Fluorescent Molecules Research Articles

Dihydroxanthene-based monoamine oxidase A-activated photosensitizers for photodynamic/photothermal therapy of tumors

Small molecule photosensitizers for combined in vivo tailored cancer diagnostics and photodynamic/photothermal therapy are desperately needed. Monoamine oxidase A (MAO-A)-activated therapeutic and diagnostic compounds provide great selectivity because MAO-A can be employed as a biomarker for associated Tumors. In order to screen photosensitizers with photodynamic therapeutic potential, we have created a range of near-infrared fluorescent molecules in this work by combining dihydroxanthene parent with various heterocyclic fluorescent dyes. The NIR fluorescent diagnostic probe, DHMQ, was created by combining the screened fluorescent dye matrices with the propylamino group, which is the recognition moiety of MAO-A, based on the oxidative deamination mechanism of the enzyme. This probe has a low toxicity level and can identify MAO-A precisely. It has the ability to use fluorescence imaging on mice and cells to track MAO-A activity in real-time. It has strong phototoxicity and can produce singlet oxygen when exposed to laser light. The temperature used in photothermal imaging can get up to 50 °C, which can harm tumor cells permanently and have a positive phototherapeutic impact on tumors grown from SH-SY5Y xenograft mice. The concept of using MAO-A effectively in diseases is expanded by the MAO-A-activated diagnostic-integrated photosensitizers, which offer a new platform for in vivo cancer diagnostics and targeted anticancer treatment.

Enhancement of Upconversion Luminescence through Three-Dimensional Design of Plasma Ti3O5-Coupled Structural Domain-Limiting Effects.

Upconversion luminescence plays a crucial role in various technological applications, and among the various valence states of lanthanide elements, Ln3+ has the highest stability. The 4f orbitals of these elements are in a fully empty, semifull, or full state. This special 4f electron configuration allows them to exhibit rich discrete energy levels. However, the 4f-4f transition of Ln3+ rare earth ions itself is prohibited, resulting in a lower luminescence efficiency. This limitation greatly hinders the practical application of upconversion luminescence. In this study, we report nanostructured luminescence-enhanced substrate platforms with both semiconductive local surface plasmons and spatially confined domain effects on a single defect semiconductor substrate. By coupling NaYF4:Yb-Er nanoparticle emitters to the surface of Ti3O5 NC-arrays plasmonic nanostructures, an ultrabright luminescence with a 32-fold increase in green emission and a 40-fold increase in red emission was achieved. Furthermore, the fluorescence resonance energy transfer characteristics observed in the R6G/NaYF4/Ti3O5 NC-array composite film enable accurate detection of fluorescent molecules. The results provide an innovative and intelligent approach to enhance the upconversion luminescence intensity of rare-doped nanoparticles and develop highly sensitive molecular detection systems based on the above luminescence enhancement.

Gelsolin regulates receptor-mediated and fluid-phase endocytosis in platelets

BackgroundEndocytosis is the process by which platelets incorporate extracellular molecules into their secretory granules. Endocytosis is mediated by the actin cytoskeleton in nucleated cells; however, the endocytic mechanisms in platelets are undefined. ObjectivesTo better understand platelet endocytosis, we studied gelsolin (Gsn), an actin-severing protein that promotes actin assembly. MethodsMouse platelets from Gsn-null (Gsn−/−) and wild-type (WT) controls were used. The uptake of fluorescent cargo molecules was compared as a measure of their endocytic efficiency. Receptor-mediated endocytosis was measured by the uptake of fibrinogen and transferrin; fluid-phase endocytosis was monitored by the uptake of fluorescent dextrans. ResultsAdenosine diphosphate (ADP)–stimulated WT platelets readily internalized both receptor-mediated and fluid-phase cargoes. In contrast, Gsn−/− platelets showed a severe defect in the endocytosis of both types of cargo. The treatment of WT platelets with the actin-disrupting drugs cytochalasin D and jasplakinolide also reduced endocytosis. Notably, the individual and combined effects of Gsn deletion and drug treatment were similar for both receptor-mediated and fluid-phase endocytosis, indicating that Gsn mediates endocytosis via its action on the actin cytoskeleton. ConclusionOur study demonstrates that Gsn plays a key role in the uptake of bioactive mediators by platelets.

Design and Preparation of Multicolor Long‐Lifetime Fluorescent Material Based on Charge‐Separated States

AbstractAfterglow materials have the advantages of long luminescent lifetime and large stokes shift, which show good application prospects in fields such as probes, anti‐counterfeiting, and organic light‐emitting diode (OLED). Nevertheless, the preparation of multicolor long afterglow materials with simple components remains a challenge. This article proposes a general strategy for preparing room temperature long‐lifetime fluorescent polymer materials. This strategy involves doping various fluorescent small molecules containing electron‐donating groups into polymers containing electron‐withdrawing groups. The results show the two components can form charge‐separated state by long‐range charge transfer, and the excitons recombined in fluorescent molecules and emitted long‐lived fluorescence. After photoactivation, the P3COMe film doped with 1% RhB can emit red fluorescent afterglow. The lifetime can achieve 39.4 ms, and the afterglow can last 4.17 s. Meanwhile, by introducing fluorescent molecules with different luminescent colors, the multicolor long‐lifetime fluorescence is also realized. In addition, the influence of the structure of luminescent small molecules on the afterglow fluorescent properties of their doped films is also elucidated.

Light-Driven Mitochondrion-to-Nucleus DNA Cascade Fluorescence Imaging and Enhanced Cancer Cell Photoablation.

Nucleic acids are mainly found in the mitochondria and nuclei of cells. Detecting nucleic acids in the mitochondrion and nucleus in cascade mode is crucial for understanding diverse biological processes. This study introduces a novel nucleic acid-based fluorescent styrene dye (SPP) that exhibits light-driven cascade migration from the mitochondrion to the nucleus. By introducing N-arylpyridine on one side of the styrene dye skeleton and a bis(2-ethylsulfanyl-ethy)-amino unit on the other side, we found that SPP exhibits excellent DNA specificity (16-fold, FDNA/Ffree) and a stronger binding force to nuclear DNA (-5.09 kcal/mol) than to mitochondrial DNA (-2.59 kcal/mol). SPP initially accumulates in the mitochondrion and then migrates to the nucleus within 10 s under light irradiation. By tracking the damage to nucleic acids in apoptotic cells, SPP allows the successful visualization of the differences between apoptosis and ferroptosis. Finally, a triphenylamine segment with photodynamic effects was incorporated into SPP to form a photosensitizer (MTPA-SPP), which targets the mitochondria for photosensitization and then migrates to the nucleus under light irradiation for enhanced photodynamic cancer cell treatment. This innovative nucleic acid-based fluorescent molecule with light-triggered mitochondrion-to-nucleus migration ability provides a feasible approach for the in situ identification of nucleic acids, monitoring of subcellular physiological events, and efficient photodynamic therapy.

Photorewriting, Time-Resolved Encryption, and Unclonable Anticounterfeiting with Artificial Intelligence Authentication via a Reversible Photoswitchable System.

In the fields of photolithographic patterning, optical anticounterfeiting, and information encryption, reversible photochromic materials with solid-state fluorescence are emerging as a potential class of systems. A design strategy for reversible photochromic materials has been proposed and synthesized through the introduction of photoactive thiophene groups into the molecular backbone of aryl vinyls, compounds with unique aggregation-induced emission properties, and solid-state reversible photocontrollable fluorescence and color-changing properties. This work develops novel photochromic inks, films, and cellulose hydrogels for enhancing the security of information encryption and anticounterfeiting technologies. They achieve rapid and reversible color change under ultraviolet light irradiation. Dependent upon the rate of color change, higher levels of time-resolved security can be achieved. This feature is important for enhancing the confidentiality of encrypted information and the reliability of security labels. Color-changing cellulose hydrogels, inks, and films consisting of three photochromic fluorescent molecules have quick photoactivity, great photoreversibility and photostability, and good processability, making them ideal for time-delayed anticounterfeiting and smart encryption. Furthermore, specialized algorithms are used to construct convolutional neural networks, and image analysis is performed on these systems, thus solving the current problem of the time-consuming information decryption process. This artificial intelligence method offers new opportunities for enhanced data encryption.

Pyrrole-substituted difluoroboron β-diketonate dyes: Facile synthesis and multi-state optical properties

Difluoroboron β-diketonate complexes (BF2bdks) are classic fluorescent molecules that have been applied in luminescent materials, oxygen and mechanical sensors, and most investigations concentrate on BF2bdks with varying aromatic groups without heteroatoms. In this work, a new molecular platform BF2bdks with heterocycle-substituted is prepared in one pot, and six unsymmetric π-expanded BF2bdks are synthesized via condensation reaction. B-1∼6 exhibit comparable fluorescence properties in solution, aggregated and solid states. B-3 (683 nm, Φf = 13.1 %) and B-5 (700 nm, Φf = 2.1 %) show near infra-red (NIR) emission with moderate fluorescence intensity in solution state. Solid emission of B, B-1-3 and B-5 are detected with fluorescence quantum yield from 12.8 % to 25.6 %, and B-2, B-3 and B-5 show AIE phenomenon in aggregated state. The results are supported by crystal analysis and DFT calculation in some extent. In a word, this work enriches the heterocycle-substituted BF2bdks system. B-3 and B-5 with moderate intensity NIR emission in solution, aggregated and solid states at the same time, providing a simple preparation method for multi-states luminescent dyes.

AIE-labeled fluorescent polystyrene nanoplastics for quantitative analysis in macrophages uptake

Nanoplastics have attracted significant attention due to their harmful effects on the environment and organisms. However, accurately detecting and quantifying nanoplastics that are ingested by organisms poses a challenge. Conventional organic fluorescent-labeled nanoplastics have reduced labeling efficiency due to aggregation-caused quenching (ACQ), leading to artifacts caused by leakage of fluorescent molecules. To address these limitations, this study utilized AIE fluorescence for internally labeling polystyrene nanoparticles. AIE-active molecules do not emit fluorescence in dilute solutions, thus preventing accuracy issues associated with fluorescence leakage. Three model plastics (TPE@PS) of varying particle sizes were synthesized via the swelling method. The preparation parameters were optimized, followed by stability tests conducted on TPE@PS. Fluorescence microscopy imaging revealed significant uptake of TPE@PS by RAW246.7 cells. A successful standard curve of fluorescence intensity-concentration was established successfully and utilized to accurately quantify the amount of TPE@PS that was ingested by RAW246.7 cells. The results indicate a consistent increase with increasing concentration in TPE@PS uptake across all particle sizes during the fixed exposure duration of 48 h. Furthermore, RAW264.7 cells exhibited a higher propensity to uptake smaller TPE@PS particles. Flow cytometry was also employed to validated the suitability of TPE@PS as a model nanoplastic for tracing purposes.

MINFLUX nanoscopy: Visualising biological matter at the nanoscale level

Since its introduction in 2017, MINFLUX nanoscopy has shown that it can visualise fluorescent molecules with an exceptional localisation precision of a few nanometres. In this overview, we provide a brief insight into technical implementations, fluorescent marker developments and biological studies that have been conducted in connection with MINFLUX imaging and tracking. We also formulate ideas on how MINFLUX nanoscopy and derived technologies could influence bioimaging in the future. This insight is intended as a general starting point for an audience looking for a brief overview of MINFLUX nanoscopy from theory to application.

In situ quantitative mapping of coding single nucleotide polymorphism on mRNA inside cells by SERS-fluorescence dual-mode probe

Surface Enhanced Raman Scattering (SERS) has potential in nucleic acid detection, but its ability on single nucleotide polymorphisms (SNPs) detection in the early diagnosis of diseases is still limited. In fact, there is few research about in situ detection of coding SNPs which are carried on mRNA. In this paper, we developed SERS-Fluorescence Dual-mode probes to achieve in situ quantitative mapping of intracellular cSNP. The probes were based on Au@Ag core-shell structure that possessed both excellent biocompatibility and localized surface plasmon resonance. Fluorescence can provide a rapid visualization of intracellular cSNP, while SERS can achieve its in situ quantification. The quantitation was conducted by comparing the SERS signals of the reporting molecule p-mercaptobenzoic acid and fluorescent molecule FAM, the detecting limitation of which can be achieved as low as 1.4 fM. This ratiometric detection is more accurate than traditional analysis based on signal intensity directly. It successfully achieved intracellular imaging of the G12D mutation site of KRAS gene in A549 cells, which can help to get the distribution of cSNP in single cell more clearly. And it also demonstrated the good mapping ability for biomolecules (1003 cm−1 for phenylalanine) simultaneously. In conclusion, this kind of probe could be used as a potential tool to monitor cSNP as well as biomolecules in multiple biological processes, which could provide reference for disease prediction.

Red Fluorescent Molecule with Aggregation-Induced Emission Based on Dehydroabietic Acid Diarylamine for Bioimaging.

In this paper, molecules with AIE red light properties were designed by coupling dehydroabietic acid diarylamine and 2,3-diphenylfumaronitrile, which were designated 2DTPA-CN and 2TPA-CN. The emission wavelengths were 683nm and 701nm, respectively. The 2DTPA-CN and 2TPA-CN showed typical AIE characteristics with large Stokes shifts of 7.4 × 104 cm-1 and 6.7 × 104 cm-1, respectively. The obvious solvatochromism and electron cloud distributions of HOMO/LUMO in the ground and excited states both reveal the intramolecular charge transfer (ICT) effect. The 2DTPA-CN, boasting exceptional biocompatibility, was successfully prepared into nanoparticles (NPs), which were applied to tumor cell imaging, showing good bioimaging effects both in vitro imaging in live cells and in vivo imaging in live mice. The results demonstrated that it possesses significant potential as an effective bioimaging reagent for the detection of tumor cells. Furthermore, the incorporation of 2,3-diphenylfumaronitrile moieties to dehydroabietic acid diarylamine emerged as a proficient approach to broaden the emission wavelengths of rosin-based fluorescent materials.

A novel core–shell lanthanide coordination polymer ratiometric fluorescent probe for the ultrasensitive and visual detection of anthrax biomarker

A novel core–shell based lanthanide ratiometric fluorescent probe is designed for the rapid and sensitive detection of 2, 6-pyridine dicarboxylic acid (DPA), which is the biomarker of Bacillus anthracis. The fluorescent dye molecule 8-hydroxypyrene-1,3,6-trisulfonic acid trisodium salt (HPTS) was encapsulated in silica nanoparticles as a reference signal and externally connected with guanine mononucleotide europium coordination polymers (Eu/GMP) as a response signal so as to construct a double-emission fluorescent sensor. The visual detection was enabled by the fluorescence color change from green to red under an UV lamp with the addition of DPA. In addition, the RGB auxiliary detection platform was built using color scanning software of smartphone. This work presents a novel and efficient method for detecting anthrax biomarkers.

Coumarin Derivative and Gold Nanoparticle Conjugate as a Selective Fluorescent Sensor for Mercury Ion in Real Sample.

A biphenyl based coumarin fluorescent molecule, N,N'-bis(7-diethylamino-2-oxo-2H-chromen-3-yl)methylene)biphenyl-2-2'-dicarbohydrazide (molecule 1) has been synthesized and characterised. Photophysical studies of 1 exhibit solvent polarity dependent absorption and emission maxima. Citrate capped gold nanoparticles (AuNPs) have been mixed with molecule 1 for the preparation of AuNPs/1 conjugate. The association constant of the AuNPs/1 conjugate has been calculated to 4.54 × 104 M- 1. The AuNPs/1 conjugate has been found to detect Hg2+ ion selectively by fluorescence enhancement. While addition of molecule 1 into the solution of AuNPs, fluorescence intensity of 1 quenched. On addition of several monovalent, divalent and trivalent metal ion into the solution of AuNPs/1 conjugate separately, there was no change in fluorescence intensity of 1 has been observed. However, upon addition of Hg2+ ion into the solution of AuNPs/1 conjugate, the fluorescence intensity enhancement occurred, indicating released of 1 from the surface of AuNPs and probably aggregation of AuNPs took place in presence of Hg2+ ion. The AuNPs/1 conjugate has been found to have a detection limit of 2.3 × 10- 9 M for Hg2+ ion in aqueous solvent. Meanwhile, the AuNPs/1 conjugate have also been successfully applied for the determination of Hg2+ in real water samples.

Effective donor and acceptor modifications of carbazole-benzonitrile thermally activated delayed fluorescence molecules enabling high-performance OLEDs

Carbazole-benzonitrile derivatives (CzBNs) have great potential to enable thermally activated delayed fluorescence (TADF) molecules with both high efficiency and good stability simultaneously. However, the device performances of most CzBN-based organic light-emitting diodes (OLEDs) still lag behind other types of TADF molecules. In this work, we proposed a design strategy to construct efficient CzBN-TADF molecules through acceptor and donor modifications. The cyano-modified acceptor enables the extension of the lowest unoccupied molecular orbital while mostly preserving the overlapped area with the highest occupied molecular orbital. The optimized distributions of frontier molecular orbitals contribute to tiny singlet-triplet energy gaps while maintaining a high radiative decay rate. The incorporation of tert-butyl units in the donor groups further enhances the TADF property of resulted tPCNBN molecule due to suppressed non-radiative decay and reduced exciton self-quenching. Accordingly, OLEDs based on tPCNBN present the best device performances, such as a maximum external quantum efficiency of 33.1 % at 400 cd m−2, which is still as high as 26.3 % at a high luminance of 4000 cd m−2, demonstrating relatively low efficiency roll-off. These results confirm the effectiveness of the proposed design strategy in developing efficient and stable CzBN-TADF materials and devices.

Stretchable Photonic Crystal-Assisted Glycoprotein Identification for Ovarian Cancer Diagnosis.

Photonic crystals with specific wavelengths can realize surface-enhanced excitation and emission intensities of fluorophores and enhance the fluorescence signals of fluorescent molecules. Herein, stretchable photonic crystals with good mechanochromic properties provide continuously adjustable forbidden wavelengths by stretching to change the lattice spacing, with reflectance peaks blue-shifted up to 110 nm to match indicators of different wavelengths and produce differentiated optical enhancement effects. Glycoproteins are significantly identified as clinical markers. However, the wide participation of glycoproteins in various life processes poses enormous complexity and critical challenges for rapid, facile, high-throughput, and accurate clinical analysis or health assessment. In this work, we proposed a stretchable photonic crystal-assisted glycoprotein identification approach for early ovarian cancer diagnosis. Stretchable photonic crystals can provide rich optical information to efficiently identify glycoproteins in complex matrices. A double-indicator fluorescence sensor was designed to respond to the protein trunk and oligosaccharide segment of glycoproteins separately for improved recognition accuracy. Seven typical glycoproteins could be discriminated from proteins, saccharides, or mixture interferents. Clinical ovarian cancer samples for early, intermediate, and advanced ovarian cancer and healthy subjects were verified with 100% accuracy. This strategy of stretchable photonic crystal-assisted glycoprotein identification provides an effective method for accurate, rapid ovarian cancer diagnosis and timely clinical treatment.

Molecular engineering of fluorescent dyes for long-term specific visualization of the plasma membrane based on alkyl-chain-regulated cell permeability

Long-term visualization of changes in plasma membrane dynamics during important physiological processes can provide intuitive and reliable information in a 4D mode. However, molecular tools that can visualize plasma membranes over extended periods are lacking due to the absence of effective design rules that can specifically track plasma membrane fluorescent dye molecules over time. Using plant plasma membranes as a model, we systematically investigated the effects of different alkyl chain lengths of FMR dye molecules on their performance in imaging plasma membranes. Our findings indicate that alkyl chain length can effectively regulate the permeability of dye molecules across plasma membranes. The study confirms that introducing medium-length alkyl chains improves the ability of dye molecules to target and anchor to plasma membranes, allowing for long-term imaging of plasma membranes. This provides useful design rules for creating dye molecules that enable long-term visualization of plasma membranes. Using the amphiphilic amino-styryl-pyridine fluorescent skeleton, we discovered that the inclusion of short alkyl chains facilitated rapid crossing of the plasma membrane by the dye molecules, resulting in staining of the cell nucleus and indicating improved cell permeability. Conversely, the inclusion of long alkyl chains hindered the crossing of the cell wall by the dye molecules, preventing staining of the cell membrane and demonstrating membrane impermeability to plant cells. The FMR dyes with medium-length alkyl chains rapidly crossed the cell wall, uniformly stained the cell membrane, and anchored to it for a long period without being transmembrane. This allowed for visualization and tracking of the morphological dynamics of the cell plasma membrane during water loss in a 4D mode. This suggests that the introduction of medium-length alkyl chains into amphiphilic fluorescent dyes can transform them from membrane-permeable fluorescent dyes to membrane-staining fluorescent dyes suitable for long-term imaging of the plasma membrane. In addition, we have successfully converted a membrane-impermeable fluorescent dye molecule into a membrane-staining fluorescent dye by introducing medium-length alkyl chains into the molecule. This molecular engineering of dye molecules with alkyl chains to regulate cell permeability provides a simple and effective design rule for long-term visualization of the plasma membrane, and a convenient and feasible means of chemical modification for efficient transmembrane transport of small molecule drugs.

Chaotic-flow-driven mixing in T- and V-shaped micromixers

T- and V-shaped (or arrow-shaped) micromixers enable the control of rapid chemical reactions by permitting accelerated mixing. Their mixing performance has been extensively investigated at moderate flow rates, which correspond to Reynolds numbers of the order of several hundreds. However, this operating range does not align with the recent applications of microreactors in organic synthesis. Therefore, this study examined mixing times in T- and V-shaped micromixers with 250-µm-wide channels at high flow rates (Reynolds numbers of up to 1500). The progress of mixing between an acidic solution and a basic solution containing a pH-sensitive fluorescent molecule was visualized by fluorescence microscopy imaging. An image analysis of 200 frames for each condition helped evaluate the degree of mixing and its stability over time under chaotic flow. The performance and stability of the V-shaped micromixer were significantly enhanced when the flow-rate ratio was changed from 1:1 to 1:2. The difference in momentum between the two inlet streams suppressed the undesirable alternation of the flow patterns at the junction. The effects of the choice of fluids (in the lower- and higher-flow-rate sides) on the reaction selectivity were explored through a numerical analysis. It was clarified that the substrate-side flow rate has to be set lower than that of the reactant side in the competing consecutive reaction system. Moreover, a short mixing time of 1 ms was achieved using the V-shaped micromixer at a flow-rate ratio of 1:2 and Re of 1500. These findings provide practical guidelines for the design and operation of microreactor systems.

Role of Bridging Groups in Regulating the Luminescence and Charge Transfer Properties of Thermally Activated Delayed Fluorescence Molecules: A Theoretical Perspective.

Organic emitters with a simultaneous combination of aggregation-induced emission (AIE) and thermally activated delayed fluorescence (TADF) characteristics are in great demand due to their excellent comprehensive performances toward efficient organic light-emitting diodes (OLEDs), biomedical imaging, and the telecommunications field. However, the development of efficient AIE-TADF materials remains a substantial challenge. In this work, light-emitting properties of two AIE-TADF molecules with different bridging groups ICz-BP and ICz-DPS are theoretically investigated in the solid state with the combined quantum mechanics/molecular mechanics (QM/MM) method and the thermal vibration correlation function (TVCF) theory. The research indicates that the C═O bridging bond in ICz-BP is more favorable than the S═O bridging bond in ICz-DPS for enhancing the planarity of the acceptor, increasing conjugation, and thereby elevating the transition dipole moment density. Simultaneously, the stacking pattern of ICz-BP in the solid facilitates a reduction in energy gap between S1 and T1 (ΔEST), achieving rapid reverse intersystem crossing rate (kRISC). Furthermore, compared to toluene, the stacking patterns of ICz-BP and ICz-DPS in the solid effectively suppress the out-of-plane wagging vibration of the acceptor, thereby inhibiting the loss of nonradiative energy in the excited state and realizing aggregation-induced emission. Moreover, the charge transport properties of both electrons and holes in ICz-BP are found to be higher than the corresponding rates in ICz-DPS, attributed to the smaller internal reorganization energy of ICz-BP in the solid state. Additionally, the calculations reveal a more balanced charge transport characteristic in ICz-BP, contributing to efficient exciton recombination and emission and ultimately mitigating efficiency roll-off. Based on these computational results, we aim to unveil the relationship between molecular structure and light-emitting properties, aiding in the design and development of efficient AIE-TADF devices.

Enabling robust blue circularly polarized organic afterglow through self-confining isolated chiral chromophore

Creating circularly polarized organic afterglow system with elevated triplet energy levels, suppressed non-radiative transitions, and effective chirality, which are three critical prerequisites for achieving blue circularly polarized afterglow, has posed a formidable challenge. Herein, a straightforward approach is unveiled to attain blue circularly polarized afterglow materials by covalently self-confining isolated chiral chromophore within polymer matrix. The formation of robust hydrogen bonds within the polymer matrix confers a distinctly isolated and stabilized molecular state of chiral chromophores, endowing a blue emission band at 414 nm, lifetime of 3.0 s, and luminescent dissymmetry factor of ~ 10−2. Utilizing the synergistic afterglow and chirality energy transfer, full-color circularly polarized afterglow systems are endowed by doping colorful fluorescent molecules into designed blue polymers, empowering versatile applications. This work paves the way for the streamlined design of blue circularly polarized afterglow materials, expanding the horizons of circularly polarized afterglow materials into various domains.

Synthesis of Naphthalimide Azocarboxylates Showing Turn-On Fluorescence by Substitution Reaction with Sulfinates.

The synthesis and characterization of sulfinate addition-responsive fluorescent molecules are described. We found that addition reaction of sulfinates to naphthalimide-substituted azocarboxylates afforded the corresponding sulfonyl hydrazides with high fluorescence quantum yields (up to 0.91 in THF and 0.54 in methanol), which exhibited a large Stokes shift (105 nm) in protic methanol solvent, while the unsubstituted hydrazide and the sulfonyl-position isomer showed no fluorescence in polar solvents.