Fold Belt Research Articles

Structural inheritances, fault segmentation and seismogenic potential at the front of the eastern Southern Alps (central Carnic Prealps, NE Italy)

New geological and morphotectonic surface data coupled with the revision of the ENI-Exploration & Production seismic lines, made it possible to review the tectonic structure of the Pliocene-Quaternary front of the eastern Southern Alps in the area between the Cellina River and the Tagliamento River (central Carnic Prealps, NE Italy). The eastern Southern Alps are a SE-verging fold and thrust belt in activity from the middle Miocene to the Present. The presence of Paleogene structural inheritances influenced the current structural arrangement of the thrust-belt and the potential seismogenesis, supporting segmentation of the Neoalpine external front. In particular, the presence of the NW-SE trending Mt.Ciaurlec – Palmanova – Pozzuolo structural high, inherited from the W-ward propagation of the External Dinarides during Paleogene, generated lateral lithological facies change and influenced not only the undulation between the Neogene-Quaternary Maniago-Meduno and Toppo-Forgaria Thrusts, but also the segmentation of the outermost portion of the Neoalpine external front consisting into two segments with different geometric and structural characteristics: 1) the ENE-WSW striking Arba-Sequals segment that runs buried under the upper Pleistocene sequences of the piedmont Friuli plain; 2) the W-E Ragogna segment that shows widespread evidence of surface deformation of the Last Glacial Maximum (LGM) alluvial plain. In particular, the long-lasting activity of the Ragogna segment is testified by the late Miocene-Middle Pleistocene angular unconformities, forced drainage anomalies and tilted and uplifted Quaternary palaeosurfaces. A discussion on the seismogenic potential of the investigated structures is proposed.

Genesis of the Jiada pegmatite lithium deposit in the Ke’eryin ore field, western Sichuan, China: Evidence from whole-rock trace element and Li isotope

The origin and petrogenesis of pegmatite-type lithium deposits within the Songpan-Garze Fold Belt (SGFB) of western China remain subjects of debate. To provide further insight on this subject, this study investigated the whole-rock trace elements and whole-rock Li isotopic compositions of the two-mica monzogranite (TMG) from the Ke’eryin composite pluton, the Jiada albite pegmatite (AP) and albite-spodumene pegmatite (ASP) and their metasedimentary wall rocks within the Ke’eryin ore field in the eastern SGFB. Modeling of muscovite-dehydration melting based on the whole-rock trace elements (e.g., Li, Rb, and Sr) and Rayleigh dehydration modeling related to the whole-rock Li isotopes suggest that the Jiada pegmatites are unlikely to have originated from the low-degree partial melting of metasandstone (MS) of the Zhuwo Formation. Variations in the whole-rock trace elements and Li isotope between the TMG and the Jiada pegmatites are consistent with the evolution trend of magmatic fractionation. However, the whole-rock Li isotopic compositions of the AP and ASP display inverse variation characteristics with the muscovite Li isotopic compositions, with the AP exhibiting lower Li concentrations and higher whole-rock δ7Li values than ASP. Furthermore, the variation patterns of whole-rock trace elements do not align perfectly with the Rayleigh-type fractional crystallization processes, implying other geological processes would be also involved in the formation of the Jiada pegmatites. Collectively considering the Li isotope behavior during various geological processes, the observed variations in whole-rock Li isotopic compositions between AP and ASP can be explained by aqueous fluid enrichment during the pegmatitic melt evolution. This suggests that fractional crystallization and fluid exsolution jointly contributed to pegmatite formation and Li mineralization in the Jiada deposit. Moreover, the whole-rock δ7Li values of the wall rock of ASP (MS2) are lower than those of MS and the wall rock of ASP (MS1), primarily due to metasomatism by 6Li-enriched fluids expelled from ASP and the kinetic diffusion of Li isotopes. The high concentrations of highly mobile elements, especially Li and Cs, combined with the low whole-rock δ7Li value of the metasandstone, could serve as effective tracers for locating concealed orebodies and evaluating the metallogenic potential of Li mineralization.

Stress evolution of fault-and-thrust belts in 2D numerical mechanical models

We employed numerical models to examine the dynamics of fold-and-thrust belts (FTBs), particularly focusing on the spatial and temporal interplay between stress variations and fault development. Our study explores the effects of variables such as layer thickness, basal friction, and surface diffusivity on the FTBs’ structural development, emphasizing the conditions under which frontal thrusts form. We found that fault activities within FTBs exhibit a cyclic behavior characterized by phases of initiation, quiescence, and reactivation. For over 95% of the total cycle duration, the frontal thrusts are the only active structures, and the stress within the FTB predominantly remains in a critical state. During the remaining 5%, the stress becomes over-critical, leading to the formation of a proto-thrust zone and the reactivation of pre-existing thrusts within the FTB. The lateral growth rate of FTBs is directly related to the thickness of the deforming layer, with the progression of the deformation front maintaining a steady pace across the study period. Additionally, our analysis on the progression of FTBs highlights the critical role of zonal failure spacing in determining the structural styles within FTBs. Our results indicate that narrowly spaced zonal failures, which promote the emergence of low-angle forethrusts, are more likely to occur at increased distances from the backstop. This explains the sequential frontal failure in the FTB; however, the stress accumulating at the rear weak zones also play an important role in the evolutionary patterns of the FTB. Our study offers new insights into the complex processes governing the mountain formation.

Fold-thrust belt in the southern front of the central High Atlas (Morocco): Analysis and implications for the tectonic inversion of the atlas system

Thrust folds have developed significantly in the meso-Cenozoic rock units of the Errachidia-Boudnib basin. The study areas correspond to the north part of the Pre-African Trough, which is located between the Anti-Atlas and the Atlas systems. It is characterized by faulted anticlines that are indicative of a foreland orogenic context.The Atlas system's structural evolution underwent several stages, starting with a Triassic extensional event followed by a period of fault reactivation during the Atlas compression. This research focuses on examining the thrust and detachment folds associated with both reverse and strike-slip components. For this purpose, we performed detailed geological mapping and interpretation of folding and fault slip data.As a result of shortening, field observations reveal that the study area exhibited well-developed thrusting geometry. Preexisting blind faults and multiple decollement levels within favorable formations such as Cenomanian evaporitic marls, Cenomanian-Turonian marls rich in organic matter, and Senonian argillites influence the folding patterns, which are not uniform. The findings demonstrate two key points. First, the most significant folds have formed along major blind thrusts. Subsequently, between these major faults, detachment folds were developed within the Jurassic-Cretaceous strata. Currently, due to erosion, certain thrusts have become visible, including the Ta'bbast thrust fault, Ait Atman (from the first stage), and the Timazguit fault zone (from the second stage). The South Atlas fault largely remains a blind fault. Additionally, the study emphasizes the presence of strike-slip components and en-echelon folding, indicating a transpressional regime during the uplift of the Atlas system.

Lithofacies and deformation structure of the Bandarban Anticline, Chittagong–Tripura Fold Belt, Bangladesh – Depositional environments and tectonic implications

Lithofacies and deformation structure of the Bandarban Anticline, Chittagong–Tripura Fold Belt, Bangladesh – Depositional environments and tectonic implications

Subaerial to subaqueous volcaniclastics from the Bayana sub-basin, North Delhi Fold Belt (NDFB), India: Evidence for a Paleoproterozoic subduction margin

Subaerial to subaqueous volcaniclastics from the Bayana sub-basin, North Delhi Fold Belt (NDFB), India: Evidence for a Paleoproterozoic subduction margin

Heterogeneous deformation in fold and thrust belts induced by anisotropies in the ocean topography; the South Portuguese Variscan Zone example (SW Portugal)

The Variscan fold and thrust belt related with the South Portuguese Zone presents a SW forward propagation and the coeval development of synthetic folds and thrusts pervasive at all scales. Although several models have been proposed for their formation, the estimated strain pattern is more compatible with a push from the rear induced by the north-eastern subduction zone. Although there is a strong consistence concerning the kinematics of these Variscan structures, there is an important contrast of their geometries between the inner and the external sectors, where the very low dips prevails. Although, there are some previous models suggesting that the behaviour of the more external domains could be related with the interference between the undeformed sedimentary sequence of the upper plate with the active margin of the fold and thrust belt, independent evidence of this process is lacking. The realization of scaled analogue experiments concerning the Carboniferous evolution of SW Iberia Variscides, not only show that they could induced the flat lying major thrust of the external domains, but also emphasize their important role in the structural evolution of much of the fold and thrust belt.

Stratigraphy and Basin Analysis of the West Rand Group, Witwatersrand Supergroup

Abstract The Mesoarchaean West Rand Group displays a layer-cake stratigraphy with lithostratigraphic units correlatable on a basin-wide scale. The ~5 km-thick succession consists of fluvial braidplain and shelf deposits, which range from shallow inner shelf marine orthoquartzites, outer shelf argillites to starved shelf iron-formations. Minor diamictites are of debris flow origin and are possibly related to glacial activity. Three major sequences are present: Sequence I (Hospital Hill Subgroup) is bounded by an angular unconformity at the base of the Orange Grove Formation and a low-angle unconformity at the base of the Promise diamictite. Sequence II (Government Subgroup) extends from the base of the Promise diamictite to a well-defined low-angle unconformity at the base of the Koedoeslaagte Formation. Sequence III (Jeppestown Subgroup) comprises the succession between the Koedoeslaagte Formation and the Maraisburg Formation, up to the low-angle unconformity at the base of the Main Reef. Sequence I was deposited during a period of highstand of sea-level, Sequence II during a period of relative lowstand, and Sequence III during a period of relative highstand coupled with high rates of sediment supply. Isopach, depofacies and palaeocurrent analyses indicate that strata in the western to northwestern parts of the basin were deposited under more proximal sedimentary conditions compared to those in the central or southeastern parts of the basin. There is little relationship between the present outline of the basin and the distribution of depofacies or isopachs of sequences, and it is therefore concluded that the original sedimentary basin was significantly larger in areal extent. Depofacies and thickness distribution, as well as synsedimentary deformation of strata, indicate that the basin was most probably of flexural tectonic origin. These findings strongly support deposition in a wide, shallow, and rather stationary foreland basin, with an axial zone towards the west/northwest and a low amplitude peripheral bulge to the east/southeast. Such shallow foreland basins, with abundant sediment bypassing, are thought to be associated with windward-facing orogenic fronts. High rates of erosion along such fold-thrust belts lead to ineffective loading and advancement of the orogenic front, as well as an oversupply of sediment.

Petrography and Diagenesis of Thin-Bed Reservoirs from the Eastern Folded Belt of Bangladesh

The main purpose of the study is to identify the thin-bed reservoirs of the Eastern Folded Belt (Sylhet and Bandarban) and characterize them with diligence. A detailed qualitative and quantitative analysis has been carried out. It is based on thin-section petrographic analyses of sandstone samples. These samples are from the reservoir horizons of the Sylhet region and Bandarban region fields. The purpose of this analysis is to characterize the textural and mineralogical properties. Additionally, it aims to evaluate the post-depositional diagenetic changes. The results obtained from the field and laboratory analysis are studied extensively to characterize the thin-bed reservoirs. Samples from the Sylhet area are medium-coarse-grained, fairly sorted, tight packing, submature-mature sublithic characteristics. Contrarily, samples from the Bandarban region are mature-submature sublithic arenites, which are fine-medium-grained, moderately well-sorted, and moderately loosely packed. Despite the similarity of the detrital elements (quartz, feldspar, lithic grains, mica, etc.) in the two areas, silica cementation is more frequent in Sylhet region samples than early carbonate cementation in Bandarban region samples. Comparatively speaking, the sediments in the Sylhet region are more compact than those in the Bandarban region. The most important outcome of this study is that the thin bed of the unconventional reservoir and the conventional reservoir are in close proximity. The Thin-bed reservoir units of the Eastern Folded Belt are found to be medium to fine-grained and well sorted, with frequent alteration of sand-shale with the prevalence of parallel bedded sandstone. Average porosity is 4% to 12%, and pore spaces are interconnected. So, the permeability rate is good enough to flow the hydrocarbon through these pore spaces. Most importantly, the thin bed and tight reservoir (average porosity 4% to 12%, but pore spaces are not interconnected) are not more prominent than 1 meter or 2 meters. Subsequently, though the vertical thickness is not so high, they keep up a momentous tirelessness of horizontal progression. On the contrary, at whatever point it comes to a conventional reservoir, the vertical thickness is higher than that of the unconventional reservoir. But their lateral persistence is not as long as unconventional ones.

U-Pb detrital zircon age determination and provenance of the lower Karoo succession from the Karoo Research Initiative (KARIN) borehole KWV-1, Eastern Cape Province, South Africa

Abstract In recent years, the maximum age of sedimentation and possible sources of detritus to the sedimentary successions of the Karoo Supergroup has received a lot of interest, with various authors presenting age data from across the main Karoo Basin (MKB). Our paper aims to contribute to this ever-growing geochronological database as we report weighted mean ages for the youngest zircons as well as detrital zircon age distributions for the lower Karoo Supergroup succession sampled from the Centre of Excellence for Integrated Mineral and Energy Resource Analysis (CIMERA)-Karoo Research Initiative (KARIN) drill core KWV-1. A total of 880 near concordant zircon ages were determined using Laser Ablation Quadrupole Inductively Coupled Plasma Mass Spectrometry (LA-Q-ICP-MS) from fifteen samples representing the Dwyka Group, the Collingham-, Ripon-, Fort Brown- and Waterford formations of the Ecca Group and the Koonap Formation of the Beaufort Group as intersected by this ~2 352 m deep research borehole drilled in the southeastern sector of the basin. The weighted mean ages for the youngest zircons calculated for the formations of the Ecca- and Beaufort groups compares with findings reported by other authors and with the ages reported for tuffaceous layers associated with these units. The weighted mean ages for the youngest zircons of the Dwyka Group reflect the age of the youngest source area and do not aid in constraining the maximum age of deposition. A significant change in detrital zircon age distribution was noted between the Dwyka Group and the overlying formations of the Ecca and Beaufort groups, which we interpret as a change in provenance. The major Meso-to Neoproterozoic detrital zircon age fractions present in the Dwyka Group are attributed to source areas located towards the north and northeast of the MKB, in line with regional ice flow directions. A significant late Carboniferous to Permian detrital zircon age fraction is however observed throughout the formations of the Ecca- and Beaufort groups, with a lesser fraction of older zircon ages. The prevailing youngest age fraction reflects ages associated with magmatic source areas in the Gondwanide Orogeny located towards the south of the MKB at the time of deposition, while the recycling of deformed sedimentary strata of the Cape Supergroup contained in the Cape Fold Belt is considered the source of older detritus. The source of detritus to the MKB remained unchanged during the deposition of the respective formations of the Ecca- and Beaufort groups, despite changes in the depositional environment brough on by regional tectonics.

Potentially toxic metals contamination in stream sediments of Mbal area (Pan-African fold belt, Cameroon)

The Mbal area is situated within the Neoproterozoic Lom Basin in Cameroon. The objective of this paper was to determine the level of contamination and risk associated of potentially toxic metals (PTMs) in stream sediments of Mbal. Sampling was performed by panning and collected sediment were analysed using an inductively coupled plasma-mass spectrometer. The sediment samples showed significant enrichment in mercury, above 10000 ppb. The other transition metals including manganese, zinc, lead were also elevated, ranging from 825 to 1950, 50.80 to 97 and 9.80 to 87.20 ppm, respectively. Multivariate statistical analyses revealed that the enrichment of the PTMs were attributed both to geogenic and anthropogenic sources. Pollution indicators such as degree of contamination, modified degree of contamination and pollution load index yielding 10809.33–200005, 982.67–18182.33 and 0.59–1.18 respectively, suggest high degree of sediments contamination from natural and anthropogenic sources. Geo-accumulation index and enrichment factor revealed moderate to extreme levels of metallic pollution. Potential ecological risk indices show extreme ecological risk index of PTMs suggesting ecological effects to biota and humans in the ecosystem. Mercury, lithology, mining, domestic and agricultural activities were major sources of PTMs pollution. Toxic metals may cause chronic health problems such as cardiovascular diseases, nervous system disorder, kidney damage and gastrointestinal disorder. This study underlines the importance of continuous monitoring and adaptive management for the preservation of the biotic and non-biotic environment. The results may assist mining companies and local populations in setting realistic targets for monitoring and remediation programs.

Neotectonics on the Namuncurá (Burdwood) Bank: unveiling seafloor strike-slip processes along the North Scotia Ridge

The North Scotia Ridge is the offshore morphostructural expression of the left-lateral transcurrent South America–Scotia plate boundary. Several blocks make up the ridge, including the scarcely studied Namuncurá Bank (also known as the Burdwood Bank). We present the first detailed study of active structures on the seafloor of the western Namuncurá Bank from a database of 3D and 2D seismic data, multibeam bathymetry and sub-bottom profiles. This work assesses the architecture, style of deformation and Cenozoic evolution of Namuncurá Bank, where several groups of faults and en echelon folding affect the seabed and shallow sub-bottom. These features compound the northernmost structures associated with a releasing bend, fitting well with a left-lateral Riedel shear model oriented at N74°E, slightly rotated with respect to the present day plate boundary stress regime. The current tectonic scenario started with a main deformational phase in the Neogene, partially distributed by the Malvinas fold–thrust belt, while modern deformation continues to be conditioned by pre-existing structures. This study allows a better understanding of the tectonics of the North Scotia Ridge, a morphostructure that influences the circulation of the Antarctic Circumpolar Current, thus impacting the global climate.

Multiple Fold Earthquakes Recorded by the Paleoseismic Surface Ruptures of Bending-Moment Faults in the Qiulitage Anticline, South Tianshan, China

Abstract Bending-moment faults (BMFs), as a fundamental type of secondary faulting, are intrinsically linked to the primary causative faults within active thrust-fold belts. When these faults thrust through the ground surface, the resulting geomorphic scarps offer the characteristics of local earthquake recurrence. This information helps to fill a gap left by main faults, which often lack coseismic surface ruptures. The Qiulitage anticline where the 1949 M 7¼ Kuqa earthquake occurred is an active thrust-and-fold belt predominantly governed by blind faults. In addition, several typical BMFs extensively crop out as surface scarps in the front of the mountain. Our research concentrates on the well-developed BMF scarps in this region and seeks to explore the recurrence characteristics of paleoearthquakes, which remain inadequately comprehended. Our study reveals that (1) secondary BMF with high enough magnitude can directly generate coseismic ground ruptures, and (2) the seismic behavior of BMFs exhibits a degree of repeatability, potentially linked to the concurrent movement of various BMFs or the solitary action of a single fault. However, the case study presented in this article also highlights the limitation of fold earthquake research because of the swift attenuation of coseismic fault slip as it approaches the ground surface.

Influence of lateral variations in décollement strength on the structure of fold-and-thrust belts: Insights from viscous wedge models

Fold-and-thrust belts (FTBs) evolve over a mechanically weak basal décollement that separates the overlying intensely deformed rocks from the underlying less deformed ones. Although deformation structures in FTBs commonly show lateral continuity, a closer inspection reveals distinctive variations in structural style (e.g., fold style) along and across mountain belts. This study uses laboratory-scale viscous models to investigate the influence of lateral décollement strength variations on the spatio-temporal evolution of strain patterns in FTBs. These experiments, simulating crustal-scale deformation, show notable changes in the mode of tectonic wedge growth, including the topographic evolution and ductile strain pattern distribution. For example, the deformation front propagates faster over weakly coupled décollement than the laterally adjacent strongly coupled segment, leading to along-strike variations of the topographic slope and curved outline of the deformation front. Constrictional strain, characteristic of regions of weak coupling, is transient and replaced by flattening strain beyond ∼20 % bulk shortening. The latter prevails in regions over strong décollement, whereas complex strain histories mark the transition zone between weak and strong décollements. Based on our modelling results, we propose that variations in décollement strength may cause the segmentation of deformation processes and the development of transverse faults in FTBs.

Exploration potential of Papua New Guinea – latest multiclient 3D provides new insight into the underexplored Papuan Basin over the Papuan and Eastern Plateaus

The Gulf of Papua, part of the regional Papuan Basin, is characterised by extensional to passive margin tectonics from the Triassic to Late Oligocene and collisional tectonics from the Late Oligocene until the present day. The basin has experienced rapid clastic deposition in the late Neogene which covers an underlying extensive Miocene carbonate shelf with local bioherms and associated carbonate facies. Underlying the carbonates, an array of deformed and complex rift basins are present, with potential petroleum plays in undifferentiated Mesozoic sediments which onlap basement highs. The Miocene carbonates are the primary exploration targets, along with Pliocene clastic turbidite sediments in the Fly River Delta, Western Gulf of Papua. It is postulated that these were charged by Mesozoic marine–deltaic/terrestrial source rocks that were deposited during the opening of the Coral Sea. The offshore Papuan Basin is underexplored and the Gulf of Papua play types seen in the onshore Aure Fold Belt and offshore Fly River Platform could potentially extend offshore into the Coral Sea area. New broadband Pre‐Stack Depth Migration seismic data covering a part of the Eastern and Papuan Plateaus reveals new insights into the structural development of the region, rift basin geometries, configuration, and association of rift clastics and post-rift carbonates. Internal carbonate features can be observed on the new seismic data set, and new plays in the yet undifferentiated rift sediments of Mesozoic age are proposed in this study.

Sources of the Upper Proterozoic Terrigenous Deposits in the Northwestern Part of the Argun Massif, Central Asian Fold Belt: Results of U–Th–Pb Geochronological and Sm–Nd Isotopic-Geochemical Studies

Sources of the Upper Proterozoic Terrigenous Deposits in the Northwestern Part of the Argun Massif, Central Asian Fold Belt: Results of U–Th–Pb Geochronological and Sm–Nd Isotopic-Geochemical Studies

Influence of subtle inherited basement structures on thin-skinned thrust systems: The Caledonian Thrust Front in Lapland (CaTFLap)

Thin-skinned fold-thrust belts are defined by an extensive detachment surface, “the sole thrust’. The sole thrust is typically assumed to be sub-planar beneath the fold-thrust belt. The model of a planar sole thrust and, by inference, planar basement is often applied rather uncritically, whereas experimental and field studies show that basement topography is not only varied but crucial for the geometrical and kinematic evolution of fold-thrust belts. Basement topography controls on the thrust dynamics remains the least well understood parameter in fold-thrust belts, and more case studies are needed to underpin further understanding. We present field evidence from the well-exposed Caledonian Thrust Front in Lapland, showing the influence of inherited, orogen-perpendicular basement structures on the subsequent structural evolution of the Caledonian sole thrust and its underlying sedimentary rocks. Inherited orogen-perpendicular basement structures created open corrugations in the foreland that directed thrust allochthons and controlled the geometry and strain state of the sole thrust and associated rocks. We propose that even relatively small-scale structures can have a significant control on the geometry and strain state of an evolving thrust system, and that variations in thrust geometries are not simply explained by inversion or coincidental heterogeneous internal thickening (imbrication) of thrust-related units.

A Regional Shallow Décollement at the Front of the Mexican Fold and Thrust Belt: Microstructure of the Santiago Shale

Abstract This contribution analyses the role played by the mechanical properties of a decollément shale layer in the evolution of the Mexican Fold and Thrust Belt (MFTB). The mobility of overpressured shales can accommodate large strains by grain-scale plastic mechanisms, and affect the folding and thrusting styles of the overburden. Research on shale deformation mechanisms is necessary to improve the knowledge of these processes and their influence on the structural style of fold and thrust belts. The ductile behavior of rocks involving grain-scale plasticity was documented in the Jurassic Santiago shale sequence using geological mapping, microstructural observations on thin-oriented sections, and scanning electron microscopy (SEM) imaging. Structural styles such as detachment folding, fault-bend folding, and shale-cored fold-thrusts were observed at the regional scale. At the outcrop scale, the shale developed strong foliation and pencil cleavage, with immersed packstone boudins. Observed structures include thrusting, soft and open folds, and buckle folding. In thin section, the ductile textures include a strong penetrative foliation with lenticular and wavy-parallel laminae composed of carbonates, ribbons of reoriented clays and organic matter (clay+OM), s-c structures, porphyroblasts microtextures, development of oblique cleavage concerning folded foliation (crenulation cleavage), and carbonates dissolution. The Santiago shale shows also evidence of brittle deformation including calcite-filled fractures and cataclastic gouges. X-ray diffraction (XRD) analysis of the clay size fraction suggests that the authigenic calcareous shale was deformed in conditions of the deep diagenetic zone (between 100 and 200°C) and fluid overpressure (>70 MPa). The results help to improve the understanding of ductile microstructure and its role in shale deformation cretaceous cover, promoting the formation of localized fault propagation folds in the overburden. This study aims to open new perspectives in the kinematics and rheology interpretations for this sector of the MFTB, highlighting the role of the décollement layers during the progression of the orogen.

Petrographic characterization of Late Jurassic to Early Cretaceous sandstones in the offshore Bredasdorp Sub-basin, South Africa: An example of a dynamic recycled provenance interpretation

The Mesozoic syn-rift sediments of the Bredasdorp Sub-basin were deposited during the structural inversion of the orogenic Cape Fold Belt (CFB), a crucial time during the break-up of Gondwana. The Late Jurassic to Early Cretaceous non-marine to marine sediments of the Bredasdorp Sub-basin were studied to infer their composition, parent-rock lithologies, tectonic settings and their dynamic response to tectonic perturbations. The knowledge on the provenance terrains in the Bredasdorp Sub-basin is poorly understood and therefore this research shed light on these provenance terrains. Petrographic quantitative analysis revealed that the mineralogical composition of the sediments comprises mainly of litho-quartzose and feldspatho-litho-quartzose sediments. Modal petrographic data indicates a recycled orogen provenance on QFL plots suggesting the occurrence of a collisional provenance terrain. This setting can be interpreted as the reactivation of the CFB structures eroding the Bokkeveld Group (and younger Karoo Supergroup) and the Table Mountain Group metasediments (and Pre-Cape sediments). The shedding of these sediments in the Bredasdorp Sub-basin were coeval with the deposition of the D-V, V-BUSM and BUSM-1AT1 ‘informal’ sequences. Furthermore, an evolving recycled provenance from sedimentaclastic (un-dissected) to basementaclastic (dissected) sediments are proposed and could be a defining characteristic to the enigmatic offshore Jurassic-Cretaceous stratigraphic nomenclature.During the deposition of the D-V Sequence, a spatial variation in provenance due to intrabasinal uplifted fault blocks (possibly reactivated shear zones) occurred between the erosion of the Bokkeveld Group (and Karoo Supergroup) and the Table Mountain Group (TMG) metasediments. The deposition of the V-BUSM Sequence showed a similar compositional trend within their provenance terrain but showed a stronger correlation to an increased quartz and feldspar content. This is possibly due to the erosion of the dominant TMG, which was further supported by the occurrence of distinct type 3 polycrystalline quartz. The deposition of the BUSM-1AT1 sequence saw an increase in plutonic lithic fragments and feldspar content, indicative of an igneous source, which was attributed to the erosion of the proximal Cape Granite Suite. This distinction is crucial in creating a unifying stratigraphic nomenclature for the Jurassic-Cretaceous sequences of South Africa. A dynamic recycled orogen is envisaged for the Bredasdorp Sub-basin and therefore the use of these type of dynamic models should be incorporated in provenance models especially if there is a well-documented geological setting.

Geochemistry of magnetite from Fe-skarn deposits along the central Loei Fold Belt, Thailand

Abstract Fe-deposits in Thailand are mostly located along the Loei Fold Belt in Central Thailand. The study areas, Khao Lek (KL) and Khao Thab Kwai (KTK), have Fe-deposits hosted in contact metamorphized Permian limestone and Permo-Triassic volcanic rocks. Magnetite forms over a wide range of geological conditions and incorporates various trace elements into its cubic spinel structure. The KL and KTK Fe-skarn deposits are mainly composed of massive magnetite. The main discriminator elements for magnetite are characterized by the distribution of Mg, Al, Si, Ca, Ti, V, Cr, Mn, Co, Ni, and Cu. Thus, this study focused on the chemical characteristics of magnetite to identify the origins of the iron ore deposits. This study investigated the trace element chemistry of the magnetite using laser ablation inductively coupled plasma mass spectrometry. The high Ca + Al + Mn and low Ti + V and Ni/Cr + Mn contents of hydrothermal magnetite in the KL and KTK deposits support a typical skarn origin, and the textural and trace element features of the KL and KTK magnetite are analogous to those of typical calcic-Fe skarn deposits worldwide.