Extraction Sockets Research Articles

Clinical Effectiveness of Green Tea Extracts as a Local Haemostatic Agent Following Mandibular Molar Extraction.

To determine the clinical effectiveness of different green tea extracts (GTEs) in reducing bleeding after extraction of mandibular molars. Randomised controlled trial. Place and Duration of the Study: College of Dentistry, King Khalid University, Abha, Saudi Arabia, from October to December 2022. A total of 64 patients were selected from those who attended dental clinics at the College of Dentistry, King Khalid University for extraction of their mandibular molars. They were equally and randomly divided into a control and three test groups by asking the patient to choose a numbered piece of paper. In the first group, normal saline-soaked sterile gauze was used after the tooth extraction while in the three test groups, different GTEs (methanolic GTE, aqueous GTE, and tannin isolated from the green tea) were applied. Monitoring of the bleeding by observing the extraction socket was carried out at regular intervals of five minutes until the oozing subsided, and then once an hour after that. Each group had 16 patients. The mean of bleeding stop-minutes was significantly different among the groups (61.56 minutes for the control group, 7.50 minutes 8.44 minutes and 5.62 minutes for the test groups, p <0.001). The median of bleeding stop-minutes of the control group was significantly higher than all test groups (p <0.001). The number of patients in whom bleeding was continued one hour after surgery was significantly higher in the control group (p = 0.005). Moreover, tannin has the greatest haemostatic effect compared to aqueous and methanolic GTEs. Significant haemostatic effect has been shown by all GTEs. Tannin isolated from green tea has shown a significantly higher haemostatic effect than to the aqueous and methanolic extracts. Bleeding, Green tea extracts, Haemostasis, Tannin isolate, Molar extraction.

THE PARTIAL EXTRACTION THERAPIES:ROOT MEDIATED RIDGE PRESERVATION IN RESTORATIVE AND IMPLANT DENTISTRY

Crestal bone loss, a decrease in the edentulous ridges width, and a decrease in the height of the interdental papillae are all possible outcomes of extraction. It is commonly known that alveolar bone volume decreases following tooth extraction. Following tooth extraction, the bundle bone-periodontal ligament complex [BB-PDL complex] is lost, which results in the loss of alveolar bone and ridge shape. Compared to the palatal and lingual cortical plates, the buccal cortical plate is thinner and has four times as much residual ridge resorption. Numerous methods for preserving ridges have been suggested in the literature. By preserving the buccal bone-periodontal complexs vascular supply, partial extraction procedures have been shown to stop buccal bone loss. Techniques such as root submergence, socket shield, proximal socket shield, and pontic shield are examples of partial extraction therapy. This method maintains the ridge contour and the loss of alveolar bone. To replicate the future pontic, the coronal root is hollowed out and the tooth is decoronated at the level of the bone crest using the root submergence procedure. When planning a pontic location underneath a traditional fixed partial denture, the root submergence approach is recommended. The tooth root is divided into the palatal and facial portions longitudinally in the socket shield procedure. The long-shank dental bur has a little concavity in the facial root. Pontic shielding entails the same preparation as extraction socket grafting using a slow-resorbing bone replacement. By preserving the periodontal ligament and the blood vessels that are connected to it, these procedures highlight the long-term effectiveness of implants and are anticipated to produce better aesthetic results. Thus, by stopping the buccal bones natural bone resorption and the soft tissues that cover it from contracting. The review of several partial extraction therapy approaches is the main focus of this article.

Alveolar Ridge Regeneration With Open Versus Closed Healing in Damaged Extraction Sockets: A Preclinical InVivo Study.

The objective of this study was to compare open versus closed healing of soft and hard tissue following alveolar ridge preservation (ARP) procedures in damaged extraction sockets. ARP was performed in five mongrel dogs using collagenated deproteinized bovine bone mineral (cDBBM) and a resorbable non-cross-linked collagen membrane (NCCM) in damaged extraction sockets, with each socket entrance left either open (open group) or closed (closed group). Clinical wound epithelization at the socket entrance and the dimensions of keratinized tissue were evaluated over time. Additionally, the augmented ridge dimensions and new bone formation were assessed radiographically and histologically at 8 weeks after surgery. The dimensions of the socket entrance gradually decreased in the open group, and wound epithelization was almost complete within 4 weeks. The mucogingival junction was maintained more apically in the open group than in the closed group (0.14 ± 0.40 mm vs. -0.86 ± 0.71 mm [mean ± SD], p < 0.05). The augmented ridge dimensions did not differ significantly between the open and closed groups (93.1% ± 5.4% vs. 88.3% ± 11.2%, p > 0.05). Histological analyses revealed no significant differences in the amount of newly formed bone. However, membrane resorption in the crestal region was more pronounced in the open group. Open and closed healing approaches for ARP in extraction sockets with damaged buccal wall resulted in similar ridge dimensions and new bone formation. However, there was less reduction of the buccal bone crest and wider keratinized tissue width after open healing.

Comparison of Activated PRF and Standard PRF in Terms of Evaluation of Quality Bone Regeneration in Extraction Sockets of Impacted Third Molar: A Split-Mouth Double-Blind Control Trial

Comparison of Activated PRF and Standard PRF in Terms of Evaluation of Quality Bone Regeneration in Extraction Sockets of Impacted Third Molar: A Split-Mouth Double-Blind Control Trial

Ridge preservation using octacalcium phosphate collagen to induce new bone containing a vascular network of mainly Type H vessels

Many studies have shown that it is important to use bone grafts that are easy to mold, bioabsorbable, and stable over time. We focused on Type H blood vessels, which were discovered by Kusumbe et al. in 2014 to be responsible for the interaction between angiogenesis and osteogenesis. The aim of this study was to assess the effect of octacalcium phosphate collagen (OCP/Col), on the healing processes of the extraction socket and the alveolar bone surrounding the extraction socket. Ridge preservation of rat lower first molars was conducted using OCP/Col, and a series of experiments involving micro-CT scanning, observations of new bone, bone morphometry measurements, histological and immunohistochemical analyses, and second harmonic generation imaging were conducted to analyze bone mass, bone quality, angiogenesis, and mechanical properties. The results demonstrate that the calcification level was not very high when using OCP/Col for RP. Moreover, the newly formed bone is rich in vascular components and collagen fibers that are essential for bone tissue remodeling. These characteristics of OCP/Col in RP could contribute significantly to the construction of a rich vascular network around dental implants immediately after implant placement and the subsequent acquisition of osseointegration and reconstruction of the surrounding tissue.

Does Injectable Platelet-Rich Fibrin Combined With Autogenous Demineralized Dentine Enhance Alveolar Ridge Preservation? A Randomized Controlled Trial.

The present trial evaluated the first-time application of autogenous demineralized dentin graft with injectable platelet-rich fibrin (ADDG + i-PRF) versus autogenous demineralized dentin graft (ADDG), in alveolar ridge preservation (ARP) in the maxillary aesthetic zone. Twenty-two maxillary (n = 22) non-molar teeth indicated for extraction were randomized into two groups (n = 11/group). Extracted teeth were prepared into ADDG, implanted into extraction sockets with or without i-PRF amalgamation and covered by collagen sponge. Cone-beam computed tomography scans at baseline and 6 months were compared to assess ridge-dimensional changes. Keratinized tissue width, patient satisfaction, pain score and chair time were recorded. In the course of dental implant placements at 6 months, bone core biopsies of engrafted sites were obtained and analysed histomorphometrically. Reduction in ridge width was 1.71 ± 1.08 and 1.8 ± 1.35 mm, while reduction in ridge height was 1.11 ± 0.76 and 1.8 ± 0.96 mm for ADDG + i-PRF and ADDG, respectively (p > 0.05). Significant differences in keratinized tissue width reduction were notable between ADDG + i-PRF and ADDG (0.12 ± 0.34 and 0.58 ± 0.34 mm respectively; p = 0.008). Postoperative pain scores were significantly lower in ADDG + i-PRF (p = 0.012). All patients in the two groups were satisfied with no differences in chair time (p > 0.05). No differences in total percentage area of newly formed bone, soft tissue or graft particles were observed between the groups (p > 0.05). ADDG alone or in combination with i-PRF yields similar results regarding ARP clinically, quality of the formed osseous tissues, as well as patients' satisfaction. Yet, the addition of i-PRF to ADDG tends to preserve the keratinized tissue and lessen postoperative pain.

Comparative Study of Photobiomodulation Effects on Alveolar Socket Hard Tissue Healing in Rats: Application of 980 nm Versus 810 nm Lasers.

Background: This study aimed to explore the differential effects of photobiomodulation (PBM) via 980 nm and 810 nm lasers on the hard tissue healing of rat alveolar sockets, with a focus on a comparative analysis of hard tissue regeneration and osteogenic gene expression. Objective: This study aimed to explore the effects of PBM using 980 nm and 810 nm lasers on hard tissue healing of rat alveolar sockets, focusing on hard tissue regeneration and osteogenic gene expression. Materials and Methods: Thirty-six male Wistar rats (5 weeks old) had both right and left maxillary first molars extracted. Post extraction, the right alveolar sockets received PBM treatment with either 980 nm (0.3 W, 18 J/cm2) or 810 nm (0.1 W, 6 J/cm2) lasers for seven days, whereas the left sockets served as controls. Rats were euthanized on days 3, 7, 14, and 28 for histopathological, immunohistochemical, micro computed tomography (micro-CT), and quantitative polymerase chain reactionanalyses. Results: On day 3, early granulation tissue, neovascularization, and inflammatory cell aggregates were observed in all groups. By day 7, active osteoclasts and osteoblasts were noted, with a significant increase in CD31-positive cells in the 980 nm group (p < 0.05). Day 14 showed new bone formation, and by day 28, increased cancellous bone and collagen content were present in all groups, with no significant differences between them (p > 0.05). Gene expression analysis revealed higher BMP-2 and Runx-2 levels in laser-treated groups on day 14 (p < 0.05), with the 980 nm group having higher BMP-2 levels than the 810 nm group (p < 0.05). Bone sialoprotein expression was higher in laser-treated groups on days 14 and 28 (p < 0.05), and osteocalcin expression was highest in the 980 nm group on both days (p < 0.05). Micro-CT analysis showed no significant differences among groups in bone mineral density, bone surface (BS)/bone volume (BV), or bone volume (BV)/TV (total volume) indices. Conclusion: PBM with 980 nm and 810 nm lasers promotes early-stage hard tissue healing in extraction sockets, with the 980 nm laser more effectively enhancing osteogenic gene expression, suggesting its potential as an adjunctive therapy in dental and oral surgery.

Clinical outcomes of using operating microscope for alveolar ridge preservation: A randomized controlled trial.

The use of the operating microscope (OM) for extraction and alveolar ridge augmentation (ARP) is increasing due to enhanced magnification and illumination. The primary objective was to compare the wound healing and crestal bone quality after the use of OM and dental loupes (DL) for ARP. Forty non-molar teeth with periapical lesions in need of extraction and ARP from 33 patients were randomly assigned to 2 groups: DL (control) or OM (test). All procedures were performed by 1 surgeon and assessments done by masked examiners. ARP was performed with an allograft and a resorbable collagen membrane. The presence of granulomatous tissue remnants after debridement was recorded. Cone-beam computed tomography (CBCT) and ultrasound (US) scans were taken during the healing phase up to 16-week visits. Bone cores were retrieved from implant osteotomies for histologic analysis. Patient-reported outcome measurements (PROMs) were assessed. All patients completed all study visits except 1 who dropped out before the last visit. After socket debridement, the test group exhibited significantly fewer sites with tissue remnants (p=0.01) and a better healing score at 2-week (p=0.04) and 4-week (p=0.01) time points. There were no significant differences in 12-week crestal bone healing by histology (p=0.1), US (p=0.85), and CBCT healing (p=0.64) at 12weeks, as well as PROMs (p>0.1). Within the limitation of the study, the use of OM for ARP resulted in significantly fewer tissue remnants and favorable early visual wound healing. CBCT and US-derived-crestal bone quality did not show a difference between the 2 groups. Alveolar ridge preservation (ARP) by placing bone particulates in the extraction socket, covered by a wound dressing material, is commonly applied immediately after tooth extraction to reduce jawbone shrinkage in preparation for implant placement later. The jawbone healing varies, depending largely on the ability to remove the etiology, socket features, extent of surgical trauma, and wound stability. Healed jawbone with good quality is favorable for easiness of implant placement and could be related to maintenance of long-term implant health. The surgical microscope with high magnification (up to ∼25×) and co-axial illumination is ideal for assistance in the removal of granulomatous tissue that is believed to interfere with healing, performance of minimally invasive extraction, and stabilization of the wound with meticulous tissue management and fine sutures. This study compared the use of the surgical microscope to dental loupes for ARP in a randomized controlled design. The microscope-assisted ARP is associated with a significantly higher chance of removing granulomatous tissue, favorable early healing, and similar crestal bone quality. Removal of granulomatous tissue is significant for immediate implant placement. This study serves as a model for testing the benefits of the surgical microscope for encouraging early healing in more challenging intraoral surgical procedures.

NLRP3 deficiency improves bone healing of tooth extraction sockets through SMAD2/3-RUNX2 mediated osteoblast differentiation.

Impaired bone healing following tooth extraction poses a significant challenge for implantation. As a crucial component of the natural immune system, the NLRP3 inflammasome is one of the most extensively studied Pattern-Recognition Receptors (PRRs), and is involved in multiple diseases. Yet, the role of NLRP3 in bone healing remains to be clarified. Here, to investigate the effect of NLRP3 on bone healing, we established a maxillary first molar extraction model in wild-type (WT) and NLRP3KO mice using minimally invasive techniques. We observed that NLRP3 was activated during the bone repair phase, and its depletion enhanced socket bone formation and osteoblast differentiation. Moreover, NLRP3 inflammasome activation was found to inhibit osteogenic differentiation in alveolar bone-derived mesenchymal stem cells (aBMSCs), an effect mitigated by NLRP3 deficiency. Mechanistically, we established that SMAD2/3-RUNX2 signaling pathway is a downstream target of NLRP3 inflammasome activation, and SMAD2/3 knockdown partially reversed the significant decrease in expression of RUNX2, OSX, and ALP induced by NLRP3. Thus, our findings demonstrate that NLRP3 negatively modulates alveolar socket bone healing and contribute to the understanding of the NLRP3-induced signaling pathways involved in osteogenesis regulation.

Enhanced alveolar ridge preservation with hyaluronic acid-enriched allografts: a comparative study of granular allografts with and without hyaluronic acid addition

PurposeRidge preservation is essential to restore alveolar ridge volume and to enhance esthetic and functional outcomes for dental implants. The addition of hyaluronic acid to allogeneic bone substitute materials might enhance these outcomes. This clinical study evaluated the efficacy of ridge preservation after tooth extraction using granular allografts with and without hyaluronic acid addition.MethodsIn this retrospective study, 40 patients with compromised extraction sockets were enrolled. Among them, 19 received particulate allogeneic bone substitutes (Allo), 21 received allogeneic bone substitutes with hyaluronic acid (AlloHya). Vertical and horizontal graft stability, graft shrinkage rate, and bone mineral density were assessed using radiographic measurements on CBCT scans conducted before tooth extraction, directly after ridge preservation and after four months. Patients were followed up 12 months post-implantation.ResultsVertical height loss after 4 months was significantly greater in the Allo group (-0.82 ± 0.95 mm) compared to the AlloHya group (-0.19 ± 0.51 mm; p = 0.011). Graft shrinkage rate was 16.9 ± 11.5% (Allo) and 10.3 ± 7.7% (AlloHya) (p = 0.038). After four months, average bone density was significantly higher in the AlloHya compared to the Allo group (p = 0.004). Nearly all implants (39 out of 40) were classified as “Success” according to the ICOI scheme, with no differences in implant quality between the two study groups.ConclusionsImproved graft stability, reduced resorption, and increased bone density were observed in hyaluronic acid-enriched allografts compared to pure allografts. Adding hyaluronic acid to allogeneic bone grafts significantly enhanced outcomes in ridge preservation.

Seating Accuracy of Prefabricated Interim Crowns on Immediate and Delayed Implants: A Laboratory Study.

Evaluation of seating accuracy of interim crowns for the immediate restoration of immediate implants (I-Imp) and delayed implants (D-Imp) placed via static computer-assisted implant surgery (sCAIS). A maxillary training model was modified by removing the central incisors and simulating fresh extraction socket in one site and healed ridge on the other site. An I-Imp was planned in the extraction socket and D-Imp was planned in the healed site. The planned implants were used to design sCAIS surgical template and interim crowns for immediate restoration of the implants. Fourteen surgical models received sCAIS implants after which the interim crowns were inserted. Subsequently, the models with the seated crowns were scanned by a laboratory scanner. The planning virtual model was superimposed against every surgical model to measure vertical, horizontal and proximal contact errors of each crown. All the crowns were positioned more incisally than the planned crowns. This was significantly more noticeable for the D-Imp crowns (0.81 mm) than the I-Imp crowns (0.55 mm). The 2 crown groups had similar horizontal errors (I-Imp &#61;0.35 mm, D-Imp &#61; 0.36 mm). The D-Imp crowns had minimal proximal contact error (0.14 mm), but the I-Imp crowns had significantly greater proximal contact error (0.74 mm) in the form of open distal contacts. This pattern of error appears related to the relationship between the socket morphology and the planned implant position. Prefabricated interim I-Imp crowns suffered from greater errors that affected the proximal contact quality than DImp crowns. The observed deviation of the I-Imp crowns can be attributed to the socket morphology and its relation to the planned implant position. The deviations of the I-Imp crowns are clinically significant and will require clinical adjustments. Thus, caution is needed before routine use of prefabricated interim crowns on I-Imp.

Effects of Simvastatin-Loaded Nanomicelles on the Early Preservation of Tooth Extraction Sites.

The present study intended to evaluate the effect of simvastatin-loaded nanomicelles (SVNs) on promoting new bone formation and reducing alveolar ridge resorption at the tooth extraction sites at the early healing of the extraction sockets. SVNs were synthesized using a dialysis method. The rabbit tooth extraction model was established, SVNs and simvastatin (SV) were loaded on gelatin sponge and inserted into the extraction socket. CBCT scans were performed at 0, 2, and 4weeks postoperatively to evaluate bone formation and alveolar ridge absorption in the extraction sockets. And all the animals were sacrificed and the mandibles were harvested. And HE staining and Masson staining were used for histological evaluation of the bone formation in the extraction sockets. Radiographic evaluation showed that compared with the blank control group, at 2 and 4weeks after extraction, SVNs increased the new bone density in the extraction sockets by 75.7% and 96.5%, and reduced the absorption rate of alveolar ridge length at the extraction sites by 60.8% and 49.1%, respectively. Histological evaluation showed that SVNs significantly improved the maturation of new bone tissue in the extraction sockets. SVNs can significantly accelerate healing and effectively reduce the absorption of alveolar ridge at the extraction sites in the early stage of tooth extraction socket healing.

Healing sequelae following tooth extraction and dental implant placement in an aged, ovariectomy model.

At present, a lack of consensus exists regarding the clinical impact of osteoporosis on alveolar bone metabolism during implant osseointegration. While limited preclinical and clinical evidence demonstrates a negative influence of osteoporosis on dental extraction socket healing, no preclinical studies offer data on the results of implant placement in 6-mo-old, ovariectomized (OVX) Sprague-Dawley rats. This study aimed to investigate the outcomes of dental tooth extraction socket healing and implant placement in a rodent model of osteoporosis following daily vehicle (VEH) or abaloparatide (ABL) administration. Micro-CT and histologic analysis demonstrated signs of delayed wound healing, consistent with alveolar osteitis in extraction sockets following 42d of healing in both the VEH and ABL groups. In a semiquantitative histological analysis, the OVX-ABL group demonstrated a tendency for improved socket regeneration with a 3-fold greater rate for moderate socket healing when compared to the OVX-VEH group (43% vs 14%), however, this finding was not statistically significant (p=.11). No significant differences were observed between vehicle and test groups in terms of implant outcomes (BMD and bone volume/total volume) at 14- and 21-d post-implant placement. Abaloparatide (ABL) significantly increased BMD of the femoral shaft and intact maxillary alveolar bone sites in OVX animals, demonstrating the therapeutic potential for oral hard tissue regeneration. The present model involving estrogen-deficiency-induced bone loss demonstrated an impaired healing response to dental extraction and implant installation.

Immediate implant placement in damaged extraction sockets: a systematic review and meta-analysis of randomized controlled trials.

The aim of this study was to observe whether immediate implant placement (IIP) into damaged extraction sockets is a successful modality for treating hopeless teeth that require extraction. An electronic search was carried out through four databases (PubMed/MEDLINE, Web of Science, Scopus, and ScienceDirect) to identify randomized controlled trials (2013-2023) to understand whether IIP in damaged sockets is a successful treatment. The focus question was, 'In a patient with a hopeless tooth that needs extraction with the indication for dental implant treatment, is IIP in damaged extraction sockets, compared to undamaged sockets or healed sites, an effective method for the replacement of hopeless teeth and achieving a favorable clinical result?' The risk of bias was appraised and a meta-analysis using random effect was applied. Five studies with 135 patients and 138 implants were included. The implant survival rate was 100% for all studies and period evaluated; the pink esthetic score (PES) scores had no statistically significant result for all articles that evaluated this parameter; the soft tissue changes was reported by two studies: one found no significant differences and the other showed that the test group experienced reduced soft tissue loss at the 1-year evaluation (measured with digital intraoral scanners); other two studies assessed the marginal bone loss, presenting no differences between groups. The meta-analysis showed homogeneity between the studies. There was an equilibrium among the groups in the various studies included, and age tended to be lower in the test group. The buccal bone tissue and pink esthetic score showed favoritism for the test group but without statistical significance. This study suggests that IIP in the presence of buccal bone defects can achieve comparable clinical and radiological outcomes to traditional methods in the short term of the limited studies available. The buccal aspect is not possible to be evaluated through radiographs. Bone regeneration was essential to reach optimal results. It is important to emphasize that IIP requires adherence to rigorous criteria to ensure functionally acceptable results.

The quantified method for blood clot detection in the extraction socket

Background Currently, there is no objective and quantified measurement for detecting blood clots during extraction socket hemostasis. It has relied solely on clinical observation, even when conducting clinical research by using extraction sockets as samples. This study aimed to assess the in vitro reliability and clinical-relevant validity of a new objective measurement providing quantified data called blood clot detection (BCD) using a standard capillary tube. Methods The in vitro part of the study was conducted using surplus blood samples from ten healthy participants. Two identical sets of blood samples in simulation reservoirs mimicking bleeding sockets were prepared for reliability tests. Then, the capillary tubes were concurrently placed in the reservoirs. The blood-filled distances were measured. The part of clinical-relevant validity study was conducted in sixteen extraction sockets from each healthy participant. Clinical observation and BCD measurement were evaluated by two calibrated assessors. The total duration of the assessment was a 30-minute. Results The distances of the blood-filled capillary tube were decreased by time. Test and retest reliability analysis of the BCD measurement showed an excellent intraclass correlation coefficient of 0.980 (0.968 to 0.988). The medians of blood-filled distance categorized by clinical observation into active bleeding, sluggish oozing, and clot formation were 13.0 mm (Q1 = 11.7, Q3 = 13.8), 5.6 mm (Q1 = 4.3, Q3 = 7.0), and 0.9 mm (Q1 = 0.5, Q3 = 1.3), respectively. The blood-filled distance of the clot formation group was significantly less than the active bleeding and sluggish oozing (p&lt;0.001). Therefore, the BCD measurement also significantly indicated the completion of extraction socket hemostasis Conclusions A distance of blood-filled in capillary tube of 0.9 mm from the BCD measurement significantly ensured complete clot formation. The BCD measurement proved to be a quantified tool for objectively measuring hemostasis of bleeding socket.

The efficiency of two different synthetic bone graft materials on alveolar ridge preservation after tooth extraction: a split-mouth study

BackgroundAlveolar Bone loss occurs frequently during the first six months after tooth extraction. Various studies have proposed different methods to reduce as much as possible the atrophy of the alveolar ridge after tooth extraction. Filling the socket with biomaterials after extraction can reduce the resorption of the alveolar ridge. We compared the height of the alveolar process at the mesial and distal aspects of the extraction site and the resorption rate was calculated after the application of HA/β-TCP or synthetic co-polymer polyglycolic - polylactic acid PLGA mixed with blood to prevent socket resorption immediately and after tooth extraction.MethodsThe study was conducted on 24 extraction sockets of impacted mandibular third molars bilaterally, vertically, and completely covered, with a thin bony layer. HA/β-TCP was inserted into 12 of the dental sockets immediately after extraction, and the synthetic polymer PLGA was inserted into 12 of the dental sockets. All sockets were covered completely with a full-thickness envelope flap. Follow-up was performed for one year after extraction, using radiographs and stents for the vertical alveolar ridge measurements.ResultsThe mean resorption rate in the HA/β-TCP and PLGA groups was ± 1.23 mm and ± 0.1 mm, respectively. A minimal alveolar bone height reduction of HA/β-TCP was observed after 9 months, the reduction showed a slight decrease to 0.93 mm, while this rate was 0.04 mm after 9 months in the PLGA group. Moreover, the bone height was maintained after three months, indicating a good HA/β-TCP graft performance in preserving alveolar bone (1.04 mm) while this rate was (0.04 mm) for PLGA.ConclusionThe PLGA graft demonstrated adequate safety and efficacy in dental socket preservation following tooth extraction. However, HA/β-TCP causes greater resorption at augmented sites than PLGA, which clinicians should consider during treatment planning.

Spontaneous bacterial peritonitis and soft tissue healing after tooth extraction in liver cirrhosis patients

The objective of this study was to identify the association between tooth extraction and occurrence of spontaneous bacterial peritonitis (SBP) and to assess delayed soft tissue healing of extraction sockets in patients with cirrhosis. One hundred nineteen participants awaiting liver transplantation who required tooth extraction were included. Seven days before the surgery, the patients underwent panoramic radiography and laboratory examinations. Soft tissue healing was evaluated 7 days after the tooth extraction and medical records were checked after 21 days for development of SBP. The relationship between predictive factors and outcomes was assessed by using multiple binomial logistic regression. One hundred ninety-five teeth were extracted, resulting in 146 alveolar wounds, in which the majority (47%) consisted of alveolar sockets of multirooted teeth. One participant was diagnosed with SBP (Escherichia coli [E. coli]) and another diagnosed with bacterascites (Streptococcus viridans [S. viridans] group), occurring 11 and 6 days after tooth extraction. Poor soft tissue healing was observed in 20 (13.7%) patients, which was correlated to 2 risk factors, that is, jaundice (P = .007, adjusted odds ratio [OR] = 4.91, 95% confidence interval [CI] = 1.56-15.47) and moderate neutropenia (P = .048, adjusted OR = 13.99, 95% CI = 1.02-192.07). No association was found between tooth extraction and SBP in patients with cirrhosis. The delayed soft tissue healing was related to jaundice (hyperbilirubinemia) and moderate neutropenia.

Clinical Features of Molar Root-Incisor Malformation: A Retrospective Study

This study aimed to identify the clinical characteristics of molar root-incisor malformation (MRIM) and provide clinical considerations for treatments. Panoramic radiographs and electronic medical records of 64 patients with MRIM were retrospectively reviewed. Age, gender, follow-up period, medical history, complications, distribution of MRIM teeth, treatment, and prognosis were analyzed. Females were affected 1.56 times more than males, and the average age was 8.2 years. Dental complications, including periapical lesions, abscesses, and alveolar bone loss, were observed in 71.9%, and eruption disturbance of adjacent teeth was noticed in 37.5%. Most patients had medical histories in the first year of life. The most prevalent history was prematurity or low birthweight, followed by neurological conditions, surgeries, medications, and infections. All patients had MRIM on permanent first molars. The primary second molars were the second most frequently involved, followed by maxillary permanent central incisors and primary first molars. The prevalence was low on permanent lateral incisors and canines. Extraction was the most prevalent treatment done on MRIM-affected teeth, and most extraction sockets were managed by the eruption of permanent second molars. Few cases received endodontic treatment but with low success rates. Early detection of MRIM and prompt, appropriate treatment are important to avoid unnecessary discomfort from complications.

A finite element analysis on the indication for extracting partially impacted mandibular third molars considering mandibular trauma

BackgroundPatients presenting with partially impacted lower third molars (M3) have a higher likelihood of experiencing angle fractures while simultaneously decreasing the risk of condylar fractures. However, the specific biomechanical mechanism responsible for this occurrence remains unclear. Moreover, there is an ongoing debate regarding whether the removal of M3s might actually increase the risk of condylar fractures. This study aimed to evaluate how the presence of M3s influences mandibular fractures resulting from blows to the symphysis and lateral mandibular body, and to determine the indication for extracting M3s in such cases.MethodsModels of the mandible with a partially M3-impacted model (M3I), M3-extracted model (M3E), and M3-absent model (M3A) were generated using a computer. A traumatic blown force of 2000 N was applied to the symphysis and the right body of the mandible. Von Mises and principal stresses were analyzed, and failure indexes were determined. Two cases of mandibular linear fractures were chosen for model verification and interpretation.ResultsWhen force was applied to the symphysis, the condylar region exhibited the highest stress levels, while stress in the mandibular angle region was much less regardless of the M3 state. On applying the force to the right mandibular body, stress in the condylar region decreased while stress in the mandibular body increased, especially in the blown regions. Impacted tooth or cavity formation post-M3 extraction led to uneven stress distribution on the blown side of the mandible, increasing the risk of mandibular angle fractures. In cases where M3 was absent or the extraction socket had healed, stress from lateral traumatic blown force was evenly distributed along both the inner and outer oblique lines of the mandible, thereby reducing the risk of mandibular fractures.ConclusionsThe reduced risk of condylar fractures in patients with partially impacted lower M3s and mandibular angle fractures is mainly due to lateral blows on the mandible, which generate less stress in the condylar region than blows on the mandibular symphysis, rather than being caused by the M3 itself. Extraction of the lower M3 can decrease the risk of mandibular fractures, with a minor influence on condylar fractures.

The effects of chlorhexidine gel and tranexamic acid application after tooth extraction on the risk of alveolar osteitis formation: a double blind clinical study.

Alveolar osteitis(AO), one of the most common complications occurring in 1-10% of cases following tooth extraction, occurs due to the disruption of clot formation in the extraction socket. This study aims to evaluate the effect of using absorbable gelatin sponge, chlorhexidine gel, and tranexamic acid agents on the development of AO following extraction. Between March and October 2023, the teeth of 98 healthy patients (average age: 38, range: 19-62) with extraction indications were extracted at Recep Tayyip Erdoğan University, Faculty of Dentistry, Department of Oral and Maxillofacial Surgery. 113 extraction sockets(85 molars and 28 premolars) were randomly treated with absorbable gelatin sponge(AGS), chlorhexidine gel with AGS, and tranexamic acid with AGS. Pain and edema levels were recorded using visual analog scale(VAS) ranging from 0 to 10 by the patients. Additionally, presence of halitosis, trismus and exposed bone was noted on forms on 3rd and 7th days (recorded as present or absent). The study prospectively aimed to prevent AO using 3 different dental agents in the extraction sockets. Statistical analyses of the study were conducted using the SPSS software package. Alveolitis was observed in 12 out of 113 tooth extractions(%10.6). Pain and edema scores significantly decreased in absorbable gelatin sponge group on the 7th day (p < 0.05). Pain score on the 7th day in chlorhexidine group and age, edema score on the 7th day in tranexamic acid group, were found to be significantly higher (p < 0.05). Incidence of AO, can be reduced by placing agents in the extraction socket, preventing post-extraction pain experienced by patients. NCT06435832.