Germ Band Extension Research Articles

Expression of teneurin-m/odd Oz during segmentation in the beetle Tribolium castaneum

The pair-rule gene teneurin-m/odd Oz (ten-m/odz) is required for the patterning of alternate segment boundaries in the early Drosophila embryo. Mutant phenotypes of ten-m/odz display a typical pair-rule phenotype in which odd-numbered segments are eliminated. Consistent with its pair-rule function, Ten-m/Odz protein is expressed in a seven-stripe pattern before the onset of gastrulation. While expression of ten-m/odz orthologues have been characterized in several vertebrate species, their expression patterns in non-Drosophila arthropods during embryonic segmentation have yet to be reported. Here, we have identified a Tribolium orthologue of ten-m/odz (Tc-ten-m/odz) and analyzed its expression patterns during embryonic segmentation. Tc-ten-m/odz expression was observed in a region of the growth zone, which appeared to be a potential mesodermal region, during germband elongation. Later, segmental expression appeared in the trunk after segments had already formed. In contrast to Drosophila, apparently Tc-ten-m/odz was neither expressed in the ectoderm of the growth zone where segmentation occurs, nor the ectoderm of trunk regions where segmentation is maintained. Our findings suggest that Tc-ten-m/odz may not function as a pair rule gene in Tribolium segmentation.

Modeling cell intercalation during Drosophila germband extension

Germband extension during Drosophila development is primarily driven by cell intercalation, which involves three key components: planar cell polarity, anisotropic myosin contractile forces on cellular junctions, and cellular deformation and movement. Prior experimental work probed each of these factors in depth, but the connection between them remains unclear. This paper presents an integrated chemomechanical model that combines the three factors into a coherent mathematical framework for studying cell intercalation in the germband tissue. The model produces the planar cell polarization of key proteins, including Rho-kinase, Bazooka and myosin, the development of anisotropic contractile forces, and subsequent cell deformation and rearrangement. Cell intercalation occurs through T1 transitions among four neighboring cells and rosettes involving six cells. Such six-cell rosettes entail stronger myosin-based contractile forces, and on average produce a moderately larger amount of germband extension than the T1 transitions. The resolution of T1 and rosettes is driven by contractile forces on junctions anterior and posterior to the assembly as well as the pulling force of the medial myosin in the anterior and posterior cells. The global stretching due to posterior midgut invagination also plays a minor role. These model predictions are in reasonable agreement with experimental observations.

Vertex sliding drives intercalation by radial coupling of adhesion and actomyosin networks during Drosophila germband extension.

Oriented cell intercalation is an essential developmental process that shapes tissue morphologies through the directional insertion of cells between their neighbors. Previous research has focused on properties of cell-cell interfaces, while the function of tricellular vertices has remained unaddressed. Here, we identify a highly novel mechanism in which vertices demonstrate independent sliding behaviors along cell peripheries to produce the topological deformations responsible for intercalation. Through systematic analysis, we find that the motion of vertices connected by contracting interfaces is not physically coupled, but instead possess strong radial coupling. E-cadherin and Myosin II exist in previously unstudied populations at cell vertices and undergo oscillatory cycles of accumulation and dispersion that are coordinated with changes in cell area. Additionally, peak enrichment of vertex E-cadherin/Myosin II coincides with interface length stabilization. Our results suggest a model in which asymmetric radial force balance directs the progressive, ratcheted motion of individual vertices to drive intercalation.

A revised understanding of Tribolium morphogenesis further reconciles short and long germ development.

In Drosophila melanogaster, the germband forms directly on the egg surface and solely consists of embryonic tissue. In contrast, most insect embryos undergo a complicated set of tissue rearrangements to generate a condensed, multilayered germband. The ventral side of the germband is embryonic, while the dorsal side is thought to be an extraembryonic tissue called the amnion. While this tissue organisation has been accepted for decades and has been widely reported in insects, its accuracy has not been directly tested in any species. Using live cell tracking and differential cell labelling in the short germ beetle Tribolium castaneum, I show that most of the cells previously thought to be amnion actually give rise to large parts of the embryo. This process occurs via the dorsal-to-ventral flow of cells and contributes to germband extension (GBE). In addition, I show that true ‘amnion’ cells in Tribolium originate from a small region of the blastoderm. Together, my findings show that development in the short germ embryos of Tribolium and the long germ embryos of Drosophila is more similar than previously proposed. Dorsal-to-ventral cell flow also occurs in Drosophila during GBE, and I argue that the flow is driven by a conserved set of underlying morphogenetic events in both species. Furthermore, the revised Tribolium fate map that I present is far more similar to that of Drosophila than the classic Tribolium fate map. Lastly, my findings show that there is no qualitative difference between the tissue structure of the cellularised blastoderm and the short/intermediate germ germband. As such, the same tissue patterning mechanisms could function continuously throughout the cellularised blastoderm and germband stages, and easily shift between them over evolutionary time.

Morphogenetic movements affect local tissue organisation during embryonic Drosophila morphogenesis

Tissues and organs undergo extensive remodelling to reach their final morphology and physiological activity. The genetic programs underlying tissue formation are well studied, but less is known about how this formation is influenced by extrinsic forces derived from other concomitant morphogenetic events. Here we address this question in Drosophila melanogaster. We analyse tissue organisation in the embryonic epidermis at stage 10 by computational tissue segmentation methods to provide a quantitative description of packing. We find that the epidermis adopts different organisations along the dorso-ventral axis that correlate with differences in cell density. We analyse the contribution of three morphogenetic events that take place right before or concomitant to this period of embryogenesis, neuroblast delamination, asynchronous postblastoderm cell divisions and germ band extension, and we find that they all exert an influence on the packing of the epidermis. We previously described that the apical determinant Crumbs accumulates differentially in the epidermis along the dorso-ventral axis. Here we find that this differential accumulation of Crumbs correlates with the differential tissue packing. Perturbation of the three mentioned morphogenetic events also modulate Crumbs differential accumulation, suggesting that Crb could act as a read-out of tissue organisation. We also previously showed that Crb plays a role in regulating cell architecture. Now we find that it is also required for proper packing of the embryonic epidermis. In summary, here we uncover an intimate relationship between morphogenetic events and cell packing within a tissue that is dependent on surrounding cell density. Furthermore we find that this morphogenetically-regulated tissue packing modulates the key cell polarity protein Crumbs, which in turn is required for tissue packing, suggesting that it may participate in the molecular mechanism/s underlying the described tissue organisation.

A Preferred Curvature-Based Continuum Mechanics Framework for Modeling Embryogenesis

Mechanics plays a key role in the development of higher organisms. However, understanding this relationship is complicated by the difficulty of modeling the link between local forces generated at the subcellular level and deformations observed at the tissue and whole-embryo levels. Here we propose an approach first developed for lipid bilayers and cell membranes, in which force-generation by cytoskeletal elements enters a continuum mechanics formulation for the full system in the form of local changes in preferred curvature. This allows us to express and solve the system using only tissue strains. Locations of preferred curvature are simply related to products of gene expression. A solution, in that context, means relaxing the system’s mechanical energy to yield global morphogenetic predictions that accommodate a tendency toward the local preferred curvature, without a need to explicitly model force-generation mechanisms at the molecular level. Our computational framework, which we call SPHARM-MECH, extends a 3D spherical harmonics parameterization known as SPHARM to combine this level of abstraction with a sparse shape representation. The integration of these two principles allows computer simulations to be performed in three dimensions on highly complex shapes, gene expression patterns, and mechanical constraints. We demonstrate our approach by modeling mesoderm invagination in the fruit-fly embryo, where local forces generated by the acto-myosin meshwork in the region of the future mesoderm lead to formation of a ventral tissue fold. The process is accompanied by substantial changes in cell shape and long-range cell movements. Applying SPHARM-MECH to whole-embryo live imaging data acquired with light-sheet microscopy reveals significant correlation between calculated and observed tissue movements. Our analysis predicts the observed cell shape anisotropy on the ventral side of the embryo and suggests an active mechanical role of mesoderm invagination in supporting the onset of germ-band extension.

Actomyosin pulsation and flows in an active elastomer with turnover and network remodeling

Tissue remodeling requires cell shape changes associated with pulsation and flow of the actomyosin cytoskeleton. Here we describe the hydrodynamics of actomyosin as a confined active elastomer with turnover of its components. Our treatment is adapted to describe the diversity of contractile dynamical regimes observed in vivo. When myosin-induced contractile stresses are low, the deformations of the active elastomer are affine and exhibit spontaneous oscillations, propagating waves, contractile collapse and spatiotemporal chaos. We study the nucleation, growth and coalescence of actomyosin-dense regions that, beyond a threshold, spontaneously move as a spatially localized traveling front. Large myosin-induced contractile stresses lead to nonaffine deformations due to enhanced actin and crosslinker turnover. This results in a transient actin network that is constantly remodeling and naturally accommodates intranetwork flows of the actomyosin-dense regions. We verify many predictions of our study in Drosophila embryonic epithelial cells undergoing neighbor exchange during germband extension.

Contribution of cell proliferation to axial elongation in the red flour beetle Tribolium castaneum.

Most arthropods generate their posterior bodies by adding segments periodically, as the embryo grows, from a posteriorly located region called the segment addition zone. This mode of segmentation is shared with vertebrates and relies on oscillatory mechanisms, where the temporal periodicity of a clock is translated into repetitive spatial patterns. This ordered anterior-to-posterior pattern is achieved at the same time as the tissue elongates, opening the question of the functional coordination between the mechanisms of segmental patterning and posterior growth. The study of these processes in different arthropods has played an important role in unravelling some of the molecular mechanisms of segment formation. However, the behavior of cells during elongation and how cellular processes affect this segmental patterning has been poorly studied. Cell proliferation together with cell rearrangements are presumed to be the major forces driving axis elongation in the red flour beetle Tribolium castaneum. However, there still no strong evidence about the role and distribution of cell proliferation within the embryo. In this study, we propose to address these questions by using whole embryo cultures and pharmacological manipulation. We show that considerable cell proliferation occurs during germband elongation, measured by incorporation of the nucleoside analog of thymidine 5-Ethynyl-2’-deoxyuridine, EdU. Moreover, proliferating cells appeared to be spread along the elongating embryo with a posterior bias at early segmentation. In addition, when we blocked cell division, treated germbands were always shorter than controls and in some cases not able to fully elongate, even when control embryos already started to retract and leg buds are evident. Finally, we found that the absence of cell proliferation has no apparent effect on segmental patterning, as evidenced by Tc-engrailed (Tc-en) gene expression.

Models of convergent extension during morphogenesis.

Convergent extension (CE) is a fundamental and conserved collective cell movement that forms elongated tissues during embryonic development. Thus far, studies have demonstrated two different mechanistic models of collective cell movements during CE. The first, termed the crawling mode, was discovered in the process of notochord formation in Xenopus laevis embryos, and has been the established model of CE for decades. The second model, known as the contraction mode, was originally reported in studies of germband extension in Drosophila melanogaster embryos and was recently demonstrated to be a conserved mechanism of CE among tissues and stages of development across species. This review summarizes the two modes of CE by focusing on the differences in cytoskeletal behaviors and relative expression of cell adhesion molecules. The upstream molecules regulating these machineries are also discussed. There are abundant studies of notochord formation in X. laevis embryos, as this was one of the pioneering model systems in this field. Therefore, the present review discusses these findings as an approach to the fundamental biological question of collective cell regulation. WIREs Dev Biol 2018, 7:e293. doi: 10.1002/wdev.293This article is categorized under: 1Early Embryonic Development > Gastrulation and Neurulation2Comparative Development and Evolution > Model Systems

Myosin II is not required for Drosophila tracheal branch elongation and cell intercalation

The Drosophila tracheal system consists of an interconnected network of monolayered epithelial tubes that ensures oxygen transport in the larval and adult body. During tracheal dorsal branch (DB) development, individual DBs elongate as a cluster of cells, led by tip cells at the front and trailing cells in the rear. Branch elongation is accompanied by extensive cell intercalation and cell lengthening of the trailing stalk cells. While cell intercalation is governed by Myosin II (MyoII)-dependent forces during tissue elongation in the Drosophila embryo leading to germ-band extension, it remained unclear whether MyoII plays a similar active role during tracheal branch elongation and intercalation. Here, we use a nanobody-based approach to selectively knock-down MyoII in tracheal cells. Our data shows that despite the depletion of MyoII function, tip cells migration and stalk cell intercalation (SCI) proceeds at a normal rate. Therefore, our data confirms a model in which DB elongation and SCI in the trachea occurs as a consequence of tip cell migration, which produces the necessary forces for the branching process.

Myosin II is not required for Drosophila tracheal branch elongation and cell intercalation.

The Drosophila tracheal system consists of an interconnected network of monolayered epithelial tubes that ensures oxygen transport in the larval and adult body. During tracheal dorsal branch (DB) development, individual DBs elongate as a cluster of cells, led by tip cells at the front and trailing cells in the rear. Branch elongation is accompanied by extensive cell intercalation and cell lengthening of the trailing stalk cells. Although cell intercalation is governed by Myosin II (MyoII)-dependent forces during tissue elongation in the Drosophila embryo that lead to germ-band extension, it remained unclear whether MyoII plays a similar active role during tracheal branch elongation and intercalation. Here, we have used a nanobody-based approach to selectively knock down MyoII in tracheal cells. Our data show that, despite the depletion of MyoII function, tip cell migration and stalk cell intercalation (SCI) proceed at a normal rate. This confirms a model in which DB elongation and SCI in the trachea occur as a consequence of tip cell migration, which produces the necessary forces for the branching process.

Basolateral protrusion and apical contraction cooperatively drive Drosophila germband extension

Basolateral protrusion and apical contraction cooperatively drive Drosophila germband extension

Basolateral protrusion and apical contraction cooperatively drive Drosophila germ-band extension.

Throughout development, tissues undergo complex morphological changes, resulting from cellular mechanics that evolve over time and in three-dimensional space. During Drosophila germ-band extension (GBE), cell intercalation is the key mechanism for tissue extension, and the associated apical junction remodelling is driven by polarized myosin-II-dependent contraction. However, the contribution of the basolateral cellular mechanics to GBE remains poorly understood. Here, we characterize how cells coordinate their shape from the apical to the basal side during rosette formation, a hallmark of cell intercalation. Basolateral rosette formation is driven by cells mostly located at the dorsal/ventral part of the rosette (D/V cells). These cells exhibit actin-rich wedge-shaped basolateral protrusions and migrate towards each other. Surprisingly, the formation of basolateral rosettes precedes that of the apical rosettes. Basolateral rosette formation is independent of apical contractility, but requires Rac1-dependent protrusive motility. Furthermore, we identified Src42A as a regulator of basolateral rosette formation. Our data show that in addition to apical contraction, active cell migration driven by basolateral protrusions plays a pivotal role in rosette formation and contributes toGBE.

Conservation and variation in pair-rule gene expression and function in the intermediate-germ beetle Dermestes maculatus.

A set of pair-rule (PR) segmentation genes (PRGs) promotes the formation of alternate body segments in Drosophila melanogaster Whereas Drosophila embryos are long-germ, with segments specified more or less simultaneously, most insects add segments sequentially as the germband elongates. The hide beetle Dermestes maculatus represents an intermediate between short- and long-germ development, ideal for comparative study of PRGs. We show that eight of nine Drosophila PRG orthologs are expressed in stripes in Dermestes Functional results parse these genes into three groups: Dmac-eve, -odd and -run play roles in both germband elongation and PR patterning; Dmac-slp and -prd function exclusively as complementary, classic PRGs, supporting functional decoupling of elongation and segment formation; and orthologs of ftz, ftz-f1, h and opa show more variable function in Dermestes and other species. While extensive cell death generally prefigured Dermestes PRG RNAi-mediated cuticle defects, an organized region with high mitotic activity near the margin of the segment addition zone is likely to have contributed to truncation of eveRNAi embryos. Our results suggest general conservation of clock-like regulation of PR stripe addition in sequentially segmenting species while highlighting regulatory rewiring involving a subset of PRG orthologs.

Forces directing germ-band extension in Drosophila embryos.

Body axis elongation by convergent extension is a conserved developmental process found in all metazoans. Drosophila embryonic germ-band extension is an important morphogenetic process during embryogenesis, by which the length of the germ-band is more than doubled along the anterior-posterior axis. This lengthening is achieved by typical convergent extension, i.e. narrowing the lateral epidermis along the dorsal-ventral axis and simultaneous extension along the anterior-posterior axis. Germ-band extension is largely driven by cell intercalation, whose directionality is determined by the planar polarity of the tissue and ultimately by the anterior-posterior patterning system. In addition, extrinsic tensile forces originating from the invaginating endoderm induce cell shape changes, which transiently contribute to germ-band extension. Here, we review recent progress in understanding of the role of mechanical forces in germ-band extension.

Evo–Devo: Universal Toll Pass for the Extension Highway?

The distinction between long-germ and short-germ insects is a classic one in evo-devo, yet a common genetic mechanism may underlie germband extension in all insects, even all arthropods.

Toll Genes Have an Ancestral Role in Axis Elongation

One of the key morphogenetic processes used during development is the controlled intercalation of cells between their neighbors. This process has been co-opted into a range of developmental events, and it also underlies an event that occurs in each major group of bilaterians: elongation of the embryo along the anterior-posterior axis [1]. In Drosophila, a novel component of this process was recently discovered by Paré etal., who showed that three Toll genes function together to drive cell intercalation during germband extension [2]. This finding raises the question of whether this role of Toll genes is an evolutionary novelty of flies or a general mechanism of embryonic morphogenesis. Here we show that the Toll gene function in axis elongation is, in fact, widely conserved among arthropods. First, we functionally demonstrate that two Toll genes are required for cell intercalation in the beetle Tribolium castaneum. We then show that these genes belong to a previously undescribed Toll subfamily and that members of this subfamily exhibit striped expression (as seen in Tribolium and previously reported in Drosophila [3-5]) in embryos of six other arthropod species spanning the entire phylum. Last, we show that two of these Toll genes are required for normal morphogenesis during anterior-posterior embryo elongation in the spider Parasteatoda tepidariorum, a member of the most basally branching arthropod lineage. From our findings, we hypothesize that Toll genes had a morphogenetic function in embryo elongation in the last common ancestor of all arthropods, which existed over 550 million years ago.

Unipolar distributions of junctional Myosin II identify cell stripe boundaries that drive cell intercalation throughout Drosophila axis extension.

Convergence and extension movements elongate tissues during development. Drosophila germ-band extension (GBE) is one example, which requires active cell rearrangements driven by Myosin II planar polarisation. Here, we develop novel computational methods to analyse the spatiotemporal dynamics of Myosin II during GBE, at the scale of the tissue. We show that initial Myosin II bipolar cell polarization gives way to unipolar enrichment at parasegmental boundaries and two further boundaries within each parasegment, concomitant with a doubling of cell number as the tissue elongates. These boundaries are the primary sites of cell intercalation, behaving as mechanical barriers and providing a mechanism for how cells remain ordered during GBE. Enrichment at parasegment boundaries during GBE is independent of Wingless signaling, suggesting pair-rule gene control. Our results are consistent with recent work showing that a combinatorial code of Toll-like receptors downstream of pair-rule genes contributes to Myosin II polarization via local cell-cell interactions. We propose an updated cell-cell interaction model for Myosin II polarization that we tested in a vertex-based simulation.

Amnioserosa development and function in Drosophila embryogenesis: Critical mechanical roles for an extraembryonic tissue.

Despite being a short-lived, extraembryonic tissue, the amnioserosa plays critical roles in the major morphogenetic events of Drosophila embryogenesis. These roles involve both cellular mechanics and biochemical signaling. Its best-known role is in dorsal closure-well studied by both developmental biologists and biophysicists-but the amnioserosa is also important during earlier developmental stages. Here, we provide an overview of amnioserosa specification and its role in several key developmental stages: germ band extension, germ band retraction, and dorsal closure. We also compare embryonic development in Drosophila and its relative Megaselia to highlight how the amnioserosa and its roles have evolved. Placed in context, the amnioserosa provides a fascinating example of how signaling, mechanics, and morphogen patterns govern cell-type specification and subsequent morphogenetic changes in cell shape, orientation, and movement. Developmental Dynamics 245:558-568, 2016. © 2016 Wiley Periodicals, Inc.

Automated Image Analysis Reveals Spatially-Regulated Cell Division Dynamics during Drosophila Axis Elongation

Axis elongation is a conserved process in which embryos extend their head-to-tail or anterior-posterior (AP) axis. Defective axis elongation results in developmental malformations, including spina bifida and anencephaly. In Drosophila, axis elongation occurs in an epithelial monolayer known as the germband. Cells on the anterior end of the germband divide, but the contribution of anterior cell divisions to axis elongation is unknown. We used spinning disk confocal microscopy to investigate anterior cell divisions during germband extension in Drosophila embryos expressing fluorescently-tagged proteins that label cell outlines. To automate the quantification of cell division dynamics, we developed an image analysis algorithm to segment and track cells from confocal microscopy sequences. One seed point was identified per cell in the first image of the sequence using an adaptive threshold. Seeds were interactively edited when necessary. The watershed algorithm was used to expand seeds until they delineated cells. Seeds were automatically transferred to the next image in the sequence, correcting for cell movement by using the local cross-correlation maximum between consecutive images to shift the seeds. Dividing cells were automatically detected based on their increased area and circularity, and final dumbbell morphology. Seeds corresponding to dividing cells were split into two equidistant seeds along the longest cell axis. We found that 84.3±4.0% of anterior cells immediately adjacent to the ventral midline (ventral cells) divided within 45° of the AP axis. In contrast, anterior cells away from the midline (lateral cells) divided at random orientations. Cell shape analysis revealed that ventral cells rotated 32.5±3.0° before cell division to align their longest axis with the AP axis, while lateral cells did not undergo a similar rotation. Together, our data strongly suggest that the mechanisms that promote oriented cell division are spatially regulated.