Fluid Flow History Research Articles

Transverse faulting in the Paradox Basin, Colorado Plateau, USA: Active, intermittent faulting over a 300 million year history of strain accommodation and fluid flow

The Paradox Basin (Colorado Plateau, USA) is dominated by major, first-order northwest-trending structures commonly 40 km or more in trace length, including (1) regional salt wall corridors related to passive diapirism during Pennsylvanian to Jurassic time, (2) gentle upright folds produced by Laramide shortening during the Late Cretaceous through early Cenozoic, (3) late Laramide normal faults, and (4) normal faults representing Neogene salt dissolution collapse. Less obvious at a regional scale are the fault zones aligned perpendicular (northeast-trending) to the dominant structural grain. There are 16 such faults zones, marked by short trace lengths (3−12 km), small offsets (10−100 m), and predominantly extensional kinematics. Based on published geological maps, field observations of fault zone properties (including fluid flow indicators), and kinematic analysis, we interpret these structures as transverse accommodation faults. Co-spatial structural associations reveal the transverse fault zones were active intermittently, likely as a means of minimizing along-strike strain incompatibility that accrued along the first-order structures as they evolved during late Paleozoic to Late Jurassic halokinesis, (mild) Late Cretaceous to Eocene folding, late Laramide normal faulting, and Neogene to recent collapse faulting. Locally, transverse faulting was influenced by reactivation of northeast-striking faults that offset sub-salt formations, including basement. Active, intermittent transverse faulting over the past ∼300 m.y. is consistent with the synthesis of published interpretations and age determinations focusing on the timing of diverse fluids that exploited the permeability of the transverse fault zones. The Paradox Basin, with its enormous subsurface salt volume and enduring fluid flow, has been an ideal dynamic environment for producing intermittently active transverse accommodation faulting.

Deformation and fluid flow history of a fractured basement hydrocarbon reservoir below the Sab'atayn Basin, Habban Field, Yemen

Fractured crystalline basement reservoirs are of increasing economic interest for oil and gas exploration and subsurface fluid storage. The successful characterization of these reservoirs is commonly challenged by their structural heterogeneity, complexity in fracture distribution and flow properties at multiple scales, and the difficulty of imaging fractures in exploration seismic. We analyzed the fracture geometry and fracture diagenetic attributes in two oriented cores from the Habban Field in the Late Jurassic Sab'atayn Basin (Yemen) to evaluate the multi-phase deformation history and fracture flow pathway evolution for (hydrothermal) fluids and hydrocarbons. Analyses included petrographic and fluid inclusion analysis of fracture-filling cements, and stable sulfur isotope analyses of fracture-filling pyrite.The Paleoproterozoic basement consists of amphibolite-facies metamorphic ortho- and paragneiss cut by several phases of Neoproterozoic granitoid intrusions. The investigated lithologies in the drill cores comprise (1) epidote quartzite, (2) amphibolite, (3) monzogranite, (4) meta-arkose, and (5) quartz-feldspar porphyry. These lithologies show an inhomogeneous fracture network that is partially cemented. Ediacaran brittle-ductile deformation (D1) recognized only within a Pan-African monzogranite lead to cataclasis and porosity generating alteration. Late Jurassic – Early Cretaceous extension (D2) related to the break-up of Gondwanaland and the formation of the Sab'atayn Basin is found in all lithologies and likely resulted in pervasive quartz cementation. Late Jurassic fractures parallel to the NW-SE trending long axis of the Sab'atayn Basin are best recognized in a strongly foliated amphibolites. Cenozoic extensional fracturing (D3) reactivated older structures, which probably formed during activity of the Neoproterozoic Najd Fault System and caused multi-phased (pyrite-(saddle) dolomite-calcite) fracture cementations. The sulfur isotope compositions of pyrite with δ34S values ranging between −17.4 and + 26.4‰ vs. V-CDT reflects the variability of the fluid source during sulphide mineral formation from hydrocarbon-rich hydrothermal solutions. Fluid inclusions indicate that cementation reactions occurred in a relatively narrow temperature field between 120 °C and 140 °C, ideal for hydrocarbon maturation. Our results demonstrate the potentially complex charge history of basement reservoirs, involving multiple phases of fracture formation and cementation, and fluid charge episodes.

Geological conditions and fluid flow history that lead to the development of large clastic dykes in basins: A case study from Kushiro, Japan

AbstractLarge clastic dykes (the Harutori‐Taro and Harutori‐Jiro dykes) and smaller dykes are exposed in the underground Kushiro Coal Mine (KCM), Japan. This study examines these dykes as a case study to investigate the geological conditions and fluid flow history that lead to the development of large clastic dykes in basins. The composition of the dykes indicates the Beppo and/or Harutori formations as their parent unit. Crystallite size distribution (CSD) analysis reveals Ostwald ripening of the kaolinite in the kaolinitised feldspar from the dykes, suggesting stagnant conditions in the parent unit before the dyke was formed. In contrast, smectite CSDs and the high carbonate content of the dykes suggest that large volumes of fluid flowed through the dykes along the established hydraulic gradient, which was triggered by the breaking of the upper seal. The isotopic and chemical compositions of the calcite and aragonite in the dykes, with moderate siderite and rhodochrosite content, indicate the fluid was a warm (>30°C) mixture of freshwater and saltwater, which was transferred from deeper levels of the parent unit towards the crest of an anticline. Immediately after sand injection, the semi‐closed system of the parent unit near the root of the large dyke was transformed into a major flow channel for overpressurised fluids. Subsequently, a large volume of fluid flowed along the vertical conduit (or dyke) over a long period of time (>1 Myr), which removed fluid from a widespread area (i.e., several hundred square kilometres) of the basin. The results show that thin parent units, poor lateral continuity of the upper seal, and spatially heterogeneous overpressurisation do not preclude the formation of large dykes.

Origin of calcite cements in the Permian Lucaogou Formation tight reservoirs, Jimsar sag, Junggar basin, NW China: Constraints from geochemistry

Understanding the diagenetic evolution of carbonate cementation in hydrocarbon reservoirs is critical to better reconstruct the history of fluid flow during petroleum accumulation. The extensive occurrence of carbonate cements within the lower Permian Lucaogou Formation tight reservoirs is regarded as a major diagenetic factor that causes strong hydrocarbon reservoir heterogeneities. Petrographic and geochemical analyses, including optical microscopy fitted with cathodoluminescence, scanning electron microscopy, carbon and oxygen stable isotopes, in situ rare earth element, as well as fluid inclusion microthermometry, were carried out to decipher the origin of calcite cementation and understand its control on reservoirs quality. Petrography shows that the precipitating cements mostly consist of pore-filling blocky/mosaic calcite, with a dull orange luminescence color. Chondrite-normalized rare earth element (REE) patterns and C–O isotopic compositions of these calcite cements exhibit strongly negative Eu and Tb anomalies, enrichment in light REE, positive carbon (δ13CPDB = 0.58‰–7.45‰) and negative oxygen (δ18OPDB = −11.38‰ to −8.61‰) isotopic values, similar to the dolostone and micritized peloidal grains, suggesting that the calcite-precipitating fluids were derived from dissolution of lacustrine depositional carbonates. The relative timing of calcite precipitation in reservoirs was constrained based on the thermal-burial history of the study region and precipitation temperatures obtained from fluid inclusions. The results show that this cementation episode mainly occurred during the Late Triassic to Early Jurassic, which was synchronous with the tectonic uplift event. Moreover, homogenization temperatures of fluid inclusions and geochemical signatures of the calcite cement are similar to those of the fracture-fillings, suggesting that these two calcite phases may be genetically related and form coevally within one fluid flow system. It can be interpreted as a response to the compressional tectonic deformation given by the collision of the Qiangtang Block with the Eurasia Plate. This tectonic deformation event is regarded as the driver for calcite precipitation during the early burial stage, resulting in a considerable reduction of reservoir quality. Calcite cementation is pervasive and may play a main role in halting hydrocarbon migration through some of the permeable pathways in reservoirs.

In situ U-Pb dating of carbonate veins in Cambrian shales constrains fluid flow and hydrocarbon evolution at the southeastern margin of the Upper Yangtze platform, southwestern China

Fluid flow in sedimentary basins not only impacts redistribution of the geothermal cycle and precipitation of ore deposits, but also exerts control on hydrocarbon migration and accumulation. However, reconstructing the history of fluid flow in basins that have experienced multiple tectonic deformation events is exceedingly difficult. Here, we examined petrography, in situ U-Pb geochronology, and rare earth element (REE) and C-O isotope geochemistry, as well as fluid inclusion microthermometry of fracture fillings within the Cambrian Niutitang Formation shales at the southeastern margin of the Upper Yangtze platform, southwestern China. The results show that four main fluid flow pulses are identified based on cathodoluminescence images, U-Pb ages, and geochemical data, namely, 446−428 Ma (fibrous calcite and barytocalcite), 343−329 Ma (calcite I), 113 Ma (calcite II), and 63 Ma (calcite III). The fibrous calcite (ca. 446 Ma) and barytocalcite (ca. 428 Ma) veins, corresponding to the late Caledonian Orogeny, show significantly positive Eu-Y anomalies, negative Ce anomalies, and enrichment in heavy REE, similar to their host rocks, suggesting that the mineral-forming fluids were derived mainly from dissolution of the host rocks. An abundance of bitumen inclusions with homogenization temperatures (Th) of 93.1−137.4 °C and high salinities (5−8 wt%) indicate that the first fluid flow pulse occurred during the oil generation stage in a closed fluid system. Calcite I (ca. 343−329 Ma) exhibits REE depletion and high Y/Ho ratios, a low fluid inclusion salinity (2−10 wt%) with Th = 78.4−125.8 °C, and C-O isotopic compositions similar to the underlying marine carbonates. This suggests that calcite I formed in an open fluid system, which was related to the transition from compression to extension during the Hercynian Orogeny. The pre-existing faults were reactivated and opened, resulting in the leakage and reconstruction of hydrocarbon reservoirs. Calcite II (ca. 113.4 Ma) has similar REE+Y patterns and C-O isotopic compositions to the host rocks. It contains abundant single-phase hydrocarbon gas (CH4) inclusions with high Th (164.1−211.1 °C) and salinity (6−14 wt%) values, indicating that the third phase fluid was derived largely from the host rocks and migrated during the early Yanshanian Orogeny. Lastly, calcite III (ca. 62.7 Ma) exhibits extremely low REE concentrations, low δ13CPDB [Peedee belemnite] values (−6.74‰), and low fluid inclusion salinities (0.3−7.0 wt%) with Th = 61.9−97.1 °C, suggesting that the fourth fluid flow pulse was affected by meteoric water to some extent. This can be interpreted to represent an open fluid system, which caused gas dispersion in the Niutitang Formation shales. Our findings provide important references for reconstructing the history of fluid flow in tectonically complex basins worldwide.

Superposed fracture networks

AbstractThe concept of superposed fracture networks consisting of different generations, and often types, of fractures that have developed sequentially is discussed. Superposed networks can consist of different types of extension or shear fractures, and each fracture may abut, cross or follow (reactivate) earlier fractures. An example of a superposed fracture network in Liassic limestones in Somerset, UK, is presented, which comprises two sets of veins and a later joint network. The veins develop as damage zones around faults, with veins of the later set crossing or trailing along the earlier set. The later joints either cross-cut the earlier veins or reactivate them, the latter being common for the thicker (more than about 5 mm) veins. The veins and joint networks have markedly different geometries and topologies. The veins are spatially clustered and are typically dominated by I-nodes, while the joints are more evenly distributed and tend to be dominated by Y-nodes. The combined network of veins and joints at Lilstock is dominated by X-nodes because so many joints cross-cut the earlier veins. Understanding the development of superposed fracture networks leads to better understanding of the kinematic, mechanical, tectonic and fluid flow history of rocks.

The ASPECT Hydrocephalus System: a non-hierarchical descriptive system for clinical use

In patients with hydrocephalus, prognosis and intervention are based on multiple factors. This includes, but is not limited to, time of onset, patient age, treatment history, and obstruction of cerebrospinal fluid flow. Consequently, several distinct hydrocephalus classification systems exist. The International Classification of Diseases (ICD) is universally applied, but in ICD-10 and the upcoming ICD-11, hydrocephalus diagnoses incorporate only a few factors, and the hydrocephalus diagnoses of the ICD systems are based on different clinical measures. As a consequence, multiple diagnoses can be applied to individual cases. Therefore, similar patients may be described with different diagnoses, while clinically different patients may be diagnosed identically. This causes unnecessary dispersion in hydrocephalus diagnostics, rendering the ICD classification of little use for research and clinical decision-making. This paper critically reviews the ICD systems for scientific and functional limitations in the classification of hydrocephalus and presents a new descriptive system. We propose describing hydrocephalus by a system consisting of six clinical key factors of hydrocephalus: A (anatomy); S (symptomatology); P (previous interventions); E (etiology); C (complications); T (time–onset and current age). The “ASPECT Hydrocephalus System” is a systematic, nuanced, and applicable description of patients with hydrocephalus, with a potential to resolve the major issues of previous classifications, thus providing new opportunities for standardized treatment and research.

Temperature and basinal fluid controls on feldspar diagenesis, Lower Cretaceous sandstones, Scotian Basin, Canada

The passive-margin Scotian Basin accumulated thick Upper Jurassic–Lower Cretaceous deltaic sandstones and shales, which were influenced by high heat flow in the mid-Cretaceous and deformed by salt tectonics. This study takes advantage of the complex thermal history and record of saline fluid flow in the basin to determine the relative importance of burial depth, temperature, salinity of basinal brines, overpressure, and sandstone permeability in controlling the dissolution of detrital feldspar and growth of authigenic K-feldspar and albite. Feldspar grains and volcanic lithic clasts from two transects, with differing thermal and salt tectonic histories, were studied by scanning electron microscope (SEM) backscattered electron images, energy-dispersive spectroscopy, SEM cathodoluminescence (CL) imaging, and hot-cathode CL microscopy. Published fluid inclusion measurements are integrated with burial history curves and timing of deformation on salt detachment surfaces to provides a new synthesis of the post-Jurassic thermal and saline fluid flow history of the basin. Surface-controlled dissolution of K-feldspar and growth of authigenic K-feldspar rims occur from 1.5 to 3.1 km. More destructive transport-controlled dissolution, down to 3.9 km, is more effective in thick-bedded permeable sandstones that acted as fluid pathways. Albitization of detrital K-feldspar and sodic plagioclase, and of feldspars in volcanic lithic clasts was facilitated by high Na+ content of formation waters migrating preferentially through such pathways at the time of silica and carbonate cementation, with strong albitization coinciding with transport-controlled dissolution of K-feldspar. Authigenic albite partially fills pores created by K-feldspar dissolution. Overpressured conditions enhance albite authigenesis, as a result of slower fluid advection. Episodic release of hot, saline, overpressured fluids in the zone of surface-controlled dissolution of K-feldspar favoured albitization but had no detectable effect on K-feldspar dissolution. Basin hydrology plays a definitive role in feldspar diagenesis, producing patterns that cannot be interpreted as a simple consequence of temperature and activity of Na+.

Multiple fluid flow events from salt‐related rifting to basin inversion (Upper Pedraforca thrust sheet, SE Pyrenees)

AbstractFluid systems in inverted rifted margins are challenging to interpret because fractures formed before compression were often reactivated acting as fluid pathways as new ones formed. Deciphering the fracture and fluid flow history in such complex settings has key implications for the prediction of the distribution of mineral resources. As an example, we reconstruct the fluid flow evolution of a portion of the inverted Pyrenean rift, the Upper Pedraforca thrust sheet, from the Mesozoic extension to the Alpine orogeny. We combine structural analysis and petrographic, geochemical and geochronological data obtained from 87 samples of fracture‐filling carbonate cements. During the Late Jurassic‐Early Cretaceous, low‐temperature seawater produced dolomitization of Jurassic and Lower Cretaceous limestones in an extensional setting. During the Early Cretaceous salt‐related extension, formation waters, probably evolved seawater or fluids that interacted with Triassic evaporites, at temperatures from 125 to 149°C migrated through fractures. The formation of breccias within post‐salt rocks in primary weld zones facilitated the upward migration of formation waters that interacted with pre‐salt rocks with high 87Sr/86Sr ratios. Formation waters at temperatures of 80°C migrated during the emplacement of the Upper Pedraforca thrust sheet in the Late Cretaceous‐Palaeocene. These fluids interacted with Upper Cretaceous Carbonates and/or Triassic evaporites. In contrast, the influence of meteoric fluids increased in shallower positions due to the exhumation of the SE Pyrenees during the Eocene‐Oligocene. Coevally, hot dolomitizing fluids migrated along diapir walls during the formation of secondary welds. Supergene ores documented in diapiric areas worldwide related to meteoric fluids, and the similar meteoric percolation occurred in the Upper Pedraforca thrust sheet, suggest that supergene mineralization could be found in the Pyrenees. Brecciation of rocks in primary weld zones and evaporite detachments, where mineralization accumulate in fractures from basement‐derived fluids, also suggests that similar ores could be found in the Pyrenees.

Rhabdophane Th-Pb ages indicate reactivation of Mesoarchean structures in west Pilbara Craton during breakup of Greater India and Australia-Antarctica

Abstract Uranium-Th-Pb dating of phosphate minerals in very low-grade metasedimentary rocks from the Archean Pilbara Craton, Western Australia, has revealed a long history of deformation and fluid flow during the Paleoproterozoic. However, this technique has not detected evidence for fluid flow along craton margins during Phanerozoic rifting and breakup. We report the use of in situ Th-Pb geochronology of rhabdophane, a hydrous light rare earth element phosphate, to date fluid flow in shale from the 2.76 Ga Mount Roe Basalt from drill hole number 6 of the Archean Biosphere Drilling Program (ABDP6), northwestern Pilbara Craton. Thorium-Pb dating of rhabdophane in carbonaceous shale yields three main populations with weighted mean 208Pb/232Th ages of 152 ± 6 Ma, 132 ± 4 Ma, and 119 ± 4 Ma, which indicates phosphate growth up to 2.64 b.y. after deposition. The rhabdophane ages are coeval with three major breakup events in eastern Gondwana: separation of Southwest Borneo and Argoland from Australia (ca. 156–152 Ma), breakup of Greater India from Australia (ca. 140–135 Ma), and separation of Greater India/India from Antarctica (ca. 123 Ma). The proximity of drill hole ABDP6 to major Mesoarchean faults and shear zones on the craton margin, which are parallel to rift propagation and basin development, points to episodic reactivation of ancient crustal structures >2.8 b.y. after their formation. Our results also highlight the potential of rhabdophane as a U-Th-Pb geochronometer for dating low-temperature (<200 °C) fluid flow and hydrous alteration. The migration of Mesozoic fluids through Archean shales adds weight to questions about the origin of geochemical signals in ancient altered rocks and how to extract information about the early environment and biosphere.

Evolution of Sedimentary Basins as Recorded in Silica Concretions: An Example from the Ionian Zone, Western Greece

Chert concretions in thick limestone successions preserve a more complete paragenetic sequence of diagenetic minerals than their host limestone and interbedded shale. The goal of this study was to test the possible presence of a high-temperature mineralising system in the Ionian basin of western Greece. Upper Cretaceous chert nodules were sampled at Araxos, where rocks are highly faulted and uplifted by salt diapirism, and on Kastos Island, on the flanks of a regional anticline. Chert concretions have microporosity produced by recrystallisation of opal to quartz and fractures produced in the brittle chert during basin inversion. Diagenetic mineral textures were interpreted from backscattered electron images, and minerals were identified from their chemistry. Diagenetic minerals in pores and veins include sedimentary apatite (francolite), dolomite, Fe-chlorite, Fe oxide-hydroxide mixtures, sphalerite, barite and calcite. Sphalerite is restricted to Araxos, suggesting that inferred basinal fluids were hotter and more saline than at Kastos. At Araxos, the Fe oxide-hydroxide also includes minor Cu, Zn, and Ni. Whether the transported metals were derived from sub-salt clastic rocks and basement, or from enriched Mesozoic black shales, is unclear. The effectiveness of this novel approach to understanding fluid flow history in thick limestone successions is validated.

A Thermal Pulse Induced by a Permian Mantle Plume in the Tarim Basin, Northwest China: Constraints From Clumped Isotope Thermometry and In Situ Calcite U‐Pb Dating

AbstractHigh burial temperature and a lack of material for traditional thermal proxies significantly impede the understanding of the thermal history of carbonate stratigraphic sequences in deep time. Carbonate clumped isotope thermometry interpreted through models of solid‐state isotopic reordering and in situ U‐Pb dating provides a new methodology for reconstructing thermal histories of such successions. Calcite fabrics (micrite cements and veins) from deeply buried (5,000–8,000 m) Ordovician carbonate intervals in the Tarim Basin were analyzed for their carbonate clumped isotope compositions and U‐Pb ages, and the results were used to estimate maximum peak burial temperatures. Reconstructed burial temperatures reveal a previously ignored thermal pulse in the range of 160°C–190°C during the Permian period. Maximum geothermal gradients at the time of peak burial temperature varied from 26.8°C/km to 69.3°C/km, with higher values in the northern Tarim Basin. We show that the spatial patterns of peak burial temperature and geothermal gradients closely correspond to the distribution of the Tarim Large Igneous Province, which emplaced during the Permian following the emplacement of a mantle plume beneath the Tarim Basin. We thus propose that the thermal pulse recorded in Tarim Ordovician limestones resulted from Permian mantle plume activity. The reconstructed thermal history has important implications for our understanding of source‐rock hydrocarbon generating history, hydrocarbon accumulation, and fluid flow history in the Tarim Basin. This study also demonstrates the potential of the integration of Δ47, U‐Pb dating of carbonates and solid‐state reordering models as an integrated thermochronological method for reconstructing thermal histories of deeply buried carbonate intervals.

Long-lived deformation history recorded along the Precambrian Thelon and Judge Sissons faults, northeastern Thelon Basin, Nunavut

The east–northeast-striking Thelon and Judge Sissons faults of south-central Nunavut are well preserved and record long-lived dextral transcurrent movement with complex reactivation and fluid flow histories. The faults cut across Archean gneisses, Paleoproterozoic plutons, and a Mesoproterozoic sedimentary basin in the Rae domain of the western Churchill Province. They formed and were reactivated during multiple deformation events beginning with an initial faulting event at 1830–1760 Ma, followed by an epithermal faulting event at 1760–1750 Ma and late reactivation events at 1600–1300 Ma. The initial faulting event produced the core-damage zone architecture of the faults. Damage zones are characterized by multiple fracture sets, quartz veins and hydrothermal crackle breccias, surrounding core zones defined by multiple mosaic to chaotic breccias and cataclasites with dextral slip indicators. The epithermal faulting event is expressed by the presence of crosscutting comb, crustiform-cockade and lattice-bladed quartz ± hematite ± carbonate veins, and is likely associated with a magmatic event of similar age. The late reactivation events resulted in the formation of irregular, non-cohesive crackle to mosaic breccias and gouges, which became the primary pathways for uranium-bearing hydrothermal fluids and the formation of unconformity-type uranium deposits. The Thelon and Judge Sissons faults are similar to other major continental faults in the Rae domain (e.g., McDonald fault, Wager Bay shear zone), which formed during the Paleoproterozoic Taltson–Thelon and Trans-Hudson orogenies and to modern analogues, such as the Karakorum, Altyn Tagh, and Hunan–Jiangxi faults, which formed during the Himalayan–Tibetan orogeny and experienced prolonged hydrothermal and even hot spring activity.

Multi-stage alteration, rheological switches and high-grade gold mineralization at Sheba Mine, Barberton Greenstone Belt, South Africa

Structural, petrographic and geochemical data from Sheba Gold Mine in the Barberton Greenstone Belt of South Africa indicate that gold mineralization formed at the end, and as the result of a multi-stage structural, fluid flow and alteration history. This multi-stage evolution is a prerequisite for the formation of high-grade (>40 g/t Au) ore bodies. The Sheba Mine is situated in well-bedded metaturbidites of the Mesoarchaean Fig Tree Group and structurally infolded ultramafic lavas in the first-order, refolded Ulundi syncline in the northern parts of the belt. Original komatiitic lava flows are pervasively altered to talc-carbonate greyschist. This regionally widespread alteration relates to an early phase of deformation and associated fluid flow. The reaction softening associated with this alteration accentuates rheological anisotropies within the heterogeneous wall-rock sequence. This results in the localization of strain along the contact between talc-carbonate greyschist and overlying, massive greywacke and chert units during later-stage refolding and associated flexural slip. Pervasive quartz veining, silicification, K-enrichment and the progressive replacement of the earlier talc-carbonate assemblages by a high-variance quartz-fuchsite green schist alteration testify to the localized fluid flow along this contact. The newly formed, finely intergrown green schist assemblage leads, in turn, to a reaction hardening and embrittlement of the former greyschist-chert contact. High-grade gold mineralization is hosted by brittle quartz-carbonate vein networks and breccias developed along brittle-ductile structures that cross-cut the competent green schist at high angles. The siting of gold and predominance of free gold suggest that gold precipitation is related to extreme fluid pressure cycling and phase separation of the mineralizing fluid during the formation of the brittle fracture networks. The thrust kinematics of the late-stage controlling structure studied here indicate that the mineralized structure accommodated regional NW-SE subhorizontal shortening when further tightening of the Ulundi syncline passed the lock-up stage could no longer be accommodated by flexural slip. The results highlight that the formation of favourable conditions for high grade mineralization, such as those at Sheba Mine, may be the result of the interaction of temporally distinct fluid flow and alteration events and lithological heterogeneities during the progressive structural evolution of a region.

Near-surface Palaeocene fluid flow, mineralisation and faulting at Flamborough Head, UK: new field observations and U–Pb calcite dating constraints

Abstract. We present new field observations from Selwicks Bay, NE England, an exposure of the Flamborough Head Fault Zone (FHFZ). We combine these with U–Pb geochronology of syn- to post-tectonic calcite mineralisation to provide absolute constraints on the timing of deformation. The extensional frontal fault zone, located within the FHFZ, was active at ca. 63 Ma, with protracted fluid activity occurring as late as ca. 55 Ma. Other dated tensile fractures overlap this time frame and also cross-cut earlier formed fold structures, providing a lower bracket for the timing of folding and compressional deformation. The frontal fault zone acted as a conduit for voluminous fluid flow, linking deeper sedimentary units to the shallow subsurface, potentially hosting open voids at depth for a significant period of time, and exhibiting a protracted history of fracturing and fluid flow over several million years. Such fault-hosted fluid pathways are important considerations in understanding chalk reservoirs and utilisation of the subsurface for exploration, extraction and storage of raw and waste materials. Most structures at Selwicks Bay may have formed in a deformation history that is simpler than previously interpreted, with a protracted phase of extensional and strike-slip motion along the FHFZ. The timing of this deformation overlaps that of the nearby Cleveland Dyke intrusion and of regional uplift in NW Britain, opening the possibility that extensional deformation and hydrothermal mineralisation at Selwicks Bay are linked to these regional and far-field processes during the Palaeocene.

Fluid Dynamics in a Thrust Fault Inferred from Petrology and Geochemistry of Calcite Veins: An Example from the Southern Pyrenees

Petrographic and geochemical analyses (δ18O, δ13C, 87Sr/86Sr, clumped isotopes, and elemental composition) coupled with field structural data of synkinematic calcite veins, fault rocks, and host rocks are used to reconstruct the episodic evolution of an outstanding exposed thrust zone in the Southern Pyrenees and to evaluate the fault behavior as a conduit or barrier to fluid migration. The selected thrust displaces the steeply dipping southern limb of the Sant Corneli-Bóixols anticline, juxtaposing a Cenomanian-Turonian carbonate unit against a Coniacian carbonate sequence. Successive deformation events are recorded by distinct fracture systems and related calcite veins, highlighting (i) an episodic evolution of the thrust zone, resulting from an upward migration of the fault tip (process zone development) before growth of the fault (thrust slip plane propagation), and (ii) compartmentalization of the thrust fault zone, leading to different structural and fluid flow histories in the footwall and hanging wall. Fractures within the footwall comprise three systematically oriented fracture sets (F1, F2, and F3), each sealed by a separate generation calcite cement, and a randomly oriented fracture system (mosaic to chaotic breccia), cemented by the same cements as fracture sets F1 and F2. The formation of fractures F1 and F2 and the mosaic to chaotic breccia is consistent with dilatant fracturing within the process zone (around the fault tip) during initial fault growth, whereas the formation of the latest fracture system points to hybrid shear-dilational failure during propagation of the fault. The continuous formation of different fracture systems and related calcite cementation phases evidences that the structural permeability in the footwall was transient and that the fluid pathways and regime evolved due to successive events of fracture opening and calcite cementation. Clumped isotopes evidence a progressive increase in precipitation temperatures from around 50°C to 117°C approximately, interpreted as burial increase linked to thrust sheet emplacement. During this period, the source of fluid changed from meteoric fluids to evolved meteoric fluids due to the water-rock interaction at increasing depths and temperatures. Contrary to the footwall, within the hanging wall, only randomly oriented fractures are recognized and the resulting crackle proto-breccia is sealed by a later and different calcite cement, which is also observed in the main fault plane and in the fault core. This cement precipitated from formation fluids, at around 95°C, that circulated along the fault core and in the hanging wall block, again supporting the interpretation of compartmentalization of the thrust structure. The integration of these data reveals that the studied thrust fault acted as a transverse barrier, dividing the thrust zone into two separate fluid compartments, and a longitudinal drain for migration of fluids. This study also highlights the similarity in deformation processes and mechanisms linked to the evolution of fault zones in compressional and extensional regimes involving carbonate rocks.

Using 87Sr/86Sr LA-MC-ICP-MS Transects within Modern and Ancient Calcite Crystals to Determine Fluid Flow Events in Deep Granite Fractures

The strontium isotope signature (87Sr/86Sr) of calcite precipitated in rock fractures and faults is a frequently used tool to trace paleofluid flow. However, bedrock fracture networks, such as in Precambrian cratons, have often undergone multiple fracture reactivations resulting in complex sequences of fracture mineral infillings. This includes numerous discrete calcite crystal overgrowths. Conventional 87Sr/86Sr analysis of dissolved bulk samples of such crystals is not feasible as they will result in mixed signatures of several growth zonations. In addition, the zonations are too fine-grained for sub-sampling using micro-drilling. Here, we apply high spatial resolution 87Sr/86Sr spot analysis (80 µm) in transects through zoned calcite crystals in deep Paleoproterozoic granitoid fractures using laser ablation multi-collector inductively coupled plasma mass spectrometry (LA-MC-ICP-MS) to trace discrete signs of paleofluid flow events. We compare the outermost calcite growth zone with 87Sr/86Sr values of the present-day groundwater sampled in the same boreholes to distinguish potential modern precipitates. We then connect our results to previously reported radiometric dating and C and O isotope signatures to understand the temporal history and physicochemical evolution of fluid flow within the fractures. Comparisons of modern calcite precipitated in a borehole over a period of 17 years with modern waters prove the concept of using 87Sr/86Sr as a marker for fluid origin in this environment and for how 87Sr/86Sr changed during marine water infiltration. Intermittent calcite precipitation over very long time spans is indicated in calcite of the currently open fractures, showing an evolution of 87Sr/86Sr from ~0.705–0.707—a population dated to ~1.43 billion years—to crystal overgrowth values at ~0.715–0.717 that overlap with the present-day groundwater values. This shows that high spatial resolution Sr isotope analysis of fine-scaled growth zonation within single calcite crystals is applicable for tracing episodic fluid flow in fracture networks.

Syncing fault rock clocks: Direct comparison of U-Pb carbonate and K-Ar illite fault dating methods

Abstract The timing of slip on brittle faults in Earth’s upper crust is difficult to constrain, and direct radiometric dating of fault-generated materials is the most explicit approach. Here we make a direct comparison between K-Ar dating of fault gouge clay (authigenic illite) and U-Pb dating of carbonate slickenfibers and veins from the same fault. We have dated fault generated materials from the Big Creek fault, a northwest-striking, dextral strike-slip fault system in Yukon Territory, Canadian Cordillera. Both methods yielded dates at ca. 73 Ma and ca. 60–57 Ma, representing at least two periods of fault slip that form part of a complex fault and fluid-flow history. The Cretaceous result lies within previous indirect estimates for major slip on the fault. The Paleocene–Eocene result coincides with the estimated timing of slip of the nearby Tintina and Denali faults, which are crustal-scale, northwest-striking dextral faults, indicating Big Creek fault reactivation during regional faulting. The coincidence of periods of carbonate-crystallizing fracturing and fluid flow with intervals of seismic, gouge-generating slip supports the fault valve model, where fault strength is mediated by fluid pressures, and fluid emplacement requires seismic pumping in otherwise impermeable aseismic fault zones. The reproducibility of slip periods for distinct fault-generated materials using different decay systems indicates that these methods provide complimentary results and can be reliably applied to date brittle fault slip, opening new opportunities for investigating fault conditions with associated mineralizing fluid events.

LA-ICP-MS U-Pb geochronology and clumped isotope constraints on the formation and evolution of an ancient dolomite reservoir: The Middle Permian of northwest Sichuan Basin (SW China)

Recent advances in laser-ablation inductively coupled-plasma mass spectrometry (LA-ICP-MS) in-situ U-Pb radiometric dating and clumped isotope thermometry (Δ47) of carbonate minerals provide potential for refining the fluid flow and diagenetic history of carbonate successions. In this study, the Middle Permian dolomites proximal to the Longmenshan fold and thrust belt in northwest Sichuan Basin, southwest China, were investigated using combined U-Pb geochronology, clumped isotope thermometry, and routine isotopic (δ13C, δ18O and 87Sr/86Sr) and elemental geochemistry, in an attempt to reveal the possible relevance of carbonate diagenesis and porosity evolution to the basin-scale tectonic/fluid flow events in the framework of absolute time. Overall, formation and evolution of these dolomites temporally correlated well with major tectonic episodes of the Longmenshan fold and thrust belt. Contrary to the previously-assumed volcanic-related model, U-Pb dating and Δ47 analyses suggest a mid- to late-Triassic replacive dolomitization event (U-Pb ages of 240 ± 12 Ma to 233.8 ± 6.4 Ma) by a hot (Δ47 temperatures 88– 104 °C) basinal brine, which was likely driven by thrust-related compression of the Longmenshan fold and thrust belt during the Triassic. Replacive dolomitization was immediately followed by cementation of euhedral dolomites (U-Pb age of 228 ± 10 Ma) and blocky calcites (U-Pb ages of 224.8 ± 1.8 Ma to 213.4 ± 3.3 Ma) precipitated from the basinal brine in the same tectonic regime. Afterwards, there was long-term cessation of diagenesis that was coincident with, and thus may well be attributed to, tectono-thermal quiescence during most of the Mesozoic Era and Paleogene. Finally, saddle dolomite cements yield Miocene ages (U-Pb ages of 16.40 ± 0.74 Ma to 12.3 ± 1.2 Ma) and precipitated in pre-existing vugs, representing a hydrothermal fluid flow event (Δ47 temperatures up to 170 °C) during the reactivation of thrusting. In addition, similarities in U-Pb ages and geochemical signatures between host rocks (replacive dolomites) and the vug-lining dolomite cements suggest that most porosity in these dolomite reservoirs was inherited from the precursor limestones, which probably experienced meteoric leaching during late Permian uplift. This study highlights that there are geodynamic controls on fluid flow and consequent diagenetic evolution of carbonates in tectonically active sedimentary basins. It illustrates that burial alone in this setting is not a sufficient driver for diagenetic alteration and porosity reduction. The combination of U-Pb radiometric dating, clumped isotope thermometry and routine geochemical analyses is a useful approach in refining the diagenetic and porosity evolution history of ancient carbonate successions.

U-Pb dating of overpressure veins in late Archean shales reveals six episodes of Paleoproterozoic deformation and fluid flow in the Pilbara craton

Abstract Fluid flow in the upper crust not only impacts the redistribution of heat and elements, driving the formation of economic ore deposits, but it also exerts control on metamorphism, metasomatism, and deformation. However, reconstructing the history of fluid flow in ancient basins is exceedingly difficult, particularly in Archean sedimentary rocks because of extensive overprinting and recrystallization. Here, we report U-Pb ages for monazite and xenotime that grew in bedding-parallel veins in 2.63–2.5-b.y.-old shales along the southern Pilbara craton, Australia. The U-Pb ages define six discrete populations, at 2.41 Ga, 2.30 Ga, 2.20 Ga, 2.10 Ga, 2.05 Ga, and 1.66 Ga, which formed ≥200 m.y. after deposition. The abundance of bedding-parallel crack-seal and fibrous veins in banded iron formations (BIFs) and underlying shales suggests a history of episodic buildup of fluid pressure followed by microfracturing, fluid expulsion, and mineral growth. Thermometry of vein minerals indicates temperatures between 230 °C and 320 °C, implicating the migration of hydrothermal fluids. The development of bedding-parallel veins at 2.41 Ga, 2.20 Ga, and 1.66 Ga was coeval with regional orogenic events known to have affected the craton, whereas vein growth at 2.30 Ga, 2.10 Ga, and 2.05 Ga reveals new episodes of deformation and fluid flow. Our results show that well-preserved Archean shales devoid of structural fabrics and >150 km inboard of the craton margin preserve a cryptic history of fluid overpressure, crack-seal vein development, and hydrothermal fluid flow between 2.41 and 1.66 b.y. ago.