PurposeThere are three purposes in this paper: to verify the importance of bi-directional fluid-structure interaction algorithm for centrifugal impeller designs; to study the relationship between the flow inside the impeller and the vibration of the blade; study the influence of material properties on flow field and vibration of centrifugal blades.Design/methodology/approachFirst, a bi-directional fluid-structure coupling finite element numerical model of the supersonic semi-open centrifugal impeller is established based on the Workbench platform. Then, the calculation results of impeller polytropic efficiency and stage total pressure ratio are compared with the experimental results from the available literature. Finally, the flow field and vibrational characteristics of 17-4PH (PHB), aluminum alloy (AAL) and carbon fiber-reinforced plastic (CFP) blades are compared under different operating conditions.FindingsThe results show that the flow fields performance and blade vibration influence each other. The flow fields performance and vibration resistance of CFP blades are higher than those of 17-4PH (PHB) and aluminum alloy (AAL) blades. At the design speed, compared with the PHB blades and AAL blades, the CFP blades deformation is reduced by 34.5% and 9%, the stress is reduced by 69.6% and 20% and the impeller pressure ratio is increased by 0.8% and 0.14%, respectively.Originality/valueThe importance of fluid-structure interaction to the aerodynamic and structural design of centrifugal impeller is revealed, and the superiority over composite materials in the application of centrifugal impeller is verified.