False Identification Research Articles

Coherence and Intensity Statistical Mapping of Earthquake Affected Areas using Sentinel-1 Images

Abstract. The January 1, 2024, Noto Peninsula earthquake left many devastated areas. Right after the event, aerial photography provided the initial assessment but covered only specific areas. Satellite images with optical sensors that are freely available are limited by spatial resolution and oftentimes covered by cloud. The Sentinel-1 Synthetic Aperture Radar (SAR) due to its all-weather sensing capability proved to be useful in mapping the extent of the affected areas. This study mapped Wajima City where earthquake aftereffects were severe as reported using coherence and intensity mapping. Pre- and post-event images were used to rapidly identify affected areas. Based on the result, taking the coherence of one pre- and one post-event images can give an impression of wide earthquake damage. The coherence of two post-event images compared with two pre-event images provides a better estimate of affected areas. Taking multiple pre- and post- event images improved the map because the large variation of the intensity is minimized through time-series averaging. Using a simple RGB composite, the affected areas were mapped. Threshold mapping was also used to extract collapsed buildings/houses using a training dataset. The mean coherence difference and mean intensity difference between pre- and post-event images were the two variables used. The computed minimum threshold for the mean coherence difference was 0.35. However, the average not the minimum of the mean intensity difference of 3.0 was used as initial value. Using mean coherence difference>=0.35 gave a high accurate prediction of collapsed buildings at 73.47% but also has false identification of 30.95%. To negate the overprediction, the mean intensity difference<=4.0 was integrated. The result lowered the overprediction to 20.75% but also lowered the accuracy to 64.97%. This assessment was only conducted in the fire-razed morning market in Wajima City.

Phosphorylation in the Plasmodium falciparum Proteome: A Meta-Analysis of Publicly Available Data Sets.

Malaria is a deadly disease caused by Apicomplexan parasites of the Plasmodium genus. Several species of the Plasmodium genus are known to be infectious to humans, of which P. falciparum is the most virulent. Post-translational modifications (PTMs) of proteins coordinate cell signaling and hence regulate many biological processes in P. falciparum homeostasis and host infection, of which the most highly studied is phosphorylation. Phosphosites on proteins can be identified by tandem mass spectrometry (MS) performed on enriched samples (phosphoproteomics), followed by downstream computational analyses. We have performed a large-scale meta-analysis of 11 publicly available phosphoproteomics data sets to build a comprehensive atlas of phosphosites in the P. falciparum proteome, using robust pipelines aimed at strict control of false identifications. We identified a total of 26,609 phosphorylated sites on P. falciparum proteins, split across three categories of data reliability (gold/silver/bronze). We identified significant sequence motifs, likely indicative of different groups of kinases responsible for different groups of phosphosites. Conservation analysis identified clusters of phosphoproteins that are highly conserved and others that are evolving faster within the Plasmodium genus, and implicated in different pathways. We were also able to identify over 180,000 phosphosites within Plasmodium species beyond falciparum, based on orthologue mapping. We also explored the structural context of phosphosites, identifying a strong enrichment for phosphosites on fast-evolving (low conservation) intrinsically disordered regions (IDRs) of proteins. In other species, IDRs have been shown to have an important role in modulating protein-protein interactions, particularly in signaling, and thus warranting further study for their roles in host-pathogen interactions. All data have been made available via UniProtKB, PRIDE, and PeptideAtlas, with visualization interfaces for exploring phosphosites in the context of other data on Plasmodium proteins.

Individual Tree Crown Detection and Classification of Live and Dead Trees Using a Mask Region-Based Convolutional Neural Network (Mask R-CNN)

Mapping the distribution of living and dead trees in forests, particularly in ecologically fragile areas where forests serve as crucial ecological environments, is essential for assessing forest health, carbon storage capacity, and biodiversity. Convolutional neural networks, including Mask R-CNN, can assist in rapid and accurate forest monitoring. In this study, Mask R-CNN was employed to detect the crowns of Casuarina equisetifolia and to distinguish between live and dead trees in the Pingtan Comprehensive Pilot Zone, Fujian, China. High-resolution images of five plots were obtained using a multispectral Unmanned Aerial Vehicle. Six band combinations and derivatives, RGB, RGB-digital surface model (DSM), Multispectral, Multispectral-DSM, Vegetation Index, and Vegetation-Index-DSM, were used for tree crown detection and classification of live and dead trees. Five-fold cross-validation was employed to divide the manually annotated dataset of 21,800 live trees and 7157 dead trees into training and validation sets, which were used for training and validating the Mask R-CNN models. The results demonstrate that the RGB band combination achieved the most effective detection performance for live trees (average F1 score = 74.75%, IoU = 70.85%). The RGB–DSM combination exhibited the highest accuracy for dead trees (average F1 score = 71.16%, IoU = 68.28%). The detection performance for dead trees was lower than for live trees, which may be due to the similar spectral features across the images and the similarity of dead trees to the background, resulting in false identification. For the simultaneous detection of living and dead trees, the RGB combination produced the most promising results (average F1 score = 74.18%, IoU = 69.8%). It demonstrates that the Mask R-CNN model can achieve promising results for the detection of live and dead trees. Our study could provide forest managers with detailed information on the forest condition, which has the potential to improve forest management.

A rate-them-all lineup procedure increases information but reduces discriminability.

Prior research has investigated ways to optimize identification performance, but an open question concerns exactly what variable should be optimized. One reasonable way to optimize performance is to maximize discriminability, which is achieved by increasing correct identifications of guilty suspects while simultaneously decreasing false identifications of innocent suspects. Another reasonable way to optimize performance is to maximize the information about the guilt or innocence of the suspect, which is best achieved by ensuring that a confidence rating is always made to the suspect. In a typical lineup, however, limited information about the suspect is obtained if the witness picks a filler or rejects the lineup. One proposed solution to that problem is to have the witness provide a confidence rating to every member of the lineup (a rate-them-all lineup). But what effect, if any, does a rate-them-all procedure have on discriminability? To answer that question, we compared a rate-them-all lineup procedure to standard simultaneous lineup and showup procedures using receiver operating characteristic analysis. In terms of discriminability, the rate-them-all procedure was diagnostically inferior to both. A reasonable goal for future research is to make use of theoretical models of eyewitness identification to simultaneously maximize both discriminability and information gain. (PsycInfo Database Record (c) 2024 APA, all rights reserved).

Statistically sound identification of compounds by low-resolution GC-MS: Identification of tear agents in tear gas sprays

Gas-chromatography hyphenated with low-resolution mass spectrometry is a very flexible tool for the cost-effective identification and quantification of volatile compounds in complex matrices. In some analytical fields, criteria for the agreement between retention time and mass spectra of the analyte in calibrators and samples are defined based on the general understanding of the performance of these parameters. However, since this harmonization is not based on experimental performance observed for specific GC-MS conditions and analyte it leads to false identifications. This research proposes a novel and robust tool for defining statistically sound criteria for the identification of compounds by GC-MS and LC-MS using experimental data. The Monte Carlo Method (MCM) simulation of the correlated abundance of characteristic ions of analyte mass spectrum allows simulating the abundance ratio difference of the analyte in a calibrator and sample used for statistically sound identifications. The Cholesky decomposition of the covariance matrix of ion abundances for MCM simulations allows the reliable use of many ion abundance ratios in identifications. The developed methodology was implemented in a user-friendly Excel spreadsheet and applied to the identification of tear gas agents in tear gas sprays. Criteria defined by SANTE for identifying pesticide residues in foodstuffs were compared with the developed tool. The cross-validation of computational and SANTE tools allowed concluding that the statistical control of retention time and mass spectra performs according to the defined confidence level. On the other hand, the SANTE criteria can produce up to 92% false identifications for being too strict considering signal dispersion.

Electrothermal Modeling of Photovoltaic Modules for the Detection of Hot-Spots Caused by Soiling

Solar energy plays a major role in the transition to renewable energy. To ensure that large-scale photovoltaic (PV) power plants operate at their full potential, their monitoring is essential. It is common practice to utilize drones equipped with infrared thermography (IRT) cameras to detect defects in modules, as the latter can lead to deviating thermal behavior. However, IRT images can also show temperature hot-spots caused by inhomogeneous soiling on the module’s surface. Hence, the method does not differentiate between defective and soiled modules, which may cause false identification and economic and resource loss when replacing soiled but intact modules. To avoid this, we propose to detect spatially inhomogeneous soiling losses and model temperature variations explained by soiling. The spatially resolved soiling information can be obtained, for example, using aerial images captured with ordinary RGB cameras during drone flights. This paper presents an electrothermal model that translates the spatially resolved soiling losses of PV modules into temperature maps. By comparing such temperature maps with IRT images, it can be determined whether the module is soiled or defective. The proposed solution consists of an electrical model and a thermal model which influence each other. The electrical model of Bishop is used which is based on the single-diode model and replicates the power output or consumption of each cell, whereas the thermal model calculates the individual cell temperatures. Both models consider the given soiling and weather conditions. The developed model is capable of calculating the module temperature for a variety of different weather conditions. Furthermore, the model is capable of predicting which soiling pattern can cause critical hot-spots.

Exploration of Deep-Learning-Based Approaches for False Fact Identification in Social Judicial Systems

With the many applications of artificial intelligence (AI) in social judicial systems, false fact identification becomes a challenging issue when the system is expected to be more autonomous and intelligent in assisting a judicial review. In particular, private lending disputes often involve false facts that are intentionally concealed and manipulated due to unique and dynamic relationships and their nonconfrontational nature in the judicial system. In this article, we investigate deep learning techniques to identify false facts in loan cases for the purpose of reducing the judicial workload. Specifically, we adapt deep-learning-based natural language processing techniques to a dataset over 100 real-world judicial rules spanning four courts of different levels in China. The BERT (bidirectional encoder representations from transformers)-based classifier and T5 text generation models were trained to classify false litigation claims semantically. The experimental results demonstrate that T5 has a robust learning capability with a small number of legal text samples, outperforms BERT in identifying falsified facts, and provides explainable decisions to judges. This research shows that deep-learning-based false fact identification approaches provide promising solutions for addressing concealed information and manipulation in private lending lawsuits. This highlights the feasibility of deep learning to strengthen fact-finding and reduce labor costs in the judicial field.

Ultrasensitive Analysis of Escherichia coli O157:H7 Based on Immunomagnetic Separation and Labeled Surface-Enhanced Raman Scattering with Minimized False Positive Identifications.

It is a big challenge to monitor pathogens in food with high selectivity. In this study, we reported an ultrasensitive method for Escherichia coli O157:H7 detection based on immunomagnetic separation and labeled surface-enhanced Raman scattering (SERS). The bacterium was identified by heterogeneous recognition elements, monoclonal antibody (mAb), and aptamer. E. coli O157:H7 was separated and enriched by magnetic nanoparticles modified by mAb, and then a plasmonic nanostructure functionalized by aptamers with embedded Raman tags and interior gaps was utilized for further discrimination and detection. The selectivity was enhanced by two binding sites. The higher Raman enhancement was obtained by strong local electromagnetic field oscillation in the gap and the firm embedment of 4-mercaptopyridine (4-Mpy). Optimum experiments created that SERS signals of 4-Mpy at 1010 cm-1 had a good linearity with E. coli O157:H7 at a large range of 10 to 107 CFU/mL with a limit of detection of 2 CFU/mL. This method has great potential for on-site food pathogenic bacterial detection.

On-orbit satellite hierarchical anomaly detection using causal structure learning

Real-time anomaly detection for on-orbit satellites is crucial in the early identification of faults to prevent further anomaly expansion. However, current anomaly detection methods for on-orbit satellites face challenges such as low sensitivity to anomalies, high rates of false negatives, and a lack of criteria for assessing anomaly severity. The Spatio-Temporal Causal Graph (STCG) describes the intrinsic temporal and spatial relationships among telemetry parameters. By extracting temporal and spatial features, it facilitates enhanced modeling of normal data and improves the model’s sensitivity to anomalies. Moreover, according to the principle of anomaly propagation, the STCG can be utilized to identify false negatives. Therefore, we propose a framework of on-orbit satellite hierarchical anomaly detection using causal structure learning (OSHAD-CSL). This framework introduces a graph autoencoder for STCG learning and develops a method for dynamically setting detection thresholds. Additionally, the framework puts forward a false negative identification method based on the learned STCG. Lastly, the framework presents an anomaly severity judgment criterion, enabling the determination of the affected system level by the detected anomaly. To evaluate the effectiveness of the proposed framework, we validate the OSHAD-CSL on three public datasets and a dataset from a satellite’s attitude control system. The results demonstrate that the proposed method outperforms the baselines, with an F1-score (a metric used for evaluating the performance of anomaly detection) of 80% for anomaly detection and an accuracy of 83% for anomaly severity judgment. These findings highlight the efficacy of the proposed method in improving the performance of anomaly detection and severity assessment.

Prior familiarity enhances recognition memory of faces, not just images of faces, when accompanied by conceptual information.

A recent paper reported that recognition discriminability was improved for faces that were familiarized prior to study, but only if that familiarization protocol included conceptual information, like a name (Akan & Benjamin, Journal of Memory and Language,131, 104,433, 2023). In those experiments, familiarity with each facial identity was gained through exposures to the same facial image prior to study, and memory for each facial identity was tested using the same images across study and test. That design characteristic has a serious constraint on generality, since it is possible that prior conceptual information enhances memory for images (of faces), but not for the representation of the face itself. Here we evaluated whether this finding generalizes to a paradigm in which each exposure of a face is a novel image. In two experiments, faces were familiarized with orienting tasks that induced more perceptual or more conceptual processing prior to study and test phases. Results from recognition tests replicated the results from Akan and Benjamin (2023): (1) Discriminability was enhanced when prior familiarity involved conceptual processing but not when it involved perceptual processing, and (2) familiarity gained through either perceptual or conceptual processing led to an increase in both correct and false identifications. This successful replication in a design with exclusively novel images indicates that the discriminability advantage provided by conceptual familiarity goes beyond memory for facial images and applies to memory for faces. These findings have implications in practical contexts, such as eyewitness identification situations involving suspects who are previously known or familiar to the witness.

Taxonomic identification of Morocco scorpions using MALDI-MS fingerprints of venom proteomes and computational modeling

The venom of scorpions has been the subject of numerous studies. However, their taxonomic identification is not a simple task, leading to misidentifications. This study aims to provide a practical approach for identifying scorpions based on the venom molecular mass fingerprint (MFP). Specimens (251) belonging to fifteen species were collected from different regions in Morocco. Their MFPs were acquired using MALDI-MS. These were used as a training dataset to generate predictive models and a library of mean spectral profiles using software programs based on machine learning. The computational model achieved an overall recognition capability of 99 % comprising 32 molecular signatures. The models and the library were tested using a new dataset for external validation and to evaluate their capability of identification. We recorded an accuracy classification with an average of 97 % and 98 % for the computational models and the library, respectively. To our knowledge, this is the first attempt to demonstrate the potential of MALDI-MS and MFPs to generate predictive models capable of discriminating scorpions from family to species levels, and to build a library of species-specific spectra. These promising results may represent a proof of concept towards developing a reliable approach for rapid molecular identification of scorpions in Morocco. Significance of the studyWith their clinical importance, scorpions may constitute a desirable study model for many researchers. The first step in studying scorpion is systematically identifying the species of interest. However, it can be a difficult task, especially for the non-experts. The taxonomy of scorpions is primarily based on morphometric characters. In Morocco, the high number of species and subspecies mainly endemic, and the morphological similarities between different species may result in false identifications. This was observed in many reports according to the scorpion experts. In this study, we describe a reliable practical approach for identifying scorpions based on the venom molecular mass fingerprints (MFPs). By using two software programs based on machine learning, we have demonstrated that these MFPs contains sufficient inter-specific variation to differentiate between the scorpion species mentioned in this study with a good accuracy. Using a drop of venom, this new approach could be a rapid, accurate and cost saving method for taxonomic identification of scorpions in Morocco.

Identifying noise transients in gravitational-wave data arising from nonlinear couplings

Abstract Noise in various interferometer systems can sometimes couple non-linearly to create excess noise in the gravitational wave (GW) strain data. Third-order statistics, such as bicoherence and biphase, can identify these couplings and help discriminate those occurrences from astrophysical GW signals. However, the conventional analysis can yield large bicoherence values even when no phase-coupling is present, thereby, resulting in false identifications. Introducing artificial phase randomization in computing the bicoherence reduces such occurrences with negligible impact on its effectiveness for detecting true phase-coupled disturbances. We demonstrate this property with simulated disturbances – focusing only on short-duration ones (lasting up to a few seconds) in this work. Statistical hypothesis testing is used for distinguishing phase-coupled disturbances from non-phase coupled ones when employing the phase-randomized bicoherence. We also obtain an expression for the bicoherence value that minimizes the sum of the probabilities of false positives and false negatives. This can be chosen as a threshold for shortlisting bicoherence triggers for further scrutiny for the presence of non-linear coupling. Finally, the utility of the phase-randomized bicoherence analysis in GW time-series data is demonstrated for the following three scenarios: (1) Finding third-order statistical similarities within categories of noise transients, such as blips and koi fish. If these non-Gaussian noise transients, or glitches, have a common source, their bicoherence maps can have similarities arising from common bifrequencies related to that source. (2) Differentiating linear or non-linear phase-coupled glitches from compact binary coalescence signals through their bicoherence maps. This is explained with a simulated signal. (3) Identifying repeated bifrequencies in the second and third observation runs (i.e., O2 and O3) of LIGO and Virgo.

Detecting causalities between strongly coupled dynamical systems

A new version of the convergent cross mapping is proposed to detect causalities from records for strongly coupled nonlinear dynamical systems, where the mutual entropy is used to measure nonlinear correlations, and the time delay stability is adopted to filter out false identifications. Calculations on various deterministic dynamic systems show that it is applicable not only to strongly coupled systems but also to non-interacting systems influenced by a common environment. Compared with the original version of convergent cross mapping, under strong couplings our proposed method has significantly higher accuracy, and is more robust to coupling strength. As a typical example, it is used to detect the causal effects between arterial blood pressure (ABP) and intracranial pressure (ICP) of patients diagnosed with traumatic brain injury (TBI). A mono-directional causality from ICP to ABP is identified.

Research on Lightweight Rice False Smut Disease Identification Method Based on Improved YOLOv8n Model

In order to detect rice false smut quickly and accurately, a lightweight false smut detection model, YOLOv8n-MBS, was proposed in this study. The model introduces the C2f_MSEC module to replace C2f in the backbone network for better extraction of key features of false smut, enhances the feature fusion capability of the neck network for different sizes of false smut by using a weighted bidirectional feature pyramid network, and designs a group-normalized shared convolution lightweight detection head to reduce the number of parameters in the model head to achieve model lightweight. The experimental results show that YOLOv8n-MBS has an average accuracy of 93.9%, a parameter count of 1.4 M, and a model size of 3.3 MB. Compared with the SSD model, the average accuracy of the model in this study increased by 4%, the number of parameters decreased by 89.8%, and the model size decreased by 86.9%; compared with the YOLO series of YOLOv7-tiny, YOLOv5n, YOLOv5s, and YOLOv8n models, the YOLOv8n-MBS model showed outstanding performance in terms of model accuracy and model performance detection; compared to the latest YOLOv9t and YOLOv10n models, the average model accuracy increased by 2.8% and 2.2%, the number of model parameters decreased by 30% and 39.1%, and the model size decreased by 29.8% and 43.1%, respectively. This method enables more accurate and lighter-weight detection of false smut, which provides the basis for intelligent management of rice blast disease in the field and thus promotes food security.

High-resolution quadrupole improves spectral purity and reduces interference from non-target ions in isobaric multiplexed quantitative proteomics

BackgroundMass spectrometry (MS)-based proteomics is a powerful tool for identifying and quantifying proteins. However, chimeric spectra caused by the fragmentation of multiple precursors within the same isolation window impair the accuracy of peptide identification and isobaric mass tag-based quantification. While there have been advances in computational deconvolution of chimeric spectra and methods to further separate the peptides by ion mobility or through MSn, the use of narrower isolation windows to decrease the fraction of chimeric species remains to be fully explored. ResultsWe present results obtained on a SCIEX TripleTOF instrument where the quadrupole was optimized and tuned for precursor isolation at 0.1 Da (FWHH). Using a three-proteome model (trypsin digest of protein lysates from yeast, human and E. coli) and 8-plex iTRAQ labeling to document the interference effect, we investigated the impact of co-fragmentation on spectral purity, identification accuracy and quantification accuracy. The narrow quadrupole isolation window significantly improved the spectral purity and reduced the interference of non-target precursors on quantification accuracy. The high-resolution isolation strategy also reduced the number of false identifications caused by chimeric spectra. While these improvements came at the cost of sensitivity loss, combining high-resolution isolation with other advanced techniques, including ion mobility, may result in improved accuracy in identification and quantification. SignificanceCompared to standard-resolution quadrupole isolation (0.7 Da), high-resolution quadrupole isolation (0.1 Da) significantly improved the spectral purity and quantification accuracy while reducing the number of potential false identifications caused by chimeric spectra, thus showing excellent potential for further development to analyze clinical proteomics samples, for which high accuracy is essential.

Challenges in Lipidomics Biomarker Identification: Avoiding the Pitfalls and Improving Reproducibility.

Identification of features with high levels of confidence in liquid chromatography-mass spectrometry (LC-MS) lipidomics research is an essential part of biomarker discovery, but existing software platforms can give inconsistent results, even from identical spectral data. This poses a clear challenge for reproducibility in biomarker identification. In this work, we illustrate the reproducibility gap for two open-access lipidomics platforms, MS DIAL and Lipostar, finding just 14.0% identification agreement when analyzing identical LC-MS spectra using default settings. Whilst the software platforms performed more consistently using fragmentation data, agreement was still only 36.1% for MS2 spectra. This highlights the critical importance of validation across positive and negative LC-MS modes, as well as the manual curation of spectra and lipidomics software outputs, in order to reduce identification errors caused by closely related lipids and co-elution issues. This curation process can be supplemented by data-driven outlier detection in assessing spectral outputs, which is demonstrated here using a novel machine learning approach based on support vector machine regression combined with leave-one-out cross-validation. These steps are essential to reduce the frequency of false positive identifications and close the reproducibility gap, including between software platforms, which, for downstream users such as bioinformaticians and clinicians, can be an underappreciated source of biomarker identification errors.

False Data Injection Attack Detection, Isolation, and Identification in Industrial Control Systems Based on Machine Learning: Application in Load Frequency Control

The integration of advanced information and communication technology in smart grids has exposed them to increased cyber attacks. Traditional model-based fault detection systems rely on mathematical models to identify malicious activities but struggle with the complexity of modern systems. This paper explores the application of artificial intelligence, specifically machine learning, to develop fault detection mechanisms that do not depend on these models. We focus on operational technology for fault detection, isolation, and identification (FDII) within smart grids, specifically examining a load frequency control (LFC) system. Our proposed approach uses sensor data to accurately identify threats, demonstrating promising results in simulated environments.

Use & Abuse of Personal Information, Part II: Robust Generation of Fake IDs for Privacy Experimentation

When personal information is shared across the Internet, we have limited confidence that the designated second party will safeguard it as we would prefer. Privacy policies offer insight into the best practices and intent of the organization, yet most are written so loosely that sharing with undefined third parties is to be anticipated. Tracking these sharing behaviors and identifying the source of unwanted content is exceedingly difficult when personal information is shared with multiple such second parties. This paper formulates a model for realistic fake identities, constructs a robust fake identity generator, and outlines management methods targeted towards online transactions (email, phone, text) that pass both cursory machine and human examination for use in personal privacy experimentation. This fake ID generator, combined with a custom account signup engine, are the core front-end components of our larger Use and Abuse of Personal Information system that performs one-time transactions that, similar to a cryptographic one-time pad, ensure that we can attribute the sharing back to the single one-time transaction and/or specific second party. The flexibility and richness of the fake IDs also serve as a foundational set of control variables for a wide range of social science research questions revolving around personal information. Collectively, these fake identity models address multiple inter-disciplinary areas of common interest and serve as a foundation for eliciting and quantifying personal information-sharing behaviors.

COTTON-YOLO: Enhancing Cotton Boll Detection and Counting in Complex Environmental Conditions Using an Advanced YOLO Model

This study aims to enhance the detection accuracy and efficiency of cotton bolls in complex natural environments. Addressing the limitations of traditional methods, we developed an automated detection system based on computer vision, designed to optimize performance under variable lighting and weather conditions. We introduced COTTON-YOLO, an improved model based on YOLOv8n, incorporating specific algorithmic optimizations and data augmentation techniques. Key innovations include the C2F-CBAM module to boost feature recognition capabilities, the Gold-YOLO neck structure for enhanced information flow and feature integration, and the WIoU loss function to improve bounding box precision. These advancements significantly enhance the model’s environmental adaptability and detection precision. Comparative experiments with the baseline YOLOv8 model demonstrated substantial performance improvements with COTTON-YOLO, particularly a 10.3% increase in the AP50 metric, validating its superiority in accuracy. Additionally, COTTON-YOLO showed efficient real-time processing capabilities and a low false detection rate in field tests. The model’s performance in static and dynamic counting scenarios was assessed, showing high accuracy in static cotton boll counting and effective tracking of cotton bolls in video sequences using the ByteTrack algorithm, maintaining low false detections and ID switch rates even in complex backgrounds.

Condition‐based maintenance management for two‐stage continuous deterioration with two‐dimensional inspection errors

AbstractInspections often perform imperfect outcomes during maintenance processes owing to human errors, management issues and other limitations. In particular, such imperfection affects the maintenance management of multistage deterioration significantly due to both false state identification and measurement errors, whose quantitative analysis, however, is seldom reported in the literature. To fill these gaps, this paper devises a condition‐based maintenance management strategy oriented to two‐stage continuous degradation under two‐dimensional inspection imperfection. Specifically, a threshold‐based replacement is executed under the normal‐working state if the detected degradation value exceeds the preset limit; additionally, preventive replacement is immediately performed once the defective state is identified. Notably, the detection outcome rather than the actual working condition decides how preventive maintenance operates. The long‐run cost rate is minimized via the optimization of the inspection cycle and replacement limit. Besides, numerical experiments conducted on train bogie bearing are provided, showing substantial superiorities over cost‐effectiveness promotion and performance improvement.