Film-based Surface Plasmon Resonance Research Articles

Hyperbolic-Metamaterials-Based SPR Temperature Sensor Enhanced by a Nanodiamond-PDMS Hybrid for High Sensitivity and Fast Response.

A high-performance surface plasmon resonance (SPR) fiber sensor is proposed with hyperbolic metamaterials (HMMs), nanodiamonds (NDs), and polydimethylsiloxane (PDMS) to enhance the temperature sensitivity and response time. The HMM with tunable dispersion can break through the structural limitations of the optical fiber to improve the refractive index (RI) sensitivity, while NDs and PDMS with large thermo-optic coefficients enable to induce significant RI change under varied thermal fields. The ternary composite endows the sensor with a high temperature sensitivity of -9.021 nm/°C, which is 28.6 times higher than that of the conventional gold film-based SPR sensor. Furthermore, NDs with high thermal conductivity (2200 W/mK) effectively expedite the thermal response of PDMS, which reduces the response time from 80 to 6 s. It is believed that the proposed sensors with high sensitivity, fast response time, and compact size have great potential for applications in industrial production, healthcare, environmental monitoring, etc.

Graphene and Nickel Nanomaterials Based Surface Plasmon Resonance (SPR) Biosensor: A Theoretical Study

An extremely sensitive surface plasmon resonance (SPR) based biosensor has been simulated in the present study using an angular interrogation technique. The large surface area of the graphene layer facilitates biomolecule absorption. The SPR biosensor is proposed in a five-layer Kretschmann configuration with a ferromagnetic material and a silver layer. The proposed SPR biosensor’s sensitivity has been significantly raised in comparison to traditional film-based SPR biosensors. By refining the proposed structure to include a ferromagnetic materials nickel and monolayer of graphene with thicknesses of 15 nm and 0.34 nm and a silver layer of 45 nm, respectively, it is possible to increase sensitivity to 266°/RIU. Furthermore, the proposed SPR sensor design has a very small FWHM, a high detection accuracy (DA), and a high-quality factor (QF). Monolayer of graphene with a fixed mono-layer Nickle configuration were found to have the highest sensitivity of 266°/RIU. Additionally, it should be noted that the proposed SPR biosensor exhibits superior performance compared to SPR sensor parameters previously recorded.

Theory and Modeling of Slab Waveguide Based Surface Plasmon Resonance

The current study proposes a developing surface plasmon resonance (SPR) sensor that has been widely employed to detect viruses, such as environmental analytes, biological and chemical analytes, and monitoring and medical diagnostics. Optical waveguides have much potential for developing new chemical and biological sensors. Graphene is the world's most vital substance and can be used to enhance other materials. A composite silver film-based SPR sensor with the waveguide. To enhance the silver film's stability, detect the best thickness with the best resonance using different types of analyte: air than 1.1, 1.2, 1.3, and water. The resonance wavelength numerically calculated, loss, sensitivity, Figure of merit FOM, and Refractive index using Lumerical FDE. The numerical data showed the differences in the electric field of SPR in the number of refractive indexes after applying the silver coating layer, and the performance parameters improved. Moreover, Graphene has much promise, yet almost most of it is still unexplored. The fundamentals of graphene-based waveguides and devices were investigated using two layers with FDE. The primary purpose of this study is to show the effective thickness of the Graphene and the analyte's refractive index to get high absorption.

Femtomolar detection of dopamine using surface plasmon resonance sensor based on chitosan/graphene quantum dots thin film

Due to the crucial role of dopamine (DA) in health and peripheral nervous systems, it is particularly important to develop an efficient and accurate sensor to monitor and determine DA concentrations for diagnostic purposes and diseases prevention. Up to now, using surface plasmon resonance (SPR) sensors in DA determination is very limited and its application still at the primary stage. In this work, a simple and ultra-sensitive SPR sensor was constructed for DA detection by preparation of chitosan- graphene quantum dots (CS-GQDs) thin film as the sensing layer. Other SPR measurements were conducted using different sensing layers; GQDs, CS for comparison. The proposed thin films were prepared by spin coating technique. The developed CS-GQDs thin film-based SPR sensor was successfully tested in DA concentration range from 0 fM to 1 pM. The designed SPR sensor showed outstanding performance in detecting DA sensitively (S = 0.011°/fM, R2 = 0.8174) with low detection limit of 1.0 fM has been achieved for the first time. The increased angular shift of SPR dip, narrow full width half maximum of the SPR curves, excellent signal-to-noise ratio and figure of merit, and a binding affinity constant (KA) of 2.962 PM−1 demonstrated the potential of this sensor to detect DA with high accuracy. Overall, it was concluded that the proposed sensor would serve as a valuable tool in clinical diagnostic for the serious neurological disorders. This in turns has a significant socio-economic impact.

A sensing approach for manganese ion detection by carbon dots nanocomposite thin film-based surface plasmon resonance sensor

Although plenty of carbon dots have been synthesized by many kinds of synthesis methods, their potential in metal sensing applications is still limited. Herein, the application of carbon dots-cellulose nanocrystals (CDs-CNC) thin film towards manganese ions sensing was demonstrated experimentally using surface plasmon resonance (SPR) sensor. The experimental results showed that the CDs-CNC thin film-based SPR sensor provides the detection of parts per billion concentrations of Mn2+ in an aqueous solution with high sensitivity response of 0.0534° ppb-1. The thickness and refractive index of thin films were then determined by fitting the experimental SPR spectra using the WinSpall simulation program. The proposed CDs-CNC thin film-based SPR sensor exhibit better sensing performance in comparison to the previous film-based sensor, suggesting the suitable technology candidate for environmental monitoring applications.

Gold-silver alloy film based surface plasmon resonance sensor for biomarker detection.

In this study, we developed a gold‑silver alloy film based surface plasmon resonance (AuAg-SPR) sensor with wavelength interrogation to detect cancer antigen 125 (CA125) using a sandwich immunoassay. We first theoretically simulated the sensitivity of conventional gold film based SPR (Au-SPR) sensor and AuAg-SPR sensor, and conducted a series of experiments to investigate the sensitive characteristics of AuAg-SPR sensor, including the angle and refractive index (RI) sensitivity. We then conducted CA125 detection experiments on these two types of sensors. The results demonstrated that the limit of detection (LOD) of CA125 on the AuAg-SPR sensor was 0.1U/mL (0.8ng/mL) based on its direct reaction with an immobilised antibody, which was two orders of magnitude lower than that of the Au-SPR sensor (10U/mL). The total changes in the resonance wavelength (∆λR) of the former were 1.7-fold those of the latter. The volume fractions of the adsorbates (fad) and effective RIs (nadlayer) in each adlayer were then calculated and the effect of the antibody size on the detection results was analysed. The AuAg-SPR sensors had a higher sensitivity than the conventional Au-SPR sensors for detecting CA125 due to their electric field characteristics. Therefore, these will have better application prospects.

Quantitative and Selective Surface Plasmon Resonance Response Based on a Reduced Graphene Oxide-Polyamidoamine Nanocomposite for Detection of Dengue Virus E-Proteins.

Dengue viral infection is one of the most common deadliest diseases and has become a recurrent issue for public health in tropical countries. Although the spectrum of clinical diagnosis and treatment have recently been established, the efficient and rapid detection of dengue virus (DENV) during viremia and the early febrile phase is still a great challenge. In this study, a dithiobis (succinimidyl undecanoate, DSU)/amine-functionalized reduced graphene oxide-–polyamidoamine dendrimer (DSU/amine-functionalized rGO–PAMAM) thin film-based surface plasmon resonance (SPR) sensor was developed for the detection of DENV 2 E-proteins. Different concentrations of DENV 2 E-proteins were successfully tested by the developed SPR sensor-based system. The performance of the developed sensor showed increased shift in the SPR angle, narrow full-width–half-maximum of the SPR curve, high detection accuracy, excellent figure of merit and signal-to-noise ratio, good sensitivity values in the range of 0.08–0.5 pM (S = 0.2576°/pM, R2 = 0.92), and a high equilibrium association constant (KA) of 7.6452 TM−1. The developed sensor also showed a sensitive and selective response towards DENV 2 E-proteins compared to DENV 1 E-proteins and ZIKV (Zika virus) E-proteins. Overall, it was concluded that the Au/DSU/amine-functionalized rGO–PAMAM thin film-based SPR sensor has potential to serve as a rapid clinical diagnostic tool for DENV infection.

Maleic anhydride and acetylene plasma copolymer surfaces for SPR immunosensing

We report on the successful application of carboxyl-rich plasma polymerized (PP) films as a matrix layer for bioreceptor immobilization in surface plasmon resonance (SPR) immunosensing. Composition and chemical properties of the carboxyl-rich PP films deposited from a mixture of maleic anhydride and acetylene were investigated. Changes in the films stored in air, water, and buffer were studied and the involved chemical changes were described. Performance in SPR immunosensing was evaluated on interactions of human serum albumin (HSA) with a specific monoclonal antibody. The comparison with the mixed self-assembled monolayer of mercaptoundecanoic acid and mercaptohexanol (MUA/MCH) and one of the most widely used surfaces for SPR, the 2D and 3D carboxymethylated dextran (CMD), was presented to show the efficacy of plasma polymerized matrix layers for biosensing. The PP film-based SPR immunosensor provided a similar detection limit of HSA (100ng/mL) as MUA/MCH- (100ng/mL) and 3D CMD (50ng/mL)-based sensors. However, the response levels were about twice higher in case of the PP film-based immunosensor than in case of MUA/MCH-based alternative. The PP film surfaces had similar binding capacity towards antibody as the 3D CMD layers. The response of PP film-based sensor towards HSA was comparable to 3D CMD-based sensor up to 2.5μg/mL. For the higher concentrations (> 10μg/mL), the response of PP film-based immunosensor was lower due to inaccessibility of active sites of the immobilized antibody inside the flat PP film surface. We have demonstrated that due to its high stability and cost-effective straightforward preparation, the carboxyl-rich PP films represent an efficient alternative to self-assembled monolayers (SAM) and dextran-based layers in label-free immunosensing. Graphical abstract.

纳米多孔金膜表面等离子体共振传感器的制备与表征

纳米多孔金膜表面等离子体共振传感器的制备与表征

A novel surface plasmon resonance biosensor based on the PDA-AgNPs-PDA-Au film sensing platform for horse IgG detection

Herein we report a novel polydopamine-silver nanoparticle-polydopamine-gold (PDA-AgNPs-PDA-Au) film based surface plasmon resonance (SPR) biosensor for horse IgG detection. The PDA-AgNPs-PDA-Au film sensing platform was built on Au-film via layer-by-layer self-assembly. Ag ion was reduced in situ to AgNPs in presence of PDA. The top PDA layer can prevent AgNPs from being oxidized and connect with antibody via Schiff alkali reaction directly. The morphology and thickness of the modified gold film were characterized using scanning electron microscope and Talystep. Experimental results show that the PDA-AgNPs-PDA-Au film sensing platform is stable, regenerative and sensitive for horse IgG detection. The detection limit of horse IgG obtained with the present biosensor is 0.625μgmL−1, which is 2-fold and 4-fold lower than that obtained with biosensor based on PDA modified Au film and conventional biosensor based on MPA, respectively. Furthermore, when challenged to real serum samples, our sensor exhibited excellent specificity to horse IgG, suggesting its potential for industrial application.

Graphene/Graphene Oxide-Based Ultrasensitive Surface Plasmon Resonance Biosensor

Surface plasmon resonance (SPR)-based biosensing is an accurate and sensitive technique used to evaluate the biomolecular interactions in real time in a label-free environment. Several new approaches have been proposed to improve the sensitivity of SPR sensors. The development of sensing surfaces can significantly improve the performance of biosensors; graphene and graphene oxide (GO) offer several advantages due to their extraordinary optical and structural properties. In this paper, the SPR biosensor structure based on graphene and GO linking layers are suggested. For proposed configurations, the features and characteristics such as reflectivity and sensitivity using the finite element analysis (FEA) model are discussed and compared with results from N-layer model. The effect of cap layer thickness in the sensitivity of the SPR biosensor has been calculated. Computational results show that the proposed graphene and GO-based SPR biosensor have more than two and four times greater sensitivity than the conventional gold film-based SPR sensor respectively due to their better adsorption of biomolecules.

A novel double-layer molecularly imprinted polymer film based surface plasmon resonance for determination of testosterone in aqueous media

This work aimed to prepare a novel double-layer structure molecularly imprinted polymer film (MIF) on the surface plasmon resonance (SPR) sensor chips for detection of testosterone in aqueous media. The film was synthesized by in-situ UV photo polymerization. Firstly, the modification of gold surface of SPR chip was performed by 1-dodecanethiol. Then double-layer MIF was generated on the 1-dodecanethiol modified gold surface. The non-modified and imprinted surfaces were characterized by atomic force microscopy (AFM), fourier transform infrared (FTIR) spectroscopy and contact angle measurements. Analysis of SPR spectroscopy showed that the imprinted sensing film displayed good selectivity for testosterone compared to other analogues and the non-imprinted polymer film (NIF). Within the concentrations range of 1×10−12–1×10−8mol/L, the coupling angle changes of SPR were linear with the negative logarithm of testosterone concentrations (R2=0.993). Based on a signal/noise ratio of three, the detection limit was estimated to be 10−12mol/L. Finally, the developed MIF was successfully applied to the seawater detection of testosterone. The results in the experiments suggested that a combination of SPR sensing with MIF was a promising alternative method for detection of testosterone in aqueous media.

Graphene oxide-based SPR biosensor chip for immunoassay applications.

This work develops a highly sensitive immunoassay sensor for use in graphene oxide sheet (GOS)-based surface plasmon resonance (SPR) chips. This sensing film, which is formed by chemically modifying a GOS surface, has covalent bonds that strongly interact with the bovine serum albumin (BSA), explaining why it has a higher sensitivity. This GOS film-based SPR chip has a BSA concentration detection limit that is 100 times higher than that of the conventional Au-film-based sensor. The affinity constants (KA) on the GOS film-based SPR chip and the conventional SPR chip for 100 μg/ml BSA are 80.82 × 106 M-1 and 15.67 × 106 M-1, respectively. Therefore, the affinity constant of the GOS film-based SPR chip is 5.2 times higher than that of the conventional chip. With respect to the protein-protein interaction, the SPR sensor capability to detect angle changes at a low concentration anti-BSA of 75.75 nM on the GOS film-based SPR chip and the conventional SPR chip is 36.1867 and 26.1759 mdeg, respectively. At a high concentration, anti-BSA of 378.78 nM on the GOS film-based SPR chip and the conventional SPR chip reveals two times increases in the SPR angle shift. Above results demonstrate that the GOS film is promising for highly sensitive clinical diagnostic applications.

Molecularly imprinted polymer thin film based surface plasmon resonance sensor to detect hemoglobin

Molecularly imprinted polymer(MIP) films for hemoglobin detection were prepared onto the Au/Cr coated surface plasmon resonance(SPR) sensor chips by the in situ electropolymerization of 3-aminophenylboronic acid(3-APBA). The formation of the films and rebinding processes of hemoglobin were monitored by in situ electrochemical-SPR(EC-SPR) spectroscopy, with allowed real-time observation of the simultaneous changes in electrochemical and optical properties of the films. Scanning electron microscopy(SEM) and atomic force microscopy(AFM) were used to characterize the surface morphologies of the MIP films. The effects of pH, ion strength, different metal ions on rebinding Hb, the specific binding and the selective recognition were investigated. The results obtained with the molecular imprinted SPR chips indicate a good adsorption of Hb in a range of 0.0005–5 mg/mL in 0.05 mol/L sodium phosphate buffer at pH=7.0. A linear calibration curve(R 2=0.94) of the SPR sensor for Hb detection was obtained in a range of 0.05–5 mg/mL. The detection limit for hemoglobin by this method was 0.000435 mg/mL(S/N=3). Interference studies indicate that the MIP films have a good selectivity compared with the referenced proteins. The stability of the sensor was also established. Results indicate that the SPR sensor chip keeps 87.6% of its original response after 14 d of storage under dry and ambient conditions.

Sensitivity enhancement of surface plasmon resonance sensor using continuous film metallic gratings

A surface plasmon resonance (SPR) sensor based on continuous film metallic gratings is numerically investigated for enhance sensitivity. The results calculated by rigorous coupled-wave analysis (RCWA) present that interplays between localized surface plasmons and surface plasmons polaritons contribute to sensitivity enhancement. The sensitivity enhancement factor (SEF), which represents the influence of metallic grating, increased as the grating period decreased. In addition, several reflection dips can be achieved as the period of metallic grating increased. By double-dips method, the sensitivity SPR sensor based on continuous film grating-based is improved into 153.23°/RIU, which is more sensitive than conventional thin film-based SPR sensor in the same condition. The SPR sensor based on continuous film metallic gratings exhibits good linearity.

Enhanced detection of virus particles by nanoisland-based localized surface plasmon resonance

In this paper, we investigate localized surface plasmon resonance (SPR) detection based on nanoislands. Theoretical calculation performed with rigorous coupled-wave analysis and analytical transfer matrix method using effective medium theory suggests improvement on nanoislands in the limit of detection and sensitivity over conventional thin film-based SPR detection. Experimental results obtained with non-specific detection of ambient adenovirus confirm the improvement by more than one order of magnitude increase in the limit of detection. The enhancement achieved with nanoislands was explored in connection with efficient overlap between target and near-field distribution produced by nanoislands.

Grating-based surface plasmon resonance detection of core-shell nanoparticle mediated DNA hybridization

In this report, we have investigated enhanced surface plasmon resonance (SPR) detection of DNA hybridization using gold core – silica shell nanoparticles in localized plasmonic fields. The plasmonic fields were localized by periodic linear gratings. Experimental results measured for hybridization of 24-mer single-stranded DNA oligomers suggest that core-shell nanoparticles (CSNPs) on gratings of 400 nm period provide enhanced optical signatures by 36 times over conventional thin film-based SPR detection. CSNP-mediated DNA hybridization produced 3 times larger angular shift compared to gold nanoparticles of the same core size. We have also analyzed the effect of structural variation. The enhancement using CSNPs was associated with increased surface area and index contrast that is combined by improved plasmon coupling with localized fields on gratings. The combined approach for conjugated measurement of a biomolecular interaction on grating structures is expected to lower the limit of detection to the order of a few tens of fg/mm 2.

Sensitivity Enhancement of Surface Plasmon Resonance Imaging Using Periodic Metallic Nanowires

A nanowire-mediated surface plasmon resonance (SPR) imaging is numerically investigated for enhanced sensitivity. The results calculated by rigorous coupled-wave analysis present that interplays between localized surface plasmons and surface plasmon polaritons contribute to sensitivity enhancement. Compared to conventional thin film-based SPR imaging measurement, an optimal nanowire structure can provide sensitivity enhancement by 3.44 times as well as highly linear detection property for quantification of surface reactions of interests. This paper demonstrates the potential and limitation for a highly sensitive, label-free, and real-time SPR imaging sensor based on periodic metallic nanowires.