Fluorescence Readout Research Articles

Rapid, Affordable, and Uncomplicated Production of Bacterial Cell-free Lysate.

Cell-free gene expression offers the power of biology without the complications of a living organism. Although many such gene expression systems exist, most are quite expensive to buy and/or require special equipment and finely honed expertise to produce effectively. This protocol describes a method to produce bacterial cell-free lysate that supports high levels of gene expression, using only standard laboratory equipment and requiring minimal processing. The method uses an Escherichia coli strain producing an endolysin that does not affect growth, but which efficiently lyses a harvested cell pellet following a simple freeze-thaw cycle. The only further processing required is a brief incubation followed by centrifugation to clear the autolysate of cellular debris. Dynamic gene circuits can be achieved through heterologous expression of the ClpX protease in the cells before harvesting. An E. coli strain lacking the lacZ gene can be used for high-sensitivity, cell-free biosensing applications using a colorimetric or fluorescent readout. The entire protocol requires as few as 8-9 hours, with only 1-2 hours of hands-on labor from inoculation to completion. By reducing the cost and time to obtain cell-free lysate, this method should increase the affordability of cell-free gene expression for various applications.

Development of a Rapid and Sensitive CasRx-Based Diagnostic Assay for SARS-CoV-2.

The development of an extensive toolkit for potential point-of-care diagnostics that is expeditiously adaptable to new emerging pathogens is of critical public health importance. Recently, a number of novel CRISPR-based diagnostics have been developed to detect SARS-CoV-2. Herein, we outline the development of an alternative CRISPR nucleic acid diagnostic utilizing a Cas13d ribonuclease derived from Ruminococcus flavefaciens XPD3002 (CasRx) to detect SARS-CoV-2, an approach we term SENSR (sensitive enzymatic nucleic acid sequence reporter) that can detect attomolar concentrations of SARS-CoV-2. We demonstrate 100% sensitivity in patient-derived samples by lateral flow and fluorescence readout with a detection limit of 45 copy/μL. This technology expands the available nucleic acid diagnostic toolkit, which can be adapted to combat future pandemics.

CRISPR/Cas-powered nanobiosensors for diagnostics

CRISPR diagnostics (CRISPR-Dx) offer a wide range of enhancements compared to traditional nanobiosensors by taking advantage of the excellent trans-cleavage activity of the CRISPR/Cas systems. However, the single-stranded DNA/RNA reporters of the current CRISPR-Dx suffer from poor stability and limited sensitivity, which make their application in complex biological environments difficult. In comparison, nanomaterials, especially metal nanoparticles, exhibits robust stability and desirable optical and electrocatalytical properties, which make them ideal as reporter molecules. Therefore, biosensing research is moving towards the use of the trans-cleavage activity of CRISPR/Cas effectors on metal nanoparticles and apply the new phenomenon to develop novel nanobiosensors to target various targets such as viral infections, genetic mutations and tumor biomarkers, by using different sensing methods, including, but not limited to fluorescence, luminescence resonance, colorimetric and electrochemical signal readout. In this review, we explore some of the most recent advances in the field of CRISPR-powered nanotechnological biosensors. Demonstrating high accuracy, sensitivity, selectivity and versatility, nanobiosensors along with CRISPR/Cas technology offer tremendous potential for next-generation diagnostics of multiple targets, especially at the point of care and without any target amplification.

Functional Infectious Nanoparticle Detector: Finding Viruses by Detecting Their Host Entry Functions Using Organic Bioelectronic Devices.

Emerging viruses will continue to be a threat to human health and wellbeing into the foreseeable future. The COVID-19 pandemic revealed the necessity for rapid viral sensing and inhibitor screening in mitigating viral spread and impact. Here, we present a platform that uses a label-free electronic readout as well as a dual capability of optical (fluorescence) readout to sense the ability of a virus to bind and fuse with a host cell membrane, thereby sensing viral entry. This approach introduces a hitherto unseen level of specificity by distinguishing fusion-competent viruses from fusion-incompetent viruses. The ability to discern between competent and incompetent viruses means that this device could also be used for applications beyond detection, such as screening antiviral compounds for their ability to block virus entry mechanisms. Using optical means, we first demonstrate the ability to recapitulate the entry processes of influenza virus using a biomembrane containing the viral receptor that has been functionalized on a transparent organic bioelectronic device. Next, we detect virus membrane fusion, using the same, label-free devices. Using both reconstituted and native cell membranes as materials to functionalize organic bioelectronic devices, configured as electrodes and transistors, we measure changes in membrane properties when virus fusion is triggered by a pH drop, inducing hemagglutinin to undergo a conformational change that leads to membrane fusion.

Exploiting the orthogonal CRISPR-Cas12a/Cas13a trans-cleavage for dual-gene virus detection using a handheld device

Although CRISPR-Cas12a and CRISPR-Cas13a systems work individually effective on gene detection, their multiplex detection capability is limited due to the lack of specific probe cleavage mechanism. Herein we present a high-efficient dual-gene diagnostic technique based on the orthogonal DNA/RNA collateral cleavage mechanism of Cas12a/Cas13a system. In this design, dual-gene amplified products from the multiplex recombinase polymerase amplification (RPA) were simultaneously detected by Cas12a and Cas13a assay in a single tube. The resulting orthogonal DNA/RNA collateral cleavage can specifically illuminate two spectral differentiated DNA and RNA probes, respectively. By integrating with the smartphone-based fluorescence readout, a portable detection platform is achieved. As a proof-of-concept, reliable dual-gene detection of SARS-CoV-2 and African Swine fever virus (ASFV) were demonstrated, exhibiting 100% sensitivity and specificity for clinical samples analysis (32 swab specimens for SARS-CoV-2 and 35 ASFV suspected swine blood samples). This developed portable dual-gene detection platform can provide accurate point-of-care screening of infectious diseases in resources-limited settings.

CRISPR-based platform for rapid, sensitive and field-deployable detection of scale drop disease virus in Asian sea bass (Lates calcarifer).

Scale drop disease virus (SDDV) is a major pathogen of Asian sea bass that has emerged in many countries across the Asia Pacific since 1992 and carries the potential to cause drastic economic losses to the aquaculture sector. The lack of an approved vaccine for SDDV necessitates timely prevention as the first line of defence against the disease, but current diagnostic platforms still face challenges that render them incompatible with field applications, particularly in resource-limited settings. Here, we developed a novel detection platform for SDDV based on a CRISPR-Cas12a-based nucleic acid detection technology combined with recombinase polymerase amplification (RPA-Cas12a). Using the viral adenosine triphosphatase (SDDV-ATPase) gene as a target, we achieved the detection limit of 40 copies per reaction and high specificity for SDDV. The coupling with fluorescence and lateral flow readouts enables naked-eye visualization and straightforward data interpretation requiring minimal scientific background. Compared with semi-nested PCR in field sample evaluation, our RPA-Cas12a assay is more sensitive and capable of detecting SDDV in asymptomatic fish. Importantly, the entire workflow can be carried out at a constant temperature of 37°C within an hour from start to finish, thus removing the need for an expensive thermal cycling apparatus and long turnaround times associated with PCR-based methods. Therefore, owing to its high accuracy, rapidity and user-friendliness, the developed RPA-Cas12a platform shows the potential for diagnosis of SDDV at point of need and could be a valuable tool to help protect fish farming communities from large-scale epidemics.

Improving Performance of a SARS-CoV-2 RT-LAMP Assay for Use With a Portable Isothermal Fluorimeter: Towards a Point-of-Care Molecular Testing Strategy.

Frequent and accessible testing is a critical tool to contain the spread of severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2). To develop low-cost rapid tests, many researchers have used reverse transcription loop-mediated isothermal amplification (RT-LAMP) with fluorescent readout. Fluorescent LAMP-based assays can be performed using cost-effective, portable, isothermal instruments that are simpler to use and more rugged than polymerase chain reaction (PCR) instruments. However, false-positive results due to nonspecific priming and amplification have been reported for a number of LAMP-based assays. In this report, we implemented a RT-LAMP assay for SARS-CoV-2 on a portable isothermal fluorimeter and a traditional thermocycler; nonspecific amplification was not observed using the thermocycler but did occur frequently with the isothermal fluorimeter. We explored 4 strategies to optimize the SARS-CoV-2 RT-LAMP assay for use with an isothermal fluorimeter and found that overlaying the reaction with mineral oil and including the enzyme Tte UvrD helicase in the reaction eliminated the problem. We anticipate these results and strategies will be relevant for use with a wide range of portable isothermal instruments.

Methylation-Sensitive Loop-Mediated Isothermal Amplification (LAMP): Nucleic Acid Methylation Detection through LAMP with Mobile Fluorescence Readout.

The emergence of epigenetic gene regulation and its role in disease have motivated a growing field of epigenetic diagnostics for risk assessment and screening. In particular, irregular cytosine DNA base methylation has been implicated in several diseases, yet the methods for detecting these epigenetic marks are limited to lengthy protocols requiring bulky and costly equipment. We demonstrate a simple workflow for detecting methylated CpG dinucleotides in synthetic and genomic DNA samples using methylation-sensitive restriction enzyme digestion followed by loop-mediated isothermal amplification. We additionally demonstrate a cost-effective mobile fluorescence reader comprising a light-emitting diode bundle, a mirror, and optical fibers to transduce fluorescence signals associated with DNA amplification. The workflow can be performed in approximately 1 h, requiring only a simple heat source, and can therefore provide a foundation for distributable point-of-care testing of DNA methylation levels.

Single‐beam dual‐color alternate‐pathway two‐photon spectroscopy: Toward an optical toolbox for redox biology

AbstractWe demonstrate a versatile single‐laser platform for single‐beam dual‐color two‐photon spectroscopy that combines a short‐pulse laser source with a tunable broadband wavelength converter based on a highly nonlinear photonic‐crystal fiber (PCF). We show that the short‐pulse PCF output can be tailored, via dispersion and nonlinearity management, to deliver a broadband optical driver whose spectral structure is ideally suited for a single‐beam two‐photon absorption (2PA) spectroscopy of the next‐generation genetically encodable fluorescent‐protein (FP) sensors of pH and redox‐responsive contrast agents. As a promising spectroscopic resource for redox biology, the short‐pulse PCF output can be finely sculpted to alternately drive an FP system via a one of its two 2PA‐allowed quantum pathways, yielding a high‐contrast fluorescence readout for a highly sensitive detection of redox reactions and signaling, pH sensing, and oxidative‐stress diagnosis.

Iodization-enhanced fluorescence and circularly polarized luminescence for dual-readout probe design

Circularly polarized luminescence (CPL) is a preferential emission from chiral systems. Introducing CPL to traditional small fluorescence probes will greatly enhance selectivity and sensitivity due to avoiding the background fluorescence. Small-molecule probes are practically useful for bioimaging and sensing but always suffer from weak CPL properties. To optimize chiral perturbation, the study of structure-CPL correlation is an urgent necessity. Here, we investigated the influence of 3, 3′-substituent of BINOL on optical properties and found that iodization could significantly enhance the fluorescence quantum yield (ΦF) and dissymmetry factor (|glum|). Based on this finding, we presented a strategy to design dual-readout probes emiting both robust total fluorescence and CPL upon activation. As an application example, we first designed a pair of thiols probes, R/S-P1, with the fluorescence readout showing good linear response to cysteine, and CPL signal displaying significant enhancement with |glum| from undetectable value to 0.7 × 10−3.

A Deoxyribozyme-Initiated Self-Catalytic DNA Machine for Amplified Live-Cell Imaging of MicroRNA.

Functional DNA nanostructures have been widely used in various bioassay fields. Yet, the programmable assembly of functional DNA nanostructures in living cells still represents a challenging goal for guaranteeing the sensitive and specific biosensing utility. In this work, we report a self-catalytic DNA assembly (SDA) machine by using a feedback deoxyribozyme (DNAzyme)-amplified branched DNA assembly. This SDA system consists of catalytic self-assembly (CSA) and DNAzyme amplification modules for recognizing and amplifying the target analyte. The analyte initiates the CSA reaction, leading to the formation of Y-shaped DNA that carries two RNA-cleaving DNAzymes. One DNAzyme can then successively cleave the corresponding substrate and generate numerous additional inputs to activate new CSA reactions, thus realizing a self-catalytic amplification reaction. Simultaneously, the other DNAzyme is assembled as a versatile signal transducer for cleaving the fluorophore/quencher-modified substrate, leading to the generation of an amplified fluorescence readout. By incorporating a flexible auxiliary sensing module, the SDA system can be converted into a universal sensing platform for detecting cancerous biomarkers, e.g., a well-known oncogene microRNA-21 (miR-21). Moreover, the SDA system realized the precise intracellular miR-21 imaging in living cells, which is attributed to the reciprocal amplification property between CSA reactions and DNAzyme biocatalysis. This compact SDA amplifier machine provides a universal and facile toolbox for the highly efficient identification of cancerous biomarkers and thus holds great potential for early cancer diagnosis.

A chemical-enhanced system for CRISPR-Based nucleic acid detection

The CRISPR-based nucleic acid detection systems have shown great potential for point-of-care testing of viral pathogens, especially in the context of COVID-19 pandemic. Here we optimize several key parameters of reaction chemistry and develop a Chemical Enhanced CRISPR Detection system for nucleic acid (termed CECRID). For the Cas12a/Cas13a-based signal detection phase, we determine buffer conditions and substrate range for optimal detection performance, and reveal a crucial role of bovine serum albumin in enhancing trans-cleavage activity of Cas12a/Cas13a effectors. By comparing several chemical additives, we find that addition of L-proline can secure or enhance Cas12a/Cas13a detection capability. For isothermal amplification phase with typical LAMP and RPA methods, inclusion of L-proline can also enhance specific target amplification as determined by CRISPR detection. Using SARS-CoV-2 pseudovirus, we demonstrate CECRID has enhanced detection sensitivity over chemical additive-null method with either fluorescence or lateral flow strip readout. Thus, CECRID provides an improved detection power and system robustness, and helps to develop enhanced reagent formula or test kit towards practical application of CRISPR-based diagnostics.

Screening Internal Donor-Acceptor Biaryl Nucleobase Surrogates for Turn-On Fluorescence Affords an Aniline-Carboxythiophene Probe for Protein Detection by G-Quadruplex DNA.

Donor-acceptor biaryls serve as microenvironment fluorescent sensors with highly quenched intramolecular charge transfer (ICT) emission in polar protic solvents that turns on in aprotic media. In DNA, canonical donor-acceptor fluorescent base analogs can be prepared through on-strand Suzuki-Miyaura cross-coupling reactions involving 8-bromo-2'-deoxyguanosine (8-Br-dG) with an acceptor aryboronic acid. Herein, we demonstrate that replacement of 8-Br-dG with N-methyl-4-bromoaniline (4-Br-An) containing an acyclic N-glycol group can be employed in the on-strand Suzuki-Miyaura reaction to afford new donor-acceptor biaryl nucleobase surrogates with a 40-fold increase in emission intensity for fluorescent readout within single-strand oligonucleotides. Screening the best acceptor for turn-on fluorescence upon duplex formation afforded the carboxythiophene derivative [COOTh]An with a 7.4-fold emission intensity increase upon formation of a single-bulged duplex (-1) with the surrogate occupying a pyrimidine-flanked bulge. Insertion of the [COOTh]An surrogate into the lateral TT loops produced by the antiparallel G-quadruplex (GQ) of the thrombin binding aptamer (TBA) afforded a 4.1-fold increase in probe fluorescence that was accompanied by a 20 nm wavelength shift to the blue upon thrombin binding. The modified TBA afforded a limit of detection of 129 nM for thrombin and displayed virtually no emission response to off-target proteins. The fluorescence response of [COOTh]An to thrombin binding highlights the utility of the thienyl-aniline moiety for monitoring DNA-protein interactions.

A one-step, one-pot CRISPR nucleic acid detection platform (CRISPR-top): Application for the diagnosis of COVID-19

The existing CRISPR-mediated diagnostic tests require a two-step procedure (DNA or RNA amplification followed by CRISPR-mediated sequence-specific detection) for nucleic acid detection, which increases complexity and the risk of sample cross-contamination. Here, we report a new CRISPR-mediated test, called CRISPR-top (CRISPR-mediated testing in one-pot), which integrates simultaneous target pre-amplification with CRISPR/cas12b-mediated detection into a one-pot reaction mixture, performed at a constant temperature. The novel CRISPR-top assay was applied to detect severe acute respiratory syndrome coronavirus 2 (SARS-CoV-2), the causative agent for COVID-19 (coronavirus disease 2019). COVID-19 CRISPR-top targets the ORF1ab (opening reading frame 1a/b) and NP (nucleoprotein) genes of SARS-CoV-2, and operates at 59 °C for 40 min with minimal instrument. The COVID-19 CRISPR-top assay can return results within 60-min and is easily interpreted by visual fluorescence or lateral flow readouts. The analytical limit of detection (LoD) for COVID-19 CRISPR-top is 10 copies (for each detection target) per reaction with no cross-reactivity observed from non-SARS-CoV-2 templates. Among clinically collected non-COVID-19 samples, the assay's specificity was 100% (80/80 oropharynx swab samples). Among 52 COVID-19 positive clinical samples collected, the COVID-19 CRISPR-top assay yielded 38 (73.1%) positive results using fluorescence readout and 35 (67.3%) positive results with lateral-flow readout. These diagnostic results were similar to those obtained using RT-PCR (34 positive (65.4%)). These data indicate that COVID-19 CRISPR-top is a simple, rapid, accurate and highly sensitive method for SARS-CoV-2 detection which can be used in the clinic, field laboratories and primary care facilities in resource-challenged settings.

REVEALR: A Multicomponent XNAzyme-Based Nucleic Acid Detection System for SARS-CoV-2.

Isothermal amplification strategies capable of rapid, inexpensive, and accurate nucleic acid detection provide new options for large-scale pathogen detection, disease diagnosis, and genotyping. Here we report a highly sensitive multicomponent XNA-based nucleic acid detection platform that combines analyte preamplification with X10-23-mediated catalysis to detect the viral pathogen responsible for COVID-19. The platform, termed RNA-Encoded Viral Nucleic Acid Analyte Reporter (REVEALR), functions with a detection limit of ≤20 aM (∼10 copies/μL) using conventional fluorescence and paper-based lateral flow readout modalities. With a total assay time of 1 h, REVEALR provides a convenient nucleic acid alternative to equivalent CRISPR-based approaches, which have become popular methods for SARS-CoV-2 detection. The assay shows no cross-reactivity for other in vitro transcribed respiratory viral RNAs and functions with perfect accuracy against COVID-19 patient-derived clinical samples.

Multiplexed Ion Beam Imaging Readout of Single-Cell Immunoblotting.

Improvements in single-cell protein analysis are required to study the cell-to-cell variation inherent to diseases, including cancer. Single-cell immunoblotting (scIB) offers proteoform detection specificity, but often relies on fluorescence-based readout and is therefore limited in multiplexing capability. Among rising multiplexed imaging methods is multiplexed ion beam imaging by time-of-flight (MIBI-TOF), a mass spectrometry imaging technology. MIBI-TOF employs metal-tagged antibodies that do not suffer from spectral overlap to the same degree as fluorophore-tagged antibodies. We report for the first-time MIBI-TOF of single-cell immunoblotting (scIB-MIBI-TOF). The scIB assay subjects single-cell lysate to protein immunoblotting on a microscale device consisting of a 50- to 75-μm thick hydrated polyacrylamide (PA) gel matrix for protein immobilization prior to in-gel immunoprobing. We confirm antibody-protein binding in the PA gel with indirect fluorescence readout of metal-tagged antibodies. Since MIBI-TOF is a layer-by-layer imaging technique, and our protein target is immobilized within a 3D PA gel layer, we characterize the protein distribution throughout the PA gel depth by fluorescence confocal microscopy and confirm that the highest signal-to-noise ratio is achieved by imaging the entirety of the PA gel depth. Accordingly, we report the required MIBI-TOF ion dose strength needed to image varying PA gel depths. Lastly, by imaging ∼42% of PA gel depth with MIBI-TOF, we detect two isoelectrically separated TurboGFP (tGFP) proteoforms from individual glioblastoma cells, demonstrating that highly multiplexed mass spectrometry-based readout is compatible with scIB.

Development of a Fluorescent Assay to Search New Drugs Using Stable tdTomato-Leishmania, and the Selection of Galangin as a Candidate With Anti-Leishmanial Activity.

Antimonials continue to be considered the first-line treatment for leishmaniases, but its use entails a wide range of side effects and serious reactions. The search of new drugs requires the development of methods more sensitive and faster than the conventional ones. We developed and validated a fluorescence assay based in the expression of tdTomato protein by Leishmania, and we applied this method to evaluate the activity in vitro of flavonoids and reference drugs. The pIR1SAT/tdTomato was constructed and integrated into the genome of Leishmania (Leishmania) amazonensis. Parasites were selected with nourseothricin (NTC). The relation of L. amaz/tc3 fluorescence and the number of parasites was determined; then the growth in vitro and infectivity in BALB/c mice was characterized. To validate the fluorescence assay, the efficacy of miltefosine and meglumine antimoniate was compared with the conventional methods. After that, the method was used to assess in vitro the activity of flavonoids; and the mechanism of action of the most active compound was evaluated by transmission electron microscopy and ELISA. A linear correlation was observed between the emission of fluorescence of L. amaz/tc3 and the number of parasites (r2 = 0.98), and the fluorescence was stable in the absence of NTC. No differences were observed in terms of infectivity between L. amaz/tc3 and wild strain. The efficacy of miltefosine and meglumine antimoniate determined by the fluorescence assay and the microscopic test showed no differences, however, in vivo the fluorescence assay was more sensitive than limiting dilution assay. Screening assay revealed that the flavonoid galangin (GAL) was the most active compound with IC50 values of 53.09 µM and 20.59 µM in promastigotes and intracellular amastigotes, respectively. Furthermore, GAL induced mitochondrial swelling, lipid inclusion bodies and vacuolization in promastigotes; and up-modulated the production of IL-12 p70 in infected macrophages. The fluorescence assay is a useful tool to assess the anti-leishmanial activity of new compounds. However, the assay has some limitations in the macrophage-amastigote model that might be related with an interfere of flavanol aglycones with the fluorescence readout of tdTomato. Finally, GAL is a promising candidate for the development of new treatment against the leishmaniasis.

Responsive Hydrogel Binding Matrix for Dual Signal Amplification in Fluorescence Affinity Biosensors and Peptide Microarrays.

A combined approach to signal enhancement in fluorescence affinity biosensors and assays is reported. It is based on the compaction of specifically captured target molecules at the sensor surface followed by optical probing with a tightly confined surface plasmon (SP) field. This concept is utilized by using a thermoresponsive hydrogel (HG) binding matrix that is prepared from a terpolymer derived from poly(N-isopropylacrylamide) (pNIPAAm) and attached to a metallic sensor surface. Epi-illumination fluorescence and SP-enhanced total internal reflection fluorescence readouts of affinity binding events are performed to spatially interrogate the fluorescent signal in the direction parallel and perpendicular to the sensor surface. The pNIPAAm-based HG binding matrix is arranged in arrays of sensing spots and employed for the specific detection of human IgG antibodies against the Epstein-Barr virus (EBV). The detection is performed in diluted human plasma or with isolated human IgG by using a set of peptide ligands mapping the epitope of the EBV nuclear antigen. Alkyne-terminated peptides were covalently coupled to the pNIPAAm-based HG carrying azide moieties. Importantly, using such low-molecular-weight ligands allowed preserving the thermoresponsive properties of the pNIPAAm-based architecture, which was not possible for amine coupling of regular antibodies that have a higher molecular weight.

Programming Fluorogenic DNA Probes for Rapid Detection of Steroids

AbstractThe ability of aptamers to recognize a variety of different molecules has fueled their emergence as recognition agents to probe complex media and cells. Many detection strategies require aptamer binding to its target to result in a dramatic change in structure, typically from an unfolded to a folded state. Here, we report a strategy based on forced intercalation (FIT) that increases the scope of aptamer recognition by transducing subtle changes in aptamer structures into fluorescent readouts. By screening a library of green‐fluorescent FIT‐aptamers whose design is guided by computational modeling, we could identify hits that sense steroids like dehydroepiandrosterone sulfate (DHEAS) down to 1.3 μM with no loss in binding affinity compared to the unmodified aptamer. This enabled us to study DHEAS in clinical serum samples with several advantages over gold standard methods, including rapid readout (<30 min), simple instrumentation (plate‐reader), and low sample volumes (10 μL).

Programming Fluorogenic DNA Probes for Rapid Detection of Steroids.

The ability of aptamers to recognize a variety of different molecules has fueled their emergence as recognition agents to probe complex media and cells. Many detection strategies require aptamer binding to its target to result in a dramatic change in structure, typically from an unfolded to a folded state. Here, we report a strategy based on forced intercalation (FIT) that increases the scope of aptamer recognition by transducing subtle changes in aptamer structures into fluorescent readouts. By screening a library of green-fluorescent FIT-aptamers whose design is guided by computational modeling, we could identify hits that sense steroids like dehydroepiandrosterone sulfate (DHEAS) down to 1.3 μM with no loss in binding affinity compared to the unmodified aptamer. This enabled us to study DHEAS in clinical serum samples with several advantages over gold standard methods, including rapid readout (<30 min), simple instrumentation (plate-reader), and low sample volumes (10 μL).