated with specific protein accumulation in the endosperm. The integration of cell-type specific proteome and metabolome data revealed a complex metabolic interplay of the different cell types and a functional switch during grain development and grain-filling processes.

Proteomics Analysis Reveals Hormone Metabolic Process Involved in the Regulation of Kernel Water Content Induced by Exogenous Abscisic Acid in Maize

The water content of maize kernels during harvest is a critical factor influencing grain harvest practices globally. Abscisic acid (ABA) plays a pivotal role in grain development during the grain-filling process. Yet, there has been limited reporting on the regulatory mechanism of grain dehydration induced by exogenous ABA using proteomic techniques. In this study, two maize genotypes with distinct dehydration rates, DK517 (fast dehydration) and ZD1002 (slow dehydration), were treated with ABA after the heading stage. Results revealed a 20% lower yield in DK517 compared to ZD1002 following ABA application. Sixty days after pollination, the grain water content decreased to 23.55% in DK517 and 30.42% in ZD1002 due to ABA treatment. Through proteomic analysis, 861 and 118 differentially expressed proteins (DAPs) were identified in DK517 and ZD1002, respectively, as a result of ABA treatment. GO analysis indicated that the primary metabolic process, nitrogen compound metabolic process, and hormone metabolic process were significantly enriched among the DAPs in DK517 induced by ABA, while these pathways were absent in ZD1002. Twenty-four and fifteen overlapping DAPs showed contrasting responses in the two maize genotypes after ABA treatment. Notably, the expression levels of six known ABA signaling genes, including SnRK2 and DRE-like proteins, were downregulated in DK517 but remained unaltered in ZD1002 following ABA application. These findings underscore the distinct effects of exogenous ABA on the grain-filling characteristics of different maize genotypes, emphasizing the importance of the hormone metabolic process in regulating kernel water content induced by exogenous abscisic acid in maize.

Mixture of controlled-release and normal urea to improve maize root development, post-silking plant growth, and grain filling

The mixture of controlled-release urea (CRU) and normal urea (MCU) applied as one-time basal fertilizer is a convenient and effective alternative to traditional split-nitrogen (N) fertilization, can ensure a sufficient late-season N supply to increase maize yield. However, the effects of MCU ratios on maize root development, post-silking growth, and grain-filling process remain poorly understood. In this study, 3-year field experiments were conducted on sandy and clay soils in Northeast China, to evaluate maize yield responses to different MCU ratios (from 0% to 60% at 15% intervals). Four key treatments, i.e., N omission (N0), MCU0%, MCU30%, and MCU60%, were then selected to investigate root traits, post-silking plant growth and N uptake, grain-filling parameters, and their relationships with grain yields. Across different soils and years, grain yields showed a parabolic curve with increasing MCU ratios, with the highest yields obtained in MCU30%. On average, MCU30% increased grain yield by 22.3% and 11.7% on sandy and clay soils, respectively, relative to MCU0%. The appropriate early-N supply in MCU30% promoted root growth by allocating more dry matter (DM) to roots, while increasing total root length by producing more and longer crown roots, as well as higher lateral root length. The well-developed roots in MCU30% increased post-silking plant N uptake under sufficient late-N supply, thereby delayed leaf senescence and improved DM production for grain-filling, ultimately increased kernel weight and grain yield. Compared to MCU30%, MCU60% showed similar growth and yield performances on clay soil. In contrast, MCU60% performed notably worse on sandy soil due to limited CRU-N release at early period under inherently lower soil moisture and fertility levels. Our measurements and correlation analysis support the conclusion that MCU30% effectively sustain leaf longevity and increase post-silking DM by optimizing root growth and morphology under an optimal N supply pattern during maize growing season, thus improving grain-filling and final yield. The results advance our understanding of how MCU method affects maize post-silking growth and yield formation, providing important insights for optimizing crop N management by regulating root development, especially on lower fertility soils.

Effect of chemical regulators on the recovery of leaf physiology, dry matter accumulation and translocation, and yield-related characteristics in winter wheat following dry-hot wind

Dry-hot wind stress causes losses in wheat productivity in major growing regions worldwide, especially winter wheat in the Huang-Huai-Hai Plain of China, and both the occurrence and severity of such events are likely to increase with global climate change. To investigate the recovery of physiological functions and yield formation using a new non-commercial chemical regulator (NCR) following dry-hot wind stress, we conducted a three-year field experiment (2018–2021) with sprayed treatments of tap water (control), monopotassium phosphate (CKP), NCR at both the jointing and flowering stages (CFS), and NCR only at the jointing stage (FSJ) or flowering stage (FSF). The leaf physiology, biomass accumulation and translocation, grain-filling process, and yield components in winter wheat were assessed. Among the single spraying treatments, the FSJ treatment was beneficial for the accumulation of dry matter before anthesis, as well as larger increases in the maximum grain-filling rate and mean grain-filling rate. The FSF treatment performed better in maintaining a high relative chlorophyll content as indicated by the SPAD value, and a low rate of excised leaf water loss in flag leaves, promoting dry matter accumulation and the contribution to grain after anthesis, prolonging the duration of grain filling, and causing the period until the maximum grain-filling rate reached earlier. The CFS treatment was better than any other treatments in relieving the effects of dry-hot wind. The exogenous NCR treatments significantly increased grain yields by 12.45–18.20% in 2018–2019, 8.89–13.82% in 2019–2020, and 8.10–9.00% in 2020–2021. The conventional measure of the CKP treatment only increased grain yield by 6.69% in 2020–2021. The CFS treatment had the greatest mitigating effect on yield loss under dry-hot wind stress, followed by the FSF and FSJ treatments, and the CKP treatment only had a minimal effect. In summary, the CFS treatment could be used as the main chemical control measure for wheat stress resistance and yield stability in areas with a high incidence of dry-hot wind. This treatment can effectively regulate green retention and the water status of leaves, promote dry matter accumulation and efficient translocation, improve the grain-filling process, and ultimately reduce yield losses.

Meta-QTL and haplo-pheno analysis reveal superior haplotype combinations associated with low grain chalkiness under high temperature in rice.

Chalk, an undesirable grain quality trait in rice, is primarily formed due to high temperatures during the grain-filling process. Owing to the disordered starch granule structure, air spaces and low amylose content, chalky grains are easily breakable during milling thereby lowering head rice recovery and its market price. Availability of multiple QTLs associated with grain chalkiness and associated attributes, provided us an opportunity to perform a meta-analysis and identify candidate genes and their alleles contributing to enhanced grain quality. From the 403 previously reported QTLs, 64 Meta-QTLs encompassing 5262 non-redundant genes were identified. MQTL analysis reduced the genetic and physical intervals and nearly 73% meta-QTLs were narrower than 5cM and 2Mb, revealing the hotspot genomic regions. By investigating expression profiles of 5262 genes in previously published datasets, 49 candidate genes were shortlisted on the basis of their differential regulation in at least two of the datasets. We identified non-synonymous allelic variations and haplotypes in 39 candidate genes across the 3K rice genome panel. Further, we phenotyped a subset panel of 60 rice accessions by exposing them to high temperature stress under natural field conditions over two Rabi cropping seasons. Haplo-pheno analysis uncovered haplotype combinations of two starch synthesis genes, GBSSI and SSIIa, significantly contributing towards the formation of grain chalk in rice. We, therefore, report not only markers and pre-breeding material, but also propose superior haplotype combinations which can be introduced using either marker-assisted breeding or CRISPR-Cas based prime editing to generate elite rice varieties with low grain chalkiness and high HRY traits.

High nitrogen input increases the total spikelets but decreases the high-density grain content in hybrid indica rice

Nitrogen (N) application strongly affects both the total spikelets and grain weight in rice ( Oryza sativa L.), thereby affecting grain yield. Grain weight is closely related to the grain-filling process after the heading stage, and can be regarded as a combination of grain size and grain density (GD). However, there is a lack of information about the response of GD in rice to N. Here, we examined in a lager panicle hybrid indica rice at two field experimental sites the responses of grain traits (including GD), grain yield, and yield components to various N treatments and their relationships with each other. In this study, the grains with six GD ranges were fractionated into the light grain (1.00 g ml −1 ≤ GD < 1.15 g ml −1 ) and heavy grain or high-density grain (GD ≥ 1.15 g ml −1 ). High N application increased the total spikelets m −2 , but did not result in high grain yield due to reduced grain weight (seed-setting rate and 1000-grain weight). Reduction of the 1000-grain weight under high N was related to the decrease in grain volume and high-density grain content (the ratio of the weights of high-density grains to the total grains weight). As N application increased from 0 to 225 kg ha −1 , on average, the high-density grain content decreased by 31.93 %, from 78.21 % to 53.24 %. Grain plumpness and GD were the main factors affecting grain weight. GD was more important to the grain weight when grain size was smaller, and plumpness degree and GD were both crucial for grain weight when grain volume was larger. Compared with light grains, heavy grains had higher amylose content and lower crude protein content. These results indicated that the constraint and compensation relationship between spikelet number and grain weight in rice was also reflected in the equilibrium between grain size and GD. Although high N input in rice production increased the total spikelets m −2 , high N input decreased the grain volume, especially the high-density grain content. • High nitrogen application reduced the high-density (≥ 1.15 g ml −1 ) grain content. • Rice quality of heavy grain was different from that of light grain. • For larger-volume grain, both plumpness and density affected grain weight. • There were constraint and compensation between grain size and grain density.

Effects of post-silking drought stress degree on grain yield and quality of waxy maize.

Drought stress (DS) induced by post-silking have a major impact on the yield and quality of maize. In this study, the effects of different degrees of DS after pollination on grain filling, starch and protein metabolism, and functional properties were investigated using two waxy maize cultivars as materials. The levels of DS that were investigated were 'mild water stress' (WS1), 'moderate water stressed' (WS2), and 'severewaterstressed' (WS3). Drought stressdecreased grain fresh weight, dry weight, and moisture content in both cultivars during grain filling, and reduced kernel number, kernel weight, and grain yield at maturity. The effect on grain development and yield formation gradually increased with drought aggravation. The water stress (WS) treatment downregulated the enzymatic activities related to starch biosynthesis during grain-filling process, accompanied by a decrease in soluble sugar and starch deposition. The WS treatment increased the enzymatic activities involved in protein synthesis during grain-filling process, thereby increasing the protein content of grains. On average, WS2 and WS3 treatments reduced the pasting viscosities and increased the gelatinization temperatures of grains, with WS3 having the greatest effect. However, the changes of setback viscosity, gelatinization enthalpy, retrogradation enthalpy, and retrogradation percentage under WS treatment were inconsistent in both cultivars. Pearson correlation analysis showed that starch content was negatively correlated with gelatinization temperatures and positively correlated with pasting viscosities in both cultivars. However, grain pasting and gelatinization propertieshave opposite correlations with protein content and starch content. These findings suggest that post-silking DS regulated the grain-filling process and starch and protein biosynthesis, which influenced grain yield and quality. © 2022 Society of Chemical Industry.

Research on Dynamic Monitoring of Grain Filling Process of Winter Wheat from Time-Series Planet Imageries

Remote sensing has been used as an important means of monitoring crop growth, especially for the monitoring of the formation of crop yield in the middle and late growth period. The information acquisition on the yield formation period of winter wheat is of great significance for winter wheat growth monitoring, yield estimation and scientific management. Hence, the main goal of this study was to verify the possibility of monitoring the grain-filling process of winter wheat and its in-field variability using an alternative non-destructive method based on orbital remote sensing. High-resolution satellite imageries (3 m) were obtained from the PlanetScope platform for three commercial winter wheat fields in Jiangsu Province, China during the reproductive stage of the winter wheat (185–215/193–223/194–224 days after sowing (DAS)). Based on the quantitative analysis of vegetation indices (VIs) obtained from high-resolution satellite imageries and three indicators of the winter wheat grain-filling process, linear, polynomial and logistic growth models were used to establish the relationship between VIs and the three indicators. The research showed a high Pearson correlation (p &lt; 0.001) between winter wheat maturity and most VIs. In the overall model, the remote sensing inversion of the dry thousand-grain weight has the highest accuracy and its R2 reaches more than 0.8, which is followed by fresh thousand-grain weight and water content, the accuracies of which are also considerable. The results indicated a great potential to use high-resolution satellite imageries to monitor winter wheat maturity variability in fields and subfields. In addition, the proposed method contributes to monitoring the dynamic spatio-temporality of the grain-filling progression, allowing for more accurate management strategies in regard to winter wheat.

Climate change effects on bread wheat phenology and grain quality: A case study in the north of Italy.

Increasing temperatures, heat waves, and reduction of annual precipitation are all the expressions of climate change (CC), strongly affecting bread wheat (Triticum aestivum L.) grain yield in Southern Europe. Being temperature the major driving force of plants’ phenological development, these variations also have effects on wheat phenology, with possible consequences on grain quality, and gluten protein accumulation. Here, through a case study in the Bolognese Plain (North of Italy), we assessed the effects of CC in the area, the impacts on bread wheat phenological development, and the consequences on grain gluten quality. The increasing trend in mean annual air temperature in the area since 1952 was significant, with a breakpoint identified in 1989, rising from 12.7 to 14.1°C, accompanied by the signals of increasing aridity, i.e., increase in water table depth. Bread wheat phenological development was compared in two 15-year periods before and after the breakpoint, i.e., 1952–1966 (past period), and 2006–2020 (present period), the latest characterized by aridity and increased temperatures. A significant shortening of the chronological time necessary to reach the main phenological phases was observed for the present period compared to the past period, finally shortening the whole life cycle. This reduction, as well as the higher temperature regime, affected gluten accumulation during the grain-filling process, as emerged analyzing gluten composition in grain samples of the same variety harvested in the area both before and after the breakpoint in temperature. In particular, the proportion of gluten polymers (i.e., gliadins, high and low molecular weight glutenins, and their ratio) showed a strong and significant correlation with cumulative growing degree days (CGDDs) accumulated during the grain filling. Higher CGDD values during the period, typical of CC in Southern Europe, accounting for higher temperature and faster grain filling, correlated with gliadins, high molecular weight glutenins, and their proportion with low molecular weight glutenins. In summary, herein reported, data might contribute to assessing the effects of CC on wheat phenology and quality, representing a tool for both predictive purposes and decision supporting systems for farmers, as well as can guide future breeding choices for varietal innovation.

The exogenous GA3 greatly affected the grain-filling process of semi-dwarf gene Rht4 in bread wheat.

Rht4 is characterized as a GA-responsive dwarf gene in bread wheat (Triticum aestivum L.). The responsiveness of Rht4 to exogenous GA3 was characterized in seedlings, but the effects of exogenous GA3 on the important morphological and agronomic traits such as plant height, grain-filling rate, and yield components are unclear. In this study, the Rht4 responsiveness of exogenous GA3 on these traits was evaluated using the homozygous F4:5 and F5:6 lines derived from a cross between Jinmai47 and Burt ert937 (Rht4 donor). After exogenous GA3 application, the plant height of the dwarf lines was, on average, increased by 17.54%, about 7.92% more than that of the tall lines. Compared with the tall lines, application of exogenous GA3 significantly increased the kernel weight, maximum grain-filling rate (Gmax), average grain-filling rate (Gave) and kernel weight increment achieving Gmax (Wmax) in both superior and inferior grains, while the day on which the maximum grain-filling rate was reached (Tmax) in Rht4 dwarf lines was significantly earlier in the two generations. What is more, the grain number spike-1 , grain yield plant-1 , and 1000-kernel weight (TKW) of the dwarf lines notably increased after exogenous GA3 -treatment, while there was no significant change in the tall lines except for TKW. The quality traits of the dwarf lines with GA3 -treatment were greatly improved. Taken together, these results suggested that the application of GA3 could improve the grain-filling process of Rht4 and compensate for some negative influences, which may provide a reference for its application in wheat breeding and promote the characterization of its regulatory mechanisms.

Genome-wide identification, phylogenetic and expression pattern analysis of MADS-box family genes in foxtail millet (Setaria italica)

Foxtail millet (Setaria italica) is rich in nutrients and extremely beneficial to human health. We identified and comprehensively analyzed 89 MADS-box genes in the foxtail millet genome. According to the classification of MADS-box genes in Arabidopsis thaliana and rice, the SiMADS-box genes were divided into M-type (37) and MIKC-type (52). During evolution, the differentiation of MIKC-type MADS-box genes occurred before that of monocotyledons and dicotyledons. The SiMADS-box gene structure has undergone much differentiation, and the number of introns in the MIKC-type subfamily is much greater than that in the M-type subfamily. Analysis of gene duplication events revealed that MIKC-type MADS-box gene segmental duplication accounted for the vast majority of gene duplication events, and MIKC-type MADS-box genes played a major role in the amplification of SiMADS-box genes. Collinearity analysis showed highest collinearity between foxtail millet and maize MADS-box genes. Analysis of tissue-specific expression showed that SiMADS-box genes are highly expressed throughout the grain-filling process. Expression analysis of SiMADS-box genes under eight different abiotic stresses revealed many stress-tolerant genes, with induced expression of SiMADS33 and SiMADS78 under various stresses warranting further attention. Further, some SiMADS-box proteins may interact under external stress. This study provides insights for MADS-box gene mining and molecular breeding of foxtail millet in the future.

Adaptability Mechanisms of Japonica Rice Based on the Comparative Temperature Conditions of Harbin and Qiqihar, Heilongjiang Province of Northeast China

Japonica rice has been considerably impacted from climate change, mainly regarding temperature variations. Adjusting the crop management practices based on the assessment of adaptability mechanisms to take full advantage of climate resources during the growing season is an important technique for japonica rice adaptation to climate changed conditions. Research based on the adaptability mechanisms of japonica rice to temperature and other environmental variables has theoretical and practical significance to constitute a theoretical foundation for sustainable japonica rice production system. A contrived study was arranged with method of replacing time with space having four different japonica cultivars namely Longdao-18, Longdao-21, Longjing-21, and Suijing-18, and carried out in Harbin and Qiqihar during the years 2017–2019 to confer with the adaptability mechanisms in terms of growth, yield and quality. The formation of the grain-filling material for superior and inferior grains was mainly in the middle phase which shared nearly 60% of whole grain-filling process. Maximum yield was noticed in Longdao-18 at Harbin and Qiqihar which was 9500 and 13,250 kg/ha, respectively. The yield contributing components fertile tillers, number of grains per panicle, and 1000-grain weight were higher at Qiqihar; therefore, there was more potential to get higher yield. The data for grain-filling components demonstrated that the filling intensity and duration at Qiqihar was contributive to increase the grain yield, whereas the limiting agents to limit yield at Harbin were the dry weights of inferior grains. The varietal differences in duration and time of day of anthesis were small. Across all cultivars and both study sites, nearly 85% of the variation of the maximum time of anthesis could be justified with mean atmospheric temperature especially mean minimum temperature. Mean onset of anthesis was earliest in Longdao-21 at Harbin, whereas it was latest in Longdao-18 at Qiqihar. The maximum time to end anthesis and the longest duration of anthesis were taken by Longdao-18, i.e., 9.0 hasr and 4.2 h, respectively. Chalkiness and brown rice percentages were elevated at Qiqihar showing Harbin produced good quality rice. This study investigated the adaptability mechanisms of japonica rice under varying temperature conditions to distinguish the stress tolerance features for future sustainability and profitability in NEC. It was concluded that there is an adaptive value for anthesis especially regarding Tmin and, moreover, earlier transplantation may produce tall plants. The results demonstrated that high temperature at the onset of anthesis at the start of the day enhanced the escape from high temperature later during the day. Early transplantation is recommended in NEC because earlier anthesis during humid days rendered for potential escape from high ambient temperature later during that day. Temperature influenced japonica rice significantly and coherently, whereas the influence of growing season precipitation was not significant. Daily mean sunshine influenced the japonica rice significantly, but the impact was less spatially coherent. The results foregrounded the response of the japonica rice to external driving factors focusing climate, but ignored socioeconomic suggesting emphasis on both driving factors to target future research and render important insights into how japonica rice can adapt in mid-high-latitude regions.

Effects of High Temperature on Rice Grain Development and Quality Formation Based on Proteomics Comparative Analysis Under Field Warming.

With the intensification of global warming, rice production is facing new challenges. Field evidence indicates that elevated temperature during rice grain-filling leads to the further deterioration of grain quality. In order to clarify the potential regulatory mechanism of elevated temperature on the formation of rice quality, the DIA mass spectrometry method under the background of field warming was conducted to investigate the regulatory effects of high temperature on grain development and material accumulation pathways. The results showed that a total of 840 differentially expressed proteins were identified during the grain-filling process under elevated temperature. These differentially expressed proteins participated in carbon metabolism, amino acid biosynthesis, signal transduction, protein synthesis, and alternately affected the material accumulation of rice grains. The significant up-regulation of PPROL 14E, PSB28, granule-bound starch synthase I, and the significant down-regulation of 26.7 kDa heat shock protein would lead to the component difference in grain starch and storage proteins, and that could be responsible for the degradation of rice quality under elevated temperature. Results suggested that proteins specifically expressed under elevated temperature could be the key candidates for elucidating the potential regulatory mechanism of warming on rice development and quality formation. In-depth study on the metabolism of storage compounds would be contributed in further proposing high-quality cultivation control measures suitable for climate warming.

Effects of different plastic film mulching on soil hydrothermal conditions and grain-filling process in an arid irrigation district

Plastic film mulching has been extensively used for spring maize (Zea mays L.) production in the Hetao Irrigation District (HID). Determining whether transparent plastic film mulching results in premature senescence and yield reduction of spring maize still needs to be verified. A two-year field experiment was conducted in the HID that involved planting spring maize under three mulching practices on a flat plot 1) without mulching (control treatment, CK), 2) with black plastic film mulching (BM), 3) with transparent plastic film mulching (TM). The results indicated that TM and BM were superior to CK in terms of effects on soil hydrothermal conditions. Compared with BM, TM produced significantly higher soil temperature at V6, and had no significant temperature effect at V12, R1, R3, and R6. Both TM and BM promoted early seedling emergence and earlier silking, and TM extended the duration of the reproductive stages by 1–2 days compared with BM, and 4–5 days longer than CK. TM and BM produced greater kernel weights and kernel volumes in the superior and middle portions of the ear than CK. TM produced significantly greater total kernel weights per ear than BM at and after 23 days after silking. TM significantly increased grain-filling rate and length of the active grain-filling period compared with BM and CK. Additionally, TM and BM produced significantly higher photosynthetic parameters than CK at the grain-filling stage in the two study years. The net photosynthesis rate for TM was significantly greater than for BM. TM and BM significantly increased grain yields by 28.1% and 15.1%, respectively, in 2019 over CK, and by 24.6% and 21.1% in 2020. Transparent plastic film mulching could serve as a promising adaptive management practice to increase resource use efficiency and to improve maize productivity in the HID.