Fluorescence Emission Research Articles

Water-soluble near-infrared AgInS2 quantum dots for Ca2+ detection and bioimaging

Calcium ions (Ca2+) are key players in intracellular signaling as second messengers and play a pivotal role in various physiological processes. In this study, near-infrared water-soluble AgInS2 quantum dots (AIS QDs) for Ca2+ detection were synthesized by a one-step hydrothermal method. The fluorescence quantum yield (PL QY) of the quantum dots was as high as 23.99 %. With low cytotoxicity and good fluorescence properties, as well as short reaction time, the ternary AIS QDs have excellent synthesis efficiency and quantum yield, which are advantageous for Ca2+ detection and bioimaging applications. The fluorescence quenching of the quantum dots showed a clear linear relationship with calcium ion concentration in the range of 0–250 μM (detection limit: 0.65 μM). Confocal imaging experiments demonstrate the excellent biofluorescence imaging capability of AIS QDs. By tuning the Ag/In molar ratio, AIS QDs can achieve fluorescence emission in the near-infrared wavelength band (620–700 nm), and the near-infrared fluorescence imaging has deeper tissue penetration, less tissue absorption and photodamage, and lower interference of spontaneous fluorescence, which further expands the potential of QDs for bioimaging applications.

Computational insights into the underlying mechanism of zinc ion-specificity of the fluorescent probe, BDA-1

Ion specificity is crucial for developing fluorescence probes. Using a recently reported optical sensor (BDA-1) of Zn2+ as a representative, we carried out extensive quantum chemical calculations on its photophysical properties using density function theory. According to the calculated optimized geometries, excitation energies and transition oscillator strengths, the weak fluorescence of BDA-1 observed in experiments is attributed to the suppression of fluorescence emission by efficient internal conversion, rather than the previously proposed photoinduced electron transfer (PET) mechanism. With the addition of Zn2+ or Cd2+ ions, the tetradentate chelates [M:BDA-1-H+]+ (M=Zn, Cd) are produced. According to frontier molecular orbital and interfragment charge transfer analyses of these complexes, PET is preferentially confirmed to occur upon photo-excitation. Notably, as one coordination bond in the excited [Cd:BDA-1-H+]+ complex is significantly weakened in comparison to that of [Zn:BDA-1-H+]+, their molecular orbital compositions in the S1 state are completely different. As a result, absorption and radiation transitions of [Zn:BDA-1-H+]+ both have considerable oscillator strength, while fluorescence radiation from the excited [Cd:BDA-1-H+]+ is doubly suppressed. This difference causes that the fluorescence intensity of BDA-1 is sensitive to the addition of metal ions, and exhibits the zinc ion-specificity.

A ratiometric fluorescence sensor based on Mn doped ZnS QDs for highly selective detection of ascorbic acid

A ratiometric fluorescence sensor based on Mn doped ZnS QDs was designed to detect ascorbic acid with highly selectivity. The synthesized Mn doped ZnS QDs showed a new luminescence performance due to new electron hole recombination center formed in the nanocrystals. The dopant-related luminescence of Mn2+ appeared at 590 nm, and the best dopant-related luminescence effect can be obtained by changing the doping amount of Mn2+ during the synthesis process. Ascorbic acid (AA) is known to be oxidized by Fe3+ to generate dehydroascorbic acid (DHAA). If DHAA combined with o-phenylenediamine (OPD), a fluorescent product quinoxaline DFQ was obtained. Mixing DFQ with Mn doped ZnS QDs, two fluorescence emission appeared at 434 nm and 590 nm. After optimizing the concentration of Fe3+ and OPD, solution pH and reaction time, the results showed a good linear relationship between AA and the ratio of F434/F590. The linear range of this ratiometric fluorescence sensor for detection of ascorbic acid were 0.5–40 μmol·L−1 and 40–80 μmol·L−1, and the detection limit was low to 0.21 μmol·L−1. Compared with the single fluorescence analysis method for AA detection, this work has stronger anti-interference and greatly improved sensitivity and selectivity by ratiometric fluorescence.

A ligand-free hydrogel as a visual fluorescence sensor for detection of rare-earth ions

In this work, a ligand-free luminescent hydrogel is used as a visual ratiometric fluorescence sensor to detect rare-earth (RE) ions for the first time. This hydrogel is easy to be prepared, environmentally friendly, and has high luminescent efficiency. It is found that the fluorescence intensity and emission color of the hydrogel immediately change significantly when solution of active RE3+ ions is added without any treatment. According to the linear relationship between the fluorescence intensity ratio and the concentration of RE3+ solutions, the detection limit is calculated to be as low as 0.94 μM. The detection of RE ions has strong anti-interference to other ions. Therefore, this sensor can be used for preliminary field exploration of RE ores and detection of waste containing small amounts of RE ions.

Analysis of fluorescence changes in different sections of green bell pepper (Capsicum annuum L.) over storage periods

To prevent food losses, particularly those associated with financial losses, researchers are still working to determine the index for monitoring the freshness of green peppers during storage. This research aimed to examine the feasibility of using fluorescence spectroscopy to determine the freshness index. It was established the time series fluorescence properties were from various parts of green bell pepper (Capsicum annuum L.) during storage. For each evaluation, three measurements of the Emission and Excitation Matrix (EEM) fluorescence were carried out through the period of 16 days of storage at 4ºC. No difference was observed in color and chlorophyll content throughout the storage of green pepper. However, firmness was the destructive analyses more sustainable to determine freshness compared to the others, observing changes as of day 12 after harvest. The fluorescence emission peak at 450 nm on the excitation of 360 nm was observed to be potential as the freshness index showing the correlation with texture parameter showing R2 = 0.82. Therefore, this is a novel technique that should be further studied to optimize its use in the food industry to monitor fruits and vegetables during their preservation and to prevent food losses.

Design and characterization of a Near-Infrared Fluorescent Probe SCN for selective detection of Hydrogen Sulfide (H2S) in living systems and food samples

Hydrogen sulfide (H₂S) is a colorless compound with a characteristic rotten egg odor that serves as a significant indicator of pathological processes and food spoilage. In this study, we developed a novel probe SCN for H2S detection. When exposed to H2S, the Probe SCN selectively cleaves the oxygen-nitrile bond, resulting in a strong red fluorescence emission at 662 nm, which can be attributed to recovery from the intramolecular charge transfer (ICT) effect. This probe demonstrated outstanding features, including a substantial Stokes shift (236 nm) and a low detection limit of 0.41 μM. We successfully used the Probe SCN to detect H2S changes in common food samples such as eggs, fish, pork, and shrimp. Furthermore, the Probe SCN can also be used to detect H2S in living cells and mice. These findings confirmed the effectiveness of the SCN probe as a real-time tool for H2S detection and related imaging applications.

A new insight into the luminescence mechanism of a FRET-ICT-based ratiometric and colorimetric pH probe

Recently, a ratio fluorescent probe molecule BP was designed and synthesized to detect pH in living cells. However, few have conducted in-depth theoretical exploration of the detailed transfer process. In this paper, the luminescence mechanisms of BP and BPH were studied with the results of geometric optimization structures and molecular orbitals at the CAM-B3LYP/TZVP computational level. It was found that a fluorescence resonance energy transfer (FRET) process occurs in the excited state of BP molecules, and the final fluorescence emission is attributed to the intramolecular charge transfer (ICT) of the acceptor styryl pyridine ring. Meanwhile, the fluorescence emission of BPH molecules is due to the ICT process caused by the local excitation process of the acceptor group protonated styryl pyridine ring itself. Therefore, this luminescence is a FRET “ON-OFF” combined ICT process, not like the FRET “OFF-ON” mechanism which the experiment suspected. Our work illustrates a specific FRET combined ICT process of probes BP and BPH from a theoretical perspective which could provide theoretical guidance for the future design of similar fluorescent probes.

Toward High Contrast and Noninvasive Fluorescence Switches via an O-Fused Ring 5,7-Dihydroxy-4-methyl-2,2,3-triphenylbenzofuran-6(2H)-one Strategy.

An unprecedented O-fused ring 5,7-dihydroxy-4-methyl-2,2,3-triphenylbenzofuran-6(2H)-one (3) was first time synthesized. Further, a series of novel dialkyl/fluoroalkyl derivatives of compound 3, 5,7-dialkoxy/fluoroalkoxy-4-methyl-2,2,3-triphenylbenzofuran-6(2H)-one, were obtained with noninvasive fluorescence switching characteristics and aggregation-induced emission properties. Compared with fluoroalkyl derivatives, the alkyl analogs exhibited a significant bathochromic shift in solid-state fluorescence emission. Notably, these noninvasive fluorescent molecular switches could be facilely tuned through light and heat stimulation, which successfully achieved high contrast and reversible fluorescent emission between orange and yellow endowing them with potential applications in data encryption materials. In addition, the single crystal data of compounds 3 and 7-CF3 displayed weak intermolecular interactions in different directions, resulting in twisted conformation and antiparallel slip stacking. Interestingly, the polymer dimethyl silicone film doped with 7-C3F7 also showed an evident light-responsive behavior, meeting the criterion for fluorescent materials in the optical field.

Rapid cyprinid herpesvirus 3 detection using loop-mediated isothermal amplification (LAMP) combined with gold nanoprobes and SYBR safe

As an etiological agent of a notifiable and emerging disease, Cyprinid herpesvirus 3 (CyHV-3 or koi herpesvirus, KHV) is a highly risky factor that affects koi and common carp yield through increasing the mortality rates. In the current study, a highly rapid and sensitive technique was established to detect CyHV-3 with the help of loop-mediated isothermal amplification (LAMP) method with dual visualizing indicators (SYBR safe and gold nanoparticle probes; AuNP-probes). Six specific primers were used to amplify the thymidine kinase (TK) of CyHV-3 using a LAMP reaction of 45 min at 65 °C along with detecting the products through visual inspection via hybridization at 65 °C for 20 min with a functionalized thiol-AuNP probe. A closed-tube LAMP-SYBR safe assay was also developed under the same condition without AuNP probe. The amplification of KHV-LAMP products were evaluated by the naked eye, through fluorescent emission of LAMP-SYBR safe dye-complex and colorimetric aggregate of LAMP product in the presence of AuNP probe. Furthermore, quantitative measurement was applied to the LAMP-AuNPs assay, using the spectral shift assay. The detection limit was 1.25 fentograms DNA which can compete the latest techniques available. The proposed technique yielded negative outcomes with DNA template from other viruses such as CyHV-1 and CEV. The LAMP-SYBR safe and LAMP-AuNPs assays introduced in this article were very sensitive, fast, and reliable diagnostic tools for the detection of CyHV-3.

A single-particle mechanofluorescent sensor

Monitoring mechanical stresses in microchannels is challenging. Herein, we report the development of a mechanofluorescence sensor system featuring a fluorogenic single polydiacetylene (PDA) particle, fabricated using a co-flow microfluidic method. We construct a stenotic vessel-mimicking capillary channel, in which the hydrodynamically captured PDA particle is subjected to controlled fluid flows. Fluorescence responses of the PDA particle are directly monitored in real time using fluorescent microscopy. The PDA particle displays significant nonlinear fluorescence emissions influenced by fluid viscosity and the presence of nanoparticles and biomolecules in the fluid. This nonlinear response is likely attributed to the torsion energy along the PDA’s main chain backbone. Computational fluid dynamic simulations indicate that the complete blue-to-red transition necessitates ~307 μJ, aligning with prior research. We believe this study offers a unique advantage for simulating specific problematic regions of the human body in an in vitro environment, potentially paving the way for future exploration of difficult-to-access areas within the body.

Modulating Charge-Transfer Excited States of Multiple Resonance Emitters via Intramolecular Covalent Bond Locking.

Advanced multiple resonance thermally activated delayed fluorescence (MR-TADF) emitters with high efficiency and color purity have emerged as a research focus in developing ultra-high-definition displays. Herein, we disclose an approach to modulate charge-transfer excited states of MR emitters via intramolecular covalent bond locking. This strategy can promote the evolution of strong intramolecular charge transfer (ICT) states into weak ICT states, ultimately narrowing the full-width at half-maximum (FWHM) of emitters. To modulate the ICT intensity, two octagonal rings are introduced to yield molecule m-DCzDAz-BNCz. Compounds m-CzDAz-BNCz and m-DCzDAz-BNCz exhibit bright light-green and green fluorescence in toluene, with emission maxima of 504 and 513 nm, and FWHMs of 28 and 34 nm, respectively. Sensitized organic light-emitting diodes (OLEDs) employing emitters m-CzDAz-BNCz and m-DCzDAz-BNCz exhibit green emission with peaks of 508 and 520 nm, Commission Internationale de L'Eclairage (CIE) coordinates of (0.12, 0.65) and (0.19, 0.69), and maximum external quantum efficiencies (EQEs) of 30.2% and 32.6%, respectively.

W-Shaped π-Extended Double Undecabenzo[7]helicene.

A chiral W-shaped fully π-extended double [7]helicene (ED7H) has been synthesized and fully characterized. It displays fluorescence emission (λem = 636 nm) with a quantum yield (Φf) of 0.10. In comparison to its X-shaped and monomict π-extended [7]helicene analogues, enantiopure W-shaped ED7H exhibited superior chiral optical characteristics, including distinct circular dichroism signals from 400 to 650 nm, a good dissymmetric emission factor |glum| of 4 × 10-3, and a circularly polarized luminescence brightness value BCPL of 42 M-1 cm-1.

Multicolor Tuning of Perylene Diimides Dyes for Targeted Organelle Imaging In Vivo.

The adjustment of the emission wavelengths and cell permeability of the perylene diimides (PDI) for multicolor cell imaging is a great challenge. Herein, based on a bay-region substituent engineering strategy, multicolor perylene diimides (MCPDI) were rationally designed and synthesized by introducing azetidine substituents on the bay region of PDIs. With the fine-tuned electron-donating ability of the azetidine substituents, these MCPDI showed high brightness, orange, red, and near infrared (NIR) fluorescence along with Stokes shifts increasing from 35 to 110 nm. Interestingly, azetidine substituents distorted to the plane of the MCPDI dyes, and the twist angle of monosubstituted MCPDI was larger than that of disubstituted MCPDI, which might efficiently decrease their π-π stacking. Moreover, all of these MCPDI dyes were cell-permeable and selectively stained various organelles for multicolor imaging of multiple organelles in living cells. Two-color imaging of lipid droplets (LDs) and other organelles stained with MCPDI dyes was performed to reveal the interaction between the LDs and other organelles in living cells. Furthermore, a NIR-emitting MCPDI dye with a mitochondria-targeted characteristic was successfully applied for tumor-specific imaging. The facile synthesis, excellent stability, high brightness, tunable fluorescence emission, and Stokes shifts make these MCPDI promising fluorescent probes for biological applications.

PH-induced fluorescent active sodium alginate-based ionically conjugated and REDOX responsive multi-functional microgels for the anticancer drug delivery

A sodium alginate (Alg) based REDOX (reduction and oxidation)-responsive and fluorescent active microgel was prepared via water in oil (w/o) mini-emulsion polymerization technique. Here, we initially synthesized sodium alginate-based disulfide cross linked microgels and after that those microgels were tagged with rhodamine amine derivative (RhB-NH2) by ionic interaction to get the pH-responsive fluorescent property. Functionalized microgels were characterized using 1H NMR, FTIR, DLS, HRTEM, FESEM, UV–vis, and fluorescence spectroscopy analyses. Presence of the REDOX-responsive disulfide-containing crosslinkers in the microgels enhances the release of doxorubicin (DOX), an anti-cancer drug in the reducing environment of the cancer-cells (simulated). Existence of the rhodamine-amine derivative in the microgels triggers the pH-dependent fluorescence property by showing fluorescence emission at 560–580 nm at pH 5.5 (cancer cell pH). The cytotoxicity of the biopolymer based microgel was assessed over both cancerous HeLa (IC50 100 µg/mL) and non-cancerous MDCK (IC50 200 µg/mL) cells by MTT assay which showed the synthesized microgel is non-toxic whereas DOX-loaded microgels showed significant toxicity. FACS and cell uptake (in vitro) analyses were conducted to understand the cell apoptosis cycle and behavior of the cancer cells in presence of the DOX-loaded microgels. This pH-responsive fluorescent active alginate-based biomaterial could be a promising material for the anti-cancer drug delivery and other medical fields.

Introduction of Electron Donor Groups into the Azulene Structure: The Appearance of Intense Absorption and Emission in the Visible Region.

In this work, through the Suzuki-Miyaura cross-coupling reaction with high yields, new π-conjugated azulene compounds containing diphenylaniline groups at positions 2 and 6 of azulene were synthesized. The obtained diphenylaniline-azulenes have intensely visible-light absorbing and emitting (in the wavelength range from 400 to 600 nm) properties. It has been shown that such unique optical properties, in particular fluorescent emission in the region of blue and green photoluminescence (λem at 495 and 525 nm), which were absent in the original azulene, are the result of the electron donor effect of diphenylaniline groups, which significantly changes the electronic structure of azulene and leads to the allowed HOMO → LUMO electron transition.

Synthesis and Photophysical Properties of Small Helical Carbon Nanohoops Combined with Computational Studies on Racemization Pathway.

We herein report the facile synthesis of two helical carbon nanorings with small ring sizes, cyclo[6]paraphenylene-1,5-naphthylene ([6]CPPNap1,5), and cyclo[6]paraphenylene-1,5-anthrylene ([6]CPPAn1,5). The structures were determined by NMR and HR-MS. X-ray single-crystal data of [6]CPPNap1,5 was also achieved. The strain energy and racemization processes were investigated by DFT calculations. The reduced ring sizes result in increased ring strain and elevated energy barriers. The photophysical properties were studied by UV-Vis absorption, fluorescence emission, and time-resolved fluorescence decay.

Deuterated Multiple‐Resonance Thermally Activated Delayed Fluorescence Emitter and Their Application in Vacuum‐Deposited Organic Light‐Emitting Diodes

AbstractMultiple‐resonance thermally activated delayed fluorescence (MR‐TADF) emitters have garnered significant attention in recent years due to their remarkable properties, such as high luminescent quantum yield, robustness, and their compliance with the Broadcast Television 2020 standard for the new generation of ultrahigh‐definition. Despite these advancements, the operational lifetimes of organic light‐emitting diodes (OLEDs) relying on MR‐TADF emitters still fall short for practical application. It is believed that the enhancement of the intrinsic molecular stability of tBu‐DABNA, a fundamental backbone of MR‐TADF emitters, holds great promise to be a universal strategy for all MR‐TADF emitters improving the operational lifetimes of OLEDs. Herein, the design and synthesis of targeted deuteration are reported on donor and/or backbone of MR‐TADF emitters, where the structure‐property relationship between intrinsic molecular stability upon isotopic effect and device operational stability are examined. The isotopic analogs show a gradual increase in the device operational stability and achieve long‐lifetime LT80 (80% of the initial luminance of 1000 cd m−2) of 24.3 h for TADF‐sensitized fluorescence OLED, representing a sevenfold enhancement when compared with the undeuterated counterpart. This strategic deuteration approach underlines the importance of structural modification on materials toward device operational stability.

Nitrogen-Embedding Strategy for Short-Range Charge Transfer Excited States and Efficient Narrowband Deep-Blue Organic Light Emitting Diodes.

The development of deep-blue organic light-emitting diodes (OLEDs) featuring high efficiency and narrowband emission is of great importance for ultrahigh-definition displays with wide color gamut. Herein, based on the nitrogen-embedding strategy for modifying the short range charge transfer excited state energies of multi-resonance (MR) thermally activated delayed fluorescence (TADF) emitters, we introduce one or two nitrogen atoms into the central benzene ring of a versatile boron-embedded 1,3-bis(carbazol-9-yl)benzene skeleton. This approach resulted in the stabilization of the highest occupied molecular orbital energy levels and the formation of intramolecular hydrogen bonds, and thus systematic hypsochromic shifts and narrowing spectra. In toluene solution, two heterocyclic-based MR-TADF molecules, Py-BN and Pm-BN, exhibit deep-blue emissions with high photoluminescence quantum yields of 93 % and 94 %, and narrow full width at half maximum of 14 and 13 nm, respectively. A deep-blue hyperfluorescent OLED based on Py-BN exhibited a maximum external quantum efficiency of 27.7 % and desired color purity with Commission Internationale de L'Eclairage (CIE) coordinates of (0.150, 0.052). These results demonstrate the significant potential for the development of deep blue narrowband MR-TADF emitters.

Nitrogen‐Embedding Strategy for Short‐Range Charge Transfer Excited States and Efficient Narrowband Deep‐Blue Organic Light Emitting Diodes

AbstractThe development of deep‐blue organic light‐emitting diodes (OLEDs) featuring high efficiency and narrowband emission is of great importance for ultrahigh‐definition displays with wide color gamut. Herein, based on the nitrogen‐embedding strategy for modifying the short range charge transfer excited state energies of multi‐resonance (MR) thermally activated delayed fluorescence (TADF) emitters, we introduce one or two nitrogen atoms into the central benzene ring of a versatile boron‐embedded 1,3‐bis(carbazol‐9‐yl)benzene skeleton. This approach resulted in the stabilization of the highest occupied molecular orbital energy levels and the formation of intramolecular hydrogen bonds, and thus systematic hypsochromic shifts and narrowing spectra. In toluene solution, two heterocyclic‐based MR‐TADF molecules, Py‐BN and Pm‐BN, exhibit deep‐blue emissions with high photoluminescence quantum yields of 93 % and 94 %, and narrow full width at half maximum of 14 and 13 nm, respectively. A deep‐blue hyperfluorescent OLED based on Py‐BN exhibited a maximum external quantum efficiency of 27.7 % and desired color purity with Commission Internationale de L'Eclairage (CIE) coordinates of (0.150, 0.052). These results demonstrate the significant potential for the development of deep blue narrowband MR‐TADF emitters.

Comparative Study of Two Spectral Methods for Estimating the Excited State Dipole Moment of Non-Fluorescent Molecules.

The electronic absorption spectral characteristics of cycloimmonium ylids with a zwitterionic structure have been analyzed in forty-three solvents with different hydrogen bonding abilities. The two ylids lack fluorescence emission but are very dynamic in electronic absorption spectra. Using the maximum of the ICT band, the goal was to establish an accurate relationship between the shift of the ICT visible band and the solvent parameters and to estimate two of the descriptors of the first (the) excited state: the dipole moment and the polarizability. Two procedures were involved: the variational method and the relationships of the Abe model. The results indicate that the excited state dipole moment of the two methylids decreases in the absorption process in comparison with the ground state. The introduction of a correction term in the Abe model that neglects the intermolecular H-bonding interactions leads to a more accurate determination of the two descriptors. The strong solvatochromic response of both ylids has been further applied in distinguishing the solvents as a function of their specific parameters. Principal component analysis was applied to five selected properties, including the maximum of the charge transfer band. The results were further applied to discriminate several binary solvent mixtures.