External Magnetic Field Research Articles

Numerical study on Fe3O4 nanoparticle separation from water flow using magnetic field: A 3D simulation

The development of magnetic separation technology using magnetic nanoparticles offers a promising avenue for targeted drug delivery and dealing with the upcoming water crises, environmental pollution and the gradual mineral resource depletion. In this study, a three-dimensional Lagrangian Discrete Phase Model (DPM) is carried out to simulate the performance of Fe3O4 nanoparticles to improve the separation process under the influence of an external magnetic field within a horizontal pipe. The crucial role of the drag force in capture efficiency (CE) prompted its examination, simulating various drag models for groups of particles. The Stokes-Cunningham model, showing a 3.59% average error is a suitable choice compared to experimental results. The research examines the impact of effective parameters, including flow velocity, magnetic field intensity, wire location, particle size and mass flow rate, and pipe diameter on CE and flow pattern. The results show that increasing nanoparticle concentration reshapes the flow pattern due to secondary flows without significantly changing separation efficiency. Moreover, decreasing flow velocity, diminishes drag force and enhances magnetic force impact. Specifically, reducing the velocity to a third increases CE by 37%. Furthermore, capture capacity varies approximately linearly with electric current. Due to the magnetic force’s role as a volumetric force in interphase momentum transfer, the increase in particle size from 200 to 500 nm at 3 × 105 A enhances CE by nearly 50%. However, increasing the pipe diameter diminishes particle capture, attributed to higher Reynolds numbers. According to the results, the impact of increasing magnetic field intensity and particle size on CE improvement is notably more pronounced compared to the effect of flow velocity reduction. A comparative analysis of three injection types reveals that using the group injection type helps to select an appropriate injection location to increase CE and identify the final positions of nanoparticles.

Implementation of Logic Function and Memristive Behavior in Synthetic Antiferromagnet with Strong Immunity to Perpendicular Magnetic Field Interference

Spintronic devices with heavy metal/ferromagnet structures have shown potential applications for in‐memory computing. However, the sensitivity of ferromagnet to external magnetic field raises a challenge for the practical applications of these devices. The usage of synthetic antiferromagnet (SAF) can effectively address this issue due to its good magnetic field immunity. This work demonstrates the implementation of all 16 types of Boolean logic functions via controlling the magnetization states of the SAF layer by using current pulses, and also the stable multistate storage under the interference of perpendicular magnetic field in these devices. The SAF devices also exhibit synaptic plasticity under the stimulation of current pulses. The artificial neural network constructed based on the SAF device can perform handwritten digit recognition tasks with an accuracy rate of 90%. These results showcase the viability and superiority of the SAF device in building logic‐in‐memory architecture for its strong immunity to magnetic field interference.

Magneto-optical Particles in Isotropic Spinning Fields Mimic Magnetic Monopoles.

In contrast with the typical electric currents accelerated under the influence of a Coulombic force, there are only a few condensed matter examples of particles experiencing a force proportional to a constant, external magnetic field. In this Letter, we present a new alternative, based on an isotropic radiation spinning field and the magneto-optical effect, in which a particle is propelled by a magnetic field just like a magnetic monopole will do. This is a purely nonreciprocal effect as the reciprocal equivalent (a chiral dipole), despite presenting a dichroic response, does not experience any force when illuminated by the spinning field. The "magnetic charge" induced by impinging radiation on the magneto-optical dipole is found to depend linearly on the helicity of the field. In addition, this artificial monopole experiences a dichroic permanent optical torque and does not interact with an external electric field.

Magnetic-field-driven targeting of exosomes modulates immune and metabolic changes in dystrophic muscle.

Exosomes are promising therapeutics for tissue repair and regeneration to induce and guide appropriate immune responses in dystrophic pathologies. However, manipulating exosomes to control their biodistribution and targeting them in vivo to achieve adequate therapeutic benefits still poses a major challenge. Here we overcome this limitation by developing an externally controlled delivery system for primed annexin A1 myo-exosomes (Exomyo). Effective nanocarriers are realized by immobilizing the Exomyo onto ferromagnetic nanotubes to achieve controlled delivery and localization of Exomyo to skeletal muscles by systemic injection using an external magnetic field. Quantitative muscle-level analyses revealed that macrophages dominate the uptake of Exomyo from these ferromagnetic nanotubes in vivo to synergistically promote beneficial muscle responses in a murine animal model of Duchenne muscular dystrophy. Our findings provide insights into the development of exosome-based therapies for muscle diseases and, in general, highlight the formulation of effective functional nanocarriers aimed at optimizing exosome biodistribution.

Inkjet Printing of Magnetically Responsive Photonic Crystals

AbstractMagnetic colloidal nanocrystalline clusters (MCNCs) exhibit a color‐changing response to a magnetic field due to their tunable assembly into photonic crystals demonstrating visible light diffraction. The use of this response to obtain a magnetically sensitive color micropattern on the surface of a solid substrate requires appropriate scalable technologies for deposition of MCNCs. Here, inkjet printing of MCNCs onto the surface of a solid substrate coated with uncured polydimethylsiloxane is addressed and demonstrate their capability to form desired patterns with structural colors from blue to red controlled by external magnetic field. The results, thereby, pave the way to semi‐commercial manufacture an anticounterfeiting imaging at a large scale.

Controllable coupling between fundamental modes in an asymmetric superconducting coplanar waveguide resonator

Controllable coupling between the odd and even fundamental modes of an asymmetric half-wavelength superconducting coplanar waveguide resonator is demonstrated. The resonant frequency of the even mode Ωe could be tuned by an external magnetic field, while the resonant frequency of the odd mode Ωo is field independent. To realize the tunability of Ωe, the central conductor of the NbN-based resonator was galvanically coupled to an array of Al-based rf-SQUIDs (radio frequency superconducting quantum interferometer device). These rf-SQUIDs are placed in only one resonator gap, ensuring its strong asymmetry. By adjusting the appropriate external magnetic flux Φ, equal frequencies of both modes were obtained. At this resonant point Ωo(Φ)=Ωe(Φ) an avoided level crossing of the eigenfrequencies was observed, demonstrating the coupling between the odd and even fundamental modes.

Magnetic pomegranate peels activated carbon (MG-PPAC) composite for Acid Orange 7 dye removal from wastewater

A magnetic pomegranate peels activated carbon (MG-PPAC) nanocomposite (23.46–26.75 nm) was prepared as an effective adsorbent for Acid Orange 7 (AO7) dye removal from wastewater. The effects of impregnation ratio and activation temperatures (600–900 °C) on the specific surface area and pore morphology were studied. BET, SEM, EDX, FT-IR, XRD and VSM are considered the synthesized composite MG-PPAC. The prepared magnetic composite at 700 °C activation temperature and impregnation ratio 1/2 (peels/ZnCl2) exhibited 513.34 m2/g surface area, 0.4025 cm3/g volume of the total pores, and 3.1364 nm mean diameter of the pores. The magnetization saturation, remanence and coercivity of the MG-PPA composite were 14.116 emu/g, 0.50685 emu/g, and 19.705 G, respectively. Also, the composite MG-PPAC was in a super-paramagnetic state at room temperature and could be gathered within 5 S (less than 5 S) with an external magnetic field. The impact of pH, adsorbent dose, initial concentration of adsorbate (AO7 dye), and time of contact have been studied to optimize the removal process. Langmuir, Freundlich and Temkin isotherm models were used to investigate MG-PPAC adsorption behavior for AO7 dye. Applicability of the Langmuir isotherm model demonstrates a monolayer adsorption AO7 dye removal process, and the maximum monolayer capacity (Qm) attained from linear solvation of LIM is 322.58 mg/g. Furthermore, the highest removal was 99.53% at pH 2.25. Also, the adsorption process was tested using like pseudo-first-order, pseudo-second-order, intraparticle diffusion, film diffusion, and Elovich models. The pseudo-second-order model is well-fitted to the operational data of AO7 dye removal.

Shape-position perceptive fusion electronic skin with autonomous learning for gesture interaction

Wearable devices, such as data gloves and electronic skins, can perceive human instructions, behaviors and even emotions by tracking a hand's motion, with the help of knowledge learning. The shape or position single-mode sensor in such devices often lacks comprehensive information to perceive interactive gestures. Meanwhile, the limited computing power of wearable applications restricts the multimode fusion of different sensing data and the deployment of deep learning networks. We propose a perceptive fusion electronic skin (PFES) with a bioinspired hierarchical structure that utilizes the magnetization state of a magnetostrictive alloy film to be sensitive to external strain or magnetic field. Installed at the joints of a hand, the PFES realizes perception of curvature (joint shape) and magnetism (joint position) information by mapping corresponding signals to the two-directional continuous distribution such that the two edges represent the contributions of curvature radius and magnetic field, respectively. By autonomously selecting knowledge closer to the user's hand movement characteristics, the reinforced knowledge distillation method is developed to learn and compress a teacher model for rapid deployment on wearable devices. The PFES integrating the autonomous learning algorithm can fuse curvature-magnetism dual information, ultimately achieving human machine interaction with gesture recognition and haptic feedback for cross-space perception and manipulation.

Non-linear dynamics and bandgap control in magneto-rheological elastomers metamaterials with inertial amplification

Sandwich plate structures are extensively utilized in engineering due to their favorable stiffness-to-weight ratio. Nonetheless, these lightweight thin-walled structures frequently encounter challenges related to inadequate low-frequency vibration performance, which significantly restricts their applications, particularly in the realm of precision instruments which is sensitive to vibration. This study introduces an innovative design of an active nonlinear metamaterial, to achieve tunable broadband low-frequency bandgaps for sandwich plates. The nonlinear oscillator incorporates an inertia amplification mechanism (IAM), Euler-buckled beams, mass elements, and magneto-rheological elastomers (MREs), which are modulated via external magnetic fields to adjust the material's stiffness dynamically. Employing Hamilton's principles and the plate wave expansion method (PWE), the dispersion relations for the metamaterial plate are derived, elucidating the dispersion surfaces and the band structures within its sandwich-like plates.The dynamical equations of the metamaterial plate are formulated and validated through numerical simulations using the Galerkin method, confirming the theoretical predictions. The results demonstrate effective control over low-frequency and broadband bandgaps under low mass ratio conditions through strategic manipulation of the inertia amplification factor and magnetic flux. The study extensively explores the nonlinear dynamic responses of the metamaterial, highlighting the significant impact of excitation amplitudes on the amplitude-dependent bandgaps.

Interplay of size and magnetic effects in electrocatalytic water oxidation activity of sub-10 nm NiOx supported porous hard-carbons.

This report describes a systematic approach for precise engineering of a catalyst-metal oxide interface through combining complementary approaches of chemical vapor deposition and atomic layer deposition. Specifically, Chemical Vapor Deposition (CVD) fabricated nanostructured hard-carbon framework (NCF) is employed as synergistic support for precise deposition of NiOx particles through Atomic Layer Deposition (ALD). The three variants of NCF-NiOx system (dimensions ranging from 3-12 nm, surface coverage ranging from 0.14% to 2%) achieved exhibit unique electrocatalytic water oxidation activities, that are further strongly influenced by an external magnetic field (Hext). This confluence of size engineering and associated magnetic field effects interplay to produce the largest lowering in Rct at Hext = 200 mT. A comprehensive analysis of electrocatalytic parameters including the Tafel slope and double layer capacitance establishes further insights on co-relation of size effect and magnetic properties to understand the role of nanocarbon supported transition metal oxides in water electrolysis.

A numerical study on effects of current density distribution, turbulence, and magnetohydrodynamics (MHD) on electrolytic gas flow with application to alkaline water electrolysis (AWE)

A three-phase Eulerian model is proposed to investigate the induced flow due to the generation of gas bubbles between two parallel plates without forced convection with application to alkaline water electrolysis (AWE). Earlier models, assuming a laminar regime, accurately predicted the multiphase flow near electrodes but struggled to calculate bulk liquid electrolyte flow away from them. Herein, we study the influences of electric current density distribution, turbulence effects, and the interaction between flow and the magnetic field known as magnetohydrodynamics (MHD). Based on our modeling results, the traditional method using an averaged uniform current density along electrodes (e.g. here 2000 A m−2) is feasible, as incorporating calculated non-uniform current distribution minimally affects the multiphase velocity field. The Lorentz force, originating from flow interaction with the (self-induced) magnetic field, is negligible compared to forces like drag or bubble dispersion. Consequently, MHD effects only become relevant upon introducing an external magnetic field. Including turbulence in the model, being minor in magnitude but non-negligible, significantly improves the predicted velocity profile. Modeling results are validated against an experiment.

Light-induced Kondo-like exciton-spin interaction in neodymium(II) doped hybrid perovskite

Tuning the properties of a pair of entangled electron and hole in a light-induced exciton is a fundamentally intriguing inquiry for quantum science. Here, using semiconducting hybrid perovskite as an exploratory platform, we discover that Nd2+-doped CH3NH3PbI3 (MAPbI3) perovskite exhibits a Kondo-like exciton-spin interaction under cryogenic and photoexcitation conditions. The feedback to such interaction between excitons in perovskite and the localized spins in Nd2+ is observed as notably prolonged carrier lifetimes measured by time-resolved photoluminescence, ~10 times to that of pristine MAPbI3 without Nd2+ dopant. From a mechanistic standpoint, such extended charge separation states are the consequence of the trap state enabled by the antiferromagnetic exchange interaction between the light-induced exciton and the localized 4 f spins of the Nd2+ in the proximity. Importantly, this Kondo-like exciton-spin interaction can be modulated by either increasing Nd2+ doping concentration that enhances the coupling between the exciton and Nd2+ 4 f spins as evidenced by elongated carrier lifetime, or by using an external magnetic field that can nullify the spin-dependent exchange interaction therein due to the unified orientations of Nd2+ spin angular momentum, thereby leading to exciton recombination at the dynamics comparable to pristine MAPbI3.

Effect of grain structure on the magnetic properties of AlNiCo 8 alloys

AlNiCo alloy has gained popularity again in recent years due to its good corrosion resistance, affordability, and superior performance at high temperature. However, the lower magnetic properties of AlNiCo limit its wide variety of applications. Directional solidification process is a key process that affects the properties of AlNiCo alloy. During the solidification process, grains with various structures are formed due to the difference of cooling rate at different positions of the ingot. As the cooling rate slows down, the average grain size gradually increases, and orientation degree of the grains becomes better, resulting in the increase of coercivity (Hc) and remanence (Br). Therefore, the top sample has the best Hc and Br, the bottom is the worst, and the middle is between the two. It is found that when the average grain size increases, the percentage of transverse grain boundaries and high angle grain boundaries (HAGBs) decrease, the truncated α1 phase decreases, and the Hc rises, whereas the magnetic moment along the easy-axis direction is not affected by the external magnetic field when the grain orientation coincides, and the Br value increases, and the Br value increases. Large and highly oriented grains are associated with excellent performance, providing a new method to enhancing magnetic properties by regulating the grain structure.

Tunable and strong circular dichroism mediated with graphene-Weyl semimetal planar scheme

Strong circular dichroism (CD) has been observed in Weyl semimetals (WSMs) because of the extremely large gyrotropic optical response. However, traditional proposals cannot tune the wavelength of CD peaks continuously without changing the geometric parameters or external magnetic field, which limits the practical application. This study presents a lithography-free platform exhibits near-unity CD in a WSM-graphene-dielectric structure. It is theoretically shown that the proposal possesses different reflectance properties for right-hand circular polarization and left-hand circular polarization light in the mid-infrared range. The merits of the wide-angular chiral capacity of CP waves can also be maintained. The CD of the chiral structure can be tuned not only by adjusting the structural parameters, but also the chemical potential of graphene, which may also facilitate the design of more efficient chiral optical devices.

Multi-band enhanced nonreciprocal thermal radiation based on Weyl semimetals

Previous studies manifested that the majority of structures that exhibit nonreciprocal thermal radiation in the mid-infrared are capable of achieving either single-band strong nonreciprocity or multi-band weak nonreciprocity at a large incidence angle. However, few structures can realize multi-band strong nonreciprocity at a small incidence angle. To address such scientific issues, we propose a tunable nonreciprocal thermal emitter based on gallium arsenide (GaAs)/graphene/Weyl semimetal (WSM). This device is capable of achieving strong nonreciprocity at 7.3 μm, 10 μm and 13.6 μm wavelengths at an incidence angle of 25.5°. It is shown that the field enhancement of the GaAs/graphene composite layer can improve the nonreciprocal response of the WSM layer. In addition, by changing the Fermi energy level of graphene and the axial vector b of the Weyl semimetal, tunable nonreciprocal thermal radiation can be realized. What's more, we find that the structure breaks Kirchhoff's law without lithography and an external magnetic field, which reveals the advantages of applying our research in the field of thermal radiation.

The immobilization of L-Valine on superparamagnetic Fe3O4 nanoparticles as a novel, recoverable and green nanocatalyst for the synthesis of new thiazole derivatives

The novel immobilization of L-Valine on superparamagnetic Fe3O4 nanoparticles was prepared using a simple protocol for the first time. This compound acts as a highly efficient and recyclable heterogeneous nanocatalyst for the synthesis of thiazole derivatives via a one-pot and multi-component condensation reaction of arylglyoxals monohydrate, cyclic 1,3-dicarbonyls, and thiobenzamides in a water solvent. The structure of the nanocatalyst was characterized and confirmed using various techniques, such as Fourier transform infrared spectroscopy (FT-IR), Energy Dispersive X-ray (XRD), scanning electron microscopy (SEM), thermogravimetric analysis (TG/DTA), and vibrating sample magnetometry (VSM). This heterogeneous nanocatalyst can be easily recovered from the reaction mixture by an external magnetic field and reused for subsequent reactions at least five times without losing significant catalytic activity.

Characterization and optimization of magnetic molecularly imprinted nanofibers for determination of sunitinib in human serum and capsule samples

This article reports a spectrofluorometric method for the determination of sunitinib (STB) drug based on molecularly imprinted nanofibers fabricated by the electrospinning method and modified by magnetic nanoparticles as sorbent. The characterization of magnetic molecularly imprinted nanofibers (MMINs) was carried out using X-ray diffraction (XRD), scanning electron microscope (SEM), and transmission electron microscopy (TEM), which confirmed the successful synthesis of MMINs with well-distributed magnetite nanoparticles. Drug adsorption and desorption were optimized and important parameters such as sample pH, nanofiber mass, adsorption and desorption time, eluent solvent and sample volume were analyzed. The results demonstrated that the MMINs act as a selective sorbent for STB and can be readily collected through an external magnetic field. Methanol was used as the best eluent solvent for STB desorption from MNIN. A linear correlation was observed between the STB concentrations and fluorescence intensities in the range of 0.01–15.0 mg L−1. The detection limit for this method was 0.002 mg L−1. The relative standard deviation (RSD) of 2.6 % for 1.0 mg L−1 and 1.1 % for 10 mg L−1 of STB (n = 3) were obtained, which indicates that the developed method is precise in determining STB. Human serum and capsule analysis show the applicability of the proposed sensor for real samples.

Natural source-field induced polarisation exploration of an iron-oxide copper-gold (IOCG) deposit under thick cover

Induced polarisation (IP) is a common geophysical method of exploration for disseminated sulphides. However, in areas with deep (>200 m) and conductive (10 Ωm or less) cover, the technique is less successful as it requires a significant transmitter source and large-offset dipoles. An alternative approach is to use natural-variations in Earth’s external magnetic field as the polarising source of the signal, known as natural-field IP. This paper presents a study of extracting IP information from electrical dipole observations during a broadband magnetotelluric (MT) program with a 9 km by 9 km grid of 100 sites above the Vulcan IOCG deposit beneath 750 m of cover, ∼40 km north of the Olympic Dam IOCG mine in South Australia. Inter-site transfer functions between 95 sites and five reference sites at the southeast and southwest corners of the grid were computed to determine a phase shift between horizontal electric fields in the bandwidth of 1–100 s period. Phase shifts of up to – 5 degrees were centred on a region of brecciated hematite where drill holes intersected pyrite, and an inferred fault-zone from passive seismics that marks the boundary between upper crust that is resistive (>100 Ω.m) with high magnetic susceptibility to the south of the fault, and a region of conductive crust (<10 Ω.m) which is low magnetic susceptibility. Our study suggests that the natural-field IP method can identify regions of polarizable minerals beneath deep cover where artificial power sources cannot be feasibly deployed. Such surveys are cheaper, safer, and easier to deploy as only receivers are required, and 3D coverage can be obtained as the source-field is of much larger dimension than the survey array. In addition, the natural-field IP signals are observed as part of the MT program so that both electrical resistivity and polarisation parameters can be determined.

Ultrasensitive Paper-Based Photoelectrochemical Biosensor for Acetamiprid Detection Enabled by Spin-State Manipulation and Polarity-Switching.

Efficient carrier separation is vitally crucial to improving the detection sensitivity of photoelectrochemical (PEC) biosensors. Here, we developed a facile strategy to efficiently regulate the carrier separation efficiency of the photoactive matrix BiOI and In2S3 signal label functionalized paper chip by manipulation of electrons spin-state and rational design of electron transport pathways. The spin-dependent electronic structures of BiOI and In2S3 were regulated via enhanced electron-spin parallel alignment induced by an external magnetic field, markedly retarding carrier recombination and extending their lifetime. Simultaneously, with the progress of the target-induced catalytic hairpin assembly process, the transfer path of photogenerated carriers was changed, leading to a switch in photocurrent polarity from cathode to anode. This reversed electron transport pathway not only boosted the separation ability of photogenerated electrons but also eliminated false-positive and false-negative signals, thereby further improving the detection sensitivity. As a proof of concept, the well-designed magnetic field-stimulated paper-based PEC biosensor showed highly selectivity and sensitivity for acetamiprid assay with a wide linear range of 1 fM to 20 nM and an ultralow detection limit of 0.73 fM. This work develops a universal strategy for improving the sensitivity of biosensors and exhibits enormous potential in the fields of bioanalysis and clinical diagnosis.

Room-Temperature Highly Efficient Nonvolatile Magnetization Switching by Current in van der Waals Fe3GaTe2 Devices.

The ability to manipulate magnetic states by a low electric current represents a fundamental desire in spintronics. In recent years, two-dimensional van der Waals (vdW) magnetic materials have attracted an extensive amount of attention due to their appreciable spin-orbit torque effect. However, for most known vdW ferromagnets, their relatively low Curie temperatures (TC) limit their applications. Consequently, low-power vdW spintronic devices that can operate at room temperature are in great demand. In this research, we fabricate nanodevices based on a solitary thin flake of vdW ferromagnet Fe3GaTe2, in which we successfully achieve nonvolatile and highly efficient magnetization switching by small currents at room temperature. Notably, the switching current density and the switching power dissipation are as low as 1.7 × 105 A/cm2 and 1.6 × 1013 W/m3, respectively, with an external magnetic field of 80 Oe; both are much reduced compared to those of conventional magnet/heavy metal heterostructure devices and other vdW devices.