Fine Structure Research Articles

Stellar Abundances at the Center of Early-type Galaxies with Fine Structure

Our understanding of early-type galaxies (ETGs) has grown in the past decade with the advance of full-spectrum fitting techniques used to infer the properties of the stellar populations that make up the galaxy. We present ages, central velocity dispersions, and abundance ratios relative to Fe of C, N, O, Mg, Si, Ca, Ti, Cr, Mn, Co, Ni, Cu, Sr, Ba, and Eu, derived using full-spectrum fitting techniques for three ETGs, NGC 2865, NGC 3818, and NGC 4915. Each of these three galaxies were selected because they have optical, disturbed structures (fine structure) that are linked to major merger events that occurred 1, 7, and 6 Gyr ago, respectively. Two of the ETGs, NGC 3818 and NGC 4915, show chemical signatures similar to ETGs without fine structure, which is consistent with a gas-poor merger of elliptical galaxies in which substantial star formation is not expected. For NGC 2865, we find a statistically higher abundance of Ca (an α element) and Cr and Mn (Fe-peak elements). We show that for NGC 2865, a simple gas-rich merger scenario fails to explain the larger abundance ratios compared to ETGs without fine structure. These three ETGs with fine structure exhibit a range of abundances, suggesting ETGs with fine structure can form via multiple pathways and types of galaxy mergers.

Spin-orbit torque-driven domain wall motion in the absence of Dzyaloshinskii-Moriya interactions

The fine structure and dynamics of magnetic domain walls in ultrathin films with perpendicular magnetization, in the presence of a secondary anisotropy, is analysed owing to micromagnetics. Two cases are considered, a cubic anisotropy typical for (111) oriented garnet epitaxial films, and an orthorhombic anisotropy as found in, e.g., Co/W(110) films. The statics is solved first, showing that, in general, domain walls are not of the pure Bloch type. The dynamics under the spin Hall effect induced by a current flowing in an adjacent layer is then monitored. Finite and non-negligible domain wall velocities are predicted in both cases, in the absence of Dzyaloshinskii-Moriya interactions, with distinct behaviours regarding the current density and its orientation with respect to the secondary anisotropy axes. The relevance of these results to recent reports of current-driven domain wall dynamics in insulating ultrathin garnet films, capped with platinum, is discussed.

Understanding the multiplet fine structures of MgO: Cr3+ with combination method of first−principles calculations and ligand field theory

The interpretative and predictive capabilities on the energy fine structures of transition metal ions in solids are explored by integrating the first -principles calculations with ligand-field (LF) theory. The charge-compensated site of MgO: Cr3+ is chosen as a case and the aim is to determine the energy-level fine structure and EPR g factor g// and g⊥. The approach involves initially computing all the required parameters for LF theory through first-principles calculations, and these parameters are subsequently fed into the LF model Hamiltonian, which fully incorporates interactions between different spectrum terms through the LF operator, spin-orbit coupling (SOC) operator and other relevant factors. The calculated zero-field splitting parameter D and g factors of the ground term A24(t23) are reasonably good agreement with the experimental observations. However, the energy levels of excited states are slightly underestimated compared to experimental values due to the underestimation of Racah parameters in the first-principles calculations, except the T24[t22(T13)e] term which is insensitive to Racah parameters for it is equal to 10Dq relative to ground term A24(t23) with possible minor corrections due to perturbations.

Ocean circulation contributes to genetic connectivity of limpet populations at deep-sea hydrothermal vents in a back-arc basin.

For endemic benthos inhabiting hydrothermal vent fields, larval recruitment is critical for population maintenance and colonization via migration among separated sites. The vent-endemic limpet, Lepetodrilus nux, is abundant at deep-sea hydrothermal vents in the Okinawa Trough, a back-arc basin in the northwestern Pacific; nonetheless, it is endangered due to deep-sea mining. This species is associated with many other vent species and is an important successor in these vent ecosystems. However, limpet genetic diversity and connectivity among local populations have not yet been examined. We conducted a population genetics study of L. nux at five hydrothermal vent fields (maximum geographic distance, ~545 km; depths ~700 m to ~1650 m) using 14 polymorphic microsatellite loci previously developed. Genetic diversity has been maintained among these populations. Meanwhile, fine population genetic structure was detected between distant populations, even within this back-arc basin, reflecting geographic distances between vent fields. There was a significant, positive correlation between genetic differentiation and geographic distance, but no correlation with depth. Contrary to dispersal patterns predicted by an ocean circulation model, genetic migration is not necessarily unidirectional, based on relative migration rates. While ocean circulation contributes to dispersal of L. nux among vent fields in the Okinawa Trough, genetic connectivity may be maintained by complex, bidirectional dispersal processes over multiple generations.

Effect of Sc addition on downstream processing of twin-roll cast Al−Cu−Li−Mg−Zr-based alloys

A processing scheme for preparing strips of Al−Cu−Li−Mg−Zr-based alloys microalloyed with Sc was proposed. This scheme includes a twin-roll casting of strips with a near-net-shaped 3 mm-thick gauge and a homogenization/solution treatment processing step. Two twin-roll cast Al−Cu−Li−Mg−Zr-based alloys were studied, one with an addition of 0.17 wt.% Sc, and the other without addition of Sc. Both alloys were annealed at 300 °C for 30 min, 450 °C for 30 min, and 530 °C for 30 min and quenched into room temperature water. The first two annealing steps provide a fine dispersion of Al3Zr/Al3(Sc,Zr) particles. The final annealing step serves as homogenization/solution treatment. A fine crystallization structure of the twin-roll cast materials enables the dissolution of primary particles containing the main alloying elements during a relatively short annealing time. Shorter soaking duration limits the depletion of surface layers from Li and significant coarsening of Al3Zr/Al3(Sc,Zr) dispersoids. The Sc-containing material has significantly finer grains already in the as-cast state. The Al3(Sc,Zr) dispersoids formed during the homogenization/solution treatment step prevent grain coarsening at high temperatures. Strengthening θ′(Al2Cu), T1(Al2CuLi), and rare S’(Al2CuMg) phases are formed during subsequent artificial aging at 180 °C. The increase in yield strength was 200 MPa in the peak-aged conditions. This value is comparable to the ones reported in similar direct-chill cast materials, thus validating the proposed processing scheme.

High-selectivity demethoxylation of lignin alkylmethoxyphenols enhanced by hydrogen spillover on Ag/Fe-CoOx nanocatalyst

This investigation focuses on the catalytic demethoxylation of alkylmethoxyphenols derived from lignin depolymerization, aiming to convert them with high selectivity into essential chemical intermediates, namely methoxy-free alkyl phenols. A silver-loaded iron-cobalt oxide (Ag/Fe-CoOx) nanocomposite catalytic system was developed, featuring a dual-active-site catalytic mechanism driven by a hydrogen-spillover effect that involves the activation of hydrogen at the metallic active site, while the support's secondary site serves as the reaction locus for the substrates. It was revealed that by integrating iron into cobalt oxide nanosheet supports, catalyst activity and selectivity were finely tuned, particularly to enhance the production of demethoxylated phenols. With the optimized Ag/Fe-CoOx catalyst, a 99.7 % conversion of 4-propylguaiacol and a 94.1 % selectivity for 4-propylphenol were achieved, indicating effective reductive demethoxylation at 280°C and 0.4 MPa H2. The fine structure of the support significantly affects demethoxylation selectivity, guiding the development of selective catalyst design in biomass conversion.

A recombinant amylomaltase from Thermus thermophilus STB20 can tailor the macromolecular characteristics of tapioca starch through its transglycosylation activity

Amylomaltase (AM) is a transglucosylase known for producing glucans exclusively with α-1,4 linkages, which is widely used in the industries for modification of starch. In this paper, a study was conducted to investigate both the characteristics of recombinant amylomaltase from Thermus thermophilus STB20 (TtAM) and its impact on the fine structure of tapioca starch. The TtAM showed an excellent thermostability and a high affinity for larger molecular substrates. Changes in the molecular characteristics of tapioca starch were discussed in terms of chain length distribution (CLD) and molecular weight distribution (Mw) under different enzyme dosages and reaction times. The TtAM degraded amylose, which was transferred to short side chains (DP 11-26) of amylopectin, thereby extending short side chains into longer chains (DP >26). The Mw of TtAM-treated starches initially increased and then decreased. With increasing enzyme dosage and reaction time, the TtAM facilitated hydrolysis activities, reducing the proportion of long side chains, which led to increase the dextrose equivalent (DE) value. Cycloamylose (DP 8 - 33) was generated during the modification process, reflecting a diversified range of the enzyme products, and resulting in a polymodal distribution profile in the Mw. These findings potentially broaden the utilization of TtAM in the production of starch conversion products, indicating that novel starch-based derivatives with tailor-made structures can be obtained by controlling the enzyme dosages and reaction times.

Resolution Dependence of Extreme Wind Speed Projections in the Great Lakes Region

Abstract The effect of anthropogenic climate change on extreme near-surface wind speeds is uncertain. Observed trends are weak and difficult to disentangle from internal variability, and model projections disagree on the sign and magnitude of trends. Standard coarse-resolution climate models represent the fine structures of relevant physical phenomena such as extratropical cyclones (ETCs), upper-level jet streaks, surface energy fluxes, and land surface variability less skillfully than their high-resolution counterparts. Here, we use simulations with the NCAR Community Earth System Model with both uniform (110 km) resolution and the variable-resolution configuration (VR-CESM-SONT, from 110 to 7 km) to study the effect of refined spatial resolution on projections of extreme strong and weak wind speeds in the Great Lakes region under end-of-century RCP8.5 forcing. The variable-resolution configuration projects strengthening of strong-wind events in the refined region with the opposite occurring in the uniform-resolution simulation. The two configurations provide consistent changes to synoptic-scale circulations associated with high-wind events. However, only the variable-resolution configuration projects weaker static stability, enhanced turbulent vertical mixing, and consequentially enhanced surface wind speeds because boundary layer dynamics are better captured in the refined region. Both models project increased frequency of extreme weak winds, though only VR-CESM-SONT resolves the cold-season inversions and summertime high temperatures associated with stagnant wind events. The identifiable mechanism of the changes to strong winds in VR-CESM-SONT provides confidence in its projections and demonstrates the value of enhanced spatial resolution for the study of extreme winds under climate change. Significance Statement In this study, we compare climate change projections of high and low extreme wind speeds in the Great Lakes region between a standard coarse-resolution simulation and a high-resolution simulation performed using the same climate model. The fine-resolution simulation projects strengthening high wind speeds, opposite to the coarse-resolution simulation. Both project increasing frequency of extreme weak winds, but the human-health-related impacts of stagnant winds are only captured at fine resolution. The changes in the coarse-resolution simulation are explained by changes to large-scale circulation, while the fine-resolution changes are linked to local processes the coarse model does not resolve. This helps explain the diverging projections of strong winds and gives greater credibility to the fine-resolution simulation.

The role of hidden hearing loss in tinnitus: Insights from early markers of peripheral hearing damage

Since the presence of tinnitus is not always associated with audiometric hearing loss, it has been hypothesized that hidden hearing loss may act as a potential trigger for increased central gain along the neural pathway leading to tinnitus perception. In recent years, the study of hidden hearing loss has improved with the discovery of cochlear synaptopathy and several objective diagnostic markers. This study investigated three potential markers of peripheral hidden hearing loss in subjects with tinnitus: extended high-frequency audiometric thresholds, the auditory brainstem response, and the envelope following response. In addition, speech intelligibility was measured as a functional outcome measurement of hidden hearing loss. To account for age-related hidden hearing loss, participants were grouped according to age, presence of tinnitus, and audiometric thresholds. Group comparisons were conducted to differentiate between age- and tinnitus-related effects of hidden hearing loss. All three markers revealed age-related differences, whereas no differences were observed between the tinnitus and non-tinnitus groups. However, the older tinnitus group showed improved performance on low-pass filtered speech in noise tests compared to the older non-tinnitus group. These low-pass speech in noise scores were significantly correlated with tinnitus distress, as indicated using questionnaires, and could be related to the presence of hyperacusis. Based on our observations, cochlear synaptopathy does not appear to be the underlying cause of tinnitus. The improvement in low-pass speech-in-noise could be explained by enhanced temporal fine structure encoding or hyperacusis. Therefore, we recommend that future tinnitus research takes into account age-related factors, explores low-frequency encoding, and thoroughly assesses hyperacusis.

Effect of Repulsive Electronic States on the Parameters of the Fine Structure of the Ground Electronic State of an OH Radical

Effect of Repulsive Electronic States on the Parameters of the Fine Structure of the Ground Electronic State of an OH Radical

A multicationic-substituted configurational entropy-enabled NASICON cathode for high-power sodium-ion batteries

Na-superionic-conductor (NASICON)-type Na3V2(PO4)3 is considered as one of the potential cathodes for sodium-ion batteries (SIBs), but its inherent low electronic conductivity and non-adjustable voltage plateau is an urgent issue hindrance to its practical application. Hereof, the concept of multicationic-substituted high-entropy doping is innovatively utilized to modify the fine structure within crystals, enhance electronic conductivity, and achieve excellent local diffusion kinetics and high redox activity according to theoretical calculations. The carbon-free Na3V1.8(CrMnFeZnAl)0.2(PO4)3 (HE-NVP-0.2) cathode exhibits a maximum specific capacity of 119.8 mA h g−1, achieved through V3+/V4+/V5+ redox reactions, while maintaining an impressive capacity retention rate of 80 % after 3000 cycles at 10 C. Moreover, the in-situ X-ray diffraction (XRD) analysis reveals that the incorporation of multi-(high entropy) elements induces a stable transition state, facilitating rapid phase transitions. Combined with in-situ digital image correlation (DIC), reversible structural evolution has been verified at both micro and macro scales. More competitively, coupling with a hard carbon (HC) anode, the HE-NVP-0.2//HC full cells exhibit exceptional energy density/power density characteristics while simultaneously maintaining excellent high-rate performance and prolonged cycle life (2000 stable cycles at 50 C). The regulation of configurational entropy enables the realization of an intermediate phase in the equilibrium state and makes the unlikely potential regulation possible, presenting innovative approaches to expedite the commercialization of high-power SIBs.

Perioperative echocardiography in minimally invasive surgery for hypertrophic obstructive cardiomyopathy.

Hypertrophic obstructive cardiomyopathy (HOCM) is clinically symptomatic and prone to malignant arrhythmias and sudden cardiac death (SCD). Currently, an effective treatment is surgical resection of the hypertrophic ventricular septum to relieve the left ventricular outflow tract (LVOT) obstruction and mitral insufficiency. Our center performs an innovative, minimally invasive right infra-axillary thoracotomy for transaortic septal myectomy. Minimally invasive procedures rely more on perioperative transesophageal echocardiography (TEE). This study aimed to explore the use of echocardiography during the perioperative period of surgical intervention for HOCM. Between August 2021 and April 2022, 27 patients with HOCM underwent cardiac surgery at our hospital. Minimally invasive transaortic septal resection (Morrow myectomy) was performed from the right axilla. The extent of myectomy and need for mitral valve repair were based on perioperative TEE assessment and surgical findings. The demographic parameters and clinical data of patients were recorded. The cardiopulmonary bypass time, aortic cross-clamp, and mechanical ventilation times were calculated. TEE was used to assess ventricular wall thickening and anatomical abnormalities of mitral regurgitation, assist in intravenous catheterization, and assess the postoperative gradients of the LVOT. Among the 27 patients with HOCM who underwent transaortic septal myectomy by minimally invasive right infra-axillary thoracotomy, 16 had LVOT obstruction, 2 had mid-LV obstruction, and 9 had both LVOT and mid-LV involvement. TEE provides information about the fine structure of the LV cavity and the etiology of the obstruction. In all cases, LVOT obstruction and mitral valve systolic anterior motion were resolved postoperatively, and the degree of mitral regurgitation was significantly reduced. Perioperative echocardiography provides valuable information regarding the complex etiology of LVOT obstruction during minimally invasive right infra-axillary thoracotomy for transaortic septal myectomy. It helps determine the extent of septal resection and assess the need for concomitant mitral valve repair.

A novel AlCo1.2Cr0.8FeNi2.1 eutectic high entropy alloy with excellent corrosion resistance

A novel AlCo1.2Cr0.8FeNi2.1 eutectic high entropy alloy (EHEA) was designed and prepared. The microstructure of the as-cast alloy was characterized that a fine lamellar structure composed of FCC (L12) phase and B2 phase. The mechanical of the EHEA was studies by the tensile tests, and the corrosion properties of the EHEA in 3.5 wt% NaCl solution at room temperature was investigated. The results shown that the alloy exhibits synergistic effect of strength- plasticity with a high tensile strength of 1048.42 MPa and an excellent elongation of 18.92%. Potentiodynamic polarization test and electrochemical impedance spectroscopy (EIS) indicated that the EHEA exhibits spontaneous passivation in 3.5 wt% NaCl solution, forming a protective passive film that exhibits p-type and n-type semiconductor properties, with the main components of Al2O3, CoO, Cr2O3, Fe(OH)3, and NiO. Furthermore, the corrosion mechanism of EHEA was discussed.

The enigma of fine mobile structures on the aortic surface in a patient undergoing transcatheter aortic valve replacement: a case report

Abstract Background The surface of the aorta generally does not show motion unless mobile atheroma, thrombi, vegetations, or intimal flaps are present. We previously described unusual mobile filamentous structures in the carotid artery. Here, we describe similar findings in the aorta and their possible cause. Case summary An 88-year-old female with progressive exertional dyspnoea and severe aortic stenosis had a successful transcatheter aortic valve replacement (TAVR). A filamentous structure was noted on the focused pre-operative 2D transoesophageal echocardiography in the proximal descending aorta and post-TAVR as long strand-like structures attached to the thickened intimal wall with a planar component on 3D imaging. These findings were not associated with symptoms or clinical sequelae on short- and long-term follow-up. Discussion The mobile structures that we describe are atypical for atheroma, thrombi, vegetations, and dissections in terms of their form and clinical presentation. 2D imaging showed that the filaments had focal thickening and emerged from the aortic surface. These findings suggest a relationship with the intima, perhaps from atherogenesis or injury with disruption or lifting of the intimal surface. No clinical sequelae were detected that may also relate to their position in the descending aorta and not the arch.

Visualization of Reissner's membrane in the mouse inner ear using highly sensitive magnetic resonance imaging analysis

Although research on hearing loss, including the identification of causative genes, has become increasingly active, the pathogenic mechanism of hearing loss remains unclear. One of the reasons for this is that the structure of the inner ear of mice, which is commonly used as a genetically modified animal model, is too small and complex, making it difficult to accurately capture abnormalities and dynamic changes in vivo. Especially, Reissner's membrane is a very important structure that separates the perilymph and endolymph of the inner ear. This malformation or damage induces abnormalities in hearing and balance. Until now, imaging analyses, such as magnetic resonance imaging (MRI) and computed tomography, are performed to investigate the inner ear structure in vivo; however, it has been difficult to analyze the small inner ear structure of mice owing to resolution. Therefore, there is an urgent need to develop an image analysis method that can accurately capture the structure of the inner ear of mice including Reissner's membrane, both dynamically and statically.This study aimed to investigate whether it is possible to accurately capture the structure (e.g., Reissner's membrane) and abnormalities of the inner ear of mice using an 11.7 T MRI. By combining two types of MRI methods, in vivo and ex vivo, we succeeded for the first time in capturing the fine structure of the normal mouse inner ear, such as the Reissner's membrane, and inflammatory lesions of otitis media mouse models in detail and accurately. In the future, we believe that understanding the state of Reissner's membrane during living conditions will greatly contribute to the development of research on inner ear issues, such as hearing loss.

An Analysis of a Coarse-Group Subgroup Method Based on the Physical Probability Tables in APOLLO3®

The legacy subgroup method of the APOLLO3® code, denoted the SG-GR-383g method in this paper, relies on the fine structure equation solved by the means of the General Resonance model and of the mathematical probability tables (MPTs) that are computed on the fly for the resonant mixture. Because of the use of these MPTs, a fine energy structure of 383 groups has to be employed. In our recent work, with the intention of decreasing computational time, a subgroup method adapted to coarse-group calculations has been implemented in APOLLO3. It is based on the use of physical probability tables (PPTs), taking into account the mixture treatment, and on the Intermediate Resonance model to derive the subgroup equations, as well as the application of the Superhomogenization correction to ensure the preservation of the reaction rates in a multigroup calculation. This method, denoted SG-IR-69g in this paper, uses a 69-coarse-group energy mesh. This paper presents a comparison of the SG-IR-69g method with the legacy SG-GR-383g method, taking as reference the continuous-energy Monte Carlo TRIPOLI-4® calculations on test cases of 3 × 3 pin cells, with a central cell being either a water hole or a Gd-UO2 pin cell surrounded by UO2 pin cells. Similar accuracy on the multiplication factor was obtained for both the SG-GR-383g and SG-IR-69g methods, although more error compensations were found in the multigroup reaction rates of the latter. Even though the calculation of PPTs is more expensive than that of the mathematical ones, overall the SG-IR-69g method is more time efficient thanks to the decrease in the number of energy groups.

Konjac glucomannan/xanthan synergistic interaction gel: Effect of the fine structure of xanthan on enthalpy driven assembly behavior and gel strength

Understanding the intricate relationships between the fine structure of xanthan on the assembly of konjac glucomannan (KGM) and xanthan is crucial for developing KGM/xanthan synergistic interaction gels. A combination of micro-differential scanning calorimetry, rheometry and atomic force microscopy were employed to explore the assembly process of KGM and xanthan with varying fine structures. Xanthan possessing standard acetyl (4.57%) and high pyruvate group contents (6.49%)(SA/HP) exhibited type-A and type-B bindings when interacting with KGM through cooling process. Decreasing these group contents effectively reduced type-B binding. Additionally, removal of pyruvate groups to 5.53% amplified type-A binding and gel strength from 258 Pa to 653 Pa, thanks to the improved helical structure forming ability of xanthan. Decreasing acetyl groups also intensified type-A interaction and gel strength from 258 Pa to 872 Pa. This stemmed from the formation of more stable assembly structure of xanthan and KGM, compared to the helical structure of deacetylated xanthan. These findings hold promise for the rational design of KGM/xanthan systems for versatile applications.

Photon-counting detector CT - first experiences in the field of musculoskeletal radiology.

The introduction of photon-counting detector CT (PCD-CT) marks a remarkable leap in innovation in CT imaging. The new detector technology allows X-rays to be converted directly into an electrical signal without an intermediate step via a scintillation layer and allows the energy of individual photons to be measured. Initial data show high spatial resolution, complete elimination of electronic noise, and steady availability of spectral image data sets. In particular, the new technology shows promise with respect to the imaging of osseous structures. Recently, PCD-CT was implemented in the clinical routine. The aim of this review was to summarize recent studies and to show our first experiences with photon-counting detector technology in the field of musculoskeletal radiology.We performed a literature search using Medline and included a total of 90 articles and reviews that covered recent experimental and clinical experiences with the new technology.In this review, we focus on (1) spatial resolution and delineation of fine anatomic structures, (2) reduction of radiation dose, (3) electronic noise, (4) techniques for metal artifact reduction, and (5) possibilities of spectral imaging. This article provides insight into our first experiences with photon-counting detector technology and shows results and images from experimental and clinical studies. · This review summarizes recent experimental and clinical studies in the field of photon-counting detector CT and musculoskeletal radiology.. · The potential of photon-counting detector technology in the field of musculoskeletal radiology includes improved spatial resolution, reduction in radiation dose, metal artifact reduction, and spectral imaging.. · PCD-CT enables imaging at lower radiation doses while maintaining or even enhancing spatial resolution, crucial for reducing patient exposure, especially in repeated or prolonged imaging scenarios.. · It offers promising results in reducing metal artifacts commonly encountered in orthopedic or dental implants, enhancing the interpretability of adjacent structures in postoperative and follow-up imaging.. · With its ability to routinely acquire spectral data, PCD-CT scans allow for material classification, such as detecting urate crystals in suspected gout or visualizing bone marrow edema, potentially reducing reliance on MRI in certain cases.. Bette S, Risch F, Becker J et al. Photon-counting detector CT - first experiences in the field of musculoskeletal radiology. Fortschr Röntgenstr 2024; DOI 10.1055/a-2312-6914.

Secular structure of 1:2 and 1:3 mean motion resonances with Neptune

The 1:N mean motion resonances (MMRs) with Neptune are of particular interest in astrophysical research because they have two asymmetric resonance islands, where the distribution of trapped objects may bear important clues to resolving the history of the Solar System. To explore the dynamics of these resonances and to investigate whether the imprints left by the early stage evolution can be preserved in the resonances, we conducted a comprehensive analysis of the 1:2 and 1:3 resonances. By mainly adopting the frequency analysis method, we calculated the proper frequencies of the motion of objects in the resonances and determined the secular mechanisms that influence the dynamics. Using the spectral number (SN) as an indicator of orbital regularity, we constructed dynamical maps on representative planes. After comparing the structures in the maps with the locations of the secular mechanisms, we find that the von-Zeipel-Lidov-Kozai mechanism and the $g=2s$ mechanism destabilize the influenced orbits and thus sculpt the overall structure of the 1:2 and 1:3 resonances. The secular resonance of $2g-s=s_8$ opens a channel for objects to switch between the leading and trailing resonance islands, which can alter the population ratio between these two islands. The secondary resonances associated with the quasi 2:1 resonance between Uranus and Neptune were also detected, likely introducing more chaos to the motion. The fine dynamical structures of the 1:2 and 1:3 resonances revealed in this paper, combined with knowledge of resonant capture, provide a compelling explanation for the eccentricity distribution of observed Twotinos. Furthermore, we anticipate a more complete understanding of the history of planetary migration in the Solar System can be achieved by comparing the results in this paper with the populations in the 1:N resonances, with forthcoming observations offering more objects for study in the future.

Longitudinal-transverse splitting and fine structure of Fermi polarons in two-dimensional semiconductors

Interaction of excitons with resident charge carriers in semiconductors gives rise to bound three-particle complexes, trions, whose optical response is conveniently described in the framework of many-body correlated Fermi polaron states. These states are formed as a result of correlation of photocreated trion with the Fermi sea hole and possess the angular momentum component of ±1 depending on the helicity of the photon. We study theoretically the energy spectrum fine structure of Fermi polarons in two-dimensional semiconductors based on transition metal dichalcogenides. We demonstrate both by the symmetry analysis and microscopic calculation that the Fermi polarons with nonzero in-plane wavevector k are split, similarly to the neutral exciton states, into the linearly polarized longitudinal and transverse, with respect to the k, states. The origin of this longitudinal-transverse splitting is the long-range electron-hole exchange interaction that can be also described as the interaction of Fermi polarons with their induced electromagnetic field. The effective Hamiltonian describing the Fermi polaron fine structure is derived, and its parameters are determined from the microscopic model.