Frequency Dependence Research Articles

Manganite Heterostructures: SrIrO<sub>3</sub>/La<sub>0.7</sub>Sr<sub>0.3</sub>MnO<sub>3</sub> and Pt/La<sub>0.7</sub>Sr<sub>0.3</sub>MnO<sub>3</sub> for Generation and Registration of Spin Current

This paper presents the results of experimental studies of the cross section of the boundaries of the SrIrO3/La0.7Sr0.3MnO3 и Pt/La0.7Sr0.3MnO3, heterostructures, in which, upon excitation of ferromagnetic resonance in a La0.7Sr0.3MnO3 film, a spin current arises that flows through the boundary in structure. Epitaxial growth of thin films of strontium iridate SrIrO3 and manganite La0.7Sr0.3MnO3 on a (110) NdGaO3 single-crystal substrate was carried out using magnetron sputtering at high temperature in a mixture of argon and oxygen gases. The spin mixing conductance, which determines the amplitude of the spin current and generally has real Re g↑↓ and imaginary Im g↑↓ parts, was determined from the frequency dependence of the FMR spectrum of the LSMO film and heterostructures. It is shown that the Im g↑↓ quantity, can play an important role in determining the spin Hall angle (θSH) from the angular dependence of the spin magnetoresistance. For the SrIrO3/La0.7Sr0.3MnO3 heterostructures, θSH turned out to be significantly higher (almost an order of magnitude) than for the Pt/La0.7Sr0.3MnO3 heterostructure.

Two-dimensional acoustic analysis using Taylor expansion-based boundary element method

The use of boundary elements in two-dimensional acoustic analysis is presented in this study, along with a detailed explanation of how to derive the final discrete equations from the fundamental fluctuation equations. In order to overcome the fictitious eigenfrequency problem that might arise during the examination of the external sound field, this work employs the Burton-Miller approach. Additionally, this work uses the Taylor expansion to extract the frequency-dependent component from the BEM function, which speeds up the computation and removes the frequency dependency of the system coefficient matrix. The effect of the radiated acoustic field generated by underwater structures’ on thin-walled structures such as submarines and ships is inspected in this work. Numerical examples verify the accuracy of the proposed method and the efficiency improvement.

Electric and dielectric responses of Au/n-Si structure by Mn doped PVC interfacial layers

This paper has investigated and compared the impact of polyvinyl chloride (PVC) without/with manganese (Mn) metallic nanoparticles interfacial layer on the electric and impedance characteristics of Schottky diode (SD) with a structure of Au/n-Si (MS). The structures of these two metal-polymer-semiconductor (MPS) SDs are Au/PVC/n-Si and Au/PVC:Mn/n-Si. A detailed description of the SDs manufacturing process is given. The x-ray diffraction (XRD) analysis, Scanning Electron Microscope (FE-SEM) images, and Electron Dispersive x-ray (EDX) spectroscopy are three methods that have been utilized to examine mean size of crystallite, morphology of surface, purity specification. The fundamental electronic variables of these devices are ascertained and contrasted with one another using the I-V characteristic measurement at ±6 V. Ohm’s law, Thermionic Emission (TE) theory, modified Norde, and Cheung functions are used to calculate the SDs’ leakage current (I0), ideality coefficient (n), potential barrier height (BH), shunt (Rsh), and series (Rs) resistances. Investigations are conducted on the energy dependence of surface states density (Nss) and the current conduction mechanisms (CCMs) for both reverse and forward biases. These interfacial layers are known to decrease the n, Rs, and Nss. The PVC polymer interlayer leads to improve the efficiency of the MS-type SD, but it does not when doped by Mn nanoparticles. Additionally, by measuring impedance at a bias of 1.5 V and 100 Hz-1 MHz frequency range, the frequency dependence of dielectric properties of the prepared SDs is studied. The dielectric permittivity, dielectric loss tangent, electronic modulus, and ac electronic conductivity of these SDs are all studied.

Ultra-sensitive, graphene metasurface sensor integrated with the nonradiative anapole mode for detecting and differentiating two preservatives

Abstract Graphene-based metamaterial sensors are of significant research value for detecting food preservatives at low concentrations due to their extremely high sensitivity levels. In this work, we proposed and experimentally demonstrated an anapole resonance-based graphene metasurface (An-graphene-Ms) sensor with its conductivity altered by electrostatic doping effects for detecting and differentiating between two preservatives, sodium benzoate and potassium sorbate, in the terahertz region. Sodium benzoate, owing to its benzene ring structure, established π–π stacking interactions between the π-electrons in the benzene ring and those in graphene, amplifying the sensing effect. The amplitude changes and phase differences of the An-graphene-Ms sensor for the sodium benzoate detection were greater than those for potassium sorbate at the same concentration. Additionally, to reveal the dependence of the resonance frequency on the time delay, the measured signals were investigated using the continuous wavelet transform (CWT), and the time-frequency combination of the metasurface sensor was performed. The 2D wavelet coefficient intensity cards are effectively constructed through CWT, which also presents a more accurate approach for distinguishing and determining the concentrations of the two preservatives.

Frequency dependence of soft error rates induced by alpha-particle and heavy ion

Frequency dependence of soft error rates induced by alpha-particle and heavy ion

Exploring the structural characteristics and electrical conductivity of MnTiO3 across ferroelectric and paraelectric phases

In this study, we present the ceramic's structural, dielectric, and impedance characteristics obtained through the solid-state reaction method synthesis. Initial structural analysis was conducted utilizing X-ray diffraction at room temperature. The XRD results show that MnTiO3 exhibits rhombohedral symmetry. SEM images of MnTiO3 show the presence of both cubic and large agglomerated grains. This demonstrates the effectiveness of the dielectric HN model in controlling the mechanism. The alternating current (ac) conductivity, when examined in relation to frequency, displays a remarkable adherence to the Johnscher's power law. The change in electrical modulus and the width at half maximum (FWHM) of the curve indicate that the as-prepared sample exhibits a non-Debye relaxation mechanism. Both the temperature data and the frequency dependence of the impedance were used to analyze the electrical conductivity of the sample, which showed a negative temperature coefficient resistance (NTCR).

Optical fibers with a frequency-dependent Kerr nonlinearity: Theory and applications

This review provides a detailed discussion of both the mathematical treatment and the impact of a frequency-dependent Kerr nonlinearity on the propagation of short pulses in optical fibers. We revisit the theoretical framework required to deal with the frequency dependence of the nonlinear response without incurring any physical inconsistencies, such as the non-conservation of the photon number. Then, we point out the role of the zero-nonlinearity wavelength, its interplay with the zero-dispersion wavelength, and their influence on evolution of optical pulses in optical fibers, specifically by looking at soliton propagation and the ensuing generation of Cherenkov radiation. Finally, by means of a space–time analogy involving the collision of a weak control pulse and an intense soliton, we describe an all-optical switching scheme in the presence of a zero-nonlinearity wavelength within a photon-conserving framework.

Ternary cesium(rubidium) tungstates: production and impedance spectroscopy

The work is aimed at the directed synthesis of new phases of tungstates containing mono-, tri-, and tetravalent metals, as well as the determination of their crystallographic, thermal, and electrophysical properties. The study used the method of solid-phase synthesis to obtain tungstate phases with composition MRA0.5(WO4)3 (M – singly, R – triply-, and A – tetra-charged elements) within the temperature range of 400–750 °С. Their crystallographic and thermal characteristics were determined. The synthesized ternary tungstates crystallizing in a hexagonal system were studied using differential scanning calorimetry. The technique revealed an increase in the melting temperatures of compounds with increasing ionic radius of the trivalent cation in the series CsRTi0.5(WO4)3 (R = Al, Cr, Ga, Fe, In). The same correlation is observed when switching from rubidium to cesium derivatives. The thermal stability of ternary titanium and hafnium tungstates was compared. The melting temperatures of RbRTi0.5(WO4)3 are about 20 °С higher than those of their hafnium counterparts. The dielectric characteristics of CsRTi0.5(WO4)3 (R = Fe, Cr) belonging to the ternary tungstate family were analyzed via impedance spectroscopy. The temperature and frequency dependences of the conductivity of ternary tungstates at different frequencies (1 Hz – 1 mHz), measured in heating and cooling modes, are characterized by a slight temperature hysteresis, reaching 10-2–10-3 S/cm in the high-temperature region at activation energy values of 0.4–0.5 eV. The impedance frequency spectra measured within the range of 1 Hz – 1 mHz at different temperatures confirm the ion-conducting properties of the sample, which allows the obtained phases to be considered promising solid electrolytes.

Identification of water transitions using a combination of moisture sorption characteristics and dielectric properties of different parts of jasmine rice (Oryza sativa).

In this work, water transition points (first transition: monolayer-multilayer water; and second transition: multilayer-free and solvent water) of different parts of jasmine rice including white rice, brown rice and bran were identified through the integration of sorption isotherm and dielectric properties data. Desorption isotherm data were fitted to four established models to select the optimal model for describing the sorption behaviors. Then, dielectric properties such as dielectric constant (ε') and dielectric loss factor (ε″) were measured across various moisture content levels within the frequency range of 200-20 000 MHz. A type III isotherm was observed for all samples and the Peleg model was the best fit with the experimental data. Monolayer moisture content of the samples, estimated using the GAB model, ranged from 3.25% to 4.17% dry basis. For dielectric properties, frequency and moisture dependencies were evident for all sample types. Moreover, the sorption isotherm models effectively described the relationship between water activity (aw) and dielectric properties as reflected by their goodness of fit, and their strong correlation through principal component analysis and Pearson's correlation results. The first water transition occurs at aw values of 0.11, 0.12, and 0.22, while the second transition appears at aw values of 0.9, 0.9 and 0.75-0.85 for white rice, brown rice and bran, respectively. This knowledge will be useful for food processors, providing insights into the optimization of food processing and storage conditions to extend food products' shelf life. © 2024 Society of Chemical Industry.

Interspecific difference and frequency dependence in habitat use of coexisting Ohomopterus ground beetle species under reproductive interference

Interspecific difference and frequency dependence in habitat use of coexisting <i>Ohomopterus</i> ground beetle species under reproductive interference

A modified linear-elastic model for calibration of resonant column devices accommodating drive system compliance

Measurements of small-strain shear modulus of soils and rocks using the resonant column apparatus are highly dependent on accurate physical characterisation of the apparatus's drive components. This is typically achieved by way of a calibration exercise, yet it is widely reported that existing interpretation methods yield physical properties that vary with frequency, complicating subsequent interpretation of test data. Previous research has indicated that much of this apparent frequency dependency occurs due to compliance of the drive system. In this study the linear elastic model of the resonant column apparatus is adapted to include a new drive stiffness parameter, supported by finite-element analysis of the drive system. A novel calibration method is presented based on this drive compliance model. Thirteen calibration bars and three added masses are used to conduct an extensive calibration exercise for both a Hardin- and Stokoe-type resonant column apparatus. The novel calibration method is compared with three existing methods in the literature. Limitations of the four methods are identified and discussed. The drive compliance model and its associated calibration method is shown to be a robust means of characterising the apparatus behaviour while successfully eliminating frequency dependency of the calibration parameters. The model is valid where total system damping is small and is particularly valuable when testing stiff specimens where common apparatus assumptions may not apply.

Switching Dynamics and Improved Efficiency of Free‐Standing Antiferroelectric Capacitors

AbstractThe switching dynamics of antiferroelectric lead zirconate (PbZrO3) freestanding capacitors compared to their epitaxial counterparts is reported. Frequency dependence of hysteresis indicates that freestanding capacitors exhibit a lower dispersion of switching fields, lower residual polarization, and faster switching response as compared to epitaxially‐clamped capacitors. As a consequence, freestanding capacitor membranes exhibit better energy storage density and efficiency.

Magnetic anisotropy and GGG substrate stray field in YIG films down to millikelvin temperatures

Quantum magnonics investigates the quantum-mechanical properties of magnons, such as quantum coherence or entanglement for solid-state quantum information technologies at the nanoscale. The most promising material for quantum magnonics is the ferrimagnetic yttrium iron garnet (YIG), which hosts magnons with the longest lifetimes. YIG films of the highest quality are grown on a paramagnetic gadolinium gallium garnet (GGG) substrate. The literature has reported that ferromagnetic resonance (FMR) frequencies of YIG/GGG decrease at temperatures below 50 K despite the increase in YIG magnetization. We investigated a 97 nm-thick YIG film grown on 500 μm-thick GGG substrate through a series of experiments conducted at temperatures as low as 30 mK, and using both analytical and numerical methods. Our findings suggest that the primary factor contributing to the FMR frequency shift is the stray magnetic field created by the partially magnetized GGG substrate. This stray field is antiparallel to the applied external field and is highly inhomogeneous, reaching up to 40 mT in the center of the sample. At temperatures below 500 mK, the GGG field exhibits a saturation that cannot be described by the standard Brillouin function for a paramagnet. Including the calculated GGG field in the analysis of the FMR frequency versus temperature dependence allowed the determination of the cubic and uniaxial anisotropies. We find that the total crystallographic anisotropy increases more than three times with the decrease in temperature down to 2 K. Our findings enable accurate predictions of the YIG/GGG magnetic systems behavior at low and ultralow millikelvin temperatures, crucial for developing quantum magnonic devices.

Полосковый резонатор СВЧ с объемным кристаллом: экспериментальные характеристики и определение эффективной диэлектрической проницаемости

The paper presents the results of an experimental study and modeling of the frequency characteristics of a resonator in the form of two strip vibrators, separated by a large gap and covered with a bulk lithium niobate crystal. A metal electrode with a floating potential is installed on the upper surface of the crystal. The frequency dependences of the scattering matrix coefficients of a stripline resonator were measured in the frequency range up to 3 GHz. Electrodynamic analysis was carried out in the COMSOL Multiphysics numerical simulation environment. A comparison was made of experimental and numerical results, which showed good qualitative agreement between the transmission coefficients and reflection coefficients. Resonant oscillations were obtained at two or three frequencies depending on the location and orientation of the crystal. It has been established that at the first resonant frequency the electrode acts as a screen. The absence of an electrode leads to the disappearance of resonance. The simulation carried out in COMSOL made it possible to estimate the effective dielectric constant of the resonator corresponding to the values of the resonant frequencies. The calculation of electromagnetic fields made it possible to establish the types of waves corresponding to resonant frequencies. Knowing the type of waves and estimating the relative dielectric constant made it possible to construct an algorithm for a refined iterative procedure for calculating the values of the resonant frequencies and the effective dielectric constant of the resonator. The possibility of using resonators as single-link bandpass filters with a passband of about 1%, insertion loss of –1.1 dB and minimal return loss of –28 dB at the center frequency is shown.

Ultra‐Low Velocity Zone Beneath the Atlantic Near St. Helena

AbstractThere are various hotspots in the Atlantic Ocean, which are underlain by mantle plumes that likely cross the mantle and originate at the core‐mantle boundary. We use teleseismic core‐diffracted shear waves to look for an Ultra‐Low Velocity Zone (ULVZ) at the potential base of central Atlantic mantle plumes. Our data set shows delayed postcursory phases after the core‐diffracted shear waves. The observed patterns are consistent in frequency dependence, delay time, and scatter pattern with those caused by mega‐ULVZs previously modeled elsewhere. Synthetic modeling of a cylindrical structure on the core‐mantle boundary below St. Helena provides a good fit to the data. The preferred model is 600 km across and 20 km high, centered at approximately 15° South, 15° West, and with a 30% S‐wave velocity reduction. Significant uncertainties and trade‐offs do remain to these parameters, but a large ULVZ is needed to explain the data. The location is west of St. Helena and south of Ascension. Helium and neon isotopic systematics observed in samples from this region could point to a less‐outgassed mantle component mixed in with the dominant signature of recycled material. These observations could be explained by a contribution from the Large Low Shear Velocity Province (LLSVP). Tungsten isotopic measurements would be needed to understand whether a contribution from the mega‐ULVZ is also required at St. Helena or Ascension.

Resonance frequency band structure in heterojunction of one-dimension string-ball chain system

Using the concept of heterostructures in semiconductor physics and the similarity between the Schrödinger equation and the vibration equation of the one-dimension string-ball chain system, we create a heterojunction in our string-ball chain system by assembling a string-ball chain with two kinds of mass in a lattice-matched and an unmatched system and study the two systems through first-principle calculation, theoretical analysis, and experiment perspectives. A discontinuity in the frequency dependence is observed in the matched system, while a phase transition is discovered in the unmatched system. A proper theoretical analysis based on the wave function is also given to explain these phenomena.

The Influence of Space Traffic on AIM/CIPS PMC Frequencies at 80°N

AbstractWe explore the effects of lower thermospheric water vapor deposited by launch vehicle plumes on polar mesospheric cloud (PMC) frequencies at 80°N. We use July‐averaged PMC frequencies from 2007 to 2022 from the Cloud Imaging and Particle Size (CIPS) instrument on NASA's Aeronomy of Ice in the Mesosphere (AIM) satellite. Launch sites worldwide are typically located near northern mid‐latitudes. Using the orbital launch record for the same time period, we find that the number of launches correlates with PMC frequencies with a coefficient of r = 0.60, which increases to r = 0.75 when only selecting launches from 2.5 to 21.5 local time (LT), indicating a weak LT dependence on global‐scale transport to 80°N. To support our findings, we use meridional winds from the Michelson Interferometer for Global High‐resolution Imaging experiment on NASA's Ionospheric Connection Explorer satellite and winds from the Horizontal Wind Model climatology to interpret the northward motion of air parcels at 105 km. We find the launch LT window that maximizes the correlation coefficient to be consistent with the expected maximum northward motion from the diurnal variation of mid‐latitude meridional winds. Comparisons with Microwave Limb Sounder satellite observations of upper mesospheric temperature and water vapor reveal a strong dependence of cloud frequency on water vapor (r = 0.86) but not on temperature (r = −0.26), indicating that water vapor is the primary source of PMC variability for the bright PMCs at 80°N. We therefore find that launch vehicle plumes originating primarily from northern mid‐latitudes modulate PMC frequency at 80°N in July.

Opacity and frequency dependence of beta

This paper examines the relationship between opacity and frequency dependence of systematic risk (β), estimated over different horizons using Wavelet Transform, for small and large firms. The findings provide evidence for the frequency-specific nature of opacity and suggest that while opacity is positively related to the frequency dependence of beta for large firms at all frequencies, for small firms the relationship is significant at low (long horizon) and insignificant at higher (short horizon) frequencies.

Structural arrangement, electroconductivical and electrochemical behaviours of solid amino acid-based electrodes

This paper presents the study on the structural dependence of the electroconductivity and electrochemical activity of model amino acids, aspartate and glycine, which are used as solid electrodes in hybrid capacitor systems. It has been established that the presence of carbonyl, aliphatic, and amide functional groups on the surface enhances the electrochemical activity and electrical conductivity. The frequency dependence of conductivity is typical for polymer compounds with a proton conduction mechanism, which is provided by the surface migration of the charge. It was found that deposition on the surface of carbon templates of the amino acids in the formation of biocomposites increases the number of active reaction centers and provides effective electronic charge transport. As a result, it leads to a significant increase in the contribution of pseudocapacitance and capacitance processes. The electrochemical activity was caused by the pseudocapacitive accumulation of charge due to the course of redox reactions with amino acids and capacitive accumulation of charge, which occurs with the participation of amino acids and carbon templates. It has been proven that the porous structure of the carbon nanotubes provides a more dispersed and uniform distribution of amino acids on the surface, which is ensured in the growth of pseudocapacitive charge accumulation.

The impacts of spin–orbit coupling and strain on transverse dynamical spin susceptibility in undoped phosphorene: Kane–Mele model study

We present the behaviors of dynamical transverse spin susceptibilities of undoped phosphorene monolayer using the Green’s function approach in the context of Kane–Mele model Hamiltonian. Such dynamical spin susceptibility is proportional to inelastic cross section of neutron beam from the layer. Specially, the effects of magnetic field and spin–orbit coupling strength on the spin excitation modes of phosphorene monolayer are investigated via calculating correlation function of spin density operators. Our results show the increase of magnetic field leads to move the magnetic excitation energy to higher values. Also, the intensity of peaks in inelastic cross section reduces with increase of magnetic field. We also show that applying both uniaxial and biaxial strains causes to decrease the intensity of peaks in dynamical spin susceptibility. Finally the effects of both compressive and tensile strains on frequency dependence of dynamical spin structure factor of phosphorene layer are studied. Moreover, the frequency positions of spin excitation mode of phosphorene layer have been investigated due to the effects of spin orbit coupling strength in details.