Concentration Of Gold Nanoparticles Research Articles

Feasibility Simulation of 3D Benchtop Multi-Pinhole X-ray Fluorescence Computed Tomography with Two Novel Geometries

In this work, we developed and validated two novel imaging geometries of benchtop multi-pinhole X-ray fluorescence computed tomography (XFCT) systems with Geant4 Toolkit. One of the Monte Carlo (MC) models utilized a fan beam source to illuminate a single slice of the object, a detector and a multi-pinhole collimator to image each slice’s X-ray fluorescence (XRF). The other model consisted of a cone-beam X-ray source (designed as a 5 mm wide fan beam to reduce simulation time) to scan the whole object, two detectors and two multi-pinhole collimators to image the emissions. The phantom used in the simulations included four sections, each with three cone-shaped gold nanoparticle (GNP) inserts (5 mm in height, 3 mm in diameter across the top) with center-to-center distances of 4 mm, 4.5 mm and 4.86 mm. The GNPs concentration was 0.1 wt. %, 0.3 wt. %, 0.5 wt. % and 0.7 wt. %, respectively. The diameter of the multi-pinhole collimator was 1 mm. Performance was evaluated for pinhole-detector-distance (PDD) of 5 cm, 3.5 cm and 2.5 cm, and the results for different object layers and for single pinhole and multi-pinhole (9 pinholes) imaging were compared. The data showed that results worsened with decreasing GNPs insert diameters and with decreasing PDD (object-pinhole-distance was fixed). The multi-pinhole configurations performed better than a single pinhole. The detection limit for the first multi-pinhole operation was 0.21 wt. %; the second was 0.24 wt. %. Detection limits for the single pinhole were 0.32 wt. % and 0.35 wt. %, respectively. The first MC model could acquire 2D slice images of the object without rotation and the second MC model could image the 3D object efficiently. These two novel multi-pinhole systems could potentially provide a bioimaging modality for nanomedical applications.

Evanescent wave sensor for potassium ion detection with special reference to agricultural application

We are introducing 4′-aminodibenzo-18-crown-6 ether (A2BC) modification of gold nanoparticles coated optical fiber as a new sensor for evanescent wave trapping on the polymer optical fiber to detect low-level potassium ions. We characterized these gold nanoparticles by X-ray Diffraction (XRD), Fourier-transform infrared spectroscopy (FTIR), Nanoparticle tracking analysis (NTA), Field Emission scanning electron microscopes (FE-SEM), and UV–Visible spectroscopy. In the present study, we modified the gold nanoparticles with A2BC for selective sensing of potassium (K+) ions. The interaction between A2BC and K+ ions leads to the temporary formation of a sandwich structure as crown ethers form steady complexes with metal ions. This sandwich structure leads to potassium detection. In our implementation, related operational parameters such as cladding length, roughness, and concentration of A2BC and gold nanoparticles, were optimized to achieve a detection threshold of 1 ppm. Additionally, we optimized the optical fiber sensor to increase its detection sensitivity from the μV range to the mV range. The sensor demonstrates a fast response time (10 s) and high sensitivity, selectivity, and stability, which cause a wide linear range (1–100 ppm) and a low limit of detection (LOD = 0.14 ppm). Lastly, we tested the sensor for a soil-sensing application.

Light-Induced Clusterization of Gold Nanoparticles: A New Photo-Triggered Antibacterial against E. coli Proliferation

Metallic nanoparticles show plasmon resonance phenomena when irradiated with electromagnetic radiation of a suitable wavelength, whose value depends on their composition, size, and shape. The damping of the surface electron oscillation causes a release of heat, which causes a large increase in local temperature. Furthermore, this increase is enhanced when nanoparticle aggregation phenomena occur. Local temperature increase is extensively exploited in photothermal therapy, where light is used to induce cellular damage. To activate the plasmon in the visible range, we synthesized 50 nm diameter spherical gold nanoparticles (AuNP) coated with polyethylene glycol and administered them to an E. coli culture. The experiments were carried out, at different gold nanoparticle concentrations, in the dark and under irradiation. In both cases, the nanoparticles penetrated the bacterial wall, but a different toxic effect was observed; while in the dark we observed an inhibition of bacterial growth of 46%, at the same concentration, under irradiation, we observed a bactericidal effect (99% growth inhibition). Photothermal measurements and SEM observations allowed us to conclude that the extraordinary effect is due to the formation, at low concentrations, of a light-induced cluster of gold nanoparticles, which does not form in the absence of bacteria, leading us to the conclusion that the bacterium wall catalyzes the formation of these clusters which are ultimately responsible for the significant increase in the measured temperature and cause of the bactericidal effect. This photothermal effect is achieved by low-power irradiation and only in the presence of the pathogen: in its absence, the lack of gold nanoparticles clustering does not lead to any phototoxic effect. Therefore, it may represent a proof of concept of an innovative nanoscale pathogen responsive system against bacterial infections.

AuNP-Modulated qPCR: An Optimized System for Detecting MIR Biophotons Released in DNA Replication.

Living systems can utilize energy with a high efficiency. Biophotons are proposed to modulate biological functions with such efficiency; however, the underlying mechanism remains unexplored, especially due to the challenge of ultraweak mid-infrared (MIR) light detection and the theoretical perturbation from spontaneous MIR emission. Here, we proposed an optimized system to detect MIR biophotons generated in the hydrolysis of deoxynucleotide triphosphates (dNTPs, energy-storing molecules similar to ATP). The system used a quantitative polymerase chain reaction (qPCR) that was modulated by gold nanoparticle (AuNP) concentration and thus by the inter-AuNP distance, which depends on the concentration above. The measurements indicate that 33- and 84-THz photons are released by dNTP hydrolysis, which can drive DNA replication. Our findings provide a novel chain-reaction-based method for detecting MIR photons in solution, and pave a way for photon-based insights to understand the highly efficient energy utilization of biology.

Quantification of nanoparticles' concentration inside polymer films using lock-in thermography.

Thin nanocomposite polymer films embedding various types of nanoparticles have been the target of abundant research to use them as sensors, smart coatings, or artificial skin. Their characterization is challenging and requires novel methods that can provide qualitative as well as quantitative information about their composition and the spatial distribution of nanoparticles. In this work, we show how lock-in thermography (LIT) can be used to quantify the concentration of gold nanoparticles embedded in polyvinyl alcohol (PVA) films. LIT is an emerging and non-destructive technique that measures the thermal signature produced by an absorbing sample illuminated by modulated light with a defined frequency. Films with various concentrations of gold nanoparticles of two different sizes have been prepared by evaporation from homogeneous aqueous PVA gold nanoparticle suspensions. When the thin films were illuminated with monochromatic light at a wavelength close to the plasmonic resonance signature of the nanoparticles, the amplitude of the thermal signature emitted by the nanoparticles was recorded. The measurements have been repeated for multiple modulation frequencies of the incident radiation. We have developed a mathematical method to quantitatively relate the concentration of nanoparticles to the measured amplitude. A discussion about the conditions under which the sample thickness can be determined is provided. Furthermore, our results show how LIT measurements can easily detect the presence of concentration gradients in samples and how the model allows the measured signal to be related to the respective concentrations. This work demonstrates the successful use of LIT as a reliable and non-destructive method to quantify nanoparticle concentrations.

Effect of gold nanoparticle concentration on spectral emission of AlO molecular bands in nanoparticle-enhanced laser-induced Al plasmas

This study optimized gold nanoparticle concentration to improve the spectral emission of AlO molecular bands in nanoparticle-enhanced laser-induced Al plasmas.

High-resolution synchrotron K-edge subtraction CT allows tracking and quantifying therapeutic cells and their scaffold in a rat model of focal cerebral injury and can serve as a reference for spectral photon counting CT.

Background: The objective of this study was to demonstrate that synchrotron K-edge subtraction tomography (SKES-CT) can simultaneously track therapeutic cells and their encapsulating carrier, in vivo, in a rat model of focal brain injury using a dual-contrast agent approach. The second objective was to determine if SKES-CT could be used as a reference method for spectral photon counting tomography (SPCCT). Methods: Phantoms containing different concentrations of gold and iodine nanoparticles (AuNPS/INPs) were imaged with SKES-CT and SPCCT to assess their performances. A pre-clinical study was performed in rats with focal cerebral injury which intracerebrally received AuNPs-labelled therapeutic cells encapsulated in a INPs-labelled scaffold. Animals were imaged in vivo with SKES-CT and back-to-back with SPCCT. Results: SKES-CT revealed to be reliable for quantification of gold and iodine, whether alone or mixed. In the preclinical model, SKES-CT showed that AuNPs remained at the site of cell injection, while INPs expanded within and/or along the lesion border, suggesting dissociation of both components in the first days post-administration. Compared to SKES-CT, SPCCT was able to correctly locate gold, but not completely located iodine. When SKES-CT was used as reference, SPCCT gold quantification appeared very accurate both in vitro and in vivo. Iodine quantification by SPCCT was also quite accurate, albeit less so than for gold. Conclusion: We here provide the proof-of-concept that SKES-CT is a novel method of choice for performing dual-contrast agent imaging in the context of brain regenerative therapy. SKES-CT may also serve as ground truth for emerging technologies such as multicolour clinical SPCCT.

Photopolymerization of 1D photonic structures induced by nematic-isotropic phase transition in liquid crystal.

In this paper, two types of polymer-stabilized periodic structures created by photopolymerization of a nematic liquid crystal confined in a cylindrical structure are presented. Both types of structures were induced by nematic-isotropic phase transition in liquid crystal doped with gold nanoparticles. The first type of structure was created by stabilizing periodic phase separation at the nematic-isotropic phase transition temperature. As a result, a periodic structure with two distinct molecular orientations of nematic liquid crystal was achieved. The period of this structure was equal to the period induced by nematic-isotropic phase separation. The second type of structure, also related to the phase transition, was created due to an induced periodic density change of gold nanoparticles in the sample volume. Through photopolymerization it was possible to preclude the dispersion of gold nanoparticles while preserving the periodicity. An increased concentration of gold nanoparticles caused periodic defects in molecular orientation of the liquid crystal. Both types of structures were stable at room temperature. Consequently, two types of 1D photonic structures stabilized by photopolymerization are presented.

Физико-химические свойства наночастиц золота в рудах и катализаторах

Introduction. At present, in the instrumental study of the mineral forms of finding gold in geogenic and technogenic ores, more and more attention has been paid to free gold, with a size of several nanometers. Such gold has been found in almost all types of its geogenic ores: starting with deposits of primary sulfide ores and ending with various gold-bearing placers. A similar situation is observed with technogenic gold-bearing ores accumulated in numerous dumps and tailings. At the same time, with the increase in research on nanogold, not only its fundamental, but also practical importance grows, because. in theoretical and applied research, more and more of its actual physical and chemical properties and previously unknown phenomena and effects accompanying them are discovered and clarified. Research methods and materials. An important aspect is the instrumental study of the geometry of various forms of nanogold occurrence in natural (geogenic) and technogenic ores and minerals. The instrumental and analytical part of our research was based on the visualization of nanoparticles obtained from the Nanjing Research Institute of the Chemical Industry under Sinopec (PRC), carried out on a JEOL 2010F microscope. Research results. The studied gold nanoparticles were presented in the form: • spherical fullerene-like monoparticles; • fullerene-like gold cells, consisting of a different number (from 13 to 20 clusters) of gold nanoparticles; • self-organized «fractal» dendrites; • rather complex composites with the participation of nanogold; • various aggregates of nanoparticles, etc. The concentrations of gold nanoparticles vary significantly from one deposit to another and between individual ore facies (even within the same deposit). Discussion of the obtained results. It was found that nanogold can be contained in arsenopyrites in 2 main forms: a) as a structurally bound solid solution (Au + 1) located in the lattice of this mineral; b) in separate mineral inclusions of submicron size or nanoparticles. Gold nanoparticles (5-10 nm in size) detected in arsenopyrite in concentrations up to 4% mass fraction are sufficiently representative to account for their amount in gold-bearing ores. A gold nanoparticle with a size of 3 nm usually has an average coordination number CN = 9.5, similar nanoparticles with a size of 1 nm have an average CN = 6, and nanoparticles with a size of 0.5–1 nm have an average CN = 3.6. Conclusion. To date, a nanoparticle catalyst has been developed in which gold clusters are attached to metal oxides that are semiconductors. At the same time, their number is very limited and includes only Fe2O3, TiO2, CeO2, and MgO compounds, which can be used not only in the form of nanoparticles, but also nanofilms. Such an innovative nanocatalyst ensures the efficient flow of a number of oxidative and other processes with hydrocarbons at normal temperatures, which is difficult to achieve by other methods. Findings. The article presents the results of studies of the physicochemical properties of gold nanoparticles installed in ores and catalysts. The morphology of gold nanoparticles has been established. The character of gold speciation in various sulfides is determined. The presence of gold nanoparticles in ores and rocks in the state of colloids has been confirmed. The catalytic activity of nanoparticles of various shapes and chemical states was revealed, depending on the values of the ambient temperature. The results of the research can be useful in the enrichment of gold-bearing ores of upland deposits.

Nanoscale viscoelasticity characterization of engineered organometallic nanocomposite thin films for biomedical applications

This work is focused on nanoscale viscoelastic properties characterization of gold nanoparticles (AuNPs) reinforced chitosan nanocomposites using nanoindentation. Chitosan nanocomposite films reinforced with gold nanoparticles concentration (w/v) up to 0.25 mg/ml in chitosan were prepared via a solution evaporation technique. Creep and stress relaxation responses were modeled using the generalized Voigt model and the generalized Maxwell model, respectively. Nanoindentation experimental data were analyzed using these models to obtain model constants. Both displacement- and load-controlled ramp functions were used to indent the samples with a 100 µm conospherical indenter tip. The moduli increased with an increase in AuNPs concentration in chitosan. The plasticity index increased with an increase in AuNPs concentration indicating that the deformation became more plastic with an increase in the filler. The results also show the time-dependent viscous response of the nanocomposite is mainly governed by the response of the matrix because the characteristic time scales of the nanocomposite films are independent of the AuNPs concentration.

Gold Nanostar Characterization by Nanoparticle Tracking Analysis.

We demonstrate the application of nanoparticle tracking analysis (NTA) for the quantitative characterization of gold nanostars (GNSs). GNSs were synthesized by the seed-mediated growth method using triblock copolymer (TBP) gold nanoparticles (GNPs). These GNPs (≈ 10 nm) were synthesized from Au3+ (≈ 1 mM) in aqueous F127 (w/v 5%) containing the co-reductant ascorbic acid (≈ 2 mM). The GNS tip-to-core aspect ratio (AR) decreased when higher concentrations of GNPs were added to the growth solution. The AR dependency of GNSs on Au3+/Au(seed) concentration ratio implies that growth is partly under kinetic control. NTA measured GNS sizes, concentrations, and relative scattering intensities. Molar absorption coefficients ∼ 109-1010 M-1 cm-1 (ε400nm) for each batch of GNSs were determined using the combination of extinction spectra and NTA concentrations for heterogeneous samples. NTA in combination with UV-vis was used to derive the linear relationships: (1) hydrodynamic size versus localized surface plasmon peak maxima; (2) ε400nm versus localized surface plasmon peak maxima; (3) ε400nm versus hydrodynamic size. NTA for quantitative characterization of anisotropic nanoparticles could lead to future applications, including heterogeneous colloidal catalysis.

Dual imaging modality of fluorescence and transmission X-rays for gold nanoparticle-injected living mice.

X-ray fluorescence (XRF) imaging for metal nanoparticles (MNPs) is a promising molecular imaging modality that can determine dynamic biodistributions of MNPs. However, it has the limitation that it only provides functional information. In this study, we aim to show the feasibility of acquiring functional and anatomic information on the same platform by demonstrating a dual imaging modality of pinhole XRF and computed tomography (CT) for gold nanoparticle (GNP)-injected living mice. By installing a transmission CT detector in an existing pinhole XRF imaging system using a two-dimensional (2D) cadmium zinc telluride (CZT) gamma camera, XRF and CT images were acquired on the same platform. Due to the optimal X-ray spectra for XRF and CT image acquisition being different, XRF and CT imaging were performed by 140 and 50kV X-rays, respectively. An amount of 40mg GNPs (1.9nm in diameter) suspended in 0.20ml of phosphate-buffered saline were injected into the three BALB/c mice via a tail vein. Then, the kidney and tumor slices of mice were scanned at specific time points within 60min to acquire time-lapse in vivo biodistributions of GNPs. XRF images were directly acquired without image reconstruction using a pinhole collimator and a 2D CZT gamma camera. Subsequently, CT images were acquired by performing CT scans. In order to confirm the validity of the functional information provided by the XRF image, the CT image was fused with the XRF image. After the XRF and CT scan, the mice were euthanized, and major organs (kidneys, tumor, liver, and spleen) were extracted. The ex vivo GNP concentrations of the extracted organs were measured by inductively coupled plasma mass spectrometry (ICP-MS) and L-shell XRF detection system using a silicon drift detector, then compared with the in vivo GNP concentrations measured by the pinhole XRF imaging system. Time-lapse XRF images were directly acquired without rotation and translation of imaging objects within an acquisition time of 2min per slice. Due to the short image acquisition time, the time-lapse in vivo biodistribution of GNPs was acquired in the organs of the mice. CT images were fused with the XRF images and successfully confirmed the validity of the XRF images. The difference in ex vivo GNP concentrations measured by the L-shell XRF detection system and ICP-MS was 0.0005-0.02% by the weight of gold (wt%). Notably, the in vivo and ex vivo GNP concentrations in the kidneys of three mice were comparable with a difference of 0.01-0.08wt%. A dual imaging modality of pinhole XRF and CT imaging system and L-shell XRF detection system were successfully developed. The developed systems are a promising modality for in vivo imaging and ex vivo quantification for preclinical studies using MNPs. In addition, we discussed further improvements for the routine preclinical applications of the systems.

Novel Antireflection Coatings Obtained by Low-Temperature Annealing in the Presence of Tetrabutylammonium Bromide and Gold Nanoparticles.

In this work, nanoporous antireflective coatings on silicate glass were obtained from silicon dioxide sol compositions by the sol-gel method in the presence of quaternary ammonium salt (tetrabutylammonium bromide) at different annealing temperatures (200-250 °C). Varying the salt concentration from 3 to 5 wt.%, we achieved the transmittance of the coatings of about 97% at 250 °C in comparison with 91% for clean glass in the wavelength range from 400 to 1100 nm. The addition of gold nanoparticles to the composition containing 5 wt.% tetrabutylammonium bromide allowed us to decrease the annealing temperature to 200 °C, preserving the transmittance at the level of 96.5%. For this case, the optimal concentration of gold nanoparticles is determined (2.6 × 10-9 mol/mL). According to the SEM analysis, the obtained antireflective coatings contain pores with a minimum area size up to 4 nm2.

A Simple Model to Estimate the Number of Metal Engineered Nanoparticles in Samples Using Inductively Coupled Plasma Optical Emission Spectrometry.

Accurate determination of the size and the number of nanoparticles plays an important role in many different environmental studies of nanomaterials, such as fate, toxicity, and occurrence in general. This work presents an accurate model that estimates the number of nanoparticles from the mass and molar concentration of gold nanoparticles (AuNPs) in water. Citrate-capped AuNPs were synthesized and characterized using transmission electron microscopy (TEM) and ultraviolet–visible spectroscopy (UV-vis). A mimic of environmental matrices was achieved by spiking sediments with AuNPs, extracted with leachate, and separated from the bulk matrix using centrifuge and phase transfer separation techniques. The quantification of AuNPs’ molar concentration on the extracted residues was achieved by inductively coupled plasma optical emission spectroscopy (ICP-OES). The molar concentrations, an average diameter of 27 nm, and the colloidal suspension volumes of AuNPs enable the calculation of the number of nanoparticles in separated residues. The plot of the number of AuNPs against the mass of AuNPs yielded a simple linear model that was used to estimate the number of nanoparticles in the sample using ICP-OES. According to the authors’ knowledge, this is the first adaptation of the gravimetric method to ICP-OES for estimating the number of nanoparticles after separation with phase transfer.

Synthesis of Ciprofloxacin-capped Gold Nanoparticles Conjugates with Enhanced Sonodynamic Antimicrobial Activity in vitro

The purpose of this article is to discuss whether gold nanoparticles (GNPs) play an auxo-action on ciprofloxacin (CIP)-mediated sonodynamic antimicrobial chemotherapy (SACT) in vitro. The measuring criterion of SACT, bactericidal efficiency, was measured by plate colony-counting methods. According to research findings, the duration of ultrasound (US) exposure, solution temperature and CIP:GNPs concentration were all critical influencing factors of SACT. Furthermore, scanning electron microscopy revealed that the group of CIP:GNPs combined with US showed the most severe damaged effect on Escherichia coli and Staphylococcus aureus, resulting in the loss of their typical microbial morphology and the disclosure of contents. Therefore, the above experimental results confirmed initially that GNPs could enhance the bacteriostasis of CIP-mediated SACT. And the intracellular reactive oxygen species (ROS) detection assays proved that this acceleration might be connected to the ROS generated through the ultrasonic mechanics. In conclusion, GNPs would be regarded as a promising auxiliary material for SACT, since they are both used to be the medication carriers and sonosensitizer accelerants.

Monte Carlo modeling of gold nanoparticles detection limits of benchtop three‐dimensional L‐ and K‐shell X‐ray fluorescence mapping systems

AbstractThis study aims to investigate the detection limits of gold nanoparticle (GNP) concentrations by Monte Carlo (MC) modeling of benchtop polychromatic K‐ and L‐shell X‐ray fluorescence mapping system. In Monte Carlo N‐Particle (MCNP version 6.1) simulations, a 0.25‐cm‐diameter cylinder containing GNPs of various concentrations (i.e., 0.005%–1.0% gold by weight, wt%) was assumed to be located at the center of a cylindrical water phantom of various diameters (1.0–10 cm). Two different sets of incident pencil beam X‐rays and detectors were modeled to stimulate X‐ray fluorescence (XRF) of GNPs: (1) 62 kVp and silicon drift detector for L‐XRF, (2) 105 kVp and cadmium telluride detector for K‐XRF. The detection limits were calculated for given radiation doses to the center of phantom (375–1500 mGy). When the diameter of the phantom was 1 cm, the detection limits for L‐XRF and K‐XRF were an order of 0.001 wt% and of 0.01 wt%, respectively. The detectability of K‐XRF turned out to be superior to that of L‐XRF for the phantoms greater than or equal to 3 cm in diameter. The MC results will provide a guide for developing an optimal benchtop XRF imaging system for in vivo preclinical imaging, depending on the sizes of GNP‐loaded objects, GNP concentrations, and radiation doses.

Microdosimetric and radiobiological effects of gold nanoparticles at therapeutic radiation energies

Purpose The purpose of this study was to quantify the microscopic dose distribution surrounding gold nanoparticles (GNPs) irradiated at therapeutic energies and to measure the changes in cell survival in vitro caused by this dose enhancement. Methods The dose distributions from secondary electrons surrounding a single gold nanosphere and single gold nanocube of equal volume were both simulated using MCNP6. Dose enhancement factors (DEFs) in the 1 μm3 volume surrounding a GNP were calculated and compared between a nanosphere and nanocube and between 6 and 18 MV energies. This microscopic effect was explored further by experimentally measuring the cell survival of C-33a cervical cancer cells irradiated at 18 MV with varying doses of energy and concentrations of GNPs. Survival of cells receiving no irradiation, a 3 Gy dose, and a 6 Gy dose of 18 MV energy were determined for each concentration of GNPs. Results It was observed that the dose from electrons surrounding the gold nanocube surpasses that of a gold nanosphere up to a distance of 1.1 μm by 18.5% for the 18 MV energy spectrum and by 23.1% for the 6 MV spectrum. DEFs ranging from ∼2 to 8 were found, with the maximum DEF resulting from the case of the gold nanocube irradiated at 6 MV energy. Experimentally, for irradiation at 18 MV, incubating cells with 6 nM (0.10% gold by mass) GNPs produces an average 6.7% decrease in cell survival, and incubating cells with 9 nM (0.15% gold by mass) GNPs produces an average 14.6% decrease in cell survival, as compared to cells incubated and irradiated without GNPs. Conclusion We have successfully demonstrated the potential radiation dose enhancing effects in vitro and microdosimetrically from gold nanoparticles.

Nanocomposites Based on Antiferroelectric Liquid Crystal (S)-MHPOBC Doping with Au Nanoparticles.

Modification of the physical properties of the (S)-MHPOBC antiferroelectric liquid crystal (AFLC) by doping with low concentrations of gold nanoparticles is presented for the first time. We used several complementary experimental methods to determine the effect of Au nanoparticles on AFLC in the metal–organic composites. It was found that the dopant inhibits the matrix crystallization process and modifies the phase transitions temperatures and switching time, as well as increases the helical pitch and spontaneous polarization, while the tilt angle slightly changes. We also showed that both the LC matrix and Au nanoparticles show strong fluorescence in the green light range, and the contact angle depends on the temperature and dopant concentration.

Optimization of Photothermal Therapy Treatment Effect under Various Laser Irradiation Conditions.

The photothermal effect refers to a phenomenon in which light energy is converted into heat energy, and in the medical field, therapeutics based on this phenomenon are used for anticancer treatment. A new treatment technique called photothermal therapy kills tumor tissue through a temperature increase and has the advantages of no bleeding and fast recovery. In this study, the results of photothermal therapy for squamous cell carcinoma in the skin layer were analyzed numerically for different laser profiles, intensities, and radii and various concentrations of gold nanoparticles (AuNPs). According to the heat-transfer theory, the temperature distribution in the tissue was calculated for the conditions under which photothermal therapy was performed, and the therapeutic effect was quantitatively confirmed through three apoptotic variables. In addition, the laser intensity and the volume fraction of AuNPs were optimized, and the results provide useful criteria for optimizing the treatment effects in photothermal therapy.

Experimental Characterization and Statistical Analysis of Water‐Based Gold Nanofluids for Solar Applications: Optical Properties and Photothermal Conversion Efficiency

Optimizing optical and photothermal properties of the solar nanofluids (NFs) to be used in direct absorption solar collectors is a key issue to maximize efficiencies in these collector types. This work both experimentally and statistically analyzes the influence of the size (5 and 20 nm) and concentration (5.1, 28.2, and 51.3 ppm) of gold nanoparticles (NPs) on several important variables for collector performance: NF stability, extinction coefficient, photothermal efficiency, etc. The research work shows that the addition of small amounts of gold NPs, whose surface plasmon resonance has wavelengths close to 520 nm, greatly improves the light absorption capacity of the base fluid (water). The statistical analysis confirms the influence of NP size and concentration on photothermal conversion efficiency (PTE), which lead to an increase of up to 121% for the smallest‐sized NF with the highest concentration.