Foliar Application Of Zinc Research Articles

The effect of foliar spraying of some micronutrients and lanthanum on the morphological and physiological characteristics of summer savory (Satureja hortensis L.) under hydroponic and soil conditions

BackgroundThe use of lanthanum (La) as a rare element has increased in agriculture. Summer savory (Satureja hortensis L.) is an herbaceous and medicinal plant that has received attention recently. The present study aimed to investigate the effects of foliar application of zinc (Zn), copper (Cu), manganese (Mn), and La at different growth stages, including vegetative, reproductive, and vegetative to harvest on morphological and physiological traits of S. hortensis under hydroponic and soil conditions in the greenhouse. The study was arranged in a factorial experiment based on a completely randomized design (CRD) with three replications.ResultsResults of hydroponic condition showed that foliar application of Cu, Zn, and Mn were the most effective treatments to improve the measured morphological and physiological traits. Moreover, La was not more appropriate in increasing the quantitative and qualitative characteristics. Also, results showed that in soil cultivation, foliar application of micronutrient elements increased the ratio of leaf-to-stems, antioxidant compounds, and the percentage of essential oils, while the application of Mn, Cu, Zn, and La did not have positive effects on the increase in vegetative characteristics in all three stages of foliar application compared with the control treatment.ConclusionsCu, Zn, and Mn in appropriate concentrations can increase growth and physiological characteristics of summer savory in hydroponic systems.

Zinc fortification and legume incorporation in forage based cropping systems: Implications for yield and nutrient dynamics

Aim: To evaluate the synergistic effects of legume intercropping and zinc fortification on forage yield, and plant and soil nutrient dynamics. Methodology: The experiment was laid out in a Factorial Randomized Block Design. Treatment combinations included five cropping systems, i.e., sole maize, sole cowpea, sole soybean, maize + cowpea (2:1), maize + soybean (2:1) and three zinc levels; Zn0= control or no zinc application, Zn1 = 20 kg ZnSO4 ha-1 (basal soil application) and Zn2 = 20 kg ZnSO4 ha-1 (basal soil application) + 0.5% ZnSO4 sprayed twice (30 DAS and 50 DAS). Results: Sole maize recorded highest dry matter (11938 kg ha-1) yield. Soil + foliar zinc application (Zn2) recorded an increase of 37.93 % increase in dry matter yield over control (Zn0). Maize + legumes recorded higher nitrogen uptake. There was an overall increase (122.34%) in zinc uptake from Zn0 to Zn2. Soil + foliar applied Zn increased ZnUE by 27.60 % (619.14 kg) over soil applied Zn (485.19 kg). Zn application increased Zn values of soil to 0.50 ppm with soil application and 0.56 ppm with soil + foliar application from the initial value of 0.36 ppm. Interpretation: Intercropping of legumes and application of 20 kg ZnSO4 as basal soil application plus two foliar applications of 0.5% ZnSO4 at 30 and 50 days after sowing significantly increased forage yield, nutrient uptake and enhanced soil zinc levels. Key words: Cropping systems, Intercropping, Legumes, Nutrient dynamics, Yield, Zn fortification

Effect of different levels of micronutrients on vegetative growth, yield and fruit quality of Mango (Mangifera indica L.)

An experiment was carried out to ascertain the impact of foliar application of certain micro-nutrients on fruit yield and quality of Mango (Mangifera indica L.) cultivars "Dashehari" and "Langra" at Agriculture Research Station, Banswara, Maharana Pratap University of Agriculture and Technology, Udaipur, Rajasthan, during the year 2016-17 on seventeen years old mango trees. The experiment was laid out in One way ANOVA (Randomized Block Design) with eight treatments in thrice replications for combinations with different micronutrients Zinc sulphate, Copper sulphate, Borax, boric acid and IIHR-2 mango special were applied on mango cultivars "Dashehari" and "Langra" at different growth stages. All were fertilized with a recommended dose of NPK (1500:500:1000 g as N, P2O5 and K2O). The spraying was done twice; during mid-October, mid-December, and mid-February before the flowering stage and again in mid-March at the marble stage during both years of study. Foliar sprays, in general, improved fruit yield. Yields were exceptionally higher in response to foliar application of Zinc (Zn), Copper (Cu) and boron (B) compared to other treatments. Result proved that foliar application of mango trees with [(RDF + Zinc sulphate (100 g) + Copper sulphate (50 g) + Boric acid (50 g) as soil + Zinc sulphate (0.2%) + Copper sulphate (0.1%) + Boric acid (0.1%) as foliar (Two sprays before flowering and marble stage)] was the promising treatment for improvement of vegetative growth, yield and fruit quality. This treatment was also found best for maximum total carotenoids, average fruit weight as well as fruit yield.

Impact of Zinc Application on Growth, Yield, and Quality of African Marigold in Semi-Arid Conditions

Marigold is a widely cultivated, hardy flower crop known for its adaptability. Among the various intercultural practices in marigold cultivation, foliar application of zinc plays a critical role in enhancing yield and quality, however, standardization of this practice is necessary to optimize commercial production. Hence, the investigation aimed to standardize foliar zinc application for improving productivity in African marigold (Pusa Narangi Gainda) at Rajasthan Agricultural Research Institute, Jaipur, during 2020-21, and 2021-22. Two concentrations of zinc sulphate (ZnSO₄), Z1 (0.2%), and Z2 (0.5%), were applied at 35 and 65 days after transplanting (DAT) in a factorial randomized block design with three replications. Results indicated that Z1 (ZnSO₄ 0.2%) was most effective in increasing plant height, and promoting early bud initiation, and flower opening, while Z2 (ZnSO₄ 0.5%) significantly enhanced plant spread, primary branching, leaf dimensions, plant biomass, root-to-shoot ratio, flower diameter, and yield parameters such as flower mass and number. Z2 also improved quality traits like chlorophyll and xanthophyll content. Statistical analysis revealed significant differences among treatments, suggesting that the application of ZnSO₄ at 0.5% may be recommended for optimizing growth, yield, and quality in commercial marigold cultivation, thereby enhancing productivity and profitability.

Enhancing the productivity and nutritional quality of lentil (Lens culinaris L.) with combined foliar application of zinc and urea

There is need to enhance the nutritional quality of lentil for ameliorating nutrient deficiencies in people especially vegetarians. The study was carried out to investigate the effect of soil application of zinc (Zn) and foliar application of Zn and nitrogen [(N) through urea] on grain yield and enrichment of grain with Zn in lentil. The field experiments were conducted at two locations Ludhiana and Faridkot, India. The experiment was consisted of eleven treatments (control, soil application of 25 kg ha−1 ZnSO4 at sowing time, foliar spray of sole 0.5% ZnSO4 or 2% urea and combined foliar spray of 0.5% ZnSO4 + 2% urea at flowering, pod formation, and flowering + pod formation stages). The foliar application of 0.5% ZnSO4 + 2% urea spray at flowering + pod formation stages significantly improved the grain yield, Zn and iron (Fe) concentration at maturity in stover and grain (whole as well as split) of lentil and protein content in stover and grain. The combined application of ZnSO4 (0.5%) + urea (2%) at flowering + pod formation stages can be done to improve not only the grain yield (on an average 29.5%) but also the Zn (49.7%) and Fe (17.4%) concentration in lentil grain, which, can help in ameliorating malnutrition in human population.

Variation of grain zinc, phytate concentration and phytate : Zn molar ratio in unpolished and polished rice affected by foliar zinc application among Thai rice varieties

ABSTRACT This study evaluated the variation in grain yield and Zn concentration in rice after foliar application of Zn and the impact on its phytate : Zn molar ratio among 21 rice varieties. Rice varieties were grown under field conditions using a randomized complete block design with four replications over two cropping years in 2020 and 2021 during the rainy season. Foliar Zn application varied grain yield from −26.0 to 13.6% in 2020 and −14.7 to 30.4% in 2021 compared with non-foliar Zn. Grain Zn was varied from 0.5 to 31.1% in 2020 and from −5.9 to 47.8% in 2021 in unpolished rice and from 9.4 to 47.0% in 2020 and from 8.2 to 163.0% in 2021 in polished rice. The phytate : Zn molar ratio was decreased when foliar Zn was applied to the unpolished and polished rice, with a lower ratio in the polished rice. The phytate : Zn molar ratio decreased exponentially with increasing grain Zn concentration in the unpolished rice, while decreasing linearly with increasing grain Zn concentration in the polished rice. The results of this study suggest that foliar Zn application is a promising way to improve the grain Zn concentration and decrease the phytate : Zn molar ratio, thus being beneficial for human diets, but the effects of rice variety, cropping season, and the polishing process should be considered.

Effect of foliar application of water soluble fertilizer, sulphur, zinc and boron on growth, yield and economics of garlic (Allium sativum L.) in a vertisol

Effect of foliar application of water soluble fertilizer, sulphur, zinc and boron on growth, yield and economics of garlic (Allium sativum L.) in a vertisol

Effect of foliar application of zinc, mg and urea on growth, yield and economics of wheat (Triticum aestivum L.) crop

Effect of foliar application of zinc, mg and urea on growth, yield and economics of wheat (Triticum aestivum L.) crop

Effect of Nano-Zinc Oxide, Rice Straw Compost, and Gypsum on Wheat (Triticum aestivum L.) Yield and Soil Quality in Saline-Sodic Soil.

The salinity and alkalinity of soils are two fundamental factors that limit plant growth and productivity. For that reason, a field study conducted at Sakha Agric. Res. Station in Egypt during the 2022-2023 winter season aimed to assess the impact of gypsum (G), compost (C), and zinc foliar application in two images, traditional (Z1 as ZnSO4) and nanoform (Z2 as N-ZnO), on alleviating the saline-sodic conditions of the soil and its impact on wheat productivity. The results showed that the combination of gypsum, compost, and N-ZnO foliar spray (G + C + Z2) decreased the soil electrical conductivity (EC), sodium adsorption ratio (SAR), and exchangeable sodium percentage (ESP) by 14.81%, 40.60%, and 35.10%, respectively. Additionally, compared to the control, the G + C + Z2 treatment showed improved nutrient content and uptake as well as superior wheat biomass parameters, such as the highest grain yield (7.07 Mg ha-1), plant height (98.0 cm), 1000-grain weight (57.03 g), and straw yield (9.93 Mg ha-1). Interestingly, foliar application of N-ZnO was more effective than ZnSO4 in promoting wheat productivity. Principal component analysis highlighted a negative correlation between increased grain yield and the soil EC and SAR, whereas the soil organic matter (OM), infiltration rate (IR), and plant nutrient content were found to be positively correlated. Furthermore, employing the k-nearest neighbors technique, it was predicted that the wheat grain yield would rise to 7.25 t ha-1 under certain soil parameters, such as EC (5.54 dS m-1), ESP (10.02%), OM (1.41%), bulk density (1.30 g cm-3), infiltration rate (1.15 cm h-1), and SAR (7.80%). These results demonstrate how adding compost and gypsum to foliar N-ZnO can improve the soil quality, increase the wheat yield, and improve the nutrient uptake, all of which can support sustainable agriculture.

Foliar application of Azospirillum brasilense, salicylic acid and zinc on wheat Performance under rain–fed condition

Foliar application of Azospirillum brasilense, salicylic acid and zinc on wheat Performance under rain–fed condition

Influence of Foliar Zinc Application on Cadmium and Zinc Bioaccessibility in Brassica chinensis L.: In Vitro Digestion and Chemical Sequential Extraction.

Foliar zinc (Zn) application can affect the accumulation and bioaccessibility of cadmium (Cd) and Zn in crops. However, the mechanisms by which foliar Zn application influences Cd and Zn bioaccessibility remain elusive. This study examined the effects of spraying ZnSO4 and ZnNa2EDTA on bioaccessibility and chemical forms of Cd and Zn in pakchoi (Brassica chinensis L.) shoots and evaluated human health risks via pakchoi consumption. Spraying ZnSO4 reduced the concentrations of ethanol-extractable (Fethanol) and deionized water-extractable (Fd-H2O) Cd, as well as the corresponding bioaccessible Cd concentrations (20.3-66.4%) and attendant health risks of Cd, whereas spraying high-dose ZnNa2EDTA significantly increased the concentrations of both Cd forms and bioaccessible Cd. Spraying ZnSO4 and high-dose ZnNa2EDTA significantly increased the concentrations of Zn in Fethanol and Fd-H2O and the corresponding bioaccessible Zn concentrations (0.8-8.3-fold). Fethanol and Fd-H2O were the primary sources of bioaccessible Cd and Zn, contributing more than 59% of the bioaccessible Cd and Zn. These results indicate that foliar Zn application can affect Cd and Zn bioaccessibility in pakchoi mainly by modulating Cd and Zn in Fethanol and Fd-H2O. These findings provide scientific support for the development of more efficient measures to produce safe and high-quality leafy vegetables from Cd-polluted soils.

Integrated nutrient management and agronomic zinc biofortification to improve wheat crop and soil health

It is possible to boost nutrient accumulation in grain, enhance grain production, and enhance the soil’s physical characteristics through the use of bio-fertilizers, zinc delivery methods, and organic and inorganic fertilizers integrated in a balanced manner. Often, zinc (Zn) is insufficient in soil due to a lack of organic matter additions to the soil. The world’s food supply is secured by Zn, a crucial micro nutrient. The effect of different zinc application methods and integrated nutrient management methods were tested on wheat crops based on crop production, nutrient uptake, and soil physico-chemical characteristics. Three distinct bio fertilizers, namely Azotobacter, Phosphate solubilizing bacteria, and Zn solubilizing bacteria were used in the experiment. There was a significantly greater number of effective tillers m−2 to the tune of 385 and 388 tillers m−2 and DTPA exchangeable Zn in the final soil of about 0.70 mg/kg with the soil and foliar application of zinc compared with the other treatments. A variety of integrated nutrient management treatments increased crop productivity and soil physico-chemical parameters by increasing soil nutrient availability. The current study indicates that adding organic manure is essential to sustainably preserving soil quality and crop productivity. It should therefore be included in nutrient management plans for crops that require a lot of nutrients.

Zinc foliar application may alleviate drought stress in wheat species through physiological changes

Drought is the greatest threat to food security in the climate change scenario, which affects crop plants' growth and development by disturbing the plant's physiological and biochemical processes. Zinc (Zn) is an essential micronutrient in many metabolic processes and may improve plant tolerance to water deficit conditions besides its nutritional value.This study investigated the reaction of several wheat species with different ploidy levels to foliar Zn application under water stress. Water stress significantly reduced grain yield (GY), leaf relative water contents (RWC), chlorophyll (Chla and Chlb), and carotenoid (Car) contents. Water stress also impacted several other physiological characteristics by increasing leaf hydrogen peroxide (HP), free proline (Prl), malondialdehyde (MDA) contents, soluble protein (PC), sodium content (Na+), and antioxidant enzymes, including peroxidase (Pox), ascorbate peroxidase (Aes) and catalase (Cat). Remarkably, the Zn application alleviated yield reduction caused by water stress. Moreover, the Zn application increased grains' Zn, potassium content (K+), and K+/Na+ ratio, RWC, Chl, Car contents, Pox, Aes, and Cat activities while significantly reducing MDA, HP, and Na+ contents compared with the control treatment. Pox, Aes, and Cat activities increased to higher concentrations in 6x and 4x than in 2x, indicating that the 6x and 4x species responded better to water stress. Wild and landrace varieties of 4x, such as T. dicoccum, T. ispahanicum, and T. dicoccoides, showed better water stress tolerance than the landrace varieties of 2x and 6x species. These species may be a valuable genetic source for improving modern bread and durum wheat to water stress.

Biofortifying drought-tolerant rice: enhancing growth and nutritional quality with foliar iron and zinc applications in Eastern India

Micronutrient deficiencies in staple food crops pose a significant global health concern, especially in regions prone to drought. Agronomic biofortification offers a promising solution by enhancing the content of essential micronutrients. This study aims to identify efficient rice varieties for iron (Fe) and zinc (Zn) biofortification through foliar applications. A field experiment was carried out during kharif season in 2019 and 2020 with four drought-tolerant rice varieties (Swarna Shreya, Swarna Shakti Dhan, Sahbhagi Dhan, and DRR Dhan 42) were assessed under four foliar applications of Fe and Zn (control, 1% of Fe, 1% of Zn and combined 1% of Fe + 1% of Zn) at Indian Council of Agricultural Research-Research Complex for Eastern Region (ICAR-RCER), Patna. The highest grain yield of 5.65 t/ha was attained with the main plot treatment, Swarna Shreya variety, and in the subplot treatment, Fe + Zn foliar application resulted in a yield of 5.50 t/ha. The combined foliar application of Fe + Zn demonstrates the highest chlorophyll content and starch synthesis. Foliar application of combined Fe and Zn increased paddy grain Fe and Zn concentration by up to 30 and 16%, respectively, compared to the control. This finding is important for addressing micronutrient deficiencies in regions where rice is a dietary staple. Thus, Swarna Shreya, in combination with iron and zinc foliar application is a promising option for enhancing yield and fortifying grains in rainfed areas of eastern India.

Agronomic biofortification of finger millet for zinc, and its influence on yield and partitioning of zinc, iron, and calcium in the plant

Zinc (Zn) deficiency in humans is the most common, and zinc requirement is catered mainly by cereal food grains which have lower zinc content. Finger millet is one of the staple food crops in Africa and India and has only 25 to 30 µg Zn g−1 of grain. Breeding efforts have improved the grain-Zn content to nearly 40 µg g−1 of grain, which is far below the recommended dietary allowance of 15 mg day−1 adult−1, and such varieties are not suited to all the finger millet cultivation regions. Therefore, the objective of the present studies is to enhance the grain-Zn content of locally adapted varieties through agronomic biofortification, which can be adapted for any variety and region. The easy, promising, and cost-effective approach is the soil or foliar application of zinc to increase the grain-Zn content. Present studies over four years revealed that the foliar application of 0.5% ZnSO4·7H2O solution at flowering and 20 days after flowering (DAF) is apt to increase the grain-Zn significantly to 40 µg g−1 of grain. Whereas the soil application of ZnSO4·7H2O at 12.5 kg ha−1 is appropriate to increase the grain yield to 504 g m−2 from 444 g m−2 in the control. The partitioning of zinc and calcium was higher toward the leaf sheath, leaf lamina, and husk than the other plant parts, whereas iron was toward the root. Therefore, the translocation of zinc from leaves to grain needs to be improved for further increase in grain-zinc of finger millet.

Foliar application of zinc its effect in plant growth and seed yield of green gram (Vigna radiata L.)

Foliar application of zinc its effect in plant growth and seed yield of green gram (Vigna radiata L.)

Response of Different Level of Nitrogen and Foliar Application of Nano Zinc on Physico-chemical Properties of Soil in Wheat (Triticum aestivum. L) Var. PWB-373

A field experiment was conducted during the of 2023-24 at the Research Farm, Department of Soil Science and Agricultural Chemistry, Naini Agriculture Institute, Sam Higginbottom University of Agriculture Technology and Sciences, to investigate the Response of different levels of Nitrogen and Foliar application of nano zinc on Soil Health and Yield of Wheat (Triticum aestivum L.). We designed the experiment using a Randomized Block Design (RBD) with 10 treatments and three replications. Results indicated that the application of nano fertilizers significantly influenced various soil physico chemical properties. Bulk density was 1.27Mg m⁻³ to 1.31 Mg m⁻³ at 0-15 cm soil depth, and 1.29 to 1.32 Mg m⁻³ at 0-15 and 15-30 cm soil depth. Particle density was 2.65 to 2.67 Mg m⁻³ at 0-15 cm depth, and from 2.60 to 2.62 Mg m⁻³ at 15-30 cm depth. Pore space was 47.09% to 48.99% at 0-15 cm depth and 47.09% and 48.84% at 0-15 and 15-30 cm depth. Water holding capacity varied between 45.22% and 46.64% at 0-15 cm depth, and 45.14% and 46.89% at 15-30 cm depth. Soil pH was 6.98 to 7.04 at 0-15 cm depth and from 7.00 to 7.05 at 15-30 cm depth. Electrical conductivity (EC) was 0.13 dS m⁻¹ to 0.19 dS m⁻¹ at 0-15 cm depth, and from 0.13 dS m⁻¹ to 0.19 dS m⁻¹ at 15-30 cm depth. Organic carbon content was 0.423%-0.493% at 0-15 cm depth and 0.261% to 0.334% at 15-30 cm depth. The use of NPK and nano zinc also significantly influenced the availability of available nitrogen, phosphorus, potassium, and zinc. These findings suggest that nano fertilizers can effectively enhance soil health and wheat productivity.

Effect of foliar application of zinc and boron on growth and yield of sweet corn (Zea mays L. Saccharata)

Effect of foliar application of zinc and boron on growth and yield of sweet corn (Zea mays L. Saccharata)

Enhancing Wheat Growth and Yield through Foliar Application of Zinc in Combination with Methionine, Histidine and Citric Acid as Chelators

Enhancing Wheat Growth and Yield through Foliar Application of Zinc in Combination with Methionine, Histidine and Citric Acid as Chelators

Effect of Foliar Application of Zinc on Leaf Expanse, Dry Matter Accumulation and Its Correlation with Grain Yield in Wheat

Effect of Foliar Application of Zinc on Leaf Expanse, Dry Matter Accumulation and Its Correlation with Grain Yield in Wheat