Garnet Laser Research Articles

A Comparative Evaluation of Root Surface Biomodification with Erbium-Doped Yttrium Aluminum Garnet Laser, Ethylenediaminetetraacetic Acid Gel, and Titanium Nitride Curette: In Vitro Scanning Electron Microscope and Profilometry Analyses.

Objective: This study aims to evaluate the in vitro effects of different biomodification treatment methods on extracted tooth/root surfaces in terms of biologically acceptable changes favoring better periodontal healing. Background data: The use of various agents for root surface biomodification (RSB), during periodontal procedures is of critical importance to increase the success of the treatments through healing. Ethylenediaminetetraacetic acid (EDTA) is the most frequently used chemical RSB agent in periodontal clinical practice. Erbium-doped yttrium aluminum garnet (Er:YAG) lasers have well-known advantages on blood cell adhesion and fibrin network formation on root surfaces. Recently, novel titanium nitride (TIN) curettes are of great interest due to smoother surface changes obtained after their application. Materials and methods: Forty-four dentine specimens from extracted single-rooted teeth were randomly divided into four groups: Group 1: No treatment; Group 2: Er:YAG laser irradiation; Group 3: EDTA gel application; Group 4: TIN curette instrumentation. All specimen surfaces were wet polished before treatments. Before and after root surface roughness parameters of all specimens were assessed with a profilometer. Further, all scanning electron microscopy micrographs were analyzed and scored for root surface and smear layer morphology characteristics by two different blinded researchers. Results: There were no statistical differences between the initial roughness of all groups (p = 0.687). After treatments, EDTA gel group revealed an intact intertubular area, some smear debris on dentine surfaces, and partially occluded dentine tubules. Er:YAG laser created the highest roughness (p < 0.05) among all treatment groups with no smear layer and exhibited fully exposed dentine tubules and collagen fibrils. Surfaces instrumented with TIN curette were the smoothest (p < 0.05) and covered with a compact and thick smear layer. Conclusions: Within the limits of this study, Er:YAG laser-irradiated surfaces exhibited exposed collagen fibrils, and Er:YAG laser irradiation was found as the only method yielding the desired surface characteristics for better periodontal healing, where the fibrils are exposed in the absence of smear layer.

Surgical Technique of Supine Percutaneous Nephrolithotomy in Children

AbstractPercutaneous nephrolithotomy (PCNL) in children has become more widely used due to its high efficacy and safety and to the development of miniaturized instruments. A supine approach is promising due to advantages such as better ventilation, reproducibility, and ergonomics. The purpose of the present study is to describe our surgical technique with special considerations in the pediatric population. We used an oblique supine position supported by one silicone gel positioning pad under the hip and another under the ipsilateral flank. The anatomical landmarks used to guide the puncture were the 11th and 12th ribs, the posterior axillary line, and the iliac crest. Initially, a ureteral catheter was introduced endoscopically. A retrograde pyelography was performed to guide the puncture, which was performed using a biplanar technique. A hydrophilic guide wire was then advanced through the needle. Dilation was performed with Alken telescopic dilators until 14 Ch. Fragmentation was performed either with a 13 Ch semirigid cystoscope or a flexible ureteroscope using a holmium: yttrium aluminum garnet (Ho:Yag) laser. We left a double J catheter. Supine PCNL in the pediatric population has comparable efficacy in terms of stone free rate to that of the prone approach as well as less complications. Certain considerations in children are careful padding and placement of the patient close to the edge of the table. Puncture should be guided by ultrasound to reduce radiation exposure. Miniaturized equipment is not widely available, so adaptation of adult equipment for the pediatric population is sometimes necessary.

Experimental study of a millimeter-sized Ga-In drop ablated by a nanosecond laser pulse

The motion of millimeter gallium-indium (Ga-In) drops subject to intense Neodymium-doped Yttrium Aluminum Garnet (Nd: YAG) laser blasts in the air is investigated experimentally. The drop first experiences plasma emissions and then undergoes interfacial instabilities. The effective ablation pulse energy is quantified by the laser-induced shockwave propagation. The laser-blast-induced concave expansion and spanwise depression history is measured, and the data collapse on straight lines with proper rescaling of pulse energy and time. The propulsion speed of the drop is described by a semi-empirical model that considers the laser energy and fluence at the threshold of ablation. The data show that this propulsion speed scaling remains valid to the millimeter drop ablated by the pulsed laser with beam spot much smaller than the drop, although the original scaling was derived and verified for the indium-tin (In-Sn) droplet of tens of micrometers impacted by a laser pulse with the focal point larger than the droplet.

Outcome of Rirs for Renal Pelvic Stones 1.5 to 2.0 cm using Semi-Rigid Uretero-Renoscopy

Background Retrograde Intrarenal Surgery (RIRS) is among the recommended treatment modality for stones located in renal pelvis and is of less than 2 cm. Renal Stones with Hounsfield units more than 1000 have low stone free rate with ESWL. Objective To determine the outcome of retrograde intrarenal surgery using semirigid ureteroscope in fragmentation of renal pelvic stone. Methods Patients with 1.5-2.0 cm stone located in renal pelvis of more than 1000 HU who underwent retrograde intrarenal surgery as primary procedure at Sindh Institute of Urology And Transplantation were included. Stone fragmentation was achieved with holmium-yttrium aluminum garnet laser. Secondary procedure was performed if complete stone fragmentation was not achieved. Statistical analysis was performed by SPSS version 20. Result Total 82 patients with mean size of pelvic renal stones 1.7 ± 0.53 cm were included. The mean operating time was 32.1±12.9 mins. The stone clearance rate at six weeks after the first procedure was 79.3%. Minor complications including flank pain, fever and hematuria were reported. Conclusion Retrograde intrarenal surgery performed with semi rigid ureteroscope in renal pelvic stones of more than 1000 HU is a technically safe and effective procedure. Keywords: Retrograde intrarenal surgery; Pelvic stone; Flexible ureteroscopy and holmium laser.

Retinal arterial macroaneurysm in a patient with arterial hypertension

Purpose: To present a case of retinal arterial macroaneurysm in a 48–year–old male patient with systemic arterial hypertension.&#x0D; Case report: A 48–year–old male was admitted to our department because of progressive deterioration of visual acuity in his right eye. He reported diplopia and blurred central field vision. The patient was treated for systemic arterial hypertension and had no other known medical problems. Medical treatment, examination results, and therapy were presented in this case report.&#x0D; Conclusions: In the treatment of patients with retinal arterial macroaneurysm a holistic approach is important. In an attempt to optimize the final outcome of the patient's treatment, both the ocular symptoms and systemic risk factors should be treated. Therapeutic interventions for eyes with retinal arterial macroaneurysm include laser photocoagulation, pneumatic displacement of haemorrhage, vitreoretinal surgical techniques, the use of neodymium–doped yttrium aluminium garnet or argon laser, and intravitreal injections of anti–vascular endothelial growth factor drugs. Their precise roles should be evaluated in further studies.

Scanning Electron Microscope Image Analysis of Bonding Surfaces following Removal of Composite Resin Restoration Using Er: YAG Laser: In Vitro Study.

It is impossible to remove tooth-colored restorations by mechanical means without unnecessary damage to the adjacent sound tooth structure. This study is aimed at investigating erbium-doped yttrium aluminum garnet (Er: YAG) laser (Hoya ConBio, VersaWave, CA, USA) in removing composite resin restorations and assessing the change in morphology of bonding surfaces using a scanning electron microscope (EDX, CAMSCANNER, 3200LV, UK). The investigators collected thirty extracted sound human premolar teeth for this investigation, and the conventional design class V cavity was prepared on the buccal surface of each specimen. The specimens were allocated randomly into three groups, according to the procedure used for the ablation of the composite restoration: group A (high-speed diamond fissure bur), group B, and group C (Er: YAG laser) using a different pulse repetition rate of 20 Hz (group B) and 25 Hz (group C). The AutoCAD software program (Autodesk, Inc., 2016) was used to calculate the surface area and the resulting dimensional change of the cavities after restoration removal. The cavities were filled with composite resin and randomly assigned into two groups conforming to the methods applied to eliminate the restoration; diamond turbine fissure bur and laser. In each group, two specimens were selected randomly for scanning electron microscope analysis of bonding surfaces. The least meantime for the composite resin removal was observed in the high-speed diamond bur, significantly less than both Er-YAG laser groups (p < 0.001). However, at a higher pulse repetition rate, time-consuming decreased. The results showed that laser is more conservative in removing composite resin restoration as the change was most remarkable in group A (0.800 mm), then group C (0.466 mm), and the slightest change is in group B (0.372 mm) (p = 0.014). The dentin surface of group A showed a smooth surface with no opened dentinal tubule and intact smear layer. In groups B and C, dentin surfaces were irregular, scaly, or flaky, and dentinal tubules were opened without a smear layer. Therefore, Er: YAG laser is effective for composite resin removal considering the parameters chosen in this study with fewer changes in cavity surface area and better microretentive features.

Comparing the effects and safety of dorzolamide hydrochloride + timolol maleate versus brimonidine after neodymium-doped yttrium aluminium garnet laser capsulotomy posterior capsule opacification.

Posterior capsular opacification is treated using neodymium-doped yttrium aluminium garnet laser capsulotomy that leads to increased intraocular pressure. Here, we compare the effects of dorzolamide hydrochloride + timolol maleate versus brimonidine on intraocular pressure. We also investigate their side effects after neodymium-doped yttrium aluminium garnet laser capsulotomy. In these patients, there are no prior studies comparing the results of these two drugs. Ninety patients with posterior capsule opacification contributed to the study. They received yttrium aluminium garnet laser capsulotomy. After yttrium aluminium garnet laser capsulotomy, they were randomized into three groups. Group 1 received dorzolamide hydrochloride + timolol maleate; Group 2 took brimonidine; and Group 3, the control group, took no drug. Group 1 took dorzolamide hydrochloride + timolol maleate eye drops 1 h before the procedure and on the third hour of the first day and two times per day between the second and the seventh days. Group 2 took brimonidine eye drops 1 h before the procedure and on the third hour of the first day, two times per day between the second and the seventh days. Brimonidine had a similar side effect profile to the fix combination. Intraocular pressure on the first (p = 0.87) and third days (p = 0.124) were similar in Group 1 (dorzolamide hydrochloride + timolol maleate), Group 2 (brimonidine) and the control group. The mean intraocular pressure value of the control group was significantly higher than Groups 1 and 2 because the anti-glaucomatous effects of the drugs become prominent on the seventh day (p = 0.041). In Group 1 and Group 2, intraocular pressure was significantly lower than the control group on the seventh day (p = 0.041). Stinging, itching, hyperemia and Tyndall rates were similar in Group 1, Group 2 and the control group. Watery eyes were less common in the brimonidine group than in the dorzolamide hydrochloride-timolol maleate and the control groups on the seventh day (p = 0.02). Brimonidine also significantly lowered the chemosis rate on the third (p = 0.04) and seventh (p = 0.03) days. We suggest that brimonidine and a combination of dorzolamide + timolol are similarly effective at reducing eye pressure for routine cases. In cases where intraocular pressure attacks might be at higher risk, using the dorzolamide + timolol combination would be more appropriate.

SWCNT-SA mode-locked Tm,Ho:LCLNGG laser.

Sub-100 fs pulse generation from a passively mode-locked Tm,Ho-codoped cubic multicomponent disordered garnet laser at ∼2 µm is demonstrated. A single-walled carbon nanotube saturable absorber is implemented to initiate and stabilize the soliton mode-locking. The Tm,Ho:LCLNGG (lanthanum calcium lithium niobium gallium garnet) laser generated pulses as short as 63 fs at a central wavelength of 2072.7 nm with an average output power of 63 mW at a pulse repetition rate of ∼102.5 MHz. Higher average output power of 121 mW was obtained at the expense of longer pulse duration (96 fs) at 2067.6 nm using higher output coupling. To the best of our knowledge, this is the first report on mode-locked operation of the Tm,Ho:LCLNGG crystal.

Dusting Efficiency of a Novel Pulsed Thulium:Yttrium Aluminum Garnet Laser vs a Thulium Fiber Laser.

Background: Holmium:yttrium aluminum garnet laser (Ho:YAG) is still considered the gold standard in laser lithotripsy. There is a large body of literature comparing the capabilities of Ho:YAG and thulium fiber lasers (TFLs). The novel, pulsed thulium:yttrium aluminum garnet laser (p-Tm:YAG) evaluation model has only been compared with Ho:YAG in terms of its dusting performance to date. It was this study's aim to compare the p-Tm:YAG's dusting efficiency with that of a chopped TFL. Materials and Methods: During the laser ablation procedure, while the laser device was emitting light, the laser fiber was spiraled across the surface of a uniform kidney stone model via software. We relied on the stone model's difference in weight before and after the dusting procedure to assess the dusting efficiency and assessed each laser device's dusting efficiency at various preset laser configurations and laser fiber-motion speeds. We compared both laser devices' laser configurations, which were identical in pulse energy and frequency, while keeping in mind that the pulse duration differed significantly. In addition, we tested each laser device's capability. Results: The average ablated weight across all laser configurations was 0.61 g (standard deviation [SD] = 0.44 g) for p-Tm:YAG and 0.76 g (SD = 0.51 g) for TFL. After statistical analysis, we found no significant difference in ablated weight between the laser devices (U = 1715.5, p-value = 0.11). The maximum permissible frequency configuration for TFL was 1600 Hz, which resulted in the worst overall dusting output. Conclusions: We observed that the p-Tm:YAG's dusting efficiency resembled that of TFL in the identical pulse energy and frequency laser configurations. The ablation efficiency did not seem to be affected by the laser devices' differences in pulse duration. Slower laser fiber-motion speeds resulted in more efficient ablation. When using the maximum preset frequency and power configuration, TFL's dusting efficiency appeared to be inefficient.

Safety, efficacy, and timing of Nd:YAG laser goniopuncture after nonpenetrating deep sclerectomy for glaucoma: A retrospective cohort study

Neodymium-doped yttrium aluminum garnet laser goniopuncture is an adjuvant procedure for nonpenetrating deep sclerectomy. We investigated optimal laser goniopuncture timing and the effect of laser iridoplasty on success rates. This single-center retrospective cohort study compared intraocular pressure control in patients with early versus late laser goniopuncture after nonpenetrating deep sclerectomy and evaluated the effects of laser iridoplasty pretreatment. A 3-month cut-off was used to define early versus late laser goniopuncture. The primary outcome was the proportion of patients maintaining intraocular pressure control according to definitions of complete (no medications) and qualified (with medications) success at 15, 18, and 21 mmHg thresholds. Data were analyzed using right-censored Kaplan-Meier estimation and log-rank testing. A total of 124 eyes of 124 patients were analyzed. Complete success rates after 3 years were 9.2%, 14.6%, and 23.3% for early laser goniopuncture and 21.8%, 26.0%, and 55.4% for late laser goniopuncture for 15, 18, and 21 mmHg, respectively (all p < .01). Qualified success rates after 3 years were 16.6%, 24.8%, and 40.9% for early laser goniopuncture and 21.5%, 56.1%, and 69.6% for late laser goniopuncture for 15, 18, and 21 mmHg, respectively (p = .096, .0026, .0061). Late laser goniopuncture was associated with decreased risk of iris incarceration and bleb collapse. Iridoplasty pretreatment was not associated with improved outcomes. Late laser goniopuncture (3-month cut-off) was associated with better intraocular pressure control and less adverse events than early laser goniopuncture.

Nd:YAG capsulotomy incidence associated with five different single-piece monofocal intraocular lenses: a 3-year Spanish real-world evidence study of 8293 eyes

ObjectivesTo investigate the associations between different single-piece monofocal intraocular lenses (IOLs) and neodymium-doped yttrium aluminum garnet laser (Nd:YAG) capsulotomy incidence 3 years after cataract surgery in a Spanish cohort.MethodsThis is a longitudinal retrospective cohort study. Data were extracted from the electronic medical records of two large regional hospitals in Spain. Patients aged ≥65 years receiving cataract surgery with placement of five different IOLs and with ≥6 months of baseline data were included. We report the Nd:YAG capsulotomy incidence 3 years post cataract surgery, and the survival plot over the 3 years of follow-up time. The associated adjusted (age, gender, and diabetic retinopathy) multivariate analysis with odds ratios (ORs) and 95% CIs is also presented.ResultsThe cohort (53% female, mean age 75 ± 5.9 years) included 14,519 eyes (Alcon AcrySof = 2968, AJL LLASY60 = 1776, Medicontur Bi-flex = 5176, Zeiss Asphina = 4478, and IOL Tech Stabibag = 121). Of these, 8293 were retained until 3-year follow-up. At 3 years after cataract surgery, the Nd:YAG capsulotomy incidence was 5% for Alcon AcrySof, while it ranged from 21.2% to 31.1% for the other IOLs (p < 0.0001 for each comparison). The odds for Nd:YAG capsulotomy were significantly higher (p < 0.0001) for other IOLs compared with those of Alcon AcrySof (ORs = 8.85, 5.86, 5.74, 5.21 for AJL LLASY60, Medicontur Bi-flex, IOL Tech Stabibag, and Zeiss Asphina, respectively).ConclusionsThe lower Nd:YAG capsulotomy rates for Alcon AcrySof IOLs compared to the other IOLs support the importance of lens choice in reducing patient burden and treatment costs.

Combination of Full-Field and Fractional Erbium: YAG Laser for Nonhealing Wounds.

To evaluate the outcomes of a heterogeneous group of patients with chronic ulcer receiving a combination regimen of full-field and fractional erbium-doped yttrium aluminum garnet (erbium: YAG) laser applications. Enrolled in this study were patients with chronic ulcer who had received at least 2 erbium: YAG laser sessions. Fractional applications followed the initial full-field application for debridement. The therapeutic outcomes were evaluated by serial photographs. The primary outcome measure was the proportion of patients achieving complete re-epithelialization at the first year. Forty-three treatment regions from 23 patients between 40 and 90 years (F: M = 11:12; age: 60.3 ± 15.5 years, mean ± SD) were eligible. The ulcers' median duration was 24 months (min-max: 2-240 months). The median number of laser sessions was 5 (min-max: 2-12). Of arterial (n = 13), immunologic (n = 9), venous (n = 8), diabetic (n = 8), and mechanical ulcers (n = 5), the primary outcome measure was achieved in 69%, 77.7%, 75%, 88.8%, and 100% of the groups, respectively. Full-field erbium: YAG laser applications preserve the vascular architecture and enable delicate debridement. Ongoing maintenance fractional laser sessions promote wound healing. Similar to the previous reports of erbium: YAG laser in venous and diabetic ulcers, arterial ulcers, and ulcers of immunologic origin demonstrated an objective treatment response along with different adjuvant approaches.

Physicochemical Changes of Contaminated Titanium Discs Treated With Erbium-Doped Yttrium Aluminum Garnet (Er:YAG) Laser Irradiation or Air-Flow Abrasion: An In Vitro Study.

Introduction: Peri-implantitis is a common complication of dental implant treatment. A cause-and-effect relationship has been previously documented between microbial plaque and peri-implantitis and implant failure. A difference has been reported in the disinfection efficacy of erbium laser irradiation and air-flow abrasion for contaminated titanium surfaces. Also, the surface changes caused by lasers and air-flow abrasion have not been well studied. Thus, the purpose of this study was to compare the surface changes of contaminated titanium discs following decontamination by erbium-doped yttrium aluminum garnet (Er:YAG) laser irradiation and air-flow abrasion. Methods: Twenty-eight intact, sandblasted, and acid-etched (SLA) titanium discs were used. Twenty-four titanium discs were contaminated with Escherichia coli. Then, they were decontaminated by using Er:YAG laser irradiation and air-flow abrasion. Four discs remained intact. The mean and standard deviation of the contact angle and the weight percentage of aluminum, titanium, oxygen, carbon, phosphorus, and calcium were measured. Qualitative changes in surface topography of titanium discs were assessed by scanning electron microscopy (SEM). Results: The mean weight percentage of carbon in the air-flow abrasion group (4.98%) experienced a significant reduction compared with the contaminated (positive control) group (P=0.035). The contact angles were 46.54° and 38.67° in the laser and air-flow abrasion groups respectively, which were significantly lower than the value in the positive control group (75.15°) (P ≤0.001). SEM micrographs showed no significant change in the surface area in either technique. Conclusion: Air-flow abrasion was more successful in improving the surface characteristics of titanium discs with no alteration in surface topography or elements, compared with Er:YAG laser irradiation. Further studies regarding the safety of the Er:YAG laser for the decontamination of titanium surfaces are recommended.

Improving the spectral intensity of aluminum plasma by applied-magnetic field in laser-induced breakdown spectroscopy

In this report, an impact of applied-magnetic field on laser induced breakdown spectroscopy (LIBS) emission with different air pressures and several time delays was explored by analyzing the solid aluminum (Al) sample. A Neodymium-doped yttrium aluminum garnet (Nd:YAG) laser at its basic wavelength (1064 nm) was utilized to generate the plasma and its optical emission was recorded with the help of an optical emission spectroscopy (OES) technique. A notable improvement was observed primarily at low pressure and shorter delay time for Al atomic lines due to the effect of magnetic field (0.5 T). For the air pressure of 100 Pa and delay time of 100 ns, the signal enhancement of approximately 2-fold was obtained for Al (I) 396.1 nm spectral line. The signal enhancement due to the magnetic confinement was attributed to an increase in electron-impact excitation rate and recombination processes. The plasma parameters like, electron temperature (Te) and electron number density (ne) were also affected under the applications of magnetic field. A considerable enhancement was noticed in comparison to the field-free case. The plasma temperature attained their highest values at 500 Pa only, however, the electron density was found to be completely enhanced across the magnetic field. The optical enhancement is accredited to the plasma-confinement by applied field and has scope in improving the LIBS sensitivity.

Residual Adhesive Removal Methods for Rebonding of Debonded Orthodontic Metal Brackets: Systematic Review and Meta-Analysis.

Debonding of orthodontic brackets is a common occurrence during orthodontic treatment. Therefore, the best option for treating debonded brackets should be indicated. This study aimed to evaluate the bond strength of rebonded brackets after different residual adhesive removal methods. This systematic review and meta-analysis was conducted according to the Preferred Reporting Items for Systematic Reviews and Meta-Analyses (PRISMA) statement. PubMed, Web of Science, The Cochrane Library, SciELO, Scopus, LILACS, IBECS, and BVS databases were screened up to December 2020. Bond strength comparisons were made considering the method used for removing the residual adhesive on the bracket base. A total of 12 studies were included for the meta-analysis. Four different adhesive removal methods were identified: sandblasting, laser, mechanical grinding, and direct flame. When compared with new orthodontic metallic brackets, bond strength of debonded brackets after air abrasion (p = 0.006), mechanical grinding (p = 0.007), and direct flame (p < 0.001) was significantly lower. The use of an erbium-doped yttrium aluminum garnet (Er:YAG) laser showed similar shear bond strength (SBS) values when compared with those of new orthodontic brackets (p = 0.71). The Er:YAG laser could be considered an optimal method for promoting the bond of debonded orthodontic brackets. Direct flame, mechanical grinding, or sandblasting are also suitable, obtaining clinically acceptable bond strength values.

Erbium, chromium-doped: yttrium, scandium, gallium, garnet and diode lasers in the treatment of peri-implantitis: clinical and biochemical outcomes in a randomized-controlled clinical trial.

This study aims to evaluate the effects of 940nm diode laser and 2780nm erbium, chromium-doped: yttrium, scandium, gallium, garnet (Er,Cr:YSGG) laser used in addition to mechanical therapy in the non-surgical treatment of peri-implantitis on clinical parameters and matrix metalloproteinase-9 (MMP-9) and tissue inhibitor of metalloproteinase-1 (TIMP-1) levels in the peri-implant crevicular fluid. A total of 50 patients with peri-implantitis were randomized into three groups to receive peri-implant treatment. The control group (n = 17) only received conventional non-surgical mechanical therapy. The trial groups [(diode group (n = 16) and Er,Cr:YSGG group (n = 17)] received dental laser in addition to mechanical therapy. Gingival index (GI), plaque index (PI), bleeding on probing, probing depth (PD), MMP-9, and TIMP-1 levels were assessed at baseline (T0) and at 6months after treatment (T1). The GI, PI, and PD significantly decreased in all groups at T1, compared to T0 (p < 0.05). The decrease in the PD was similar between the control and diode groups with Er,Cr:YSGG providing more reduction (1.16 ± 0.64mm) than either method (p = 0.032). A significant intra-group decrease in MMP-9 level was only observed in the Er,Cr:YSGG group (p = 0.009). The decrease in TIMP-1 level from T0 to T1 was similar between the control and the diode groups (p > 0.05) and it was significantly lower than the decrease in the Er,Cr:YSGG group (p < 0.05). Addition of diode laser to non-surgical mechanical therapy does not provide any additional benefit for treatment outcomes. The Er,Cr:YSGG laser seems to be more efficient both at clinical and molecular levels. ClinicalTrials, ID: NCT04730687. Registered 13 April 2021. Retrospectively registered, https://clinicaltrials.gov/ct2/show/NCT04730687.

Evaluation of Surface Change and Roughness in Implants Lost Due to Peri-Implantitis Using Erbium Laser and Various Methods: An In Vitro Study.

The aim of our study was to obtain similar surface properties and elemental composition to virgin implants after debridement of contaminated titanium implant surfaces covered with debris. Erbium-doped:yttrium, aluminum, and garnet (Er:YAG) laser, erbium, chromium-doped:yttrium, scandium, gallium, and garnet (Er,Cr:YSGG) laser, curette, and ultrasonic device were applied to contaminated implant surfaces. Scanning electron microscopy (SEM) images were taken, the elemental profile of the surfaces was evaluated with energy dispersive X-ray spectroscopy (EDX), and the surface roughness was analyzed with profilometry. Twenty-eight failed implants and two virgin implants as control were included in the study. The groups were designed accordingly; titanium curette group, ultrasonic scaler with polyetheretherketone (PEEK) tip, Er: YAG very short pulse laser group (100 μs, 120 mJ/pulse 10 Hz), Er: YAG short-pulse laser group (300 μs, 120 mJ/pulse, 10 Hz), Er: YAG long-pulse laser group (600 μs, 120 mJ/pulse, 10 Hz), Er, Cr: YSGG1 laser group (1 W 10 Hz), Er, Cr: YSGG2 laser group (1.5 W, 30 Hz). In each group, four failed implants were debrided for 120 s. When SEM images and EDX findings and profilometry results were evaluated together, Er: YAG long pulse and ultrasonic groups were found to be the most effective for debridement. Furthermore, the two interventions have shown the closest topography of the sandblasted, large grit, acid-etched implant surface (SLA) as seen on virgin implants.

Evaluation of the Effect of Cavity Preparation Using Er,Cr:YSGG Laser on Microleakage of Class V Composite Restorations

Background: The application of laser in dentistry for medical purposes such as caries removal, preparation of restorative cavities, and dental surface treatment for more effective bonding of restorative materials to the tooth has been significant. The present experimental study aimed to evaluate the effect of cavity preparation on microleakage by using erbium, chromium-doped yttrium, scandium, gallium, and garnet (Er,Cr:YSGG) lasers, and to compare it with the effect of bur on microleakage in class V composite restorations. Methods: In this experimental study, 20 intact human premolar teeth were randomly divided into 2 equal groups according to the cavity preparation technique: G1: laser cavity preparation (LCP) using a Er,Cr:YSGG laser (Bio Lase, USA), and G2: bur cavity preparation (BCP). Standard class V cavity was prepared on both lingual and buccal surfaces in two groups. The samples underwent thermocycling for 3000 times (5-55ºC) and were immersed in a methylene blue 2% solution for 24 hours. After buccolingual sectioning from the middle of the restoration, a stereomicroscope with 20 x magnification was used to measure the penetration rate of the dye and to determine the score for microleakage. Data were analyzed using SPSS (version 16) software and Mann-Whitney U test (α=5%). Results: According to the study results, the minimum and maximum microleakage values were observed in the occlusal and gingival margins, respectively, which were identically for both groups. Comparing two groups (BCP and LCP) revealed that there was no significant difference between them in terms of microleakage values at the occlusal and gingival margins (P&gt;0.05). Conclusions: It was concluded that cavity preparation using Er,cr:YSGG laser had microleakage values similar to those found with conventional cavity preparation (bur) method in class V composite restorations.

Smear Layer Removal by Means of Erbium, Chromium:Yttrium Scandium Gallium Garnet (Er,Cr:YSGG) Laser Irradiation from Apical Third of Mesial Root Canals

Smear Layer Removal by Means of Erbium, Chromium:Yttrium Scandium Gallium Garnet (Er,Cr:YSGG) Laser Irradiation from Apical Third of Mesial Root Canals

Satisfactory treatment of mucocutaneous lesions in hereditary hemorrhagic telangiectasia patients with dual pulsed dye laser and neodymium: yttrium-aluminum-garnet.

Hereditary hemorrhagic telangiectasia (HHT) is characterized by telangiectasia and larger arteriovenous malformations (AVM) in different organs. Mucocutaneous telangiectasia can bleed and cause stigmatization, but the best treatment approach has not been defined yet. The aim of the study was to evaluate the efficacy and safety of dual pulsed dye laser and neodymium: yttrium-aluminum-garnet (PDL-Nd:YAG) laser treatment for mucocutaneous telangiectasia in HHT patients. It is a retrospective case series, where clinical files of all HHT patients treated with PDL-Nd:YAG laser at our Department between December 2010 and July 2019 were reviewed. Demographic, clinical, and treatment characteristics were recorded. The severity and degree of improvement were evaluated by three blinded examiners scoring pretreatment and posttreatment pictures on a 5-point scale. Patient satisfaction and procedure pain were assessed using an ordinal scale (0-10). Forty-three treatment areas from 26 patients were analyzed. Lesions were predominantly located on the lower lip and cheeks. The median number of laser sessions per patient was 3 (interquartile range [IQR] 2-4). The median global severity score at baseline was 2 and became 0 at endpoint (p < 0.0001), with a median improvement rate of 4 (IQR 3-4). All patients reported a high degree of satisfaction (median 9) and tolerable pain (median 5). In conclusion, dual PDL-Nd: YAG laser is a convenient, safe, and effective treatment option for mucocutaneous telangiectasia in HHT patients.