Construction of rGO-MXene@FeNi/epoxy composites with regular honeycomb structures for high-efficiency electromagnetic interference shielding

Abstract

With the rapid development of 5G communication technology and wearable electronic devices, the demand for low-reflection electromagnetic interference (EMI) shielding materials is becoming increasingly urgent. In this work, reduced graphene oxide-MXene (rGMH) @FeNi/epoxy EMI shielding composites with a regular honeycomb structure were successfully prepared by the combination of surface functionalization modification, sacrificial template, and freeze-drying. The effects of magnetic FeNi alloy particle loading mode and loading amount on the EMI shielding performance of composites were investigated. The results show that rGMH@FeNi/epoxy EMI shielding composites have the highest EMI shielding effectiveness (EMI SE) and the lowest reflection shielding effectiveness when magnetic FeNi alloy particles are loaded only on the graphene skeleton. In this composite, the EMI SE value of the composite is 61 dB when the rGMH@FeNi mass fraction is 5.4 wt% (f-FeNi mass fraction is 0.9 wt%), which is 4.7 times that of the blended rGO/MXene/FeNi/ epoxy resin composite (13 dB) with the same mass fraction. At the same time, the rGMH@FeNi/epoxy composite has excellent thermal stability (heat-resistance index of 190.3 °C) and mechanical properties (energy storage modulus of 8606.7 MPa). These polymer-based EMI shielding composites with excellent EMI shielding properties and low reflection effectiveness have great potential in the protection of high-power, portable and wearable electronic devices against electromagnetic pollution.