Abstract
Sandwich panels are extensively used in the construction industry because of their superior thermal insulation performance and ease of installation. However, panels with combustible cores are prone to fire, whereas those with mineral-based cores exhibit lower thermal insulation capabilities. Therefore, to address these limitations, this study proposed a composite core approach to enhance both fire resistance and thermal insulation performance. A surface layer incorporated phenolic foam (PF), which fulfilled the fire resistance requirements and delivered excellent thermal insulation properties, and 30–40 mm of glass wool (GW) and mineral wool (MW) with exceptional fire resistance were applied. The heterogeneous core sandwich panels exhibited excellent flame-retardant performance, with a maximum peak heat release rate of 0.712 kW/m2 and a total heat release of 0.18 MJ/m2. This satisfied the semi-non-combustible flame retardancy level and ensured sufficient time for residents to evacuate safely. Moreover, based on its low thermal transmittance of 0.114–0.125 W/m2·K, when applied to warehouse-type buildings, heating energy consumption was reduced by approximately 10 % compared to sandwich panels based on inorganic core GW and MW. Heterogeneous core sandwich panels can exhibit excellent flame retardancy and thermal performance owing to the use of inorganic materials and PF, respectively.
Sign-in/Register to access full text options 
Talk to us
Join us for a 30 min session where you can share your feedback and ask us any queries you have
Schedule a callDisclaimer: All third-party content on this website/platform is and will remain the property of their respective owners and is provided on "as is" basis without any warranties, express or implied. Use of third-party content does not indicate any affiliation, sponsorship with or endorsement by them. Any references to third-party content is to identify the corresponding services and shall be considered fair use under The CopyrightLaw.
