FTIR Spectroscopy Research Articles

Anti-tumor and anti-metastasis of water-soluble sulfated β-glucan derivatives from Saccharomyces cerevisiae

Traditional fungi β-glucan commonly possesses high molecular weight with poor water solubility, which remains significant challenge in the drug development and medical application. Water-soluble β-glucan with high molecular weight (dHSCG) of 560 kDa, low molecular weight (dLSCG) of 60 kDa, and sulfated derivative (SCGS) with a molecular weight of 146 kDa and sulfate degree at 2.04 were obtained through well-controlled degradation and sulfated modification from Saccharomyces cerevisiae in this study. The structural characteristics were confirmed as β-1,3/6-glucan by FT-IR and NMR spectroscopy. Carbohydrate microarrays and surface plasmon resonance revealed distinct and contrasting binding affinities between the natural β-glucans and sulfated derivatives. SCGS exhibited strong binding to FGF and VEGF, while natural β-glucan showed no response, suggesting its potential as a novel antitumor agent. Moreover, SCGS significantly inhibited the migration rate of the highly metastatic melanoma (B16F10) cells. The lung metastasis mouse model also demonstrated that SCGS significantly reduced and eliminated the nodules, achieving an inhibition rate of 86.7% in vivo, with a dramatic improvement in IFN-α, TNF-α, and IL-1β levels. Through analysis of protein content and distribution in lung tissues, the anti-tumor and anti-metastasis mechanism of SCGS involves the regulation of degrading enzymes to protect extracellular matrix (ECM), as well as the reduction of angiogenic factor release. These findings provide a foundation for exploring the potential of SCGS in the development of new anti-tumor and anti-metastasis drugs and open up a new field in cancer research.

An eco-friendly wheat straw adsorbent functionalized with mercaptopropionyl for the removal of Cu(II) from aqueous solution

A novel absorbent called mercaptopropionyl wheat straw (MPWS) was prepared through alkali pretreatment and mercaptopropionyl modification for efficient removal of Cu(II) from aqueous solutions. Single factor experiments were conducted to investigate various parameters affecting the adsorption of Cu(II) with MPWS. Adsorption experiments including kinetics, isotherms, thermodynamics, as well as various characterization methods were employed to discuss the mechanism of Cu(II) uptake by MPWS in this study. The results showed that MPWS exhibited high removal capacity for Cu(II), achieving a maximum removal efficiency of 97.28 % under optimal conditions: oscillation rate at 150 rpm, temperature at 303 K, duration at 2 h, pH value at 6.0, and initial concentration of Cu(II) at 100 mg/L. The fitting results indicated that pseudo-second-order kinetic model better described the experimental data while Freundlich model provided a better fit for isothermal data. Thermodynamic calculations confirmed that the adsorptive process was spontaneous and endothermic. Characterization techniques such as FTIR spectroscopy SEM imaging, and EDS analysis confirmed chemisorption between Cu(II) ions and functional groups present on MPWS including sulfhydryl groups, amine groups, hydroxyl groups, and carboxyl groups. Overall, the main mechanisms governing Cu(II) uptake onto MPWS included coordination, ion exchange, electrostatic adsorption, and physical adsorption.

1,2,4-triazine derived binuclear lead(ii) complexes: synthesis, spectroscopic and structural investigations and application in organic light-emitting diodes (OLEDs).

Two novel binuclear complexes of Pb(ii) were synthesized by reacting a 3-(2-pyridyl)-5-(4-methoxyphenyl)-1,2,4-triazine (PMPT) ligand with different anionic co-ligands (1: bromide, 2: acetate and isothiocyanate) in a 1 : 1 molar ratio of PMPT ligands to lead(ii) salts. The complexes, [Pb2(μ-PMPT)2Br4] (1) and [Pb2(μ-PMPT)2((μ-CH3COO)2(NCS)2] (2), were characterized using various physicochemical techniques such as CHN analysis, FT-IR spectroscopy, and 1H NMR spectroscopy. Additionally, their structures were determined using single-crystal X-ray diffraction. Based on the obtained structural parameters, complex 1 exhibited a PbN3Br2 environment, while complex 2 displayed a PbN4O3 environment, with holodirected and hemidirected coordination spheres, respectively. Within the crystal network of the complexes, there were interactions involving C-H⋯X (X: O, S, N) as well as π-π stacking. The Pb(ii) complexes were further investigated for their potential use as the emitting layer in organic light-emitting devices (OLEDs). The current-voltage and luminescence-voltage characteristics, as well as the electroluminescence (EL) properties of the complexes, were studied.

Anticoagulation activity of sulfated carboxymethyl cellulose/Azadirachta indica leaf powder-based bio-composite.

Polymeric bio-composites synthesized via a green approach using natural herbs have fascinating anticoagulant activity due to their eco-friendly and non-toxic behavior towards various physical and chemical actions. Herein, we introduce a simple and eco-friendly approach for the fabrication of a new hybrid type of bio-composite based on sulfated carboxymethyl cellulose (S-CMC) and Azadirachta indica leaf powder (S-CMC/NLP). First, a non-toxic sulfating agent called N(SO3Na)3 was used to modify carboxymethyl cellulose into S-CMC. With an ion exchange capacity of 0.25 meq. g-1, the level of sulfation (%) of S-CMC (modified polysaccharide) was measured to be 12.01%. Three types of S-CMC/NLP bio-composites were developed by varying the concentration of NLP. FE-SEM, EDX, and XRD were used to characterize the structural features of S-CMC/NLP bio-composites. FTIR spectroscopy indicated that the S-CMC/NLP bio-composite possesses COO-, -OH and SO3- groups, suggesting the structural similarity to heparin. In addition, the anticoagulant effect of the S-CMC/NLP bio-composite was investigated using PT and APTT assays. The APTT investigation confirmed that following the intrinsic pathway of the coagulation system, 2-NLP/S-CMC bio-composite dose-dependently (0.045-0.28 mg mL-1) prolonged the time of blood coagulation compared to control (pure plasma). The S-CMC/NLP bio-composite showed its potential as a new, safe, and effective candidate for anticoagulant activity.

Bryophyllum Pinnatum leaf extract mediated MoS2/ZnO nanocomposite for robust photocatalysis applications

One of the primary problems of the twenty-first century is the removal or degradation of organic dyes and antibiotics from water systems since they both contribute significantly to water pollution. To address this issue, molybdenum disulfide and zinc oxide nanocomposite (MoS2/ZnO) were produced by simple, eco-friendly and low cost process using Bryophyllum pinnatum (leaf) phytoextract (BPP) as a reducing as well as capping agent. The prepared BPP-mediated MoS2/ZnO nanocomposite (BP-MoS2/ZnO NC) samples were characterized through various techniques including powder XRD, Rietveld refinement, UV–Vis spectroscopy, FESEM, DLS and FT-IR spectroscopy. The BP-MoS2/ZnO samples were further tested for their use in the sunlight-powered photocatalytic breakdown of methylene blue (MB) and their efficiency to break MB molecules was contrasted with the BPP-mediated ZnO (BP-ZnO), Chemical ZnO (Ch-ZnO) and pure MoS2. The photocatalytic investigation reveals a remarkable enhancement in the photocatalytic activity of pristine ZnO when sensitized with MoS2. These results underscore the synergistic effect achieved by combining ZnO and MoS2. Notably, we found that the optimal catalytic performance is achieved at a Mo atomic percentage of 2 % relative to Zn, emphasizing the importance of precise control for maximizing efficacy. Under sun exposure, 0.5 g/L of BP-MoS2/ZnO resulted in 89.35 % photodegradation of a 20 mg/L MB solution with a rate constant of 0.07537 min-1, which was around 10.42 %, 28.51 %, and 51.86 % greater than BP-ZnO, Ch-ZnO, and pure MoS2, respectively. Further, the efficacy of the BP-MoS2/ZnO NC as solar-driven photocatalysts for removal of pharmaceutical drugs (Amoxicillin & Metronidazole) and textile dyes (Methyl orange) pollutants in sunlight was also investigated. These results show that Bryophyllum extract-mediated MoS2/ZnO is a promising material for solar-based photocatalytic applications.

Enrofloxacin Pharmaceutical Formulations through the Polymer-Free Electrospinning of β-Cyclodextrin-oligolactide Derivatives.

Enrofloxacin (ENR), a member of the fluoroquinolone class of antibiotics, is widely used in veterinary medicine to treat bacterial infections. Like many antibiotics, ENR has limited water solubility and low bioavailability. To address these challenges, drug formulations using solid dispersions, nanosuspensions, surfactants, cocrystal/salt formation, and inclusion complexes with cyclodextrins may be employed. The approach described herein proposes the development of ENR formulations by co-electrospinning ENR with custom-prepared cyclodextrin-oligolactide (CDLA) derivatives. This method benefits from the high solubility of these derivatives, enabling polymer-free electrospinning. The electrospinning parameters were optimized to incorporate significant amounts of ENR into the CDLA nanofibrous webs, reaching up to 15.6% by weight. The obtained formulations were characterized by FTIR and NMR spectroscopy methods and evaluated for their antibacterial activity against Staphylococcus aureus, Escherichia coli, and Pseudomonas aeruginosa. This study indicates that the presence of CDLA derivative does not inhibit the antibacterial activity of ENR, recommending these formulations for further development.

Sol-gel derived ternary CrxCuCx-1 compounds: Characterization, structural insights and biological properties

This research explores a novel method for synthesizing Cr-Cu-C ternary carbide using a sol-gel technique. The study targeted to produce a wide range of transition metal carbides within the Cr-Cu-C system by varying the elemental ratios. The primary goal was to observe how compositional changes affect the morphological, structural, and chemical properties of the resulting ternary compounds resembling the MAX phase. Another focus is to establish a practical synthesis route and evaluating the materials' suitability for different applications. The synthesis process involved combining metal nitrates and citric acid, followed by carbothermal reduction. Comprehensive characterization techniques, including FTIR, XRD, SEM, EDX, XPS, and Raman spectroscopy, were employed to thoroughly recognize the prepared materials. In XRD, the calculated lattice parameters indicated hexagonal structures for all the prepared ratios, confirming successful synthesis and providing insights into their morphological and chemical properties. This has also been supported with other characterization techniques, Additionally, the Cr-Cu-C materials demonstrated strong antifungal and antibacterial effects against Candida albicans, E. coli, and B. cereus, highlighting their potential for biomedical applications. Furthermore, their anti-cancer potential against HepG2 liver cancer cells was assessed, showing effectiveness and inhibition among the samples. These findings highlight the potential of the synthesized Cr-Cu-C materials in diverse biomedical applications, supported by their structural integrity, morphological features, and antimicrobial properties.

In-vitro and in-vivo investigation of wound healing efficacy of Syzygium cumini leaf extracts loaded carboxymethylcellulose film

The study focused on Syzygium cumini Leaf Extract (SCLE) loaded into Carboxymethylcellulose (CMC) film via Solution casting. Phytochemical screening revealed carbohydrates, and HPLC analysis identified quercetin, known for promoting wound healing. FT-IR spectroscopy confirmed various functional groups. X-Ray diffraction (XRD) determined the crystallite size to be 14.58 nm. Field Emission Scanning Electron Microscopy (FESEM) showed the dispersion of extracts, and Energy Dispersive X-ray (EDX) analysis detailed the weight percentages of components. Antibacterial activity tests revealed zones of inhibition for S. aureus (15 mm) and E. coli (11 mm). The film exhibited 63.11 % antioxidant activity at 517 nm with DPPH at a 750 μl sample concentration. Drug release kinetics were also studied. In-vitro wound healing using the L929 cell line showed 83 % healing at a 100 μl concentration. Over 14 days, the treatment group's wounds healed completely within 7 days, unlike the control groups which showed no recovery after 14 days. These findings indicate that the SCLE-CMC film is highly effective in promoting wound healing.

Encapsulation of Gemcitabine on Porphyrin Aluminum Metal-Organic Framework by Mechano-Chemistry, Delayed Drug Release and Cytotoxicity to Pancreatic Cancer PANC-1 Cells.

Gemcitabine is a widely used antimetabolite drug of pyrimidine structure, which can exist as a free-base molecular form (Gem). The encapsulated forms of medicinal drugs are of interest for delayed and local drug release. We utilized, for the first time, a novel approach of mechano-chemistry by liquid-assisted grinding (LAG) to encapsulate Gem on a "matrix" of porphyrin aluminum metal-organic framework Al-MOF-TCPPH2 (compound 2). The chemical bonding of Gem to compound 2 was studied by ATR-FTIR spectroscopy and powder XRD. The interaction involves the C=O group of Gem molecules, which indicates the formation of the encapsulation complex in the obtained composite. Further, the delayed release of Gem from the composite was studied to phosphate buffered saline (PBS) at 37 °C using an automated drug dissolution apparatus equipped with an autosampler. The concentration of the released drug was determined by HPLC-UV analysis. The composite shows delayed release of Gem due to the bonded form and constant concentration thereafter, while pure Gem shows quick dissolution in less than 45 min. Delayed release of Gem drug from the composite follows the kinetic pseudo-first-order rate law. Further, for the first time, the mechanism of delayed release of Gem was assessed by the variable stirring speed of drug release media, and kinetic rate constant k was found to decrease when stirring speed is decreased (diffusion control). Finally, the prolonged time scale of toxicity of Gem to pancreatic cancer PANC-1 cells was studied by continuous measurements of proliferation (growth) for 6 days, using the xCELLigence real-time cell analyzer (RTCA), for the composite vs. pure drug, and their differences indicate delayed drug release. Aluminum metal-organic frameworks are new and promising materials for the encapsulation of gemcitabine and related small-molecule antimetabolites for controlled delayed drug release and potential use in drug-eluting implants.

Effect of natural Sapindus mukorossi treatment process on bio-waste bagasse fibers for biocomposite fabrication and application purposes

In the present research investigation, a novel natural treatment technique consists of Sapindus mukorossi and citric acid was used to treat the fibers as an alternative to conventional chemical treatments that can have adverse effects on both the environment and human health. The fibers were treated with natural solution for varying time intervals of 24, 48, 72, 96 and 120 h, and reinforced with poly-lactic acid using injection moulding machine. The thermal, mechanical and moisture absorption properties of developed naturally treated biocomposites were examined through FTIR spectroscopy, thermogravimetric analysis, and mechanical analysis to explore the optimal treatment period. The optimal treatment period for the fibers was determined to be 72 h, during which overall properties of biocomposite were observed highest. The biocomposites fabricated with 72 h of treatment exhibited 16.8 % improvement in tensile modulus and 22.8 % increment in flexural modulus as compared to untreated fiber biocomposites. Furthermore, the highest levels of water absorption and impact strength were achieved through treatment duration of 96 h and 48 h, resulting in significant improvements of 63.2 % and 22.2 %, respectively. The assessment of surface characteristics was carried out through the use of optical microscopy and scanning electron microscopy (SEM).

The Impact of Heterogeneity of Aggregates Coated with Asphalt Mortar on Their FTIR Spectra and Spectral Reproducibility

Since FTIR is a sensitive micro-region measurement method, research on the impact of the heterogeneity of both aggregates and asphalt mortar is meaningful and comprehensive for accurate measurement with FTIR spectroscopy. In this paper, the impact of the heterogeneity of aggregates coated with asphalt mortar on their FTIR spectra and spectral reproducibility was creatively studied. The comparative analysis of the respective absorption peaks indicated that the characteristic absorption peaks of the aggregate coated with asphalt mortar were the superposition of the respective absorption peaks of its components. And research on the spectra of the coated aggregates obtained from the same batch of asphalt mixture fabricated at the same time showed that significantly different peak intensities could be affected by minor variations in their components due to the heterogeneity. Furthermore, statistical analysis suggested that the original spectral reproducibility of the coated aggregates was greatly affected by their heterogeneity, with a high coefficient of variation values. In conclusion, the heterogeneity of the coated aggregates could affect peak intensities and spectral reproducibility in micro-regions.

Enhancing photocatalytic dye degradation efficiency through the utilization of shock wave effects on neodymium oxide (Nd2O3)

This article delves into the impact of shockwaves on neodymium oxide (Nd2O3) nanoparticles, aiming to evaluate their physical and chemical stability. Nd2O3 nanoparticles were subjected to varying sets of shock pulses (100, 200, and 300) in photocatalytic dye degradation. The nanoparticles crystallinity and unit cell volume after shockwave exposure were examined using powder X-ray diffraction (PXRD) analysis with unit-cell software. PXRD data revealed no alterations in the crystalline structure, lattice parameter and unit cell volume. Comparisons between pre- and post-shockwave field emission scanning electron microscopy (FE-SEM) portraying data demonstrate that repeated shockwave application causes a decrease in particle size. Raman spectroscopy, under ambient conditions, shows a high intensity after shock conditions intensity will decrease. Furthermore, FTIR spectroscopy revealed the characteristic strong and broad absorption band associated with metal-oxygen (Nd-O) groups in the Nd2O3 nanoparticles. UV–Vis diffuse reflectance spectroscopy (DRS) was used to investigate the bandgap of the Nd2O3 nanoparticles. Initially, the bandgap was measured at 5.96 eV under ambient conditions, but following the shockwave exposure, it was decreased to approximately 5.91 eV. Interestingly, the surface area of the shockwave-treated Nd2O3 nanoparticles is increased and exhibited an increased efficiency in photocatalytic dye degradation. This finding holds promising implications for environmental remediation applications.

Remarkable photodegradation breakdown cost, antimicrobial activity, photocatalytic efficiency, and recycling of SnO2 quantum dots throughout industrial hazardous pollutants treatment

In the conducted research, a one-step hydrothermal synthesis of pure and titanium-doped tin dioxide quantum dots is elaborated upon, with a thorough analysis of their structural, optical, morphological, and photocatalytic properties undertaken using advanced analytical techniques. Through X-ray Diffraction XRD, the crystalline nature and phase purity of the tetragonal structures of SnDs were confirmed, with the crystallite sizes measured at 3.0 nm for SnD1 and 7.66 nm for SnD2, following treatments at 240 °C and 300 °C, respectively. The structural integrity of SnO2 was maintained despite titanium doping. FTIR spectroscopy verified the existence of specific vibrational modes indicative of surface hydroxyl groups. HRTEM images revealed the spherical morphology of particles, with diameters of 3.5 nm for SnD1 and 9.1 nm for SnD2. Optical band gaps, determined through UV-DRS, ranged from 3.33 eV in SnD1 to 3.47 eV in SnDTi2. The photocatalytic degradation of Congo Red dye under xenon lamp irradiation was quantitatively assessed; notably, SnD1 exhibited a 23 % higher rate constant compared to SnD2, attributed to its smaller particle size and a 31 % greater surface area. Doping with 4 % Ti in Sn0.96Ti0.04O2 more than doubled the degradation rate compared to a 6 % Ti doping in Sn0.94Ti0.06O2. Furthermore, the generation of hydroxyl radicals was significantly enhanced, showing an increase of approximately 220 % for SnD1 and 80 % for SnD2. The capability of these nanomaterials to reduce the chemical oxygen demand of industrial organic pollutants to within regulatory limits under solar irradiation was documented, with SnD1 maintaining its photocatalytic efficiency over seven cycles of reuse. In the photocatalytic degradation rate of Congo Red dye, which was 23 % higher for SnD1 compared to SnD2, and the threefold increase in the degradation rate for SnDTi1 compared to SnDTi2. An economic assessment, based on electricity tariffs in Saudi Arabia, highlighted the cost-effectiveness of SnD1, which ranged from 26.93 to 30.36 USD per breakdown cost of the photodegradation process, showing it to be less costly than SnD2. Conversely, SnDTi1 was found to be more economical than SnDTi2, with costs ranging from 26.67 to 33.09 USD. Collectively, the results emphasize the outstanding photocatalytic performance and cost-efficiency of SnDs, reinforcing their potential as sustainable solutions for the treatment of industrial wastewater. Additionally, the antibacterial efficacy of these materials against a range of bacteria, yeast, and fungi was investigated and substantiated.

Conductometric H2S Sensors Based on TiO2 Nanoparticles.

High-performance hydrogen sulfide (H2S) sensors are mandatory for many industrial applications. However, the development of H2S sensors still remains a challenge for researchers. In this work, we report the study of a TiO2-based conductometric sensor for H2S monitoring at low concentrations. TiO2 samples were first synthesized using the sol-gel route, annealed at different temperatures (400 and 600 °C), and thoroughly characterized to evaluate their morphological and microstructural properties. Scanning electronic microscopy, Raman scattering, X-ray diffraction, and FTIR spectroscopy have demonstrated the formation of clusters of pure anatase in the TiO2 phase. Increasing the calcination temperature to 600 °C enhanced TiO2 crystallinity and particle size (from 11 nm to 51 nm), accompanied by the transition to the rutile phase and a slight decrease in band gap (3.31 eV for 400 °C to 3.26 eV for 600 °C). Sensing tests demonstrate that TiO2 annealed at 400 °C displays good performances (sensor response Ra/Rg of ~3.3 at 2.5 ppm and fast response/recovery of 8 and 23 s, respectively) for the detection of H2S at low concentrations in air.

Gas-phase and liquid-phase purification of plastic waste derived carbon nanotubes: Effect of purification agent and operational parameters

The preparation of carbon nanotubes (CNTs) by catalytic pyrolysis of waste plastics is one of the most promising technologies to realize the harmless and high-value recycling of waste plastics. However, there are limited studies on the purification of waste-derived carbons, which is of significance for downstream applications. In this paper, the effects of different gas-phase purification conditions (temperature, gas type), liquid-phase purification (hydrochloric and nitric acid reflux), and combined gas-liquid purification on the properties of CNTs prepared from waste plastics were investigated. The as-obtained and purified CNTs were characterized using SEM, TEM, TPO, XRD, XPS, Raman spectroscopy, and FTIR spectroscopy. Results showed that operational temperatures have distinct impacts on the properties of CNTs during gas-phase purification. An appropriate temperature range for gas-phase purification was determined, with temperatures around 450 °C for air, 650 °C for CO2, and 700 °C for steam respectively, so that the amorphous carbon could be removed and the graphitization of CNTs was retained. Approximately 93 wt% of the metal catalyst particles could be removed with acid treatment for 4 h. In addition, carboxyl and hydroxyl functional groups were introduced to CNTs after acidic treatment. Furthermore, it was found that the approach combining CO2 treatment and nitric acid washing yielded CNTs with relatively higher quantities and lower defect levels. Results showed the properties of CNTs varied from the purification methods, which could meet different needs based on the downstream specific application requirements.

Mesoporous manganese oxide/multiwalled carbon nanotubes as a base material for the 99mTc/99Mo generator: Development, characterization, and implementation study

The uptake capacity of Mo on the active MnO2 nanoparticles was determined in a previous study, and it was found to be 7 mg/g. This value is appropriate for 99Mo, which is more complex to separate due to its production using the 235U fission reaction with a high specific activity. Currently, multiwall carbon nanotubes (MWCNTs) linked to mesoporous MnO2 are being prepared and studied as a novel sorbent for the 99Mo produced with a low specific activity by thermal neutron activation of natural molybdenum consisting of 92M0, 94Mo, 95Mo, 96Mo, 97Mo, 98Mo, and 100Mo, based on the 98Mo(n,γ) reaction to prepare the 99Mo/99mTc generator with a high uptake capacity for Mo. FTIR spectroscopy, EDX-mapping, XRD, particle size analysis, FESEM, and TEM analysis were used to characterize the novel mesoporous MnO2/MWCNT sorbent with a large total pore area 193.3 m2/g and porosity about 52%. Several factors influencing the sorption of 99Mo and 99mTc onto the mesoporous MnO2/MWCNTs were studied, including the distribution coefficient (Kd), contact time, temperature, and sorbent/solute ratio, etc. The Mo uptake capacities on the novel sorbent were 133 and 115 mg Mo/g, respectively. A preliminary study on the prepared new sorbent for the 99Mo/99mTc generator was performed, and the elution yield of 99mTc was found to be 82.55% with low 99Mo breakthrough. The radiochemical, radionuclide, and chemical purity of the eluted 99mTc were checked to ensure that it was free of impurities.

Assessment of the Biodegradability and Compostability of Finished Leathers: Analysis Using Spectroscopy and Thermal Methods.

In this study, the biodegradation properties of leather treated with various finishing chemicals were evaluated in order to enhance the sustainability of leather processing. We applied advanced analytical techniques, including FT-IR, thermogravimetric analysis (TGA), and solid-state NMR spectroscopy. Leather samples treated with different polymers, resins, bio-based materials, and traditional finishing agents were subjected to a composting process under controlled conditions to measure their biodegradability. The findings revealed that bio-based polyurethane finishes and acrylic wax exhibited biodegradability, while traditional chemical finishes like isocyanate and nitrocellulose lacquer showed moderate biodegradation levels. The results indicated significant differences in the biodegradation rates and the impact on plant germination and growth. Some materials, such as black pigment, nitrocellulose lacquer and wax, were beneficial for plant growth, while others, such as polyurethane materials, had adverse effects. These results support the use of eco-friendly finishes to reduce the environmental footprint of leather production. Overall, this study underscores the importance of selecting sustainable finishing chemicals to promote eco-friendly leather-manufacturing practices.

Synthetic approach to new 2H-benzo[b] [1,4]oxazin-3-one derivatives containing 1,2,3-triazole by click chemistry

Owing to the biological importance of 1,2,3-triazoles and benzoxazine-3(4H)-ones scaffolds, we have attempted to design and synthesize novel 1,2,3-traizoles linked to benzoxazin-3-one moiety. Indeed, a novel series of 1,4-disubstituted 1,2,3-triazoles containing 2H-1,4-benzoxazin-3-(4H)-one were synthesized. The 1,2,3-triazoles were obtained in high yields by a double copper-catalyzed azide-alkyne click chemistry reaction between azides and corresponding propargylated benzoxazin-3-ones. These compounds incorporate both the 2H-benzo[b] (Rao et al., 2019; Fringuelli et al., 2009) [1,4]oxazin-3-one motif and two 1,2,3-triazole heterocycles. The synthesized molecules were characterized by spectroscopic techniques such 1H NMR, 13C NMR, FT-IR and elemental analysis.

Synthesis and characterization of chromium aluminum carbide MAX phases (CrxAlCx-1) for potential biomedical applications.

MAX phases, characterized as nanolaminates of ternary carbides/nitrides structure, possess a unique combination of ceramic and metallic properties, rendering them pivotal in materials research. In this study, chromium aluminum carbide ternary compounds, Cr2AlC (211), Cr3AlC2 (312), and Cr4AlC3 (413) were successfully synthesized with high purity using a facile and cost-effective sol-gel method. Structural, morphological, and chemical characterization of the synthesized phases was conducted to understand the effects of composition changes and explore potential applications. Comprehensive characterization techniques including XRD for crystalline structure elucidations, SEM for morphological analysis, EDX for chemical composition, Raman spectroscopy for elucidation of vibrational modes, XPS to analyze elemental composition and surface chemistry, and FTIR spectroscopy to ensure the functional groups analysis, were performed. X-ray diffraction analysis indicated the high purity of the synthesized Cr2AlC phase as well as other ternary compounds Cr3AlC2 and Cr4AlC3, suggesting its suitability as a precursor for MXenes production. Additionally, the antimicrobial activity against Candida albicans and biocompatibility assessments against Escherichia coli (E. coli), Staphylococcus aureus (S. aureus), and HepG2 cell line were investigated. The results demonstrated significant antifungal activity of the synthesized phases against Candida albicans and negligible impact on the viability of E. coli and S. aureus. Interestingly, lower concentrations of Cr2AlC MAX phase induced cytotoxicity in HepG2 cells by triggering intercellular oxidative stress, while Cr3AlC2 and Cr4AlC3 exhibited lower cytotoxicity compared to Cr2AlC, highlighting their potential in biomedical applications.

Green Synthesis and Anticancer Activity of New Bis-Imidazole-Thiazole Hybrids Targeting Hepatocellular Carcinoma

Background: Given the inadequacies of current chemotherapy, there is a need for more effective anticancer agents. Imidazole and thiazole compounds have demonstrated significant biological activity, making them promising candidates. Aims and Objective: This study investigates the anticancer potential of imidazole and thiazole derivatives, focusing on liver cancer. The aim is to synthesize bis-imidazole-thiazole hybrids and evaluate their efficacy as anticancer agents against hepatocellular carcinoma. Methods: The hybrids were synthesized using (2,2'-((1,4-phenylenebis(2-mercapto-4-methyl1H-imidazole-1,5-diyl))bis(ethan-1-yl-1-ylidene))bis(hydrazine-1-carbothioamide), hydrazonoyl halides, and α-halo ketones, catalyzed by DABCO. This method is designed to be fast, yield high amounts of product, and be environmentally friendly. Structural confirmation was provided by FT IR, NMR, and MS spectroscopy. Results: The synthesized hybrids were tested in vitro against HepG-2 and WI-38 cell lines. Compounds 16b, 14a, 16a, and 7b showed significant inhibitory activity, with IC50 values indicating strong inhibition comparable to or better than the standard drug Sorafenib. Conclusion: The bis-imidazole-thiazole hybrids exhibit potent anticancer properties, particularly against hepatocellular carcinoma, making them potential candidates for future cancer therapies. Their selectivity and safety were further demonstrated by their effects on normal WI-38 human fibroblasts.