AlCl3 Research Articles

Biologically Synthesized Gold Nanoparticles Mitigate Aluminum Chloride-Induced Nephrotoxicity via Downregulation of iNOX, LCN2 and IL-1β Genes.

Humans are constantly exposed to aluminum (Al), an environmental toxicant, and its accumulation in the glomerular could lead to acute kidney disease. Biologically synthesized gold nanoparticles (AuNPs) have been employed in the management of kidney disorders. This study assessed the modulatory effect of AuNPs mediated by Hibiscus sabdariffa (HS) on aluminum chloride (AlCl3)-induced nephrotoxicity in rats. Experimental rats were randomly distributed into six groups of seven animals each. Aluminum chloride (100 mg/kg bw) was orally given to the rats for 42 days to induce nephrotoxicity. Treatment with silymarin and HS-AuNPs lasted for 14 days. Serum kidney function, tissue arginase level and oxidative stress biomarkers, as well as tissue gene expression of inducible nitric oxide synthase (iNOS), lipocalin 2 (LCN2) and interleukin-1 beta (IL-1β) were evaluated. Exposure of AlCl3 to the rats produced a marked (p < 0.05) increase in the levels of serum urea and creatinine in comparison with the control. Similarly, tissue arginase and malondialdehyde (MDA) levels were also increased while a reduction in the activity of superoxide dismutase (SOD) and the levels of reduced glutathione (GSH) and nitric oxide (NO) were noted in the AlCl3-induced rats. Aluminum chloride also upregulated the mRNA expression of iNOS, LCN2 and IL-1β in the rats. These biochemical alterations were, however, attenuated by the administration of HS-AuNPs but the 5 mg/kg HS-AuNPs exhibited better anti-nephrotoxic activity than the 10 mg/kg dose, and could, thus serve as a potential dose for managing renal diseases.

The improvement potential of camel milk whey as a natural remedy in comparison with Rivastigmine chitosan-loaded nanoparticles in aluminum chloride induced Alzheimer-like disease in rats

The improvement potential of camel milk whey as a natural remedy in comparison with Rivastigmine chitosan-loaded nanoparticles in aluminum chloride induced Alzheimer-like disease in rats

Determination of Quercetin in Iraqi Green Walnut Husk via Green Ionic Liquid-Based Digestion Extraction and Gel Filtration Procedures-Spectrophotometry and Microfluidic Paper-Based Analytical Platform Detection

في هذه الدراسة تم استخلاص ،عزل وتقدير الكيورستين الموجود في قشور الجوز العراقي باستخدام طريقة جديدة تعتمد على الاستخلاص بطريقة الهضم المبنية على استخدام السوائل الايونية و طريقة الترشيح بالجل للفصل المقترنة مع المطيافية الضوئية للتقدير ومن ثم مقارنتها مع تقنية جديدة تسمى تقنية السوائل المايكروية الورقية مستهدفة بناء طريقة اقتصادية، صديقة للبيئة وخضراء. ولقد تم اختيار 1 بيوتيل-3-مثيل ايمادزوليم كلورايد كمذيب اخضر بديل للمذيبات التقليدية بسبب خصائصة الذوبانية .ولقد اظهرت النتائج ان 100 ملغرام من القشورتحتاج الى 15 مل من المذيب و30 دقيقة من الهضم عند درجة75°C كظروف مثلى لاعطاء افضل ناتج للمستخلص بطريقة الهضم مقارنه مع طرق الاستخلاص الاخرى .تحت هذه الظروف المثلى تم عزل الكيورستين باستخدام طريقة الترشيح بالجل وتم التاكد من المركب المعزول باستخدام تقنية كروموتوغرافيا السائل عالية الاداء و اشعة فورية تحت الحمراء .تم تقدير الكيورستين المعزول من المستخلص لونيا ( طريقة كلوريد الالمنيوم) باستخدام طريقتي المطيافية الضوئية و وتقنية السوائل المايكروية الورقية معطيا الخطية لمنحنيات المعايرة لكلتا الطريقيتين بين 10-100 مليغرام / لتر مع معامل ارتباط0.9369 و 0.7917 لكلتا الطريقتين. ومن ثم تم تقدير الفعالية المضادة للاكسدة باستخجام طريقة قوة الاختزال للمركب المعزول مظهرة فعالية مضادة للاكسدة جيدة و بين تحليل التباين (ANOVA) عدم وجود فرق كبير بين تقنية المطيافية الضوئية وتقنية السوائل المايكروية الورقية. كخلاصة يمكن اعتبار المذيب الايوني BMIMCLمذيبا امنا ومناسبا لاستخلاص المركبات النباتية ذات الخواص الطبية وكذلك فان تقنية السوائل المايكروية الورقية اثبتت مقدرتها على التحليل بكفاءة مساوية الى طرق التحليل التقليدية بالاضافة الى خصائصها الخضراء.

High Molecular Weight Semicrystalline Substituted Polycyclohexene From Alternating Copolymerization of Butadiene and Methacrylate and Its Ambient Depolymerization.

Cyclohexene cannot be polymerized via ring-opening polymerization under any conditions due to its lack of ring strain. A hypothetical polycyclohexene would therefore have a strong thermodynamic driving force to depolymerize to monomer if a metathesis catalyst were provided while otherwise having thermal and hydrolytic stability under normal conditions because of its hydrocarbon backbone. We envisioned access to this otherwise unattainable family of polymers via the alternating polymerization of a diene and an alkene. Ethyl aluminum chloride was found to promote highly alternating polymerization of butadiene and methacrylate when radically initiated at room temperature, resulting in formal polycyclohexene structures. Ultrahigh molecular weight (up to 1750 kDa) polymers can be synthesized at the decagram scale in high monomer conversions. The resulting presumably atactic copolymers exhibited semicrystallinity, leading to high toughness. In the presence of a small amount of the Grubbs catalyst, the generated polycyclohexene can be fully depolymerized at ambient temperatures into pure constituent cyclohexene. The strategy of using orthogonal chemistry for the polymerization and depolymerization processes allows access to polymer structures with subambient ceiling temperatures without using ultralow temperature synthesis or relying on the monomer-polymer equilibrium.

Recycling of secondary aluminum dross to make alumina by hydrometallurgy: A review

Secondary aluminum (Al) dross (SAD) is a hazardous waste discharged from Al production, processing and recycling. Over 6.7 million tons of SAD was discharged on the planet in 2023. SAD is consisted of 40–60 wt% of alumina (Al2O3), 10–30 wt% of AlN, 5–15 wt% of salts and 3–10 wt% of heavy metal oxides. Currently, recycling of SAD to make Al2O3 by hydrometallurgy is a promising method for disposal of SAD. Hydrometallurgy method is mainly divided into acid leaching and alkali leaching. In acid leaching, Al, AlN and Al2O3 react with acid to form aluminum sulfate and aluminum chloride. In alkali leaching, Al, AlN and Al2O3 react with alkali to form sodium aluminate. High-purity Al2O3 is obtained after precipitation, washing, drying and calcination from the leachate. Resource consumption and emission was calculated to evaluate the economic and environmental benefits. About 147.9 and 172.6 dollars was earned after making Al2O3 from a ton of SAD by alkali and acid leaching process, respectively. And carbon emissions of a ton of Al2O3 was risen about 596.5 and 2216.0 kg CO2, respectively, compared with the Bayer process with bauxite. We proposed a calcination pre-treatment with quicklime on SAD to reduce the carbon emission. The Al and AlN are oxidized into Al2O3 after calcination, and the Al2O3 reacts with CaO to form CaO·Al2O3. The Al in CaO·Al2O3 can be leached out easily with a low concentration of alkali. This review provides a guidance for the recycling of SAD by hydrometallurgy, and proposes a novel idea for the energy and consumption reduction in alumina (Al₂O₃) production.

Total Phenolic and Flavonoid Contents, Antioxidant, Antibacterial and Anti-Inflammatory Activities and Toxicities of Ethanol Extracts from Curcuma Mangga, Zingiber Officinale and Zingiber Montanum

The objectives of this study were to determine and to compare total phenolic and flavonoid contents (TPC and TFC), antioxidant, antibacterial and anti-inflammatory activities and toxicities of ethanol extracts from Curcuma mangga, Zingiber officinale and Zingiber montanum. The study was performed by determinations of 1) TPC using Folin-Ciocalteu reagent method and TFC using colorimetric method of aluminum chloride, 2) antioxidant activities using DPPH, ABTS and FRAP assay, 3) antibacterial activities through evaluation inhibition of bacterial growth, MIC and MBC against Bacillus cereus, Bacillus subtilis, Escherichia coli, and Staphylococcus aureus, 4) anti-inflammatory activity using Griess reaction to measure nitric oxide (NO) production in LPS-stimulated RAW 264.7 macrophage cells and 5) toxicities using lethality assay in brine shrimps and MTT assay in the RAW 264.7 cells. The results revealed that all the extracts possess TPC and TFC, antioxidant, antibacterial and anti-inflammatory activities which the highest TPC and TFC and strongest activities were found in the Z. montanum extract. However, the extracts showed mildly to moderately toxic to brine shrimps, consider to Artemia salina nauplii, and nontoxic to the RAW 264.7 cells. And also, the results confirm the utilization of these extracts for the treatment and/or management of diseases that related to antioxidant, antibacterial and anti-inflammatory activities.

Preparation of polymeric aluminum chloride from secondary aluminum dross and its water purification effect

ABSTRACT Aluminum dross is solid waste generated by the aluminum industry. Currently, a large amount of aluminum dross is produced annually year. Aluminum dross, a hazardous waste, contains harmful substances such as aluminum metal, aluminum nitride, fluoride and chlorine salts, which pose a serious threat to human health and also cause damage to the ecological environment. Thus, it is important to recycle secondary aluminum dross and realise its high-value utilisation. Polymeric aluminum chloride (PAC) is a polymer flocculant, at present, China's annual use of PAC in the field of water treatment is about 5 × 105 t, and with the continuous improvement of water purification requirements, the annual use of PAC increased year by year. Here secondary aluminum dross was used as a raw material to prepare PAC by hydrochloric acid (HCl) leaching, followed by the addition of sodium carbonate. The optimal conditions for the acid leaching of secondary aluminum dross for the preparation of PAC were as follows: HCl concentration, 18%; liquid-to-solid ratio, 4.5:1; stirring rate, 200 r/min; reaction temperature, 90 °C; and 60 min. An aluminum leaching rate of 85.5% was obtained under these conditions. The results showed that the acid leachate after adding sodium carbonate, under the conditions of polymerisation temperature of 70 °C, polymerisation time of 6 h, and polymerisation pH value of 3.0, the PAC prepared had an alumina content of 10.19%, salinity of 32.37%, density of 1.32 g/cm3, 1% aqueous solution pH 4.3. The water purification effect of the prepared PAC surpassed that of the commercially available PAC. The utilisation of secondary aluminum dross can reduce the environmental pollution caused by aluminum slag.

Aggravated dyslipidemia in diabetic albino rats after subchronic oral aluminium chloride exposure

Aggravated dyslipidemia in diabetic albino rats after subchronic oral aluminium chloride exposure

Retraction Note: Neuroprotective Effect of Hesperidin on Aluminium Chloride Induced Alzheimer's Disease in Wistar Rats.

Retraction Note: Neuroprotective Effect of Hesperidin on Aluminium Chloride Induced Alzheimer's Disease in Wistar Rats.

Modelling the predictive analysis of turbidity removal efficiency in the in-line coagulation and flocculation process

Coagulation and flocculation processes are commonly used in conventional water treatment plants to remove suspended solids from water. However, these methods often suffer from drawbacks such as high chemical consumption, sludge generation, and the need for huge areas, leading to high construction costs. To address these limitations, this study investigated the performance of in-line coagulation and flocculation processes as an alternative to conventional methods. The objectives were to determine the efficiency of in-line coagulation and flocculation, understand the underlying mechanisms, establish optimal operating conditions and design criteria, and to develop theoretical models for predicting turbidity removal efficiency in the in-line coagulation-flocculation process. Experiments were conducted using a continuous setup consisting of a static mixer and a 35-m helically coiled hydraulic tube flocculator.Various operating parameters, including water flow rate (100 – 800 L/hr), initial turbidity (20 – 200 NTU), and coagulant types (aluminum sulfate, poly aluminum chloride, aluminum chlorohydrate, and ferric chloride), were examined. The results demonstrated that aluminum sulfate was the appropriate coagulant for the water characteristics studied, and the in-line coagulation and flocculation processes achieved turbidity removal efficiencies of approximately 91 % under all operating conditions, with a notable 97 % removal efficiency achieved at a liquid flow rate of 600 L/hr, with a Gt value of 21,715 and an overflow rate of 2 m/hr. A prediction model of turbidity removal efficiency was developed, showing good agreement between experimental and predicted removal efficiency model, with an average deviation of about 20 %. This model can aid in determining optimal operating conditions and serve as a hybrid process in future water treatment systems, potentially applicable to other separation processes as well.

Fabrication and characterization of blue nano ceramic-inks: Utilization of cobalt aluminate pigments prepared by solid state method

The current study focuses on the development and fabrication of ceramic nano inks with improved properties. Firstly, two types of pigments were prepared through a solid state process using fine gibbsite (Al(OH)3) or aluminum chloride (AlCl3) with cobalt chloride hexahydrate (CoCl2.6H2O). The stoichiometric precursors were well-mixed and fired at 1000oC; then milled by a high energy ball mill to obtain nano pigments. The prepared pigments were investigated for their phase composition and crystallite size by X-ray diffraction, and further confirmed by Fourier Transform Infrared (FTIR). The morphology and particle size were examined using a scanning electron microscope. The optical properties in terms of UV–Vis, photoluminence emission spectra and CIE chromaticity diagram were also tested. The chemical-state of cobalt and surface elemental composition of prepared Co-aluminate pigments were tested by X-ray photoelectron spectroscopy (XPS). Four groups of ceramic-inks (twelve formulations) were prepared using different percentages of cobalt aluminate pigments and additives. The fabricated inks were investigated for their morphology, rheology, contact-angle and sedimentation behavior. The results revealed that two cobalt aluminate pigments with spinel structure, nano sized particles and blue color, were successfully prepared by the proposed method. The results of optical properties indicated that the cobalt ions are located mainly in tetrahedral sites with a small amount in octahedral sites. The prepared pigments were successfully used in the fabrication of ceramic nano inks with improved properties. The viscosity of most fabricated inks was in the range needed for the industry (4–40 mPa s).

Pilot-scale conditioning of starch-based flocculant for cyanobacterial thickening and dewatering: Mechanism investigation and effect verification

Existing cyanobacteria thickening and dewatering processes in Taihu Lake commonly use conventional inorganic flocculants to condition the cyanobacteria, which poses certain environmental risks. In this study, three different types of typical flocculants, namely polymerized aluminum chloride (PAC), cationic polyacrylamide (CPAM) and starch-based flocculant (St-CTA), were selected to investigate their flocculant effects on cyanobacteria and the mechanism of action. The analysis showed that the dosage of St-CTA was low, the flocculation efficiency was high, and it could form flocs with large particle size and high strength. The adsorption and precipitation effect of St-CTA on protein and polysaccharide in flocculated EPS was stronger than that of CPAM and PAC, and it was able to act on the protein structure of EPS favorable for flocculation, improve the hydrophilic effect of S-EPS and LB-EPS, and reduce the content of bound water in EPS from 2.08 to 1.22 g/g DS, thus improving the efficiency of algae-water separation. The free energy and energy barrier of the EPS surface in each layer of the cyanobacterial floc after flocculation by St-CTA were significantly reduced, which resulted in the tendency of the cyanobacterial particles to aggregate and thus flocculate and settle. The pilot validation of St-CTA for cyanobacteria dewatering showed that the water content of algal residue could be reduced to 93.48 %, and the removal efficiencies of total nitrogen (TN), total phosphorus (TP), ammoniacal nitrogen (NH3-N), and chemical oxygen demand (COD) in the air-floated water could be up to 27.3 %, 76.6 %, 27.4 %, and 56.4 %, respectively. In conclusion, this study provides scientific knowledge and demonstration for promoting the use of St-CTA to condition cyanobacterial thickening and dewatering, which is a new idea to solve the problem of cyanobacterial resourcefulness and safe utilization.

Phytochemical Screening and Pharmacological Activities of Gentiana ornata from Lauribinayak, Rasuwa, Nepal

Gentiana ornata (Wall. ex G. Don) Griseb, also called decorated gentian or showy gentian, has been used as a decoction plant in temperate regions of Nepal. This work aims to evaluate the phytochemical properties, antioxidant values, and pharmacological properties of this plant collected from Lauribinayak, Gosainkunda Rural Municipality, Rasuwa, Nepal. The extract of whole plant was prepared by cold extraction process at 100% ethanol. Then, the qualitative preliminary phytochemical test of plant extract was performed to know its chemical constituents. The total phenolic content using Folin-Ciocalteu method, total flavonoid content using aluminium chloride colorimetric assay and antioxidant potential of the plant extract were also determined by using diphenylpicrylhydrazyl (DPPH) reagent. The pharmacological activities like oral acute toxicity test, antidiarrheal test and anti-ulcer test were also carried out in laboratory animals. The qualitative phytochemical screening showed the presence of flavonoids, steroids, glycosides, anthocyanin, alkaloids, terpenoids, and phenolic constituents. The total phenolic content, total flavonoid content and antioxidant assay value of this plant extract were 242.64±0.280 mg GAE/g, 39.23±0.005 mg QE/g and 42±0.072 µg/mL respectively. The extract showed no morbidity, mortality, toxicity signs, or symptoms in the oral acute toxicity test. Though it could not show considerable antidiarrheal effect by reducing gastrointestinal motility when compared to the standard drug, loperamide, it showed significant anti-ulcer effects by reducing gastric lesions when compared to the standard drug, sucralfate, which may be due to its mucosal protecting nature. Therefore, isolation and purification of phytochemicals responsible for the pharmacological activity of this plant have been recommended.

Absorptive Capacity of Gingival Retraction Cords in Hemostatic Solutions: An In Vitro Study.

Background and Objectives: Gingival retraction is a critical pre-impression procedure in fixed prosthodontics, crucial for exposing tooth margins and ensuring accurate impressions for restorations like crowns and bridges. This study aimed to evaluate the absorptive capacity of different gingival retraction cords. Materials and Methods: Ninety samples each of Ultrapak (Ultradent, South Jordan, UT, USA) #00, braided cord, coreless thread, and monofilament thread (totaling 270 samples) were immersed in 0.9% NaCl, 10% aluminum chloride, and 12.7% ferrous sulfate solutions for 120, 300, and 1200 s. The liquid absorption capacity was measured using a gravimetric method, and the data were analyzed using an F-test, setting the significance threshold at p < 0.05. Results: The results revealed statistically significant differences in absorption, particularly for aluminum chloride and ferric sulfate (p < 0.001). Ultrapak demonstrated the highest absorption, followed by the coreless cotton thread, while the monofilament thread absorbed the least, especially at 1200 s. Conclusions: These findings indicate that Ultrapak's superior absorption could enhance moisture control during procedures, highlighting the importance of selecting an appropriate retraction cord for optimal clinical outcomes. Further research is needed to confirm these findings in a clinical setting.

Chronic aluminium chloride exposure induces redox imbalance, metabolic distress, DNA damage, and histopathologic alterations in Wistar rat liver.

Aluminium, a ubiquitous environmental toxicant, is distinguished for eliciting a broad range of physiological, biochemical, and behavioural alterations in laboratory animals and humans. The present work was conducted to study the functional and structural changes induced by aluminium in rat liver. Twenty five adult male Wistar rats (150-200 g) were randomly divided into five groups; control group and four Al-treated groups viz: Al 1 (25mg AlCl3/kg b.wt), Al 2 (35mg AlCl3/kg b.wt), Al 3 (45mg AlCl3/kg b.wt), and Al 4 (55mg AlCl3/kg b.wt). Rats in the aluminium-treated groups were administered AlCl3 for 30 days through oral gavage. Aluminium significantly increased the serum levels of liver function markers (ALT, AST, and ALP), phospholipids, and cholesterol. The activities of hepatocyte membrane (ALP, GGT, and LAP) and carbohydrate metabolic (G6P, F16BP, HK, LDH, MDH, ME, and G6PDH) enzymes were significantly altered by AlCl3 administration. Prolonged Al exposure induced oxidative stress in the liver, as evident by significant hepatocellular DNA damage, increased lipid peroxidation, and decreased non-enzymatic and enzymatic antioxidants. The toxic effects observed in this study were AlCl3 dose-dependent. Histopathological examination of liver sections revealed enlargement of sinusoidal spaces, derangement of the hepatic chord, loss of discrete hepatic cell boundaries, congestion of hepatic sinusoids, and degeneration of hepatocytes in Al-intoxicated rats. In conclusion, aluminium causes severe hepatotoxicity by inhibiting the hepatocyte membrane enzymes and disrupting the liver's energy metabolism and antioxidant defence.

Evaluation and optimization of six adsorbents for removal of tetracycline from swine wastewater: Experiments and response surface analysis

The removal of tetracycline antibiotics using adsorbents is becoming an environmentally friendly and cost-effective method. This study systematically analyzed the stability, structure, morphology, and chemical properties of various adsorbents. Batch adsorption experiments (pH, time, temperature, tetracycline concentration, and adsorbent dosage) were conducted to compare the adsorption capacity of the six adsorbents (biochar, activated carbon, montmorillonite, zeolite, chitosan, and polymerized aluminum chloride) for tetracycline removal. The results indicated that montmorillonite had the highest adsorption efficiency, followed by biochar, with chitosan showing the lowest efficiency. At an adsorbent dose of 25 g/L and an initial tetracycline concentration of 120 mg/L, the removal rates of tetracycline by montmorillonite, biochar, and chitosan were 97.6%, 69.3%, and 12.2%, respectively. Furthermore, the removal rate of tetracycline by biochar, following the response surface methodology optimal mode, increased by 5.5%. The Elovich model was better suited to explain the adsorption process of tetracycline compared to the conventional pseudo-first kinetic model and second-order kinetic model. The isothermal adsorption model suggested that both chemisorption and physisorption occurred in all removal processes, in which chemisorption dominated. Tetracycline was efficiently adsorbed through the combined effects of pore filling, electrostatic attraction, π-π interactions, and complexation reactions of surface functional groups. Additionally, montmorillonite demonstrated superior performance as an adsorbent for tetracycline removal from swine wastewater compared to the other adsorbents studied.

Preclinical efficacy of oral and nasal rivastigmine-loaded chitosan nano-particles on AlCl3-induced Alzheimer’s-like disease in rats

The successful treatment of Alzheimer’s disease (AD) is still a big challenge. Rivastigmine is one of the most used drugs for the treatment of AD. The short half-life, lower bioavailability, and less concentration of the drug in the brain after oral delivery are considered the main drawbacks of rivastigmine. To improve these drawbacks, nanostructure-mediated drug delivery has gained more attention. This study investigates the effect of rivastigmine-loaded in optimized chitosan nano-particles (RS-CSNPs) as polymeric nano-carriers by different administration routes (oral and intranasal) on aluminum chloride (AlCl3)-induced Alzheimer-like disease in rat. The model was established by giving rats 100 mg/kg/b.wt of AlCl3 orally for 3 months. Then the experimental rats were treated with RS-CSNPs either orally or intranasally for 75 days. Histopathology, immunohistochemistry of Tau expression in brain tissue, and gene expression of Caspase-3, NF-κB, and Nrf-2 were carried out. The therapeutic agents used decreased the alterations observed in AlCl3 group with improvement in the neuronal viability. In addition to low expression of tau protein, down-regulation of caspase-3 and NF-κB genes and up-regulation of Nrf-2. RS-CSNPs alleviated the progression of AD presumably via blocking the inflammatory cascade and decreasing the oxidative stress process. The intranasal route is superior to the oral one and promising in AD management.

Flexible Aluminum-Air Batteries

Wearable and flexible electronics have a wide range of applications. Making a flexible power source for them is essential. Aluminum-air batteries are attractive for powering portable, lightweight devices due to their inexpensive, light, and powerful energy source. In this project, the Al-air battery was made using activated carbon and aluminum electrodes, chloride-based electrolytes with ionic liquid additives. Various mixtures of 1-ethyl-3-methylimidazolium chloride, aluminum chloride, sodium hydroxide, and sodium chloride were studied. Fundamental properties of room-temperature ionic liquids, such as lower conductivity and density, improved the performance of aluminum-air batteries. Cell capacity, cyclic voltammetry behavior, and cell interfacial impedance with various electrolytes were optimized using the design of experiments. The battery's electrical power output and cell capacity were lower than those obtained using an activated carbon air cathode. The cell capacity over repeated electrochemical reactions was stable. The Al-air battery had regular cyclic voltammetry behavior. Aluminum hydroxide was not found on the anode electrode when an ionic liquid electrolyte was used. The interfacial cell impedance did not decrease after electrochemical reactions over a long time.

Bioaccumulation of Aluminium Chloride in Different Organs of Freshwater Fish Labeo rohita (Ham.)

The present research work was carried out to determine the bioaccumulation of aluminium chloride in the gills, liver, Kidney and muscles of Labeo rohita. Sub-lethal concentration (LC50) for 96 hours of exposure was found to be 32.5 ppm. The accumulation of heavy metal gradually increases in liver during the heavy metal exposure period. In the present study the accumulation of aluminium chloride was not found in tissues like gill, liver, kidney and muscle in control fish, whereas in treated fish the accumulation was found in the following order of liver&gt;kidney&gt;gill&gt;muscle. Changes in the aluminium chloride content of muscle tissue in treated fish against the control fish were statistically significant at P&lt;0.05. In all heavy metal, the bioaccumulation of aluminium chloride proportion was significantly increased in the tissues of Labeo rohita. This study revealed the accumulation of heavy metals in fish Labeo rohita which may act as an indicative measure to address the production, bioaccumulation and health hazardous issues of heavy metals.

Neuroprotective action of hordenine against the Aluminium Chloride (AlCl3) induced Alzheimer's diseases & associated memory impairment in experimental rats

ObjectiveTo investigate the neuroprotective action of hordenine against the cognitive dysfunction induced by aluminium chloride (AlCl3) in Wistar rats MethodologyRats were given oral doses of hordenine (25 and 50 mg/kg), donepezil (5 mg/kg), and AlCl3 (175 mg/kg) for 28 days. During the study, neurobehavioral parameters included Morris water maze (MWM), open field test (OFT), and novel object recognition test (NORT) to assess the cognitive effect. On the 29th day rats were sacrificed and brain tissues removed for biochemical and histopathological analyses. ResultsAlCl3 rats exhibited altered neurobehavioral patterns and cognitive impairment in experimental rats. Although AlCl3 raised the levels of mid-brain acetylcholinesterase (AChE), lipid peroxidation (LPO), nitrite, tumour necrosis factor-α (TNF-α), interleukin-β (IL-β), nuclear factor-kappa B (NF-κB), brain-derived neurotrophic factor (BDNF), and it decreased the levels of antioxidants including glutathione (GSH), catalase, superoxide dismutase (SOD), and body weight. In cortical and hippocampal slices, AlCl3 also revealed anatomical alterations that resulted in a decrease in the density of microglia. But donepezil and hordenine reversed these alterations to normal while demonstrating a neuroprotective effect against AD which is caused by AlCl3. ConclusionHordenine improved memory and other cognitive functions, demonstrating a neuroprotective effect against AlCl3-induced Alzheimer's disease. These findings imply that hordenine may be able to reverse the effects of oxidative stress and neuroinflammation, improve cognitive decline, and protect the brain's histological structure.