Surface Functionalization Research Articles

Surface Chemistry Induced IgG Unfolding and Modulation of Immune Responses.

Immunoglobulin G (IgG) comprises a significant portion of the protein corona that forms on biomaterial surfaces and holds a pivotal role in modulating host immune responses. To shed light on the important relationship between biomaterial surface functionality, IgG adsorption, and innate immune responses, we prepared, using plasma deposition, four surface coatings with specific chemistries, wettability, and charge. We found that nitrogen-containing coatings such as these deposited from allylamine (AM) and 2-methyl-2-oxazoline (POX) cause the greatest IgG unfolding, while hydrophilic acrylic acid (AC) surfaces allowed for the retention of the protein structure. Structural changes in IgG significantly modulated macrophage attachment, migration, polarization, and the expression of pro- and anti-inflammatory cytokines. Unfolded IgG on the POX and AM surfaces enhanced macrophage attachment, migration, extracellular trap release, and pro-inflammatory factors production such as IL-6 and TNF-α. Retention of IgG structure on the AC surface downregulated inflammatory responses. The findings of this study demonstrate that the retention of protein structure is an essential factor that must be taken into consideration when designing biomaterial surfaces. Our study indicates that using hydrophilic surface coatings could be a promising strategy for designing immune-modulatory biomaterials for clinical applications.

Polyphosphate-Mediated Crystallographic and Colloidal Stabilization of CuS Nanoparticles: Enhanced NIR-Responsive Chemo-Photothermal Efficacy.

Photothermal therapy (PTT) is an emerging treatment modality for cancer management. However, the photothermal agents (PTAs) used in PTT should have sufficient biocompatibility, water dispersibility, and good photoresponsive. In this aspect, water-dispersible and biocompatible linear polyphosphate (LP)-functionalized CuS nanoparticles (LP-CuS NPs) were developed using sodium tripolyphosphate (LP molecule) as a surface passivating agent. The successful formation of the green covellite CuS phase was confirmed by X-ray diffraction and TEM analyses, and its surface functionalization with the LP ligand was evident from X-ray photoelectron spectroscopy, Fourier transform infrared, thermogravimetric analysis, and light scattering measurements. It has been found that the use of LP not only stabilizes the crystallographic covellite CuS phase by overcoming the requirement of a soft ligand but also provides long-term aqueous colloidal stability, which is essential for PTT applications. The aqueous suspension of LP-CuS NPs showed excellent heating efficacy under near infrared (NIR) light irradiation (980 nm) and has a strong binding affinity towards anticancer drug, doxorubicin hydrochloride (DOX). The drug-loaded systems (DOX@LP-CuS NPs) revealed a pH-dependent drug release behavior with higher concentrations in a mild acidic environment. The in vitro studies showed substantial cellular uptake of DOX-loaded systems in cancer cell lines and enhanced toxicity towards them upon irradiation of NIR light through apoptotic induction, suggesting their potential application in chemo-photothermal therapy.

First biological response on polyAcrylic Acid UV-grafted PDMS surface: Towards medical application

Several biomedical devices and implants are made with Poly(dimethyl siloxane) (PDMS) or include it. Its biocompatibility, transparency, thermal stability and low cost are some of the properties that made PDMS suitable for biomedical applications. However, some properties such as its hydrophobic character can lead to complications owing to bacteria adhesion for instance. For breast implant, which is implanted for a long-time, an enhanced surface integration can be needed to avoid bacterial biofilm formation and degeneration. In microfluidic systems or for catheters, the biofouling phenomena must be avoided. Surface covalent functionalization with bioactive polymers is an attractive strategy to fight these issues. This study deals with poly(acrylic) acid UV-grafting on PDMS surfaces. After chemical and mechanical characterizations, this work has focused on biological response occurring on the functionalized material. The results show slowdown fibroblasts proliferation. Investigation around protein (BSA, fibronectin, fibrinogen) adhesion, made possible to approach surface mechanism understanding. FTIR and water contact angle analysis highlighted the different protein affinity towards surface. These results provide clues about protein orientation on the surface, in order to adapt the surface functionalization to target a specific application.

Novel Efficient and Eco‐Friendly Biosorbent Derived from Ditax (Detarium senegalense) Fruit Hulls for Removal of Cationic Dyes: Adsorption Modeling and Statistical Optimization

AbstractRemediation of wastewater laden with dyes using optimized and less expensive techniques remains a challenge for environmental protection. In the current research work, alkaline activation approach was employed to derive a biosorbent from ditax fruit hulls (DS‐FHB), and its sorption performance was tested on Methylene blue (MB) dye biosorption with optimizing adsorption parameters. Structural and chemical properties of DS‐FHB including crystallinity, morphology, and surface functionality were analysed using XRD, SEM, FTIR technics, and pHPZC determination. Optimization of adsorption parameters using a centered composite design (CCD) from response surface methodology led to achieving a peak dye removal rate of 98.97 %. The optimal conditions were determined as DS‐FHB mass of 0.23 g, pH 7.12, contact time 39.00 min, and initial MB concentration of 69.35 mg/L. The findings demonstrated a strong alignment with both the Langmuir isotherm and pseudo‐second order kinetic model, suggesting their appropriateness in describing the adsorption process of MB onto DS‐FHB. According to the Langmuir isotherm model, the sorption of MB dye onto DS‐FHB occurred by monolayer formation with a maximum dye sorption capacity of 96.453 mg/g. Based on the structural and physico‐chemical properties of DS‐FHB biosorbent, and its adsoption applicability evaluated in the experimental conditions, detax derived‐biosorbent can be proposed as a successful and effective low‐cost biosorbent for removing cationic dyestuffs from aqueous solutions.

Surface‐Reengineering of BNNs@Hydrocarbon Polymer Composites for Ultra‐Low Dielectric Constant for High‐Frequency Applications

AbstractThis research investigates the synthesis and evaluation of cyclic olefin copolymer (COC) composites with surface‐engineered boron nitride nanosheets (BNNs) at various concentrations. The study focuses on the impact of Cetyltrimethylammonium bromide (CTAB) on BNNs′ surface functionalization to improve their dispersion within the COC matrix, including its dielectric behavior, dielectric breakdown strength, thermal management capabilities, hygroscopic properties, and mechanical robustness. The methodological approach adopted for the fabrication of COC/BNNs hybrid composites commenced with the synthesis of BNNs, surface functionalization of BNNs, in‐situ mixing and hot‐press. This step aimed to enhance compatibility and adhesion between BNNs and the COC matrix, facilitating more homogeneous nanofiller dispersion. The investigative scope of this study encompassed a rigorous evaluation of the resultant composites, with a particular emphasis on their dielectric properties. The dielectric constant (ϵ′) and loss tangent (δ) were measured at a frequency of 10 GHz, revealing an ultra‐low dielectric constant of 1.28, an exceptionally minimal loss tangent of 0.000146, a remarkable 327% (In‐plane) & 129% (axial) increase of thermal conductivity, significant improvement of dielectric breakdown strength up to 88.4 mV/mm, and low water absorptions observed. These results indicate the potential of COC/BNNs composites for high‐frequency electronic packaging applications requiring low dielectric constants.

Biomedical Metal–Organic framework materials on antimicrobial therapy: Perspectives and challenges

As a barrier between the structure of the human body's internal organs and the outside environment, the skin serves crucial physiological tasks like protection, regulation, and metabolism. The skin's close interaction with the outside makes it particularly vulnerable to many injuries. Bacterial infections cause wound healing to take longer, raise the risk of chronic harm, and serve as a breeding ground for drug-resistant bacteria. As a result, it is critical to eliminate bacterial species from the wound region rapidly and efficiently. Metal-organic frameworks (MOFs), are critically adjustable hybrid materials that integrate organic ligands with coordination metals to generate a range of topologically isomorphic structures. MOFs' creation and shape are investigated by the metal source and ligand utilized in the reaction process, and the structural benefits of this near-infinite combination of structures allow boundless potential for their surface functionalization. MOF has a large effective surface area, tunable structure, adaptability, excellent biodegradability, high drug load, adjustable release of drugs, robust targeting, etc. It can be loaded with therapeutic materials and has programmability. It is more conducive to treating complex wounds while realizing the synergistic effects of antibacterial, anti-inflammatory, and pro-angiogenesis, effectively improving treatment safety. This review summarizes the most recent research advances on various MOFs for antimicrobial therapy, using diverse types of metal-ion-based MOFs as an entry point. Finally, it covers several important challenges in the antimicrobial treatment of metal-ion-based MOFs.

Crosslinked polyetherimide based electrospun membrane: Effect of fibre morphology on hot oil sorption

Handling hot oil spillage, particularly from oil refineries, petrochemical industry and automobiles is challenging and there have been limited solutions to address the issue. Polyetherimide (PEI) electrospun fibrous membranes were developed in this study by leveraging PEI's high-temperature stability to serve as promising materials for hot oil sorption. The morphology of the membrane forming fibers varied from circular to dumbbell shaped, by judicious choice of solvents of varying boiling points, to study the effect of fiber morphology on oil sorption capacity. Crosslinking of PEI membranes was carried out using ethylenediamine (EDA) to impart structural integrity and resiliency to the membranes. The PEI membrane composed of dumbbell-shaped fibers demonstrated an oil-sorption capacity of 25.4 ±1.5 g/g for engine oil at 150°C within one hour, outperforming a commercial polypropylene (PP) nonwoven absorbent, which failed and collapsed under the same high-temperature conditions. Enhanced oil sorption in the dumbbell-shaped fibrous membrane was achieved due to its lower tortuosity, aligned inter-fiber channels, and higher capillary pressure. Usefulness and sorption capacity of PEI based electrospun membranes may further be explored for controlling the oil spillage through introduction of specific surface features and functionalization.

Functionalization of nanostructured surfaces: From the impact on morphological control during synthesis to the effect on colloidal dispersion

Functionalization of nanostructured surfaces: From the impact on morphological control during synthesis to the effect on colloidal dispersion

Microstructure and topography of laterally confined porous anodic oxides produced with high growth rate in a maskless two-phase jet setup

AbstractMaskless anodic oxidation with a continuous free jet of electrolyte can be used for the local surface functionalization and structuring of aluminum materials. In this study, a two-phase jet was applied with the aim of enhanced lateral confinement of the anodic oxide on the aluminum alloy EN AW-7075. The two-phase jet was realized by a coaxial arrangement. While the inner electrolyte nozzle with a diameter of 100 µm acted as the cathode and was used to provide the electrolyte with a flow rate of 10 ml min−1 resulting in an average jet velocity of approximately 21 m s−1, the outer nozzle with a diameter of 3000 µm was used to provide deionized water with a flow rate of 383 ml min−1 resulting in an average water jet velocity of 1 m s−1, which is sufficient to realize a continuous free two-phase jet. Process voltages from 10 to 60 V were investigated. The realized oxide layers were characterized by non-destructive as well as destructive methods to determine their microstructure and their thicknesses. Optically transparent anodic oxide layers were achieved in the voltage range between 10 and 25 V. Maximum total layer thicknesses between 1.1 µm and 16.9 µm were measured in these cases. Thicknesses of more than 50 µm were determined for higher voltages up to 60 V; however, burning effects and stronger discolorations were determined for voltages ranging from 30 to 60 V. Consequently, 25 V was derived as best suitable voltage for two-phase anodizing with high growth rate leading to oxide layers with low defects. Graphical abstract

Positron Emission Tomography‐Assisted Photothermal Therapy with Gold Nanorods

AbstractPhotothermal anticancer therapy based on plasmonic nanoparticles is proposed to enhance treatment efficacy while mitigating unintended side effects. However, most studies blindly rely on the accumulation of nanoparticles at the tumor site, which may result in inefficient treatment. In this study, the aim is to evaluate relevant parameters to improve plasmonic photothermal therapy. Gold nanorods (AuNRs) with an optimized aspect ratio and either amino or carboxylic acid surface functionalization are selected as photothermal agents. AuNR biocompatibility and photothermal activity in 2D and 3D human MDA‐MB‐231 triple‐negative breast cancer cell models, evaluating localized hyperthermal cell death upon irradiation with resonant near‐infrared (NIR) light, are analyzed first. To ensure reliable tracking of biodistribution in vivo, AuNRs are labeled with the positron emitter copper‐64 (64Cu), and their distribution in a murine MDA‐MB‐231 tumor model is studied via positron emission tomography (PET) imaging. PET images reveal enhanced tumor accumulation of carboxylic acid‐functionalized AuNRs compared to amino‐functionalized AuNRs post‐intravenous administration. Relatively low NIR laser power densities (0.5 W cm−2) are used for controlled heating – keeping local temperature below 50 °C – upon irradiation of intravenously and intratumorally administered AuNRs. As a result, tumor growth is significantly decelerated, even 9 days after application of photothermal therapy.

Tailor-Made Gold Nanomaterials for Applications in Soft Bioelectronics and Optoelectronics.

In modern nanoscience and nanotechnology, gold nanomaterials are indispensable building blocks that have demonstrated a plethora of applications in catalysis, biology, bioelectronics, and optoelectronics. Gold nanomaterials possess many appealing material properties, such as facile control over their size/shape and surface functionality, intrinsic chemical inertness yet with high biocompatibility, adjustable localized surface plasmon resonances, tunable conductivity, wide electrochemical window, etc. Such material attributes have been recently utilized for designing and fabricating soft bioelectronics and optoelectronics. This motivates to give a comprehensive overview of this burgeoning field. The discussion of representative tailor-made gold nanomaterials, including gold nanocrystals, ultrathin gold nanowires, vertically aligned gold nanowires, hard template-assisted gold nanowires/gold nanotubes, bimetallic/trimetallic gold nanowires, gold nanomeshes, and gold nanosheets, is begun. This is followed by the description of various fabrication methodologies for state-of-the-art applications such as strain sensors, pressure sensors, electrochemical sensors, electrophysiological devices, energy-storage devices, energy-harvesting devices, optoelectronics, and others. Finally, the remaining challenges and opportunities are discussed.

Organic Donor-Acceptor-Donor Trimers Nanoparticles Stabilized by Amphiphilic Block Copolymers for Photocatalytic Generation of H2.

Photocatalytic generation of H2 via water splitting emerges as a promising avenue for the next generation of green hydrogen due to its low carbon footprint. Herein, a versatile platform is designed to the preparation of functional π-conjugated organic nanoparticles dispersed in aqueous phase via mini-emulsification. Such particles are composed of donor-acceptor-donor (DAD) trimers prepared via Stille coupling, stabilized by amphiphilic block copolymers synthesized by reversible addition-fragmentation chain transfer polymerization. The hydrophilic segment of the block copolymers will not only provide colloidal stability, but also allow for precise control over the surface functionalization. Photocatalytic tests of the resulting particles for H2 production resulted in promising photocatalytic activity (≈0.6mmol g-1 h-1). This activity is much enhanced compared to that of DAD trimers dispersed in the water phase without stabilization by the block copolymers.

An Osteoimmunomodulatory Biopatch Potentiates Stem Cell Therapies for Bone Regeneration by Simultaneously Regulating IL-17/Ferroptosis Signaling Pathways.

Currently, there are still great challenges in promoting bone defect healing, a common health problem affecting millions of people. Herein an osteoimmunity-regulating biopatch capable of promoting stem cell-based therapies for bone regeneration is developed. A totally biodegradable conjugate is first synthesized, which can self-assemble into bioactive nano micelles (PPT NMs). This nanotherapy effectively improves the osteogenesis of periodontal ligament stem cells (PDLSCs) under pathological conditions, by simultaneously regulating IL-17 signaling and ferroptosis pathways. Incorporation of PPT NMs into biodegradable electrospun nanofibers affords a bioactive patch, which notably improves bone formation in two rat bone defect models. A Janus bio patch is then engineered by integrating the bioactive patch with a stem cell sheet of PDLSCs. The obtained biopatch shows additionally potentiated bone regeneration capacity, by synergistically regulating osteoimmune microenvironment and facilitating stem cell differentiation. Further surface functionalization of the biopatch with tannic acid considerably increases its adhesion to the bone defect, prolongs local retention, and sustains bioactivities, thereby offering much better repair effects in rats with mandibular or cranial bone defects. Moreover, the engineered bioactive patches display good safety. Besides bone defects, this osteoimmunity-regulating biopatch strategy can be applied to promote stem cell therapies for spinal cord injury, wound healing, and skin burns.

Aminolysis-mediated single-step surface functionalization of poly (butyl cyanoacrylate) microbubbles for ultrasound molecular imaging

Molecular ultrasound imaging with actively targeted microbubbles (MB) proved promising in preclinical studies but its clinical translation is limited. To achieve this, it is essential that the actively targeted MB can be produced with high batch-to-batch reproducibility with a controllable and defined number of binding ligands on the surface. In this regard, poly (n-butyl cyanoacrylate) (PBCA)-based polymeric MB have been used for US molecular imaging, however, ligand coupling was mostly done via hydrolysis and carbodiimide chemistry, which is a multi-step procedure with poor reproducibility and low MB yield. Herein, we developed a single-step coupling procedure resulting in high MB yields with minimal batch-to-batch variation. Actively targeted PBCA-MB were generated using an aminolysis protocol, wherein amine-containing cRGD was added to the MB using lithium methoxide as a catalyst. We confirmed the successful conjugation of cRGD on the MB surface, while preserving their structure and acoustic signal. Compared to the conventional hydrolysis protocol, aminolysis resulted in higher MB yields and better reproducibility of coupling efficiency. Optical imaging revealed that under flow conditions, cRGD- and rhodamine-labelled MB, generated by aminolysis, specifically bind to tumor necrosis factor-alpha (TNF-α) activated endothelial cells in vitro. Furthermore, US molecular imaging demonstrated a markedly higher binding of the cRGD-MB than of control MB in TNF-α activated mouse aortas and 4T1 tumors in mice. Thus, using the aminolysis based conjugation approach, important refinements on the production of cRGD-MB could be achieved that will facilitate the production of clinical-scale formulations with excellent binding and ultrasound imaging performance.Graphical

Exploring Carbon Nanotubes as Antimicrobial Agents: Efficacy, Toxicity, Challenges, and Future Prospects

Carbon nanotubes (CNTs), including single-walled carbon nanotubes (SWNTs), have been integrated into pharmaceutical and medical domains as drug delivery systems since the turn of the twenty-first century. Their capacity to effectively transport diverse therapeutics across membranes and into living cells has sparked interest in medicinal applications encompassing enhanced imaging, antimicrobial solutions, tissue regeneration, and targeted medication or gene delivery. Amidst the wealth of evidence showcasing the advantages of CNTs, such as heightened efficacy and reduced side effects, recent studies have unveiled unforeseen toxicities linked to their usage. Notably, the antimicrobial potential of CNTs has garnered significant attention, promising novel strategies for combating microbial infections. This mini review presents a synthesis and discussion of both the antimicrobial attributes and potential toxicity associated with carbon nanotubes. Despite their promising potential, several challenges stand as important considerations, deciphering the precise mechanisms through which CNTs exert their antibacterial effects remains a complex puzzle and ensuring the biocompatibility and safety of CNTs, both in terms of host cells and the environment, is paramount for clinical translation. Lastly, navigating regulatory pathways and standardization efforts will be integral for realizing the scope of CNTs as antimicrobial agents. The multifaceted nature of CNTs' antibacterial attributes underscores the complexity of their interactions within various systems. Addressing challenges through surface functionalization to enhance hydrophilicity and biocompatibility underscores a strategic approach for future exploration. As research progresses, carbon nanotubes hold the potential to emerge as a pivotal tool in the fight against microbial infections while offering innovative pathways for therapeutic advancements.

Advancements in optical biosensing techniques: From fundamentals to future prospects

Optical biosensors that consist of a light source, optical elements, and a photodetector are used to detect chemical and biological species and pollutants. This Tutorial discusses the fundamental details of optical biosensing techniques that include materials, working principle, components, sensor configurations, parameters, and future prospects. Optical biosensing techniques include plasmonic [surface plasmon resonance (SPR) and localized SPR], fluorescence, luminescence, Raman scattering, colorimetric, and interferometric methods. Bioreceptor elements play a significant role in detecting the specific analyte that can be synthetic or natural. Surface functionalization techniques to bind the bioreceptor elements on the surface, to control the bioreceptor orientation, have been discussed in detail. The possibility of integration of techniques on a chip, to develop wearable, implantable sensors, and the associated challenges have been fully demonstrated. This Tutorial provides valuable insights into the present state and future directions of optical biosensors for various applications.

Construction of rGO-MXene@FeNi/epoxy composites with regular honeycomb structures for high-efficiency electromagnetic interference shielding

With the rapid development of 5G communication technology and wearable electronic devices, the demand for low-reflection electromagnetic interference (EMI) shielding materials is becoming increasingly urgent. In this work, reduced graphene oxide-MXene (rGMH) @FeNi/epoxy EMI shielding composites with a regular honeycomb structure were successfully prepared by the combination of surface functionalization modification, sacrificial template, and freeze-drying. The effects of magnetic FeNi alloy particle loading mode and loading amount on the EMI shielding performance of composites were investigated. The results show that rGMH@FeNi/epoxy EMI shielding composites have the highest EMI shielding effectiveness (EMI SE) and the lowest reflection shielding effectiveness when magnetic FeNi alloy particles are loaded only on the graphene skeleton. In this composite, the EMI SE value of the composite is 61 dB when the rGMH@FeNi mass fraction is 5.4 wt% (f-FeNi mass fraction is 0.9 wt%), which is 4.7 times that of the blended rGO/MXene/FeNi/ epoxy resin composite (13 dB) with the same mass fraction. At the same time, the rGMH@FeNi/epoxy composite has excellent thermal stability (heat-resistance index of 190.3 °C) and mechanical properties (energy storage modulus of 8606.7 MPa). These polymer-based EMI shielding composites with excellent EMI shielding properties and low reflection effectiveness have great potential in the protection of high-power, portable and wearable electronic devices against electromagnetic pollution.

Impact of aminopropyl units on physisorption in mesostructured silica is larger for CH4 than CO2 and depends on pore curvature

Mesoporous silica-based materials attract great interest for diverse applications, including capture, storage, and catalysis due to their large surface area, uniform pore size distribution, and customizable surface. The regular 2D hexagonal pore symmetry of MCM-41 makes it an ideal model. Amine groups are introduced to enhance CO2 adsorption, but the interplay of factors influencing overall performance, including pore size, remains unclear. This computational study explores the physisorption of CO2 and CH4, shedding light on the microscopic details underlying adsorption capacity and selectivity. Three aminopropyl-functionalized MCM-41 models with different pore size are compared through Grand Canonical Monte Carlo and Molecular Dynamics simulations. Aminopropyl chains affect CO2 adsorption, but its affinity for the preserved silanol groups is larger. In addition, the competitive interaction between amine and silanol groups emerged, and it is pore curvature dependent. Surprisingly, CH4 physisorption is influenced even more by surface functionalization. Results show a non-monotonic trend as a function of pore size. Local density of the alkyl chains plays the major role. Overall, the intermediate pore size demonstrates the best performance, thanks to the balance among the various effects. The study emphasizes the importance of understanding the interplay between material texture and gas interactions to optimize adsorption performance.

Confined PMo6W6 for energy storage

Mixed-addenda polyoxometalate (e.g., PMoxW12-x) by “orbital engineering” allows the functionalization of the single-addenda cluster surface, which offers new electronic properties. However, the well-known agglomeration phenomenon greatly limits the full understanding of its unique redox properties. It makes sense to fully stimulate the intrinsic multi-electron activity of mixed-addenda polyoxometalate by confining engineering to apply in energy technology. With the verification of potential candidate PMo6W6 possessing remarkable stability with fully exposed activity sites in a confined state by theoretical analysis, we achieve the precise confinement of the single PMo6W6 molecule in porous carbon (PC) with a matched pore aperture (PMo6W6@PC). As a result, PMo6W6@PC-based supercapacitor shows high energy densities of 0.308 mWh cm−2 at power densities of 43.2 mW cm−2, outperforming most polyoxometalate-based supercapacitors. Moreover, the device exhibits a capacity retention of over 80.4 % at 8 mA cm−2 after 8000 cycles. This improved electrochemical redox activity may be ascribed to the strong orbital electronic coupling between W and Mo atoms of PMo6W6 by confinement engineering. This work proves that the confined PMo6W6 can maximize the advantages of PMo12O40 and PW12O40, which provides a theoretical basis for other mixed-addenda polyoxometalate species.

Carbon dots in biomedicine: From synthesis to application

Many studies have examined the properties and possible uses of carbon dots (CDs), a novel class of zero-dimensional carbon nanomaterials. Many notable features are present in them, such as robust colloidal stability, easy surface functionalization and bioconjugation, robust biocompatibility in vivo and in vitro settings, resistance to photobleaching, an environmentally benign synthesis process, and a comparatively low production cost. These characteristics make carbon dots an attractive option for a variety of possible biomedical uses. This work provides a thorough review of the most recent developments in the biomedical sciences, covering the physicochemical characteristics, synthesis techniques, and uses of carbon dots in biosensing, bioimaging, and disease treatment. It is based on a thorough examination of the relevant literature and experimental results. According to the study findings that are now accessible, carbon dots have a lot of potential applications in the biomedical industry. These properties make carbon dots suitable for use in bioimaging, biosensing, and disease treatment. Nevertheless, there are still some challenging issues that require further investigation and analysis. It is anticipated that further research and exploration will result in carbon dots making a significant contribution to human health in the future, and that the ongoing innovation and development of carbon dot technology will result in a significant transformation of the biomedical field.