Fold Belt Research Articles

A Regional Shallow Décollement at the Front of the Mexican Fold and Thrust Belt: Microstructure of the Santiago Shale

Abstract This contribution analyses the role played by the mechanical properties of a decollément shale layer in the evolution of the Mexican Fold and Thrust Belt (MFTB). The mobility of overpressured shales can accommodate large strains by grain-scale plastic mechanisms, and affect the folding and thrusting styles of the overburden. Research on shale deformation mechanisms is necessary to improve the knowledge of these processes and their influence on the structural style of fold and thrust belts. The ductile behavior of rocks involving grain-scale plasticity was documented in the Jurassic Santiago shale sequence using geological mapping, microstructural observations on thin-oriented sections, and scanning electron microscopy (SEM) imaging. Structural styles such as detachment folding, fault-bend folding, and shale-cored fold-thrusts were observed at the regional scale. At the outcrop scale, the shale developed strong foliation and pencil cleavage, with immersed packstone boudins. Observed structures include thrusting, soft and open folds, and buckle folding. In thin section, the ductile textures include a strong penetrative foliation with lenticular and wavy-parallel laminae composed of carbonates, ribbons of reoriented clays and organic matter (clay+OM), s-c structures, porphyroblasts microtextures, development of oblique cleavage concerning folded foliation (crenulation cleavage), and carbonates dissolution. The Santiago shale shows also evidence of brittle deformation including calcite-filled fractures and cataclastic gouges. X-ray diffraction (XRD) analysis of the clay size fraction suggests that the authigenic calcareous shale was deformed in conditions of the deep diagenetic zone (between 100 and 200°C) and fluid overpressure (>70 MPa). The results help to improve the understanding of ductile microstructure and its role in shale deformation cretaceous cover, promoting the formation of localized fault propagation folds in the overburden. This study aims to open new perspectives in the kinematics and rheology interpretations for this sector of the MFTB, highlighting the role of the décollement layers during the progression of the orogen.

Geochemistry of magnetite from Fe-skarn deposits along the central Loei Fold Belt, Thailand

Abstract Fe-deposits in Thailand are mostly located along the Loei Fold Belt in Central Thailand. The study areas, Khao Lek (KL) and Khao Thab Kwai (KTK), have Fe-deposits hosted in contact metamorphized Permian limestone and Permo-Triassic volcanic rocks. Magnetite forms over a wide range of geological conditions and incorporates various trace elements into its cubic spinel structure. The KL and KTK Fe-skarn deposits are mainly composed of massive magnetite. The main discriminator elements for magnetite are characterized by the distribution of Mg, Al, Si, Ca, Ti, V, Cr, Mn, Co, Ni, and Cu. Thus, this study focused on the chemical characteristics of magnetite to identify the origins of the iron ore deposits. This study investigated the trace element chemistry of the magnetite using laser ablation inductively coupled plasma mass spectrometry. The high Ca + Al + Mn and low Ti + V and Ni/Cr + Mn contents of hydrothermal magnetite in the KL and KTK deposits support a typical skarn origin, and the textural and trace element features of the KL and KTK magnetite are analogous to those of typical calcic-Fe skarn deposits worldwide.

Preliminary Derived DInSAR Coseismic Displacements of the 2022 Mw 5.7 Stolac Earthquake

On 22 April 2022, a Mw 5.7 earthquake was generated near Stolac (Bosnia and Herzegovina). The mainshock was succeeded by several aftershocks, three of which were significant. Two Mb 4.3 earthquakes occurred on 23 April 2022, and a Mw 4.8 earthquake was generated on 24 April 2022. Available data from fault mechanism solutions revealed that the mainshock activated a reverse fault, while the aftershock generated a normal fault with a right-lateral component. The Balkan Peninsula stands as one of the most active geodynamic areas in Central and Eastern Europe due to its location within the collision zone between Eurasian and African tectonic plates and the Anatolian microplate. Recorded earthquakes in Bosnia and Herzegovina are related to the energy generated by the subduction of the African tectonic plate under Eurasia. Furthermore, the seismicity of Bosnia and Herzegovina, particularly its southern part, is profoundly influenced by the subduction of the Adriatic microplate under the Dinarides. The Dinarides are a mainly fold and thrust belt that extends from the Southern Alps in the northwest to the Hellenides in the southeast and make dominant the tectonic system of Bosnia and Herzegovina. In this study, two pairs of SAR images obtained from the Sentinel-1 satellite mission were utilized to generate satellite LOS surface displacements using the DInSAR method. Moreover, LOS displacements were decomposed into vertical and east–west horizontal components by combining ascending and descending satellite orbits. Ultimately, the InSAR results were analyzed and compared with the data obtained from the CROPOS CORS GNSS station in Metković (MET3).

An Appraisal of Geoheritage Potential: From The Delhi-Aravalli Fold- and The Himalayan Fold-Thrust Belts to the Coastal Plains of India

An Appraisal of Geoheritage Potential: From The Delhi-Aravalli Fold- and The Himalayan Fold-Thrust Belts to the Coastal Plains of India

Influence of subtle inherited basement structures on thin-skinned thrust systems: The Caledonian Thrust Front in Lapland (CaTFLap)

Thin-skinned fold-thrust belts are defined by an extensive detachment surface, “the sole thrust’. The sole thrust is typically assumed to be sub-planar beneath the fold-thrust belt. The model of a planar sole thrust and, by inference, planar basement is often applied rather uncritically, whereas experimental and field studies show that basement topography is not only varied but crucial for the geometrical and kinematic evolution of fold-thrust belts. Basement topography controls on the thrust dynamics remains the least well understood parameter in fold-thrust belts, and more case studies are needed to underpin further understanding. We present field evidence from the well-exposed Caledonian Thrust Front in Lapland, showing the influence of inherited, orogen-perpendicular basement structures on the subsequent structural evolution of the Caledonian sole thrust and its underlying sedimentary rocks. Inherited orogen-perpendicular basement structures created open corrugations in the foreland that directed thrust allochthons and controlled the geometry and strain state of the sole thrust and associated rocks. We propose that even relatively small-scale structures can have a significant control on the geometry and strain state of an evolving thrust system, and that variations in thrust geometries are not simply explained by inversion or coincidental heterogeneous internal thickening (imbrication) of thrust-related units.

Petrographic characterization of Late Jurassic to early Cretaceous sandstones in the offshore Bredasdorp sub-basin, South Africa: An example of a dynamic recycled provenance interpretation

The Mesozoic syn-rift sediments of the Bredasdorp Sub-basin were deposited during the structural inversion of the orogenic Cape Fold Belt (CFB), a crucial time during the break-up of Gondwana. The Late Jurassic to Early Cretaceous non-marine to marine sediments of the Bredasdorp Sub-basin were studied to infer their composition, parent-rock lithologies, tectonic settings and their dynamic response to tectonic perturbations. The knowledge on the provenance terrains in the Bredasdorp Sub-basin is poorly understood and therefore this research shed light on these provenance terrains. Petrographic quantitative analysis revealed that the mineralogical composition of the sediments comprises mainly of litho-quartzose and feldspatho-litho-quartzose sediments. Modal petrographic data indicates a recycled orogen provenance on QFL plots suggesting the occurrence of a collisional provenance terrain. This setting can be interpreted as the reactivation of the CFB structures eroding the Bokkeveld Group (and younger Karoo Supergroup) and the Table Mountain Group metasediments (and Pre-Cape sediments). The shedding of these sediments in the Bredasdorp Sub-basin were coeval with the deposition of the D-V, V-BUSM and BUSM-1AT1 ‘informal’ sequences. Furthermore, an evolving recycled provenance from sedimentaclastic (un-dissected) to basementaclastic (dissected) sediments are proposed and could be a defining characteristic to the enigmatic offshore Jurassic-Cretaceous stratigraphic nomenclature.During the deposition of the D-V Sequence, a spatial variation in provenance due to intrabasinal uplifted fault blocks (possibly reactivated shear zones) occurred between the erosion of the Bokkeveld Group (and Karoo Supergroup) and the Table Mountain Group (TMG) metasediments. The deposition of the V-BUSM Sequence showed a similar compositional trend within their provenance terrain but showed a stronger correlation to an increased quartz and feldspar content, possibly because of the erosion of the dominant TMG, which was further supported by the occurrence of distinct type 3 polycrystalline quartz. The deposition of the BUSM-1AT1 sequence saw an increase in plutonic lithic fragments and feldspar content, indicative of an igneous source, which was attributed to the Cape Granite Suite. This distinction is crucial in creating a unifying stratigraphic nomenclature for the Jurassic-Cretaceous sequences of South Africa. A dynamic recycled orogen is envisaged for the Bredasdorp Sub-basin and therefore the use of these type of dynamic models should be incorporated in provenance models especially if there is a well-documented geological setting.

Fault Structure Reconstruction From Magnetic Anomalies Using an Improved Backtracking Search Optimization Algorithm

AbstractFault structure reconstruction is an important aspect of magnetic prospecting as it contributes to understanding tectonic history, hazard assessment, and infrastructure planning. Metaheuristics have proven useful in estimating fault structure parameters from geophysical anomalies. Recently, a modified version of the Backtracking Search Optimization Algorithm (BSA), named mBSA, has been proposed that combines mutation steps of BSA and Differential Evolution (DE) algorithms to achieve a better balance between exploration and exploitation. Here, we present imBSA as an efficient approach that builds on the improvements of mBSA. It uses an adaptive amplitude control factor in the mutation step derived from a normally distributed random number obtained via an exponential function. The performances of these approaches were tested on some widely used benchmark functions such as Rosenbrock, Rastrigin, Griewank, and Himmelblau. Synthetic magnetic fault anomalies were evaluated with and without noise, as well as three real anomalies from the Dehri (India), Perth Basin, and Lachlan Fold Belt (Australia). Prior to the optimizations, the solvability of the model parameters was examined using some error topography images. The obtained solutions in the synthetic cases were evaluated using principal component analysis. In addition, a novel visualization option for high‐dimensional optimization problems was introduced. The experiments showed that imBSA has a faster convergence rate and better optimization statistics compared to BSA and mBSA. Therefore, it is believed to be an efficient and good alternative tool to widely used metaheuristics such as Particle Swarm Optimization and DE in explaining geophysical anomalies and optimization problems in other geoscientific disciplines.

Structural Evolution of the Northern Agrio Fold and Trust Belt (∼37°30′S), Neuquén Basin, Argentina, Derived From Low‐Temperature Multi‐Thermochronometry

AbstractThe Agrio Fold and Thrust Belt (FTB), situated in the Southern Central Andes at 37–39°S, underwent two phases of contractional deformation: Late Cretaceous‐Eocene and middle‐late Miocene. Despite advances in understanding its tectonic history, many questions persist regarding the timing and activity of specific structures during these deformation phases. By combining low‐temperature multi‐thermochronometry, inverse thermal models and field structural data, we present a new thermal‐structural history for the northern Agrio FTB. Our findings unveil an initial cooling event between approximately 85–75 Ma and 55–50 Ma, involving cooling rates of 1.1–2°C/Ma and vertical displacement rates from 0.07 to 0.12 km/Ma. This slow event, confined to the inner zone, is associated with the growth of the basement‐cored Manzano anticline. Additionally, still in the inner zone of the Agrio FTB, a second and faster cooling event from ∼15–10 Ma to 0 Ma, marked by a cooling rate of 7°C/Ma and a vertical displacement rate ranging from 0.11 to 0.17 km/Ma, results from in‐sequence thick‐skinned thrusting at depth. In the outer zone of the FTB, only the younger cooling event from 15–10 Ma to 0 Ma is evident, with a cooling rate of 8.8°C/Ma and a vertical displacement rate ranging from ∼0.14 to 0.26 km/Ma, attributed to displacement along the basement‐involved Las Yeseras thrust. Furthermore, Apatite Fission Track (AFT) ages of detrital grains in the Tralalhué conglomerates support the maximum depositional age for these synorogenic strata to be between 14.1 and 9.2 Ma.

Digital topographic analysis and lineament interpretation south of the Lena Delta, North Siberia: Landscape expression of its tectonic activity

This study applies semi-automated techniques to analyze the landforms, morphostructure, and geology of the Kharaulakh and Chekanovsky sectors, south of the Lena Delta, northern Siberia. High-resolution data, including TanDEM-X 30 m spatial resolution Digital Elevation Models (DEM), 2 m spatial resolution ArcticDEM Digital Surface Models (DSM), and Sentinel-2 satellite imagery, serve as the basis for the analysis. Digital terrain classification and identification of tectonic lineaments are performed using the Benthic Terrain Modeler (BTM) and Linear Extraction (LINE) algorithm, respectively. Additionally, a hypsometric analysis is conducted to assess areas of potential neotectonic activity. 873 lineaments are identified, primarily in NE-SW and E-W orientations. NW-SE lineaments perpendicular to the lithological and fold belt strikes in the Kharaulakh Ridge suggest inheritance from original depositional settings or later compressional tectonics, now appearing as valleys and weak zones facilitating erosion and river incision. Longer N-S or NNW-SSE lineaments in the Kharaulakh Sector are associated with thrust sheets of the Verkhoyansk fold-and-thrust belt and Cenozoic graben structures linked to the formation of the Laptev Sea Rift System and ongoing regional deformation. The Chekanovsky Sector, marked by epiplatform blocks and hills, presents a dissected plateau with steep valleys. Here, high hypsometric integral values are attributed to compression and uplift near the southwestern boundary of the Laptev Sea Microplate.

Depositional setting and sequence stratigraphy of Upper Mississippian coal-bearing paralic cyclothems in Upper Silesian foreland

The upper Serpukhovian Poruba Member (c. 325–324 Ma) is a coal-bearing “paralic” succession deposited in the Upper Silesian Coal Basin located along the eastern foreland of the Moravo-Silesian segment of the Variscan fold and thrust belt. The basin formed an >150 km long, tectonically controlled embayment open to the north and northeast, with estuarine circulation, predominance of fluvial discharge and a limited tidal influence. A high-accommodation depocentre (possibly up to 1100 m/Myr) was filled by shallowing-upward successions related to the progradation of river dominated (bay-head) deltas, with subordinate fluvial and marine sediments. These strata form two orders of transgressive-regressive cycles, or genetic sequences, both overlapping with the Milankovitch band. Intervals of maximum transgression, marked by marine or brackish faunal horizons, immediately overlie coal beds, suggesting non-accretionary transgression in a low energy setting. Six medium-term genetic sequences (cyclothems) are recognized, each consisting of 4 to 6 elementary sequences and a number of smaller scale units of possible autocyclic origin. The medium-term sequences are attributed to a combined influence of relative sea-level change and changes in sediment input, both possibly as a far field response to Gondwanan glaciation through glacioeustasy and attendant changes in climatic seasonality.

Petrogenesis of metaluminous and peraluminous granitoids from Garga-Sarali zone : evidence of I- and S-type sources (central African fold belt in Cameroon)

The Garga-Sarali granitoids outcrop from a metamorphic basement in the central-eastern part of the Central Cameroonian Domain of the Central African fold belt in Cameroon, and are petrographically very complex. They can be divided into two types : (1) Granodiorites of metaluminous type-I, with a fine-grained porphyritic variant texture, consisting of quartrz + orthoclase + microcline + plagioclase + biotite + zircon + oxides ± apatite; (2) and two-mica granites of hyper-aluminous type-S, with a grainy texture, consisting of the same quartzo + k-feldspars + biotite + cordierite ± apatite. These formations both belong to a calc-alkaline-subalkaline, hyper-potassic to shoshonitic signature, and to the tectonic domains of volcanic arc granites. Their emplacement is intimately linked to a crustal parent magma (metagrauwackes and metabsalt-tonalites) that imbibed through the openings in the post-orogenic pan-African lithospheric constraints. Their La/Yb ratio, with (La/Sm)n ranging from 2.18-5.75 ppm, reflects their richness in LREE, and the average Eu/Eu*=0.666 ppm suggests that the residual magma was supersaturated with silica.

A new look at the geodynamic development of the Ediacaran–early Cambrian forearc basalts of the Tannuola-Khamsara Island Arc (Central Asia, Russia): Conclusions from geological, geochemical, and Nd-isotope data

Abstract Oceanic igneous rocks throughout the Altai-Sayan Fold Belt (ASFB) in central-southern Siberia are often considered to be late Precambrian–early Paleozoic accreted elements of oceanic crust – often of uncertain paleogeographic or geodynamic origin. We explore the role of suprasubduction zone settings in the formation of different ASFB terranes. Our study offers a non-accretionary perspective on the tectonomagmatic development of basalt-bearing units in the ASFB on the example of the forearc terrane of the Ediacaran–early Cambrian Tannuola-Khamsara island arc (herein termed Sayan-Tuvan forearc zone). We describe the geochemistry, structural geology, and stratigraphic relations of basalts of the Aldynbulak, Uttug-Khaia, and Chingin formations, which are integral parts of the Sayan-Tuvan forearc zone. The Aldynbulak basalt samples mainly fall in the compositional fields of ocean island basalts and enriched mid-ocean ridge basalts (E-MORB) and likely derived from a deep mantle source. The Uttug-Khaia and Chingin basalts are N- and E + T-MORB-like basalts, carrying forearc geochemical signatures. Specifically, the Chingin Formation contains boninite dikes and is associated with a boninite-bearing ophiolite. Boninites are commonly associated with forearc magmatism and thus a forearc formation setting is likely. Tectonic and stratigraphic considerations imply that the Aldynbulak basalts formed first, followed by the Uttug-Khaia and later the Chingin basalts and boninites. A schematic model, involving decompression melting of the mantle, is proposed for the development of the studied forearc basalt suites that are linked with the growth of the Tannuola-Khamsara island arc system 580–540 million years ago.

Exploration history of the igneous reservoirs of the Rio Grande Valley (Mendoza), Neuquén Basin (Argentina)

Abstract Oil seeps related to igneous rocks in the Neuquén Basin have been known since pre-Hispanic times (sixteenth century) and have been explored in the southern Mendoza province since the late nineteenth century. In the 1980s, YPF (Yacimientos Petrolíferos Fiscales) began the exploration of igneous rocks as hydrocarbon reservoirs in the Río Grande Valley area. The possible productivity of these ‘unconventional’ reservoirs was recognized by studying outcrops and well data of sills and dykes emplaced in different formations of the fold and thrust belt of the northern Neuquén Basin. Mud-logging control and evaluations with drill stem tests (DST) were decisive to define these reservoirs as prospective. From petrographical reports on samples from outcrops and cores, six lithological types could be distinguished in the igneous units of this region. Recent works confirm that this volcanism belongs to two predominant cycles: from the late Oligocene to the Miocene (‘Molle’) and from the Middle to upper Miocene (‘Huincán’). Although in igneous reservoirs it is difficult to forecast the estimated ultimate recovery (EUR), sills that crosscut the source rocks of the Vaca Muerta and Agrio formations demonstrate surprisingly high production rates, although the number of wells for the complete development is always difficult to establish.

Neotectonics on the Namuncurá (Burdwood) Bank: Unveiling seafloor strike-slip processes along the North Scotia Ridge

The North Scotia Ridge is the offshore morphostructural expression of the left-lateral transcurrent South America-Scotia Plate Boundary. Several blocks compose the ridge, including the scarcely studied Namuncurá Bank (NB, also known as Burdwood). We present the first detailed study of active structures on the seafloor of the western NB from a database of 3D and 2D seismic data, multibeam bathymetry, and sub-bottom profiles. This work assesses the architecture, style of deformation and Cenozoic evolution of NB, where several groups of faults, and en echelon folding, affects the seabed and shallow sub-bottom. These features compound the northernmost structures associated with a releasing bend, fitting well with a left-lateral Riedel shear model oriented at N74°E, slightly rotated with respect to the present-day plate boundary stress regime. The current tectonic scenario started with a main deformational phase in the Neogene, partially distributed by the Malvinas Fold-Thrust Belt, while modern deformation continues to be conditioned by pre-existing structures. This study allows for a better understanding of the tectonics of the North Scotia Ridge, a morphostructure that influences the circulation of the Antarctic Circumpolar Current thus impacting the global climate.

The In-Ga-Sb association of the post-Variscan Zn-Pb-Ag vein deposit at Lautenthal, Upper Harz Mountains, Germany: sphalerite mineral chemistry

AbstractThe Lautenthal sphalerite-galena vein deposit is part of the world-class Upper Harz Pb-Zn-Ag district in the Harz uplift block of the Paleozoic Variscan fold belt in Germany. Its sphalerite-dominated mineral association was studied using bulk-ore chemistry, electron probe microanalysis, and laser ablation-ICP-mass spectrometry. Gallium and locally In are the main high-tech-relevant trace elements hosted by sphalerite, with up to 150 ppm Ga and up to 380 ppm In in hand-picked sphalerite samples (mean In/Zn, 0.70 × 10−3). Ore concentrates (≤ 50 kg) contain up to 65 ppm Ga and up to 109 ppm In (mean In/Zn, 0.36 × 10−3). Accessory Fe-Co-rich gersdorffite-1 occurs in the earlier quartz-sulfide ore stage and Sb-rich gersdorffite-2 in the later carbonate-sulfide stage. Enrichment patterns of In are either defined by overprinting textures in the Fe-richer sphalerite-1 of the earlier stage, or relate to primary growth zoning in Fe-poor sphalerite-2 of the later stage. Using the sphalerite geothermometer GGIMFis, formation temperatures (median) of sphalerite-1 were estimated at ~ 230 °C for the Lautenthal orebody and at ~ 175 °C for the Bromberg orebody, which may indicate lateral T-zonation for the earlier ore stage. Sphalerite-2 data indicate formation temperatures of ~ 185 °C (median). Copper-bearing brines of the carbonate-sulfide stage with assumed temperatures of ~ 250 °C initiated replacement of In-poor sphalerite-1 by chalcopyrite and remobilization of Zn and trace elements. Indium-rich sphalerite-2 occurs associated with calcite and fine-grained galena. A direct spatial or temporal link of ore formation to a magmatic-hydrothermal system is unlikely, which contrasts to In-rich epithermal and tin-polymetallic vein deposits worldwide.

The geologic configuration of the Zagros Fold and Thrust Belt: an overview

AbstractThe Zagros Fold and Thrust Belt (ZFTB) is an outstanding orogen running from eastern Turkey to the Makran area. It is formed as a consequence of the convergence between the Arabian and the Eurasian plates that occurred in the Neogene. This still active and long-lasting process generated a topographic configuration dominated by a series of parallel folding structures which, at places, isolate internal basins. The topographic configuration has, in turn, profoundly influenced the river network evolution, which follows a trellis pattern with the main valleys developed in the synclines and rivers that occasionally cut into anticlines. The peculiar climate, characterised by arid and semi-arid conditions, makes most of the rivers ephemeral, alimented only by short rainfall events. For this reason, the sediments are transported over short distances and deposited in huge alluvial fans. Although the Zagros is one of the most studied belts in the world, its tectonic evolution is far from being fully understood. Debated, for example, are the beginning of collision, the primary deformation mechanism, the evolution of the drainage system, the formation process of the alluvial fans, and the interrelations between landscape, tectonics, and climate. This paper, focusing on the geodynamic, geological, stratigraphic, and topographic configuration of the Zagros belt, is intended to be a compendium of the most up-to-date knowledge on the Zagros and aims to provide the cognitive basis for future research that can find answers to outstanding questions.

Source, distribution patterns and resources potential of selenium in soil of north Pakistan: Revealed by a national-scale geochemical mapping

During national scale geochemical mapping in Pakistan, 69 elements including selenium were analyzed in 2563 stream sediment samples, which filled the gap of selenium distribution in the middle section of Tethyan metallogenic belt. The sampling density was 1–2 sites /100 km2. The geochemical concentration of selenium in the samples range from 0.008 to 6.849 mg/kg with an average value of 0.306 mg/kg. The highest average concentration of Se was found in the Suleiman Fold and Thrust Belt (anomaly III3), whereas the lowest is in WKLT Kohistan-Ladakh Island Arc. The type of soil in Pakistan with the highest Se concentration is entisol. The high selenium anomalies are delineated in the northeast of Quetta, near Muslim Bagh, in Mekhtar-Musa Khel area and its southwest region, north of Quetta and Khushab. Three strong selenium anomalies have also been identified in the northeast of Islamabad, northwest of Rawalpindi and the east of Dargai, respectively. It is suggested that selenium anomalies, having a correlation with elements of Mo, CaO, S, Sr, are mainly caused by geological background of shale, coal and coal-bearing formations. Negative anomalies are mainly distributed in the northern Pakistan, which is mostly consists of bedrocks with no or very thin layer of soil. The product of anomaly intensity and variance are defined as prospecting favorable degree (Pfd). The product of Pfd and area (S) are defined as Quantity of Mineral (Qm). There are two anomalies with the highest Pfd in the east of Quetta city, and the anomaly in the southwest of Kundian ranks third. The selenium anomalies indicate the areas of potential Se enrichment and supply basic data and information for geochemical investigation on a larger scale or selenium relevant research.

Rotation of crustal domains related to Gondwanide deformation in the Neoproterozoic–Cambrian Sauce Chico Complex (Argentina), southwestern margin of the Río de la Plata Craton: Insights from AMS data

The tectonic evolution of the Ventania System fold and thrust belt and the origin of its curvature have been the subject of debates for decades. The Gondwanide Orogeny generated the mylonitization of its Tonian–middle Cambrian basement (i.e., Sauce Chico Complex), accompanied by an intense hydrolysis which produced secondary muscovite (i.e., sericite), and the folding of the overlying Paleozoic sedimentary cover. To evaluate the structural and tectonic evolution of the Ventania System as a result of the interaction of its basement with the Río de la Plata Craton, we studied the anisotropy of magnetic susceptibility (AMS) and rock magnetism on samples of the Sauce Chico Complex. Rock magnetic studies suggest that paramagnetic minerals are the main carriers in the entire Sauce Chico Complex. We suggest that our results reflect secondary muscovite generation due to mylonitization. AMS data reveal that the orientation of the magnetic foliation coincides to a large extent with the rock foliation. However, magnetic and rock foliation orientations are not uniform among the different sampled units, displaying strikes between N 320° (NW) and N 345° (NNW) on average. Localities with different orientations are separated by regional strike-slip structures, referred to as tear faults, which have also been reported and interpreted by previous authors. According to this, we suggest that the variations detected between the orientation of the magnetic and rock foliations of the different basement units may be the result of the rotation of crustal blocks bounded by tear faults. We also propose the existence of a new tear fault not previously recognized. Furthermore, a tear fault of regional character, known as the Sauce Chico Tear Fault, juxtaposes two distinct crustal domains. The differential displacement of such domains could have contributed not only to different structural styles between blocks on both sides of the Sauce Chico Tear Fault, but also to the curved shape of the Ventania System during the progression of the Gondwanide deformation.

Detrital mode and geochemical constraints on the provenance, paleoweathering and tectonic setting of the Surma sediments of Chittagong-Tripura fold belt, Tripura, India

The Chittagong Tripura Fold Belt (CTFB), the folded eastern part of the Bengal Basin is critical for understanding sediments origin and tectonic evolution linked to interactions among the Indian, Eurasian, and Burma plates. The upper Bhuban and Bokabil sediments (Surma Group) from Atharamura anticline, Tripura, India were analyzed using whole-rock geochemistry and petrography to assess their provenance, tectonics, weathering, and depositional milieu in this least explored area. Petrographic study indicates sub-lithic arenite to sub-arkosic composition, with moderate-high quartz, feldspar poor containing metamorphic and sedimentary lithic fragments (Bh Q88.3F3.0L8.6; Bk Q83.5F7.6L8.8), indicating significant recycled orogen source. Geochemical characteristics such as Eu/Eu* (0.6, 0.7), La/Sc (3.2, 2.4), Th/Sc (1.7, 1.4), Th/Co (1.9, 1.8), CIA/WIP (∼1–2), high Hf, Zr/Sc, low K2O/Al2O3 and enriched LREEs, depleted HREEs, and negative Eu anomalies, indicate a recycled provenance of felsic origin that underwent moderate to intense chemical weathering in active continental margin settings. Radiolarian chert, volcanic lithic fragments with Barail-like recycled sediments strongly suggests an additional detritus from uplifted Indo-Burman Ranges from the east. Elevated Th/U and Th/Rb ratios, sediment immaturity and poor sorting suggest first-cycled detritus. This study indicate that Tripura Neogene sediments are chiefly Himalayan-derived, with minor inputs from IBR and Meghalaya Plateau. Sediments were deposited under brackish near shore to shallow marine oxic basins to the west of the uplifted IBR during the Miocene. The study offers insights into regional geological processes, facilitating correlation of foreland Neogene basins and enhances understanding of the geological evolution of the CTFB.

Cenozoic Basin Evolution During Alternating Extension and Shortening in the Southern Central Andes Along the Chile-Argentina Border, 37–38°S

The south-central Chile and Argentina margin experienced a regional phase of extensional tectonics during the Oligocene–early Miocene, forming several basins across the forearc, Andean Cordillera, and retroarc regions. These basins accumulated thick successions of volcanic and sedimentary rocks. Subsequently, Neogene contractional tectonics led to the development of the current Andean Cordillera and the deposition of synorogenic clastic deposits in foreland basins. Traditionally, the Cura Mallín Formation, comprising a lower volcanic unit (CMV) and an upper sedimentary unit (CMS), has been interpreted to have formed during the Oligocene–early Miocene extensional phase. However, some studies propose deposition of the CMS in a foreland basin during the early–late Miocene. To unravel the transition from extensional to contractional tectonics in the Andes of south-central Chile and Argentina, we conducted new geochronological analyses (U-Pb, LA-ICP-MS) and integrated these results with structural, stratigraphic, and sedimentological observations in key sections within the CMS and the overlying Trapa-Trapa Formation in the Principal Cordillera along the Chile-Argentina border (37°–38°S). Our findings indicate that only the lower part of the CMS was deposited in an extensional setting, as evidenced by the presence of an inverted extensional wedge dated at ∼20 Ma. The middle-upper CMS (∼19 to 9 Ma) and contemporaneous units to the east exhibit evidence of syncontractional deformation, suggesting deposition in a foreland basin generated by shortening of the western Principal Cordillera. Around 9 Ma, uplift of the Agrio and Chos Malal fold and thrust belts, east of the Principal Cordillera, led to segmentation of the foreland basin. The Trapa Trapa Formation was deposited in a hinterland basin, with sediment sourced from the east. After ∼6.5 Ma, major contractional deformation shifted westward, resulting in intense folding of the CMS and Trapa Trapa Formation and subsequent thrusting of the western Principal Cordillera over the Central Depression. Our study suggests that deformation progressed toward the eastern foreland during the early to late Miocene and then shifted toward the western forearc during the late Miocene to Pleistocene.