Extraordinary Transmission Research Articles

Tunable nonreciprocal transmission based on non-Hermitian optical system with magnetic optical materials in a one-dimensional multilayer structure

In this study, a one-dimensional composite structure composed of a PT-symmetric system and magnetic optical (MO) materials is designed. The nonreciprocal propagation of a one-dimensional multilayer structure is investigated both theoretically and numerically based on the transfer matrix theory. Different from the single nonreciprocal frequency in the parity-time (PT) system, two adjacent band gaps are changed into a pair of nonreciprocal bands under the effect of MO materials and a PT system above the PT exceptional point, and extraordinary transmissions are inspired in some nonreciprocal frequencies. At the same time, the nonreciprocal propagation bands can be tuned based on the different choices of external magnetic field directions. Furthermore, with an increase in the gain/loss factor, the two nonreciprocal band gaps both disappear and form two bands with an extraordinary transmission at certain frequencies. Such peculiar properties in the composite structure may have broad potential applications in communication and integration devices.

Optical Transmission Plasmonic Color Filter with Wider Color Gamut Based on X-Shaped Nanostructure

Extraordinary Optical Transmission Plasmonic Color Filters (EOT-PCFs) with nanostructures have the advantages of consistent color, small size, and excellent color reproduction, making them a suitable replacement for colorant-based filters. Currently, the color gamut created by plasmonic filters is limited to the standard red, green, blue (sRGB) color space, which limits their use in the future. To address this limitation, we propose a surface plasmon resonance (SPR) color filter scheme, which may provide a RGB-wide color gamut while exceeding the sRGB color space. On the surface of the aluminum film, a unique nanopattern structure is etched. The nanohole functions as a coupled grating that matches photon momentum to plasma when exposed to natural light. Metals and surfaces create surface plasmon resonances as light passes through the metal film. The plasmon resonance wavelength can be modified by modifying the structural parameters of the nanopattern to obtain varied transmission spectra. The International Commission on Illumination (CIE 1931) chromaticity diagram can convert the transmission spectrum into color coordinates and convert the spectrum into various colors. The color range and saturation can outperform existing color filters.

Integrated optics spiral photoconductive antennas coupled with 1D and 2D micron-size terahertz-wavelength plasmonic metal arrays

Terahertz (THz) photoconductive antenna (PCA) emitters having one-dimensional (1D) and two-dimensional (2D) micron-size metal line arrays (MLA's) at the transmission side of the semi-insulating GaAs substrate were fabricated via UV photolithography and electron beam deposition. At a fluence of ∼1.2 mJ/cm2 and 20 VPP bias, the enhancement in the THz signal peak-to-peak amplitudes are ∼6 times for 1D MLA and ∼11 times for 2D MLA, compared to the reference PCA, respectively. An all-optical effect via THz extraordinary transmission is conjectured for the enhancement mechanism. This metamaterial PCA design presents a feasible, yet more cost-effective alternative to photo-conducting gap nanostructure fabrication using e-beam lithography.

Hybrid TM/TE Cylindrical Leaky Waves: Electromagnetic Radiation at Broadside From Radially Periodic Structures

The nature of broadside radiation from planar, radially periodic structures excited at the center is investigated in this article by considering an annular microstrip antenna operating in the microwave range. This kind of antenna, capable of radiating either a scanned conical pattern or a broadside pencil beam, is typically designed by enforcing that its linearized version supports a single TM leaky mode. However, a single TM cylindrical leaky wave is known to be incapable of radiating a directive broadside beam. To solve the conundrum, a generalized pencil-of-function analysis of the exciting field is performed. It is found that a nonnegligible TE component is present, which exhibits a radial decay different from the TM component but the same complex radial wavenumber. Based on the geometrical symmetries of the structure, an electromagnetic model for the surface currents excited on the annular microstrips is developed and validated by full-wave results for both the currents and the associated radiation patterns. The generality of the adopted approach sheds new light on the nature of the electromagnetic field radiated at broadside by the general class of annular, radially periodic structures, including novel terahertz antennas and plasmonic structures used for achieving extraordinary transmission at optical frequencies.

Nonlinearly tunable extraordinary optical transmission in a hybird metamaterial

Dielectric metamaterials are promising for significantly enhanced optical nonlinearity for their strongly localized Mie-resonant mode. Here, we theoretically and experimentally studied a hybrid metamaterial exhibiting extraordinary optical transmission (EOT) behavior, in which the transmission amplitude and frequency can be modulated. The EOT of the perforated metal sheet with subwavelength aperture is induced with a dielectric cuboid by setting them in a close proximity and exploiting the first-order Mie-resonant mode. The electromagnetic wave is effectively coupled to the subwavelength aperture by properly placing the dielectric cuboid, and the transmission intensity can be enhanced more than 150 times. Meanwhile, we employed the nonlinear effect of the dielectric cuboid to modulate the operation band of the EOT. Hopefully, our work can inspire innovations for the research of light–matter interactions, electromagnetic light switching devices and filter devices.

A theoretical study of broadband extraordinary optical transmission in gold plasmonic square nanohole arrays and its application on refractive index sensor

A theoretical study of broadband extraordinary optical transmission in gold plasmonic square nanohole arrays and its application on refractive index sensor

Single-Step Fabrication of High-Performance Extraordinary Transmission Plasmonic Metasurfaces Employing Ultrafast Lasers.

Plasmonic metasurfaces based on the extraordinary optical transmission (EOT) effect can be designed to efficiently transmit specific spectral bands from the visible to the far-infrared regimes, offering numerous applications in important technological fields such as compact multispectral imaging, biological and chemical sensing, or color displays. However, due to their subwavelength nature, EOT metasurfaces are nowadays fabricated with nano- and micro-lithographic techniques, requiring many processing steps and carrying out in expensive cleanroom environments. In this work, we propose and experimentally demonstrate a novel, single-step process for the rapid fabrication of high-performance mid- and long-wave infrared EOT metasurfaces employing ultrafast direct laser writing. Microhole arrays composing extraordinary transmission metasurfaces were fabricated over an area of 4 mm2 in timescales of units of minutes, employing single pulse ablation of 40 nm thick Au films on dielectric substrates mounted on a high-precision motorized stage. We show how by carefully characterizing the influence of only three key experimental parameters on the processed micro-morphologies (namely, laser pulse energy, scan velocity, and beam shaping slit), we can have on-demand control of the optical characteristics of the extraordinary transmission effect in terms of transmission wavelength, quality factor, and polarization sensitivity of the resonances. To illustrate this concept, a set of EOT metasurfaces having different performances and operating in different spectral regimes has been successfully designed, fabricated, and tested. Comparison between transmittance measurements and numerical simulations has revealed that all the fabricated devices behave as expected, thus demonstrating the high performance, flexibility, and reliability of the proposed fabrication method. We believe that our findings provide the pillars for mass production of EOT metasurfaces with on-demand optical properties and create new research trends toward single-step laser fabrication of metasurfaces with alternative geometries and/or functionalities.

Enhanced extraordinary terahertz transmission through coupling between silicon resonators.

By using Mie resonance coupling effects, low-loss silicon particles as receiving or transmitting antennas can strongly localize the electromagnetic field. Enhanced extraordinary optical transmission (EEOT) is generated by placing two such silicon particles symmetrically on both sides of subwavelength hole arrays in the terahertz (THz) region. When the hole radius r is 17 times smaller than the resonance wavelength λ (r/λ = 0.06), the enhancement factors of the resonator–hole and the resonator–resonator coupling structures are 154- and 629-fold compared to that of the hole-only structure, respectively. The current distribution, magnetic field and Poynting vector are numerically simulated to reveal the mechanism of the proposed structure. Moreover, the Mie resonance coupling and the induced THz EEOT can be tuned in a wide frequency range. Our results provide a reference for the miniaturization of THz systems.

Реализация физических подходов к конструированию функциональных металлодиэлектрических систем на основе опалов в фотонике

The possibilities of practical implementation of physical approaches to the design of metal-dielectric photonic crystal systems based on opals, which allow controlling the propagation of electromagnetic waves, are shown. The implemented approaches are based on the effects of excitation of surface plasmon-polaritons capable of propagating along the metal-dielectric interface in plasmonic-photonic layered heterostructures, and modification of the photonic-energy structure of the nanocomposite as a result of dispersion of silver in the opal matrix. Experimental results are presented indicating the occurrence of extraordinary transmission and absorption of light in plasmonic-photonic heterostructures, as well as the asymmetric shape of curves in the reflection spectra of nanocomposites, which is associated with the Fano resonance.

Physical approaches to the design of functional metal-dielectric systems based on opals in photonics

The possibilities of practical implementation of physical approaches to the design of metal-dielectric photonic crystal systems based on opals, which allow controlling the propagation of electromagnetic waves, are shown. The implemented approaches are based on the effects of excitation of surface plasmon-polaritons capable of propagating along the metal-dielectric interface in plasmonic-photonic layered heterostructures, and modification of the photonic-energy structure of the nanocomposite as a result of dispersion of silver in the opal matrix. Experimental results are presented indicating the occurrence of extraordinary transmission and absorption of light in plasmonic-photonic heterostructures, as well as the asymmetric shape of curves in the reflection spectra of nanocomposites, which is associated with the Fano resonance. Keywords: photonic crystals, opals, surface plasmon-polaritons, metal-dielectric systems, Fano resonance.

Engineering the Optical Response of the Novel Plasmonic Binary Nanohole Array

The phenomenon of extraordinary optical transmission (EOT) due to its advantages has been considered by researchers in various applications, and in recent years, many efforts have been made to engineer these structures to get the best possible response for desired applications. In this work, the optical properties of novel binary gold nanohole arrays are investigated theoretically. We engineered the optical response of the system by adjusting the ratio of contribution of surface plasmon polariton (SPP) to localized surface plasmon resonance (LSPR) through the manipulation of the geometrical properties. The changes in the topology of this nanohole array affected the intensity and the wavelength of transmission peaks. The sensitivity of the optical response to the refractive index was also investigated. The designed structure is a good candidate for use as a polarization-independent optical label-free sensor.

Extraordinary optical transmission in silicon nanoholes

In this work, for the first time, a study was conducted of the existence of Extraordinary Optical Transmission (EOT) in Silicon (Si) thin films with subwavelength holes array and high excess carrier concentration. Typically EOT is studied in opaque perforated metal films. Using Si would bring EOT and its many applications to the silicon photonics realm and the mid-IR range. Since Si thin film is a semi-transparent film in mid-IR, a generalization was proposed of the normalized transmission metric used in literature for EOT studies in opaque films. The plasma dispersion effect was introduced into the studied perforated Si film through either doping or carriers’ generation. Careful consideration for the differences in optical response modeling in both cases was given. Full-wave simulation and analysis showed an enhanced transmission when using Si with excess carriers, mimicking the enhancement reported in perforated metallic films. EOT was found in the mid-IR instead of the visible range which is the case in metallic films. The case of Si with generated excess carriers showed a mid-IR EOT peak reaching 157% around 6.68 µm, while the phosphorus-doped Si case showed a transmission enhancement of 152% around 8.6 µm. The effect of varying the holes’ dimensions and generated carriers’ concentration on the transmission was studied. The analogy of the relation between the fundamental mode cutoff and the EOT peak wavelength in the case of Si to the case of metal such as silver was studied and verified. The perforated Si thin film transmission sensitivity for a change in the refractive index of the holes and surroundings material was investigated. Also, a study of the device potential in sensing the hole and surroundings materials that have almost the same refractive index yet with different absorption fingerprints was performed as well.

Simulation of Solar Cells with Integration of Optical Nanoantennas.

The evolution of nanotechnology has provided a better understanding of light-matter interaction at a subwavelength scale and has led to the development of new devices that can possibly play an important role in future applications. Nanoantennas are an example of such devices, having gained interest in recent years for their application in the field of photovoltaic technology at visible and infrared wavelengths, due to their ability to capture and confine energy of free-propagating waves. This property results from a unique phenomenon called extraordinary optical transmission (EOT) where, due to resonant behavior, light passing through subwavelength apertures in a metal film can be transmitted in greater orders of magnitude than that predicted by classical theories. During this study, 2D and 3D models featuring a metallic nanoantenna array with subwavelength holes coupled to a photovoltaic cell are simulated using a Finite Element Tool. These models present with slight variations between them, such as the position of the nanoantenna within the structure, the holes’ geometry and the type of cell, in order to verify how its optical response is affected. The results demonstrate that the coupling of nanoantennas to solar cells can be advantageous and improve the capture and absorption of radiation. It is concluded that aperture nanoantennas may concentrate radiation, meaning that is possible to tune the electric field peak and adjust absorption on the main layers. This may be important because it might be possible to adjust solar cell performance to the global regions’ solar spectrum by only adjusting the nanoantenna parameters.

Tunable Extraordinary Optical Transmission with Graphene in Terahertz

Tunable extraordinary optical transmission (EOT) with graphene is realized using a novel metallic ring–rod nested structure in the terahertz frequency regime. The generated double-enhanced transmission peaks primarily originate from the excitation of localized surface plasmon resonances (LSPRs). On using graphene, the resonating surface plasmon distribution changes in the reaction plane, which disturbs the generation of LSPRs. By regulating the Fermi energy (Ef) of the graphene to reach a certain level, an adjustment from bimodal EOT to unimodal EOT is obtained. As the Ef of the graphene integrated beneath the rod increases to 0.5 eV, the transmittance of the peak at 2.42 THz decreases to 6%. Moreover, the transmission peak at 1.77 THz virtually disappears due to the Ef increasing to 0.7 eV when the graphene is placed beneath the ring. The significant tuning capabilities of the bimodal EOT indicate its promising application prospects in frequency-selective surfaces, communication, filtering, and radar.

Giant Extra-Ordinary Near Infrared Transmission from Seemingly Opaque Plasmonic Metasurface: Sensing Applications.

In the present study, we report giant extra-ordinary transmission of near infrared (NIR) light, more than 90%, through a seemingly opaque plasmonic metasurface, which consists of two metal nano-slits arrays (MNSAs) with alternate opening arrangements. By using perfect coupling of the plasmonic modes formed between the sharp edges of the upper and lower MNSAs of silver, a giant, wavelength selective transmission could be obtained. The study is accompanied by optimization of electromagnetic (EM) field coupling for different interlayer spacings and lateral overlap between the two MNSAs to understand their significance in light transmission through the metasurface. The interlayer spacing between the MNSAs works as the transmitting channel for light. The optimization of performance with different fill factors and plasmonic metals was performed as well. Because of the excitation of extended surface plasmons (ESPs) generated at both the MNSAs, the metasurface can be used for refractive index (RI) sensing as one of its applications by using a transparent and flexible polymer, such as polydimethylsiloxane (PDMS), as substrate. The maximum sensitivity which could be achieved for the optimal configuration of the metasurface was 1435.71 nm/RIU, with a figure of merit (FOM) of 80 RIU−1 for 90.45% optical transmission of light for the refractive index variation of analyte medium from 1.33 to 1.38 RIU. The present study strengthens the concept of light funneling through subwavelength structures due to plasmons, which are responsible for light transmission through this seemingly opaque metasurface and finds use in highly sensitive, flexible, and cost-effective EOT-based sensors.

Multifunctional Waterborne Acoustic Metagratings: From Extraordinary Transmission to Total and Abnormal Reflection

Wavelength-thick multifunctional metagratings for waterborne sound are highly desirable in various application scenarios, such as human health monitoring and ocean exploration. In this article, we present a class of metagratings with which distinct and switchable wave manipulation functionalities, such as extraordinary transmission, total reflection, and abnormal reflection can be achieved through a single acoustic grating. Simultaneous and high-efficiency control over both reflected and transmitted waves is achieved through a systematic design approach in which wave diffraction theory, effective medium theory, and intelligent optimization algorithms are concurrently utilized. Switching between different functionalities can be achieved simply by changing the operation frequency, or by changing the incident angles. Robust and perfect wave-front manipulation effects are obtained over a wide range of incident angles and operation frequencies. Our work not only provides a design paradigm of planar acoustic devices for multiple manipulation purposes, but also presents a feasible solution for the development of integrated acoustic devices for distinct underwater applications.

Extraordinary transmission in an add-drop filter configuration driven by nonconservative coupling.

We proposed a nonconservative coupling scheme based on the add-drop filter configuration, in which a high Q factor passive microtoroid resonator is indirectly driven by an active unit, thus providing an additional coupling which might be comparable to a mode decay rate. Extraordinary scattering points are predicted when one of the supermodes becomes lossless. Specifically, when the inherent coupling strength is set at half of the mode's total decay rate, controllable transmission peaks can be realized by tuning the nonconservative coupling strength and phase delay. Our theoretic research might find potential application in tunable light steering based on non-Hermitian resonator systems.

Extraordinary transmission of gold-capped sphere arrays in mid-infrared range.

We report an extraordinary transmission (EOT) of gold-capped silica microsphere monolayers in the mid-infrared range of 5-25 μm. The observed transmittance is significantly greater than that of a flat gold film with the same thickness, although the surface of the microsphere monolayer appeared to be completely covered with gold when observing from above. The calculations based on the finite difference time domain method indicate that light passes through the openings between the gold coating on the substrate and that on the microspheres. The EOT-type studied here occurs over the mid-infrared wavelength range, thus indicating that it is not attributable to the resonance of the surface plasmons. This type of EOT is absent in the visible and near infrared wavelength range, where gold does not function as an ideal metal. In addition, spectral modification originating from localized phonon polariton resonance (LPhPR) in silica microsphere is observed. LPhPR can be interpreted based on the analogy of the localized surface plasmon resonance in metallic nanospheres, in the visible or ultraviolet wavelength range.

Fibre-Optic Surface Plasmon Resonance Biosensor for Monoclonal Antibody Titer Quantification.

An extraordinary optical transmission fibre-optic surface plasmon resonance biosensing platform was engineered to improve its portability and sensitivity, and was applied to monitor the concentrations of monoclonal antibodies (Mabs). By refining the fabricating procedure and changing the material of the flow cell and the components of the optical fibre, the biosensor is portable and robust to external interference. After the implementation of an effective template cleaning procedure and precise control during the fabrication process, a consistent sensitivity of 509 ± 5 nm per refractive index unit (nm/RIU) was achieved. The biosensor can detect the Mab with a limit of detection (LOD) of 0.44 µg/mL. The results show that the biosensor is a potential tool for the rapid quantification of Mab titers. The biosensor can be regenerated at least 10 times with 10 mM glycine (pH = 2.5), and consistent signal changes were obtained after regeneration. Moreover, the employment of a spacer arm SM(PEG)2, used for immobilising protein A onto the gold film, was demonstrated to be unable to improve the detecting sensitivity; thus, a simple procedure without the spacer arm could be used to prepare the protein A-based biosensor. Our results demonstrate that the fibre-optic surface plasmon resonance biosensor is competent for the real-time and on-line monitoring of antibody titers in the future as a process analytical technologies (PATs) tool for bioprocess developments and the manufacture of therapeutic antibodies.

Effects of metallic underlayer on SERS performance of a metal film over nanosphere metasurface

Metal film over nanosphere (MFON) metasurfaces have numerous applications, specifically as nanosensors for bio and chemical detection. Additionally, their interesting optical properties have also attracted the attention of many research groups. In this work, we study the influence of the metallic underlayer on the surface-enhanced Raman scattering (SERS) effect of the MFON structure. Two sets of MFON on silicon and mirror substrates were prepared for SERS measurement with rhodamine 6G. Experimental results show that the mirror layer boosts the SERS signal by two to five times. Finite difference time domain simulation was performed to gain insights into this improvement. Numerical results show that metallic underlayer helps to increase the concentration of the electric field at the hot spots. Moreover, it reflects the Raman signal via the extraordinary optical transmission channel of the MFON structure, improving the back-scattered Raman signal collection efficiency. Both of these effects can contribute to the increase of the SERS signal in agreement with the experimental results. More importantly, it provides an additional tool to tailor the optical properties of MFON metasurfaces.