Gas Loss Research Articles

Buffel grass pre-dried as a modulator of the fermentation, nutritional and aerobic stability profile of cactus pear silage

ABSTRACT This study aimed to evaluate fermentation losses and the fermentation profile of cactus pear silage with buffel grass pre-dried. Five levels of inclusion of buffel grass pre-dried in cactus pear silage (0%; 15%; 25%; 35% and 45% on a dry matter basis) were evaluated with 6 replications, in a completely randomised design. After 90 storage days, silos were opened and silages were analysed. The density, effluent losses, buffering capacity, flieg index, mineral matter, organic matter, crude protein, total carbohydrates and total digestible nutrients content were quadratically influenced (P < 0.05) of the inclusion of buffel grass pre-dried in cactus pear silage. The inclusion of buffel grass pre-dried promoted a decreasing on gas losses, maximum pH, final pH during stability and CO2 production at the three exposure times, and an increasing on dry matter recovery, temperature, pH, electrical conductivity, ammonia nitrogen, dry matter, neutral and acid detergent fibre, and hemicellulose contents in the cactus pear silages. The inclusion of up to 35% buffel grass pre-dried in cactus pear silage represents a viable strategy in the process of nutrient conservation and fermentation quality. In addition to presenting low carbon production during aerobic stability.

Reliability Assessment of Power Systems in High-Load Areas with High Proportion of Gas-Fired Units Considering Natural Gas Loss

The “dual-carbon” policy underscores the crucial importance of a secure and stable natural gas supply to ensure the reliable operation of power systems. In high-load areas with a high proportion of gas-fired units and no alternative energy supply, urgent attention needs to be paid to the impact of natural gas loss on power system reliability. Given this background, a method to evaluate power system reliability that considers natural gas supply fluctuations is proposed. In this method, a reliability model of the natural gas supply chain based on the minimal cut set theory is constructed and the influence of policy regulations and economic market factors on system components is quantified. Then, a reliability-evaluation model for a power system that considers gas loss is constructed, and a non-sequential Monte Carlo simulation is used to solve it. Afterward, a reliability-evaluation method considering the power system reserve capacity is proposed. Finally, case studies on a natural gas system with a 14-node power system of a certain area are performed to verify the effectiveness of the proposed method, and the simulation results demonstrate that the reliability of the energy supply directly affects the reliability of the power system.

Anomalous loss behavior in a single-component Fermi gas close to a p -wave Feshbach resonance

We theoretically investigate three-body losses in a single-component Fermi gas near a $p$-wave Feshbach resonance in the interacting, non-unitary regime. We extend the cascade model introduced by Waseem \textit{et al.} [M. Waseem, J. Yoshida, T. Saito, and T. Mukaiyama, Phys. Rev. A \textbf{99}, 052704 (2019)] to describe the elastic and inelastic collision processes. We find that the loss behavior exhibits a $n^3$ and an anomalous $n^2$ density dependence for a ratio of elastic-to-inelastic collision rate larger and smaller than 1, respectively. The corresponding evolutions of the energy distribution show collisional cooling or evolution toward low-energetic non-thermalized steady states, respectively. These findings are particularly relevant for understanding atom loss and energetic evolution of ultracold gases of fermionic lithium atoms in their ground state.

Study on Homogeneous Reduction Technology in Gas Samples for Oil and Gas Loss

The process of storing oil depots and combined station tanks is affected by factors such as process technology, equipment, and management methods. Inevitably, some heavy hydrocarbon components will condense. According to the available literature, the existing detection methods are not enough to accurately measure the component composition so that the proportion of heavy hydrocarbon substances in the lost gas is reduced. In this paper, by inventing a homogeneous reduction device, the lost gas in the entire laboratory process was kept in a homogeneous state so that the gas components were well-retained. Using the homogeneous reduction method and a traditional inspection method, gas chromatography was performed on a standard gas and the on-site lost gas, respectively. The standard gas measurement results show that the mean deviations of the homogeneous reduction method and the traditional test method were −3.45% and −11.62%, respectively, and the reduction degree reached 96.55% with the homogeneous reduction method. The results of the on-site gas loss measurements show that the proportions of most hydrocarbon substances in each lost gas increase to varying degrees after using the homogeneous reduction technology. Therefore, it is proved that these components can be better preserved using the homogeneous reduction method. It can effectively avoid the condensation of components, which is of great significance to the study of oil and gas loss.

The Effects of Fertilizer Sources and Site Location on Greenhouse Gas Emissions from Creeping Bentgrass Putting Greens and Kentucky Bluegrass Roughs

Understanding greenhouse gas (GHG) emissions from turfgrass allows managers to make cultural management decisions to reduce GHG emissions. The objective of this study was to evaluate fertilizer source [urea (URE), polymer-encapsulated urea (POL), and milorganite (MIL)] and site location (green, wet rough, and dry rough) on GHG [carbon dioxide (CO2), methane (CH4), and nitrous oxide (N2O)] emissions. Greenhouse gas data, soil temperature, soil moisture, canopy greenness, and turfgrass quality were collected. High soil temperature and moisture were correlated with soil CO2 and N2O flux. The wet rough fluxed more soil CH4 across the 2-year study. The POL fluxed the highest amount of soil CO2, while POL and MIL fluxed the largest amount of soil N2O on the wet rough. Milorganite and POL increased canopy greenness in both roughs during the spring. On the green, URE produced greater canopy greenness in the spring and fall. Our results indicate that when soil moisture and temperature are high, turfgrass managers should employ methods of reducing soil temperatures that do not increase soil moisture to reduce GHG emissions. Under warm and wet conditions, gaseous losses of GHGs are accelerated with slow-release fertilizers.

Study on gas wave ejector with a novel wave rotor applied in natural gas extraction

A gas wave ejector (GWE) is an efficient energy conversion technology. This study innovatively proposes a new type of curved diverging channel (Sp-ch channel) and performs a relevant comparative fluid and thermodynamic analysis. The flow losses of the incident high-pressure gas and the medium-pressure gas in the pressure port can be significantly reduced by the bending angles of the Sp-ch channel. The structure of the Sp-ch channel allows the medium-pressure gas to complete a certain degree of dynamic-static pressure conversion in the channels, improving the static pressure ratio of the gas discharged from the rotor. Compared to the traditional rotor, the Sp-ch rotor exhibits a minimum increase of 57% in ejection rate and 5% in efficiency under the comparative conditions in this study. This study established a GWE testing platform in a coalbed methane well site and conducted its first application test, which preliminarily shows the application advantages of a GWE. Under the testing conditions in this study, the maximum ejection rate of GWE reaches to 35.1%, allowing for a maximum recovery production of approximately 8832 Nm3/d from the discontinued low-pressure wells. Moreover, except for overcoming mechanical friction, the GWE operates with almost no power consumption.

Experimental simulations of hydrogen migration through potential storage rocks

In the framework of future decarbonization of the energy industry, the safe and effective storage of hydrogen is an important approach to add to a climate-friendly energy system. Until the development of sufficiently large electrical storage systems, the storage of hydrogen in the order of GWh to TWh is envisaged in salt caverns or porous geological formations with a gas-tight covering of salt or claystone. In order to calculate gas losses from these H2 storage facilities, the H2 diffusivity of the storage and cap rocks must be known. To determine the hydrogen diffusion rates in these rocks, an experimental set-up was designed, constructed and tested. The set-up comprises two gas chambers, separated by the rock sample under investigation with an exposed area of approximately 7 cm2. The driving force for gas migration through the rock sample from the hydrogen-containing feed gas chamber to the hydrogen-free permeate chamber is the chemical potential (concentration) gradient. With respect to hydrogen migration behaviour, hydrogen breakthrough times and hydrogen diffusion coefficients were determined for dry and wet Bentheimer sandstone, Werra rock salt and Opalinus clay samples. Breakthrough times varied between less than 1 h and 843 h. Based on concentration changes at the permeate side, hydrogen diffusion coefficients were derived ranging from 10−9 to 10−8 m2/s. The differences between the materials and the effect that wetted or water-saturated samples have higher hydrogen retention due to closed pores and microcracks were clearly shown. The experimental set-up proves to be a suitable approach to determine site-specific rock characteristics such as hydrogen diffusion coefficients and breakthrough times for natural geomaterials.

Transportation of pipeline and liquefied natural gas: comparative analysis of pros and cons

Today energy supply and energy efficiency are still the most important and relevant issues of lively international discussions. The purpose of this paper is to study the current state of the natural gas market. The primary types of transported hydrocarbon fuels currently presented on the trading floor include natural gas predominantly transported through trunk pipelines, and liquefied natural gas competing with it. The study of this problem involved a comparative analysis of the advantages and disadvantages of liquefied natural gas and pipeline gas transportation for the case of commercial gas shipment from the Russian Federation to the European Union and liquefied natural gas shipment from the United States of America to the European Union. It is important to note that natural gas shipments through the Nord Stream gas pipeline have been completely suspended since September 2022 for an indefinite period of time. As a consequence, it is the American liquefied natural gas that is becoming the main alternative to the pipeline gas from Russia today. An agreement has been formed between the United States and the European Union to supply 15 billion cubic meters of liquefied natural gas in the past 2022. However, the inescapable fact is that daily guaranteed shipment of natural gas is a timely and economically feasible source of energy fuel. Using the rule of guaranteed advantages and disadvantages, the authors identified the most rational and profitable aspects of light hydrocarbon fuel transportation. The conducted study resulted in the analysis of the following indicators: the cost of shipped raw materials, the transportation cost of compared options, and amount of hydrocarbon gas losses during the main technological operations. In addition, the issue of environmental safety of operated facilities was considered.

In Situ Dispersion of Lignin in Polypropylene via Supercritical CO2 Extrusion Foaming: Effects of Lignin on Cell Nucleation and Foam Compression Properties.

Supercritical CO2 (scCO2) extrusion foamed high-melt-strength (HMS) polypropylene (PP) often suffers from low cell density, large cell sizes, and poor cell structure uniformity due to the poor nucleation rates of CO2 in the PP. To remedy this, various inorganic fillers have been used as heterogeneous nucleation agents. Although their efficient nucleation effects have been demonstrated, the preparation of these fillers causes some adverse effects on the environment/human health or involves relatively expensive processes or non-eco-friendly chemicals. In this work, biomass-based lignin is studied as a sustainable, lightweight, and cost-effective nucleating agent. It is found that scCO2 could assist in situ dispersion of lignin in the PP in the foaming process, leading to significantly increased cell density, smaller cells, and improved cell uniformity. The Expansion Ratio is also simultaneously improved due to reduced diffusive gas loss. The PP/lignin foams with low lignin loadings exhibit higher compression moduli and plateau strengths than the PP foams with the same densities owing to the improved cell uniformity and probably also the reinforcing effect of the small lignin particles in cell walls. Moreover, the energy absorption capability of the PP/lignin foam with 1 wt% lignin could match the PP foam with similar compression plateau strengths; even the density of the former is 28% lower than the latter. Therefore, this work provides a promising approach to a cleaner and more sustainable production of HMS PP foams.

Multiphase flow characteristics and gas loss in the shear layer on a ventilated supercavity wall

The shear flow on the large-scale gas–water wall inside a ventilated supercavity exhibits gas entrainment mode and determines the change law of the supercavity's gas loss, significantly impacting the shape and dynamics of the supercavity. Therefore, to develop an accurate prediction model and a ventilation control method for a supercavity under complex motion conditions, it is required to systematically and quantitatively study the shear flow characteristics and rules. This study calculates and comparatively analyzes the shear layers on either side of the supercavity wall based on numerical simulations of ventilated supercavitating flows in an unbounded field using the gas–vapor–water multi-fluid model. It is shown that the external shear layer with a very irregular outer boundary is considerably thinner than the internal shear layer. We further analyze the flow and distribution characteristics of all the phases in the shear layers with and without the influence of gravity. Our analysis confirms that all the phases exhibit a similar velocity change rule along the supercavity radial direction in the shear layer, whereas gas and water phases exhibit opposite radial phase distribution trends. It was also seen when natural cavitation occurs that the vapor phase is mainly distributed in the head of the supercavity. Moreover, at the same radial position, it was seen that the vapor velocity was higher than the gas velocity and slightly lower than the water velocity. Using the shear flow and phase distribution characteristics, a shear-layer gas loss model is established and validated for ventilated supercavitating flows.

Mechanisms of conservation tillage on nitrogen-fertilizer reduction and maize grain improvement in Mollisols of Northeast China: Insights from a 15N tracing study.

Conservation tillage is an important management practice to guarantee soil fertility in degraded Mollisols. It is still unclear, however, whether the improvement and stability of crop yield under conservation tillage can be sustainable with increasing soil fertility and reducing fertilizer-N application. Based on a long-term tillage experiment initiated in Lishu Conservation Tillage Research and Development Station by Chinese Academy of Sciences, we conducted a 15N tracing field micro-plot experiment to investigate the effects of reducing nitrogen application on maize yield and fertilizer-N transformation under long-term conservation tillage agroecosystem. There were four treatments, including conventional ridge tillage (RT), no-tillage with 0% (NT0), 100% (NTS) maize straw mul-ching, and 20% reduced fertilizer-N plus 100% maize stover mulching (RNTS). The results showed that after a complete cultivation round, the average percentages of fertilizer N recovery in soil residues, crop usage, and gaseous loss were 34%, 50%, and 16%, respectively. Compared with conventional ridge tillage, no-tillage with maize straw mulching (NTS and RNTS) significantly increased the use efficiency of fertilizer N in current season by 10% to 14%. From the perspective of N sourcing analysis, the average percentage of fertilizer N absorbed by crop parts (including seeds, straws, roots, and cobs) to the total N uptake reached nearly 40%, indicating that soil N pool was the main source of N for crop uptakes. In comparison with conventional ridge tillage, conservation tillage significantly increased total N storage in 0-40 cm by reducing soil disturbance and increasing organic inputs, and thus ensured the expansion and efficiency increment of soil N pool in degraded Mollisols. Compared with conventional ridge tillage, NTS and RNTS treatments significantly increased the maize yield from 2016 to 2018. In all, by improving fertilizer nitrogen utilization efficiency and maintaining the continuous supply of soil nitrogen, long-term management of no-tillage with maize straw mulching could achieve a stable and increasing maize yield in three consecutive growing seasons and simultaneously reduce environmental risks derived by fertilizer-N losses, even under the condition of 20% reduction of fertilizer-N application, and thus actualize the sustainable development of agriculture in Mollisols of Northeast China.

Reutilizar purines de tambo como oportunidad para reciclar nitrógeno y reducir su impacto ambiental

Dairy cattle slurry (liquid mixture of manure and water from the milking operation) can be reused for agricultural production in replacement for synthetic fertilizers. However, its high nitrogen (N) concentration could stimulate the volatilization of ammonia (NH3) and nitrous oxide (N2O) emission, with consequences for global warming. Our objectives were: to quantify NH3 and N2O loss in maize fertilized with surface-applied dairy cattle slurry or urea, and to relate N2O emission with soil ammonium, nitrate and water contents. We performed a manipulative field experiment where we measured both gaseous losses during an agricultural campaign. Slurry enhanced NH3 volatilization the day after the application (2.7±0.25 vs. 1.1±0.25 and 0.6±0.25 kg N-NH3.ha-1.day-1 for slurry, urea and the control, respectively) and direct N2O emission during three days after the application (75±13 vs. 28±5 y 26±6 µg N-N2O.m-2.h-1 for slurry, urea and the control, respectively). Four days after application, volatilization was higher with urea and N2O emissions were similar between treatments. The loss of NH3 accumulated throughout the maize growing season was higher for urea than for slurry, and the accumulated N2O emission was similar for both fertilizers. Nitrous oxide emissions were related to soil water content, initially introduced with slurry and then with rainfall. The loss of NH3 + N2O from the fertilizers after subtracting that of the control, was higher after the application of urea than slurry (10.8±1.2 and 3.1±0.7 kg N/ha or 0.53±0.06 and 0.18±0.04 kg N/t MS), and maize yield was similar for both fertilization treatments (19.0±0.7 t MS/ha). These results show that fertilization with dairy cattle slurry is a promising practice because it has a lower environmental footprint compared to synthetic fertilizers.

Recovery boiler back-end heat recovery

Sustainability and efficient use of resources are becoming increasingly important aspects in the operation of all industries. Recently, some biomass-fired boilers have been equipped with increasingly complex condensing back-end heat recovery solutions, sometimes also using heat pumps to upgrade the low-grade heat. In kraft recovery boilers, however, scrubbers are still mainly for gas cleaning, with only simple heat recovery solutions. In this paper, we use process simulation software to study the potential to improve the power generation and energy efficiency by applying condensing back-end heat recovery on a recovery boiler. Different configurations are considered, including heat pumps. Potential streams to serve as heat sinks are considered and evaluated. Lowering the recovery boiler flue gas temperature to approximately 65°C significantly decreases the flue gas losses. The heat can be recovered as hot water, which is used to partially replace low-pressure (LP) steam, making more steam available for the condensing steam turbine portion for increased power generation. The results indicate that in a simple condensing plant, some 1%–4% additional electricity could be generated. In a Nordic mill that provides district heating, even more additional electricity generation, up to 6%, could be achieved. Provided the availability of sufficient low-temperature heat sinks to use the recovered heat, as well as sufficient condensing turbine swallowing capacity to utilize the LP steam, the use of scrubbing and possibly upgrading the heat using heat pumps appears potentially useful.

Effect and Mechanism of Rice-Pasture Rotation Systems on Yield Increase and Runoff Reduction under Different Fertilizer Treatments

This study investigated the effects of crop rotations and different ratios of dairy manure fertilizer on nitrogen loss and rice yield in the Erhai Lake basin. Two kinds of herbages were set in the rotation: Ryegrass (Lolium multiflorum cv.‘Tetragold’) (R) and Villose Vetch (Vicia villosa var. Glabresens) (V). The experiment involved two-year field tests with nine management treatments. The results showed that the rice-Vicia villosa rotation with 70% chemical and 30% dairy cattle manure fertilization increased rice yield significantly, while reducing nitrogen runoff losses and increasing microbial abundance with nitrification and nitrogen fixation. The microbial abundance varied among tested soils, with Alphaproteobacteria, Rhodopseudomonas, Rhizobiales, Bradyrhizobium, and Azotobacter Vinelandii being the highest in 70% chemical fertilizer + 30% manure rice Villose Vetch (R-V) to ameliorate plant growth and strengthen the efficiency of nutrient uptake, whereas that of Planctomycete was comparatively lower to promote long-term N stabilization in soil. The 70% F—30% M R-V treatment also significantly decreased nitrate reductase and ammonia monooxygenase enzyme activity, potentially improving fertilizer use efficiency, and reducing gaseous losses. The LEfSe analysis results indicated that 70% F—30% M R-V fertilizers significantly enhanced the abundances of metabolic genes related to energy and nitrogen. These findings suggested that appropriate agricultural management using rice-Vicia villosa rotation and 70% chemical + 30% dairy cattle manure fertilization can improve the soil quality and sustainability of agroecosystems.

The new Kr-86 excess ice core proxy for synoptic activity: West Antarctic storminess possibly linked to Intertropical Convergence Zone (ITCZ) movement through the last deglaciation

Abstract. Here we present a newly developed ice core gas-phase proxy that directly samples a component of the large-scale atmospheric circulation: synoptic-scale pressure variability. Surface pressure changes weakly disrupt gravitational isotopic settling in the firn layer, which is recorded in krypton-86 excess (86Krxs). The 86Krxs may therefore reflect the time-averaged synoptic pressure variability over several years (site “storminess”), but it likely cannot record individual synoptic events as ice core gas samples typically average over several years. We validate 86Krxs using late Holocene ice samples from 11 Antarctic ice cores and 1 Greenland ice core that collectively represent a wide range of surface pressure variability in the modern climate. We find a strong spatial correlation (r=-0.94, p&lt;0.01) between site average 86Krxs and time-averaged synoptic variability from reanalysis data. The main uncertainties in the analysis are the corrections for gas loss and thermal fractionation and the relatively large scatter in the data. Limited scientific understanding of the firn physics and potential biases of 86Krxs require caution in interpreting this proxy at present. We show that Antarctic 86Krxs appears to be linked to the position of the Southern Hemisphere eddy-driven subpolar jet (SPJ), with a southern position enhancing pressure variability. We present a 86Krxs record covering the last 24 kyr from the West Antarctic Ice Sheet (WAIS) Divide ice core. Based on the empirical spatial correlation of synoptic activity and 86Krxs at various Antarctic sites, we interpret this record to show that West Antarctic synoptic activity is slightly below modern levels during the Last Glacial Maximum (LGM), increases during the Heinrich Stadial 1 and Younger Dryas North Atlantic cold periods, weakens abruptly at the Holocene onset, remains low during the early and mid-Holocene, and gradually increases to its modern value. The WAIS Divide 86Krxs record resembles records of monsoon intensity thought to reflect changes in the meridional position of the Intertropical Convergence Zone (ITCZ) on orbital and millennial timescales such that West Antarctic storminess is weaker when the ITCZ is displaced northward and stronger when it is displaced southward. We interpret variations in synoptic activity as reflecting movement of the South Pacific SPJ in parallel to the ITCZ migrations, which is the expected zonal mean response of the eddy-driven jet in models and proxy data. Past changes to Pacific climate and the El Niño–Southern Oscillation (ENSO) may amplify the signal of the SPJ migration. Our interpretation is broadly consistent with opal flux records from the Pacific Antarctic zone thought to reflect wind-driven upwelling. We emphasize that 86Krxs is a new proxy, and more work is called for to confirm, replicate, and better understand these results; until such time, our conclusions regarding past atmospheric dynamics remain speculative. Current scientific understanding of firn air transport and trapping is insufficient to explain all the observed variations in 86Krxs. A list of suggested future studies is provided.

Emerging transitions in organic waste infrastructure in Aotearoa New Zealand

AbstractAotearoa New Zealand is at a critical juncture in reducing and managing organic waste. Research has highlighted the significant proportion of organic waste sent to landfills and associated adverse effects such as greenhouse gas emissions and loss of valuable organic matter. There is current debate about what practices and infrastructure to invest in to better manage and use organic waste. We highlight the diversity of existing organic waste practices and infrastructures, focusing on Auckland, Wellington and Christchurch. We show how debates about organic waste practices and infrastructure connect across three themes: waste subjectivities, collective action in place and language.

The giant diploid faba genome unlocks variation in a global protein crop

Increasing the proportion of locally produced plant protein in currently meat-rich diets could substantially reduce greenhouse gas emissions and loss of biodiversity1. However, plant protein production is hampered by the lack of a cool-season legume equivalent to soybean in agronomic value2. Faba bean (Vicia faba L.) has a high yield potential and is well suited for cultivation in temperate regions, but genomic resources are scarce. Here, we report a high-quality chromosome-scale assembly of the faba bean genome and show that it has expanded to a massive 13 Gb in size through an imbalance between the rates of amplification and elimination of retrotransposons and satellite repeats. Genes and recombination events are evenly dispersed across chromosomes and the gene space is remarkably compact considering the genome size, although with substantial copy number variation driven by tandem duplication. Demonstrating practical application of the genome sequence, we develop a targeted genotyping assay and use high-resolution genome-wide association analysis to dissect the genetic basis of seed size and hilum colour. The resources presented constitute a genomics-based breeding platform for faba bean, enabling breeders and geneticists to accelerate the improvement of sustainable protein production across the Mediterranean, subtropical and northern temperate agroecological zones.

Analysis on influencing factors and improvement of thermal efficiency of bagasse boilers based on performance test data

Based on the performance test data of the 136 samples for bagasse boiler in Guangxi Zhuang Autonomous Region, China, the energy analysis of bagasse boilers is performed. The results show that the average thermal efficiency was estimated to be 86.75%, and 39.71% of samples did not meet the limited value requirements, only 1.47% in quantity met the target value, and the energy saving potential is very large. The heat loss of bagasse boilers is dominated by the heat loss of flue gases. Therefore, the effects of bagasse moisture content, excess air ratio and oxygen concentration on flow rate of flue gas and thermal efficiency were further simulated. The average thermal efficiency of bagasse sample boiler will increase obviously, when the moisture content of bagasse and excess air ratio decrease and oxygen concentration increases. In addition, the average value of carbon dioxide emission was 131 kg/GJ. If the thermal efficiency of the substandard boilers reaches the target level, bagasse consumption and carbon dioxide emissions will be reduced by 526 kt and 466 kt per year, respectively. This will be of great significance to energy conservation and emission reduction.

Magnetic properties of a high-density iron dust core without binders

Iron dust cores produced from insulated iron particles via the powder metallurgy pressure-forming process are suitable for small motor cores, reactor cores, and inductors because of their high shape flexibility. However, the dust core’s magnetic properties are inferior to those of conventional laminated cores because the insulation materials and silicon resins between iron particles to reduce eddy current losses degrade the magnetic properties of the core. Unfortunately, there is no researches of the iron dust cores without binders such as resin to improve the magnetic properties. Therefore, this paper investigates the magnetic properties of iron dust cores without binders. Assessments revealed that the dust core of gas-atomized iron powder with an average particle size of 49μm had the best magnetic properties. On further assessments, while the insulation layer’s thickness was around 60 nm, the density of gas atomized iron powder core was over 7.6 g/cm3. At 50 Hz and 1 kHz, DC hysteresis iron losses and eddy current loss of 49μm gas atomized iron dust cores without a binder showed lower values than those of the conventional powder core with a binder.

Methane emissions from elements of gas distribution networks and the energy security of EU countries in time of gas wars

The scale of methane emissions from gas distribution systems has serious consequences for energy security, ensuring the security of natural gas transmission and reducing gas losses in transport. That is why it is important to determine the scale of such emissions from individual elements of the infrastructure. It has been confirmed that such emissions have a significant effect on the military security of EU co untries. The emission factor (EF) is affected by many other causes. The best method of calculating the EF is one that takes into account the most variables. A theoretical method of determining the EF has been developed, taking into consideration the age of the equipment as well as pressure, temperature and speed. When comparing the methods in the literature to date, one has to bear in mind that none of them describes the variables that affect the magnitude of the EF. To map an actual emission, it is crucial to have data that describe the gas infrastructure component under analysis, along with the most precise information available to characterise the operating conditions.