Full Adder Research Articles

Review of Carbon Nanotube Field Effect Transistor for Nanoscale Regime

Background: The need for high performance, small size, low delay, low power consumption, and long battery backup of portable systems is increasing with the advancement of technology. Many features of portable systems can be improved using scaling methods. In the scaling process, reducing the size of devices causes serious difficulties, including the short channel effect (SCE) and leakage current, which degenerates the characteristics of the systems. Objective: In this review paper, a trending carbon nanotube field effect transistor (CNTFET) technology is discussed in detail. CNTFET can replace the conventional metal oxide semiconductor field effect transistor (MOSFET) technology to overcome the SCE problems in the nanoscale regime and also meet the requirements of portable systems. Methods: The CNTFET is an extremely good nanoscale technology due to its one-dimension band structure, high transconductance, high electron mobility, superior control over channel formation, and better threshold voltage. This technology is used to construct high-performance and low-power circuits by replacing the MOSFET technology. CNTFET in comparison to MOSFET takes the carbon nanotube (CNT) as a channel region. Results: The value of threshold voltage in CNTFET changes with the diameter of CNT. The threshold voltage of the devices controls many parameters at the circuit-level design. Hence, the detailed operation and the characteristics of CNTFET devices are presented in this review paper. The existing CNTFET-based ternary full adder (TFA) circuits are also described in this review paper for the performance evaluation of different parameters. Conclusion: CNTFET technology is the possible solution for the SCE in the nanoscale regime and is capable to design efficient logic circuits. The circuits using the CNTFET technology can provide better performance and various advantages, including fast speed, small area, and low power consumption, in comparison to the MOSFET circuits. Thus, CNTFET technology is the best choice for circuit designs at the nanoscale.

A New Approach to Design of Cost-Efficient Reversible Quantum Dual-Full Adder and Subtractor

This paper proposed the design and development of reversible cost-efficient innovative quantum dual-full adder and subtractor or QD-FAS circuit using quantum gate. The proposed circuit can be used as full adder and full subtractor simultaneously, which is designed using double Peres gate or DPG and Feynman gate or FG. The quantum cost, garbage output and constant input of the QD-FAS is 8, 1 and 1. Which is better w.r.t previously reported work. The QD-FAS circuit, as proposed, includes shared sum and difference terminals, as well as a carry-out and a borrow output terminal. Notably, this innovation showcases a remarkable 27.27% reduction in quantum cost. The improvement in garbage output is even more striking, showing a 50% enhancement. When assessing the overall advancement in quantum cost, it falls within the range of 27.27% to 66.66%. To confirm the viability of this design, extensive testing is carried out using the IBM Qiskit simulator. This design holds significant importance in a variety of applications, including quantum computing, cryptography, and the realm of reversible Arithmetic Logic Units (ALU).

Impact of Variability on Novel Transistor Configurations in Adder Circuits at 7nm FinFET Technology

This research work focuses on implementation of the FinFET-based complementary metal-oxide-semiconductor (CMOS) Full Adder circuits for different transistor configurations using ASAP7 FinFET model. First, this work examines FinFET-based AND-OR-invert (AOI) gates using different topologies, and second, a FinFET-based CMOS Full Adder circuit at the 7[Formula: see text]nm technology node is analyzed with respect to its process, voltage and temperature (PVT) variability effect measured in terms of the normalized standard deviation of different performance metrics. The comparison is made between conventional (CFFA1) and proposed (FFA2, FFA3, FFA4, FFA5, FFA6, FFA7 and FFA8) FinFET-based CMOS full adder circuits. The aim is to determine the optimal design configuration of the FinFET full adder circuit with the minimum impact of PVT variability. On examining the power delay product (PDP) variability, it is found that variations in FFA2, FFA3, FFA4, FFA5, FFA6, FFA7 and FFA8 are significantly lower than CFFA1 by 6.30%, 4.68%, 10.30%, 65.48%, 68.05%, 65.61% and 17.20%, respectively. Among all the proposed configurations, normalized standard deviation [Formula: see text] for the PDP metric is lowest in FFA6, followed by FFA7, FFA5, FFA8, FFA4, FFA2 and FFA3. The normalized standard deviation [Formula: see text] for power dissipation, however, is lowest in FFA8. In addition, a layout comparison analysis of conventional and proposed full adder circuits reveals that FFA7 has the least area, followed by FFA8, FFA6, FFA5, FFA3, FFA4, FFA2 and CFFA1. The area of FFA2, FFA3, FFA4, FFA5 and FFA6 has decreased by 3.29%, 3.51%, 3.50%, 5.14% and 5.52%, while FFA7 and FFA8 have experienced a decrease in area by 13.87% and 14.36%, respectively, as compared to conventional CFFA1. The proposed layout of FinFET-based CMOS Full Adders can be directly transferred into the foundry’s production line for manufacturing purposes. The overall investigation led us to conclude that FFA8 is the most efficient of all due to the lowest power variation, lower delay variation and lower PDP variation, moreover it has a reduced layout area among all the discussed designs. However, there is a tradeoff in terms of penalty in nominal power, propagation delay and PDP in the proposed topologies.

Full Adder Circuit Design with CMOS Technology Implementing with Artificial Neural Network with Verilog HDL Code for Output

The goal of this research is to create Full-Adder gate using a Complementary Metal Oxide Semiconductor (CMOS) and an Artificial Neural Network.We constantly bear in mind that any COMS circuit we design should be as inexpensive as possible.Multilayer ANN was employed in this work to create the circuit. Weights are employed to modify the value in our study, treating neurons as transistors and treating negative values as inverters.We are also designing Verilog-HdL Code to simply apply the full adder for experimenting an artificial neural network assigning weights to get appropriate results. Keywords: Full Adder, CMOS,ANN,Verilog-HDL

CMOS full adder cells based on modified full swing restored complementary pass transistor logic for energy efficient high speed arithmetic applications

In modern Digital System design, adders are widely used in many applications including Microprocessors, Digital Signal Processors, Arithmetic Logic Units and digital signal processing. Power efficiency is an important key factor for any integrated circuits. By considering the importance of Full Adder (FA) cells, their power consumption may play significant role in overall power consumption. So designing a low-power full adder is important to achieve the high-performance computing. Swing restored technique is commonly used method to reduce the signal swing at the internal nodes and it helps to reduce the power consumption and improves the circuit's speed. This paper presents a novel hybrid full adder cell design using the modified swing restored technique and complementary pass transistor logic. The Full Adder circuit was implemented using Cadence Virtuoso tool on gptk 180nm CMOS process technology. The proposed full adder was compared with earlier reported circuits based on Delay, Power and PDP. The comparison shows that proposed circuit consumes less power with high performance. Also various process corners and noise immunity were analyzed to find the sensitivity of the circuit. Further an 8-bit Ripple Carry Adder was designed using the proposed full adder to verify the functionality in higher order bits. Simulations were performed and analysed using the Cadence Spectre.

A New Approximate Sum of Absolute Differences Unit for Bioimages Processing

An inexact 6-transistor full adder (FA) cell is presented. It is low-power and gives full-swing outputs because of the applied gate diffusion input (GDI) along with the dynamic threshold (DT) techniques. The FA which has three errors is used in a 10-transistor inexact 4:2 compressor based on the stacking circuit idea. The implementation by a 16 nm carbon nanotube field-effect transistor (CNTFET) technology shows a small area of 0.027 lm2 and 0.045 lm2 for the FA and compressor, respectively. A new approximate sum of absolute differences (SAD) block is presented by the FA and compressor. The average power, power-delay-product (PDP), and peak signalto-noise ratio (PSNR) of the SAD are 6.80 mW, 33.86 nJ, and 42.98 dB, respectively, which confirm its efficiency for bioimages difference detection.

Role of tuning techniques in advancing the performance of negative capacitance field effecting based full adder

<p>The increasing demand for faster, robust, and efficient device development of enabling technology to mass production of industrial research in circuit design deals with challenges like size, efficiency, power, and scalability. This paper, presents a design and analysis of low power high speed full adder using negative capacitance field effecting transistors. A comprehensive study is performed with adiabatic logic and reversable logic. The performance of full adder is studied with metal oxide field effect transistor (MOSFET) and negative capacitance field effecting (NCFET). The NCFET based full adder offers a low power and high speed compared with conventional MOSFET. The complete design and analysis are performed using cadence virtuoso. The adiabatic logic offering low delay of 0.023 ns and reversable logic is offering low power of 7.19 mw.</p>

One-bit Full Adder with Low Delay and Low Cell Count in the Emerging Technology of Quantum-Dot Cellular Automata

One-bit Full Adder with Low Delay and Low Cell Count in the Emerging Technology of Quantum-Dot Cellular Automata

Design and Implementation of CMOS and Transmission Gate Based Full Adder Using 45nm Technology

Abstract: In electronic industry the level of integration is an important aspect as it makes the electronic device simpler and more reliable. The device density increases with the better level of integration. Power dissipation, Area occupied, and Propagation delay are some of the important factors that need to be considered. These parameters play a vital role in manufacturing portable electronic gadgets. Many binary adders are formed using full adders. Hence, if any enhancements have to be made to improve the performance, it can be made at the root level i.e., adders circuits itself. This in turn helps in bettering the performance of the electronics circuits which follow adder circuits. The low power VLSI design is of great importance due to portable electronic products. Full adder is a type of adder circuit that adds three inputs and gives two outputs. Out of three, two will be the present inputs and the third input will be the carry from the previous stage. ‘A’ and ‘B’ are the actual inputs, ‘C’ is the carry from the previous operation. SUM and CARRY OUT are the two outputs. In this work, Design and Implementation of full adder using conventional CMOS design and Transmission gate based Full adder circuits are carried out. At last comparison is made between the two designs with respect to power dissipation, delay and area (number of transistors). Cadence Virtuoso Tool is used in design and simulation conventional CMOS design and Transmission gate based Full adder circuits. The entire circuit is simulated in Cadence Tools at 45nm CMOS process.

Implementation and Analysis of CMOS and Pass Transistor Logic Based Full Adder Circuits

Abstract: In electronic industry the level of integration is an important aspect as it makes the electronic device simpler and more reliable. The device density increases with the better level of integration. Power dissipation, Area occupied and Propagation delay are some of the important factors that need to be considered. These parameters play a vital role in manufacturing portable electronic gadgets. Many binary adders are formed using full adders. Hence, if any enhancements have to be made to improve the performance, it can be made at the root level i.e., adders circuits itself. This in turn helps in bettering the performance of the electronics circuits which follow adder circuits. The low power VLSI design is of great importance due to portable electronic products. Full adder is a type of adder circuit that adds three inputs and gives two outputs. Out of three, two will be the present inputs and the third input will be the carry from the previous stage. ‘A’ and ‘B’ are the actual inputs, ‘C’ is the carry from the previous operation. SUM and CARRY OUT are the two outputs. In this work, Design and Implementation of full adder using conventional CMOS design and Pass Transistor Logic based Full adder circuits are carried out. At last comparison is made between the two designs with respect to power dissipation, delay and area (number of transistors). Cadence Virtuoso Tool is used in design and simulation conventional CMOS design and Pass Transistor Logic based Full adder circuits. The entire work is simulated in 180nm CMOS technology.

Implementation of 64-Bit RISC Processor Using Vedic Multiplier

Abstract: In this project, 64 bit RISC processor designed with Vedic multiplier design. Reduced Instruction Set Computer (RISC) is a design which presents better performances, higher speed of operation and favors the smaller and simpler set of instructions. In addition to multiplier which is implemented using vedic mathematics we are also proposing an adder which is mux- based full adders for building higher bit adders in an area and speed efficient which is implemented in addition as well as for compression in vedic mathematic to obtain the output. A 64 bit RISC processor designed in this paper is capable of executing more number of instructions with simple design, using the Verilog Hardware Description Language (HDL) and the design is simulated in the Xilinx Vivado 2018.3. The main achievement in this work is that the multiplier unit in Arithmetic and Logic Unit (ALU) and Multiplier and Accumulator (MAC) is implemented using Vedic Sutras. The main principle used in Vedic mathematics is to reduce the typical calculation of conventional mathematics to very simple one and hence reduce the overall computational complexity. Vedic Multiplier design is based on “Urdhva Triyakbhyam” which is among the 16 Vedic Sutras and MUX-Based Full Adders The proposed RISC processor is very simple and capable of executing 14 instructions. The achievement in this work is that savings in power in case of MAC and ALU is achieved compared to conventional ALU and MAC respectively. Also the delay is reduced in MAC and ALU in comparison with conventional ALU and MAC correspondingly. These Vedic MAC and ALU are then integrated with other blocks in processor and 64-bit Vedic processor is developed. This reduces the delay and saves area compared to conventional processor. Hence the improvement in speed of operation, and less area utilization are the key features of designed RISC processor.

A new ripple carry adder structure based on a swing‐boosted full adder for concurrent error correction in low‐resolution pipeline analog‐to‐digital converters

SummaryA ripple carry adder (RCA) structure is presented which can concurrently correct a gain error in low‐resolution pipeline analog‐to‐digital converters (ADCs). The RCA is composed of a new swing‐boosted full adder (FA) based on the transmission gate (TG) technique. So, it is low‐power, high‐speed, and full‐swing with high driving capability. In 90 nm technology, the results of power, delay, and power‐delay‐product (PDP) of the FA are 1.5296 μW, 2.1141 ns, and 3.2337 fJ, respectively. The RCA with an area of 408.09 μm2 is evaluated by a 3‐bit pipeline ADC with 1.5‐bit per stage. When the erroneous codes are passed through the RCA, the maximum and minimum integral nonlinearity (INL) are improved by 19.83% and 90.98%, while the maximum and minimum of the differential nonlinearity (DNL) are improved by 50%, and 42.06%, respectively.

A design of multiplier based on Radix_4 Booth algorithm and 4-2 Wallace compression tree

In a multitude of computational and signal processing scenarios, the multiplier functions as a fundamental arithmetic component. Given the complex hardware arrangement of multipliers and their usual positioning within the crucial pathway of digital systems, their significance is substantial. Therefore, approximations of multipliers can greatly optimize system performance. This essay examines the fundamental ideas behind the Wallace tree, the Carry ahead adder, and the Radix-4 Booth algorithm. Additionally, instead of the more common 3-2 compressors, a Wallace tree structure with 4-2 compressors is used to compact these products for the manufacture of partial products. This reduction in compression stages to three significantly curtails delays along critical paths, thereby substantially improving overall performance. The compressed outcomes from the Wallace tree undergo processing via a 64 bit carry ahead adder, effectively addressing delays stemming from mutual carry propagation among sequentially connected regular full adders. Leveraging these principles and processes, a 32-bit signed multiplier is designed. Building upon this foundation, an approximate Booth multiplier is developed, enhancing both computational speed and reducing critical path delays. The functionality of the multiplier was validated using Vivado simulation, demonstrating its correctness. Additionally, the RTL-level circuitry of different segments of the multiplier was showcased.

A new nano-design of configurable logic module based on coplanar reversible adder and modified Fredkin gates using quantum technology

Quantum Dot Cellular Automata (QCA) and reversible logic have emerged as promising alternatives to conventional CMOS technology, offering several advantages, such as ultra-dense structures and ultra-low-power consumption. Among the crucial components of processors, the Arithmetic Logic Unit (ALU) has witnessed significant advancements in reversible computing, leading to energy-efficient and high-speed computing systems, particularly beneficial for Digital Signal Processing (DSP) applications. Conventional ALUs, reliant on irreversible logic, encounter energy inefficiencies due to information loss during computations, resulting in increased power consumption. Moreover, they may face limitations in processing speed, impacting real-time processing capabilities, especially for complex DSP tasks involving intensive arithmetic and logic operations. In response to these challenges, a research paper presents a pioneering approach, proposing a novel reversible ALU design using QCA nanotechnology. The proposed design ingeniously incorporates Modified Fredkin (MF) gates, and a coplanar reversible full adder based on the HNG gate, skillfully leveraging the unique features of QCA nanotechnology to optimize the ALU's energy-efficient and high-speed performance for DSP applications. This revolutionary QCA reversible ALU comprises 330 QCA cells arranged in a compact 0.41 μm2 area, skillfully realized through the coplanar clock-zone-based crossover approach. Its core computational elements, the three MF gates, and the innovative coplanar reversible full adder empower the ALU to execute a remarkable array of 20 distinct arithmetic and logic operations, showcasing its versatility in handling diverse DSP tasks. The proposed structure undergoes extensive simulations utilizing QCADesigner version 2.0.3 to confirm its performance. The evaluation results manifest substantial improvements compared to previous designs, boasting a 30% reduction in area occupancy, a 20% decrement in cell count, a 10% reduction in latency, and a 10% decrease in quantum cost compared to the best-known previous structure. These compelling outcomes solidify the potential of the proposed reversible ALU as a transformative advancement in energy-efficient and high-speed computing for DSP applications.

A novel lightweight CNN-based error-reduced carry prediction approximate full adder design for multimedia applications

A novel lightweight CNN-based error-reduced carry prediction approximate full adder design for multimedia applications

Logic Gate Circuits Based on CeOx/WOy Memristor for the Odd/Even Checker and Encryption/Decryption of Image Applications

AbstractDue to its powerful brain‐like parallel computing and efficient data processing capabilities, memristors are considered to be the core components for building the next generation of artificial intelligence systems. In this study, the CeOx/WOy heterojunction is employed as the functional layer, and various metal materials are utilized as the top electrode to fabricate the memristor. The results indicate that the memristive performance of the Ag/CeOx/WOy/ITO device can be improved by using Ag as the top electrode. By studying the conductivity mechanism of the device, a conductivity model is established that regulates oxygen vacancies and Ag conductive filaments. Furthermore, using the as‐prepared memristor, it is constructed four basic digital logic circuits: OR, AND, XOR, and XNOR, as well as a half adder and a full adder that can be used for digital arithmetic operations. Specifically, an odd/even checker is developed based on XOR and XNOR logic circuits to verify the correctness of data transmission. Finally, it is also designed and implemented a cryptographic array based on a memristor, which can be applied to encrypt and decrypt a series of numbers and images. Therefore, this work extends the application of memristor toward digital circuits, information transmission, data processing and image security encryption.

Design and Assessment of Hybrid MTJ/CMOS Circuits for In-Memory-Computation

Hybrid magnetic tunnel junction/complementary metal oxide semiconductor (MTJ/CMOS) circuits based on in-memory-computation (IMC) architecture is considered as the next-generation candidate for the digital integrated circuits. However, the energy consumption during the MTJ write process is a matter of concern in these hybrid circuits. In this regard, we have developed a novel write circuit for the contemporary three-terminal perpendicular-MTJs that works on the voltage-gated spin orbit torque (VG+SOT) switching mechanism to store the information in hybrid circuits for IMC architecture. Investigation of the novel write circuit reveals a remarkable reduction in the total energy consumption (and energy delay product) of 92.59% (95.81) and 92.28% (42.03%) than the conventional spin transfer torque (STT) and spin-Hall effect assisted STT (SHE+STT) write circuits, respectively. Further, we have developed all the hybrid logic gates followed by nonvolatile full adders (NV-FAs) using VG+SOT, STT, and SHE+STT MTJs. Simulation results show that with the VG+SOT NOR-OR, NAND-AND, XNOR-XOR, and NV-FA circuits, the reduction in the total power dissipation is 5.35% (4.27%), 5.62% (3.2%), 3.51% (2.02%), and 4.46% (2.93%) compared to STT (SHE+STT) MTJs respectively.

Specific Design on Arithmetic Circuits with Low Power for VLSI Architectures

The low power analog and digital systems are the major for any robotic applications. Designing low power and high-speed digital systems is one of the major and essential needs in VLSI Systems. Adder is the main key block in the digital systems. The entire digital systems performance is based on this adder block, which decides the overall power consumption and speed of the circuit. Various early designed full adder cell circuits encountered with low speed and high-power consumption issues. Here novel 1-bit full adder is designed based on XOR and XNOR Cell structure which operates in full swing and also the no critical path. With the use of three proposed the sum and carry is obtained. The main objective of this proposed full adder is to bring minimum power consumption and delay. The novel proposed full adder provides less power consumption by 94.68%, 90.82%, 84.54%, 35.61% and 83.43% while comparing with other full compared adders. The simulations were obtained in DSCH and Microwind tool

Notice of Violation of IEEE Publication Principles: Design of Cost Efficient Modular Digital QCA Circuits using Optimized XOR Gate

Notice of Violation of IEEE Publication Principles “Design of Cost Efficient Modular Digital QCA Circuits using Optimized XOR Gate” by Suhaib Ahmed and Syed Farah Naz in IEEE Transactions on Circuits and Systems II: Express Briefs After careful and considered review of the content and authorship of this paper by a duly constituted expert committee, this paper has been found to be in violation of IEEE’s Publication Principles. This paper contains significant portions of original text from the paper cited below. The original text was copied without attribution (including appropriate references to the original author(s) and/or paper title) and without permission. “Design and Analysis of a Novel Low-Power Exclusive-OR Gate Based on Quantum-Dot Cellular Automata” By Haotian Chen, Hongjun Lv, Zhang Zhang, Xin Cheng and Guangjun Xie in Journal of Circuits, Systems, and Computers, Vol. 28, No. 8, 2017 The advantages such as high operating frequency (in the range of few THz), low power dissipation, small size and high density in the nano regime has led to the application of Quantum dot Cellular Automata (QCA) in designing various digital circuits. In this brief, an ultra-efficient two input XOR gate design in QCA is proposed. It is a single layer design consisting of only 9 cells with no crossover and operating on cell to cell interaction. The functionality of the proposed gate has been verified at both physical and simulation level. In addition to this, fault tolerance to single cell missing defect, single cell addition defect and single cell displacement defect of the proposed XOR gate has also been presented. Based on the performance evaluation, it is seen that the proposed XOR gate has least cell count, least area and least latency which in turn leads to least circuit cost. Also, the proposed design dissipates least energy. The applicability of proposed XOR gate has also been investigated by designing various cost efficient digital circuits such as full adder, parity checker, etc.

Design and FPGA Realization of Energy Efficient Reversible Full Adder for Digital Computing Applications

Design and FPGA Realization of Energy Efficient Reversible Full Adder for Digital Computing Applications