Good Stability Research Articles

Temperature dependent Raman spectroscopy and sensing performance of 2D black phosphorus.

Temperature is an important parameter to be monitored in new wearable electronic devices. Layered black phosphorus (BP) has inherent good thermal stability and semiconductor properties and has a promising application as a temperature sensing layer. Here, we investigate the temperature sensing properties of BP, using in situ Raman spectroscopy and x-ray diffraction techniques. Flexible sensors are constructed, and temperature response is investigated in the range of 6-38 °C. The prospect application for monitoring the temperature of human body parts is demonstrated. The results show that the BP-based temperature sensors demonstrate good negative temperature coefficient characteristics and display high sensitivity and reproducible sensing performance. The temperature-dependent performance suggests the feasibility of BP as a sensitive layer in a wide temperature range. This work paves the way for exploring new applications of amazing layered materials, such as BP, in wearable electronic devices.

Thermally and Mechanically Stable Perovskite Artificial Synapse as Tuned by Phase Engineering for Efferent Neuromuscular Control.

The doping of perovskites with mixed cations and mixed halides is an effective strategy to optimize phase stability. In this study, we introduce a cubic black phase perovskite CsyFA(1-y)Pb(BrxI(1-x))3 artificial synapse, using phase engineering by adjusting the cesium-bromide content. Low-bromine mixed perovskites are suitable to improve the electric pulse excitation sensitivity and stability of the device. Specifically, the low-bromine and low-cesium mixed perovskite (x = 0.15, y = 0.22) annealed at 373 K allows the device to maintain logic response even after 1000 mechanical flex/flat cycles. The device also shows good thermal stability up to temperatures of 333 K. We have demonstrated reflex-arc behavior with MCMHP synaptic units, capable of making sensory warnings at high frequency. This compositionally engineered, dual-mixed perovskite synaptic device provides significant potential for perceptual soft neurorobotic systems and prostheses.

Paclitaxel-loaded elastic liposomes synthesised by microfluidics technique for enhance transdermal delivery.

The inherent flexibility of elastic liposomes (EL) allows them to penetrate the small skin pores and reach the dermal region, making them an optimum candidate for topical drug delivery. Loading chemotherapy in ELs could improve chemotherapy's topical delivery and localise its effect on skin carcinogenic tissues. Chemotherapy-loaded EL can overcome the limitations of conventional administration of chemotherapies and control the distribution to specific areas of the skin. In the current studies, Paclitaxel was utilised to develop Paclitaxel-loaded EL. As an alternative to the conventional manufacturing methods of EL, this study is one of the novel investigations utilising microfluidic systems to examine the potential to enhance and optimise the quality of Els by the microfluidics method. The primary aim was to achieve EL with a size of < 200nm, high homogeneity, high encapsulation efficiency, and good stability. A phospholipid (DOPC) combined with neutral and anionic edge activators (Tween 80 and sodium taurocholate hydrate) at various lipid-to-edge activator ratios, was used for the manufacturing of the ELs. A preliminary study was performed to study the size, polydispersity (PDI), and stability to determine the optimum microfluidic parameters and lipid-to-edge activator for paclitaxel encapsulation. Furthermore, physiochemical characterisation was performed on the optimised Paclitaxel-loaded EL using a variety of methods, including Dynamic Light Scattering, Fourier Transform Infrared Spectroscopy, Atomic force microscopy, elasticity, encapsulation efficiency, and In vitro release. The results reveal the microfluidics' significant impact in enhancing the EL characteristics of EL, especially small and controllable size, Low PDI, and high encapsulation efficiency. Moreover, the edge activator type and concentration highly affect the EL characteristics. The Tween 80 formulations with optimised concentration provide the most suitable size and higher encapsulation efficiency. The release profile of the formulations showed more immediate release from the EL with higher edge activator concentration and a higher % of the released dug from the Tween 80 formulations.

Realizing the Efficient Dissolution of Drag Reducer upon pH-Induced Demulsification of Inverse Polymer Emulsion.

The increasing exploitation of fossil resources needs to shift people's attention to developing unconventional reservoir resources. Polyacrylamide-based emulsion drag reducers can effectively reduce the turbulence of fracturing fluid and improve oil recovery, but their release effect is poor, which limits their practical application. Here, we constructed a pH-responsive inverse polymer emulsion of poly(acrylamide-2-acrylamido-2-methylpropanesulfonic acid). Interestingly, HOA/Tween 80 exhibits remarkable pH-responsive behavior, which enables the monomer emulsion to change the type of emulsion under pH stimulation. Our results propose that the P(AM-AMPS) polymer emulsion is eluted with the same aqueous phase as the W/O P(AM-AMPS) polymer emulsion, thereby achieving the effect of drag reduction. P(AM-AMPS) can be rapidly released from the inverse polymer emulsion within 70 s upon pH stimulation, the drag reduction rate of which was 60.4%. Obviously, the inverse polymer emulsion prepared by a pH-responsive surfactant not only has good stability but also can achieve rapid release of the polymer upon pH stimulation, which supplies an interesting indication to explain why a balance exists between the stability of the emulsion and release of P(AM-AMPS).

Conformal sulfidation of HKUST-1 for constructing porous Cu2S/CuO octahedrons realizing highly sensitive non-enzymatic glucose detection.

Metal-organic frameworks (MOFs) are believed to be promising precursors for constructing novel and efficient catalysts for glucose sensing. Herein, HKUST-1 precursors are first fabricated using a one-pot hydrothermal approach, and then HKUST-1 is converted into porous Cu2S/CuO octahedrons through conformal sulfidation with the help of OH- ions. The as-obtained Cu2S/CuO composite can provide rich electrochemical active sites and promoted electric transfer kinetics. Benefiting from these combined merits, the as-fabricated Cu2S/CuO composite is confirmed to be a high-performance catalyst, with high sensitivities of 8269.45 and 4140.82 A mM-1 cm-2 in the corresponding ranges of 0.05~0.6 mM and 0.6~1.2 mM, respectively. Moreover, the as-prepared electrode materials possess good anti-interference ability, reproducibility and long-term stability. This work opens up new avenues for the design and preparation of transition metal sulfide composites.

High-pressure effects on the electronic properties and photoluminescence of Ag-doped CsCu2I3.

CsCu2I3 is a popular lead-free metal halide perovskite with good thermal and air stability. To facilitate its applications in optoelectronics, Ag doping and high pressure are employed in this work to improve the optoelectronic properties of CsCu2I3. Using first-principles calculations and experiments, the structural phase change of 10% Ag-doped CsCu2I3 is found to occur at about 4.0 GPa. This reveals the regulation of band structures by hydrostatic pressure. In addition, the high pressure not only increases the emission energy of photoluminescence of 10% Ag-doped CsCu2I3 by more than 0.2 eV, but also increases the emission intensity by multiple times. Finally, the origin of luminescence in 10% Ag-doped CsCu2I3 is attributed to the I vacancies. This work provides insight into the structure and optoelectronic properties of 10% Ag-doped CsCu2I3, and offers significant guidance for the design and manufacturing of future luminescence devices.

Comparative analysis of KXH3(X= Mg, be) hydride cubic perovskites for hydrogen storage properties: A computational approach

The burgeoning potential of hydrogen as a future clean energy source has spurred intense research into hydrogen storage solutions. Novel hydride perovskite materials aside metal hydride are at the forefront of this effort, engaging researchers worldwide. This study utilizes Ab-initio calculations based on density functional theory (DFT) implemented in VASP to compare the electrical, elastic, thermodynamic, and optical properties of cubic KXH3 (X = Mg, Be) compounds. Generalized gradient approximation (GGA) with the Perdew-Burke-Ernzrhof (PBE) scheme is employed for optimization. Our calculations agree well with previously reported results. However, the tolerance factor suggests KBeH3 may not be stable in the cubic form. The electronic structure reveals KMgH3 to be semiconductive, while KBeH3 exhibits metallic behavior. Both compounds exhibit mechanical stability within the study. Optical properties are also investigated, showing suitability for hydrogen storage in the low energy range. Additionally, the mechanical parameters satisfy the Born stability criterion, indicating good mechanical stability for both compounds. Finally, the gravimetric ratios for hydrogen storage are calculated as 5.86 wt% and 4.52 wt% for KMgH3 and KBeH3, respectively. These high values suggest both compounds hold significant promise for diverse renewable energy applications and long-term hydrogen fuel storage.

High Young's Modulus Li6.4La3Zr1.4Ta0.6O12-Based Solid Electrolyte Interphase Regulating Lithium Deposition for Dendrite-Free Lithium Metal Anode.

Artificial solid electrolyte interphase (SEI) layers have been widely regarded as an effective protection for lithium (Li) metal anodes. In this work, an artificial SEI film consisting of dense Li6.4La3Zr1.4Ta0.6O12 (LLZTO) nanoparticles and polymerized styrene butadiene rubber is designed, which has good mechanical and chemical stability to effectively prevent Li anode corrosion by the electrolyte. The LLZTO-based SEI film can not only guide Li to uniformly deposit at the interface but also accelerate the electrochemical reaction kinetics due to its high Li+ conductivity. In particular, the high Young's modulus of the LLZTO-based SEI will regulate e- distribution in the continuous Li plating/stripping process and achieve uniform deposition of Li. As a consequence, the Li anode with LLZTO-based SEI (Li@LLZTO) enables symmetric cells to demonstrate a stable overpotential of 25 mV for 600 h at a current density of 1 mA cm-2 for 1 mA h cm-2. The Li@LLZTO||LFP (LiFePO4) full cell exhibits a capacity of 106 mA h g-1 after 800 cycles at 5 C with retention as high as 90%. Our strategy here suggests that the artificial SEI with high Young's modulus effectively inhibits the formation of Li dendrites and provides some guidance for the design of higher performance Li metal batteries.

High-performance flexible asymmetric supercapacitor utilizing hierarchical NiCo2O4 nanosheets supported on porous carbonized Verbena leaves

This study employed three-dimensional porous carbon with high surface area as the conductive substrate for composite electrode materials, aiming to facilitate rapid charge transfer and ion diffusion to increase the specific capacitance of pseudo-capacitive materials. We employed an in-situ hydrothermal method to anchor NiCo2O4 onto the porous carbonized verbena leaves, yielding nanostructured VC@NiCo2O4-8 composite electrode materials. At a current density of 1.0 A g-1, VC@NiCo2O4-8 exhibited a high specific capacitance of up to 2061.8 F g−1 and remarkable cycling stability (with only 7.8 % capacitance loss after 10000 cycles). Additionally, we assembled VC@NiCo2O4-8//VC asymmetric all-solid-state flexible supercapacitors, attaining a significant energy density of 54.0 Wh kg−1 at a power density of 695 W kg−1, while maintaining good flexibility and stability. This study provides a simple and effective method for the design and construction of high-performance electrode materials for flexible energy storage devices.

Dynamic Directional Ultrasonically In Situ-Generated N,S-Codoped Carbon Dots in Poly(ethylene glycol) for Improved Tribological Performance.

The dispersion stability of nanomaterials in lubricants significantly influences tribological performance, yet their addition as lubricant additives often presents challenges in secondary dispersion. Here, we present a straightforward method for in situ preparation of N,S-codoped CDs (N,S-CDs)-based lubricants using heterocyclic aromatic hydrocarbons containing N/S elements in poly(ethylene glycol) (PEG) base oil by a directional ultrasound strategy. Two types of N,S-CDs were successfully prepared via the directional ultrasound treatment of PEG with benzothiazole (BTA) and benzothiadiazole (BTH) separately. The resultant N,S-CDs have a uniform distribution of N and S elements and maintain good colloidal dispersion stability in PEG even after 9 months of storage. The N,S-CDs can enter the surface gap of the friction pairs and then induce a tribochemical reaction. Benefiting from the synergistic effect of N and S activating elements, a robust and stable protective film consisting of iron sulfides, iron oxides, carbon nitrides, and amorphous carbonaceous compounds is formed, thus endowing N,S-CDs-based lubricants with improved antiwear and friction-reducing performance. Compared with pure PEG, the coefficient of friction (COF) of the N,S-CDs(BTH)-based lubricant decreased to 0.108 from 0.292, accompanied by a 91.2% reduction in wear volume, and the maximum load carrying capacity increased to 450 from 150 N.

Real-Time Estimation of Human Arm Dynamic Parameters Based on Optical

Abstract A flexible optical intensity sensor is designed in this study to address the poor adaptability of fixed-value parameters in exoskeleton research, which makes it difficult to handle system changes and uncertainties. The light transmission portion of the sensor is made of TPU and PET, exhibiting flexibility and bendable deformation characteristics, as well as good sensitivity, anti-interference capability, and stability. The flexible optical sensor is fixed on the side of the binding device, which is installed on the biceps brachii to collect the optical intensity loss signals after sensor bending. By utilizing this method, parameters such as the cross-sectional radius, arm centroid, and moment of inertia can be estimated in real-time. Finally, the estimated radius values are compared with theoretical values, and the accuracy is verified by combining the kinematic model. Experimental results demonstrate that the proposed method achieves a parameter information error of less than 8.63% and a stability better than 4.3%. Compared to the traditional fixed parameter method, the stability has improved by 25.06%, and the accuracy has improved by 9.04%.

Synthesis and Aggregation-Induced Emission Properties of New Carbazole-Based Pyranones and their Ring Transformed Derivatives

A new series of N-phenyl-carbazole (N-phCbz) appended pyranones were designed and synthesized using α-oxo-ketene-S, S-acetal under mild reaction conditions in good yields. The reactivity of donor-acceptor (D-A)-based 2H-pyranones was utilised to develop their ring-transformed benzene-cored N-phenyl-carbazole derivatives. All the synthesised carbazole-based pyranones showed aggregation-induced emission (AIE) characteristics in 80-99% water fraction (fw) in DMSO. Among all the synthesized compounds, 6-(4-(9H-carbazol-9-yl)phenyl)-4-(methylthio)-2-oxo-2H-pyran-3-carbonitrile exhibited excellent AIE behaviour with ~70 fold increase in fluorescence in 80% fw at 550nm. Furthermore, this compound showed exceptionally high fluorescence in nonpolar solvent (THF) as compared to polar solvents like DMSO (~200-fold increase in fluorescence). The DFT, DSC and TGA analysis of the synthesised D--A compounds suggested the strong electron donor ability of N-phCbz, with good thermal stability in the range of 231-393 °C. These N-phenyl-carbazole-appended pyranones with interesting AIE properties have great potential as probes for bioimaging applications as well as for optoelectronic materials.

Thermal Dehydrogenation Impact on Positive Bias Stability of Amorphous InSnZnO Thin-Film Transistors.

Recently, the growing demand for amorphous oxide semiconductor thin-film transistors (AOS TFTs) with high mobility and good stability to implement ultrahigh-resolution displays has made tracking the role of hydrogen in oxide semiconductor films increasingly important. Hydrogen is an essential element that contributes significantly to the field effect mobility and bias stability characteristics of AOS TFTs. However, because hydrogen is the lightest atom and has high reactivity to metal and oxide materials, elucidating its impact on AOS thin films has been challenging. Therefore, in this study, we propose controlling the hydrogen quantities in amorphous InSnZnO (a-ITZO) thin films through thermal dehydrogenation to precisely reveal the hydrogen influences on the electrical characteristics of a-ITZO TFTs. The as-deposited device containing 15.69 × 1015 atoms/cm2 of hydrogen exhibited a relatively low saturation mobility of 18.1 cm2/V·s and poor positive bias stress stability. However, depending on the extent of thermal dehydrogenation, not only did the hydrogen quantity and interface defect density (DIT) decrease but also the conductivity and surface energy increased due to the rise in oxygen vacancies and hydroxyl groups in a-ITZO thin films. As a result, the a-ITZO TFT with a hydrogen amount of 4.828 × 1015 atoms/cm2 showed that the saturation mobility improved up to 36.8 cm2/V·s, and positive bias stress stability was remarkably enhanced. Hence, we report the ability to manage the hydrogen quantity with thermal dehydrogenation and demonstrate that high-performance a-ITZO TFTs can be realized when an appropriate hydrogen concentration is achieved.

Metolachlor Detection in Grain Using N‐Doped Carbon Quantum Dots and the Intramolecular Charge Transfer Effect

Herein, nitrogen is doped into carbon quantum dots (N‐CQDs) using a hydrothermal method for the rapid detection of metolachlor in grain. The morphological features, elemental compositions, and optical properties of the N‐CQDs are then analyzed and investigated using transmission electron microscopy, X‐ray photoelectron spectroscopy, and fluorescence spectroscopy, respectively. Based on the principle of intramolecular charge transfer, a fluorescent probe is constructed for the rapid detection of metolachlor. Under optimal experimental conditions, the fluorescence intensity change values of the N‐CQDs and metolachlor concentration have a good linear relationship when the concentration of metolachlor is in the range of 0.0125−2.5 μg mL−1. An evaluation of the method shows that the method has good selectivity, reproducibility, and stability, with a limit of detection of 1.63 μg kg−1 and a limit of quantification of 3.92 μg kg−1. The spiked recoveries of six real samples are tested using a spiked recovery assay that yielded spiked recoveries in the range of 105.05−87.13%, and their relative standard deviations (n = 3) ranged from 4.62% to 0.61%, indicating that the method can be used for detection in actual samples with good precision and stability.

Enhancing Efficiency and Durability of Perovskite Solar Cells with Chlorine-Functionalized Fully Conjugated Porous Aromatic Framework.

Non-radiative recombination, caused by trap states, significantly hampers the efficiency and stability of perovskite solar cells (PSCs). The emerging porous organic polymers (POPs) show promise as a platform for designing novel defect passivation agents due to their rigid and porous structure. However, the POPs reported so far lack either sufficient stability or clear sites of interactions with the defects. Herein, two chlorine-functionalized, fully conjugated porous aromatic frameworks (PAFs) were constructed via a decarbonylation reaction. The chlorinated PAFs feature unique long-range conjugated networks bearing multiple chlorine atoms, significantly improving the photovoltaic performance and stability of doped solar cells. Combined experimental and theoretical analyses confirmed the strong passivation effects of conjugated structure to the defect through Cl sites. Specifically, PAF-159, bearing a triphenylamine moiety, demonstrated stronger Cl-Pb bonding and higher passivation efficiency due to the presence of π* anti-bonding orbitals, which elevate the HOMO energy level and facilitate Cl-Pb charge transfer. Consequently, we obtained high-performance PAF-159-doped devices with advanced PCE (24.3%), good storage stability (retaining 86% after 3000 hours), and good long-term operational stability (retaining 92% after 350 hours).

Application of external fixator combined with Kirschner wire fixation for oblique and comminuted distal humeral metaphyseal-diaphyseal junction fractures in children

To analyze the effectiveness of external fixator combined with Kirschner wire (EF-KW) fixation in the treatment of oblique and comminuted distal humeral metaphyseal-diaphyseal junction (DHMDJ) fractures in children. A clinical data of 22 children with DHMDJ fractures who met the selection criteria between April 2021 and December 2023 was retrospectively analyzed. All patients were treated with EF-KW fixation. There were 14 boys and 8 girls with an average age of 6.8 years (range, 1.5-12.0 years). The time from injury to operation was 14-38 hours (mean, 24.2 hours). There were 18 cases of comminuted fractures and 4 cases of oblique fractures; and 1 case of median nerve injury and 1 case of radial nerve injury before operation. The occurrence of postoperative complications was recorded. At last follow-up, the function of the affected elbow joint was evaluated according to the Mayo elbow joint function score, and the Baumann's angle (BA) and humero-capitellar angle (HCA) of the affected and healthy sides were recorded and compared. All fractures were successfully treated with closed reduction and no complications such as nerve injury occurred. Superficial infection occurred in 4 cases after operation and healed after symptomatic treatment. The incisions of other patients healed by first intention. All patients were followed up 9-24 months (mean, 13.8 months). At last follow-up, according to the Mayo elbow joint function score, the elbow joint function was rated as excellent in 15 cases, good in 6 cases, and fair in 1 case, with an excellent and good rate of 95.5%. The neurologic injury before operation recovered gradually. X-ray films reexamination showed that all fractures healed, and the healing time of fractures ranged from 29 to 61 days, with an average of 35.6 days. At last follow-up, there was no significant difference in BA and HCA between the healthy side and the affected side ( P>0.05). During follow-up, 1 case developed mild cubitus varus, while the other patients had no serious complications. EF-KW fixation for oblique and comminuted DHMDJ fractures in children has the advantages of less trauma, simple operation, easy reduction, good stability after reduction, low incidence of serious complications, and good elbow functional recovery.

Ranitidine degradation in layered double hydroxide activated peroxymonosulfate system: impact of transition metal composition and reaction mechanisms.

Ranitidine, a competitive inhibitor of histamine H2 receptors, has been identified as an emerging micropollutant in water and wastewater, raising concerns about its potential impact on the environment and human health. This study aims to address this issue by developing an effective removal strategy using two types of layered double hydroxide (LDH) catalysts (i.e., CoFeLDH and CoCuLDH). Characterization results show that CoFeLDH catalyst has superior catalytic properties due to its stronger chemical bond compared to CoCuLDH. The degradation experiment shows that 100% degradation of ranitidine could be achieved within 20min using 25mg/L of CoFeLDH and 20mg/L of peroxymonosulfate (PMS). On the other hand, CoCuLDH was less effective, achieving only 70% degradation after 60min at a similar dosage. The degradation rate constant of CoFeLDH was 10 times higher than the rate constant of CoCuLDH at different pH range. Positive zeta potential of CoFeLDH made it superior over CoCuLDH regarding catalytic oxidation of PMS. The catalytic degradation mechanism shows that sulfate radicals played a more dominant role than hydroxyl radicals in the case of LDH catalysts. Also, CoFeLDH demonstrated a stronger radical pathway than CoCuLDH. XPS analysis of CoFeLDH revealed the cation percentages at different phases and proved the claim of being reusable even after 8 cycles. Overall, the findings suggest that CoFeLDH/PMS system proves to be a suitable choice for attaining high degradation efficiency and good stability in the remediation of ranitidine in wastewater.

All-Organic Piezo-Photocatalytic Film with Highly Efficient Catalysis, Weak-Force Excitation, and Recyclability.

Polyaniline (PANI), a typical organic photocatalyst, has an adjustable structure and good stability, can be easily synthesized on a large scale, and is economical. PANI is doped with ions to regulate its internal structure and improve its photocatalytic performance. However, its photocatalytic performance is limited by the doping concentration and its intrinsic properties, hindering its further application. Herein, PANI films with a piezo-photocatalytic function are fabricated to improve photocatalytic performance and explore their self-powered environmental purification property. PANI/poly(vinylidene fluoride-co-hexafluoropropylene) (PVDF-HFP) sandwich films, with PVDF-HFP as the interlayer, are prepared by introducing a piezoelectric field into PANI photocatalysts, thereby achieving excellent piezo-photocatalytic performance. The as-fabricated piezo-photocatalyst degrades methyl orange at a rate of 91.2% after 60min under magnetic stirring. Owing to the low Young's modulus of the all-organic catalyst, self-powered purification is realized using the PANI/PVDF-HFP film. Leaf surfaces are functionalized by loading the film in them for removing pollutants under sunlight and water flow. Thus, this study proposes a common strategy, wherein a piezoelectric interlayer is introduced to load the organic photocatalyst for preparing an all-organic piezo-photocatalyst. This piezo-photocatalyst can be easily recycled and responds to weak forces, realizing its application for self-powered environmental purification.

Vacuum deposition of χ(2) nonlinear organic single crystal films on silicon

Integrating second order nonlinear (χ(2)) optical materials on chip is an ongoing challenge for Si photonics. Noncentrosymmetric molecular crystals have the potential to deliver high χ(2) nonlinearity with good thermal stability, but so far have been limited to growth from solution or the melt, which are both difficult to control and scale up in manufacturing. Here, we show that large (&amp;gt;100 μm) single crystal domains of the nonlinear molecule 2-[3-(4-hydroxystyryl)-5,5-dimethylcyclohex-2-enylidene] malononitrile (OH1) can be grown monolithically on either glass or Si via vacuum evaporation, followed by a short thermal annealing step. The crystallites are tens of nanometer thick and exhibit strong second harmonic generation with their primary χ(2) tensor component lying predominantly in plane. Remarkably, we find that a single domain can grow uninterrupted through nearby channels etched on a Si wafer, which may provide a path to integrate OH1 on Si or Si3N4 waveguides for a broad range of χ(2)-based photonic integrated circuit functionality.

Piezoelectric Enhancement in P(VDF-TrFE) Copolymer Films via Controlled and Template-Induced Epitaxy.

The surge in wearable electronics and Internet of Things technologies necessitates the development of both flexible sensors and a sustainable, efficient, and compact power source. The latter further challenges conventional batteries due to environmental pollution and compatibility issues. Addressing this gap, piezoelectric energy harvesters emerge as one kind of promising alternative to convert mechanical energy from ambient sources to electrical energy to charge those low-energy-consumption electronic devices. Despite slightly lower piezoelectric performance compared with those inorganic materials, piezoelectric polymers, notably poly(vinylidene fluoride-co-trifluoroethylene) P(VDF-TrFE), offer compelling properties for both flexible mechanical energy harvesting and self-powered strain/stress sensing, though their piezoelectric performance is expected to be further enhanced via varieties of modulation strategies of microstructures. Herein, we reported the controlled epitaxy process of micrometer-thick copolymer films with the cooperation of friction-transferred poly(tetrafluoroethylene) templates and precise modulation of the annealing conditions. Epitaxial P(VDF-TrFE) films present averaged d33 piezoelectric coefficient of -58.2 pC/N between 50 Hz and 1 kHz with good electromechanical and thermal stability. Owing to the nature of anisotropic crystallization, the epitaxial films exhibit an anisotropic transverse piezoelectric property. Epitaxial films were further utilized for mechanical energy harvesting and monitoring of human pulsation and respiration. This study provided a feasible route for the development of high-performance flexible piezoelectric devices to meet the requirement of flexible electronics.