Fibroblast Cell Proliferation Research Articles

Experimental study of Pruthvisara taila in excised wound model in Wistar albino rats

Pruthvisara taila is a formulation indicated in the chikitsa of vrana as topical medicine in classical text Chakradatta. It contains Shuddha chitrakamoola, Shuddha vatsanabha, Shuddha karaveera, Nirgundi moola, Nadibeeja, Kanji and Karanja taila as the base. Aims and Objectives: Evaluation of wound healing property of Pruthvisara taila through experimental study. Methodology: Wound healing property in albino rats by excision wound healing model and its histopathology study. Results: Results of the study on the parameters assessed like percentage of wound contraction and histopathology study; percentage of wound closure was observed in Control group was 94.92%, in standard it was 93.73% and in test drug the percentage of wound contraction was 95.73%.The test drug, Pruthvisara taila showed more angiogenesis and formation of new blood vessels than standard group and in control group there was absence of formation of new blood vessels and proliferation of fibroblast cells. The control group did not show any collagen formation and scab formation the test drug Pruthvisara taila showed moderate formation and deposition compared to standard drug. Compared to control and standard group, the test drug, Pruthvisara taila selected in this study showed remarkable wound healing property in excised wound.

Effects of a Bioengineered Allogeneic Cellularized Construct (BACC) on Primary Human Macrophage Phenotype.

The mechanisms behind the pro-healing effects of multicellular, bioengineered allogeneic cellularized constructs (BACC) are not known. Macrophages are key regulators of every phase of the wound healing process and the primary cells that mediate the response to biomaterials. It is hypothesized that cells within the BACC modulate macrophage behavior, which may contribute to the mechanism by which BACC promotes healing. To probe the influence of cells within the BACC compared to effects of the underlying collagen substrate, primary human macrophages are cultured in direct or indirect contact with BACC or with the same collagen substrate used in the BACC manufacturing. Macrophage phenotype is characterized over time via multiplex gene expression, protein secretion, multidimensional flow cytometry, and functional assays with fibroblasts and endothelial cells. The BACC causes macrophages to exhibit a predominately reparative phenotype over time compared to relevant collagen substrate controls, with multiple subpopulations expressing both pro-inflammatory and reparative markers. Conditioned media from macrophage-BACC co-cultures causes distinct effects on fibroblast and endothelial cell proliferation, migration, and network formation. Given the critical role of the reparative macrophage phenotype in wound healing, these results suggest that modulation of macrophage phenotype may be a critical part of the mechanisms behind BACC's pro-healing effects.

Flexible Triboelectric Nanogenerator for Promoting the Proliferation and Migration of Human Fibroblast Cells.

Chronic wound healing is often a prolonged process with the migration and proliferation of fibroblast cells playing crucial roles. Electrical stimulation (ES) has emerged as a promising physical therapy modality to promote these key events. In this study, we address this issue by employing a triboelectric nanogenerator (TENG) as an electrical stimulator for both drug release and the stimulation of fibroblast cells. The flexible TENG with a sandwich structure was fabricated using a PCL nanofibrous layer, Kapton, and silicon rubber. The TENG could be folded to any degree and twisted, and it could return to its original shape when the force was removed. Cultured cells received ES twice and three times daily for 8 days, with a 30 min interval between sessions. By applying current in a safe range and appropriate time (twice daily), fibroblasts demonstrate an accelerated proliferation and migration rate. These observations were confirmed through cell staining. Additionally, in vitro tests demonstrated the TENG's ability to simultaneously provide ES and release vitamin C from the patch. After 2 h, the amount of released drug increased 2 times in comparison to the control group. These findings provide support for the development of a TENG for the treatment of wounds, which underlines the promise of this new technique for developing portable electric stimulation devices.

Combined Amniotic Membrane and Self-Powered Electrical Stimulator Bioelectronic Dress Promotes Wound Healing.

Human amniotic membranes (hAMs) are widely used as wound management biomaterials, especially as grafts for corneal reconstruction due to the structure of the extracellular matrix and excellent biological properties. However, their fragile nature and rapid degradation rate hinder widespread clinical use. In this work, we engineered a novel self-powered electronic dress (E-dress), combining the beneficial properties of an amniotic membrane and a flexible electrical electrode to enhance wound healing. The E-dress displayed a sustained discharge capacity, leading to increased epidermal growth factor (EGF) release from amniotic mesenchymal interstitial stem cells. Live/dead staining, CCK-8, and scratch-wound-closure assays were performed in vitro. Compared with amniotic membrane treatment alone, the E-dress promoted cell proliferation and migration of mouse fibroblast cells and lower cytotoxicity. In a mouse full-skin defect model, the E-dress achieved significantly accelerated wound closure. Histological analysis revealed that E-dress treatment promoted epithelialization and neovascularization in mouse skin. The E-dress exhibited a desirable flexibility that aligned with tissue organization and displayed maximum bioactivity within a short period to overcome rapid degradation, implying great potential for clinical applications.

3D-printing of alginate/gelatin scaffold loading tannic acid@ZIF-8 for wound healing: In vitro and in vivo studies

In the present study, ZIF-8 metal-organic framework (MOF) modified with Tannic acid (TA@ZIF-8) was synthesized and impregnated in alginate-gelatin (Alg-Gel) hydrogel. The Alg-Gel scaffolds containing 0, 5, and 10 % of TA@ZIF-8 were fabricated through the 3D printing method specifically denoted as Alg-Gel 0 %, Alg-Gel 5 %, and Alg-Gel 10 %. XRD, FTIR, FESEM, and EDX physically and chemically characterized the synthesized ZIF-8 and TA@ZIF-8 MOFs. Besides, Alg-Gel containing TA@ZIF-8 prepared scaffolds and their biological activity were also evaluated. SEM images verified the nano-size formation of MOFs. Improved swelling and decreased degradation rates after adding TA@ZIF-8 were also reported. Increased compression strength from 0.628 to 1.63 MPa in Alg-Gel 0 % and Alg-Gel 10 %, respectively, and a 2.19 increase in elastic modulus in Alg-Gel 10 % scaffolds were exhibited. Biological activity of scaffolds, including Live-dead and Cell adhesion, antibacterial, in-vivo, and immunohistochemistry assays, demonstrated desirable fibroblast cell proliferation and adhesion, increased bacterial growth inhibition zone, accelerated wound closure and improved expression of anti-inflammatory cytokines in Alg-Gel 10 % scaffolds. The findings of this study confirm that Alg-Gel 10 % scaffolds promote full-thickness wound healing and could be considered a potential candidate for full-thickness wound treatment purposes.

Microenvironment with NIR-Controlled ROS and Mechanical Tensions for Manipulating Cell Activities in Wound Healing.

The extracellular matrix (ECM) orchestrates cell behavior and tissue regeneration by modulating biochemical and mechanical signals. Manipulating cell-material interactions is crucial for leveraging biomaterials to regulate cell functions. Yet, integrating multiple cues in a single material remains a challenge. Here, near-infrared (NIR)-controlled multifunctional hydrogel platforms, named PIC/CM@NPs, are introduced to dictate fibroblast behavior during wound healing by tuning the matrix oxidative stress and mechanical tensions. PIC/CM@NPs are prepared through cell adhesion-medicated assembly of collagen-like polyisocyanide (PIC) polymers and cell-membrane-coated conjugated polymer nanoparticles (CM@NPs), which closely mimic the fibrous structure and nonlinear mechanics of ECM. Upon NIR stimulation, PIC/CM@NPs composites enhance fibroblast cell proliferation, migration, cytokine production, and myofibroblast activation, crucial for wound closure. Moreover, they exhibit effective and toxin removal antibacterial properties, reducing inflammation. This multifunctional approach accelerates healing by 95%, highlighting the importance of integrating biochemical and biophysical cues in the biomaterial design for advanced tissue regeneration.

ANALYSIS OF TURMERIC (CURCUMA LONGA LINN) ESSENTIAL OIL FROM DIFFERENT GROWING LOCATIONS USING FTIR/GC-MS SPECTROSCOPY COUPLED TO CHEMOMETRICS AND ITS WOUND HEALING ACTIVITIES

Objective: This study aims to determine the wound-healing activity of turmeric essential oil (TEO) collected from seven growing locations in West Sumatra, classify it based on fingerprint patterns of IR spectra combined with chemometrics, and identify their metabolite profiling using GC-MS spectroscopy.
 Methods: Fresh turmeric rhizome was extracted by the hydrodistillation method. TEO classification was carried out by PCA (Principal Component Analysis), and PLS-DA (Partial Least Squares-Discriminant Analysis) was used for predicting characteristic functional groups and metabolites (VIP>1) in TEO. Wound healing activity was performed using in vitro fibroblast cell proliferation and migration assay. Data analysis was performed using one-way ANOVA with a 95% confidence level.
 Results: PCA analysis based FTIR spectra was able to determine highland and lowland-originated TEO. The metabolites responsible for TEO classification were α-Phellandrene and D-limonene. The result showed that TEO originating from both lowlands and highlands enhanced fibroblast cell proliferation and fibroblast cell migration.
 Conclusion: The combination of IR spectral fingerprint patterns and chemometric analysis could classify TEO based on the height location of growth. The results showed that the altitude of the growing location had no significant effect on the wound-healing activity of TEO from West Sumatra (p>0.05).

Experimental Study on Rapid Hemostasis Using Peptide Hydrogels.

Uncontrolled hemorrhaging resulting from trauma, surgery, and disease-associated or drug-induced blood disorders can cause significant morbidities and mortalities in civilian and military populations. Self-assembling peptide nanofibers are particularly attractive due to their rapid and efficient hemostasis, biocompatibility, and wound-healing properties. In this study, we designed two types of 12-residue peptides by using a strong fishnet-like peptide sequence and a pro-cell adhesion sequence (Arg-Gly-Asp, RGD). The peptides are HN2-X-Ser-Phe-Cys-Phe-Lys-Phe-Glu-X-Arg-Gly-Asp-OH (where X is Pro or Tyr), which dissolve in deionized (DI) water and form stable and transparent functional hydrogels. Transmission electron microscopy and scanning electron microscopy demonstrated that the two peptides self-assemble into nanowebs and nanofibers, forming a fishnet-like and three-dimensional network structure. Circular dichroism and Fourier transform infrared spectroscopy analysis demonstrated that the self-assembled peptides mainly adopt a β-sheet structure with β-turn and α-helix as auxiliary assembly growth. 3-(4,5-Dimethylthiazol-2-yl)-2,5-diphenyltetrazolium bromide assay and SEM analysis showed that the cell survival rates were very good, delivering an obvious promotion of cell proliferation of fibroblasts and hepatocytes. Importantly, in vivo hemostasis delivered that the self-assembled peptide nanowebs and nanofibers had a good hemostatic effect on rat saphenous vein and liver bleeding, achieving 38 s faster hemostasis, which was better than commercial "Instantaneous" hemostatic powder. Accoupling the fast hemostasis and effective promotion of liver defect rapid repair, the peptide self-assembly strategy offers a clinically promising treatment option for life-threatening liver bleeding and serves as a renewed impetus for the development of peptide hydrogels as effective hemostatic agents.

Electrospun statin‐loaded nanofibers for treating diabetic wounds

AbstractThis study aims to develop, characterize, and evaluate the best statin‐loaded Collagen Silver nanoparticle‐coated polycaprolactone nanofibers by electrospinning technique. The characterization and evaluation results reveal that nanofibers had shown an aligned Collagen Silver nanoparticle‐coated polycaprolactone nanofibers distribution of fibers and aliment of collagen and silver nanoparticle coating material on the surface of the nanofibers. Furthermore, the electrospun nanofibers have shown no interaction between the drug and collagen and PCL polymeric material and have demonstrated controlled drug release for 360 h and significant degradation for 60 days of the study. In vitro, among the nanofiber treatment groups and the control groups, Pravastatin Collagen Silver nanoparticle‐coated polycaprolactone nanofibers have shown cell proliferation and migration of NHDF cells and blood vessel development in the CAM assay and potential anti‐bacterial activity against S. aureus and E. coli. In vivo, the Pravastatin Collagen Silver nanoparticle‐coated polycaprolactone nanofibers have demonstrated improved wound recovery, re‐epithelization, fibroblast cell proliferation, angiogenesis, and ECM remodeling and enhanced VEGF‐sprouting in the excised tissues of streptozotocin‐induced diabetic rats for 7, 14, and 21 days of the study. Therefore, the developed Pravastatin Collagen Silver nanoparticle‐coated polycaprolactone nanofibers could be a promising wound‐dressing platform for effectively treating and managing diabetic wounds.Highlights Nanofiber wound dressings provide numerous structural features in biomaterials. Polycaprolactone can release the repurposed statin molecules into the wound site in a controlled manner. In diabetic wounds, ECM tissue remodeling stimulates repair and vessel growth. Pravastatin has been demonstrated to improve angiogenesis and ECM secretion for wound healing in diabetic conditions.

Electrospun Nanofibers Encapsulated with Natural Products: A Novel Strategy to Counteract Skin Aging.

The skin is the primary tissue affected by wounds and aging, significantly impacting its protective function. Natural products are widely used in cosmetics, representing a new approach to preventing age-related damage. Nanomedicine combines nanotechnology and traditional treatments to create innovative drugs. The main targets of nanotechnological approaches are wound healing, regeneration, and rejuvenation of skin tissue. The skin barrier is not easily permeable, and the creation of modern nanodevices is a way to improve the passive penetration of substances. In this study, Helichrysum italicum oil (HO) was combined with different types of electrospun nanofibers to study their protective activity on the skin and to evaluate their future application for topical treatments. In the present research, we used biodegradable polymers, including polyvinyl alcohol (PVA) and polyvinylpyrrolidone (PVP), which were characterized by a scanning electron microscope (SEM). All results show a positive trend in cell proliferation and viability of human skin stem cells (SSCs) and BJ fibroblasts pre-treated with combined nanofibers and then exposed to UV stress. Gene expression analysis revealed the activation of a molecular rejuvenation program in SSCs treated with functionalized nanofibers before UV exposure. Understanding the mechanisms involved in skin changes during aging allows for the future application of nanomaterials combined with HO directly to the patients.

The Effects In Vitro of Photobiomodulation Over Fibroblasts and Extracellular Matrix.

Objective: The objective of this study is to evaluate the potential effects of photobiomodulation (PBM) on cell proliferation and extracellular matrix production of human fibroblasts (FN1) cultured in 2D. Background: Patients with healing difficulties suffer injuries that take time to recover. In addition, aging can be seen in our faces daily when we look in the mirror; in both situations, collagen production is reduced. Fibroblasts act in the beginning and at the end of the inflammation phase, signaling to immune agents, and platelets, and producing collagen, coordinating repair. PBM increases cell viability, proliferation, and mRNA production. Methods: Human fibroblasts were irradiated three times after cell seed (after 24, 48, and 72 h) using a gallium-aluminum arsenideGaAlAs low-level laser (LLL). Cell viability, proliferative response, synthesis of collagen types I and III, and soluble collagen production were analyzed. The statistical significance of differences between groups was determined using unpaired one-way analysis of variance (ANOVA) p < 0.05. Results: PBM increased significantly the number of fibroblasts, and the production of collagen types I (Col I) and III (Col III), after three sessions of LLL with 2.5 J per session, every 24 h, for 3 consecutive days; total energy delivered after 72 h is 7.5 J. Conclusions: This energy density of LLL increases fibroblast proliferation and collagen production in vitro without side effects.

Three-Dimensional Extrusion Printed Urinary Specific Grafts: Mechanistic Insights into Buildability and Biophysical Properties.

The compositional formulations and the optimization of process parameters to fabricate hydrogel scaffolds with urological tissue-mimicking biophysical properties are not yet extensively explored, including a comprehensive assessment of a spectrum of properties, such as mechanical strength, viscoelasticity, antimicrobial property, and cytocompatibility. While addressing this aspect, the present work provides mechanistic insights into process science, to produce shape-fidelity compliant alginate-based biomaterial ink blended with gelatin and synthetic nanocellulose. The composition-dependent pseudoplasticity, viscoelasticity, thixotropy, and gel stability over a longer duration in physiological context have been rationalized in terms of intermolecular hydrogen bonding interactions among the biomaterial ink constituents. By varying the hybrid hydrogel ink composition within a narrow compositional window, the resulting hydrogel closely mimics the natural urological tissue-like properties, including tensile stretchability, compressive strength, and biophysical properties. Based on the printability assessment using a critical analysis of gel strength, we have established the buildability of the acellular hydrogel ink and have been successful in fabricating shape-fidelity compliant urological patches or hollow cylindrical grafts using 3D extrusion printing. Importantly, the new hydrogel formulations with good hydrophilicity, support fibroblast cell proliferation and inhibit the growth of Gram-negative E. coli bacteria. These attributes were rationalized in terms of nanocellulose-induced physicochemical changes on the scaffold surface. Taken together, the present study uncovers the process-science-based understanding of the 3D extrudability of the newly formulated alginate-gelatin-nanocellulose-based hydrogels with urological tissue-specific biophysical, cytocompatibility, and antibacterial properties.

A Hybrid Electrospun-Extruded Polydioxanone Suture for Tendon Tissue Regeneration.

Many surgical tendon repairs fail despite advances in surgical materials and techniques. Tendon repair failure can be partially attributed to the tendon's poor intrinsic healing capacity and the repurposing of sutures from other clinical applications. Electrospun materials show promise as a biological scaffold to support endogenous tendon repair, but their relatively low tensile strength has limited their clinical translation. It is hypothesized that combining electrospun fibers with a material with increased tensile strength may improve the suture's mechanical properties while retaining biophysical cues necessary to encourage cell-mediated repair. This article describes the production of a hybrid electrospun-extruded suture with a sheath of submicron electrospun fibers and a core of melt-extruded fibers. The porosity and tensile strength of this hybrid suture is compared with an electrospun-only braided suture and clinically used sutures Vicryl and polydioxanone (PDS). Bioactivity is assessed by measuring the adsorbed serum proteins on electrospun and melt-extruded filaments using mass spectrometry. Human hamstring tendon fibroblast attachment and proliferation were quantified and compared between the hybrid and control sutures. Combining an electrospun sheath with melt-extruded cores created a hybrid braid with increased tensile strength (70.1 ± 0.3N) compared with an electrospun only suture (12.9 ± 1 N, p < 0.0001). The hybrid suture had a similar force at break to clinical sutures, but lower stiffness and stress. The Young's modulus was 772.6 ± 32 MPa for the hybrid suture, 1693.0 ± 69 MPa for PDS, and 3838.0 ± 132 MPa for Vicryl, p < 0.0001. Hybrid sutures had lower overall porosity than electrospun-only sutures (40 ± 4% and 60 ± 7%, respectively, p = 0.0018) but had a significantly larger overall porosity and average pore diameter compared with surgical sutures. There were similar clusters of adsorbed proteins on electrospun and melt-extruded filaments, which were distinct from PDS. Tendon fibroblast attachment and cell proliferation on hybrid and electrospun sutures were significantly higher than on clinical sutures. This study demonstrated that a bioactive suture with increased tensile strength and lower stiffness could be produced by adding a core of 10 μm melt-extruded fibers to a sheath of electrospun fibers. In contrast to currently used sutures, the hybrid sutures promoted a bioactive response: serum proteins adsorbed, and fibroblasts attached, survived, grew along the sutures, and adopted appropriate morphologies.

Banana fibre-chitosan-guar gum composite as an alternative wound healing material

Bio-composites, which can be obtained from the renewable natural resources, are fascinating material for use as sustainable biomaterials with essential properties like biodegradable, bio-compatibility as well cyto-compatibility etc. These properties are useful for bio-medical including wound healing applications. In this study, fibre obtained banana pseudo stem of banana plant, which is otherwise wasted, was used as a material along with chitosan and guar gum to fabricate a banana fibre-biopolymer composite patch. The physiochemical properties of the patches were examined using Fourier Transformed Infra-red spectrophotometer (FT-IR), tensile tester, Scanning Electron Microscope (SEM), contact angle tester, swelling and degradation studies. We further demonstrated that a herbal drug, Nirgundi could be loaded to the patch showed controlled its release at different pHs. The patch had good antibacterial property and supported proliferation of mouse fibroblast cells. The study thus indicates that banana fibre-chitosan-guar gum composite can be developed into an alternative wound healing material.

Formulation of novel bioactive gelatin inspired by cinnamaldehyde for combating multi-drug resistant bacteria: Characterization, molecular docking, pharmacokinetic analyses, and in vitro assessments

This study set out to formulate antibacterial and antioxidant gelatin boosted by cinnamaldehyde for combating multi-drug resistant bacteria previously obtained from chronic wounds. Towards this end, gelatin amine groups were conjugated with carbonyl groups of cinnamaldehyde, producing cinnamyl-gelatin Schiff bases. The physicochemical attributes of cinnamyl-gelatin Schiff bases were probed concerning alterations in chemical structures and microstructures compared to native gelatin. Besides, cinnamyl-gelatin Schiff bases exhibited higher thermal stability than gelatin, with a diminishing in solubility due to increases in hydrophobicity features. Interestingly, cinnamyl-gelatin derivatives exerted antibacterial activities versus multi-drug resistant Gram-negative and Gram-positive bacteria, showing maximum growth inhibition at the highest concentration of cinnamaldehyde incorporated into gelatin. The scavenging activities of gelatin against DPPH and ABTS•+ were promoted in cinnamyl-gelatin derivatives from 11.93 ± 0.6 % to 49.9 ± 2.5 % and 12.54 ± 0.63 % to 49.9 ± 3.12 %, respectively. Remarkably, cinnamyl-gelatin derivatives induced the proliferation of fibroblast cells, implying their prospective applications in tissue engineering. Molecular docking and pharmacokinetic investigations disclosed the potential antibacterial mechanisms of cinnamyl-gelatin derivatives alongside their biopharmaceutical applications. Altogether, these findings suggest that cinnamyl-gelatin derivatives could be utilized to tailor antibacterial-free antibiotics and antioxidant wound dressings against virulent bacteria to promote chronic wound recovery.

Optimization of a Photobiomodulation Protocol to Improve the Cell Viability, Proliferation and Protein Expression in Osteoblasts and Periodontal Ligament Fibroblasts for Accelerated Orthodontic Treatment.

Numerous pieces of evidence have supported the therapeutic potential of photobiomodulation (PBM) to modulate bone remodeling on mechanically stimulated teeth, proving PBM's ability to be used as a coadjuvant treatment to accelerate orthodontic tooth movement (OTM). However, there are still uncertainty and discourse around the optimal PBM protocols, which hampers its optimal and consolidated clinical applicability. Given the differential expression and metabolic patterns exhibited in the tension and compression sides of orthodontically stressed teeth, it is plausible that different types of irradiation may be applied to each side of the teeth. In this sense, this study aimed to design and implement an optimization protocol to find the most appropriate PBM parameters to stimulate specific bone turnover processes. To this end, three levels of wavelength (655, 810 and 940 nm), two power densities (5 and 10 mW/cm2) and two regimens of single and multiple sessions within three consecutive days were tested. The biological response of osteoblasts and periodontal ligament (PDL) fibroblasts was addressed by monitoring the PBM's impact on the cellular metabolic activity, as well as on key bone remodeling mediators, including alkaline phosphatase (ALP), osteoprotegerin (OPG) and receptor activator of nuclear factor κ-B ligand (RANK-L), each day. The results suggest that daily irradiation of 655 nm delivered at 10 mW/cm2, as well as 810 and 940 nm light at 5 mW/cm2, lead to an increase in ALP and OPG, potentiating bone formation. In addition, irradiation of 810 nm at 5 mW/cm2 delivered for two consecutive days and suspended by the third day promotes a downregulation of OPG expression and a slight non-significant increase in RANK-L expression, being suitable to stimulate bone resorption. Future studies in animal models may clarify the impact of PBM on bone formation and resorption mediators for longer periods and address the possibility of testing different stimulation periodicities. The present in vitro study offers valuable insights into the effectiveness of specific PBM protocols to promote osteogenic and osteoclastogenesis responses and therefore its potential to stimulate bone formation on the tension side and bone resorption on the compression side of orthodontically stressed teeth.

Soybean Oil-Based 3D Printed Mesh Designed for Guided Bone Regeneration (GBR) in Oral Surgery.

This study aims to obtain a cyto-compatible 3D printable bio-resin for the manufacturing of meshes designed from acquired real patients' bone defect to be used in future for guided bone regeneration (GBR), achieving the goal of personalized medicine, decreasing surgical, recovery time, and patient discomfort. To this purpose, a biobased, biocompatible, and photo-curable resin made of acrylated epoxidized soybean oil (AESO) diluted with soybean oil (SO) is developed and 3D printed using a commercial digital light processing (DLP) 3D printer. 3D printed samples show good thermal properties, allowing for thermally-based sterilization process and mechanical properties typical of crosslinked natural oils (i.e., E = 12MPa, UTS = 1.5MPa), suitable for the GBR application in the oral surgery. The AESO-SO bio-resin proves to be cytocompatible, allowing for fibroblast cells proliferation (viability at 72h > 97%), without inducing severe inflammatory response when co-cultured with macrophages, as demonstrated by cytokine antibody arrays, that is anyway resolved in the first 24 h. Moreover, accelerated degradation tests prove that the bio-resin is biodegradable in hydrolytic environments.

In Vitro Properties of Electrospun Composite Fibers Containing Boric Acid and Enhanced with Epidermal Growth Factor for Wound Dressing Applications

The requirements of the wound microenvironment, involving pH regulation, mechanical compatibility with skin, and prevention of bacterial attachment, highlight crucial considerations for advanced wound dressings. This study focused on electrospinning of poly(L-lactide-co-ε-caprolactone) (PLCL) enriched with 3–5% boric acid particles. The fibers were also supplemented with epidermal growth factor (EGF) prior to in vitro cell culture experiments. The results revealed that the fibers, with micro-to-nano thickness, displayed unique morphologies as boric acid particles interacted with the PLCL. Boric acid-containing fibers showed lower swelling rates compared to pure PLCL fibers that achieved a swelling rate of 151 ± 10.3%. Nevertheless, they maintained slightly acidic conditions and adequate oxygen conductivity in vitro. The water vapor transmission rate (WVTR) of fibers produced using a 5% boric acid-added PLCL was measured at 557 ± 20.9 g/m2day at 24 h, demonstrating competitive performance with commercial products. The incorporation of 5% boric acid in PLCL fibers significantly improved their maximum tensile stress, reaching 11.31 ± 0.82 MPa, as opposed to pure PLCL, which attained 6.92 ± 2.08 MPa. The Young's modulus values were determined as 190.53 ± 64.80 MPa for pure PLCL and 224.74 ± 91.66 MPa for PLCL containing 5% boric acid. In vitro fibroblast cell (3T3) proliferation on all fiber types did not show a significant difference compared to control. Fluorescent microscopy displayed a good adhesion and spread of cells on boric acid containing fibers. The addition of boric acid drastically reduced the attachment of Escherichia coli. The findings demonstrated the promising potential of electrospun PLCL fibers with incorporated boric acid as wound dressings.

Polyphenols, Antioxidants, and Wound Healing of Lecythis pisonis Seed Coats.

To better use the Lecythis pisonis Cambess. biomass, this study investigates whether Sapucaia seed coats present wound healing properties. We analyzed the antibacterial, antioxidant, and wound healing-promoting potentials, plus cytotoxicity and stimulation of vascular endothelial growth factor-A. The chemical composition was analyzed by positive ion mode electrospray ionization Fourier transform ion cyclotron resonance mass spectrometry. A total of 19 compounds were identified, such as proanthocyanidin A1, procyanidins A1, B2, and C1, epigallocatechin, and kaempferol (p-coumaroyl) glycoside. Potent antioxidant strength/index was verified for 2,2-diphenyl-1-picrylhydrazyl radical (IC50 = 0.99 µg/mL) and ferric reducing antioxidant power (IC50 = 1.09 µg/mL). The extract did not present cytotoxicity and promoted significant cell migration and/or proliferation of fibroblasts (p < 0.05). Vascular endothelial growth factor-A was stimulated dose-dependently at 6 µg/mL (167.13 ± 8.30 pg/mL), 12.5 µg/mL (210.3 ± 14.2 pg/mL), and 25 µg/mL (411.6 ± 29.4 pg/mL). Platelet-derived growth factor (PDGF) (0.002 µg/mL) was stimulated at 215.98 pg/mL. Staphylococcus aureus was susceptible to the extract, with a minimum inhibitory concentration of 31.25 µg/mL. The identified compounds benefit the antioxidant activity, promoting hemostasis for the wound healing process, indicating that this extract has the potential for use in dermatological cosmetics.

Nitric oxide releasing novel amino acid-derived polymeric nanotherapeutic with anti-inflammatory properties for rapid wound tissue regeneration.

Endogenous gasotransmitter nitric oxide (NO) is a central signalling molecule that modulates wound healing by maintaining homeostasis, collagen formation, wound contraction, anti-microbial action and accelerating tissue regeneration. The optimum delivery of NO using nanoparticles (NPs) is clinically challenging; hence, it is drawing significant attention in wound healing. Herein, a novel polymeric nanoplatform loaded with sodium nitroprusside (SP) NPs was prepared and used for wound healing to obtain the sustained release of NO in therapeutic quantities. SP NPs-induced excellent proliferation (∼300%) of mouse fibroblast (L929) cells was observed. With an increase in the SP NPs dose at 200 μg mL-1 concentration, a 200% upsurge in proliferation was observed along with enhanced migration, and only 17.09 h were required to fill the 50% gap compared to 37.85 h required by the control group. Further, SP NPs showed an insignificant impact on the coagulation cascade, revealing safe wound-healing treatment when tested in isolated rat RBCs. Additionally, SP NPs exhibited excellent angiogenic activity at a 10 μg mL-1 dose. Moreover, the formulated SP nanoformulation is non-irritant, non-toxic, and does not produce any skin sensitivity reaction on the rat's skin. Further, an in vivo wound healing study revealed that within 11 days of treatment with SP nanoformulation, 99.2 ± 1.0% of the wound was closed, while in the control group, only 45.5 ± 3.8% was repaired. These results indicate that owing to sustained NO release, the SP NP and SP nanoformulations are paramount with enormous clinical potential for the regeneration of wound tissues.