Fixation Of Femoral Neck Fractures Research Articles

Outcomes of three cannulated screws in a modified triangular transverse configuration for fixation of intra-capsular femoral neck fractures.

Intra-capsular femoral neck fractures (FNF) are commonly encountered in trauma settings and are associated with high rates of morbidity and mortality. One of the most used methods of FNF treatment is the use of multiple cannulated screws. Many different screw constructs are reported in the literature, with no evidence of superiority of one construct over others. We present a series of patients treated by one senior surgeon with three cannulated screws positioned in a specific configuration. We conducted a retrospective monocentric analysis. All charts of patients hospitalized between January 2004 and June 2022 for an intra-capsular femoral neck fracture treated by three cannulated screws by the same senior surgeon were retrieved and analyzed. The clinical and radiological evaluations were performed by two independent researchers. Functional status of patients was assessed using the modified Harris Hip score (mHHS). Complications such as secondary displacement, non-union, avascular necrosis (AVN) and femoral neck shortening were all recorded. A total of 38 patients met the inclusion criteria. There were 17 males and 21 females with an average age of 66.3 ± 13.6years and a follow-up period of 16 ± 20months. Bone union was observed in 34 (89.5%) patients. Mild shortening was observed in two patients (5.2%) with no functional limitation. Four patients (10.5%) underwent reoperations, three due to another fall and one due to AVN four years post-fracture fixation. In our series, we demonstrate that the use of three cannulated screws in a triangular transverse configuration for fixation of intra-capsular femoral neck fractures provides excellent results with low rates of femoral neck shortening, AVN or non-union.

Total hip arthroplasty for failed internal fixation of femoral neck fracture: a retrospective study with 2–14 years’ follow-up of 345 patients

ObjectivesThe purpose of this study was to analyze mid- to long-term outcomes of total hip arthroplasty (THA) following failed internal fixation of femoral neck fracture.MethodsThis study retrospectively analyzed 345 patients with femoral neck fracture who underwent THA after failure of internal fixation at our hospital between January, 2003 and December, 2019. Patients older than 55 years (n = 175) and patients no older than 55 years (n = 170) were compared in terms of complications and survival rates during follow-up, which lasted a mean of 6 years.ResultsThe two age groups showed similarly low incidence of complications and similarly long periods of survival without revision surgery. Only three younger patients and two older patients underwent revision surgery during follow-up. The two groups showed similarly high survival rates at the end of follow-up (> 93%). Younger patients showed significantly bettter Harris hip score at last follow-up (90.2 vs. 88.1 points, p < 0.001) without clinically significant difference, but they required THA significantly earlier after internal fixation (4.4 vs. 6.8 years, p < 0.001).ConclusionsTHA after failed internal fixation of femoral neck fracture is a well tolerated and effective procedure in older and younger patients.

Mechanical study of the application of compression screw nails in the cross-inverted triangular pattern for internal fixation of femoral neck fractures

ObjectiveTo design a cross-inverted triangular pattern to insert compression screw nails for the treatment of femoral neck fractures and to compare the biomechanics of inserting compression screw nails in cross-inverted triangular patterns and inverted triangular patterns.MethodsThe reasonableness of the model is first analyzed using finite elements. A total of 6 adult human specimens were selected, of which 3 males and 3 females were divided into the A1, B1, and C1 groups and the A2, B2, and C2 groups by the random number table method. The A1 and A2 groups were made into subhead femoral neck fracture models, the B1 and B2 groups were made into trans-neck femoral neck fracture models, and the C1 and C2 groups were made into basal femoral neck fracture models. The right femur of each group had a compression screw nail inserted in the crossed-inverted triangular pattern, and the left femur of each group had a compression screw nail inserted in the inverted triangular pattern. The static compression test was performed by an electronic universal testing machine. The maximum load of the femoral neck and the load of 3.00 mm axial displacement of the femoral head were read according to the pressure-displacement curve drawn in the experiment.ResultsThe finite element analysis showed that the cross-inverted triangular hollow threaded nail has better conductivity and more stable fixation than the inverted triangular hollow threaded nail. The maximum load of the femoral neck and the load of 3.00 mm axial displacement of the femoral head of the left femur were greater than those of the right femur in the A1, A2, B1, B2 and C2 groups, while the maximum load of the femoral neck and the load of 3.00 mm axial displacement of the femoral head of the left femur were smaller than those of the right femur in the C1 group. There was no statistically significant difference in the maximum load of the femoral neck or the load of 3.00 mm axial displacement of the femoral head between the A1 and A2 groups, the B1 and B2 groups, or the C1 and C2 groups (P > 0.05). After the K-S test, the maximum load of the femoral neck and the load of 3.00 mm axial displacement of the femoral head were normally distributed (P = 0.20), and the LSD-t test was conducted for the two load data; the difference was not statistically significant (P = 0.235).ConclusionThe effect of compression screw nails in the cross-inverted triangular pattern was the same in males and females, and stability was better in the fixation of subhead and trans-neck femoral neck fractures. However, its stability in fixation of basal femoral neck fracture is worse than that of the inverted triangular pattern. The cross-inverted triangular hollow threaded nail has better conductivity and more stable fixation than the inverted triangular hollow threaded nail.

Comparing the volume of vascular intersection of two femoral neck fracture fixation implants using an In silico technique.

Three dimensional (3D) µCT angiograms of 9 cadaveric proximal femora were produced. Three segmented volumes-porous or cancellous bone, filled or cortical bone, and intraosseous vasculature-were converted to surface files. 3D in silico models of the fixation systems were sized and implanted in silico without visibility of the vascular maps. The volume of vasculature that overlapped with the devices was determined. The ratio of the vascular intersection to the comparator device was calculated, and the mean ratio was determined. A paired design, noninferiority test was used to compare the devices. Results indicate both significant (P < 0.001) superiority and noninferiority of the hip screw with an integrated antirotation screw when compared with a dynamic hip screw and antirotation screw for the volume of vasculature that overlapped with each device in the femoral neck. Combining established methods of vascular visualization with newer methods enables an implant's impact on vascular intersection to be assessed in silico. This methodology suggests that when used for femoral neck fracture management, the new device intersects fewer blood vessels than the comparator. Comparative clinical studies are needed to investigate whether these findings correlate with the incidence of avascular necrosis and clinical outcomes.

Incidence and factors influencing neck shortening after screw fixation of femoral neck fractures with the femoral neck system

ObjectiveTo investigate the effects of postoperative femoral neck shortening in patients with femoral neck fractures fixed with femoral neck system screws (FNS) and to explore the factors influencing femoral neck shortening.MethodTo retrospectively analyze the data of 113 patients with femoral neck fractures admitted to the Second Hospital of Fuzhou City, affiliated with Xiamen University, between December 2019 and January 2022. Of these, 87 patients were followed up for more than 12 months, 49 men and 38 women: 36 cases of Garden I and II fractures and 51 cases of Garden III and IV fractures, to record the patient's hip Harris score at 12 months postoperatively. Patients were divided into femoral neck shortening group and femoral neck no shortening group according to their regular postoperative follow-up radiographic measurements. To count the incidence of femoral neck shortening, a comparison of postoperative complication rates and hip Harris scores between the two groups was made. Statistical comparison of the two groups and a multifactorial logistic regression analysis were also performed to analyze the factors affecting femoral neck shortening.ResultsAll 87 patients were followed up for more than 12 months after surgery. In 34 of these cases, neck shortening occurred, and the incidence rate was 39.1%. 15 cases of severe shortening, incidence of 17.2%; fracture healing 84 cases, fracture healing rate of 96.5%. The hip Harris score was 83.99 (81.95, 89.20) in the neck shortening group at 12 months postoperatively, 90.87 (87.95, 94.80) for the group without neck shortening; the difference between the two groups was statistically significant (P < 0.01). 32 cases of fracture healing in the neck shortening group at 12 months after surgery, fracture healing rate of 94.1%; 52 cases healed without neck shortening group, fracture healing rate of 98.1%. The difference between the two groups was not statistically significant (P = 0.337). High incidence of neck shortening after FNS fixation of femoral neck fractures, cortical comminution of the severed end, fracture fractionation and quality of reduction were significantly correlated with neck shortening.ConclusionHigh incidence of postoperative neck shortening after internal fixation of femoral neck fractures with the femoral neck system, the cortical comminution, the type of fracture, and the quality of fracture reduction are the influencing factors; femoral neck shortening can affect postoperative hip function, but does not affect fracture healing.

Biomechanical Comparison between Inverted Triangle and Vertical Configurations of Three Kirschner Wires for Femoral Neck Fracture Fixation in Dogs: A Cadaveric Study.

The purpose of this study was to compare single-cycle axial load and stiffness between inverted triangle and vertical configurations of three Kirschner wires (K-wires) for femoral neck fracture fixation in small dog cadaveric models. In each of the eight cadavers, the basilar femoral neck fracture model was prepared on both sides of the femur. One side of the femur was stabilized with three 1.0 mm K-wires of an inverted triangle configuration (group T), and the other femur was stabilized with a vertical configuration (group V). Postoperatively, the placement of the K-wires was evaluated with radiographic and computed tomography (CT) images, and static vertical compressive loading tests were performed. The mean yield load and the lateral spread were significantly higher in group T compared to group V (p = 0.023 and <0.001). On the cross-section of femoral neck at the level of the fracture line, the surface area between K-wires was significantly larger (p < 0.001) and the mean number of cortical supports was significantly higher in group T (p = 0.007). In this experimental comparison, the inverted triangle configuration of three K-wires was more resistant to failure under axial loading than the vertical configuration for canine femoral neck fracture fixation.

The comparison of femoral neck system and cancellous screws internal fixation for femoral neck fracture

ABSTRACT Background The clinical efficacy of cancellous screws (CS) and femoral neck system (FNS) internal fixation in the treatment of femoral neck fracture (FNF) was compared in this research. Methods Ninety-six patients with FNF were enrolled in this study. There were 47 cases in FNS group and 49 cases in CS group. The data of operation time, intraoperative bleeding, bed days and complication were recorded. Patients’ joint function was evaluated by Harris score. At the last follow-up, the cost-effectiveness analysis of the two methods was analyzed according to the total cost of patients and hip function. Results The intraoperative blood loss of the patients in FNS group was significantly higher than that in the CS group, but the length of hospitalization was significantly lower. There was no significant difference in the incidence of complications between FNS and CS. The joint function of FNS group was significantly better than that of CS group at 3 months after operation. There was no significant difference in Harris score between the two groups at the last follow-up. The overall medical cost of FNS group in 1 year is high. Cost-effectiveness analysis showed that compared with CS group, FNS group needs to pay 5761.1 yuan more for each additional Harris score. Conclusion FNS and CS internal fixation can achieve satisfactory clinical results in the treatment of FNF. FNS treatment is helpful to the early functional recovery of patients, but the overall medical cost is high.

Assessing osteonecrosis of the femoral head after internal fixation of femoral neck fractures in young patients with fixation implants in situ: the value of MARS MRI in relation to conventional radiography and patient-reported outcomes

Little is known on the use of metal artifact reduction sequence (MARS) MRI to diagnose osteonecrosis of the femoral head (ONFH) after fixation of femoral neck fractures (FNF) with conventional metal implants present. We compared MARS MRI with radiography in diagnosing ONFH. Secondarily, we determined whether signs of ONFH on MARS MRI correlate with patient-reported outcomes (PROs) via Oxford Hip Score (OHS) and pain (VAS). 30 adults under 60 years treated with internal fixation after FNF were prospectively included (2015-2018) at 2 hospitals. They were followed up with radiography and PROs at 4, 12, and 24 months and MARS MRI at 4 and 12 months. OHS < 34 or VAS pain > 20 was considered significant. At 12 months, 14 patients had a pathological MRI. 3 of 14 had ONFH on radiographs at 12 months, increasing to 5 at 24 months, and 4 had unfavorable PROs. 2 of 5 patients with ONFH signs on both MRI and radiography had unfavorable PROs. 1 of 10 patients with normal MRI and radiography had unfavorable 2-year PROs. 4 patients had inconsistent MRI results, of which 1 developed ONFH. 1 patient dropped out. Information from a pathological MRI was not useful, as a majority remained free from symptoms and ONFH signs on radiographs. Furthermore, PROs did not correlate with imaging results. MARS MRI findings must be better understood before being taken into clinical practice. However, a normal MARS MRI seems to be a good prognostic finding.

Assessment of the local blood supply when femoral neck fracture occurs:advances in the anatomy research and its clinical application

The stability of internal fixation of femoral neck fractures can be obtained through surgical techniques, the configuration of screws and bone grafting, etc. However, the blood supply injury caused by fractures could not be completely reversed by the current medical management. Hence, the comprehensive evaluation of the residual blood supply of the femoral neck, to perioperatively avoid further iatrogenic injury, has become a hotspot. The anatomy of the extraosseous blood supply of the femoral neck has been widely reported, while its clinical application mostly involved the assessment of the medial circumflex femoral artery and retinacular arteries. However, further studies are needed to explore the prognosis of patients with these artery injuries, with different degrees, caused by femoral neck fractures. Direct observations of nutrient foramina in vivo are not possible with current clinical technologies, but it is possible to make reasonable preoperative planning to avoid subsequent femoral head necrosis based on the distribution features of nutrient foramina. The anatomy and clinical application studies of the intraosseous blood supply focused on the junction area of the femoral head and neck to probe the mechanism of femoral head necrosis. Thus, the intraosseous blood supply of other regions in the femoral neck remains to be further investigated. In addition, a blood supply evaluation system based on a three-level structure, extraosseous blood vessels, nutrient foramina, and intraosseous vascular network, could be explored to assist in the treatment of femoral neck fractures.

Comparison of curative effect between Tianji robot assisted screw placement and traditional cannulated screw internal fixation for femoral neck fracture

To investigate the clinical efficacy and advantages of Tianji orthopedic robot assisted cannulated screw internal fixation for femoral neck fracture. The clinical data of 41 patients with femoral neck fracture who underwent internal fixation with cannulated screws from January 2019 to January 2022 were retrospectively analyzed. According to different surgical methods, they were divided into Tianji robot group and traditional cannulated screw fixation group (traditional operation group). Among them, there were 18 patients in Tianji robot group including 8 males and 10 females with age of (56.00±4.22) years old, Garden typeⅠ (4 cases), type Ⅱ (11 cases), type Ⅲ (2 cases), and type Ⅳ (1 case). There were 23 patients in the traditional operation group, including 10 males and 13 females, aged (54.87±4.81) years old;there were 5 cases of Garden typeⅠ, 14 cases of type Ⅱ, 3 cases of type Ⅲ and 1 case of type Ⅳ. The operation time, intraoperative blood loss, fluoroscopy times, guide needle placement times, operation costs and other indicators were observed and compared between two groups. Harris score was used to evaluate hip joint function 12 months after operation. The wounds of all patients healed in Grade A without complications. There were significant differences between two groups in terms of operation time, times of intraoperative fluoroscopy, times of guide needle placement, amount of intraoperative bleeding, and operation cost (P<0.05). All 41 patients were followed up for at least 12 months. The fractures of both groups were healed. There was no infection, screw loosening, fracture displacement and femoral head necrosis in Tianji robot group during follow-up;Screw loosening occurred in 2 patients in the traditional operation group during follow-up. At 12 months after operation, Harris hip joint function score of Tianji robot group was higher than that of traditional operation group in daily activity, lameness, joint activity score and total score (P<0.05). Tianji robot assisted nail placement is a better method for the treatment of femoral neck fracture, which improves the surgical efficiency, is more accurate, has higher success rate of one-time nail placement, shorter operation time, less radiation, and has better hip joint function recovery after surgery.

Application of 3D printing percutaneous guide plate in closed reduction and cannulated screw internal fixation of femoral neck fracture

To investigate the application of 3D printing percutaneous surgical guide plate in closed reduction and cannulated screw internal fixation of femoral neck fracture. The clinical data of 12 patients with femoral neck fracture from March 2019 to March 2022 were retrospectively analyzed. Patients were divided into observation group and control group according to different operation plans, with 6 cases in each group. The observation group received percutaneous operation guide plate assisted closed reduction and hollow screw internal fixation, while the control group received closed reduction and hollow compression screw internal fixation. The operation time, intraoperative blood loss, fluoroscopy times, and Kirschner needle puncture times were compared between two groups. The location of screws were recordedon postoperative X-ray films, follow-up time, time of complete fracture healing, Harris score of hip joint and the incidence of complications were recorded on postoperative X-ray films. The operation time of observation group (32.17±6.18) min was shorter than that of control group (53.83±7.31) min (P<0.05). The amount of intraoperative bleeding in the observation group (18.33±2.94) ml was less than that in the control group (38.17±5.56) ml(P<0.05). The times of fluoroscopy in the observation group (7.50±1.05) were less than those in the control group (21.00±4.82) (P<0.05). The number of Kirschner needle punctures (8.00±0.63) in observation group was less than that in control group (32.67±3.08) (P<0.05). The follow-up time was(12.88±0.74) months in observation group and (12.83±0.72) months in control group, there was no significant difference between two groups (P>0.05). One year after operation, Harris score of hip joint in the observation group was(82.00±4.52) points, while that in the control group was(81.00±3.41) points, there was no significant difference between two groups(P>0.05). The time of complete fracture healing in the observation group was (7.50±1.05) months, while that in the control group was (7.67±1.21) months, there was no significant difference between two groups(P>0.05). The parallelism of the screws in the observation group was (0.50±0.11) ° and (0.76±0.15) °, which were lower than that in the control group (1.57±0.31) ° and (1.87±0.21) ° (P<0.05). The screw distribution area ratio (0.13±0.02) cm2 in the observation group was higher than that in the control group (0.08±0.01) cm2 (P<0.05). No complications such as necrosis of femoral head, nonunion of fracture, shortening of femoral neck and withdrawal of internal fixation occurred in both groups. The application of 3D printing percutaneous surgical guide plate improves the accuracy and safety of closed reduction and cannulated screw internal fixation for femoral neck fracture. It has the advantages of minimally invasive, reducing radiation exposure, fast and accurate, shortening the operation time and reducing intraoperative bleeding.

Reoperation Rate of Internal Fixation for Femoral Neck Fractures in the Elderly - A Retrospective Follow-Up Study in 116 Patients With an Exploration of Risk Factors.

Internal fixation of femoral neck fractures is a widely used procedure that is comparatively less invasive and faster than hip replacement. While head preserving internal fixation of these fractures are still preferred where feasible, a faster recovery and lower reoperation rates make arthroplasty increasingly more appealing, in spite of being a more invasive option. Our aim was to determine the reoperation rate after internal fixation at our institution and to explore relevant risk factors in a geriatric population. This monocentric follow-up study was conducted analyzing 116 patients aged 65 and older with femoral neck fractures who were surgically treated with either cancellous screws or dynamic hip screws between 2010 and 2017. We retrospectively collected longitudinal data from our patient database, supplemented by a telephone survey, with a follow-up period of at least 18months. Twenty reoperations, due to either a failure of fixation, avascular necrosis, or posttraumatic osteoarthritis, were identified in our cohort, which constituted a reoperation rate of 17.2% (20/116). Fracture displacement was significantly associated with the reoperation risk (HR 8, CI 3-20; P < .001). The reoperation rate was 52.2% in displaced fractures vs 8.9% in undisplaced fractures. No link was found between the reoperation rate and gender, age, BMI, ASA score, type of implant, quality of internal fixation, type of living accommodation, and pre-fracture mobility. Internal fixation has been found to be an effective option in elderly patients with undisplaced fractures regardless of their specific age, cognitive ability or physical condition. In displaced fractures the reoperation rate was found to be high, therefore a primary hip replacement should be recommended.

Comparative Study for Osteosynthesis of Femoral Neck Fractures: Cannulated Screws versus Femoral Neck System.

The purpose of this study is to compare the radiological results of fixation using the femoral neck system (FNS) and cannulated screw (CS) for treatment of femoral neck fractures. A retrospective study of patients with femoral neck fractures who underwent internal fixation and had follow-up of more than six months from 2010 to 2020 was conducted. A total of 87 patients were enrolled in the study. The FNS group included 20 patients and the CS group included 67 patients. Classification of fractures was performed according to Garden and Pauwels classification. Operation time, intraoperative blood loss, sliding distance of the implant, lateral soft tissue irritation caused by implants, and complications were evaluated. The mean operation time was 40.30 minutes in the FNS group and 46.84 minutes in the CS group. The mean intraoperative bleeding volume was 51.25 mL in the FNS group and 72.16 mL in the CS group. Bone union was achieved in 18 patients in the FNS group (90.0%) and in 61 patients in the CS group (91.0%). The mean sliding distance of the implant was 4.06 mm in the FNS group and 3.92 mm in the CS group. No patients in the FNS group and 12 patients in the CS group complained of soft tissue irritation. A shorter operative time, less intraoperative bleeding, and less irritation of soft tissue were observed in the FNS group. FNS could be an alternative to CS for fixation of femoral neck fractures.

Letter to the editor: What makes fixation of femoral neck fractures fail? A systematic review and meta-analysis of risk factors.

Letter to the editor: What makes fixation of femoral neck fractures fail? A systematic review and meta-analysis of risk factors.

Are We Really Doing Our Best in Treating Nondisplaced Femoral Neck Fractures?: Commentary on an article by Johan Lagergren, MD, et al.: "Conversion to Arthroplasty After Internal Fixation of Nondisplaced Femoral Neck Fractures. Results from a Swedish Register Cohort of 5,428 Individuals 60 Years of Age or Older".

Are We Really Doing Our Best in Treating Nondisplaced Femoral Neck Fractures?: Commentary on an article by Johan Lagergren, MD, et al.: "Conversion to Arthroplasty After Internal Fixation of Nondisplaced Femoral Neck Fractures. Results from a Swedish Register Cohort of 5,428 Individuals 60 Years of Age or Older".

Management for A Depressive Patient with Femoral Neck Fracture by Electroconvulsive Therapy during COVID-19 Pandemic: A Case Report and Literature Review

Electroconvulsive therapy (ECT) is an effective treatment for refractory major depressive disorder with suicidal ideation. The most common adverse medical events are transient retrograde amnesia, falls and pneumonia. Hip fractures, associated with high-energy trauma by convulsions, were occasionally reported in western countries, in the period before the COVID-19 pandemic. Strict COVID-19 regulations influenced the course and further investigation of the treatment of post-ECT complications. A 33-year-old man, previously diagnosed with major depressive disorder, had a history of nine successful sessions of ECT treatment for depression five years ago. He was hospitalized again for 12 sessions of ECT for recurrent depression. Unfortunately, an ECT-induced right hip-neck fracture was noted after the ninth session of ECT, in March 2021. After receiving close reduction and internal fixation of the right femoral neck fracture, with three screws, his original daily function was restored. His treatment was regularly followed up at the outpatient clinic for 20 months; he achieved partial remission with three combined antidepressants. This case of ECT-induced right hip-neck fracture informed psychiatric staff to be aware of this rare adverse complication and ensure its appropriate management, especially during the COVID-19 pandemic.

Biomechanical evaluation of two modified intramedullary fixation system for treating unstable femoral neck fractures: A finite element analysis.

Purpose: The existing implants for fixation of femoral neck fractures have poor biomechanical stability, so the failure rate is high. We designed two modified intramedullary implants for treating unstable femoral neck fractures (UFNFs). We tried to improve the biomechanical stability of fixation by shortening the moment and reducing stress concentration. Each modified intramedullary implant was compared with cannulated screws (CSs) through finite element analysis (FEA). Methods: Five different models were included: three cannulated screws (CSs, Model 1) in an inverted triangle configuration, the dynamic hip screw with an anti-rotation screw (DHS + AS, Model 2), the femoral neck system (FNS, Model 3), the modified intramedullary femoral neck system (IFNS, Model 4), and the modified intramedullary interlocking system (IIS, Model 5). Three-dimensional (3D) models of femur and implants were constructed by using 3D modelling software. Three load cases were simulated to assess the maximal displacement of models and fracture surface. The maximal stress at the bone and implants was also evaluated. Results: FEA data showed that Model 5 had the best performance in terms of maximum displacement while Model 1 had the worst performance for this index under axial load of 2100N. With respect to Maximum stress, Model 4 had the best performance while Model 2 had the worst performance under axial load. The general trends under bending and torsion load were consistent with that under axial load. Our data demonstrated that the two modified intramedullary implants exhibited the best biomechanical stability, followed by FNS and DHS + AS, and then three cannulated screws in axial, bending, and torsion load cases. Conclusion: The two modified intramedullary designs showed the best biomechanical performance among the five implants included in this study. Therefore, this might provide some new options for trauma surgeons to deal with unstable femoral neck fractures.

Risk factors for osteonecrosis of femoral head after femoral neck fracture fixation with femoral neck system

To explore the risk factors for osteonecrosis of the femoral head (ONFH) after treatment of femoral neck fractures with femoral neck system (FNS). Between January 2020 and February 2021, 179 patients (182 hips) with femoral neck fractures treated by FNS fixation were selected for retrospective analysis. There were 96 males and 83 females with an average age of 53.7 years (range, 20-59 years). There were 106 cases of low-energy-induced injury and 73 cases of high-energy-induced injury. The fractures were classified as type Ⅱ in 40 hips, type Ⅲ in 78 hips, and type Ⅳ in 64 hips according to Garden classification standard, and as typeⅠin 23 hips, type Ⅱ in 66 hips, and type Ⅲ in 93 hips according to Pauwels classification standard. There were 21 patients with diabetes. Patients were divided into ONFH group and non-ONFH group according to whether ONFH occurred at last follow-up. The data of the patients were collected, including age, gender, body mass index (BMI), trauma mechanism, bone mineral density, having diabetes or not, Garden classification and Pauwels classification of fractures, fracture reduction quality, femoral head retroversion angle, and removal of internal fixator or not. The above factors were analyzed by univariate analysis, and then multivariate logistic regression analysis was used to identify risk factors. Total 179 patients (182 hips) were followed up 20-34 months (mean, 26.5 months). Of these, 30 cases (30 hips) developed ONFH at 9-30 months after operation (ONFH group), and the incidence of ONFH was 16.48%. And 149 cases (152 hips) had no ONFH at last follow-up (non-ONFH group). The univariate analysis showed that there were significant differences between groups in bone mineral density, having diabetes or not, Garden classification, femoral head retroversion angle, and fracture reduction quality ( P<0.05). The multivariate logistic regression analysis showed that the Garden type Ⅳ fracture, reduction quality of grading Ⅲ, femoral head retroversion angle >15°, complicated with diabetes were the risk factors for ONFH after FNS fixation ( P<0.05). For the patients with Garden type Ⅳ fracture, poor quality of fracture reduction, femoral head retroversion angle >15°, and diabetes, the risk of ONFH after FNS fixation increases.

Conversion hip arthroplasty for failed internal fixation of ipsilateral femoral neck and shaft fractures: a case report

BackgroundIpsilateral femoral neck and hip fractures are uncommon high energy injuries. In the literature no single method of treatment has emerged as superior to the others. A recent publication has documented the successful application of the rendezvous technique using dual-implants for treating these injuries. However in some cases, this technique may fail and revision surgery is required.Case presentationA 67-year old man sustained ipsilateral fractures of his femur and femoral neck in a road traffic accident. His injuries were treated by a dual construct consisting of a retrograde femoral nail and dynamic hip screw. Three months after surgery the hip screw cut out of the femoral head necessitating revision to a total hip arthroplasty. Surgery was carried out using a single stage two part procedure on a standard operating table without having to reposition or redrape the patient. There were no postoperative complications and at 1 year from surgery the patient is satisfied with the result and has returned to work.ConclusionConversion hip arthroplasty in the presence of dual implants is a technically challenging and unpredictable procedure, with an increased risk of complications. Our surgical approach provides a framework for orthopedic surgeons to safely perform this complex procedure.

Novel screw fixation placement configuration for the treatment of Pauwels type III femoral neck fractures: a finite element analysis.

Verticality of transcervical hip fractures in young patients is usually connected with typically high-energy fractures which are known as Pauwels type III. Artificial femoral head replacement surgery is mostly not considered for treating femoral neck fractures in such patients. The commonly used devices for the fixation of vertical femoral neck fractures are multiple screws or a sliding hip screw with or without an antirotation screw. Size, location and length of the screws are the most effective parameters in terms of the structural performance of internal fixation implants, but the optimal configuration of the screws is necessary to be investigated to direct the clinical practice. The aim of this study is to compare the biomechanical stability of the standard inverted triangle configuration with the various newly proposed x-crossed screw configurations. FEA simulations carried out in this study demonstrated that using an x-crossed-right assembly in treating Pauwels type III femoral neck fractures satisfies the biomechanical stability in terms of maximum von Mises stresses and maximum femoral head displacement. However, in terms of maximum relative neck fracture displacement, the x-crossed-right assembly would not entirely suffice the desired biomechanical stability. Therefore, using an x-crossed screw assembly in treating femoral neck fractures would provide the needed biomechanical stability.