Gain Saturation Research Articles

Gain enhancement of perovskite nanosheets by a patterned waveguide: excitation and temperature dependence of gain saturation

Optical gain enhancement of two-dimensional CsPbBr3 nanosheets was studied when the amplified spontaneous emission is guided by a patterned structure of polyurethane-acrylate. Given the uncertainties and pitfalls in retrieving a gain coefficient from the variable stripe length method, a gain contour g(hslash omega ,x) was obtained in the plane of spectrum energy (ℏω) and stripe length (x), whereby an average gain was obtained, and gain saturation was analysed. Excitation and temperature dependence of the gain contour show that the waveguide enhances both gain and thermal stability due to the increased optical confinement and heat dissipation, and the gain origins were attributed to the two-dimensional excitons and the localized states.

Routes from stationary dissipative solitons to chaos in a Mamyshev oscillator

Mamyshev oscillators (MOs), a new type of femtosecond fiber laser, can produce not only high-performance stationary dissipative solitons (SDSs), but also exhibit chaotic dynamics. Since chaotic behavior may lead to dramatic degradation of the performance, it is particularly important to investigate chaotic dynamics in MOs. Here, using numerical simulation and experimental research methods, we systematically investigate different routes from SDSs to chaos in an MO. Specifically, by simply increasing the gain saturation energy under different polarization states, we obtained different routes from SDSs to chaos, including via a cascade of period-doubling bifurcations (CPDB), via a quasi-cascade of period-doubling bifurcations, and via a double CPDB. In addition, the evolution from dissipative soliton molecules to chaos via CPDB was also observed by increasing the gain saturation energy with a small filter wavelength separation. This finding shows that the evolution from SDSs to chaos is a generic property of laser systems and can appear in various pulse patterns such as single pulse, dissipative soliton molecules, and harmonic mode-locking pulses, which may be beneficial for better understanding chaotic dynamics in MOs.

Nonlinear topological laser on the non-Hermitian Haldane model with higher-order corner states.

The non-Hermitian skin effect (NHSE) on the non-Hermitian Haldane model with gain and loss on the honeycomb lattice with the outline of a triangle is discussed. The NHSE only occurs on the edge of the lattice, transforming the edge modes into the higher-order corner modes. The NHSE can also occur on a lattice with only loss, which can be treated as a lattice with gain and loss as well as a global loss added to it. When the saturated gain is added to the three corner sites of the dissipative lattice, a single-mode laser system is obtained. When any one site is stimulated initially, the system will reach a saturated state depending on the distribution of the corner modes, and the stable laser light is emitted by sites at the corners.

Restoration of saturated outputs from microchannel plate photomultiplier tubes in sub-microsecond single-pulse-current mode

Microchannel plate (MCP) photomultiplier tubes (PMTs) are frequently used in experimental diagnostics, where they are operated in single-pulse current measurement mode. However, considering the significant amplitude fluctuations in the measured signal, the resulting output signal from the MCP-PMT is inevitably distorted by gain saturation. Therefore, understanding the correlation between the MCP-PMT output signal and gain saturation is critical in assessing the extent of output signal distortion and determining the MCP-PMT saturation level. This knowledge allows for a more precise assessment of the input signal's features. In this paper, we present an experimental method for restoring the initial waveform from the saturated MCP-PMT signal. To correct the amplitude-drop caused by gain saturation, our technique involves calibrating the MCP-PMT's relative gain as a function of the accumulated output charge using a square-wave light source. We then applied this approach to restore a ∼500 ns saturated pulse from a double-layer 10 mm diameter MCP-PMT. The restored signal showed a deviation of less than 6% from the reference waveform, which validates the effectiveness of the technique.

Radiation-resistant cerium co-doped erbium-doped fibers for C- and L-band amplifiers in a high-dose gamma-radiation environment.

We experimentally demonstrate a comparative study on the radiation-resistant cerium (Ce) co-doped erbium-doped fiber amplifiers (EDFAs) exposed to a high-dose gamma-radiation environment of 1.8 kGy/h dose rate in the C and L bands. Our results show that Ce is an effective co-dopant in the aluminosilicate EDFs for suppressing radiation-induced attenuation (RIA) of more than an order of magnitude lower than the Ce-free EDF. After exposure to a high-dose gamma-radiation of up to 10 kGy, the Ce co-doped EDF still exhibits good radiation tolerance, providing 41.6 ± 2.9 dB gain and 5 ± 0.8 dB NF from 1535-1560 nm for a -25 dBm input signal. In the L-band, we report, for the first time, the radiation-resistant EDFA with the radiation-induced gain degradation (RIGD) of 3.7 dB under 2.5 kGy irradiation and 4.4 dB under 10 kGy irradiation at 1600 nm. Also, the radiation-dependent gain coefficient and gain saturation were studied in the C and L bands. A comparison of different Ce co-doped EDFs exposed to different total gamma doses reveals the radiation impact on the amplifier performance, indicating the feasibility of using Ce co-doped EDFs for space-based optical communications, requiring robust radiation stability.

Demonstration of a 263-GHz Traveling Wave Tube for Electron Paramagnetic Resonance Spectroscopy.

In this letter, a 263 GHz traveling wave tube for electron paramagnetic resonance spectroscopy is designed, fabricated and tested. A periodic permanent magnet focused pencil beam electron optical system is adopted. A folded waveguide slow-wave structure with modified serpentine bends is optimized to provide high-power wideband performance and stable operation. An experiment has been performed to verify the analysis results and confirm the amplifier stability. The device provides a maximum 11.9 W saturation output power and 25.5 dB saturation gain. Although the available solid-state signal source is unable to drive the amplifier to saturation beyond 260 - 264 GHz, 10 W output power over 5.6 GHz bandwidth has been measured.

Frequency‐Modulated Combs via Field‐Enhancing Tapered Waveguides

AbstractFrequency‐modulated (FM) combs feature flat intensity spectra with a linear frequency chirp, useful for metrology and sensing applications. Generating FM combs in semiconductor lasers generally requires a fast saturable gain, usually limited by the intrinsic gain medium properties. Here, it is shown how a spatial modulation of the laser gain medium can enhance the gain saturation dynamics and nonlinearities to generate self‐starting FM combs. This is demonstrated with tapered planarized terahertz (THz) quantum cascade lasers (QCLs). While simple ridge THz QCLs typically generate combs presenting a mixture of amplitude and frequency modulation, the on‐chip field enhancement resulting from extreme spatial confinement leads to an ultrafast saturable gain regime, generating a pure FM comb with a flatter intensity spectrum and a clear linear frequency chirp. The observed linear frequency chirp is reproduced using a spatially inhomogeneous mean‐field theory model, which confirms the crucial role of field enhancement. In addition, the modified spatial temperature distribution within the waveguide results in an improved high‐temperature comb operation, up to a heat sink temperature of 115 K, with comb bandwidths of 600 GHz at 90 K. The spatial inhomogeneity leads as well to very intense radio frequency (RF) beatnotes up to ‐30 dBm and facilitates dynamic switching between various harmonic states in the same device.

Flat-gain L-band amplifier containing AlPO4 units in aluminophosphosilicate erbium-doped fibers.

We present a flat-gain single-stage L-band erbium-doped fiber amplifier (EDFA) with a gain ripple of ±0.7 dB from 1580 to 1615 nm, by using aluminophosphosilicate erbium-doped fiber (APS-EDF) with an estimated AlPO4 composition of 13.3 mol%. A series of APS-EDFs were fabricated with increasing AlPO4 and Er concentrations, while maintaining a low background loss of 0.031 ± 0.005 dB/m and preventing Er ion clustering. The spectroscopic study shows a slightly narrowing Er cross section and flattened emission cross-section spectrum in the L-band with more AlPO4, thus favoring the L-band amplification with an improved gain flatness. Also, the gain coefficient, gain saturation, and temperature-dependent gain characteristics were reported. A better temperature tolerance was observed with increasing AlPO4.

Intensity coupling characteristics of dual-longitudinal mode ring lasers with Ne dual-isotope.

The intensity coupling characteristics of Ne dual-isotope inflation and dual-longitudinal-mode operation ring lasers were investigated based on the Lamb theory. Considering the contribution of the Ne isotope system to the polarization of the gain medium and gain saturation effects, the frequency coupling effects were analyzed. Combined with the plasma dispersion function, the optical cavity length is 0.47 m, Ne20: Ne22= 0.53:0.47; the frequency spacing of the adjacent longitudinal mode is 640 MHz, and the intensity tuning curve of the ring laser is simulated. The alterations in the gain self-saturation and mutual saturation coefficients between the four frequencies generated via dual-longitudinal mode splitting are comprehensively discussed. Finally, a detection experiment for the intensity-tuning curve is designed to verify the theoretical analysis.

Neural networks-based adaptive tracking control for full-state constrained switched nonlinear systems with periodic disturbances and actuator saturation

In this paper, an adaptive tracking control approach is developed for full-state constrained switched nonlinear systems that have actuator saturation, periodic disturbances and unknown control direction. To deal with the full-state constraints, the Barrier Lyapunov functions are introduced to limit the state variables within the corresponding constraint conditions. Meanwhile, the Fourier series expansion technology is employed to deal with unknown periodic disturbances and unknown nonlinear dynamics jointly. Additionally, a Nussbaum-type function is used in the controller design to cope with the and unknown control gain and input saturation. On the basis of the Lyapunov stability theory, it is demonstrated rigorously that all signals of the closed-loop system are uniformly ultimately bounded, and the proposed controller ensures that the tracking error is kept within a compact set close to zero. In the end, the validity of the designed control protocol is verified by a simulation example.

Meterscale Strong Coupling between Magnons and Photons.

We experimentally realize a meterscale strong coupling effect between magnons and photons at room temperature, with a coherent coupling of ∼20 m and a dissipative coupling of ∼7.6 m. To this end, we integrate a saturable gain into a microwave cavity and then couple this active cavity to a magnon mode via a long coaxial cable. The gain compensates for the cavity dissipation, but preserves the cavity radiation that mediates the indirect photon-magnon coupling. It thus enables the long-range strong photon-magnon coupling. With full access to traveling waves, we demonstrate a remote control of photon-magnon coupling by modulating the phase and amplitude of traveling waves, rather than reconfiguring subsystems themselves. Our method for realizing long-range strong coupling in cavity magnonics provides a general idea for other physical systems. Our experimental achievements may promote the construction of information networks based on cavity magnonics.

Reversed Cherenkov radiation amplifier with compact structure and high efficiency

Based on the reversed Cherenkov radiation excited in metamaterials, a novel S-band reversed Cherenkov radiation amplifier (RCRA) with two output ports is proposed in this paper. Its metamaterial slow-wave structure (MSWS) consists of a hollow circular waveguide periodically loaded with all-metal double-ridge complementary electric split-ring resonators (CeSRRs). The CeSRR exhibits subwavelength and strong resonance characteristics, which lead to miniaturization and high interaction impedance of the MSWS. The period of the MSWS is optimized using the phase velocity jump technique to further increase the output power and electronic efficiency. The simulation results demonstrate that when the microwave signal of 7.8 W at 2.286 GHz is inputted at port 2, the output power at port 1 is 307 W, and the saturated output power and saturated gain at port 3 are 5.48 kW and 28.47 dB, respectively. Notably, the total electronic efficiency of the RCRA is predicted as 33.84%. The RCRA features high electronic efficiency and miniaturization and may meet special application scenarios that require two output microwave signals at the same frequency.

Enhancing the Spectral Characteristics of Rhodamine 610 Laser Dye Doped with Chemically Prepared Gold Nanoparticles

In this study, gold nanoparticle samples were prepared by the chemical reduction method (seed-growth) with 4 ratios (10, 12, 15 and 18) ml of seed, and the growth was stationary at 40 ml. The optical and structural properties of these samples were studied. The 18 ml seed sample showed the highest absorbance. The X- ray diffraction (XRD) patterns of these samples showed clear peaks at (38.25o, 44.5o, 64.4o, and 77.95o). The UV-visible showed that the absorbance of all the samples was in the same range as the standard AuNPs. The field emission-scanning electron microscope (FE-SEM) showed the shape of AuNPs as nanorods and the particle size between 30-50 nm. Rhodamine-610 (RhB) was prepared at 10-5 M concentration, the optical measurements were studied, AuNPs and RhB were mixed at ratios (1:1, 1:2, 1:3), and the fluorescence measurements were done. Full width at half maximum (FHWM) and the intensity of RhB after mixing were changed, and this result showed significant efficacy for many applications. The study shows that this mixing could be used after doping with polymer as a random gain medium or saturation absorber for pulse laser generation.

Transoral Endoscopy-Assisted Tongue-Lip Adhesion With Modified Tongue Base Suspension in a Pierre-Robin Sequence: A Safe and Effective Technique.

Life-threatening airway obstruction is a major concern in patients with Pierre-Robin sequence. Tongue-lip adhesion (TLA) has been used to manage airway obstruction. The authors present the case of a female neonate with Pierre-Robin sequence who presented with airway obstruction and a cleft palate. She underwent a TLA procedure with modified tongue base suspension (TBS). Endoscopy was used to check and control the traction of the tongue base to enable unobstructed self-ventilation. Positive outcomes including improved O2 saturation and weight gain were noted. The effectiveness of TLA was enhanced by using TBS with real-time endoscopy to evaluate the oropharyngeal airway space required to alleviate airway obstruction. The use of endoscopy enabled us to check and determine how much the tongue base should be tracted by manipulating the tongue anteriorly and posteriorly. The authors report transoral endoscopy-assisted TLA and modified TBS.

Performance-enhanced time-delayed photonic reservoir computing system using a reflective semiconductor optical amplifier.

We propose a time-delayed photonic reservoir computing (RC) architecture utilizing a reflective semiconductor optical amplifier (RSOA) as an active mirror. The performance of the proposed RC structure is investigated by two benchmark tasks, namely the Santa Fe time-series prediction task and the nonlinear channel equalization task. The simulation results show that both the prediction and equalization performance of the proposed system are significantly improved with the contribution of RSOA, with respect to the traditional RC system using a mirror. By increasing the drive current of the RSOA, the greater nonlinearity of the RSOA gain saturation is achieved, as such the prediction and equalization performance are enhanced. It is also shown that the proposed RC architecture shows a wider consistency interval and superior robustness than the traditional RC structure for most of the measured parameters such as coupling strength, injection strength, and frequency detuning. This work provides a performance-enhanced time-delayed RC structure by making use of the nonlinear transformation of the RSOA feedback.

Study of transition dynamics from breathing single pulse to higher-order pulses and hysteresis in a figure-of-9 fiber laser

This study investigates the nonlinear dynamics and hysteresis phenomena in a figure-of-9 fiber laser. The laser cavity consists of an Erbium doped nonlinear amplifying loop mirror (NALM) containing a Dispersion Compensation Fiber (DCF) segment, coupled to a nonlinear optical loop mirror (NOLM). A lumped-element model is developed for the laser cavity accounting for bi-directional light propagation. The model is based on the modified nonlinear Schrödinger equation (NLSE) with coefficients directly related to the parameters of each cavity segment. Gain saturation is taken into consideration for stable laser operation. The numerical results show that self-starting passive mode-locking and self-structuration of soliton lattices occur in the cavity of the laser. The soliton structuring is based on the concept of dissipative solitons, which requires a balance between dispersion-nonlinearity and gain-loss. The gain-loss parameters influence both the temporal pulse interactions and the NALM’s transmission, leading to a large variety of single and multiple breathing dissipative soliton dynamics. In that context, riveting studies of the transition dynamics from breathing single pulses to high-order multiple breathing dissipative solitons and hysteresis with respect to unsaturated amplifier gain in a figure-of-9 all-fiber laser are explored.

Effect of Gain Saturation on Wideband WDM Signal in PPLN-Based Optical Parametric Amplifier

The periodically poled LiNbO <sub xmlns:mml="http://www.w3.org/1998/Math/MathML" xmlns:xlink="http://www.w3.org/1999/xlink">3</sub> (PPLN) based optical parametric amplifier (OPA) is a technology that contributes to the construction of multi-band wavelength-division multiplexing (WDM) optical networks thanks to its wide amplification bandwidth and wavelength conversion function. In addition, the fast response of the OPA means it is unaffected by sudden changes of wavelength channels due to dynamic channel add-drop. However, such fast response leads to nonlinear signal distortion when operating in the gain saturation region. This paper experimentally investigates the conversion of gain saturation into the nonlinear amplitude distortion in a 64-Gbaud 64QAM WDM signal. We characterized the input power tolerance of a PPLN-based OPA in wideband WDM applications and found that the nonlinear amplitude distortion can be suppressed by increasing the number of WDM channels. For a 75-GHz-spacing 64-channel WDM configuration, the total input power tolerance was improved by ∼10 dB compared to a single-channel case. We also confirmed that there is almost no wavelength dependence of the effect of gain saturation on the signal distortion. These results show that PPLN-based OPAs have a wide total input power range for amplifying wideband WDM signals in terms of the nonlinear distortion.

Theoretical Design of a Dual-Band TE01/TE02 Mode Gyrotron Traveling Wave Tube

A dual-band (K/Ka) TE01/TE02 mode gyrotron traveling wave tube is presented in this article. To suppress parasitic oscillations, a lossy-dielectric-loaded interaction circuit is employed. The particle-in-cell simulation results show that when it operates in K-band, the operating mode is the TE01 mode, with a peak output power of 87.1 kW, a saturated gain of 42.74 dB, and a −3 dB bandwidth of 0.7 GHz, and when it operates in Ka-band, the operating mode is the TE02 mode, with a peak output power of 62 kW, a saturated gain of 60.76 dB, and a −3 dB bandwidth of 2 GHz. Moreover, in the operating frequency range of the Ka-band, the overall gain is greater than 57 dB. To meet the requirements of dual-band operating, a dual-state magnetic injection gun is designed, a dual-mode coaxial cavity input coupler is proposed, and a dual-band output system is developed. All of these components showed excellent performance in simulations.

Temporal Cavity Soliton Interaction in Passively Mode-Locked Semiconductor Lasers

Weak interactions of temporal cavity solitons resulting from gain saturation and recovery in a delay differential model of a long cavity semiconductor laser were studied numerically and analytically using an asymptotic approach. This paper shows that in addition to the usual soliton repulsion leading to a harmonic mode-locking regime, soliton attraction is also possible in a laser with a nonzero linewidth enhancement factor. It is shown numerically that this attraction can lead either to pulse merging or to pulse bound-state formation.

A Dual Load-Modulated Doherty Power Amplifier Design Method for Improving Power Back-Off Efficiency.

In this paper, the load modulation process of a Doherty power amplifier (DPA) is analyzed to address the issue of why designed DPAs have a very low efficiency in the back-off state in some cases. A general formula of the real load modulation process is also given for analyzing the load modulation of a peak PA matching network. This provides a new perspective for improving the back-off efficiency of a DPA. To improve the power back-off efficiency of a DPA, a dual load-modulated DPA (D-DPA) design method is proposed. The core principle of the proposed design method is to control the load modulation process from the carrier PA to the peaking PA based on the design method of the traditional two-way DPA. The efficiency of the peaking PA in the back-off region is enhanced, thereby improving the efficiency in the entire back-off region of the DPA. Based on the proposed design method, a D-DPA operating at 2 GHz is designed and fabricated. The test results show that the saturated output power and gain are 43.7 dBm and 9.7 dB, respectively, while the efficiency at 6 dB output power back-off is 59.2%. The designed D-DPA eliminates the efficiency pit of the traditional two-way DPA in the output power back-off region.