Transmission Line Fault Detection Research Articles

Detection of single-phase-to-ground faults in distribution networks based on Gramian Angular Field and Improved Convolutional Neural Networks

Fault detection of transmission lines is a fundamental guarantee for the stable operation of the power grid. The characteristic information is not obvious when a single-phase-to-ground fault occurs in the complex distribution network, and the existing methods are vulnerable to the problems of fault conditions and environmental noise. To address this problem, a new method of distribution network fault diagnosis is proposed based on Gramian Angular Field (GAF) and Improved Convolutional Neural Networks (ICNN) in this paper. Firstly, the time-series signals are normalized and transformed to a polar coordinate system. The encoded signals are converted into visual virtual images through the inner product calculation of GAF algorithm. Secondly, multi-scale module and attention mechanism are added to the convolutional layer of the ICNN. Among them, the multi-scale module, which enhances the local feature extraction capability for the original image, is composed of multiple convolutional channels. The purpose of attention mechanism is to help the weight distribution and depth feature filtering of ICNN, focusing on the key features between fault data. Finally, the transfer learning method is further introduced to improve the fault diagnosis model performance for different online situations. The experimental results show that the overall accuracy of the proposed fault location method is close to 99% under different topological situations. Even with the influence of ambient noise, the accuracy of GAF-ICNN still approaches 97.5%.

A novel MODWT-based fault detection and classification scheme in VSC-HVDC transmission line

A novel MODWT-based fault detection and classification scheme in VSC-HVDC transmission line

IoT Based Three Phase Transmission Line Fault Detec-tion & Analysis

IoT Based Three Phase Transmission Line Fault Detec-tion & Analysis

Time-Frequency Transformation Technique with Various Mother Wavelets for DC Fault Analysis in HVDC Transmission Systems

HVDC transmission has become a cost-effective option for transferring high voltage over greater distances. Protecting an HVDC transmission line is more challenging than protecting an AC transmission line due to its low impedance and absence of zero crossing DC current. Power electronic devices have finite overload capability, and standard relays are ineffective for HVDC line protection. Heavy current is generated by DC faults in HVDC (T/L), hence it is necessary to treat DC line faults in short, medium, and long HVDC (T/L) systems with different fault resistance. It is crucial to research fault detection methods based on time-frequency analysis by choosing appropriate algorithms using various (MW) methodologies for short, medium, and long HVDC transmissions at various fault resistances in order to protect the HVDC system. In this work, we examine how the length of an HVDC transmission line and fault resistance at both sides (inverter and rectifier) affects the selection of suitable mother wavelets for DC fault, using mean parameter and time-frequency transformation. SimPower System of Matlab is used to evaluate the impact of HVDC transmission line length and fault resistance on the selection of suitable mother wavelets. Simulation results show that Coif3 is an ideal wavelet for fault detection in medium transmission lines at different fault resistances. On the other hand, Rbio3.1 is more suitable for fault detection in long transmission lines at various fault resistances. For short and medium HVDC transmission lines, different mother wavelets were found to be suitable at different fault resistances. Therefore, it is essential to carefully consider the specific characteristics of the transmission line and the fault scenario when selecting a mother wavelet for accurate fault location.

Fault Detection of Transmission Lines Using Unmanned Aerial Vehicle (UAV)

Fault Detection of Transmission Lines Using Unmanned Aerial Vehicle (UAV)

A normalized Haar wavelet transformation based firefly optimization algorithm for power transmission line fault detection problems

ABSTRACT Through transmission lines (TLs), an electric power transmission system has been able to transmit power from generating stations to consumers. During transmission, various kinds of malfunctions take place and they are termed as a fault. Although fault is undesirable, it is unavoidable event hampering the smooth functioning of the power system. In power transmission systems, and a large number of voltage and current signal, distortions take place due to faults. Faults occur in power TL causing power supply interruption. Several fault detection techniques have been presented by researchers to detect a fault in TL. However, the time required to locate the fault remained higher and the power loss rate (PLR) was not reduced. To overcome these issues and identify faults in electrical power TL, Haar wavelet feature extraction-based firefly optimized fault detection (HWFE-FFOFD) method has been introduced. The power TL signal sample has been taken as an input. Zero-mean normalization is the pre-processing approach that converts the transmission signal sample into a specified range. To extort features (i.e. voltages and current values) with higher accuracy, the normalized signal has been given to Haar Wavelet Transform. Then, the extracted features at different time instants have been given to the firefly optimized fault detection (FFOFD) algorithm. In the FFOFD algorithm, extracted features have been considered as firefly populations. The FFOFD algorithm functions with the flashing behavior of a firefly. At last, the firefly position has been updated and ranked according to light intensity to detect a fault in electrical power TL. In this manner, the fault detection time (FDT) gets reduced using HWFE-FFOFD method. HWFE-FFOFD method is evaluated in FEA, FDT, and PLR. From the experimental results obtained, it can be confirmed that the HWFE-FFOFD method has been able to enhance accuracy by 14% and minimize time by 26% and PLR by 62% when compared to conventional methods.

TRANSMISSION LINE FAULT DETECTION SYSTEM

Transmission line is the most important part of the power system. Transmission lines a principal amount of power. The requirement of power and its allegiance has grown up exponentially over the modern era, and the major role of a transmission line is to transmit electric power from the source area to the distribution network. The exploded between limited production and a tremendous claim has grown the focus on minimizing power losses. Losses like transmission loss and also conjecture factors as like as physical losses to various technical losses, Another thing is the primary factor it has a reactive power and voltage deviation are momentous in the long-range transmission power line. In essentially, fault analysis is a very focusing issue in power system engineering to clear fault in short time and re-establish power system as quickly as possible on very minimum interruption. However, the fault detection that interrupts the transmission line is itself challenging task to investigate fault as well as improving the reliability of the system. The transmission line is susceptible given all parameters that connect the whole power system. This paper presents a review of transmission line fault detection.

TRANSMISSION LINE FAULT DETECTION SYSTEM

Transmission line is the most important part of the power system. Transmission lines a principal amount of power. The requirement of power and its allegiance has grown up exponentially over the modern era, and the major role of a transmission line is to transmit electric power from the source area to the distribution network. The exploded between limited production and a tremendous claim has grown the focus on minimizing power losses. Losses like transmission loss and also conjecture factors as like as physical losses to various technical losses, Another thing is the primary factor it has a reactive power and voltage deviation are momentous in the long-range transmission power line. In essentially, fault analysis is a very focusing issue in power system engineering to clear fault in short time and re-establish power system as quickly as possible on very minimum interruption. However, the fault detection that interrupts the transmission line is itself challenging task to investigate fault as well as improving the reliability of the system. The transmission line is susceptible given all parameters that connect the whole power system. This paper presents a review of transmission line fault detection.

Review on IOT based Transmission Line Fault Detection

Abstract: The electrical system is made up of numerous unique parts. One of these is the transmission system, which involves sending electricity from substations and substations to consumers along power lines. This paper provides a review of the research being done for Internet of Things-based transmission line fault detection.

Shunt faults detection and classification in electrical power transmission line systems based on artificial neural networks

PurposeThis study aims to focus on an adaptive method for fault detection and classification of fault types that trigger in three-phase transmission lines using artificial neural networks (ANNs). The proposed scheme can detect and classify several types of faults, including line-to-ground, line-to-line, double-line-to-ground, triple-line and triple-line-to-ground faults.Design/methodology/approachThe fundamental components of three-phase current and voltage were used as inputs in the ANNs. An analysis of the impact of variations in the fault resistance, fault type and fault inception time was conducted to evaluate the ANNs performance. The survey compares the performance of the multi-layer perceptron neural network (MLPNN) and Elman recurrent neural network trained with the backpropagation learning technique to improve each of the three phases of the fault detection and classification process. A detailed analysis validates the choice of the ANNs architecture based on the variation in the number of hidden neurons in each step.FindingsThe mean square error, root mean square error, mean absolute error and linear regression are measured to improve the efficiency of the ANN models for both fault detection and classification. The results indicate that the MLPNN can detect and classify faults with a satisfactory performance.Originality/valueThe smart adaptive scheme is fast and accurate for fault detection and classification in a single circuit transmission line when faced with different conditions and can be useful for transmission line protection schemes.

UAV Aerial Image Generation of Crucial Components of High-Voltage Transmission Lines Based on Multi-Level Generative Adversarial Network

With the aim of improving the image quality of the crucial components of transmission lines taken by unmanned aerial vehicles (UAV), a priori work on the defective fault location of high-voltage transmission lines has attracted great attention from researchers in the UAV field. In recent years, generative adversarial nets (GAN) have achieved good results in image generation tasks. However, the generation of high-resolution images with rich semantic details from complex backgrounds is still challenging. Therefore, we propose a novel GANs-based image generation model to be used for the critical components of power lines. However, to solve the problems related to image backgrounds in public data sets, considering that the image background of the common data set CPLID (Chinese Power Line Insulator Dataset) is simple. However, it cannot fully reflect the complex environments of transmission line images; therefore, we established an image data set named “KCIGD” (The Key Component Image Generation Dataset), which can be used for model training. CFM-GAN (GAN networks based on coarse–fine-grained generators and multiscale discriminators) can generate the images of the critical components of transmission lines with rich semantic details and high resolutions. CFM-GAN can provide high-quality image inputs for transmission line fault detection and line inspection models to guarantee the safe operation of power systems. Additionally, we can use these high-quality images to expand the data set. In addition, CFM-GAN consists of two generators and multiple discriminators, which can be flexibly applied to image generation tasks in other scenarios. We introduce a penalty mechanism-related Monte Carlo search (MCS) approach in the CFM-GAN model to introduce more semantic details in the generated images. Moreover, we presented a multiscale discriminator structure according to the multitask learning mechanisms to effectively enhance the quality of the generated images. Eventually, the experiments using the CFM-GAN model on the KCIGD dataset and the publicly available CPLID indicated that the model used in this work outperformed existing mainstream models in improving image resolution and quality.

Evaluation of Wavelet Transform Based Feature Extraction Techniques for Detection and Classification of Faults on Transmission Lines Using WAMS Data

The smart grid is an intelligent power system network that should be reliable and resilient for sustainable operation. Wide-Area Measurement Systems (WAMS) are deployed in the power grid to provide real-time situational awareness to the power grid operators. An excellent strategy for exploiting the WAMS data effectively is to extract relevant insights from the increasing volume of data collected. Feature extraction techniques are pivotal in developing data-driven models for power systems. This paper proposes an ensemble feature extraction method for developing intelligent data-driven models for transmission line fault detection and classification. A comparative efficacy analysis of the proposed ensemble feature extraction method is carried out with state-of-the-art feature extraction methods. The models developed and evaluated with the feature data derived with the proposed method give an accuracy of 100% for fault detection and 99.78% for fault classification. This method also has the advantage of significantly reducing training and testing time. Features are extracted from the WAMS data collected by simulating an IEEE39 bus test system in the PowerWorld simulator.

The use of artificial neural network for low latency of fault detection and localisation in transmission line

One of the most critical concerns in power system reliability is the timely and accurate detection of transmission line faults. Therefore, accurate detection and localisation of these faults are necessary to avert system collapse. This paper focuses on using Artificial Neural Networks in faults detection and localisation to attain accuracy, precision and speed of execution. A 330 kV, 500 km three-phase transmission line was modelled to extract faulty current and voltage data from the line. The Artificial Neural Network technique was used to train this data, and an accuracy of 100% was attained for fault detection and about 99.5% for fault localisation at different distances with 0.0017 μs of detection and an average error of 0%–0.5%. This model performs better than Support Vector Machine and Principal Component Analysis with a higher fault detection time. This proposed model serves as the basis for transmission line fault protection and management system.

Fast and Accurate Fault Detection and Classification in Transmission Lines using Extreme Learning Machine

To provide stability and a continuous supply of power, the detection and classification of faults in the transmission lines (TLs) are crucial in this modern age. It is required to remove a faulty section from a healthy section to provide safety and to minimize power loss due to the fault. In the contemporary world, machine learning (ML) is extensively used in every aspect of life. In this study, a spontaneous fault detection (FD) and fault classification (FC) system based on ML has been proposed. MATLAB Simulink was employed to simulate two different TLs and to generate normal and fault data (Per unit voltage and current) of ten different types. TL-1 consisted of a single generator and a single load whereas TL-2 consisted of two generators and three loads. Upon normalizing the data, an extreme learning machine (ELM) algorithm was used as the classifier. Two different ELM models were developed for FD and FC purposes through training. The method achieved fault classification accuracies of 99.18% and 99.09% for the TL-1 and TL-2 respectively. On the other hand, fault detection accuracies of 99.53% and 99.60% were achieved for the TL-1 and TL-2. The proposed ELM model compared to a traditional artificial neural network (ANN) model demonstrated relatively a shorter processing time and reduced computational complexity. In addition, the proposed method outperformed the existing state-of-the-art methods.

Hierarchical Temporal Memory (HTM)Approach for Fault Detection in Transmission Line

Hierarchical Temporal Memory (HTM)Approach for Fault Detection in Transmission Line

Automated Transmission Line Fault Detection using Distance Locator

Faults play an important role in affecting the reliability of power system. More than 80% of the power system faults occur in transmission sector which badly effect the reliability of supply and causes damage to the system. So, it is compulsory to monitor the transmission lines in normal and faulty conditions and clear the fault as soon as identified. The main aim of this proposed research is to design a circuit which will have a capability of determining the type of fault and exact location of fault. From the results of simulations, it has been concluded that the four types of faults such as L-G, L-L and L- L-G have been detected with their location remotely. Afterwards, transfer its data to the utility mobile phone of the user with the help of GPS and NodeMCU.

Transmission line fault detection and classification based on SA-MobileNetV3

Accurate fault detection and classification help to analyze fault causes and quickly restore faulty phases. Deep learning can automatically extract fault features and identify fault types from the original three-phase voltage and current signals. However, this still imposes challenges such as recognition accuracy and computational complexity. More importantly, high level fault features cannot be extracted in the one-dimensional time series. This paper presents a robust fault classification method based on SA-MobileNetV3 for transmission systems. Considering that the SE (Squeeze-and-Excitation) attention module cannot aggregate the spatial dimension information on the channel, SA (shuffle attention) module is introduced into MobileNetV3, which can effectively fuse the importance of pixels in different channels and in different locations at the same channel. Also, transforming the time series three-phase voltage and current signals into two-dimensional images based on CWT (continuous wavelet transform) makes the proposed method be similar to image recognition, which can mine high level fault features and classify the faults visually. To verify the effectiveness of the method, a 735kV transmission line model is built for data generation through Simulink. Various kinds of fault conditions and factors are considered to verify the adaptability and generalizability. Simulation results show that the method can quickly and accurately identify 11 types of faults, and the accuracy rate is as high as 99.90%. A comparison between the proposed method and other existing techniques shows the superiority of the proposed SA- MobileNetV3, and better anti-noise performance makes it more suitable for real fault signals taken on-site.

Online fault detection and classification of 3-phase long transmission line using machine learning model

Online fault detection and classification of 3-phase long transmission line using machine learning model

A Robust Fault Diagnosis Scheme using Deep Learning for High Voltage Transmission Line

The transmission lines repeatedly face an aggregation of shunt-faults and its impact in the real time system increases the vulnerability, damage in load, and line restoration cost. Fault detection in power transmission lines have become significantly crucial due to a rapid increase in number and length. Any kind of interruption or tripping in transmission lines can result in a massive failure over a large area, which necessitates the need of effective protection. The diagnosis of faults help in detecting and classifying transients that eventually make the protection of transmission lines convenient. In this paper, we propose a deep learning-enabled technique for the detection and classification of transmission line faults. The faulty information are extracted using Discrete Wavelet Transform (DWT) and fed into the multilayer perceptron classification model. The results indicate that the proposed approach is capable of accurately classifying and detecting faults in transmission line with high precision.

Application of machine learning methods in fault detection and classification of power transmission lines: a survey

Application of machine learning methods in fault detection and classification of power transmission lines: a survey