Fluxonium Qubit Research Articles

Parametrically controlled microwave-photonic interface for the fluxonium

Converting quantum information from stationary qubits to traveling photons enables both fast qubit initialization and efficient generation of flying qubits for redistribution of quantum information. This conversion can be performed using cavity-sideband transitions. In the fluxonium, however, direct cavity-sideband transitions are forbidden due to parity symmetry. Here we circumvent this parity selection rule by using a three-wave mixing element to couple the fluxonium to a resonator. We experimentally demonstrate a scheme for interfacing the fluxonium with traveling photons through microwave-induced parametric conversion. We perform fast reset on the fluxonium qubit, initializing it with >95% ground-state population. We then implement controlled release and temporal shaping of a flying photon, useful for quantum state transfer and remote entanglement. The simplicity and flexibility of our demonstrated scheme enables fluxonium-based remote entanglement architectures. Published by the American Physical Society 2024

High-Fidelity Two-Qubit Gates between Fluxonium Qubits with a Resonator Coupler

We take a bottom-up first-principles approach to designing a two-qubit gate between fluxonium qubits for minimal error, speed, and control simplicity. Our proposed architecture consists of two fluxoniums coupled via a resonator. The use of a simple linear coupler has many practical benefits, including the possibility of material optimization for suppressing loss, reducing fabrication complexity, and increasing yield by circumventing the need for Josephson junctions. Crucially, a resonator-as-coupler approach also suggests a clear path to increased connectivity between fluxonium qubits, by reducing capacitive loading when the coupler has a high impedance. After performing analytic and numerical analyses of the circuit Hamiltonian and gate dynamics, we tune circuit parameters to destructively interfere sources of coherent error, revealing an efficient fourth-order scaling of coherent error with gate duration. For component properties from the literature, we predict an open-system average controlled-Z () gate infidelity of 1.86×10−4 in 70 ns. Published by the American Physical Society 2024

Scalable Quantum Processor Based on Superconducting Fluxonium Qubits

Scalable Quantum Processor Based on Superconducting Fluxonium Qubits

Using Bifluxon Tunneling to Protect the Fluxonium Qubit

Encoding quantum information in quantum states with disjoint wave-function support and noise-insensitive energies is the key behind the idea of qubit protection. While fully protected qubits are expected to offer exponential protection against both energy relaxation and pure dephasing, simpler circuits may grant partial protection with currently achievable parameters. Here, we study a fluxonium circuit in which the wave functions are engineered to minimize their overlap while benefiting from a first-order-insensitive flux sweet spot. Taking advantage of a large superinductance (L∼1 μH), our circuit incorporates a resonant tunneling mechanism at zero external flux that couples states with the same fluxon parity, thus enabling bifluxon tunneling. The states |0⟩ and |1⟩ are encoded in wave functions with parities 0 and 1, respectively, ensuring a minimal form of protection against relaxation. Two-tone spectroscopy reveals the energy-level structure of the circuit and the presence of 4π quantum-phase slips between different potential wells corresponding to m=±1 fluxons, which can be precisely described by a simple fluxonium Hamiltonian or by an effective bifluxon Hamiltonian. Despite suboptimal fabrication, the measured relaxation (T1=177±3 μs) and dephasing (T2E=75±5 μs) times not only demonstrate the relevance of our approach but also open an alternative direction toward quantum computing using partially protected fluxonium qubits. Published by the American Physical Society 2024

Dephasing in Fluxonium Qubits from Coherent Quantum Phase Slips

Phase slips occur across all Josephson junctions (JJs) at a rate that increases with the impedance of the junction. In superconducting qubits composed of JJ-array superinductors—such as fluxonium—phase slips in the array can lead to decoherence. In particular, phase-slip processes at the individual array junctions can coherently interfere, each with an Aharonov-Casher phase that depends on the offset charges of the array islands. These coherent quantum phase slips (CQPS) perturbatively modify the qubit frequency, and therefore charge noise on the array islands will lead to dephasing. By varying the impedance of the array junctions, we design a set of fluxonium qubits in which the expected phase-slip rate within the JJ array changes by several orders of magnitude. We characterize the coherence times of these qubits and demonstrate that the scaling of CQPS-induced dephasing rates agrees with our theoretical model. Furthermore, we perform noise spectroscopy of two qubits in regimes dominated by either CQPS or flux noise. We find that the noise power spectrum associated with CQPS dephasing appears to be featureless at low frequencies and not 1/f. Numerical simulations indicate that this behavior is consistent with charge noise generated by charge-parity fluctuations within the array. Our findings broadly inform JJ-array-design trade-offs, relevant for the numerous superconducting-qubit designs employing JJ-array superinductors. Published by the American Physical Society 2024

Flux-pulse-assisted readout of a fluxonium qubit

Much attention has focused on the transmon architecture for large-scale superconducting quantum devices; however, the fluxonium qubit has emerged as a possible successor. With a shunting inductor in parallel to a Josephson junction, the fluxonium offers larger anharmonicity and stronger protection against dielectric loss, leading to higher coherence times as compared to conventional transmon qubits. The interplay between the inductive and Josephson energy potentials of the fluxonium qubit leads to a rich dispersive-shift landscape when tuning the external flux. Here, we propose to exploit the features in the dispersive shift to improve qubit readout. Specifically, we report on theoretical simulations showing improved readout times and error rates by performing the readout at a flux-bias point with large dispersive shift. We expand the scheme to include different error channels and show that with an integration time of 155 ns, flux-pulse-assisted readout offers about a 5-times improvement in the signal-to-noise ratio. Moreover, we show that the performance improvement persists in the presence of finite measurement efficiency combined with quasistatic flux noise and also when considering the increased Purcell rate at the flux-pulse-assisted readout point. We suggest a set of reasonable energy parameters for the fluxonium architecture that will allow for the implementation of our proposed flux-pulse-assisted readout scheme. Published by the American Physical Society 2024

Efficient Initialization of Fluxonium Qubits based on Auxiliary Energy Levels.

Fast and high-fidelity qubit initialization is crucial for low-frequency qubits such as fluxonium, and in applications of many quantum algorithms and quantum error correction codes. In a circuit quantum electrodynamics system, the initialization is typically achieved by transferring the state between the qubit and a short-lived cavity through microwave driving, also known as the sideband cooling process in atomic system. Constrained by the selection rules from the parity symmetry of the wave functions, the sideband transitions are only enabled by multiphoton processes which require multitone or strong driving. Leveraging the flux tunability of fluxonium, we circumvent this limitation by breaking flux symmetry to enable an interaction between a noncomputational qubit transition and the cavity excitation. With single-tone sideband driving, we realize qubit initialization with a fidelity exceeding 99% within a duration of 300ns, robust against the variation of control parameters. Furthermore, we show that our initialization scheme has a built-in benefit in simultaneously removing the second-excited state population of the qubit, and can be easily incorporated into a large-scale fluxonium processor.

Tunable Inductive Coupler for High-Fidelity Gates Between Fluxonium Qubits

The fluxonium qubit is a promising candidate for quantum computation due to its long coherence times and large anharmonicity. We present a tunable coupler that realizes strong inductive coupling between two heavy-fluxonium qubits, each with approximately 50-MHz frequencies and approximately 5-GHz anharmonicities. The coupler enables the qubits to have a large tuning range of XX coupling strengths (−35 to 75 MHz). The ZZ coupling strength is <3 kHz across the entire coupler bias range and <100 Hz at the coupler off position. These qualities lead to fast high-fidelity single- and two-qubit gates. By driving at the difference frequency of the two qubits, we realize a iSWAP gate in 258 ns with fidelity 99.72%, and by driving at the sum frequency of the two qubits, we achieve a bSWAP gate in 102 ns with fidelity 99.91%. This latter gate is only five qubit Larmor periods in length. We run cross-entropy benchmarking for over 20 consecutive hours and measure stable gate fidelities, with bSWAP drift (2σ) <0.02% and iSWAP drift <0.08%. Published by the American Physical Society 2024

Native Approach to Controlled-Z Gates in Inductively Coupled Fluxonium Qubits.

The fluxonium qubits have emerged as a promising platform for gate-based quantum information processing. However, their extraordinary protection against charge fluctuations comes at a cost: when coupled capacitively, the qubit-qubit interactions are restricted to XX interactions. Consequently, effective ZZ or XZ interactions are only constructed either by temporarily populating higher-energy states, or by exploiting perturbative effects under microwave driving. Instead, we propose and demonstrate an inductive coupling scheme, which offers a wide selection of native qubit-qubit interactions for fluxonium. In particular, we leverage a built-in, flux-controlled ZZ interaction to perform qubit entanglement. To combat the increased flux-noise-induced dephasing away from the flux-insensitive position, we use a continuous version of the dynamical decoupling scheme to perform noise filtering. Combining these, we demonstrate a 20ns controlled-z gate with a mean fidelity of 99.53%. More than confirming the efficacy of our gate scheme, this high-fidelity result also reveals a promising but rarely explored parameter space uniquely suitable for gate operations between fluxonium qubits.

High-Sensitivity ac-Charge Detection with a MHz-Frequency Fluxonium Qubit

Owing to their strong dipole moment and long coherence times, superconducting qubits have demonstrated remarkable success in hybrid quantum circuits. However, most qubit architectures are limited to the GHz frequency range, severely constraining the class of systems they can interact with. The fluxonium qubit, on the other hand, can be biased to very low frequency while being manipulated and read out with standard microwave techniques. Here, we design and operate a heavy fluxonium with an unprecedentedly low transition frequency of 1.8 MHz. We demonstrate resolved sideband cooling of the “hot” qubit transition with a final ground state population of 97.7%, corresponding to an effective temperature of 23 μK. We further demonstrate coherent manipulation with coherence times T1=34 μs, T2*=39 μs, and single-shot readout of the qubit state. Importantly, by directly addressing the qubit transition with a capacitively coupled waveguide, we showcase its high sensitivity to a radio-frequency field. Through cyclic qubit preparation and interrogation, we transform this low-frequency fluxonium qubit into a frequency-resolved charge sensor. This method results in a charge sensitivity of 33 μe/Hz, or an energy sensitivity (in joules per hertz) of 2.8ℏ. This method rivals state-of-the-art transport-based devices, while maintaining inherent insensitivity to dc-charge noise. The high charge sensitivity combined with large capacitive shunt unlocks new avenues for exploring quantum phenomena in the 1–10 MHz range, such as the strong-coupling regime with a resonant macroscopic mechanical resonator. Published by the American Physical Society 2024

Characterization of Loss Mechanisms in a Fluxonium Qubit

Characterization of Loss Mechanisms in a Fluxonium Qubit

Millisecond Coherence in a Superconducting Qubit.

Improving control over physical qubits is a crucial component of quantum computing research. Here we report a superconducting fluxonium qubit with uncorrected coherence time T_{2}^{*}=1.48±0.13 ms, exceeding the state of the art for transmons by an order of magnitude. The average gate fidelity was benchmarked at 0.99991(1). Notably, even in the millisecond range, the coherence time is limited by material absorption and could be further improved with a more rigorous fabrication. Our demonstration may be useful for suppressing errors in the next generation quantum processors.

Fast and Robust Geometric Two-Qubit Gates for Superconducting Qubits and beyond

Quantum protocols based on adiabatic evolution are remarkably robust against imperfections of control pulses and system uncertainties. While adiabatic protocols have been successfully implemented for quantum operations such as quantum state transfer and single-qubit gates, their use for geometric two-qubit gates remains a challenge. In this paper, we propose a general scheme to realize robust geometric two-qubit gates in multilevel qubit systems where the interaction between the qubits is mediated by an auxiliary system (such as a bus or coupler). While our scheme utilizes stimulated Raman adiabatic passage (STIRAP), it is substantially simpler than STIRAP-based gates that have been proposed for atomic platforms, requiring fewer control tones and ancillary states, as well as utilizing only a generic dispersive interaction. We also show how our gate can be accelerated using a shortcuts-to-adiabaticity approach, allowing one to achieve a gate that is both fast and relatively robust. We present a comprehensive theoretical analysis of the performance of our two-qubit gate in parametrically modulated superconducting circuits comprising two fluxonium qubits coupled to an auxiliary system.

Time-Dependent Magnetic Flux in Devices for Circuit Quantum Electrodynamics

Time-dependent external flux is ubiquitous across circuit quantum electrodynamics and calls for accurate modeling. Contrary to long-held belief, it is recently predicted---but not yet verified---that the allocation of time-dependent flux cannot be arbitrary in the Hamiltonian. This study provides an experimental verification of this prediction by applying fast flux pulses to a fluxonium qubit and taking measurements of the quantum state following the pulses. Given the widespread use of time-dependent flux in experiments with superconducting qubits, verification of this theory is critical to our understanding of circuit quantum electrodynamics.

Fast High-Fidelity Gates for Galvanically-Coupled Fluxonium Qubits Using Strong Flux Modulation

Long coherence times, large anharmonicity, and robust charge-noise insensitivity render fluxonium qubits an interesting alternative to transmons. Recent experiments have demonstrated record coherence times for low-frequency fluxonium qubits. Here, we propose a galvanic coupling scheme with flux-tunable XX coupling. To implement a high-fidelity entangling iSWAP gate, we modulate the strength of this coupling and devise variable-time identity gates to synchronize required single-qubit operations. Both types of gates are implemented using strong ac flux drives, lasting for only a few drive periods. We employ a theoretical framework capable of capturing qubit dynamics beyond the rotating-wave approximation as required for such strong drives. We predict an open-system fidelity of F>0.999 for the iSWAP gate under realistic conditions.3 MoreReceived 14 July 2022Accepted 18 November 2022DOI:https://doi.org/10.1103/PRXQuantum.3.040336Published by the American Physical Society under the terms of the Creative Commons Attribution 4.0 International license. Further distribution of this work must maintain attribution to the author(s) and the published article's title, journal citation, and DOI.Published by the American Physical SocietyPhysics Subject Headings (PhySH)Research AreasQuantum controlQuantum gatesQuantum information with solid state qubitsPhysical SystemsSuperconducting qubitsQuantum InformationCondensed Matter, Materials & Applied Physics

Granular aluminium nanojunction fluxonium qubit.

Mesoscopic Josephson junctions, consisting of overlapping superconducting electrodes separated by a nanometre-thin oxide layer, provide a precious source of nonlinearity for superconducting quantum circuits. Here we show that in a fluxonium qubit, the role of the Josephson junction can also be played by a lithographically defined, self-structured granular aluminium nanojunction: a superconductor-insulator-superconductor Josephson junction obtained in a single-layer, zero-angle evaporation. The measured spectrum of the resulting qubit, which we nickname gralmonium, is indistinguishable from that of a standard fluxonium. Remarkably, the lack of a mesoscopic parallel plate capacitor gives rise to an intrinsically large granular aluminium nanojunction charging energy in the range of tens of gigahertz, comparable to its Josephson energy. We measure coherence times in the microsecond range and we observe spontaneous jumps of the value of the Josephson energy on timescales from milliseconds to days, which offers a powerful diagnostics tool for microscopic defects in superconducting materials.

Enhancing quantum coherence of a fluxonium qubit by employing flux modulation with tunable-complex-amplitude

We propose to protect fluxonium qubits that are away from half flux quantum against environmental noises, especially flux noise, by adopting a modulated flux with tunable-complex-amplitude. Using open-system Floquet theory, we derive a Lindblad equation and extract decoherent rates for pure-dephasing, excitation and relaxation. After examining intrinsic attributes of the flux driven fluxonium qubit, we put forward an analytic manner to locate dynamical sweet spots for fast and weak driving. Continuous families of dynamical sweet spots are found in the parameter plane of relative amplitude factor and relative phase. Around a family of dynamical sweet spots or between two families of dynamical sweet spots, there exist continuous regions with long coherent times that exceed . Taking advantage of the two noise-insensitive channels: relative amplitude factor and relative phase, a flux driven fluxonium qubit can become immune to flux noises from both the dc and ac flux amplitudes. And the optimal driving amplitudes are no longer isolated at a certain driving frequency, but become continuous. This is in sharp contrast to the usual schemes based on flux modulation with real-amplitude. As a result, there are plenty of manipulating flexibility in our flux driving scheme with tunable-complex-amplitude, which may be useful in logical operations among flux driven fluxonium qubits or other flux qubits.

Microwave-activated gates between a fluxonium and a transmon qubit

We propose and analyze two types of microwave-activated gates between a fluxonium and a transmon qubit, namely a cross-resonance (CR) and a CPHASE gate. The large frequency difference between a transmon and a fluxonium makes the realization of a two-qubit gate challenging. For a medium-frequency fluxonium qubit, the transmon-fluxonium system allows for a cross-resonance effect mediated by the higher levels of the fluxonium over a wide range of transmon frequencies. This allows one to realize the cross-resonance gate by driving the fluxonium at the transmon frequency, mitigating typical problems of the cross-resonance gate in transmon-transmon chips related to frequency targeting and residual $ZZ$ coupling. However, when the fundamental frequency of the fluxonium enters the low-frequency regime below $100\phantom{\rule{0.16em}{0ex}}\mathrm{MHz}$, the cross-resonance effect decreases leading to long gate times. For this range of parameters, a fast microwave CPHASE gate can be implemented using the higher levels of the fluxonium. In both cases, we perform numerical simulations of the gate showing that a gate fidelity above $99%$ can be obtained with gate times between 100 and $300\phantom{\rule{0.16em}{0ex}}\mathrm{ns}$. Next to a detailed gate analysis, we perform a study of chip yield for a surface code lattice of fluxonia and transmons interacting via the proposed cross-resonance gate. We find a much better yield as compared to a transmon-only architecture with the cross-resonance gate as native two-qubit gate.

High fidelity two-qubit gates on fluxoniums using a tunable coupler

Superconducting fluxonium qubits provide a promising alternative to transmons on the path toward large-scale superconductor-based quantum computing due to their better coherence and larger anharmonicity. A major challenge for multi-qubit fluxonium devices is the experimental demonstration of a scalable crosstalk-free multi-qubit architecture with high-fidelity single-qubit and two-qubit gates, single-shot readout, and state initialization. Here, we present a two-qubit fluxonium-based quantum processor with a tunable coupler element. We experimentally demonstrate fSim-type and controlled-Z-gates with 99.55 and 99.23% fidelities, respectively. The residual ZZ interaction is suppressed down to the few kHz levels. Using a galvanically coupled flux control line, we implement high-fidelity single-qubit gates and ground state initialization with a single arbitrary waveform generator channel per qubit.

Cnot Gates for Fluxonium Qubits via Selective Darkening of Transitions

We analyze the cross-resonance effect for fluxonium circuits and investigate a two-qubit gate scheme based on selective darkening of a transition. In this approach, two microwave pulses at the frequency of the target qubit are applied simultaneously with a proper ratio between their amplitudes to achieve a controlled-NOT operation. We study in detail coherent gate dynamics and calculate gate error. With nonunitary effects accounted for, we demonstrate that gate error below $10^{-4}$ is possible for realistic hardware parameters. This number is facilitated by long coherence times of computational transitions and strong anharmonicity of fluxoniums, which easily prevents excitation to higher excited states during the gate microwave drive.