Swelling Of Fibers Research Articles

Insight into the microplastics release from disposable face mask: Simulated environment and removal strategy

The fight against the COVID-19 epidemic significantly raises the global demand for personal protective equipment, especially disposable face masks (DFMs). The discarded DFMs may become a potential source of microplastics (MPs), which has attracted much attention. In this work, we identified the detailed source of MPs released from DFMs with laser direct infrared spectroscopy. Polypropylene (PP) and polyurethane (PU) accounted for 24.5% and 57.1% of released MPs, respectively. The melt-blown fabric was a dominant MPs source, however, previous studies underestimated the contribution of mask rope. The captured polyethylene terephthalate (PET), polyamide (PA), polyethylene (PE), and polystyrene (PS) in airborne only shared 18.4% of released MPs. To deepen the understanding of MPs release from medical mask into the aquatic environment, we investigated the effects of environmental factors on MPs release. Based on regression analysis, the effects of temperature, incubation time, and wearing time significantly affect the release of MPs. Besides, acidity, alkalinity, sodium chloride, and humic acid also contributed to the MPs release through corroding, swelling, or repulsion of fibers. Based on the exposure of medical mask to simulated environments, the number of released MPs followed the order: seawater > simulated gut-fluid > freshwater > pure water. Considering the risk of MPs released from DFMs to the environment, we innovatively established a novel flotation removal system combined with cocoamidopropyl betaine, achieving 86% removal efficiency of MPs in water. This work shed the light on the MPs release from DFMs and proposed a removal strategy for the control of MPs pollution.

Modified acid pretreatment to alter physicochemical properties of biomass for full cellulose/hemicellulose utilization

Acid pretreatment of biomass decomposed hemicelluloses but could not effectively remove lignin, which hindered biomass saccharification and carbohydrates utilization. In this work, 2-naphthol-7-sulfonate (NS) and sodium bisulfite (SUL) were simultaneously added to acid pretreatment, which was found to synergistically increase hydrolysis yield of cellulose from 47.9 % to 90.6 %. Based on in-depth investigations, strong linear correlations were observed between cellulose accessibility and lignin removal, fiber swelling, CrI/cellulose ratio, cellulose crystallite size, respectively, indicating that some physicochemical characteristics of cellulose played significant roles in improving cellulose hydrolysis yield. After enzymatic hydrolysis, 84 % carbohydrates could be liberated and recovered as fermentable sugars for subsequent utilization. Mass balance illustrated that for 100 kg raw biomass, 15.1 kg xylonic acid and 20.5 kg ethanol could be co-produced, indicating the efficient utilization of biomass carbohydrates.

Effect of Hygrothermal Ageing on the Mechanical and Fire Properties of a Flame Retardant Flax Fiber/Epoxy Composite.

In engineering applications, natural fiber composites must comply with fire requirements including the use of flame retardant. Furthermore, biocomposites are known to be water sensitive. Whether flame retardants affect the water sensitivity and whether water absorption affects the fire behavior and the mechanical performance of biocomposites are the two main topics addressed in this work. In this study, a flax fiber/epoxy composite flame retardant with 9,10-dihydro-9-oxa-10-phosphaphenanthrene-10-oxide (DOPO) or aluminum diethyl phosphinate (AlPi) was aged in humid atmosphere or by immersion in water. Water absorption kinetics revealed that DOPO induces an increase in equilibrium water content by approximately a factor of 2 due to its intrinsic hygroscopicity and/or its plasticizing effect on the epoxy matrix. In contrast, AlPi does not significantly change the water sensitivity of the biocomposite. Mechanical testing highlighted that, whatever the FR, the evolution of mechanical properties with ageing is governed by the moisture content. The drop of elastic modulus was attributed to a decrease in fiber rigidity due to plasticization, while the increase in tensile strength was assigned to an increase in fiber/matrix friction due to fiber swelling. As regards flame retardancy, only the highest water contents modified the fire behavior. For the AlPi containing biocomposite, the water release resulted in an increase by 50% of the time to ignition, while for the DOPO flame retardant biocomposite the water release was mainly postponed after ignition.

Fiber swelling to improve cycle performance of paper-based separator for lithium-ion batteries application

It is well established that paper-based separators display short-circuit risk in lithium-ion batteries due to their intrinsic micron-sized pores. In this research, we have adjusted pore structure of paper by fiber swelling in liquid electrolyte. Specifically, the paper-based separator is prepared by propionylated sisal fibers through a wet papermaking process. Scanning electron microscope (SEM) and multi-range X-ray nano-computed tomography (CT) images display strong swelling of modified fibers after electrolyte absorption, which can effectively decrease the pore size of separator. Due to the high electrolyte uptake (817 wt%), paper-based separator exhibits ionic conductivity of 2.93 mS cm−1. 7Li solid-state NMR spectroscopy and Gaussian simulation reveal that the formation of local high Li+ ion concentration in the separator and its low absorption energy with Li+ ion (62.2 kcal mol−1) is conducive to the ionic transportation. In particular, the assembled Li/separator/LiFePO4 cell displays wide electrochemical stability window (5.2 V) and excellent cycle performance (capacity retention of 96.6% after 100 cycles at 0.5 C) due to the reduced side reactions as well as enhanced electrolyte absorption and retention capacity by propionylation. Our proposed strategy will provide a novel perspective to design high-performance bio-based separators to boost the development of clean and sustainable energy economy.

Comparison of pre-treatments mediated by endoglucanase and TEMPO oxidation for eco-friendly low-cost energy production of cellulose nanofibrils.

Specific kinds of enzymes have been used as an eco-friendly pre-treatment for mechanical extraction of cellulose nanofibrils (CNFs) from vegetal pulps. Another well-established pre-treatment is the 2,2,6,6-tetramethylpiperidine 1-oxyl (TEMPO)-mediated oxidation, which has gained considerable attention. Pre-treatments assist in fiber swelling, facilitating mechanical fibrillation, and reducing energy consumption; however, some of these methods are extremely expensive. This work aimed to evaluate the influence of enzymatic pre-treatment with endoglucanase on the energy consumption during mechanical fibrillation of cellulose pulps. Bleached pulps from Eucalyptus sp. and Pinus sp. were pre-treated with endoglucanase enzyme compared to TEMPO-meditated oxidation. Average diameters of CNFs pre-treated with enzymes were close to that found for TEMPO-oxidized nanofibrils (TOCNFs). Results showed that enzymatic pre-treatment did not significantly modify the pulp chemical and morphological characteristics with efficient stabilization of the CNFs suspension at higher supernatant turbidity. Energy consumption of pulps treated with endoglucanase enzymes was lower than that shown by pulps treated with TEMPO, reaching up to 58% of energy savings. The enzyme studied in the pulp treatment showed high efficiency in reducing energy consumption during mechanical fibrillation and production of films with high mechanical quality, being an eco-friendly option for pulp treatment.

Learning from hair moisture sorption and hysteresis.

The process of moisture sorption and desorption by human hair was analysed for extracting hints on the hair structure. The isotherms of moisture sorption and desorption by hair were recorded for untreated and chemically treated (permed and bleached) hair. Data of swelling were also considered. By examining the swelling and moisture sorption of keratin fibres, it is possible to conclude that hysteresis is quite improbably caused by capillary condensation. The mobility of the protein chains and the strength of the bonds binding water molecules to the active sites inside the matrix are proposed as causes instead. The concept of "breaking symmetry", derived from moisture sorption- desorption data, and the method of evaluating this parameter, is proposed as a way of characterizing the chemical treatment of hair. The results show that bleaching produces a larger breaking of symmetry than perming, and this is suggested to be due to new hydrogen bonds, created as a result of the chemical treatment, replacing the original disulphide bonds, which are of different strength compared to the bonds of untreated hair. The quantitative sorption data matched well to the model of grains of matrix enveloped in layers of water molecules at increasing relative humidity, up to 100%. The analysis suggested that, aside from the glass transition event occurring at around 60%-70% relative humidity, there is another, less examined, transition occurring at around 30% relative humidity, assigned to the opening of the hair inner structure, and accommodation of more water molecules. Both transitions are reflected by corresponding changes in the fibre mechanical behaviour. The moisture sorption-desorption by hair was shown to not only allow a quantitative differentiation among various cosmetic treatments of the hair but to also provide valuable information on the structure of the fibre.

Xylanase increases the selectivity of the enzymatic hydrolysis with endoglucanase to produce cellulose nanocrystals with improved properties

Enzyme-mediated isolation of cellulose nanocrystals (CNCs) is a promising environment friendly method with expected lower capital and operating expenditures compared to traditional processes. However, it is still poorly understood. In this study, an endoxylanase was applied as accessory enzyme to assess its potential to increase the selectivity of an endoglucanase during cellulose hydrolysis to isolate CNCs with improved properties. Only combinations of the enzymes with xylanase activity equal to or higher than the endoglucanase activity resulted in CNCs with improved properties (i.e., crystallinity, thermostability, uniformity, suspension stability and aspect ratio). The beneficial effects of the accessory enzyme are related to its hydrolytic (xylan and cellulose hydrolysis) and non-hydrolytic action (swelling of cellulose fibers and fiber porosity) and on the ratio of the enzymes, which in turn allows to tailor the properties of the CNCs. In conclusion, compared to the traditional sulfuric acid hydrolysis method, accessory enzymes help to isolate cellulose nanomaterials with improved and customized (sizes, aspect ratio and morphology) properties that may allow for new applications.

Deteriorating dispersibility of flushable wet wipes during storage: Role of fibre swelling and ionic shielding

Wet wipes are everyday products with the purpose to be flushed down the toilet after usage and dispersed into single fibres and small fragments thereby. During wet storage, these wipes can deteriorate their dispersibility over time, characterized by the slosh box disintegration test, recently named dispersibility ageing. This effect in flushable wet wipes, usually made of long man-made cellulose fibres and short wood pulp fibres, can be reduced by using unbleached softwood kraft pulp as the short fibre component. The aim of this work is to analyse mechanisms that could contribute to dispersibility ageing. Therefore, we will discuss three mechanisms that are able to explain this effect, that occurs in cellulosic fabrics when stored in water. Swelling (1) is demonstrated to be a long-term effect, but altering swelling with pH and salt addition has no effect on dispersibility ageing, making it unlikely that swelling contributes to it. With ionic shielding (2) a mechanism has been introduced that could impact dispersibility ageing by cations leaching from the wood pulp, which was demonstrated for an unbleached softwood kraft pulp by conductivity measurements over wet storage time. These cations neutralize the negatively charged pulp fibre fibrils and restrict their possibility to entangle with each other, which could contribute to decreasing dispersibility ageing. We will discuss the mechanism of interdiffusion (3) in dispersibility ageing, although we were not able to find a method that quantifies the contribution of cellulosic polymer diffusion to the time-dependent deterioration in dispersibility.

A review of extraction methods and analytical techniques for styrene and its metabolites in biological matrices.

We reviewed the toxicokinetics of styrene to introduce reliable surrogates for the biological monitoring of styrene workers. We have also discussed the extraction techniques and analytical methods of styrene and its metabolites. Sample preparation is the main bottleneck of the analytical techniques for styrene and its metabolites. Although some microextraction methods have been developed to overcome such disadvantages, some still have limitations such as long extraction time, fiber swelling and breakage, and the cost and the limited lifetime of the fiber. Among all, microextraction by packed sorbents, coupled with HPLC with ultraviolet detection (MEPS-HPLC-UV), can be the method of choice for determining styrene metabolites. Few studies investigated unchanged styrene in breath samples. Chemical determination of styrene in exhaled breath provides new insights into organ toxicity in workers with inhalation exposures and can be considered a fascinating tool in risk assessment strategies. Taking blood samples is invasive and less accepted by workers. In contrast, breath analysis is the most attractive method for workers because breath samples are easy to collect and non-invasive, and sample collection does not require the transfer of workers to health facilities. Therefore, developing selective and sensitive methods for determining styrene in breath samples is recommended for future studies.

Morphofunctional reorganization of plantar aponeurosis in experimental modeling of fasciopathy by synthetic analogue of prostaglandin E1

Foundation. Chronic plantar fasciopathic pain syndrome is a pathology that significantly affects the quality of life of patients of all age categories. Insufficient knowledge of the etiological and pathogenetic factors in the development of fasciopathies explains the multiplicity, and sometimes inconsistency, of conservative and surgical treatment regimens. The choice of the optimal variant of therapeutic or surgical intervention may be associated with experimental modeling of fasciopathies and the study of the dynamics of the pathological process.The aim. To study the morphological changes in structures identical to the human plantar aponeurosis in experimental modeling of fasciopathy in animals.Research methods. The material for the study was fragments of the tendonaponeurotic complex of the foot of laboratory animals (control group: animals with the introduction of physiological sodium chloride solution (n = 12); main group: animals with the introduction of alprostadil (n = 12)). The methods of light microscopy (staining with alcian and toluidine blue, according to Van Gieson, Weigert – Van Gieson and Picro-Mallory) and morphometry were used.Results and discussion. As a result of the study, it was found that the four-fold administration of alprostadil had a significant effect on the structure of the dense fibrous connective tissue of the plantar foot of laboratory animals. The mechanisms of damage (edema, microhemorrhages, infiltration by lymphocytes, plasmocytes and leukocytes, dystrophy by the type of mucoid and fibrinoid swelling, delamination and rupture of collagen fibers), adaptation and regeneration (the appearance of a large number of activated fibrocytes, fibroblasts, microvessels, neoplasm of collagen fibers) were activated. All this together led to spatial focal histotopographic changes, consisting in an increase in the cellular composition of connective tissue structures against the background of a noticeable violation of their spatial orientation.Conclusion. Modeling of fasciopathy using alprostadil was accompanied by the appearance of mosaic reversible and irreversible heteromorphic and heterochronous changes in all connective tissue aponeurotic structures. Such histotopographic changes should be considered as one of the reasons for the clinical manifestations of plantar fasciopathies, causing functional insufficiency and explaining the clinical recurrent nature of the pathological process.

Morphometric parameters of the optic nerve in patients with symptomatic ophthalmohypertension and secondary glaucoma associated with endocrine ophthalmopathy

Objective. To analyze the morphometric parameters of the optic disc (OD) in patients with symptomatic ophthalmohypertension and secondary glaucoma associated with endocrine ophthalmopathy (EOP) according to the data of optical coherence tomography (OCT).Materials and methods. The morphometric parameters of OD and retinal nerve fiber layer (RNFL) thickness were assessed according to OCT data of 175 patients (350 eyes and orbits) with different forms and activity of EOP. 30 patients (60 eyes and orbits) were diagnosed with symptomatic ophthalmohypertension in active EOP stage. 30 patients (58 eyes and orbits) were diagnosed for the first time with secondary open-angle glaucoma associated with inactive EOP course. The control group comprised 30 somatically healthy individuals comparable in terms of age and sex without clinical EOP symptoms with normal ophthalmic tonus.Results. The patients with symptomatic ophthalmohypertension have revealed increased peripapillary RNFL thickness up to Me 95.5 [90; 101] μm (Mann-Whitney U=1107, p=0.0002), and increased neuro-retinal rim (NRR) area up to Me 1.65 [1.5; 1.9] mm² (Mann-Whitney test U=1425; p=0.04). The patients with secondary glaucoma associated with EOP have found a statistically significant decrease of the average RNFL thickness to Me 85[80;89] μm (by 8%) compared to the control group (Mann-Whitney U=553, p=0.00). The NRR area was statistically significantly reduced to Me 1.15 [1.0; 1.2] mm² (Mann-Whitney U=255.5; p=0.00).Conclusion. Patients with symptomatic ophthalmohypertension and active course of the processs detect signs of increased RNFL and NRR area thickness, which is related to retrobulbar fiber swelling and development of compressive ischemic optic neuropathy. Patients with secondary glaucoma are characterized by remodeling of OD parameters at the expense of decreased average peripapillary RNFL thickness, reduced NRR area and extended excavation, which is typical for glaucomatous optic neuropathy.

Anisotropic behaviors of moisture absorption and hygroscopic swelling of unidirectional flax fiber reinforced composites

This work aims to study the anisotropic moisture absorption characteristics of unidirectional flax fiber reinforced composites (FFRCs) and evaluate the variations of the internal stress caused by the hygroscopic deformation, which might lead to the deterioration of the mechanical properties of the composites. FFRCs were prepared using vacuum-assisted resin infusion molding (VARIM) technology. Moisture absorption tests were designed by sealing the designated surfaces with a polyurethane waterproof coating to keep the moisture absorption of FFRCs only in the desired directions. The deformation caused by moisture absorption in the width direction was also monitored. It confirms that the moisture absorption of FFRCs conformed to the 3D Fick's law, and the influence of moisture absorption in the width direction cannot be ignored, especially for the unidirectional transverse tensile test specimen (UTFRC). The hygroscopic deformation of the unidirectional FFRCs showed that the material expands perpendicular to the fiber direction but shrinks along the fiber direction. The modified 3D Fick’s law based on heat conduction equation was performed to reveal the mechanism of the above moisture absorption and hygroscopic deformation. According to the finite element inversion, it was found that the axial diffusion coefficient along flax fiber bundles was much larger than the transverse diffusion coefficient perpendicular to the fiber bundle direction due to the existence of the unique lumen structure inside flax fibers. In addition, the high internal stress caused by the mismatched swelling properties between the fiber and the matrix was the main reason for the damage of the FFRCs, especially at the interface, which may seriously affect the service life of the composites. The outcome of this study can be used to accurately analyze the hydro-elastic behaviors of plant fiber reinforced composites, which is a prerequisite for predicting the mechanical properties affected by moisture absorption.

Thermo-mechanical processing of fibre-rich blackcurrant pomace to modify techno-functional properties

Exploring the use of seedless blackcurrant pomace, a fibre-rich by-product of juice pressing, in foods is favourable due to its nutritional profile but also for economic and sustainability aspects. Current applications are limited to products in which rapid fibre swelling, high water solubility or low sedimentation is not essential. In this study, functional properties of seedless blackcurrant pomace were modified by thermo-mechanical treatments using extrusion cooking or micronization in a planetary ball mill. A full factorial design showed that low pomace moisture (11 g/100 g) had the highest impact on swelling capacity (+ 20.6%) and water solubility index (+ 23.2%), whereas variation in extrusion temperature exhibited only minor effects. After milling for 4 h, the median particle size was reduced by 98% to 4 µm and the specific surface area increased from 0.1 to 2.5 m2/mL. Swelling capacity was highest after this time with 7.6 mL/g pomace and, although the amount of extractable sugars was reduced, water solubility increased to 7.6 g/100 g. In contrast to extruded samples, the red colour of the pomace was intensified after milling. Both treatments appear as promising to extend the applicability of fruit by-products in foods, as micronized pomace may counteract sedimentation in liquids, whereas increased swelling capacity after extrusion may have stabilizing effects on yoghurt-like systems.

Mechanistic Understanding and Three‐Dimensional Tuning of Fluid Imbibition in Silica‐Coated Cotton Linter Paper Sheets

AbstractPaper‐based microfluidic devices are used in point of care diagnostic, sensor technology or lab‐on‐a‐chip devices. Although a number of studies has been reported, only relatively few paper‐based diagnostic tools are available on the market. A remaining challenge is the mechanistic understanding and precise design of capillary flow in paper. Here, silica coatings are applied to control paper wettability, fiber swelling, and thus fluid transport in all three dimensions of a paper sheet via a simple dip‐coating and post‐treatment process. By adjusting the three‐dimensional silica coating distribution, a three‐dimensional asymmetric wettability gradient within the paper sheet is obtained which controls the fluid distribution and imbibition. The correlation between silica coating amount and silica distribution with the resulting fluid behavior is systematically elaborated by analyzing the interaction between fiber and fluid as well as the fiber swelling by applying confocal microscopy. Three different silica‐amount dependent fluid distribution states are demonstrated. These new insights into the mechanism of fluid imbibition using simple silica coatings enable the specific design of different imbibition mechanisms and thus the adjustment of the microfluidic properties in paper‐based microfluidic devices with control over all three spatial dimensions of a paper sheet in one fabrication step.

Justification of an approach to cellulase application in enzymatic softening of linen fabrics and clothing

We propose the final softening finishing of textile products based on a complex of modifying effects on a highly ordered cellulose backbone of the secondary cell wall G-layer or on a mesh corset of microfibrillar cellulose in the primary cell wall. We suggest using polypeptide molecule sizes and the strength of polypeptide molecule adsorption binding on a model solid-phase substrate as parameters of the structurally regulated action of cellulase preparations. The article presents an analysis of 11 cellulase preparations as groups of weakly, tightly and medium adsorption enzymes, and also groups of volumetric, peripheral or combined activity manifested in the fiber structure. We show the regularities of enzyme property influence on the fiber pore structure development, changes in the parameters of the fabric bending stiffness and breaking load and technological shrinkage for two modification modes: liquid treatment with flax fiber swelling or low-modulus application solution. For the liquid method of treatment (with a bath module of at least 10) it is recommended to apply highly adsorbable cellulases ( A > 50%), in which the content of molecules with a globule size less than 30 nm does not exceed 15%. For the low-modulus method of treatment it is recommended to use enzymes with the adsorption capacity of at least 40% and a low content of small-sized fractions (no more than 25%). The recommended treatment variants ensure a three to four-fold bending stiffness decrease at the mechanical strength loss of not more than 15% and shrinkage of linen fabrics not more than 0.5%.

The effects of high alkali impregnation and oxygen delignification of softwood kraft pulps on the yield and mechanical properties

Abstract This study investigated whether the yield improvement after high alkali impregnation (HAI) is maintained after oxygen delignification and whether the potential of oxygen delignification to increase the mechanical properties is affected by high alkali impregnation. The yield improvement achieved by high alkali impregnation (1 %) was preserved after oxygen delignification, particularly of glucomannan. The total fiber charge and swelling increased after oxygen delignification regardless of the type of impregnation in the cooking step. The tensile index improvement obtained by oxygen delignification was retained if this was preceded by high alkali impregnation. The stiffness index was higher and elongation slightly lower after HAI impregnation than after a standard (REF) impregnation. Fibers obtained through high alkali impregnation seem to be slightly less deformed and slightly wider than fibers obtained after a standard impregnation.

Influence of Textile Structure on the Hygroscopic Behavior of Bamboo Textile-Reinforced Polymer

ABSTRACT Although bamboo fiber-reinforced polymer has been extensively studied, its utilization has been limited by its unfavorable performance. This study developed a non twisting bamboo textile-reinforced polymer (BTRP) through vacuum resin transfer molding and then used two weaving methods, different layers, different edge treatments, two stacking sequences, and two sizes as factors to investigate the effect of woven structures on the hygroscopic behavior of BTRP, such as water absorption, diffusion, dimensional stability, and moisture transportation. The differences in the results of long-term immersion and the swelling at different locations of BTRP were also examined. The results of this study indicate that the weaving method directly affected the water absorption from the fiber area and that the size of the specimens affected the saturation rate. The swelling behavior differed with the weaving method and number of layers, which indicates that rate of water ingress and transverse fiber swelling were the reasons that cause the different swelling behavior. This study found that moisture may be transferred differently through different parts of BTRP due to variations in fiber saturation. Moreover, the analysis of the center and periphery of BTRP specimens indicated that textile structure significantly affected water uptake and indirectly caused two moisture transport mechanisms.

Influence of water ageing on the mechanical properties of flax/PLA non-woven composites

Flax fibres are widely used in the automotive sector to reinforce polyolefins, such as for dashboard and interior door panels. A promising option is poly-(lactid) (PLA), as it leads to higher mechanical properties and offers an additional end-of-life scenario following recycling: industrial composting. However, like other composite systems such as flax/polyolefin, flax/PLA composites are also sensitive to water. Here, a non-woven flax/PLA composite is aged under several conditions (50% RH/75% RH/98% RH/Immersion) until saturation. After ageing, all samples are reconditioned at 50% RH, and their residual properties are assessed. The presence of a critical relative humidity between 75 and 98% is highlighted, above which, increases in moisture content irreversibly decrease the composite's mechanical properties. After ageing at 98% RH and in immersion, tangent modulus was reduced by 23.0 and 33.8% and ultimate strength by 26.7 and 37.4%, respectively, compared to reference materials. This decrease is mainly due to microstructure evolution in the form of increasing porosity. This microstructure evolution is induced by the swelling of flax fibres, which generates high local stresses, above what PLA can withstand. As a result, micro-cracks appear in the matrix, responsible for reduction in mechanical properties.

Xylan extraction strategies and the performance of the resulting high purity cellulose fiber to swelling and dissolution

In this study, we investigated the influence of hemicelluloses removal treatment on the reactivity of the resulting pulp. The idea was to develop treatment strategies consisting of mechanical refining (different refining technologies), chemical treatment (CCE), and xylanase treatment that enabled both quantitative xylan removal as well as good reactivity to dissolution without the need for additional post-extraction treatments (cellulose activation) to improve reactivity. Cellulose post-extraction treatments result in additional production costs. The reactivity of the extracted pulps was evaluated based on the degree of swelling in NaOH and dilute cupriethylene diamine solution (CUEN), the solubility in 8% NaOH at -10 °C, and the Fock reactivity. The result obtained showed that hemicelluloses removal strategies that included mechanical refining treatment led to better pulp reactivity than unrefined pulp. The best result was obtained with refined pulp extracted with 6% soda (cellulose II not detected). In addition, we obtained a Fock reactivity ranging from 60 to 70%. The good correlations found between fiber swelling, solubility in caustic soda, and Fock reactivity suggest that the tedious Fock test could be substituted by the much simpler swelling and solubility measurements. The negative impact of cellulose II on pulp reactivity is due to the higher number of hydrogen bonds formed under dewatering and drying. This problem would most likely be averted in the ideal case where pulp dissolution is integrated into the pulp mill.

Efficient Swelling and Mercerization of Bagasse Fiber by Freeze-Thaw-Assisted Alkali Treatment

The mercerization of fiber is an important method for the high-value utilization of cellulose. In this study, the bagasse fiber was mercerized by freeze–thaw-assisted alkali treatment (FT/AT). The effects of freezing temperature, freezing time, alkali concentration, and thawing temperature on cellulose and hemicellulose removal were studied. The optimal freezing temperature was −40°C, freezing time was 8.0 h, alkali concentration was 5.0%, and thawing temperature was 30°C. The highest removal rate of hemicellulose was 75.64%. It was 5.80% higher than that of alkali treatment (AT). The alkaline degradation of cellulose was inhibited. The penetration of alkaline solution to fiber was promoted by the assistance of freeze-thaw pretreatment. The effective alkali concentration (5.0%) of cellulose I completely transformed into cellulose II decreased by 66.67% compared with traditional alkaline mercerization (15.0%). The high-efficiency mercerization of fiber was achieved by FT/AT. It provides theoretical support for promoting the high-value utilization of lignocellulosic biomass.