Fluorescence Behavior Research Articles

Exploring the Interplay of Wavelength, Quantum Yield, and Penetration Depth in In Vivo Fluorescence Imaging.

The intricate interplay between the irradiation wavelength, the fluorophore quantum yield (QY) and penetration depth profoundly influences the efficacy of in vivo fluorescence imaging in various applications. Understanding the complex behavior of fluorescence in vivo, specifically how variations in wavelength affect the QY of commonly used dyes and the depth of imaging is crucial for optimizing fluorescence imaging techniques, as it directly impacts the accuracy and efficiency of imaging in biological tissues. In our study, we explore these dynamics through Monte Carlo simulations conducted under conditions reflective of wide-field fluorescence imaging, examining how variations in wavelength impact the dye's QY and depth of imaging, and consequently, the fluorescence behavior. A transition in the exponential decay of the emission depth exponent is observed around the 500-600nm range, indicating varying degrees of influence of depth on the fluorescence emission. The analysis of the fluorophore's QY reveals wavelength-dependent variations, with the most significant impact observed in the 600-700nm range. Moreover, we continued our investigation to explore multiplexing, unveiling insights into the spacing between identical spots in multiplexing images across various depths and wavelengths.

On-Off Switching of Singlet Self-Trapped Exciton Emission Endows Antimony-Doped Indium Halides with Excitation-Wavelength-Dependent Luminescence.

Excitation-wavelength-dependent (Ex-De) emitters are a fascinating category of luminescent materials whose emission properties vary with the wavelength of the light used for excitation. Antimony (Sb3+)-doped indium (In)-based metal halides are efficient light emitters; however, the peak fluorescence emission of most Sb3+-activated In-halide remains independent of the excitation wavelength. Here, the study introduces a new Sb3+-doped In-halide cluster, (BDPA)2InCl5:Sb (BDPA+ = C15H18N+, benzyldimethylphenylammonium), which demonstrates efficient Ex-De emission originating from the on-off switchable fluorescence behavior of singlet self-trapped exciton (STE) in 5-coordinate Sb3+ dopant. Interestingly, when excited within the range of 240-370nm, photoluminescence (PL) spectra of (BDPA)2InCl5:Sb show both singlet and triplet STE emission. However, under excitation wavelengths of 370 to 420nm, the singlet STE emission is absent, resulting in a noticeable correlated color temperature change from 1700 to 3800 K. The study provides a new approach to designing color-tunable Sb3+-based luminophores, and also presents a novel application scenario for the widely recognized Sb3+ doping strategy.

Fluorescence Enhancement of Nonemissive Monodeprotonated Luteolin in a Poly(vinyl alcohol) Film.

Solid polymer matrixes can modulate the electronic states of embedded chromophores and have been widely used in flexible optoelectronic and optical materials. Luteolin is one of the most common natural flavonoids, and its neutral and monodeprotonated forms are nonemissive in aqueous solution induced by ultrafast excited-state proton transfer (ESPT) followed by nonradiative relaxation. In this study, we have incorporated luteolin into poly(vinyl alcohol) (PVA) films and studied their fluorescence behaviors. Neutral and one monodeprotonated luteolin coexist in the PVA film. Weak steady-state fluorescence of neutral luteolin peaking at about 440 nm is observed for the first time. In addition, the monodeprotonated luteolin in PVA film exhibits obvious fluorescence peaking at 500 nm, with a fluorescence quantum yield of as high as 0.4 and a fluorescence lifetime of as long as 2.4 ns. Time-dependent density functional theory calculations have determined that the ESPT of neutral luteolin is barrierless but that of monodeprotonated luteolin needs to surmount a barrier, explaining their distinct emission properties. These results indicate the modulation ability of the PVA film in both ground-state deprotonation and ESPT, broadening the application areas of the solid polymer matrix.

High contrast stimuli-responsive fluorescence emitters based on carbazole-cyanostilbene derivatives with aggregation induced emission properties

Due to the aggregation induced emission (AIE) materials exhibiting obvious fluorescent emission changes under the external stimuli of heat, solvent, force and so on, significant efforts have been directed toward developing AIE-active materials with high contrast stimuli-responsive fluorescence behaviors. Herein, three electron-donor(D)-electron-acceptor(A) and D-A-D type organic fluorescence emitters of Cz-DC-tBu, Cz-DC-CN and Cz-DC-OMe were facilely synthesized using carbazole group as D unit and cyano group as A unit. They showed typical AIE features and exhibited remarkable color changes under mechanical force and in different polarity solvents, respectively. The stimuli-responsive mechanism of the compounds were investigated by powder X-ray Diffraction (PXRD) and density functional theory calculations (DFT), which revealed that the mechanofluorochromic behaviors were associated with the molecular packing modes, and the solvatochromic effects were caused by the intramolecular charge-transfer transition (ICT) effect. Significantly, it was found that Cz-DC-tBu showed high contrast stimuli-responsive behaviors through adjusting the substituent groups on the cyanostilbene unit with CN, OMe, and tBu groups, respectively. This study provided a new strategy for the design of AIE-active stimuli-responsive fluorescence emitters, and made them possible using in stress sensors, chemical detection, memory storage, anti-counterfeiting applications.

INVESTIGATION OF FLUORESCENCE EFFECTS OF EU(TTA)3(H2O)2 AND EU(TTA)3(PHEN) COMPLEXES IN THE PRESENCE OF OTHER LANTHANIDE METAL IONS

In this study, we explore the fluorescence behavior of Eu(TTA)3(H2O)2 and Eu(TTA)3(Phen) complexes in the presence of various other lanthanide metal ions, with the objective of ensuring diversity in the raw material sources for military purposes. The fluorescence properties of these complexes are investigated to understand their potential interactions with other lanthanide ions and their effects on fluorescence emission. Spectroscopic analysis is conducted to examine how the presence of different lanthanide ions influences the fluorescence emission of Eu(TTA)3(H2O)2 and Eu(TTA)3(Phen) complexes. Product structure characteristics are determined by IR, UV-Vis, and EDX spectroscopy. The optical properties of the complex are studied by fluorescence spectroscopy. The results indicate that the structure EuxM1-x(TTA)Phen (M: Tb, Nd, Pr; x = 0.1; 0.5; 0.9; 1.0) gives stronger luminescence at ignited wavelengths λex = 385 nm.

Benchmarking luminescent properties of the arylvinylpyrimidine scaffold.

The exploration of the photophysical properties of push-pull molecules incorporating pyrimidine rings as electron-attracting moieties in their structure continues to be a fascinating area of investigation. A thorough examination of these properties not only contributes to fundamental knowledge but also provides crucial insights for the rational design of emissive materials in prospective applications. In this context, this work conducts an in-depth analysis of four families of 4,6-bis(arylvinyl)pyrimidines, evaluating the influence of substituents on both the aryl groups and position 2 of the pyrimidine ring. While previous research has primarily focused on solution studies, this work emphasizes the importance of examining solid-state photophysics. Through a multidisciplinary approach encompassing optical techniques, x-ray diffraction, and quantum chemical calculations, a comprehensive understanding of the structure-property relationships is achieved. This study underscores the intricate interplay between molecular structure, aggregation, and fluorescence behavior in pyrimidines, offering valuable insights with broader implications beyond academic realms.

Synthesis, Optical, Electrical, Fluorescence, Dielectric, Thermal, and Mechanical Characterization of 3-Aminopyridine (Scaffold in Drugs) Single Crystal

Objectives: To screen the optical, electrical, fluorescence, dielectric, thermal, and mechanical behavior of the 3-aminopyridine single crystal for its suitability in optoelectronic applications. Methods: A good single crystal of 3-aminopyridine (3-AP) was grown by the slow evaporation method. Findings: The lattice parameters of the grown crystal were determined using a single crystal X-ray diffractometer as, a = 6.184 (4) Å, b = 15.350 (6) Å, c = 5.361 (7) Å and the required functional groups C-N, NH2 bonds of 3-AP were recognized by the FTIR studies. The grown crystal was screened using the UV-Vis-NIR spectrum to understand the transmission and absorption character of the crystal. The various optical constants such as absorption coefficient, optical conductivity, and electrical conductivity of the crystal have been determined from the UV-Vis transmission plot. The lower cut-off wavelength of the 3-AP crystal was observed at 250 nm. The band gap of the grown crystal is found to be 4.5 eV. The emission property of the crystal was studied using fluorescence spectra. Violet, blue, and red emissions are observed from the fluorescence spectra. Thermal screening of the 3-AP crystal was performed using TGA and DTA. The 3-AP crystal remains stable up to 220 ºC and then the crystal begins to decompose up to 260 ºC due to the loss of the -NH2 group of the 3-aminopyridine. The Vickers hardness test revealed the nature of the material as soft type with Meyer’s index (n) of 2. The electronic polarization behavior of the crystal was examined using the dielectric study. Novelty: The lower cut-off wavelength of 250 nm, wide band gap of 4.5 eV, excellent transparency in the entire visible and near-infrared region, violet, blue, and red emission by the material are the distinguishing and mandatory features for optoelectronic applications. These features are good as compared to the 3-AP derivatives reported earlier. Keywords: Unit cell, Absorption, Emission, Conductivity, Strength, Loss

Mercaptopropionic acid-capped CdZnTe Quantum dots as Fluorescence Probe for Sensitive Detection of Cr(III) ions.

Although Cr(III) ions are essential for the human body, excessive amounts can lead to skin inflammation, allergic reactions, and genotoxicity. A highly sensitive fluorescence probe was developed using mercaptopropionic acid (MPA) capped CdZnTe quantum dots (QDs) synthesized via an aqueous solution heating method for precise detection of Cr(III) ions. The synthesized MPA-CdZnTe QDs had a size of 2.38 ± 0.13nm and exhibited a zinc-blende structure, with MPA molecules effectively capping the surface through Cd-S bonds. Investigation into the effects of reflux times and solution pH on the absorption and fluorescence spectra of MPA-CdZnTe QDs revealed the occurrence of Ostwald ripening during prolonged reflux processes. The quantum yield (QY) of the synthesized CdZnTe QDs could reach 89%, and the QY was higher under acidic conditions than alkaline. Leveraging the quenching effect of Cr(III) ions on MPA-CdZnTe QDs, a robust method for the quantitative detection of trace amounts of Cr(III) ions was established. Linear quenching behavior was observed within the concentration range of 3.33 × 10- 6 to 5.00 × 10- 4 mol L- 1 for Cr(III) ions, with the fluorescence quenching rate described by a linear regression equation: 1-F/F0 = 0.218 + 829.5268CCr(III). The limit of detection was determined to be 2.63 × 10- 6 mol L- 1. The mechanism of the fluorescence behavior of MPA capped CdZnTe QDs towards Cr(III) ions was photo-induced electron transfer.

Synthesis and characterization of 3,5-bis((2-hydroxybenzylidene)amino)-N-(2-hydroxyphenyl)benzamide and Zn(II) complex: Investigation of chromic, fluorescence and DPPH radical scavenging behaviours

Novel amido-Schiff base 3,5-bis((2-hydroxybenzylidene)amino)-N-(2-hydroxyphenyl)benzamide (2a) has been obtained by the reaction of Schiff base 1a with 2-hydroxyaniline in the presence of coupling agent N,N′-dicyclohexylcarbodiimide. Schiff base (1a) which serves as the starting compound in amide synthesis was produced from the condensation of 3,5-diaminobenzoic acid with salicylaldehyde in a 1:2 mol ratio. Tetrahedral geometry with 1:1 [M:L] stoichiometry Zn(II) complex (3a) was newly synthesized by the complexation reaction of ligand 2a with zinc(II) nitrate. 1a and 2a displayed a broad emission band at λem = 456 and 472 nm with a blue fluorescent in pure DMSO, while 3a emitted a strong greenish-blue fluorescent with the λem = 485 nm (λexc = 365 nm). The fluorescence efficiency of 1a was poor compared to the others. The λem in aqueous DMSO solution (v/v, 1:1) had ∼8–33 nm red-shift with respect to that of pure solution. The λem gave ∼1–15 nm red-shift with very low emission efficiency in acidic DMSO media. The results suggested that the aggregation caused quenching properties of 1a–3a in pure, aqueous, and acidic DMSO system with a 50 % water fraction. The fluorescence of the compounds appeared to be visibly very bright in basic DMSO media. All the compounds were also screened for antioxidant activity using UV–Vis spectroscopy. They were found to be not effective DPPH radical scavengers in DMSO.

A Programmable 2D/3D Anti‐Counterfeiting System via Shape Memory Polymer with Surface Wrinkle and Fluorescence

AbstractThe issue of counterfeiting has always been a major challenge in today's society, putting forward high requirements for anti‐counterfeiting technology. Here, a promising 2D/3D anti‐counterfeiting security system is developed based on anthracene‐functionalized poly(styrene‐butadiene‐styrene) (SBS‐CAN), which possessed the physical unclonable self‐wrinkling patterns, fluorescence, and shape memory behavior. By controlling the dimerization of anthracene groups with ultraviolet light and external pre‐stretched operation, 2D information with surface wrinkle and fluorescence is achieved, allowing for the design of security systems based on actual needs. Furthermore, 3D structures constructed based on the shape memory behavior can further be utilized to encrypt these 2D information, enhancing the security level and weakening the cloneable risk of surface wrinkle and fluorescence for further. This programmable 2D/3D anti‐counterfeiting system has multiple advantages over the commonly used fluorescent wrinkled tag or fluorescent shape memory label, providing an intelligent choice for high‐security information carriers.

Molecular Fractionation of Ancient Organic Compounds in Deeply Buried Halite Crystals.

The molecular fractionation of organic compounds through adsorption in minerals has wide implications, including tracing the origins of life, carbon sequestration, and climate change. Here we present the first in situ examination of molecular fractionation within individual crystals via optical-photothermal infrared (O-PTIR) spectroscopy. Our study focuses on a unique inclusion trail within deeply buried halite crystals, characterized by a distinctive orange-to-blue fluorescence gradient, providing primary evidence of molecular variation in ancient carbon-based fluids within the inclusion trail. The findings reveal a trend in the CH2/C=O and CH3/C=O ratios, conforming with a consistent decrease from the blue fluorescence region to the orange fluorescence region. The chemically influenced fluorescent behavior of these ancient liquid carbon-based compounds is attributed to the fractionation of fluids in the inclusions as a result of microfractures within the crystal acting as chromatography capillaries. These capillaries facilitated interactions between specific organic compounds, serving as adsorbates, and the halite mineral, representing the adsorbent. Our study provides insights into the fluid-solid physicochemical interactions within extreme environments and extends our understanding of molecular processes in such settings.

Fluorescent polymers for environmental monitoring: Targeting pathogens and metal contaminants with naphthalimide derivatives

Monitoring Hg2+ levels in aqueous environments is crucial to assess the potential methylmercury contamination via bacterial conversion, however, existing methods often require extensive sample treatment and expensive equipment. To mitigate this issue, this study examines the synthesis and application of three naphthalimide-based compounds, with significant fluorescent and solvatochromic behavior (C1, C2, and C3). Compounds C1 and C2 demonstrated a strong affinity for Hg2+ metal ions, with C2 showing selectivity and a strong antibacterial profile, particularly against S. aureus (MIC50 (C2) = 0.01 µg/mL). Moreover, these compounds were incorporated into three polymeric matrices, namely polyvinyl chloride (PVC), poly (methyl methacrylate-co-methacrylic acid) (PMMMA), and Starch, allowing for the development of solid-support sensors/surfaces with a strong antibacterial profile, highlighting the inherent dual-functionality of the compounds. Interestingly, the C2-doped Starch biopolymer detected low concentrations of Hg2+ ions, such as 23 nM in tap water (value within the WHO standards for drinking water), through a rapid spectroscopic evaluation without sample treatment. This biopolymer was generated via a sustainable, green-chemistry-oriented, temperature-dependent water/Starch synthetic route, without the addition of plasticizers and any associated ecotoxicity. The study used sustainable methods for environmental monitoring and antibacterial applications, advancing material science to offer effective, accessible, and eco-friendly solutions for detecting and mitigating mercury pollution and bacterial contaminations, enhancing environmental and health safety.

Green florescent carbon dots synthesized from various household green wastes for detection of parathion methyl pesticide

The purpose of the current study was to examine the use of green household wastes, such as lemon peel, bottle gourd peel (BG), culinary banana peel, and sugarcane bagasse, as a source for synthesizing carbon dots (C-dots) and to determine how the composition of the material affected the functional characteristics of the C-dots and its interaction behaviour for detection of pesticide. The synthesized C-dots showed green fluorescence with varying particle sizes and red shifting fluorescence with more than 100 nm Stokes shift, indicating time and excitation dependent luminescence behaviour. C-dots produced from bottle gourd (BG) peel had a positive impact on the functional characteristics with a maximum emission of 514 nm and excitation of 410 nm. The SAED and TEM pattern confirmed its amorphous structure. The hydronium ion diameter and the quantum yield were 0.99 nm and 3.1 % respectively. Contributing towards food safety, the synthesized C-dots from BG showed significant behaviour in the detection of parathion methyl (MP) like organophosphorus pesticide (OP) as it conjugated with iron and 1 ppm of parathion methyl, which exhibited “Turn-Off-On” fluorescence behaviour with noticeable changed in intensity and act as a promising qualitative tool for detection of parathion methyl in real sample. The intensity of FL and concentration of OP is directly proportional which is established by the investigated OP in vegetable, fruit and water samples. The significance of iron and MP-OP was also investigated in the presence of other metal ions and pesticides and showed that the C-dots synthesized probe solution was reliable and sensitive towards the detection of MP-OP in real samples.

A chitosan-based near-infrared ratiometric fluorescent nanoprobe created by molecular assembly with applications in hypochlorous acid detection in live mouse

Hypochlorous acid (HClO/ClO−) is a key reactive oxidative species (ROS) in the body. The HClO/ClO− concentrations are imbalanced during cancer formation due to the ROS stress response. This paper introduces a novel chitosan-based self-calibration fluorescent nanoprobe (ChCyNil) constructed by molecular assembly for the ratiometric detection of HClO/ClO−. Two chromophores with different fluorescence characteristics and HClO/ClO− sensitivity were labeled on chitosan, and nanoparticles were prepared by a self-assembly strategy for HClO/ClO− detection. ChCyNil exhibits several advantages, such as dual near-infrared emissions at 670 nm and 845 nm, tunable fluorescence intensity, self-calibration fluorescence, and good biocompatibility, improving its accuracy in HClO/ClO− detection. Our study confirmed that ChCyNil exhibits a well-assembled spheroidal nanostructure and good photophysical properties in solution. The fluorescence imaging properties were further proved by detecting endogenous HClO/ClO− produced by LPS/PMA stimuli in cells and zebrafish. In addition, ChCyNil was used to detect the fluorescence behavior of HClO/ClO− in tumors of live mice. The successful design and fabrication of ChCyNil have presented a new strategy for constructing detection tools with improved fluorescence properties for HClO/ClO− in live animals.

Reducing the water quenching processes using heavy water in capillary electrophoresis with fluorescence detection

Water, ubiquitous in analytical methods, is renowned for its fluorescence quenching properties, influencing techniques like fluorescence spectrophotometry or techniques with fluorescence detection. This study explores the impact of water (H₂O) substitution for heavy water (D₂O) on the fluorescence behavior of anthraquinones and anthracyclines. Anthraquinones and anthracyclines play crucial roles in pharmacy, serving as essential components in various therapeutic formulations, particularly in cancer treatment and other pharmacological interventions. Capillary electrophoresis (CE) with heavy water as the background electrolyte (BGE) solvent offers superior sensitivity to the separation and detection of these analytes. Experimental results demonstrate the improved detection limits and separation efficiency of selected anthraquinones rhein (RH), aloe-emodin (AE), and anthracyclines doxorubicin (DOX), epirubicin (EPI) and daunorubicine (DAU) in heavy water-based buffers, highlighting the potential of heavy water in advancing analytical chemistry.

A pyrene-based hydrogen-bonded framework with excimer induced ratiometric emission for discriminative luminescence detection of metal ions

Discriminatory fluorescence detection of various metal ions is of significant importance in environmental and health-related applications. A luminescent hydrogen-bonded organic framework (HOF) material, PFC-1 was synthesized using 1,3,6,8-tetra(4-carboxylbenzene) pyrene (H4TBAPy) as the organic building block. The fluorescence behavior of PFC-1 is influenced by the concentration of the suspension, demonstrating different emissions characteristic of monomer and excimer fluorescence, which are highly sensitive to the surrounding environment. This allows for the potential differentiation and sensing of different target analytes. PFC-1 showed discriminatory fluorescence sensing performance towards metal ions such as Al3+, Sc3+, Cr3+, and Cu2+, with changes in fluorescence intensity, emission peak shifts, and intensity ratio changes between monomer and excimer emissions. Furthermore, a smartphone-based detection strategy was proposed, leveraging color recognition capabilities of smartphones for onsite and real-time sensing. The work demonstrate that PFC-1 is a promising material for the development of portable, cost-effective fluorescent sensors for onsite and real-time detection of metal ions. The integration of PFC-1 with smartphone technology paves the way for practical applications in environmental monitoring, industrial processes, and healthcare diagnostics.

Bimetallic complexation for significant fluorescence enhancement of faecal pigment towards water quality testing

Systematic spectroscopic investigations revealed bimetallic complexation of faecal pigments (FP) in waterthrough their multiple binding sites. FP-Zn(II)/Gd(III) complexes showed narrow emission (FWHM ∼ 26 nm) with maximum intensity compared to different bimetallic complexes in water. The fluorescence intensity of bimetallic Zn(II)/Gd(III) complexes of FP increased ∼3–5 fold in aqueous media compared to the FP-Zn(II) complexes, i.e. well-known as Schlesinger’s test. The optimum Zn(II): Gd(III) stoichiometry was observed at 3:2 for maximum FP fluorescence enhancement. The bimetallic FP-Zn(II)/Gd(III) complexes also exhibited higher fluorescence lifetimes and quantum yield than FP-Zn(II) complexes. The photophysical investigations demonstrated that bimetallic Zn(II)/Gd(III) complexation increased the rigidity of chromophores present in FP. Consequently, a decrease in non-radiative decay rate constants (knr) by ∼ 1.5 times was observed for bimetallic complexes compared to FP-Zn(II) in water. Hence, a detection limit of the nanomolar concentration range of FP could be achieved in the aqueous media. The effect of diverse interfering factors (humic acid, water hardness, pH) on the fluorescence behaviour of FP-Zn(II)/Gd(III) complexes was also investigated with an approach mimicking real water samples. Finally, a simple non-extraction analytical approach for sensitive detection of FP in water was demonstrated while also considering the fluorescence matrix interference problem.

Nonconventional Fluorescent Non‐Isocyanate Polyurethane Foams for Multipurpose Sensing Applications

Fluorescent foams with interconnected pores are attractive for the detection and quantification of various products. However, many fluorescent probes are suffering from aggregation‐caused fluorescence quenching in their solid/aggregated state, are costly, and/or not straightforward to incorporate in foams, limiting their utility for this application. Herein, non‐isocyanate polyurethane foams, prepared by the simple water‐induced self‐blowing process, present a nonconventional fluorescence behaviour, i.e. they are intrinsically fluorescent with a multicolor emission without requiring ex‐situ traditional fluorescent probes. These foams demonstrate utility for capturing‐sensing gaseous formaldehyde (an emblematic indoor air pollutant), as well as for detecting and quantifying various metal ions (Fe2+, Cu2+, Fe3+, Hg2+). They are also able to selectively sense tetracycline antibiotic in a ratiometric way with a high sensitivity. By exploiting the unique multicolor photoluminescent foam properties, a smartphone‐compatible device is used for the facile antibiotic quantification. This nonconventional fluorescence behaviour is discussed experimentally and theoretically, and is mainly based on clusteroluminescence originating from multiple hydrogen bonding and hetero‐atomic sub‐luminophores, thus from aggregation‐induced emission luminogens that are naturally present in the foams. This work illustrates that easily accessible non‐conventional fluorescent NIPU foams characterized by a modular emission wavelength have an enormous potential for multiple substrates detection and quantification.

Nonconventional Fluorescent Non-Isocyanate Polyurethane Foams for Multipurpose Sensing Applications.

Fluorescent foams with interconnected pores are attractive for the detection and quantification of various products. However, many fluorescent probes are suffering from aggregation-caused fluorescence quenching in their solid/aggregated state, are costly, and/or not straightforward to incorporate in foams, limiting their utility for this application. Herein, non-isocyanate polyurethane foams, prepared by the simple water-induced self-blowing process, present a nonconventional fluorescence behaviour, i.e. they are intrinsically fluorescent with a multicolor emission without requiring ex situ traditional fluorescent probes. These foams demonstrate utility for capturing-sensing gaseous formaldehyde (an emblematic indoor air pollutant), as well as for detecting and quantifying various metal ions (Fe2+, Cu2+, Fe3+, Hg2+). They are also able to selectively sense tetracycline antibiotic in a ratiometric way with a high sensitivity. By exploiting the unique multicolor photoluminescent foam properties, a smartphone-compatible device is used for the facile antibiotic quantification. This nonconventional fluorescence behaviour is discussed experimentally and theoretically, and is mainly based on clusteroluminescence originating from multiple hydrogen bonding and hetero-atomic sub-luminophores, thus from aggregation-induced emission luminogens that are naturally present in the foams. This work illustrates that easily accessible non-conventional fluorescent NIPU foams characterized by a modular emission wavelength have an enormous potential for multiple substrates detection and quantification.

Constructing ESIPT-Capable α-Cyanostilbene Luminogens: Influence of Different Aromatic Substitutions Tethered to H-Acceptor (CH = N) on Photophysical Properties, Cu2+ and Fe3+ Detection.

Herein, two excited-state intramolecular proton transfer (ESIPT)-capable α-cyanostilbene luminogens were synthesized by Schiff base reaction of salicylaldehyde-like α-cyanostilbene candidate with 1-naphthylamine and 3-biphenylamine, respectively. We systematically analyzed their photophysical properties compared with their analogue, and demonstrated that their fluorescence behaviors could be elaborately modulated by different aromatic substitutions tethered to H-acceptor (CH = N). In virtue of the outstanding solid fluorescence, the 3-biphenylamine-decorated fluorophore was applied for monitoring Cu2+/Fe3+ qualitatively on the TLC-based test strip in real time and sensing Cu2+/Fe3+ quantitatively in the THF/H2O medium (fw = 90%, pH = 7.4). When the probe chelated with Cu2+/Fe3+, similar "turn-off" fluorescence signal outputs were triggered. From the fluorescence titration experiments, the detection limits were evaluated as 7.97 × 10- 8 M for Cu2+ and 8.24 × 10- 8 M for Fe3+, and the binding constant (Kα) values of the complexes were found to be 7.80 × 104 M-1 for Cu2+ and 9.06 × 104 M-1 for Fe3+. Job's plots indicated that probe complexed with Cu2+/Fe3+ in a 2:1 binding stoichiometry ratio. Furthermore, the probe was used to accurately quantify the Fe3+ spiked in real water specimens. This study offered a new perspective to construct ESIPT-capable α-cyanostilbene luminogen as the potential luminescent probe.