Glass Wool Research Articles

Sustainable Innovation in Ceiling: Exploring the Environmental Benefits of a New Plaster–Rock Wool Layered Recycled Composite

This paper presents a new layered plaster-based material for building purposes. First, a new manufacturing machine was designed to make the elaboration process easier. This manufacturing machine and the way it works are described. In this study, perlite and recycled glass wool (RGW) were added to traditional plaster with the aim of improving the performance of this material. Two series (with and without perlite) and three different layer configurations were developed and assessed. Recycled glass wool layered materials were subjected to both physical and mechanical characterisation to determine their suitability for precast elaboration. The addition of perlite resulted in a significant improvement in flexural strength. Moreover, the addition of RGW also gave rise to extra flexural strength when added. The two-layered samples performed better than the one-layered samples. Mechanical properties increased up to 75% when both the perlite and RGW layers were added. Potential Global Warming Potential (GWP 100) savings were also analysed, reporting up to 49% savings. A complementary cost analysis was performed, aimed at establishing potential savings in production costs; thus, 13–57% potential cost savings were reported. After that, a comparative analysis within the literature was conducted to contextualise the results obtained in this study.

Analyte protectant approach to protect amide-based synthetic cannabinoids from degradation and esterification during GC–MS analysis

The forensic analysis of amide-based synthetic cannabinoids (SCs) in seized materials is routinely performed using gas chromatography-mass spectrometry (GC–MS); however, a major challenge associated with GC–MS is the thermolytic degradation of substances with sensitive functional groups. Herein, we report the comprehensive thermal degradation and ester transformation of amide-based SCs, such as AB-FUBINACA, AB-CHMINACA, and MAB-CHMINACA, during GC–MS analysis and their treatment with analyte protectants (APs). These SCs were found to undergo thermolytic degradation during GC–MS in the presence of non-alcohol solvents. Using methanol as an injection solvent resulted in the conversion of the amide group to an ester group, producing other SCs such as AMB-FUBINACA, MA-CHMINACA, and MDMB-CHMINACA. Degradant and ester product formation has been interpreted as the adsorption of target SCs on glass wool via hydrogen bonding interactions between the active silanol and amide groups of the SCs, followed by an addition and/or elimination process. The factors found to influence the thermal degradation and/or esterification of the amide functional group include residence time, activity of glass wool, and injection volume. This report presents the fragmentation patterns of all compounds that were produced by degradation and esterification. Using 0.5 % sorbitol (AP) in MeOH as an injection solvent resulted in complete protection and improvement of the chromatographic shape of the compounds. This method has been successfully confirmed in terms of sensitivity, linearity, accuracy, and precision for standard solutions and tablet extraction using 0.5 % sorbitol in MeOH. Using AP increased the sensitivity by ten times or more compared to the use of only MeOH. The limit of detection for all analytes was determined as 25 ng/mL, and the calibration curves were linear over the concentration range of 50–2000 ng/mL. The values of accuracy error were below 11 %, and precision was less than 13 %. The effects of phytochemicals of herbal products, tablet ingredients, and biological matrices on the degradation and/or esterification and APs performance have also been evaluated in this work.

Evaluation of heterogeneous core sandwich panels for energy efficiency and fire safety in warehouse buildings

Sandwich panels are extensively used in the construction industry because of their superior thermal insulation performance and ease of installation. However, panels with combustible cores are prone to fire, whereas those with mineral-based cores exhibit lower thermal insulation capabilities. Therefore, to address these limitations, this study proposed a composite core approach to enhance both fire resistance and thermal insulation performance. A surface layer incorporated phenolic foam (PF), which fulfilled the fire resistance requirements and delivered excellent thermal insulation properties, and 30–40 mm of glass wool (GW) and mineral wool (MW) with exceptional fire resistance were applied. The heterogeneous core sandwich panels exhibited excellent flame-retardant performance, with a maximum peak heat release rate of 0.712 kW/m2 and a total heat release of 0.18 MJ/m2. This satisfied the semi-non-combustible flame retardancy level and ensured sufficient time for residents to evacuate safely. Moreover, based on its low thermal transmittance of 0.114–0.125 W/m2·K, when applied to warehouse-type buildings, heating energy consumption was reduced by approximately 10 % compared to sandwich panels based on inorganic core GW and MW. Heterogeneous core sandwich panels can exhibit excellent flame retardancy and thermal performance owing to the use of inorganic materials and PF, respectively.

Impacts of Aramid Fiber (PPTA), Glass Wool (GW), Aluminum (Al), and Silicon Carbide (SiC) Particles on Mechanical Behavior of Epoxy Hybrid Composites and their Morphological Investigation

AbstractParticle‐reinforced polymer composites have figured prominently in technological appliances owing to their high mechanical modulus and strength. Due to the obvious demand for lighter but more resilient composites to substitute heavy metal parts, several investigations have been made into particle‐based composites. The current research investigates the impact of reinforcing aramid fiber (PPTA), glass wool (GW), aluminum (Al), and silicon carbide (SiC) powder into an epoxy matrix on aspects of mechanical and morphological characteristics. Hand lay‐up technology was performed to manufacture composites at five different degrees of reinforcement loading (5, 10, 20, 30, and 40 wt. %). SEM and optical microscopes were used for microstructural investigation in order to evaluate the cohesion and dispersion of the reinforcing particles across the matrix phase of the hybrid composites. The elongation at break, flexural strength, flexural modulus, and hardness of epoxy‐PPTA‐GW−Al‐SiC hybrid composites improved, whereas the tensile strength and impact strength decreased from 5 wt. % to 40 wt. % loading. Among fabricated hybrid composite compositions, the morphological and mechanical characteristics obtained at 40 wt. % PPTA, GW, Al, and SiC powder loading are the best among all others.

Nonwoven acoustic panels from Himalayan nettle (Girardinia diversifolia L.) fibre

Sound absorption panels are being used extensively to mitigate the problem of noise pollution in buildings. Conventional materials used for sound absorption include glass wool, rock wool, mineral wool, asbestos, melamine, and polyurethane foam. However, recent studies show these materials can cause respiratory and skin problems. This has led to the search for natural and ecofriendly alternatives for sound absorbing materials. Lignocellulosic materials are cheap, renewable, biodegradable, and abundantly available and thus provide a viable option for use as sound absorbing materials. In this study, fibres extracted from the bark of Himalayan Nettle (Girardinia diversifolia L.) were used to prepare nonwoven webs using needle punching technique. Punch density was varied to create webs with variable properties. The effect of punch density on acoustic properties was studied. A positive correlation was observed between sample thickness and the Noise Reduction Coefficient. Samples having punch density of 75needles/cm2 showed the highest Noise Reduction Coefficient, attributable to their greater porosity and lower compactness. The study demonstrates that the morphological traits of the Himalayan nettle fibre, that is, a rough surface, flat elliptical cross-section, and a hollow core, make it an excellent sound absorption material. The acoustic properties can be tuned by varying the properties of the nonwoven web.

The influence of thermal diffusion on water migration through a porous insulation material

Excess water on pipes and equipment under porous insulation materials can lead to undesired corrosion. This work aims to clarify to what extent thermal diffusion affects the migration of water inside insulation materials subject to large temperature gradients. Since no experimental data is available on the thermal diffusion coefficients of humid air, revised Enskog theory for Mie fluids is used to estimate transport properties. Comparison to experimental data from literature shows that the theory reproduces the diffusion coefficient, viscosity and thermal conductivity of humid air within 8.7%, 5.0% and 3.5% respectively. The small discrepancies suggest that the theory can also provide reliable estimates of the thermal diffusion coefficients. In the investigated composition and temperature range, the theory predicts the Soret coefficient of water to be approximately ▪, while the Soret coefficient of oxygen varies from ▪ to +▪. A case study with heating of glass wool insulation containing humid air, encapsulating a cylindrical pipe is investigated. Non-equilibrium thermodynamics is used to consistently incorporate the Soret coefficients into the flux equations in a dynamic, non-isothermal model that includes diffusion, convection, thermal conduction and water sorption in the porous medium. With 50 K temperature difference across 5 cm of insulation, we find that at steady-state, thermal diffusion leads to a mole fraction of water in the gas phase that is about 1.5% higher at the hot location than if thermal diffusion is neglected.

Manufacturing and characterization of waste polyethylene terephthalate-based functional composites reinforced with organic and inorganic fillers

ABSTRACT Many fillers are employed as reinforcement in polymeric materials to improve their properties and reduce expenses. This research aims to improve the mechanical and thermophysical properties of waste polyethylene terephthalate (WPET). Using recycled materials is also one of the study’s objectives in support of environmental preservation. Glass fiber (3 wt.%, 6 wt.%, 9 wt.%, and 15 wt.%), calcium carbonate (5 wt.%, 15 wt.%, and 25 wt.%), and corn starch (3 wt.%) have all been added to WPET in different ratios to create composite materials. The mechanical strength, Shore D hardness tests, scanning electron microscopy (SEM), thermogravimetric analysis (TGA), Fourier transform infrared (FTIR) spectroscopy, and thermal, mechanical, physical, and chemical properties of these composites have all been investigated. It has been shown that while the amount of starch in the samples remains constant, the hardness increases as the amount of calcite and glass wool increases. The thermal conductivity does not significantly change as the ratio of glass fiber increases, notwithstanding a modest drop Nonetheless, the thermal conductivity values rise in tandem with the calcium carbonate (CaCO3) ratio.

Characterization and utilization of sawdust waste generated from advanced manufacture for its application as a thermal insulation in sustainable buildings using the blowing technique

The construction industry is vital for economic development, but it accounts for 40% of energy consumption and 45% of global greenhouse gas emissions. In this context, research has focused on reducing energy demand in homes, particularly through the development of insulation materials. Sawdust is a byproduct available annually in Chile in quantities exceeding 4.5 million tons. Therefore, the objective of this study was to characterize the physical and thermal properties of this waste to evaluate its use as a thermal insulation material. Stability and thermal conductivity tests, as well as density and moisture content measurements, were conducted on the sawdust. Additionally, to assess the functionality of this thermal insulator, the material was applied using the blowing technique in partitions, followed by physical tests. The results indicate that the proposed insulation material has thermal stability up to 270 °C. The thermal conductivity was comparable to conventional mineral wool and fiberglass (0.042–0.048 [W/mK]). The density ranged from 123.77 to 198.15 [kg/m³] depending on the filling time of the specimens but remained low compared to other organic materials. The moisture content was 11.31%, suitable for maintaining good thermal conductivity. This study concludes that sawdust is a viable alternative for thermal insulation, especially when applied through blowing. Its stability and thermal conductivity are comparable to conventional materials, while its thermal inertia is 200% higher than that of glass wool. Furthermore, the low moisture content suggests that there would be no proliferation of pathogens, making it a promising thermal insulator for sustainable construction development. Finally, it is mentioned that the material carbonizes within a limited time, leading to self-extinguishment of the flame.

Исследование условий теплового самовозгорания тяжелых углеводородов (на примере битумов) на развитой поверхности волокнистой негорючей теплоизоляции

Experimental and analytical studies of thermal spontaneous combustion of substances of heavy oil fraction distilling (fuel oil, bitumen, tar) when contacting with a developed surface of non-flammable fibrous (such as slag and glass wool, fiberglass) material of thermal insulation of a tank have been conducted based on the example of bitumen. Experimental studies and calculations have shown that on the developed surface of fibrous materials impregnated with bitumen, the process of bitumen decomposition involving the generation of thermal and thermal-oxidative degradation products of heavy hydrocarbons able to auto-ignite (ignite spontaneously on the developed non-flammable fibrous surface) or ignite in case of availability of ignition source is possible under certain conditions at relatively low temperatures (~120 °С and lower), i.e., at temperatures close to the maximum process temperature (~180 °С) and significantly lower temperatures compared to the temperature of spontaneous ignition of bitumen (~330–380 °С). The calculations of thermal flows have shown how (via what methods) the thermal conductivity of thermal insulation impregnated with bitumen can be improved and, thereby, the probability of its spontaneous combustion can be reduced or prevented. Based on experimental and analytical studies and calculations, the proposals for preventing spontaneous combustion of thermal insulation materials of storage tanks for bitumen and other hydrocarbons of high distillation of petroleum products have been formulated.

A multi-criteria decision-making method for thermal insulation material selection in nZEB level questioned affordable multifamily housings

An affordable multifamily housing building archetype project was researched to improve the building envelope’s thermo-physical performance based on thermal insulation configurations to optimize the energy use, life-cycle cost, environmental impact, and thermal comfort with questioning nZEB concept. Five thermal insulation materials as extruded polystyrene (XPS), expanded polystyrene (EPS), rockwool (RW), glass wool (GW), and cellular glass (CG), were studied with four> attribute variations (thermal comfort, density, embodied carbon, and embodied energy) and five thickness variations (0.04, 0.08, 0.12, 0.16, 0.20 m). A total of 100 alternative scenarios> were obtained for the decision-making process, with four performance criteria to be evaluated in terms of energy, cost, thermal comfort, and environmental impact. Equal weights method (EWM), weighted sum method (WSM), and analytical hierarchy process (AHP) were examined for the multi-criteria decision-making among 46 scenariosvel. The analysis beyond the cost-optimal energy efficiency level, which varies between 64.89 and 72.62 kWh/m2a for primary energy use with a potential 10% further reduction, ensures the European Commission’s recommendations that target 50–70 kWh/m2a of primary energy use for housings in the continental climate to achieve nZEB. The best scenarios cover significantly the XPS at the head due to lover investment costs, where RW, GW, and EPS are followed among the best 10 scenarios, respectively. Besides, AHP provides a more effective distribution of weighting factors than the WSM where the best scenarios of the AHP covers 12 cm thermal insulation alternatives by balancing the investment costs and energy efficiency levels. The paper provides insight into thermal insulation material selection while searching for the advantages and priorities of thermal insulation materials’ attributes beyond the cost-optimal energy efficiency level to reach the nZEB range.

Non-destructive reverberant testing of natural fibrous samples in a diffused acoustic field environment

A hexahedron reverberation box was utilized to measure the reverberation time of samples in a diffuse acoustic field. The aim of this study is to design a mathematical model that accurately represents the correlation between frequency and absorption coefficient for analysis. The same was obtained by aligning the noise absorption coefficients (NACs) determined through an impedance tube and calculated based on the reverberation time. The analysis indicated that jute fiber exhibits superior performance compared to other natural fibers, such as rock and glass wool, in the attenuation of sound frequencies above 2200 Hz. The results motivated further investigation over jute nonwoven fabric to conduct layer analysis (1–7) and to examine the impact of thickness. Thereby, a dataset was compiled consisting of 11 fibrous samples (nine natural and two commercial fibers) and jute nonwoven fabric. The empirical model was developed regardless of the type of fiber or thickness of the nonwoven fabric, and it was successfully validated for three additional fibers (banana, pineapple, and ramie). The predictive model exhibited a high level of accuracy in estimating the NAC, displaying a strong similarity to that of impedance tube measurements. The achieved mean absolute error ranges for the predictions are between 0.02 and 0.03 only. The main discovery of this study revolves around the recognition of frequency of sound as a crucial variable and its application in predicting the NAC for the samples.

Mechanical and Morphological Analysis of Aramid Fiber (PPTA), Glass Wool (GW), Aluminum (Al), and Silicon Carbide (SiC) Particles Embedded High-density Polyethylene (HDPE) Hybrid Composites

Introduction: Composite research is adopting innovative materials in the current period due to their better qualities, such as being lightweight, having excellent mechanical properties, being relatively inexpensive, having a low coefficient of thermal expansion, etc. Method: Composite materials play a crucial part in this challenge, with the fast market growth for lightweight and high-performance materials. In the present research, different weight percentages of aramid fiber, glass wool, aluminum, and silicon carbide-reinforced high-density polyethylene hybrid composite are introduced. The degree of adhesion between the matrix and reinforcement was determined through microstructural investigation utilizing an optical and scanning electronic microscope. Result: Mechanical properties (tensile behaviors, flexural behavior, impact strength and hardness property) of the fabricated composites are investigated. Comparative study of mechanical properties for different combinations of fabricated composites reveals an increase in elongation at break, flexural strength, flexural modulus and hardness, while tensile strength and impact strength have decreased sequentially from 5 to 40 wt.%. Conclusion: The mechanical properties of HDPE-PPTA-GW-Al-SiC hybrid composites obtained at 40 wt.% PPTA [Poly (p-phenylene terephthalamide)], GW (glass wool), Al, and SiC powder loading are superior as compared to other hybrid composites.

Research on the Performance of Sound Absorption Materials for Substations in Power Grid

As the environmental protection policies become increasingly strict, higher requirements will be proposed for low-frequency noise control problems, and research on control strategies for low-frequency noise in substations is imperative. In this work, principles of resistive acoustic absorption and resonance acoustic absorption materials were analyzed. Based on the measurement in acoustic impedance tubes, the sound absorption performances of two typical sound absorption materials, the glass wool and the micro-perforated panel, were tested. This study offers a new reference for power grid companies to select and combines suitable acoustic materials to realize the optimal application in substations based on noise reduction requirements of different frequencies.

Use of metamaterials to reduce underwater noise generated by ship machinery

Reducing underwater noise pollution from ship machinery is a significant challenge. Ship machinery usually operates at fixed speeds and emits tonal noise with large amplitudes at low frequencies. Conventional soundproofing materials are inadequate for absorbing tonal noise and require large thicknesses at low frequencies. Quarter-wavelength resonators effectively absorb sound at their fundamental frequency and odd harmonics. Still, the applicability of this solution is nevertheless limited by its length requirement, which becomes cumbersome at low frequencies and, thus, large wavelengths. This study explores different structured metamaterial designs based on labyrinth, coiled quarter-wavelength resonators, and hybrid configurations combining glass wool and coiled resonators. Analytical, numerical calculations, and experimental tests are carried out under normal plane wave incidence (using an impedance tube) and a diffuse acoustic field (in a small reverberant cabin). In particular, a numerical optimization based on a periodic unit cell model is used to optimize the hybrid configuration and analyze its behavior under variable plane wave incidence angles. Preliminary tests conducted in a water basin using a small, straightforward aluminum box equipped with some proposed designs indicate reductions in underwater noise levels. The proposed solutions offer limited-cost and compact solutions for mitigating machinery noise and, potentially, the preservation of marine ecosystems.

Eco-friendly Noise-absorbing Panels from Waste Materials: A Sustainable Solution to Control Noise Pollution

This research article deals with one of the major forms of pollution that is invisible but is a threat to living beings. Controlling noise pollution is important so to deal with this, a test was performed using a method known as the impedance tube method. To tackle this noise pollution a sustainable material would be good to use, so waste coming from food industries such as orange peel, sugarcane husk, and eggshells are used with newspaper sludge as a binding material. Disks were prepared of 90mm with different constituents of waste material and paper sludge. The test result showed that these panels were able to reduce sound coming from the source to the receiver side. Sound absorption capacity is different for every material depending upon their structural features. The test was done with 120 decibels of sound and at 120 decibels the SAC (sound absorption coefficient) was 0.35 which is better than other commercially available chemical-infused materials such as glass wool, mineral wool etc. As they are not better for the environment as well as living around. They cause lung disease if inhaled and skin problems come in contact with them. Materials in use for soundproofing have polyurethane which releases a high amount of smoke if brunt hence we cannot rely on this in case of fire. Hence environmentally friendly as well as materials that do not catch fire or realise high amounts of smoke and are also cost-effective should be used to reduce noise pollution in the environment we are living in.

Two common pitfalls in the analysis of water-stable isotopologues with cryogenic vacuum extraction and cavity ring-down spectroscopy.

Water stable isotopologue analysis is widely used to disentangle ecohydrological processes. Yet, there are increasing reports of measurement uncertainties for established and emerging methods, such as cryogenic vacuum extraction (CVE) or cavity ring-down spectroscopy (CRDS). With this study, we investigate two pitfalls, that potentially contribute to uncertainties in water-stable isotopologue research. To investigate fractionation sources in CVE, we extracted pure water of known isotopic composition with cotton, glass wool or without cover and compared the isotopologue results with non-extracted reference samples. To characterise the dependency of δ2H and δ18O on the water mixing ratio in CRDS, which is of high importance for in-situ applications with large natural variations in mixing ratios, we chose samples with a large range of isotopic compositions and determined δ2H and δ18O for different water mixing ratios with two CRDS analysers (Picarro, Inc.). Cotton wool had a strong fractionation effect on δ2H values, which increased with more 2H-enriched samples. δ2H and δ18O values showed a strong dependency on the water mixing ratio analysed with CRDS with differences of up to 34.5‰ (δ2H) and 3.9‰ (δ18O) for the same sample at different mixing ratios. CVE and CRDS, now routinely applied in water stable isotopologue research, come with pitfalls, namely fractionation effects of cover materials and water mixing ratio dependencies of δ2H and δ18O, which can lead to erroneous isotopologue results and thus, invalid conclusions about (ecohydrological) processes. These practical issues identified here should be reported and addressed adequately in water-stable isotopologue research.

Study of Steam Generation and Distribution in a Hospital to Improve Energy Efficiency Using Thermography, Ultrasound, and Gas Analyzer

This investigation analyzed the energy efficiency of a steam system in a hospital, considering the procedure in ASME EA-3-2009 standard. The obtained boiler energy efficiency was 80.29 %, by applying an energy balance, reaching 15.33 kW for heat losses in the distribution pipes. Two consistent improvement alternatives were proposed, starting by unifying the pipe diameter of the kitchen area of 5 m, generating a reduction of heat loss from 828 to 600 W, which represented a total annual energy saving of around 2.4 GJ/year. The investment cost is USD 47.40, considering the achievement of the break-even point after 9 months, where the insulation of the pipes with glass wool was considered second and it generated a reduction in losses of 5.98 kW, representing a total annual energy saving of about 62.91 GJ/year, which corresponds to approximately USD 1,672. The investment for pipe insulation with a length of 49 m was USD 462, considering the NPV calculation and the possible savings, and the break-even point was reached after approximately 4 months, indicating the economic benefit of applying the two improvement options proposed.

Thermal Performance of Residential Roofs in Malaysia: Experimental Study Using an Indoor Solar Simulator

Previous researchers have detailed the problems in measuring the thermal resistance value of a whole roof assembly under hot conditions due to the uncertainty of the outdoor environment. Currently, no established method exists to experimentally investigate an entire thermal roof performance under a steady-state condition. This article details the properties of the indoor solar simulator and the research methods undertaken to measure the thermal resistance value of roof assembly. The indoor solar simulator utilizes 40 halogen bulbs to accurately replicate sun radiation. Thermocouples and heat flux sensors are installed at several locations on the roof assembly to quantify the heat transmission occurring through it. The thermal resistance value is determined by adding up the average difference in temperature across the external and internal roof surfaces and dividing the total amount by the total of all averaged heat fluxes. Subsequently, this study investigates the thermal efficiency of residential roof assemblies that comprise various insulation materials frequently employed in Malaysia, including stone wool, mineral glass wool, reflective bubble foil insulation, and radiant barriers. The analysis showed that the roof configurations with bubble foil reflective insulation produce superior thermal resistance values when coupled with enclosed air space or mass insulation, with thermal resistance values ranging between 2.55 m2K/W and 3.22 m2K/W. It can be concluded that roof configurations with bubble foil reflective insulation resulted in high total thermal resistance and passed the minimum thermal resistance value of 2.5 m2K/W under the Malaysian Uniform Building By-Law 38 (A) requirements. Furthermore, the radiant barrier produced a high thermal resistance value of 2.50 m2K/W when installed parallel to a 50 mm enclosed air space, emphasising the crucial function of an enclosed air space next to a reflective foil to resist the incoming heat radiation. The findings from this research can help building professionals determine the optimum insulation for residential building roofs in Malaysia.

Energy efficiency of a house in Mediterranean region: insulation and glazing impact

The insulation of a building's envelope is critical for reducing energy consumption, enhancing indoor thermal comfort, and achieving sustainable development goals. This theoretical work focused on the energy and thermal aspect of insulators and glazing to determine the optimal thermal insulation and the best glazing for the building envelope in the Mediterranean region where the province of Ain Temouchent, Algeria, was taken in this study. This study evaluated the effectiveness of insulation materials, which are expanded polystyrene, glass wool, rock wool, and wood fiber of varying thicknesses, and glazing in the Algerian market. The TRNSYS 17 software is used to simulate the building's behavior. The study finds that wood fiber insulation with a 9 cm thickness provides the best thermal performance, resulting in a 26% reduction in energy costs compared to 3cm of expanded polystyrene. Furthermore, upgrading from single to double glazing can reduce heating and cooling costs by 23% and 10%, respectively, demonstrating the importance of proper insulation and glazing in achieving energy efficiency, and enhancing indoor thermal comfort for occupants. In conclusion, this study provides valuable findings for designing energy-efficient buildings with optimal thermal insulation and glazing. Future research should explore broader factors affecting building performance, such as the long-term performance and durability of materials in varying climates and building designs, as well as the impact of occupancy and building orientation. Although the study acknowledges its limited examination of factors and options, it still provides valuable insights into building performance with insulation and glazing.

Optimizing Acoustic Performance: Electrospun Polycaprolactone Fiber Mat Associated with Melamine Foam and Fiber Glass Wool

Optimizing Acoustic Performance: Electrospun Polycaprolactone Fiber Mat Associated with Melamine Foam and Fiber Glass Wool