Feeding Mechanism Research Articles

Fine-Structural Morphology of the Mouthparts of the Polyphagous Invasive Planthopper, Ricania speculum (Walker) (Hemiptera: Fulgoromorpha: Ricaniidae).

Simple SummaryMouthparts are the crucial organs for food detection and feeding. Here, the mouthparts of a representative of the planthopper family Ricaniidae are studied and illustrated in detail for the first time and compared to those of other species of plant-feeding Hemiptera.Mouthparts are the crucial sensory and feeding organs associated with food detection and feeding in insects. The Asian ricaniid planthopper Ricania speculum (Walker), recently introduced into Europe, can cause severe economic damage by sucking the phloem sap of tea, camphor, citrus, black locust and other plants using piercing-sucking mouthparts. To facilitate comprehensive understanding of feeding mechanisms in the Ricaniidae, the fine structure of the mouthparts of Ricania speculum was observed by scanning electron microscopy for the first time. The mouthparts are tubular, consist of a cone-shaped labrum, with a wrinkled epidermis and without sensilla; the tubular labium is divided into three segments: a slender stylet fascicle consisting of two mandibular stylets with four ridged processes and a row of longitudinal striations on the distal part of the outer surface; and two maxillary stylets with a smooth and sharp distal part, interlocked to form a larger food canal and a smaller salivary canal. On the labium, 15 kinds of sensilla of different functions were recognized. Two rows of short sensilla basiconica (SB I) are symmetrically distributed along the labial groove on the first segment. Two pairs of long sensilla basiconica (SB II) (proprioceptors) are on both sides of the labial groove at the junction of the second and third segments. A placoid, flattened sensillum (SPF) is symmetrically located laterally on the proximal end of the last segment and several flattened sensilla campaniformia (SFC) were visible on the ventral side on the second and third segments. The distribution of four types (I–IV) of sensilla cheatica of different lengths on the dorsal surface of the labium is significantly denser than on the lateral and ventral surfaces. The labial apex is divided into dorsal and ventral sensory fields, mainly including uniporous long peg sensilla (I), as well as smaller peg sensilla (II) and nonporous peg sensilla (PGSN) on each dorsal field. These nonporous sensilla basiconica (BSN I and III) occur on the ventral sensory fields and are constant in number and distribution. The nonporous sensilla basiconica (BSN II) are symmetrically arranged near the opening of the stylet fascicle similarly to two oval multiporous plate sensilla (OPSM). The sensilla arrangement is slightly different from that observed in previously studied Fulgoromorpha using scanning electron micrographs, which may reflect differences in feeding preference or behavior.

Trajectory optimization of the redundant manipulator with local variable period under multi-machine coordination

AbstractThe coordinated motion between the press and the feeding mechanism directly determines the production efficiency of the high-speed stamping line. In order to generate the high-performance trajectory of the feeding mechanism, this paper investigates the optimization of the trajectory with the local variable period. Based on the quintic B-spline curve and normal distribution, the smooth interpolation method of variable-time interval is proposed to generate the collision-free and energy-jerk-minimal trajectory with variable-time intervals. The advantage of the proposed method is that it can make the feeding mechanism transition smoothly between districts of variable-time and fixed-time intervals. It is beneficial to avoid re-performing the entire process of trajectory planning. ADAMS and actual experiments are used to validate the effectiveness of the proposed method. Results show that the proposed method can maintain the high performance of the initial trajectory, and there is no sharp point in the displacement-time and velocity-time curves. The investigation provides a new direction for the direct generation of local variable-period trajectories in the multi-machine coordination of the stamping line.

Hypothalamic GABAergic neurocircuitry in the regulation of energy homeostasis and sleep/wake control.

Gamma-aminobutyric acid (GABAergic) neuron, as one of important cell types in synaptic transmission, has been widely involved in central nervous system (CNS) regulation of organismal physiologies including cognition, emotion, arousal and reward. However, upon their distribution in various brain regions, effects of GABAergic neurons in the brain are very diverse. In current report, we will present an overview of the role of GABAergic mediated inhibitory neurocircuitry in the hypothalamus, underlying mechanism of feeding and sleep homeostasis as well as the characteristics of latest transcriptome profile in order to call attention to the GABAergic system as potentially a promising pharmaceutical intervention or a deep brain stimulation target in eating and sleep disorders.

Comparative Analysis of In Situ Eukaryotic Food Sources in Three Tropical Sea Cucumber Species by Metabarcoding.

Simple SummaryThere are large numbers of sea cucumbers naturally inhabiting tropical seas, which play an important ecological role in the habitat through their biological activity. However, despite the diversity of tropical sea cucumbers, until now there have been few studies on their exact eukaryotic food sources. In the present study, we systemically investigated the eukaryotic food sources of three sea cucumber species. We also study the differences of eukaryotic composition among three sea cucumber species and provide new insight into reasons for the differences. The reported information could be valuable in further biological and ecological studies of these species.In this study, the eukaryotic composition of gut contents in three tropical sea cucumber species, Stichopus monotuberculatus, S. chloronotus and Holothuria atra were surveyed and compared by metabarcoding analysis based on 18S rRNA gene V4 region. The sequences were assigned to 21.80 ± 1.07, 22.60 ± 0.68 and 22.40 ± 0.25 different phyla from the gut contents of S. monotuberculatus, S. chloronotus and H. atra, respectively, and those in sediment samples were assigned to 21.00 ± 1.67 phyla. The results of α-diversity showed that surface sediments had a greater eukaryotic diversity than gut contents, yet the guts of sea cucumbers had an enrichment effect on some microorganisms, including Diatomea and Apicomplex. A comparison of the gut eukaryotic community among the three species suggested that the feeding preference was different: S. monotuberculatus fed mainly on Diatomea and Arthropoda, and the other two species had higher Apicomplexa concentrations, which may be due to differences in the morphology of the tentacles and habitat preferences. Moreover, obvious different eukaryotic community composition in the gut contents of the three sea cucumber species and the surrounding sediments also might result from the animals’ selective feeding for sediment patches. The current study filled in gaps about feeding mechanisms of tropical sea cucumbers and provided a basis for further exploring the mechanism about selective feeding and sea cucumber–sediment interaction in the future.

Vertical characterisation of phylogenetic divergence of microbial community structures, interaction, and sustainability in estuary and marine ecosystems

The changes in the aquatic environmental conditions often influence the microbial community assemblages and genome repertoire. Studies investigating the aquatic diversity and ecosystem services were primarily conducted in horizontal environments while neglecting the microbial phylogenetic divergences, biotrophic interactions, and eco-sustainability at water vertical layers. We investigated the mechanisms of microbial transitions, and the ecological significance of water depth layers in the estuary and marine ecosystems. The results demonstrated that the salinity and turbidity increased with increasing water depth (0–50 m), while temperature and pH decreased significantly. The bacterial and eukaryotic diversity and composition significantly increased with an elevating water depth. Bacterial phyla such as Desulfobacterota, Acidobacteriota, Myxococcota, Gemmatimonadota, Campilobacterota, and Latescibacterota were increased significantly. However, niche preference occurred, and some microbes showed differential nestedness at water vertical layers. In the eukaryotic community, Eustigmatales group were the only clades predominantly phylogenetically nested at the surface water depth. c_Conoidasida, o_Gregarinasina, f_Eugregarinorida, and g_Lankesteria were the most predominant at the middle depth. While Mediophyceae clades, p_SAR, and the Animalia clades were the most predominant groups nested at the bottom depths. The microbial interaction, structure, and stability were increased with increasing depth. The vertical phylogenetic turnover of the microbial community was related to the feeding mechanisms. Phototrophic organisms were particularly adapted at the surface, and middle depth by parasitic and pathogenic organisms, while the bottom was inhabited by diatoms, decomposers, and detritus protists. This study demonstrated that the bottom depth was the most ecologically stable area with more profound ecosystem services.

Fast and Furious: Energetic Tradeoffs and Scaling of High-Speed Foraging in Rorqual Whales.

SynopsisAlthough gigantic body size and obligate filter feeding mechanisms have evolved in multiple vertebrate lineages (mammals and fishes), intermittent ram (lunge) filter feeding is unique to a specific family of baleen whales: rorquals. Lunge feeding is a high cost, high benefit feeding mechanism that requires the integration of unsteady locomotion (i.e., accelerations and maneuvers); the impact of scale on the biomechanics and energetics of this foraging mode continues to be the subject of intense study. The goal of our investigation was to use a combination of multi-sensor tags paired with UAS footage to determine the impact of morphometrics such as body size on kinematic lunging parameters such as fluking timing, maximum lunging speed, and deceleration during the engulfment period for a range of species from minke to blue whales. Our results show that, in the case of krill-feeding lunges and regardless of size, animals exhibit a skewed gradient between powered and fully unpowered engulfment, with fluking generally ending at the point of both the maximum lunging speed and mouth opening. In all cases, the small amounts of propulsive thrust generated by the tail were unable to overcome the high drag forces experienced during engulfment. Assuming this thrust to be minimal, we predicted the minimum speed of lunging across scale. To minimize the energetic cost of lunge feeding, hydrodynamic theory predicts slower lunge feeding speeds regardless of body size, with a lower boundary set by the ability of the prey to avoid capture. We used empirical data to test this theory and instead found that maximum foraging speeds remain constant and high (∼4 m s–1) across body size, even as higher speeds result in lower foraging efficiency. Regardless, we found an increasing relationship between body size and this foraging efficiency, estimated as the ratio of energetic gain from prey to energetic cost. This trend held across timescales ranging from a single lunge to a single day and suggests that larger whales are capturing more prey—and more energy—at a lower cost.

Coral-inhabiting Trapezia crabs forage on demersal plankton

The Trapeziidae constitute a widely distributed and common family of obligatory coral-dwelling crabs on Indo-west Pacific coral reefs, feeding on coral tissue and mucus. In situ nocturnal surveys on Stylophora pistillata (a common branching pocilloporid coral species in the Gulf of Eilat, Red Sea), revealed Trapezia cymodoce and Trapezia digitalis crabs foraging on swimming demersal plankton, including amphipods, copepods, isopods, swimming polychaetes, and occasionally fishes, employing three plankton feeding mechanisms. Laboratory experiments demonstrated that crabs actively searched for Artemia when these were present in the aquaria together with either dead or live coral branches, but did not do so when corals were absent. Overall, the results indicate that trapeziid crabs play a role as planktivorous reef organisms. This suggests the need for further study of the feeding habits of members of this family, considering the potential impacts of their foraging on demersal plankton dynamics in coral reefs.

Bottom‐up effects of plant quantity and quality on arthropod diversity across multiple trophic levels in a semi‐arid grassland

Abstract Plant quantity and quality can independently affect the diversity of the entire arthropod communities and multiple arthropod taxa in grassland ecosystems. However, it remains unclear how these effects on arthropod taxa at one trophic level propagate through food web to influence the diversity of higher trophic levels. We performed a monoculture experiment with 15 herbaceous species in the Inner Mongolian grassland to investigate how natural variations in plant productivity and host leaf traits affect herbivore taxon richness, which, in turn, affects predator taxon richness. For herbivores, plant productivity indirectly promoted herbivore taxon richness by increasing herbivore biomass, which was attributed to the increases in the richness of dominant sucking herbivores and endophytes with high food requirements. However, the high plant quality indicator (e.g. high leaf protein, phosphorus and water contents, and high leaf protein to carbohydrate ratio) directly increased, whereas the low plant quality indicator (e.g. high leaf lignin content) directly decreased herbivore taxon richness. Taxon richness of chewing and sucking herbivores with specific feeding modes (tearing or sucking mouthparts) showed strong positive responses to increasing plant quality. For predators, herbivore taxon richness, rather than herbivore biomass, mainly mediated the positive effects of plant productivity and the high plant quality indicator, but the negative effect of the low plant quality indicator, on predator taxon richness. At the feeding guild level, the taxon richness of parasitoids, other predators and spiders exhibited positive responses to different herbivores, which was attributed to their different diet preferences. Predator diversity could be promoted by prey partitioning among predator guilds facilitating species coexistence. At the family level, the taxon richness of most predator families was positively correlated with that of more than one herbivore family, suggesting that high predator diversity may be caused by balanced diets owing to high prey diversity. Synthesis. Natural variations in plant quantity and quality can substantially affect the diversity of herbivores and cascade up the food web to affect predators. Specificity and mechanisms of feeding have a large impact on the responses of arthropod guilds at each trophic level.

Convergence, divergence, and macroevolutionary constraint as revealed by anatomical network analysis of the squamate skull, with an emphasis on snakes

Traditionally considered the earliest-diverging group of snakes, scolecophidians are central to major evolutionary paradigms regarding squamate feeding mechanisms and the ecological origins of snakes. However, quantitative analyses of these phenomena remain scarce. Herein, we therefore assess skull modularity in squamates via anatomical network analysis, focusing on the interplay between ‘microstomy’ (small-gaped feeding), fossoriality, and miniaturization in scolecophidians. Our analyses reveal distinctive patterns of jaw connectivity across purported ‘microstomatans’, thus supporting a more complex scenario of jaw evolution than traditionally portrayed. We also find that fossoriality and miniaturization each define a similar region of topospace (i.e., connectivity-based morphospace), with their combined influence imposing further evolutionary constraint on skull architecture. These results ultimately indicate convergence among scolecophidians, refuting widespread perspectives of these snakes as fundamentally plesiomorphic and morphologically homogeneous. This network-based examination of skull modularity—the first of its kind for snakes, and one of the first to analyze squamates—thus provides key insights into macroevolutionary trends among squamates, with particular implications for snake origins and evolution.

Food niches of planktonic rotifers: Diversification and implications

AbstractThe diverse diets of common planktonic rotifers are described in detail from field and laboratory observations and experiments. Also considered are methodological approaches, rotifer feeding mechanisms, and the availability in natural waters of less well‐known food items (detritus, picoplankton, protozoans). Despite much variation among and within rotifer genera, food niches of planktonic rotifers can be subdivided into four broad, overlapping categories defined by the predominant types and sizes of food ingested: (1) microphagous rotifers that eat fine detritus/organic aggregates, picoplankton, and 2–10 μm nanoplankton; (2) polyphagous rotifers that eat the above items, larger nanoplankton, and small (20–50 μm) microplankton; (3) macrophagous algivores that eat 5–50 μm algae; and (4) macrophagous omnivores/predators that eat 5–250 μm algae, protozoans, and metazoans. These diet‐based categories have ecological advantages over categories based on rotifer morphology or feeding mode. The information on diets assembled here is important for understanding: (1) the population dynamics of planktonic rotifers and their food organisms; (2) the position of rotifers in classical and microbial food webs; (3) the seasonality, spatial distribution, and species diversity of rotifers in plankton communities; and (4) food overlap, and thus potential resource competition, among planktonic protozoans, rotifers, and crustaceans.

Microplastic in oysters: A review of global trends and comparison to southern Australia

Microplastics have been documented in a plethora of marine environments and organisms. These small plastics threaten ecosystem health, with implications for seafood species’ health. Oysters are an important cultural and economic aquaculture species globally. Due to their filter feeding mechanisms, they can act as an indicator species and proxy for environmental contamination. This makes them an ideal organism for investigating microplastic pollution. Here, we first systematically reviewed the global literature investigating microplastic in oysters. Globally, 94.4% of all oysters had microplastics, with an average of 1.41 ± 0.33 per gram of soft tissue wet weight (gww). The review showed that wild-caught oysters contained more than double the amount of microplastic than aquaculture raised specimens, likely reflecting the clean and productive waters in which oyster aquaculture systems are commonly located. Second, we quantified microplastic presence and polymer type in commercially farmed oysters (Crassostrea gigas and Saccostrea glomerata) across a broad spatial scale, covering eight sites in southern Australia. Microplastics were present in 49.4% of all sampled oysters, with specimens from all locations containing microplastics. On average, whole oysters contained 0.83 ± 0.08 microplastics per individual or 0.09 ± 0.01 microplastics gww. Using Fourier-Transform Infrared Spectroscopy, we identified that 62% of the verified microplastics were vexar plastic netting, a low-density polyethylene commonly used in aquaculture production. Understanding the abundance and source of microplastic in these key seafood species is essential to determine if oysters are vulnerable to these contaminants and pose a risk to the oyster aquaculture industry as an important food resource.

A wide axial-ratio beamwidth circularly-polarized oval patch antenna with sunlight-shaped slots for gnss and wimax applications

This paper proposes a quadruple band stacked oval patch antenna with sunlight-shaped slots supporting L1/L2/L5 GNSS bands and the 2.3 Ghz WiMAX band. The antenna produces right-hand circular polarization waves with wide axial-ratio beamwidth of 223/216^{circ } and 231/203^{circ } at two orthogonal cutplanes at L5 and L2 GNSS bands, respectively. Firstly, the resonant modes TM_{110} and TM_{210} are excited inside a single layer oval patch antenna, where resonance frequencies are calculated using Mathieu functions. Meanwhile, it is shown that another version of the mode TM_{110} with similar distribution but orthogonal direction is excitable inside the same oval patch. Then, a second stacked oval patch layer is added, which splits the resonance frequency of each of the modes TM_{110} and TM_{210} into two different values. Depending on the probe feed position and the separation between the two layers, the phase shifts between modes versions in the upper and the lower layers change. Thus, by fine-tuning the probe feed position and the separation between layers, spatially-orthogonal with quadrature-phase-shift versions of the mode TM_{110} are obtained, producing a circularly polarized waves at L2 and L5 bands. Furthermore, sunlight shaped slots are etched into the upper and lower layer patches to fine tune the phase shifts between different modes versions, which enhances the overall axial-ratio beamwidth. Despite the simplicity of the overall structure and the feeding mechanism utilized in the proposed design, wide axial-ratio beamwidths are obtained, as compared to previous works. The proposed antenna shows low reflection coefficient values at 1.14–1.29 GHz (L2/L5), 1.45–1.6 GHz (L1), and 2.26–2.4 GHz (WiMAX). The antenna gains are 5.9, 5.6, 6, and 6.5 dBi/dBic at L5, L2, L1, and WiMAX bands, respectively. The half-power beamwidths are 99/96^{circ }, 102/96^{circ }, 112/85^{circ }, and 65/48^{circ } at two orthogonal cutplanes at L5, L2, L1, and WiMAX bands, respectively.

Babesia, Theileria, Plasmodium and Hemoglobin.

The Propagation of Plasmodium spp. and Babesia/Theileria spp. vertebrate blood stages relies on the mediated acquisition of nutrients available within the host’s red blood cell (RBC). The cellular processes of uptake, trafficking and metabolic processing of host RBC proteins are thus crucial for the intraerythrocytic development of these parasites. In contrast to malarial Plasmodia, the molecular mechanisms of uptake and processing of the major RBC cytoplasmic protein hemoglobin remain widely unexplored in intraerythrocytic Babesia/Theileria species. In the paper, we thus provide an updated comparison of the intraerythrocytic stage feeding mechanisms of these two distantly related groups of parasitic Apicomplexa. As the associated metabolic pathways including proteolytic degradation and networks facilitating heme homeostasis represent attractive targets for diverse antimalarials, and alterations in these pathways underpin several mechanisms of malaria drug resistance, our ambition is to highlight some fundamental differences resulting in different implications for parasite management with the potential for novel interventions against Babesia/Theileria infections.

Biomechanics of the jaws of spotted ratfish.

Elasmobranch fishes (sharks, skates and rays) consume prey of a variety of sizes and properties, and the feeding mechanism typically reflects diet. Spotted ratfish, Hydrolagus colliei (Holocephali, sister group of elasmobranchs), consume both hard and soft prey; however, the morphology of the jaws does not reflect the characteristics typical of durophagous elasmobranchs. This study investigated the mechanical properties and morphological characteristics of the jaws of spotted ratfish over ontogeny, including strain, stiffness and second moment of area, to evaluate the biomechanical function of the feeding structures. Compressive stiffness of the jaws (E=13.51-21.48 MPa) is similar to that of silicone rubber, a very flexible material. In Holocephali, the upper jaw is fused to the cranium; we show that this fusion reduces deformation experienced by the upper jaw during feeding. The lower jaw resists bending primarily in the posterior half of the jaw, which occludes with the region of the upper jaw that is wider and flatter, thus potentially providing an ideal location for the lower jaw to crush or crack prey. The mechanical properties and morphology of the feeding apparatus of spotted ratfish suggest that while the low compressive stiffness is a material limit of the jaw cartilage, spotted ratfish, and perhaps all holocephalans, evolved structural solutions (i.e. fused upper jaw, shape variation along lower jaw) to meet the demands of a durophagous diet.

The Effect of Thermally Robust Ballistic Mechanisms on Climatic Niche in Salamanders.

SynopsisMany organismal functions are temperature-dependent due to the contractile properties of muscle. Spring-based mechanisms offer a thermally robust alternative to temperature-sensitive muscular movements and may correspondingly expand a species’ climatic niche by partially decoupling the relationship between temperature and performance. Using the ballistic tongues of salamanders as a case study, we explore whether the thermal robustness of elastic feeding mechanisms increases climatic niche breadth, expands geographic range size, and alters the dynamics of niche evolution. Combining phylogenetic comparative methods with global climate data, we find that the feeding mechanism imparts no discernable signal on either climatic niche properties or the evolutionary dynamics of most climatic niche parameters. Although biomechanical innovation in feeding influences many features of whole-organism performance, it does not appear to drive macro-climatic niche evolution in salamanders. We recommend that future work incorporate micro-scale environmental data to better capture the conditions that salamanders experience, and we discuss a few outstanding questions in this regard. Overall, this study lays the groundwork for an investigation into the evolutionary relationships between climatic niche and biomechanical traits in ectotherms.

A Low-Profile Compact Meander Line Telemetry Antenna with Low SAR for Medical Applications

A low-profile Compact Meander Line Telemetry Antenna (CMLTA) operating at 402.5 MHz for the Medical Implant Communication System (MICS) band medical applications is introduced. The proposed antenna focuses specifically on pacemaker telemetry applications. The meander line technique with an open loop configuration and simple transmission line feeding mechanism has been used for achieving the compact design. Based on the theory of surface current distribution, the proposed technique provides the opportunity to increase the electrical dimensions while decreasing the physical dimensions of the antenna. Further design optimization is carried out to optimize the overall antenna size to a maximum volume of 4080 mm3. By introducing CMLTA, the size of the antenna is reduced by 79% as compared to the previous work. The proposed antenna demonstrated satisfactory performance with 10 dB bandwidth of 6.17%, a maximum gain of -22 dBi and an EIRP of -25.28 dBi. The analysis of Specific Absorption Rate under premise use of 1 W input power provided the maximum 1 g and averaged 10 g SAR of 74.7 W/kg and 17.7 W/kg, respectively, demonstrating a satisfactory level according to the IEEE standard safety guidelines. Fabrication and measurements are carried out where measured results are found to be in good agreement with the simulated results. With the optimized dimensions, satisfactory gain, EIRP, and SAR performance, the proposed CMLTA is deemed suitable for pacemaker telemetry applications for effective communication.

A z-gradient array coil with a dedicated active-shielded array coil for MRI.

An array-based z-gradient coil with a set of programmable power amplifiers can outperform a conventional z-gradient coil and make it highly customizable with a broader range of tunable features. A dynamically adjustable imaging volume can be achieved using a pair of independent arrays and a modified optimization procedure based on analytic equations. Two modes of operation are provided: (a) standard mode that resembles a conventional coil; (b) advanced mode, where all performance parameters can be adjusted employing a controllable feeding mechanism. Commercial software is used to demonstrate the validity and feasibility of the proposed coil. Primary and shield array diameters are 24 and 30 cm, both of which comprise 12 bundles of 10 turns copper wires. Maximum feeding voltage/current is 250 V/100 A for all array elements. Four distinct magnetic profiles are provided: (a) conventional profile with 140 mm diameter spherical region of interest, 120 mT/m gradient, and up to 4500 T/m/s slew rate; (b) profile of 200 mT/m, 70 mm region of interest, and up to 6900 T/m/s slew rate; (c) 60 mm axially shifted 70 mm region of interest with 120 mT/m strength and 3600 T/m/s slew rate; and (d) profile of 370 mT/m, 120 mm region of interest, and 3700 T/m/s slew rate when the active shield is reverse fed. By using an active-shielded gradient array coil, the magnetic field profile of the imaging volume can be adjusted dynamically, and it can provide new features and a wide range of field profiles for diverse applications in MRI.

The effects of material’s features and feeding mechanism on high-gain antenna construction

This study investigates the performance of flexible, wideband antennas with high gain properties. The high gain feature can often be obtained by positioning a reflector in the same planes as the adjacent radiator. For flexibility, this survey discusses the antennas that were printed on the flexible substrate materials. Based on these properties, the antenna can be recognized in a variety of wireless applications, including wireless local-area-network (WLAN), Worldwide Interoperability for microwave access (WI-Max), wireless body area network (WBAN), and radio frequency identification (RFID), as well as wearable applications. The high-gain antennas are compact radio wave-based antennas that provide precise radio transmission management. Such antennas deliver more energy to the receiver, increasing the frequency of the received signal. By gathering more power, high-gain antennas may emit signals quicker. Furthermore, because directional antennas broadcast fewer signals from the main wave, interference may be greatly minimized. Finally, this article identifies the role of lightweight high gain flexible antennas in terms of their size, substrate materials, design, and feeding mechanisms, all of which can affect bandwidth, gain, radiation efficiency, and other important factors.

Investigation of a Dual-Layer Metasurface-Inspired Fractal Antenna with Dual-Polarized/-Modes for 4G/5G Applications

In this research article, a dual-polarized compact bow-tie-shaped irregular fractal antenna with a dual metasurface (DMS) for directional radiation applications is designed using a dual-mode simple feeding mechanism. A short-circuited strip linked between the impedance transformation feed and the radiating patch activates the induced coupling modes, which are capacitive (C-mode) and inductive (L-mode), respectively. The C-mode antenna operates at 2.39–2.53 GHz, whereas the L-mode antenna operates at 2.88–4.49 GHz. It comprises a DMS positioned at 0.22λ∘ from the antenna with 0.016λ∘ separation and a 4 × 4 array of checkerboard type hole-injected tiny unit cells on each metasurface. A rectangular cavity-backed slot was employed as the ground plane to emulsify the reflected energy waves from the DMS, in order to start the coupling process with the boresight radiation, resulting in high gain and suppressed backward radiations. The gain in C-mode was 6.74 dBi, and the gain in L-mode was 7.7 dBi. For validation, a miniaturized metasurface antenna with the overall size of 0.32λ∘ × 0.32λ∘ × 0.22λ∘ (where λ∘ is the free-space wavelength at 2.45 GHz) was fabricated and measured. The measured outcomes highlight its potential for 4G/5G wireless applications.

A salp swarm algorithm based on Harris Eagle foraging strategy

For the operation of the salp swarm algorithm(SSA), the leaders fall into local optimum, which leads to the population falling into local optimum problem. In this paper, a salp swarm algorithm based on Harris Eagle foraging strategy is proposed(ISSAHF). Harris hawk optimization algorithms of four types of feeding mechanism are integrated into salp location update process optimization algorithm follower. To strengthen the exploitation of potential areas, complemented by a multi-point leadership crossover strategy to maintain a balance between exploitation and exploration. The performance of the proposed ISSAHF was compared, and Wilcoxon’s statistical analysis was performed on 20 benchmark functions including unimodal, multimodal, and partial CEC2014. Finally, ISSAHF is applied to three practical engineering optimization problems to evaluate its optimization performance further.