Formation Of Cross-links Research Articles

Porphyrin derivatives inhibit tumor necrosis factor α-induced gene expression and reduce the expression and increase the cross-linked forms of cellular components of the nuclear factor κB signaling pathway

The transcription factor nuclear factor κB (NF-κB) is activated by proinflammatory cytokines, such as tumor necrosis factor α (TNF-α) and Toll-like receptor (TLR) ligands. Screening of NPDepo chemical libraries identified porphyrin derivatives as anti-inflammatory compounds that strongly inhibited the up-regulation of intercellular adhesion molecule-1 (ICAM-1) expression induced by TNF-α, interleukin-1α, the TLR3 ligand, and TLR4 ligand in human umbilical vein endothelial cells. In the present study, the mechanisms of action of porphyrin derivatives were further elucidated using human lung adenocarcinoma A549 cells. Porphyrin derivatives, i.e., dimethyl-2,7,12,18-tetramethyl-3,8-di(1-methoxyethyl)-21H,23H-porphine-13,17-dipropionate (1) and pheophorbide a (2), inhibited TNF-α-induced ICAM-1 expression and decreased the TNF-α-induced transcription of ICAM-1, vascular cell adhesion molecule-1, and E-selectin genes. 1 and 2 reduced the expression of the NF-κB subunit RelA protein for 1 h, which was not rescued by the inhibition of proteasome- and lysosome-dependent protein degradation. In addition, 1 and 2 decreased the expression of multiple components of the TNF receptor 1 complex, and this was accompanied by the appearance of their cross-linked forms. As common components of the NF-κB signaling pathway, 1 and 2 also cross-linked the α, β, and γ subunits of the inhibitor of NF-κB kinase complex and the NF-κB subunits RelA and p50. Cellular protein synthesis was prevented by 2, but not by 1. Therefore, the present results indicate that porphyrin derivative 1 reduced the expression and increased the cross-linked forms of cellular components required for the NF-κB signaling pathway without affecting global protein synthesis.

Effect of Chemical Composition of Metal-Organic Crosslinker on the Properties of Fracturing Fluid in High-Temperature Reservoir.

To investigate the effect of the chemical composition of a metal-organic crosslinker on the performances of fracturing fluid in high-temperature conditions, four zirconium (Zr) crosslinkers and one aluminum-zirconium (Al-Zr) crosslinker with a polyacrylamide were used. The crosslinkers possessed the same Zr concentration, but they differed in component amounts and the order of the addition of the crosslinker components, leading to different chemical compositions in the crosslinkers. The fracturing fluids prepared by different tested crosslinkers were compared in terms of properties of rheological behavior, sand-carrying ability, microstructure, and gel breaking characteristics. The results showed that the fracturing fluids prepared by zirconium lactic acid, ethanediamine, and sorbitol crosslinkers offered the slowest viscosity development and highest final viscosity compared to the zirconium lactic acid crosslinker and the zirconium lactic acid and ethanediamine crosslinker. The zirconium sorbitol, lactic acid, and ethanediamine crosslinker exhibited a faster crosslinking rate and a higher final viscosity than the zirconium lactic acid, ethanediamine, and sorbitol crosslinker; the crosslinker showed crosslinking density and crosslinking reactivity, resulting in more crosslinking sites and a higher strength in the fracturing fluid. The Al-Zr-based crosslinker possessed better properties in temperature and shear resistance, viscoelasticity, shear recovery, and sand-carrying ability than the Zr-based crosslinker due to the synergistic crosslinking effect of aluminum and zirconium ions. The tertiary release gelation mechanism of the Al-Zr-based fracturing fluid achieved a temperature resistance performance in the form of continuous crosslinking, avoiding the excessive crosslinking dehydration and reducing viscosity loss caused by early shear damage. These results indicated that the chemical compositions of metal-organic crosslinkers were important factors in determining the properties of fracturing fluids. Therefore, the appropriate type of crosslinker could save costs without adding the additional components required for high-temperature reservoirs.

Synthesis of polyethylene-based covalent adaptable networks including 1,2,3-triazolium or imine dynamic cross-links by reactive processing

Polyethylene-based covalent adaptable networks (PE CANs) are obtained by reactive extrusion in a micro-compounder of a commercial maleic anhydride-grafted polyethylene (PE-g-MA) with two tailor-made α,ω-diamine cross-linkers carrying either imine or 1,2,3-triazolium groups as dissociative covalent dynamic bonds. Depending on the chemical nature of the exchangeable bonds, drastically different properties are demonstrated by FTIR, swelling/extractible, reactive dissolution and rheological experiments. The imine-containing PE CAN yields a high gel fraction but rheology and reactive dissolution experiments demonstrate the lack of dynamicity due to side-reactions promoting the formation of non-dynamic covalent cross-links. Such undesirable reaction occurs already during the processing stage from the premature cleavage of the imine bonds into amines, and further formation of permanent imide cross-links by reaction with pendent maleic anhydrides. Conversely, the 1,2,3-triazolium-containing PE CAN presents a lower gel fraction but exhibits viscoelastic properties typical of dissociative CANs. While this material is easily reprocessable by compression moulding, the evolution of the rheological properties at high temperatures (160–200 °C) points toward the occurrence of side reactions slowing down the relaxation dynamics which we attribute to the chemical rearrangement of the 1,2,3-triazolium cross-links. These two examples illustrate the difficulty of using amine-functionalized dynamic cross-links in the synthesis of PE CANs by reactive extrusion using PE-g-MA.

Dynamics of collagen oxidation and cross linking in regenerating and irreversibly infarcted myocardium

In mammalian hearts myocardial infarction produces a permanent collagen-rich scar. Conversely, in zebrafish a collagen-rich scar forms but is completely resorbed as the myocardium regenerates. The formation of cross-links in collagen hinders its degradation but cross-linking has not been well characterized in zebrafish hearts. Here, a library of fluorescent probes to quantify collagen oxidation, the first step in collagen cross-link (CCL) formation, was developed. Myocardial injury in mice or zebrafish resulted in similar dynamics of collagen oxidation in the myocardium in the first month after injury. However, during this time, mature CCLs such as pyridinoline and deoxypyridinoline developed in the murine infarcts but not in the zebrafish hearts. High levels of newly oxidized collagen were still seen in murine scars with mature CCLs. These data suggest that fibrogenesis remains dynamic, even in mature scars, and that the absence of mature CCLs in zebrafish hearts may facilitate their ability to regenerate.

Clusterization-triggered emission of polysaccharide-based microclusters induced by the co-assembly of chitosan nanofibers and dialdehyde carboxymethyl cellulose

Abstract The emerging nonaromatic and nonconjugated clusteroluminogens possess the potential to overcome the common drawbacks of aromatic π-conjugated luminophores such as aggregation-caused quenching, synthetic complexity, bio-toxicity, and environmental pollution. Because of the presence of heteroatoms and carbonyl functional groups, some natural polymers show potential as clusteroluminogens. In this study, co-assembled microclusters were fabricated using chitosan nanofibers cross-linked with dialdehyde carboxymethyl cellulose. Microclusters form stable structures under aqueous conditions owing to the formation of cross-links via imine bonds, ionic interactions, and hydrogen bonds between the polysaccharides. These multiple interactions and the heteroatomic nature of both chitosan nanofibers and dialdehyde carboxymethyl cellulose enable the realization of clusterization-triggered emission by through-space conjugation. Microclusters exhibit stable fluorescence behavior under aqueous conditions. A composite gel of microclusters and poly(vinyl alcohol) (PVA-MCs) was synthesized using the freeze–thaw method to develop clusterization-triggered emission hydrogel. The microclusters and PVA-MCs gels demonstrated the detection ability toward specific metal ions such as Cu2+ and Fe3+, by the quenching of the emission. This strategy for the creation of clusterization-triggered emission microclusters based on cross-linked polysaccharides widens the scope of the practical and sustainable application of water-containing fluorescent materials in the fields of sensing and biomedicines.

Mechanism of Action of KL-50, a Candidate Imidazotetrazine for the Treatment of Drug-Resistant Brain Cancers.

Aberrant DNA repair is a hallmark of cancer, and many tumors display reduced DNA repair capacities that sensitize them to genotoxins. Here, we demonstrate that the differential DNA repair capacities of healthy and transformed tissue may be exploited to obtain highly selective chemotherapies. We show that the novel N3-(2-fluoroethyl)imidazotetrazine "KL-50" is a selective toxin toward tumors that lack the DNA repair protein O6-methylguanine-DNA-methyltransferase (MGMT), which reverses the formation of O6-alkylguanine lesions. We establish that KL-50 generates DNA interstrand cross-links (ICLs) by a multistep process comprising DNA alkylation to generate an O6-(2-fluoroethyl)guanine (O6FEtG) lesion, slow unimolecular displacement of fluoride to form an N1,O6-ethanoguanine (N1,O6EtG) intermediate, and ring-opening by the adjacent cytidine. The slow rate of N1,O6EtG formation allows healthy cells expressing MGMT to reverse the initial O6FEtG lesion before it evolves to N1,O6EtG, thereby suppressing the formation of toxic DNA-MGMT cross-links and reducing the amount of DNA ICLs generated in healthy cells. In contrast, O6-(2-chloroethyl)guanine lesions produced by agents such as lomustine and the N3-(2-chloroethyl)imidazotetrazine mitozolomide rapidly evolve to N1,O6EtG, resulting in the formation of DNA-MGMT cross-links and DNA ICLs in healthy tissue. These studies suggest that careful consideration of the rates of chemical DNA modification and biochemical DNA repair may lead to the identification of other tumor-specific genotoxic agents.

Formation of Cysteine Adducts with Chlorogenic Acid in Coffee Beans.

The post-harvest processing of coffee beans leads to a wide range of reactions involving proteins. The formation of crosslinks between proteins and phenolic compounds present in high concentrations of coffee beans represents one of the most challenging and still not fully characterized reactions. The aim of this work was to assess the presence of products from such reactions in coffee samples, focusing on the adducts between cysteine and chlorogenic acids (CQAs). For this purpose, 19 green and 15 roasted coffee samples of the Coffea arabica, Coffea canephora, and Coffea liberica varieties were selected for this study and basically characterized. Then, targeted liquid chromatography mass spectrometry (LC-MS/MS) methods were developed to assess the formation of adducts between CQA and cysteine, glutathione, and N-acetylcysteine as the amino acid and peptide models, and quantified such adducts in coffee samples. The results of the characterization showed a heterogeneous distribution of the protein content (8.7-14.6%), caffeine (0.57-2.62 g/100 g), and antioxidant capacity (2-4.5 g ascorbic acid/100 g) in Arabica, Canephora, and Liberica samples. Glutamic acid, arginine, and proline were found to be the major amino acids, while 5-CQA (38-76%), 3-CQA (4-13%), and 4-CQA (4-13%) were the most abundant CQA derivatives of all coffee varieties. The model experiments for adduct formation demonstrated that cysteine binds to CQA via thiol groups and 5-CQA initially isomerizes to 3- and 4-CQA, depending on the conditions, allowing cysteine to bind to two different sites on 3-, 4- or 5-CQA molecules, thus, forming six different Cys-CQA adducts with m/z 476. The reaction was more favored at pH 9, and the adducts proved to be stable up to 90 °C for 10 min and up to 28 days at room temperature. The relative quantification of adducts showed peak area values ranging from 1100 to 3000 in green coffee bean samples, while no adducts were detected in roasted coffee beans. Overall, this work was the first attempt to demonstrate the presence of Cys-CQA adducts in coffee beans and paves the way for further investigations of such adduct formation at the protein level.

LexA, an SOS response repressor, activates TGase synthesis in Streptomyces mobaraensis

Transglutaminase (EC 2.3.2.13, TGase), an enzyme that catalyzes the formation of covalent cross-links between protein or peptide molecules, plays a critical role in commercial food processing, medicine, and textiles. TGase from Streptomyces is the sole commercial enzyme preparation for cross-linking proteins. In this study, we revealed that the SOS response repressor protein LexA in Streptomyces mobaraensis not only triggers morphological development but also enhances TGase synthesis. The absence of lexA significantly diminished TGase production and sporulation. Although LexA does not bind directly to the promoter region of the TGase gene, it indirectly stimulates transcription of the tga gene, which encodes TGase. Furthermore, LexA directly enhances the expression of genes associated with protein synthesis and transcription factors, thus favorably influencing TGase synthesis at both the transcriptional and posttranscriptional levels. Moreover, LexA activates four crucial genes involved in morphological differentiation, promoting spore maturation. Overall, our findings suggest that LexA plays a dual role as a master regulator of the SOS response and a significant contributor to TGase regulation and certain aspects of secondary metabolism, offering insights into the cellular functions of LexA and facilitating the strategic engineering of TGase overproducers.

Puerarin-containing rhein-crosslinked tyramine-modified hyaluronic acid hydrogel for antibacterial and anti-inflammatory wound dressings

Wound infections, posing a grave risk of severe physical consequences and even mortality, exact a substantial financial toll on society, rendering them among the most formidable challenges confronting our world today. A critical imperative is the development of hydrogel dressings endowed with immune-regulating and antibacterial properties. This study is founded upon the symbiotic physical and efficacious attributes of two small natural molecules. An injectable hydrogel is meticulously crafted by encapsulating puerarin (PUE) into tyramine-modified hyaluronic acid, subsequently introducing rhein (RHE), and catalyzing the formation of inter-phenol crosslinks with H2O2/horseradish peroxidase (HA-Tyr-R@P). Exhibiting a favorable microenvironmental impact the developed hydrogel attains an antibacterial efficacy exceeding 95 %, coupled with a wound closure rate twice that of the control group. HA-Tyr-R@P hydrogels not only inhibit bacterial growth but also mitigate inflammation, fostering wound healing, owing to their harmonized physicochemical characteristics and synergistic therapeutic effects. This work underscores the creation of a singular, versatile hydrogel platform, negating the complexities and side effects associated with pharmaceutical preparations. Furthermore, it offers new ideas for the formulation of RHE-based hydrogels for wound healing, emphasizing the pivotal role of natural small molecules in advancing biological materials.

Corneal collagen cross-linking in patients with keratoconus from the Dresden protocol to customized solutions: theoretical basis.

Keratoconus is an ectatic condition characterized by gradual corneal thinning, corneal protrusion, progressive irregular astigmatism, corneal fibrosis, and visual impairment. The therapeutic options regarding improvement of visual function include glasses or soft contact lenses correction for initial stages, gas-permeable rigid contact lenses, scleral lenses, implantation of intrastromal corneal ring or corneal transplants for most advanced stages. In keratoconus cases showing disease progression corneal collagen crosslinking (CXL) has been proven to be an effective, minimally invasive and safe procedure. CXL consists of a photochemical reaction of corneal collagen by riboflavin stimulation with ultraviolet A radiation, resulting in stromal crosslinks formation. The aim of this review is to carry out an examination of CXL methods based on theoretical basis and mathematical models, from the original Dresden protocol to the most recent developments in the technique, reporting the changes proposed in the last 15y and examining the advantages and disadvantages of the various treatment protocols. Finally, the limits of non-standardized methods and the perspectives offered by a customization of the treatment are highlighted.

Microfluidic Assembly of Degradable, Stereocomplexed Hydrogel Microparticles.

Hydrogel microparticles (HMPs) have been investigated widely for their use in tissue engineering and drug delivery applications. However, translation of these highly tunable systems has been hindered by covalent cross-linking methods within microparticles. Stereocomplexation, a stereospecific form of physical cross-linking, provides a robust yet degradable alternative for creating translationally relevant HMPs. Herein, 4-arm polyethylene glycol (PEG) stars were used as macromolecular initiators from which oligomeric poly(l-lactic acid) (PLLA) was polymerized with a degree of polymerization (DPn) of 20 on each arm. Similarly, complementary propargyl-containing ABA cross-linkers with enantiomeric poly(d-lactic acid) (PDLA) segments (DPn = 20) on each arm. Droplets of these gel precursors were formed via a microfluidic organic-in-oil-in-water system where microparticles self-assembled via stereocomplexation and were stabilized after precipitation in deionized water. By varying the flow rate of the dispersed phase, well-defined microparticles with diameters of 33.7 ± 0.5, 62.4 ± 0.6, and 105.7 ± 0.8 μm were fabricated. Gelation due to stereocomplexation was confirmed via wide-angle X-ray scattering in which HMPs exhibited the signature diffraction pattern of stereocomplexed PLA at 2θ = 12.2, 21.2, 24.2°. Differential scanning calorimetry also confirmed stereocomplexation by the appearance of a crystallization exotherm (Tc = 37 °C) and a high-temperature endotherm (Tm = 159 °C) that does not appear in the homocrystallization of PLLA or the hydrogel precursors. Additionally, the propargyl handle present on the cross-linker allows for pre- or post-assembly thiol-yne "click" functionalization as demonstrated by the addition of thiol-containing fluorophores to the HMPs.

Effect of processing conditions on the properties of vitrimerized polybutylene terephthalate prepared by reactive extrusion

This study examined the effects of continuous reactive extrusion on the properties of vitrimerized thermoplastics derived from polybutylene terephthalate (PBT). PBT formulations were prepared using epoxy (crosslinker) and zinc acetylacetonate (transesterification catalyst) to form dynamic covalent networks. Reactive extrusion was performed at different screw rotation speeds (50, 100, 200 rpm) with controlled residence times to compare the effects of the shear stress during the formation of crosslinks on the vitrimer properties. The rheological behavior of the extruded vitrimerized PBT suggests that competition between chain scission and branching occurs during the dynamic crosslinking of thermoplastics. Increasing the shear stress and/or time in the extruder was found to favor chain scission over crosslinking which makes gelation unattainable. In the case of injection molded specimens, tensile and X-ray diffraction tests of vitrimerized PBT extruded at different shear stress indicated a significant relationship between the degree of crosslinking, the orientation of crystallites, and the ability of the polymer network to withstand deformation at elevated temperatures.

Darobactin Substrate Engineering and Computation Show Radical Stability Governs Ether versus C-C Bond Formation.

The Gram-negative selective antibiotic darobactin A has attracted interest owing to its intriguing fused bicyclic structure and unique targeting of the outer membrane protein BamA. Darobactin, a ribosomally synthesized and post-translationally modified peptide (RiPP), is produced by a radical S-adenosyl methionine (rSAM)-dependent enzyme (DarE) and contains one ether and one C-C cross-link. Herein, we analyze the substrate tolerance of DarE and describe an underlying catalytic principle of the enzyme. These efforts produced 51 enzymatically modified darobactin variants, revealing that DarE can install the ether and C-C cross-links independently and in different locations on the substrate. Notable variants with fused bicyclic structures were characterized, including darobactin W3Y, with a non-Trp residue at the twice-modified central position, and darobactin K5F, which displays a fused diether ring pattern. While lacking antibiotic activity, quantum mechanical modeling of darobactins W3Y and K5F aided in the elucidation of the requisite features for high-affinity BamA engagement. We also provide experimental evidence for β-oxo modification, which adds support for a proposed DarE mechanism. Based on these results, ether and C-C cross-link formation was investigated computationally, and it was determined that more stable and longer-lived aromatic Cβ radicals correlated with ether formation. Further, molecular docking and transition state structures based on high-level quantum mechanical calculations support the different indole connectivity observed for ether (Trp-C7) and C-C (Trp-C6) cross-links. Finally, mutational analysis and protein structural predictions identified substrate residues that govern engagement to DarE. Our work informs on darobactin scaffold engineering and further unveils the underlying principles of rSAM catalysis.

Highly durable perfluorosulfonic acid proton exchange membrane by combining inorganic free radical scavengers and organic antioxidants

In this work, a new type of complex was constructed by coordinating quercetin (QC) with cerium (Ce) ions. This complex was introduced into perfluorosulfonic acid resin (PFSA) to fabricate a proton exchange membrane. The coordination process prevented the formation of ion cross-links between cerium and sulfonic acid groups in PFSA, thereby keeping proton conductivity and fuel cell performance of membrane samples at a high level. Due to the insolubility of quercetin in water, its coordination with cerium minimized cerium migration, providing long-lasting resistance to free radicals. The effects of additives on PFSA membrane properties were investigated by measuring IEC, water uptake, swelling ratio, and proton conductivity. Fenton degradation experiments and membrane electrode assembly performance tests was conducted simultaneously. The results demonstrated that compared to the addition of quercetin or cerium alone, the use of QC-Ce increased the proton conductivity by 23.70% after 24-h Fenton degradation and lowered fluoride release by 58.29%. Meanwhile, the PFSA/QC-Ce composite membrane samples maintained an open circuit voltage of 0.935 V and a maximum power density of 668.15 mW cm−2 after 96 h of open circuit voltage hold testing.

Sustainable 3D printing by reversible salting-out effects with aqueous salt solutions

Achieving a simple yet sustainable printing technique with minimal instruments and energy remains challenging. Here, a facile and sustainable 3D printing technique is developed by utilizing a reversible salting-out effect. The salting-out effect induced by aqueous salt solutions lowers the phase transition temperature of poly(N-isopropylacrylamide) (PNIPAM) solutions to below 10 °C. It enables the spontaneous and instant formation of physical crosslinks within PNIPAM chains at room temperature, thus allowing the PNIPAM solution to solidify upon contact with a salt solution. The PNIPAM solutions are extrudable through needles and can immediately solidify by salt ions, preserving printed structures, without rheological modifiers, chemical crosslinkers, and additional post-processing steps/equipment. The reversible physical crosslinking and de-crosslinking of the polymer through the salting-out effect demonstrate the recyclability of the polymeric ink. This printing approach extends to various PNIPAM-based composite solutions incorporating functional materials or other polymers, which offers great potential for developing water-soluble disposable electronic circuits, carriers for delivering small materials, and smart actuators.

Construction and Analysis of Automated Human Resource Management System

The issues of constructing and developing an automated system that is adaptive to external internal factors of personnel management are important for improvement of personal management of modern enterprises. Due to these issues there is a need in the automation the process of approving both strategic and operational plans at the enterprise. To reach this goal the adaptive personnel management system under consideration is built on the basis of an automated dynamic model, taking into account decision support in the personnel management process for each employee, which makes it possible to reduce the significance of the discrepancy between strategic and operational tasks. The results of a study of local sustainability for the constructed automated personnel management system make it possible to draw a conclusion about possibilities to increase the efficiency of using human resources in the enterprise with the use of the system. The proposed automated personnel management system is presented in the form of cross-links, which helps prevent duplication of employee tasks.

Gamma Irradiation Effect on Polymeric Chains of Epoxy Adhesive.

The study of materials for space exploration is one of the most interesting targets of international space agencies. An essential tool for realizing light junctions is epoxy adhesive (EA), which provides an elastic and robust material with a complex mesh of polymeric chains and crosslinks. In this work, a study of the structural and chemical modification of a commercial two-part flexible EA (3M™ Scotch-Weld™ EC-2216 B/A Gray), induced by 60Co gamma radiation, is presented. Combining different spectroscopic techniques, such as the spectroscopic Fourier transform infrared spectroscopy (FTIR), the THz time-domain spectroscopy (TDS), and the electron paramagnetic resonance (EPR), a characterization of the EA response in different regions of the electromagnetic spectrum is performed, providing valuable information about the structural and chemical properties of the polymers before and after irradiation. A simultaneous dissociation of polymeric chain and crosslinking formation is observed.The polymer is not subject to structural modification at an absorbed dose of 10 kGy, in which only transient free radicals are observed. Differently, between 100 and 500 kGy, a gradual chemical degradation of the samples is observed together with a broad and long-living EPR signal appearance. This study also provides a microscopic characterization of the material useful for the mechanism evaluation of system degradation.

Cyclic Peptides from Graspetide Biosynthesis and Native Chemical Ligation.

The ribosomally synthesized and post-translationally modified peptide (RiPP) superfamily of natural products includes many examples of cyclic peptides with diverse macrocyclization chemistries. The graspetides, one family of macrocyclized RiPPs, harbor side chain-side chain ester or amide linkages. We recently reported the structure and biosynthesis of the graspetide pre-fuscimiditide, a 22-amino-acid (aa) peptide with two ester cross-links forming a stem-loop structure. These cross-links are introduced by a single graspetide synthetase, the ATP-grasp enzyme ThfB. Here we show that ThfB can also catalyze the formation of amide or thioester cross-links in prefuscimiditide, with thioester formation being especially efficient. We further show that upon proteolysis to reveal an N-terminal cysteine residue, the thioester-linked peptide rapidly and quantitatively rearranges via native chemical ligation into an isopeptide-bonded head-to-tail cyclic peptide. The solution structure of this rearranged peptide was determined by using 2D NMR spectroscopy experiments. Our methodology offers a straightforward recombinant route to head-to-tail cyclic peptides.

Shining light on DHX9: UV-induced stress granules illuminate protective mechanisms for daughter cell resilience

In a recent article in Cell, Zhou etal. investigate the origins, composition, and biological consequences of UV-induced stress granules. They find that UV-induced stress granules are triggered by the formation of RNA-protein crosslinks, uniquely contain DHX9 as a marker, form during mitosis independently of translation repression, and are enriched in intron-containing RNAs and splicing factors. Moreover, UV-induced granules contain double-stranded RNA (dsRNA) and trigger a dsRNA response. This work identifies a mechanism for resolving UV-damaged RNA and broadens the types of cytosolic "stress granules" that form.

Lactosporin loaded electrospun nanofibrous membrane: Novel antibacterial and wound dressing patch

IntroductionAny disruption in the cohesion of skin tissue is called a skin ulcer. If the skin lesion is a superficial lesion, it heals easily. But some wounds, such as diabetic wounds, bedsores, and burns, are difficult to heal and are often associated with infection. Therefore, one of the new methods used to treat such wounds is skin patch. MethodIn this study, partly purified lactosporin (LP), as novel postbiotic, was extracted from Bacillus coagulans, and its antibacterial properties against six bacterial species, namely Escherichia coli, Micrococcus Luteus, Pseudomonas aeruginosa, Staphylococcus aureus, Staphylococcus epidermis, and Klebsiella pneumonia were investigated. An electrospun nanofibrous membrane (NFM) containing LP was electrospun based on the three polymers including hyaluronic acid (HA), chitosan, and polyvinyl alcohol (PVA) and its potential for biomedical applications was analized. The morphological characteristics, hydrophilic properties, cytotoxicity, and wound healing potential of LP-loaded NFMs were investigated. ResultsIt was revealed that extracted LP includes supperior antibacterial properties, which is beneficial for developing wound dressing patches. The results showed fabricated composite NFMs are bead-free and uniform. The average diameter of uncross-linked and cross-linked nanofibers are 281 ± 10 nm and 359 ± 51 nm, respectively. These NFMs are hydrophilic in both cross-linked and uncross-linked forms and the contact angles of them were 39 and 13°, respectively. These NFMs were also tested for cytotoxicity by the MTT assay and were found to be non-toxic. ConclusionThese results indicate that HA/CS/PVA/LP NFM could act as an efficient antibacterial and multifunctional wound dressing patch.