Ultrasound Frequency Research Articles

Advancing Wastewater Treatment: A Comparative Study of Photocatalysis, Sonophotolysis, and Sonophotocatalysis for Organics Removal

Clear and sanitarily adequate water scarcity is one of the greatest problems of modern society. Continuous population growth, rising organics concentrations, and common non-efficient wastewater treatment technologies add to the seriousness of this issue. The employment of various advanced oxidation processes (AOPs) in water treatment is becoming more widespread. In this review, the state-of-the-art application of three AOPs is discussed in detail: photocatalysis, sonophotolysis, and sonophotocatalysis. Photocatalysis utilizes semiconductor photocatalysts to degrade organic pollutants under light irradiation. Sonophotolysis combines ultrasound and photolysis to generate reactive radicals, enhancing the degradation of organic pollutants. Sonophotocatalysis synergistically combines ultrasound with photocatalysis, resulting in improved degradation efficiency compared to individual processes. By studying this paper, readers will get an insight into the latest published data regarding the above-mentioned processes from the last 10 years. Different factors are compared and discussed, such as degradation efficiency, reaction kinetics, catalyst type, ultrasound frequency, or water matrix effects on process performance. In addition, the economic aspects of sonophotolysis, photocatalysis, and sonophotocatalysis will be also analyzed and compared to other processes. Also, the future research directions and potential applications of these AOPs in wastewater treatment will be highlighted. This review offers invaluable insights into the selection and optimization of AOPs.

Application of Portable Near-Infrared Instrument for Analysis of Spirulina platensis Aqueous Extracts

Spirulina platensis microalga has become recognized as a promising source of highly nutritious food components to feed the growing global population. Because of its high protein content, abundance of essential amino acids, and excellent digestion, it is employed in human nutrition and there is growing interest in analyzing bioactive compound present in Spirulina platensis microalga. In this work, a portable near-infrared (NIR) spectrometer was used for the monitoring of physicochemical properties (extraction yield (EY), total polyphenols concentration (TPC), total proteins concentration (TP), antioxidant activity measured by (i) the DPPH method (DPPH) and (ii) FRAP method (FRAP)) of Spirulina platensis aqueous extracts. The ultrasound-assisted aqueous extraction (ultrasonic bath with an ultrasound frequency of 35 kHz) of bioactive molecules from Spirulina platensis was performed throughout 30 independent experiments. NIR spectra were recorded in the wavelength range of 900–1700 nm. Raw NIR spectra were subjected to the physicochemical properties applying Principal Component Analysis (PCA), partial least square (PLS), and artificial neural network (ANN) modeling. Results show that ANN models developed for the prediction of TPC and DPPH can be utilized for extraction process control (RER > 10), while the other three models can be employed for screening (RER > 4). Generally, the obtained results indicate significant potential for using portable NIR spectroscopy for the analysis of Spirulina platensis aqueous extracts.

Airy-beam holographic sonogenetics for advancing neuromodulation precision and flexibility

Advancing our understanding of brain function and developing treatments for neurological diseases hinge on the ability to modulate neuronal groups in specific brain areas without invasive techniques. Here, we introduce Airy-beam holographic sonogenetics (AhSonogenetics) as an implant-free, cell type-specific, spatially precise, and flexible neuromodulation approach in freely moving mice. AhSonogenetics utilizes wearable ultrasound devices manufactured using 3D-printed Airy-beam holographic metasurfaces. These devices are designed to manipulate neurons genetically engineered to express ultrasound-sensitive ion channels, enabling precise modulation of specific neuronal populations. By dynamically steering the focus of Airy beams through ultrasound frequency tuning, AhSonogenetics is capable of modulating neuronal populations within specific subregions of the striatum. One notable feature of AhSonogenetics is its ability to flexibly stimulate either the left or right striatum in a single mouse. This flexibility is achieved by simply switching the acoustic metasurface in the wearable ultrasound device, eliminating the need for multiple implants or interventions. AhSonogentocs also integrates seamlessly with in vivo calcium recording via fiber photometry, showcasing its compatibility with optical modalities without cross talk. Moreover, AhSonogenetics can generate double foci for bilateral stimulation and alleviate motor deficits in Parkinson's disease mice. This advancement is significant since many neurological disorders, including Parkinson's disease, involve dysfunction in multiple brain regions. By enabling precise and flexible cell type-specific neuromodulation without invasive procedures, AhSonogenetics provides a powerful tool for investigating intact neural circuits and offers promising interventions for neurological disorders.

Optimisation of the depth range of UIV on cohesive sediment (fluid mud) flows

Ultrasound Image Velocimetry (UIV) is a technique that enables the monitoring of flows in natural high-density cohesive sediments, also known as fluid mud. Using conventional medical ultrasound imaging equipment, the depth range of UIV in mud is however too limited. This manuscript discusses how this depth range can be improved based on the results of experimental UIV measurements in fluid mud. The results show that the depth range limitation is determined by the pixel brightness of the generated speckle pattern images. Since pixel brightness is a measure of the intensity of the backscattered signals, it degrades with increasing depth due to the attenuation of the ultrasound radiation by the mud. The rate at which ultrasound is attenuated by fluid mud is constant and is governed by the density of the mud and the applied ultrasound frequency. A greater depth range can thus be achieved by reducing attenuation and increasing the intensity of the emitted ultrasound. The former was confirmed by the results of experiments with variable mud density and ultrasound frequency. Flexibility of both parameters is however restricted, allowing only a limited increase in depth range. Another experiment confirmed an additional increase in depth range when a higher ultrasound intensity is applied. Patient safety measures of medical ultrasound imaging equipment, however restrict the intensity of the emitted ultrasound. To increase the depth range even further, potential solutions are therefore suggested, such as the use of high-power non-medical ultrasound imaging equipment or a novel procedure for processing the acquired acoustic data.

The Influence of the Frequency of Ultrasound on the Exhaust Gas Purification Process in a Diesel Car Muffler

This research aimed to analyze the possibility of installing an ultrasonic emitter in an already manufactured car and to prove the possibility of cleaning the exhaust gases of an internal combustion engine through the action of an ultrasonic wave due to coagulation and examining the optimal regimes of its work. The existing theoretical solution to describe the proposed process was analyzed. A Mercedes-Benz M-Class ML 270 CDI MT car with the OM 612 DE 27 LA Diesel engine was used for the experiment. An ultrasound generator and an ultrasound emitter were connected to the muffler. The stand was connected to the car via the inlet with a rubber hose that directs the exhaust gases out of the car. The crankshaft speed of the engine was changed in the range of 750 to 1250 rpm, which corresponds to urban conditions when cars are moving in heavy traffic jams. The content of CH, CO, CO2, and O2 in the exhaust gas of the vehicle was determined as a function of the crankshaft speed without ultrasonic exposure and with ultrasonic exposure at an ultrasound frequency of 25, 28, and 40 kHz. The results of the experiment showed that the introduction of an ultrasonic emitter into the muffler reduced the smoke content of the gas, increased the oxygen content, and reduced the amount of carbon dioxide in the exhaust gases. With an increase in the ratio between the ultrasonic frequency and the angular velocity of the engine crankshaft (f/ω), the smoke content of the gas also decreased. At the maximum values of ultrasonic frequency and angular velocity of the engine crankshaft selected in the experimental studies, the minimum value of the ratio of gas smoke indicators was achieved, and the degree of purification was 10–13%. Such results correspond to the condition of optimal operation of the ultrasonic muffler, where the ratio of gas to smoke values should tend to a minimum. These results confirm the potential of using ultrasound as a method for cleaning exhaust gases and underline the need for further research in this area.

Interaction of ultrasonically driven bubble with a soft tissue-like boundary

This study investigates the size-dependent dynamics of bubbles and their interaction with soft boundaries under various ultrasound (US) conditions. We found that bubble behavior is influenced by size, with smaller bubbles displaying reduced inertial motion in similar ultrasound environments. Detailed analyses of three bubble sizes (1.5 µm, 15 µm, and 150 µm) next to a soft 1 kPa boundary revealed distinct patterns in radial oscillation, bubble center displacement, and boundary deflection for different ultrasound frequencies (5 kHz − 4 MHz). The smallest bubble maintained a spherical shape, while the largest experienced significant shape changes, indicative of impending jet formation. Investigating interactions at various frequencies highlighted the collapse tendency of the larger bubbles, showcasing maximum radial amplitude, displacement, and bubble wall velocity around its natural frequency. The presence of a soft boundary minimally affected radial amplitude and velocity, while the bubble displacement was contingent on the soft boundary modulus. Furthermore, boundary responses demonstrated that softer boundaries experienced less stress during bubble oscillations, exhibiting sharper peaks at resonance frequencies for larger bubbles. These findings provide valuable insights into optimizing ultrasound conditions for a variety of applications, highlighting the influence of bubble size and boundary properties on outcomes.

Addressing muscle–tendon imbalances in adult male athletes with personalized exercise prescription based on tendon strain

PurposeImbalances of muscle strength and tendon stiffness can increase the operating strain of tendons and risk of injury. Here, we used a new approach to identify muscle–tendon imbalances and personalize exercise prescription based on tendon strain during maximum voluntary contractions (εmax) to mitigate musculotendinous imbalances in male adult volleyball athletes.MethodsFour times over a season, we measured knee extensor strength and patellar tendon mechanical properties using dynamometry and ultrasonography. Tendon micromorphology was evaluated through an ultrasound peak spatial frequency (PSF) analysis. While a control group (n = 12) continued their regular training, an intervention group (n = 10) performed exercises (3 × /week) with personalized loads to elicit tendon strains that promote tendon adaptation (i.e., 4.5–6.5%).ResultsBased on a linear mixed model, εmax increased significantly in the control group over the 9 months of observation (pCon = 0.010), while there was no systematic change in the intervention group (pInt = 0.575). The model residuals of εmax, as a measure of imbalances in muscle–tendon adaptation, demonstrated a significant reduction over time exclusively in the intervention group (pInt = 0.007). While knee extensor muscle strength increased in both groups by ~ 8% (pCon < 0.001, pInt = 0.064), only the intervention group showed a trend toward increased normalized tendon stiffness (pCon = 0.824, pInt = 0.051). PSF values did not change significantly in either group (p > 0.05).ConclusionThese results suggest that personalized exercise prescription can reduce muscle–tendon imbalances in athletes and could provide new opportunities for tendon injury prevention.

Analysis of Microbubble-Blood cell system Oscillation/Cavitation influenced by ultrasound Forces: Conjugate applications of FEM and LBM

Sonoporation is a non-invasive method that uses ultrasound for drug and gene delivery for therapeutic purposes. Here, both Finite Element Method (FEM) and Lattice Boltzmann Method (LBM) are applied to study the interaction physics of microbubble oscillation and collapse near flexible tissue. After validating the Finite Element Method with the nonlinear excited lipid-coated microbubble as well as the Lattice Boltzmann Method with experimental results, we have studied the behavior of a three-dimensional compressible microbubble in the vicinity of tissue. In the FEM phase, the oscillation microbubble with a lipid shell interacts with the boundary. The range of pressure and ultrasound frequency have been considered in the field of therapeutic applications of sonoporation. The viscoelastic and interfacial tension as the coating properties of the microbubble shell have been investigated. The presence of an elastic boundary increases the resonance frequency of the microbubble compared to that of a free microbubble. The increase in pressure leads to an expansion in the range of the microbubble’s motion, the velocity induced in the fluid, and the shear stress on the boundary walls of tissue. An enhancement in the surface tension of the microbubble can influence fluid flow and reduce the shear stress on the boundary. The multi-pseudo-potential interaction LBM is used to reduce thermodynamic inconsistency and high-density ratio in a two-phase system for modeling the cavitation process. The three-dimensional shape of the microbubble during the collapse stages and the counter of pressure are displayed. There is a time difference between the occurrence of maximum velocity and pressure. All results in detail are presented in the article bodies.

Advancing precision medicine in cutaneous oncology through 3D high-frequency ultrasound imaging.

e13625 Background: Clinical assessment of tumor depth and shape often requires biopsy, especially when evaluating skin cancers. High Frequency Ultrasound (HFUS) is a non-invasive clinical tool that can quickly produce high resolution images ideally suited for evaluating topical tumors. In comparison to other imaging modalities, HFUS do not always provide the spatial data required to model 3-dimensional (3D) tumors. Currently, 3D-images are an amalgamation of many segmented image slices. However, in outpatient clinics it is unrealistic for HFUS devices and clinicians to gather large sets of image data. In our present original research, we aimed to overcome limited number of HFUS and dermatoscopic images by constructing a simple framework to process sparse and non-spatial data into working 3D skin tumor models. Methods: We analyzed two different skin tumors, the dermal duct tumor (DDT) and basal cell carcinoma (BCC), each with different number of HFUS images at 30Hz and 50Hz respectively. 1 set of 6 parallel images were obtained for the BCC, while 2 orthogonal sets of 6 parallel images were obtained for the DDT. For each tumor, a single dermatoscopic photo and sets of bitmap HFUS images with a resolution of 1024 x 512 were taken. Our study was IRB-approved. Mathematica and MATLAB, both with accessible documentation, were used to process images. Results: We developed a novel algorithmic approach to produce 3D tumor models with limited medical data. Both tumors appear corporally hypoechoic under HFUS. Mathematica was used to first reduce HFUS image noise and binarize the tumor region with a bilateral Gaussian filter. The user-friendly MATLAB Image Segmenter application manually filled the region of interest. Next, Mathematica was used to orient and plot tumor borders in 3D. Finally, we encompassed the borders with a 3D convex hull to conservatively predict tight margins around the tumor. Conclusions: Our simplified approach allows clinicians and scientists to produce 3D renderings of tumor margins. Margin control must always be balanced with a positive surgical outcome. By approaching our 3D-model with a convex hull around sampled border cross-sections, we chose a conservative approach that focuses skin tumor margin evaluation. Our results promote precision medicine and planning into the current standard of skin cancer treatment. Our findings can allow tracking tumor progression or treatment possible via non-invasive evaluation of tumor depth and contour. An aim of our present research is to lower the barrier of 3D construction in clinical settings. Simple algorithms, such as shown in our work, transform orthogonal and sparse data into usable data that can be implemented to train machine learning and artificial intelligent programs. Future research tailoring this approach may allow instant programming of HFUS images to non-invasively render cutaneous tumor borders and depth in real time during clinical examination.

Numerical Study on the Dynamics of a Charged Bubble in the Acoustic Field

In this paper, the dynamics of an acoustic bubble with a constant charge in compressible liquid are investigated numerically, which is based on the Gilmore-NASG model to estimate the radial oscillations. The cavitation effects are enhanced due to the presence of the charge on the bubble surface. The obtained results from the present model are compared with that calculated by the previous model within a wide range of parameters (e.g., charge, acoustic pressure amplitude, ultrasound frequency, and liquid temperature). The similar influences of these parameters on bubble collapse intensity can be observed from both models. Since the present model fully considers the compressibility of gas and liquid, it can be applied to a wider parameter range and leads to the larger predicted values. The research in this paper can provide important insights about the effects of charge on bubble dynamics and the acoustic cavitation applications (e.g., sonochemistry, water treatment, and food industry).

Effects of operating parameters on single-stage ultrasonic separation of ethanol from its aqueous solutions

The effects of operating parameters on separation of ethanol from its aqueous solutions using ultrasonic atomization were investigated in a single-stage process. With an experimental setup similar to those used in previous work, we measured the degree of enrichment and the combined molar collection rate of ethanol and water for a single combination of the ultrasound power and frequency at 126 combinations of bulk liquid depth, composition, and temperature; carrier-gas inlet/outlet elevation and flow rate; and collection temperature. Enrichment depends strongly on bulk liquid composition, reaching a maximum at an ethanol mole fraction below 0.1, with the maximum enrichment depending on bulk liquid depth and inlet/outlet elevation. The collection rate depends strongly on inlet/outlet elevation and bulk liquid pool depth, and for high ethanol mole fractions is nearly independent of bulk liquid composition. Enrichment and collection rate increase with increasing bulk liquid temperature and decreasing collection temperature. The fact that increasing the carrier-gas flow rate increases the collection rate and decreases enrichment is interpreted in terms of size-selective transport of drops from the ultrasonically-generated fountain where they are atomized, to the cold trap where they are collected. The results are discussed in terms of operating parameters, transport phenomena (including evaporation and gravitational settling of atomized drops), the ultrasonically-induced fountain, and previously reported drop-size distributions. The duration of the experiments, conducted in batch, was such that the results should be relevant to both batch and continuous-flow operation. The work provides guidance and critical data for process scale-up.

Ultrasound description of the coelomic cavity of the axolotl (Ambystoma mexicanum) in a clinically healthy population: a pilot study

Axolotls (Ambystoma mexicanum) are extensively studied for their relevance in human medical research. Despite being critically endangered in the wild, they have gained popularity as household pets. Although they have been kept in captivity for over a century, detailed descriptions of their coelomic organ anatomy remain limited. Also, this species exhibits significant variations compared to other amphibians. Ultrasound is a non-invasive and painless medical imaging technique, ideally suited for investigating internal organs or structures. This study focused on describing the ultrasound appearance of the axolotl coelomic cavity. It details the identification, localization and parenchymal description of major organs in 28 neotenic axolotls using ultrasound frequencies ranging from 7 to 15 MHz. The accuracy of the results was validated by comparing ultrasound findings with necropsy results from one male and one female axolotl. The heart, lung surface, liver and reproductive tracts were visualized. Measurements, along with confidence intervals, were calculated for the spleen, kidneys, testicles, gastric wall, gallbladder, and pylorus. Occasional detection of hyperechoic millimetric particles in the gallbladder or ascites was noted. However, visualization of the pancreas and bladder was not possible. This research outcomes involve the development of a comprehensive atlas comprising images obtained throughout the study. Additionally, the experiment established a reproducible and readily accessible protocol for conducting anatomy-morphological assessments in axolotl medicine. This protocol stands as a crucial preliminary stage before advancing to lesion identification.

Understanding the effects of microbubble concentration on localization accuracy in super-resolution ultrasound imaging.

Super-resolution ultrasound (SRUS) through localising and tracking of microbubbles (MBs) can achieve sub-wavelength resolution for imaging microvascular structure and flow dynamics in deep tissuein vivo. The technique assumes that signals from individual MBs can be isolated and localised accurately, but this assumption starts to break down when the MB concentration increases and the signals from neighbouring MBs start to interfere. The aim of this study is to gain understanding of the effect of MB-MB distance on ultrasound images and their localisation. Ultrasound images of two MBs approaching each other were synthesised by simulating both ultrasound field propagation and nonlinear MB dynamics. Besides the distance between MBs, a range of other influencing factors including MB size, ultrasound frequency, transmit pulse sequence, pulse amplitude and localisation methods were studied. The results show that as two MBs approach each other, the interference fringes can lead to significant and oscillating localisation errors, which are affected by both the MB and imaging parameters. When modelling a clinical linear array probe operating at 6 MHz, localisation errors between 20 and 30μm (∼1/10 wavelength) can be generated when MBs are ∼500μm (2 wavelengths or ∼1.7 times the point spread function (PSF)) away from each other. When modelling a cardiac probe operating at 1.5 MHz, the localisation errors were as high as 200μm (∼1/5 wavelength) even when the MBs were more than 10 wavelengths apart (2.9 times the PSF). For both frequencies, at smaller separation distances, the two MBs were misinterpreted as one MB located in between the two true positions. Cross-correlation or Gaussian fitting methods were found to generate slightly smaller localisation errors than centroiding. In conclusion, caution should be taken when generating and interpreting SRUS images obtained using high agent concentration with MBs separated by less than 1.7 to 3 times the PSF, as significant localisation errors can be generated due to interference between neighbouring MBs.

Omega-3 alleviates behavioral and molecular changes in a mouse model of stress-induced juvenile depression

IntroductionDepression is increasingly diagnosed in adolescence, necessitating specific prevention and treatment methods. However, there is a lack of animal models mimicking juvenile depression. This study explores a novel model using ultrasound (US) stress in juvenile mice. MethodsWe employed the US stress model in one-month-old C57/BL6 mice, exposing them to alternating ultrasound frequencies (20–25 kHz and 25–45 kHz) for three weeks. These frequencies correspond to negative and neutral emotional states in rodents and can induce a depressive-like syndrome. Concurrently, mice received either an omega-3 food supplement (FS) containing eicosapentaenoic acid (EPA; 0.55 mg/kg/day) and docosahexaenoic acid (DHA; 0.55 mg/kg/day) or a vehicle. Post-stress, we evaluated anxiety- and depressive-like behaviors, blood corticosterone levels, brain expression of pro-inflammatory cytokines, and conducted metabolome analysis of brain, liver and blood plasma. ResultsUS-exposed mice treated with vehicle exhibited decreased sucrose preference, a sign of anhedonia, a key feature of depression, increased anxiety-like behavior, elevated corticosterone levels, and enhanced TNF and IL-1β gene expression in the brain. In contrast, US-FS mice did not display these changes. Omega-3 supplementation also reduced anxiety-like behavior in non-stressed mice. Metabolomic analysis revealed US-induced changes in brain energy metabolism, with FS increasing brain sphingomyelin. Liver metabolism was affected by both US and FS, while plasma metabolome changes were exclusive to FS. Brain glucose levels correlated positively with activity in anxiety tests. ConclusionChronic omega-3 intake counteracted depressive- and anxiety-like behaviors in a US model of juvenile depression in mice. These effects likely stem from the anti-inflammatory properties of the supplement, suggesting potential therapeutic applications in juvenile depression.

Numerical modeling of ultrasound-triggered microneedle-mediated delivery of drug particles into bacterial biofilms

Ultrasonic microneedle patches, a class of ultrasound-driven transdermal drug delivery systems, are promising in addressing bacterial biofilms. This device has been proven to be more effective in treating Staphylococcus aureus biofilms than drug in free solution. However, there exists a notable gap in understanding how various excitation conditions and material parameters affect drug delivery efficiency. This study aims to fill this void by conducting an comprehensive multi-physics numerical analysis of ultrasonic microneedle patches, with the ultimate goal of enhancing drug delivery. First, we investigate the impact of various ultrasound frequencies on drug penetration depths. The findings reveal that local resonance can accelerate drug release within a shorter time window (first 1.5 h), whereas non-resonant frequencies enable more profound and prolonged diffusion. This information is crucial for medical professionals in selecting the most effective frequency for optimal drug administration. Furthermore, our investigation extends to the effects of applied voltage on temperature distribution, a critical aspect for ensuring medical safety during the application of these patches. Additionally, we examine how particles of different sizes respond to acoustic pressure and streaming fields, providing valuable insights for tailoring drug delivery strategies to specific therapeutic needs. Overall, our findings offer comprehensive guidelines for the effective use of ultrasonic microneedle patches, potentially shifting the paradigm in patient care and enhancing the overall quality of life.

Investigating the impact of ultrasound on the structural, physicochemical, and emulsifying characteristics of Dioscorin: Insights from experimental data and molecular dynamics simulation

This study investigated the impact of ultrasound treatment on dioscorin, the primary storage protein found in yam tubers. Three key factors, namely ultrasound power, duration, and frequency, were focused on. The research revealed that ultrasound-induced cavitation effects disrupted non-covalent bonds, resulting in a reduction in α-helix and β-sheet contents, decreased thermal stability, and a decrease in the apparent hydrodynamic diameter (Dh) of dioscorin. Additionally, previously hidden amino acid groups within the molecule became exposed on its surface, resulting in increased surface hydrophobicity (Ho) and zeta-potential. Under specific ultrasound conditions (200 W, 25 kHz, 30 min), Dh decreased while Ho increased, facilitating the adsorption of dioscorin molecules onto the oil-water interface. Molecular dynamics (MD) simulations showed that at lower frequencies and pressures, the structural flexibility of dioscorin's main chain atoms increased, leading to more significant fluctuations between amino acid residues. This transformation improved dioscorin's emulsifying properties and its oil-water interface affinity.

Optimal treatment conditions for low-intensity pulsed ultrasound therapy for Alzheimer’s disease: applications from mice to humans

PurposeWe previously developed a novel therapy with low-intensity pulsed ultrasound (LIPUS) that ameliorates cognitive decline through upregulation of endothelial nitric oxide synthase (eNOS) in mouse models of Alzheimer’s disease (AD). In a randomized, double-blind, placebo-controlled pilot trial, we demonstrated that whole-brain LIPUS therapy is safe and tends to suppress the cognitive decline in early AD patients. We herein report the findings of our basic experiments that we performed for the pilot trial in order to apply whole-brain LIPUS therapy to humans, as well.MethodsFirst, we examined the relationship between bone density/thickness and ultrasound transmittance using human temporal bone. Next, based on the results of ultrasound transmittance, we further examined mRNA expression of VEGF, FGF2, and eNOS in response to variable ultrasound frequencies, duty cycles, and sound pressures.ResultsThere was a significant correlation between bone thickness and transmittance (1.0 MHz, P < 0.001), while there was no significant correlation between bone density and transmittance (1.0 MHz, P = 0.421). At a frequency of 0.5 MHz, the optimum duty cycle was considered to be up to 20%. When the tissue amplitude was in the range of 0.05–0.5 MPa, VEGF, FGF2, and eNOS were significantly upregulated by LIPUS. Thus, the conditions necessary for LIPUS therapy for the human brain were identified as sound pressure just below the probe 1.3 MPa (tissue amplitude 0.15 MPa), duty cycle 5%, and frequency 0.5 MHz.ConclusionWe successfully identified the optimal treatment conditions for LIPUS therapy for patients with AD.

Assessing the impact of ultrasound on the rate and extent of early post-mortem glycolysis in bovine Longissimus thoracis et lumborum

The rate of pH decline, early post-mortem, has been identified as a key factor that impacts the tenderness of meat, and manipulating this rate of pH decline is highly relevant to ensure consistent high quality meat. Ultrasound is a potential intervention in early post – mortem muscle that may have an impact on the rate of glycolysis through its ability to alter enzyme activity. Following a variety of different ultrasound treatments frequencies (25 and 45 kHz) and durations (15, 30 and 45 min), it was found, when analysed in muscle, that ultrasound treatment duration, specifically the 30 min treatment, and interaction between treatment duration and frequency, had a significant impact on the rate of pH decline, post – treatment. Frequency did not have a significant effect on the rate of pH decline, post – treatment, in muscle. Ultrasound did not have a significant permanent effect on the activity of glycolytic enzymes present in bovine Longissimus lumborum et thoracis muscle, where no significant differences were observed on the rate of pH decline and rate of change of reducing sugars, glycogen and lactic acid, when analysed in an in vitro glycolytic buffer. It seems that the impact observed in intact muscle is not as a consequence of a permanent change in enzymatic activity, instead indicating an impact on conditions in the muscle which enhanced enzyme activity.

Investigation on The Effect of Low Frequency Ultrasound on The Crystallization of a Pharmaceutical Compound L+ Ascorbic Acid

One of the most crucial processes in the chemical processing industry is crystallization, which has the major challenge of producing solid products with the required purity and properties. The standard crystallization methods have various processing limitations; hence, research into alternative methods like ultrasonic-assisted crystallization has been at the forefront. The present work investigates the application of low-frequency ultrasound irradiation (40 kHz) for improving the cooling crystallization of ascorbic acid. The impact of ultrasonic irradiation on crystal size, shape, and induction time has been studied, and a comparison with the conventional method has been made. The standing time had a minor effect on particle size on average, while the initial temperature had a far more significant impact. Photographic analysis using image-analysis software indicated that when ultrasound was applied to the saturated solutions, the resulting crystals were smaller and more uniform in size and shape. The resultant crystal grows predominantly in a single direction, resembling thin prisms. The use of ultrasound was also shown to reduce the induction time significantly. This ultrasonic impact is stronger at lower initial temperatures. Indeed, the smallest induction time of 300 s was obtained for sonicated solutions at an initial temperature of 65°C and ultrasonic power of 250 w. When different levels of ultrasonic power dissipation were tested, it was established that the time required for the first nuclei to appear decreased as the power increased. There was, nevertheless, a marginal impact on average crystal size.

Optimization of nano-emulsion production in ultrasonic microreactors: The effects of pre-homogenization, circulating ratio and hybrid frequency application

The study first investigated the effects of individual ultrasound and high-speed shearing on emulsification, both obtaining emulsions with average sizes of approximately 1 μm. Subsequently, a combined strategy to utilize shearing instrument producing coarse emulsion for ultrasonic microreactor was proposed. Immiscible liquids were drawn into the stirring chamber by rotating paddles, where they underwent strong shearing and thorough mixing. The pre-mixed liquids were introduced into microchannel and subjected to further processing by oscillating cavitation bubbles. Through optimization of experimental parameters such as residence time and recycle ratio, the average emulsion size was significantly reduced to 522 nm. Finally, a dual-frequency strategy using ultrasound frequencies of 20 and 40 kHz consecutively further reduced the emulsion size to 307 nm. In comparison with conventional sonoreactors and high-pressure homogenizers, this dual-frequency approach demonstrated superior emulsification performance with less surfactant addition and energy input, indicating its high applicability on continuous emulsification process with proper design and optimization.