Characteristics Of Fibers Research Articles

Effect of enhanced quenching on properties of melt spun multifilament poly[3-hydroxybutyrate] yarns

Bacterial poly-3-hydroxybutyrate is a thermoplastic biopolyester that is considered a potential alternative to traditional fossil-based plastics due to its rapid biodegradation performance in both soil and marine environments and its compostability. Due to problems in thermal and crystallization behaviors of the bacterial poly-3-hydroxybutyrate polymer, an improvement has been made in the cooling channel of the conventional fiber spinning process. Using an enhanced quench channel, named as a half tube on a conventional melt spinning line, melt spinning of the bacterial poly-3-hydroxybutyrate multifilament fibers is successfully carried out. The maximum crystallization temperature of polymers was taken into account while adjusting the quenching process. The study examined the impact of varying drawing ratios and the designed quenching apparatus on the thermal (differential scanning calorimetry), mechanical (tensile and drawing force tests), morphological, and crystal structure characteristics of fibers. The quenching apparatus has visibly created a homogeneous melt flow under the spinnerets. While it has a negative impact on fiber cross-sectional formation, raising the draw ratio greatly enhances mechanical properties.

Anatomical Characteristics and Assessment of Wood Fiber Quality of Mature Pedunculate Oak (Quercus robur L.) Trees Grown in Different Environmental Conditions

From productive and ecological point of view, Quercus robur L. is an extremely important species and the investigation of its anatomical properties is very significant in terms of its technical and technological utilization. The paper deals with the analysis of the wood fiber characteristics (fiber length, fiber lumen width, double-cell wall thickness, Runkel ratio) of mature pedunculate oak trees in the non-flooded (Management Unit "Vinična-Žeravinac-Puk") and flooded area (Management Unit "GVO 83 b"). One of the aims of the study is to determine the wood fiber quality and the possibility of use in paper and pulp production. When the mean values of the analysed anatomical characteristics are compared, the results show slightly higher values in the non-flooded area, except for the Runkel ratio. The radial pattern of the investigated characteristics depending on the age shows growth in the non-flooded area, while the same tendency in the flooded area was found for the fiber length only. It was recorded that fiber lumen width, double-cell wall thickness and Runkel ratio decreased in the final annual rings. The wood fiber quality for use in pulp and paper production is the greatest in the juvenile zone, unlike sapwood zone, regardless of the site conditions.

Improving dispersion of basalt fiber with polyethylene glycol and effect of coupling agent

ABSTRACT Basalt fibers were widely used as reinforcing matrix materials because of their thermal and chemical stability and environmental friendliness. The properties of composite materials were affected by the interaction between the basalt fibers and matrix materials. Surface modification of basalt fibers and the dispersion property have become key points of research in recent years. This study focuses on the impact of a dispersant on surface modification. Basalt fibers were dispersed by polyethylene glycol (PEG) before modification with 3-aminopropyltriethoxysilane (KH550), which significantly increased the surface roughness, thus increasing the surface area and facilitating mechanical bonding. The morphology, structure, and composition were characterized via scanning electron microscopy (SEM), Fourier transform infrared spectroscopy (FTIR), and X-ray photoelectron spectroscopy analysis (XPS), respectively. The distribution characteristics of fiber were evaluated by the response surface method. When the mass fraction of PEG was 0.5 wt.%, the modification time was 2.5 hours, and the modification temperature was 60°C, the fiber dispersion degree in KH550 solution reached 83%. The grafting degree test indicates that the weight of the grafting increased to 6.67 times that of the undispersed basalt fibers. This enhancement allowed for greater grafting of the KH550, thereby optimizing the effect of modified fibers.

Degradation characteristics of the pineapple leaf fibre reinforced green composite developed by injection moulding under different environmental conditions

The present study examines the mechanical and morphological characteristics of a green composite reinforced with pineapple leaf fiber (PLF) under different environmental conditions. PLF underwent chemical treatment at optimal conditions, using a 1% w/v sodium carbonate solution for 6 hours, to produce an environmentally friendly pineapple leaf fiber (PLF)/polylactic acid (PLA)-based composite via injection molding. The optimal injection settings of 165℃ (melting temperature), 50 mm/sec (injection speed), and 110 bars (injection pressure) to produce the PLF/PLA composite. The PLF/PLA composite was developed with a fiber loading of 20% and a length of 3 mm. The produced PLF/PLA composites were then exposed to a variety of environmental conditions, including water, soil, refrigeration, and room temperature. The impact of these diverse conditions on the mechanical properties (tensile, flexural, compression, and shear) was scientifically observed for four-week. Additionally, the morphology of the fractured specimens was assessed using a scanning electron microscope (SEM). The contact angle measurement was conducted to assess the hydrophilic characteristics of the PLF/PLA green composite. There has been a lack of comprehensive research on the effects of different environmental conditions on the mechanical, wettability, and morphological properties of green composites derived from PLF/PLA. Thus, in this study, emphasis is given for investigating the effect of various environmental conditions on the mechanical properties of PLF/PLA injection-molded green composite. The composite material demonstrated the highest water absorption and swelling thickness at 6.45% and 5.51%, respectively, in comparison to the dry PLF/PLA samples. The green composite of PLF/PLA demonstrated excellent mechanical performance under ambient conditions compared to other environmental conditions. The PLF/PLA composite displayed a peak contact angle of 83.26° when subjected to soil burial conditions. On the contrary, the initial samples of the PLF/PLA composite displayed the minimum contact angle of 56.72°.

Dynamic behaviors of nickel coated carbon nanotubes reinforced ultra-high performance cementitious composites under high strain rate impact loading

Understanding the dynamic mechanical behaviors of materials is a prerequisite for reliably analyzing and predicting the dynamic response of structures, which is of great significance for transportation infrastructure and military engineering subjected to extreme loads, particularly dynamic loads at high strain rates. Nickel coated multi-walled carbon nanotubes (Ni-MWCNTs) show promise as a reinforcement to modify the dynamic mechanical behaviors of ultra-high performance cementitious composites (UHPCC). Because Ni-MWCNTs combine the high tensile strength and large aspect ratio characteristics of fibers with the nano effect of nanomaterials, as well as have excellent dispersibility due to the nickel plating on the CNTs’ surface, they effectively improve the dynamic mechanical properties of UHPCC under impact loading at high strain rates of about 100 s−1/300 s−1/500 s−1 and reduce the brittle damage degree of composites. The maximal increase in dynamic compressive strength and energy absorption capacity of UHPCC reaches 47.9% and 68.2%, respectively. This enhancement effect arises from that Ni-MWCNTs improve the microstructure and form multiple fine cracks, resulting in an increased energy consumption required for crack formation, propagation and coalescence. Additionally, the dynamic mechanical properties of Ni-MWCNTs reinforced UHPCC exhibit noticeable strain rate effects. Consequently, a strain rate-dependent logarithmic functional dynamic increase factor model and dynamic constitutive model of UHPCC filled with Ni-MWCNTs are modified herein for predicting and modeling the dynamic mechanical behaviors of composites.

Experimental study of Yushania alpina bamboo fiber

The characteristics of bamboo fiber depend on the source species. This study investigated the properties of Yushania alpina bamboo fibers extracted using mechanical, chemical, and combined methods. Samples from each extraction method were tested for tensile strength. Scanning electron microscopy was used to examine the morphology of the fibers. Fourier transform infrared was used to trace functional group changes. The absorption capacity of the fibers was also examined. The thermal properties of the fibers were investigated using thermogravimetric analysis. The chemical compositions of the fibers were studied using a gravimetric method. In contrast to mechanically and combinedly extracted bamboo fibers, chemically extracted fiber had up to 90.84% and 67.06% increments in tensile strength, respectively. Scanning electron microscopy revealed the removal of attachments on the surfaces of the fibers extracted chemically. The diameter of the fibers extracted chemically was reduced. Fourier transform infrared showed no change in functional groups among the extracted fibers. However, lignin content was reduced in chemically extracted fibers. The absorption capacity of the fibers was encouraging for use in composites. Thermal analysis showed improved thermal properties with the chemical method. Chemical analysis revealed reduced lignin and hemicellulose compositions in chemically extracted fibers. This study suggests bamboo fibers can be used in the construction industry for sustainability.

Effect of Various Concentrations of Sodium Hydroxide/Hot Alkali Treatment on the Physical Properties of Ramie Fibres

The preparation stages that precede the final treatment with a chemical treatment like alkali determine the physical characteristics of ramie fibres. It modified the hydroxyl group which is responsible for the hydrogen bonding of the fibres. This work examined the pre-treatment of ramie fibres with acetone followed by alkali or hot alkali with various concentrations. The immersion of ramie fibres in certain percentages of sodium hydroxide solution resulted in a good performance of their physical characteristics. The ramie fibres treated with 10% NaOH exhibit the best dispersion stability and low agglomeration or precipitation in water with an amount of 14%. When alkali is applied to ramie fibres, the hydrophilic group on their surface grows, potentially improving the fibre's capacity to absorb water. However, when the concentration is increased to 15%, the dispersion stability of sodium hydroxide performs less well. The fibres' ability to absorb water was diminished and they became brittle due to a high alkali content. In addition to the aforementioned characteristics, the properties of precipitation and water absorption were unaffected by the hot alkaline process for all samples. The hot alkali process (80°C) was not able to generate a further breakdown of hydrogen bonds of the fibres.

Changes in meat quality and muscle fiber characteristics of beef striploin (M. longissimus lumborum) with different intramuscular fat contents following freeze-thawing

Adipose (fat) tissue has different physical properties from skeletal muscle tissue, and its moisture content is relatively low; thus, freezing or freeze-thawing of meat affects its quality. However, the effect of intramuscular fat (IMF) of meat has not been comprehensively studied. The changes in the meat quality and muscle fiber characteristics of beef striploin (M. longissimus lumborum; LL) with different IMF contents (63.5 g/kg‒260.3 g/kg; n = 52) following freeze-thawing were examined. Freeze-thawing destroyed muscle fibers, and the fiber size was decreased irrespective of muscle fiber type or IMF content. However, the size of type I and IIA muscle fibers was largely altered in LL muscles with lower IMF content. Low IMF content increased the tenderness and decreased the pH of LL muscles; the effects of low IMF content on discoloration in LL muscles were less prominent. Larger IMF particles and higher density were associated with reduced thawing loss in LL muscles. IMF content reduced the lightness of frozen-thawed meat, but it did not excessively reduce water-holding capacity and pH. Thus, deterioration in meat quality can be prevented by considering the IMF content during the freezing process.

IMAGE PROCESSING APPROACH FOR FOREIGN MATERIAL DETECTION IN COTTON BUNDLE

The image processing philosophy is mainly determined by the complexity of the image and provides the necessary information to be derived from the image. In the textile industry, the image processing technique focuses on the determination of the geometric properties of the fibers such as cross-sectional shape, diameter, length, fineness, and curl while the studies on the yarn characteristics mostly focus on the determination of yarn hairiness, yarn unevenness and yarn defects (thick place, thin place and neps). In this study, previous studies about image processing approaches that are applied for fiber characteristics were investigated. A case study was conducted to automatically determine the visible foreign matter in the waste cotton bundle that can be used for recycled cotton yarn production. It was revealed that the image processing methods can be successfully applied for foreign fiber and matter detection in cotton bundle. As a result, it is emphasized that the waste cotton properties can be specified with a sensitive and accurate approach via image processing technique, objective and numerical determination can be obtained instead of visual evaluation based on experience.

Physicomechanical, water absorption and thermal properties and morphology of Paederia foetida fiber–Al2O3 powder hybrid‐reinforced epoxy composites

AbstractHybridization of natural fibers with ceramic materials for reinforcing composites allows the optimization of the properties of these materials. For this reason, the present study aims to investigate physical, mechanical, water absorption, swelling and thermal properties as well as morphological characteristics of a hybrid Paederia foetida fibers–alumina powder (PFs–Al2O3)‐reinforced epoxy composite. Epoxy resin served as the matrix, while PFs and Al2O3 were employed as reinforcement. Five types of composites were fabricated using the hot‐pressing technique. The corresponding ratios of PFs:Al2O3 volume fractions (%) considered here were 0:40 (SFA), 10:30 (SFB), 20:20 (SFC), 30:10 (SFD) and 40:0 (SFE). The results reveal that the density of the hybrid PFs–Al2O3 composites decreased for increasing volume fractions of PFs: from 2.173 g cm−3 of SFA to 1.042 g cm−3 of SFE. The highest values of tensile strength (i.e. 49.085 MPa), tensile elastic modulus (i.e. 1.431 GPa) and impact strength (24 kJ m−2) were obtained for the SFD composite material with 30% volume fraction of PFs and 10% volume fraction of Al2O3: this happened because interface bonds between PFs, Al2O3 and epoxy phases achieved their optimal configuration. Overall, mechanical properties of the hybrid PFs–Al2O3‐reinforced epoxy composites were superior to those of composites reinforced only by PF fibers or only by Al2O3. Water absorption and swellability reached their maximum values at the steady state occurring after tested samples remained immersed in water for 820 h. The SFE composite reinforced only by PFs presented the highest water absorption and swelling (i.e. 6.034% and 5.81%, respectively) while for all other hybrid composites (SFD, SFC and SFB) these two quantities remained below 5%. Density and volume fraction of voids of hybrid PFs–Al2O3‐reinforced composites were consistent with the corresponding properties of the composites reinforced only by Al2O3 or PFs. SFD was also the most thermally stable material. Scanning electron microscopy observations of fractured surfaces indicated that the microstructure of the PFs–Al2O3‐reinforced epoxy composites presents several voids, fiber pullouts and transverse fibers, which together optimize the mechanical response of the composite material. Remarkably, the SFD composite material was highly competitive with the most recently developed hybrid composites employing natural reinforcements. © 2024 Society of Industrial Chemistry.

Battling arid adversity: unveiling the resilience of cotton in the face of drought and innovative mitigation approaches

Climate change has had significant impacts on agriculture, particularly on cotton production, where drought has emerged as a major threat worldwide. Long and intense dry periods in cotton-growing regions have become more frequent and severe. Drought stress severely affects various aspects of cotton plants, including chlorophyll pigments, carbohydrate metabolism, and enzyme activities related to fiber development, such as vacuolar invertase and sucrose synthase. Furthermore, drought stress disrupts the movement of nutrients toward the reproductive tissues in cotton, resulting in compromised pollen function, propagative failure, and fiber characteristics. To tackle these issues, scientists have made advancements in creating drought-resistant cotton varieties through transgenic methods or molecular breeding techniques, genome editing, CRISPR/Cas9, utilizing quantitative trait loci (QTL). Moreover, the application of plant growth regulators and mineral elements has displayed the potential to improve cotton’s ability to endure drought stress while also enhancing fiber yield and quality. These approaches activate stress-responsive signaling pathways, which could contribute to mitigating reproductive failure and improving fiber characteristics. While the impact of drought stress on cotton plants has been extensively studied, the variations in fiber quality resulting from drought stress are not yet completely understood. Current research has been focused on unraveling the mechanisms underlying these changes, including the physiological, biochemical, and molecular alterations during the multiplicative growth phase that contribute to poor fiber development. Understanding these mechanisms will facilitate the development of novel strategies to alleviate the adverse impact of worldwide weather changes on cotton growth and fiber quality. This research focuses on the drought stress in cotton cultivation and explores its different effects on cotton morphology, physiology, crop yield, and fiber characteristics as well as mechanisms by which cotton exhibits drought tolerance and highlights innovative strategies to mitigate drought stress.

The influence of the mass transport regime on laser chemical vapor deposited carbon fibers

Laser Chemical Vapor Deposition (LCVD) is a process through which fibers are additively deposited by the dissociation and deposition of a precursor gas into the solid phase under a translating laser focal point. In the hyperbaric pressure conditions, LCVD has two identified reaction regimes. The first being limited by surface reaction kinetics (SRK) and the second being limited by mass transport (MT). This article examines the effects of mass transport (MT) limitations on carbon fiber growth using either ethane (C2H6) or ethylene (C2H4). Both hydrocarbon precursors reveal a growth rate reduction when transitioning from SRK-to-MT to meet the no-slip condition in fluid dynamics. This transition correlates to a fiber microstructure change from a core shell morphology with a graphitic structure (SRK) to a nodular morphology with an amorphous structure (MT). The fiber fracture stress is generally found to be higher in the MT than SRK regime because of the reduction of easily cleaved graphitic planes in the MT fibers. Collectively, these results demonstrate the importance of the MT limited growth regime and how fiber characteristics can be manipulated when grown in this regime.

Influence of multi‐walled carbon nanotubes on mechanical characteristics of glass fiber reinforced polymer composites: An experimental and analytical approach

AbstractAs a consequence of their magnificent performance like mechanical, electrical and chemical properties, multiwalled carbon nanotubes (MWCNTs) are widely used as a secondary reinforcement in composite field. It has been developed by arc discharging process under atmospheric pressure. Subsequently, MWCNTs doped nano‐composite were developed through hand lay‐up and followed by vacuum bagging techniques. Quasi – isotropic symmetrical laminate of eight layers (0/90)/(±45)/(±45)/(0/90)//(0/90)/(±45)/(±45)/(0/90) were fabricated under room temperature. To fabricate the composite laminates, purified MWCNTs were homogeneously dispersed in glass fiber reinforced epoxy with 0.5%, 1.25%, and 2 wt% loading. Tensile strength, tensile modulus, strain to failure and fracture behavior of unfilled and MWCNTs doped composite laminates were evaluated. Field emission scanning electron microscope (FE‐SEM) was employed to evaluate the structural and morphological characteristics of advanced nano‐composites. Reinforcement effect is found to be more pronounced in 1.25% MWCNTs embedded glass fiber reinforced polymer. This reinforcement effect was corroborated by tensile fractography which depicted by hackle region. Results indicated that tensile strength of 1.25 wt% nano‐composite increased by 47.36% with respect to 0.5 wt% MWCNT doped composites.Highlights Development of multi‐walled carbon nanotubes (MWCNTs) by arcing process. Fabrication of MWCNTs doped glass fiber reinforced polymer (GFRP) composites. Mechanical characterization of nano‐composites. Modeling of nano‐composites by Halpin‐Tsai equation. Fractrography of nano‐composites in details.

Artificial-Intelligence-Enhanced Analysis of In Vivo Confocal Microscopy in Corneal Diseases: A Review.

Artificial intelligence (AI) has seen significant progress in medical diagnostics, particularly in image and video analysis. This review focuses on the application of AI in analyzing in vivo confocal microscopy (IVCM) images for corneal diseases. The cornea, as an exposed and delicate part of the body, necessitates the precise diagnoses of various conditions. Convolutional neural networks (CNNs), a key component of deep learning, are a powerful tool for image data analysis. This review highlights AI applications in diagnosing keratitis, dry eye disease, and diabetic corneal neuropathy. It discusses the potential of AI in detecting infectious agents, analyzing corneal nerve morphology, and identifying the subtle changes in nerve fiber characteristics in diabetic corneal neuropathy. However, challenges still remain, including limited datasets, overfitting, low-quality images, and unrepresentative training datasets. This review explores augmentation techniques and the importance of feature engineering to address these challenges. Despite the progress made, challenges are still present, such as the "black-box" nature of AI models and the need for explainable AI (XAI). Expanding datasets, fostering collaborative efforts, and developing user-friendly AI tools are crucial for enhancing the acceptance and integration of AI into clinical practice.

Characteristics of sudanese camel-hair fibres under subtropical desert condition

The study assessed the quality and variability of camel hair fibres in arid regions of Egypt. Raw camel-hair samples were collected from fifteen Sudanese camels divided into seven males (414.60 ± 38.19 kg, BW) and eight females (401.67 ± 26.76 kg BW), and the study investigated the influences of animal sex on both the physical and chemical traits of camel-hair fibers. The relationships among physical properties and both mineral and amino acid content were studied. Camel’s sex had no significant effect on any of the studied traits including fibre diameter (FD), prickle factor (PF), medullated fibre (MF), staple length (SL) and staple strength (SS). In the meantime, no significant differences were found between males and females in fibers’ minerals contents except potassium, where fibres of females had significantly higher potassium content than those of males. For amino acids contents in camel fibres, camel sex had a significant effect only on glutamic acid, since fibres of males showed higher (P < 0.05) content than females. Fibre diameter had positive (P < 0.01) correlations with prickle factor (r = 0.83) and medullated fibres (r = 0.73). Zinc content in camel fibres was positively correlated with fibre diameter (r = 0.57; P < 0.05) and medullated fibres (r = 0.73; P < 0.01). Moreover, a significant (negative correlation coefficient P < 0.05) was found between fibre diameter and both sulfur and proline contents (r=-0.39 and − 0.56). Ammonia content in fibres was correlated negatively (P < 0.05) with prickle factor and elongation (r=-0.62 and − 0.58, respectively). The variability in the physical properties and chemical composition of Sudanese camel-hair fibers under subtropical desert conditions may shed light on the possibility of improving fiber quality.

Research on the Compression Performance and Damage Mechanism of Larix Wood With Smooth Grain

In order to investigate the compression performance and damage mechanism of fallen wood in the down-grain direction, northeast larix was taken as the research object. Through the monotonic compression test of 12 specimens, the deformation characteristics, damage mode, and stress-strain curve properties of larix wood under compression in the direction of the smooth grain were analyzed; scanning electron microscope technology was used to analyze the damage and fracture characteristics of wood fibers from the microscopic point of view to further reveal the damage mechanism of wood monotonic compression. The results showed that larix wood compressed in the paragons produced three damage modes of end collapse, shear damage and paragons splitting after the peak load, and the shear damage usually occurred at the junction of the early and late wood tubular cells due to the difference between the early and late wood tubular cells. On this basis, an isomorphic model was established to describe the compression of larix wood in the smooth grain.

A metasurface structure-assisted terahertz negative curvature fiber

Negative curvature fibers have the benefits of high bandwidth, low loss, and provide higher transmission performances. Birefringence of the fiber is particularly important, with potential application value in communication, imaging and other fields. In this paper, a metasurface structure-assisted terahertz negative curvature fiber is designed to improve the birefringence characteristic. This work breaks through the conditional design ideas, and theoretically analyzes the effect of adding gold microstructures in the cladding structures on the transmission characteristics of negative curvature fibers. The investigation results show that the birefringence of the designed fiber exhibits a significant increase in most frequency range between 1.75–2.4 THz compared to the results before adding gold microstructures. The maximum birefringence reaches as high as 0.00216 when the frequency is 2.175 THz and θ is 90°. Compared to the original frequency, the birefringence has increased by nearly an order of magnitude. The highest birefringence has been increased to 3.5 times. In addition, the influences of the gold microstructures on the confinement loss, waveguide dispersion, and effective mode field area are also investigated. This fiber provides a reference for the design of high birefringence terahertz fibers in the future.

Effect of atmospheric plasma treatment and wet blast on adhesion characteristics of carbon fiber reinforced LM-PAEK thermoplastic composites

Surface characteristics of polymeric materials are quite challenging for adhesion especially thermoplastics, requiring specific surface preparation operations before reaching successful bonding. These processes are principally aimed to increase the low surface energy of the material, bonding agent contact area and wetting characteristics to provide proper and strong adhesion. In this study, two different surface treatments with different processing parameters were applied to CF/LM-PAEK thermoplastic composites in order to examine the changes on surface characteristics and adhesion strengths. Apart from desired surface treatments for thermoplastics indicated in previous studies and backgrounds, wet blasting method is used to prepare surfaces before bonding. Separately prepared surfaces, applying wet blasting and atmospheric plasma treatment, were adhered using epoxy-based film adhesive to be subjected to single lap shear testing to examine adhesion strength under tensile loading. According to the results of experimental study, it was observed that both surface treatments increased the adhesion strength of the bonded pre-consolidated CF/LM-PAEK thermoplastic composites compared to specimens having untreated surfaces.Atmospheric plasma treatment increased the surface energy by 18.24% and showed higher strength up to 14.93% compared to the untreated specimens. On the other hand, surprisingly, wet blasted specimens with lower surface energies showed high strength up to 6.48% compared to the untreated specimens. In addition to surface energies and lap shear strengths, roughness measurements and SEM surface evaluations were also issued to enlighten obtained test results accordingly.

Effect of pre-and post-partum feed supplementation of Maraz does on the productive performance of their offspring

The purpose of this experiment was to investigate the impact of maternal pre-and post-partum feed supplementation, under farm conditions, on goat kid's growth, follicle traits and fiber production. The design of experiment was supplementation from 2 months pre-partum to 2 months post-partum with 3 nutritional groups (8 does each). The first does group (GI) was fed black barley at 250 g/doe/day (traditional farmer’s practice), whereas does of the second (GII) and third (GIII) groups were fed concentrate diet at 500 and 750 g/doe/day, respectively. Results revealed that birth weight from GII and GIII was significantly (P&lt;0.05) higher by 22% (2.3 vs. 1.8 kg) than that of GI. Weaning weight and marketable live weight traits, growth rates, follicle traits except primary follicles, and fiber characteristics were significantly (P&lt;0.05) higher in (GIII) followed by (GII) and then (GI). Moreover, goat kids of the GIII attained significantly (P&lt;0.05) 37% (16.9 vs. 10.7 kg) and 26% (16.9 vs. 12.5 kg) more marketable live weight compared with GI and GII, respectively. Also, goat kids of the GIII produced 32% (813.3 vs. 553.3 g; P&lt;0.05) and14% (813.3 vs. 703.3 g; P&gt;0.05) higher fleece weight than that of GI and GII, respectively. Additionally, body weight traits, growth rates, and fiber characteristics were significantly (P&lt;0.05) affected by sex of birth. In conclusion, supplementation with an increased level of feeding concentrate pre-and post-partum of Maraz goats showed a significant (P&lt;0.05) positive effect on productive performance of their kids in comparison to the traditional farmer’s practice.

Dietary Chitosan Oligosaccharide Supplementation Improves Meat Quality by Improving Antioxidant Capacity and Fiber Characteristics in the Thigh Muscle of Broilers.

This study investigated the effects of dietary chitosan oligosaccharide (COS) supplementation on meat quality, antioxidant capacity, and muscle fiber characteristics in the thigh muscle of broilers. The results showed that dietary COS supplementation decreased shear force and increased crude protein content and nutritional value in the thigh muscle, while decreasing the content of C16:0, C18:0, and total saturated fatty acids. Dietary COS supplementation increased free radical scavenging activity, antioxidant enzyme activity, and antioxidant enzyme-related gene expression. Additionally, COS promoted MyHCI while decreasing MyHCIIb mRNA expression levels. The myofiber transformation was associated with upregulated gene expression of CaN, NFATc1, MyoD, and SIRT1. Together, the results of this study demonstrate that dietary COS supplementation improves meat quality, nutritional value, antioxidant capacity, and myofiber transformation to more oxidative muscle fibers in the thigh muscle of broilers when its supplemental level is 400 mg/kg.