Expression Of Osteogenic Proteins Research Articles

Effect of icariin surface treatment on the resorption of denuded roots after replantation in rat.

Limiting the incidence of resorption associated with delayed replantation of avulsed teeth is critical for long-term tooth survival. In this study, we assessed whether icariin, a natural product with anti-osteoclastic properties, could reduce root resorption in a rat model of tooth replantation. Cytocompatibility of icariin (10, 20, 40 and 80 μM) was evaluated by CCK-8 proliferation assay in vitro, and an osteoclastogenesis assay was performed to evaluate the effect of icariin on the differentiation of rat bone marrow macrophages and human peripheral blood monocytes into tartrate-resistant acid phosphatase-stained (TRAP+ ) multinucleated giant cells (MNGCs). Differentiation of human periodontal ligament stem cells (hPDLSCs) treated with icariin (10 μM) was also evaluated at 5, 10 and 21 days of osteogenic induction. The first maxillary molars of five-week-old male Sprague-Dawley rats were extracted, denuded of PDL, then treated either with neutralized collagen solution (Carrier control) or icariin in collagen (3 μg/μL) before replantation into their sockets. The animals were euthanized 2 weeks post-surgery for micro-computed tomography (micro-CT) imaging and histological analyses. Icariin was cytocompatible and significantly reduced the differentiation of TRAP+ MNGCs in a dose-dependent manner compared to the control. Moreover, icariin enhanced alkaline phosphatase activity, expression of osteogenic marker genes and proteins, and calcium deposition in hPDLSCs. Micro-CT imaging of the replanted samples demonstrated a significantly higher volume of remaining roots in the icariin-treated group than in the control group. Histological analysis revealed a marked number of resorptive lacunae with TRAP activity in the control group, whereas icariin-treated samples showed signs of functional healing and reduced osteoclastic activity. Icariin was biocompatible and demonstrated potent anti-osteoclastic and pro-osteogenic properties that reduced resorption and promoted functional healing of denuded roots in a rat maxillary first molar model of replantation. These findings indicate that root surface treatment with icariin may be a clinically relevant and practical method for improving the retention and survival of teeth with compromised PDL after delayed replantation following traumatic avulsion.

Osteogenic properties of bioactive titanium in inflammatory environment.

It is very important that the effects of surface modified titanium on osteogenic differentiation of bone marrow mesenchymal stem cells in the process of bone regeneration. The bio-function of modified titanium could be affected by the inflammatory micro-environment. The aim of this study was to investigate the effects of modified titanium on osteogenic differentiation in the inflammatory conditions and the osteogenic properties of the modified titanium dental implant in vivo. The medical pure titanium metals (PT-Ti) subjected to Anodic Oxidation (AO-Ti), Sand Blasting/acid etching (SLA-Ti) and Plasma-sprayed HA coating (HA coating-Ti) were used for regulating the osteogenic properties of MSCs in the normal and inflammatory conditions. The amount of the MSCs in the inflammatory environment were more similar to that in the non-inflammatory environment after cultured on AO-Ti samples for 7D. However, the proliferation of the MSCs was obviously inhibited on the other groups in the inflammatory condition. The morphology of MSC cells on the modified titanium surface was affected in the inflammatory conditions and the AO-Ti was more conducive to maintain the skeletal morphology of MSCs. The results of osteogenic related proteins expression showed that the amount of BMP-2 on AO-Ti group was the highest in the inflammatory conditions, and followed the order of AO-Ti >HA coating-Ti >SLA-Ti >PT-Ti. What's more, the AO-Ti samples were more beneficial to promote the expression of osteogenic genes ALP, OCN, COL-I and Runx2 in the inflammatory conditions. The results of osteogenic properties in vivo showed that the gingival depth of the AO-Ti group was smaller than that on the other groups. Some new bone could be observed around the AO-Ti implant at two weeks. The bone binding rates on AO-Ti group was the highest of 81.3% after implanted for one year. The AO-Ti was beneficial to osteogenic differentiation than other modified titanium metals in inflammatory condition. The anodic oxidation is an effective surface modification method on titanium to promote bone regeneration.

Geometric Angles and Gene Expression in Cells for Structural Bone Regeneration.

Geometry and angles play crucial roles in cellular processes; however, its mechanisms of regulation remain unclear. In this study, a series of three dimensional (3D)-printed microfibers with different geometries is constructed using a near-field electrostatic printing technique to investigate the regulatory mechanisms of geometry on stem cell function and bone regeneration. The scaffolds precisely mimicked cell dimensions with high porosity and interoperability. Compared with other spatial topography angles, microfibers with a 90° topology can significantly promote the expression of osteogenic gene proteins in bone marrow-derived mesenchymal stem cells (BMSCs). The effects of different spatial structures on the expression profiles of BMSCs differentiation genes are correlated and validated using microRNA sequencing. Enrichment analysis shows that the 90° microfibers promoted osteogenesis in BMSCs by significantly upregulating miR-222-5p/cbfb/Runx2 expression. The ability of the geometric architecture to promote bone regeneration, as assessed using the cranial defect model, demonstrates that the 90° fiber scaffolds significantly promote new bone regeneration and neovascular neural network formation. This study is the first to elucidate the relationship between angular geometry and cellular gene expression, contributing significantly to the understanding of how geometric architecture can promote stem cell differentiation, proliferation, and function for structural bone regeneration.

Exploring the mechanism of Astragali radix for promoting osteogenic differentiation based on network pharmacology, molecular docking, and experimental validation.

The present study used network pharmacology and molecular docking to predict the active ingredients and mechanisms of action of Astragalus radix (AR) to promote osteogenic differentiation of bone marrow mesenchymal stem cells (BM-MSCs), and cell experiments were conducted for verification. First, network pharmacology was used to predict the effective components, targets, and mechanisms of action of AR to promote osteogenic differentiation. The effective components and corresponding target proteins of AR, and the target proteins of osteogenic differentiation were collected through the database. The intersection targets of the two were used for the construction and analysis of a protein-protein interaction (PPI) network. Gene Oncology (GO) and Kyoto Encyclopedia of Genes, and Genomes (KEGG) enrichment analyses were conducted. Next, molecular docking technology was carried out to verify the interaction between the active ingredient and the target protein, and to select the appropriate effective active ingredient. Finally, the results of network pharmacology analysis were verified by in vitro experiments. A total of 95 potential targets were retrieved by searching the intersection of AR and osteogenic differentiation targets. PPI network analysis indicated that RAC-α-serine-threonine-protein kinase (Akt1) was considered to be the most reliable target for AR to regulate osteogenic differentiation. GO enrichment analysis included 21 biological processes, 21 cellular components and 100 molecular functions. KEGG enrichment analysis indicated that the class I phosphatidylinositol-3 kinase (PI3K)-serine-threonine kinase (Akt) signaling pathway may play an important role in promoting osteogenic differentiation. The results of molecular docking showed that quercetin's performance was improved compared with that of kaempferol. In vitro experiments showed that quercetin promoted the expression of osteogenic marker proteins (including collagen I, Runt-related transcription factor 2 and osteopontin) in BMSCs and activated the PI3K/Akt signaling pathway. AR acted on Akt1 targets through its main active component quercetin, and promoted the osteogenic differentiation of BM-MSCs by activating the PI3K/Akt signaling pathway.

The effects of PPARγ inhibitor on bones and bone marrow fat in aged glucocorticoid-treated female rats

Progressive bone marrow (BM) fat accumulation is a common bone loss characteristic in older populations and glucocorticoid (GC)-induced skeletal destruction that is inversely associated with bone synthesis and directly associated with increased peroxisomal proliferator-activated receptor gamma (PPARγ) expression. PPARγ inhibition is an efficient therapeutic strategy for aged- and GC-related skeletal disorders. This study aimed to evaluate the effect of PPARγ inhibition on aged GC-treated female rats. It was hypothesised that bisphenol A diglycidyl ether (BADGE) could inhibit marrow adiposity and improve osteogenesis by inhibiting PPARγ, thereby preventing GC-induced osteoporosis (GIO). Female Sprague–Dawley rats (n = 32, age = 18 months) were randomly allocated to one of the following groups: (1) control, (2) BADGE (30 mg/kg/day, intraperitoneal), (3) methylprednisolone (MP; 30 mg/kg/day, subcutaneous), and (4) MP + BADGE. After eight weeks of treatment, bone density (BD) and trabecular bone microarchitectures were quantified by micro-computed tomography (CT), and BM adipocytes were quantified by histopathology. Additionally, mRNA and protein expression of adipogenic and osteogenic markers were quantified by reverse transcription-quantitative polymerase chain reaction. Furthermore, serum bone turnover biomarker levels were quantified by enzyme-linked immunosorbent assay. MP treatment led to marrow adipogenesis and bone deterioration. However, rats treated with MP + BADGE showed lower marrow adipogenesis, as indicated by smaller marrow adipocyte diameter, decreased density and area percentages, reduced expression of marrow adipogenic genes and proteins, improved BD and trabecular microarchitectures, increased expression of osteogenic genes and proteins, and higher levels of serum bone formation markers. These results were consistent with the differences observed between control and BADGE mono-treated rats. In conclusion, BADGE treatment attenuates BM adiposity and improves bone formation in aged GC-treated female rats by inhibiting PPARγ. Therefore, PPARγ might be a potential target for treating GIO in older populations.

ASPN Synergizes with HAPLN1 to Inhibit the Osteogenic Differentiation of Bone Marrow Mesenchymal Stromal Cells and Extracellular Matrix Mineralization of Osteoblasts.

Bone marrow mesenchymal stromal cells (BMSCs) are major sources of osteogenic precursor cells in bone remodeling, which directly participate in osteoporosis (OP) progression. However, the involved specific mechanisms of BMSCs in OP warrant mass investigations. Initially, our bioinformatics analysis uncovered the prominent up-regulation of Asporin (ASPN) and proteoglycan link protein 1 (HAPLN1) in osteoblasts (OBs) of OP patients and their possible protein interaction. Hence, this study aimed to explore the effects of ASPN and HAPLN1 on osteogenic differentiation of BMSCs, extracellular matrix (ECM) mineralization of OBs, and osteoclastogenesis, hoping to offer research basis for OP treatment. GSE156508 dataset was used for analysis and screening to acquire the differentially expressed genes in OBs of OP patients, followed by the predicative analysis via STRING. OP mouse models were induced by ovariectomy (OVX), and ASPN and HAPLN1 expression was determined. BMSCs and bone marrow macrophages (BMMs) were isolated from OVX mice and induced for osteogenic differentiation and osteoclastogenesis, respectively. After knockdown experiments, we assessed adipogenic differentiation and osteogenic differentiation in BMSCs. Osteogenic (OPN, OCN, and COL1A1) and osteoclast (Nfatc1 and c-Fos) marker protein expression was determined. The binding of ASPN to HAPLN1 was analyzed. High expression of ASPN and HAPLN1 and their protein interaction were observed in OBs of OP patients via bioinformatics and in bone tissues of OVX mice. ASPN interacted with HAPLN1 in BMSCs of OVX mice. ASPN/HAPLN1 knockdown increased ALP, OPN, OCN, and COL1A1 protein expression and ECM mineralization in BMSCs while decreasing Nfatc1 and c-Fos expression in BMMs. These effects were aggravated by the simultaneous knockdown of ASPN and HAPLN1. Our results indicate that ASPN synergises with HAPLN1 to suppress the osteogenic differentiation of BMSCs and ECM mineralization of OBs and promote the osteoclastogenesis in OP.

Triple-functional bone adhesive with enhanced internal fixation, bacteriostasis and osteoinductive properties for open fracture repair.

At present, effective fixation and anti-infection implant materials represent the mainstay for the treatment of open fractures. However, external fixation can cause nail tract infections and is ineffective for fixing small fracture fragments. Moreover, closed reduction and internal fixation during the early stage of injury can lead to potential bone infection, conducive to bone nonunion and delayed healing. Herein, we designed a bone adhesive with anti-infection, osteogenic and bone adhesion fixation properties to promote reduction and fixation of open fractures and subsequent soft tissue repair. It was prepared by the reaction of gelatin (Gel) and oxidized starch (OS) with vancomycin (VAN)-loaded mesoporous bioactive glass nanoparticles (MBGNs) covalently cross-linked with Schiff bases. Characterization and adhesion experiments were conducted to validate the successful preparation of the Gel-OS/VAN@MBGNs (GOVM-gel) adhesive. Meanwhile, in vitro cell experiments demonstrated its good antibacterial effects with the ability to stimulate bone marrow mesenchymal stem cell (BMSCs) proliferation, upregulate the expression of alkaline phosphatase (ALP) and osteogenic proteins (RunX2 and OPN) and enhance the deposition of calcium nodules. Additionally, we established a rat skull fracture model and a subcutaneous infection model. The histological analysis showed that bone adhesive enhanced osteogenesis, and in vivo experiments demonstrated that the number of inflammatory cells and bacteria was significantly reduced. Overall, the adhesive could promote early reduction of fractures and antibacterial and osteogenic effects, providing the foothold for treatment of this patient population.

FOXC1 Promotes Osteoblastic Differentiation of Bone Marrow Mesenchymal Stem Cells via the Dnmt3b/CXCL12 Axis.

Bone defects have remained a clinical problem in current orthopedics. Bone marrow mesenchymal stem cells (BM-MSCs) with multi-directional differentiation ability have become a research hotspot for repairing bone defects. In vitro and in vivo models were constructed, respectively. Alkaline phosphatase (ALP) staining and alizarin red staining were performed to detect osteogenic differentiation ability. Western blotting (WB) was used to detect the expression of osteogenic differentiation-related proteins. Serum inflammatory cytokine levels were detected by ELISA. Fracture recovery was evaluated by HE staining. The binding relationship between FOXC1 and Dnmt3b was verified by dual-luciferase reporter assay. The relationship between Dnmt3b and CXCL12 was explored by MSP and ChIP assays. FOXC1 overexpression promoted calcium nodule formation, upregulated osteogenic differentiation-related protein expression, promoted osteogenic differentiation, and decreased inflammatory factor levels in BM-MSCs, and promoted callus formation, upregulated osteogenic differentiation-related protein expression, and downregulated CXCL12 expression in the mouse model. Furthermore, FOXC1 targeted Dnmt3b, with Dnmt3b knockdown decreasing calcium nodule formation and downregulating osteogenic differentiation-related protein expression. Additionally, inhibiting Dnmt3b expression upregulated CXCL12 protein expression and inhibited CXCL12 methylation. Dnmt3b could be binded to CXCL12. CXCL12 overexpression attenuated the effects of FOXC1 overexpression and inhibited BM-MSCs osteogenic differentiation. This study confirmed that the FOXC1-mediated regulation of the Dnmt3b/CXCL12 axis had positive effects on the osteogenic differentiation of BM-MSCs.

22. The Role of Orai1 in Osteogenic Differentiation Induced by Nanoparticulate Mineralized Collagen Glycosaminoglycan Materials

PURPOSE: Development of synthetic regenerative materials inspired by the extracellular matrix (ECM) has been a topic of significant interest due to the known properties of the ECM to direct cell fate determination via tunable material composition and biomechanical properties. Nanoparticulate mineralized collagen glycosaminoglycan (MC-GAG) is a low density, open-cell foam that has been evaluated in our laboratory to induce osteogenic differentiation of primary osteoprogenitors in vitro as well as regeneration of rabbit skull defects in vivo without pre-seeding with progenitor cells or addition of exogenous growth factors, which was not observed in non-mineralized collagen glycosaminoglycan (Col-GAG) materials. Given that the critical difference between MC-GAG and Col-GAG is the mineral content, the spatial concentration of inorganic ions on MC-GAG may be critical to its osteogenic properties. This is supported by prior research demonstrating that high calcium concentrations in the bone microenvironment stimulate osteoblastic differentiation. How these biochemical cues are transmitted to cells and activate downstream osteogenic signaling pathways should be further elucidated. Orai1 is a critical subunit of store-operated calcium release-activated calcium channels (CRAC) that has been implicated to be involved in bone homeostasis. In this work, we evaluated the contribution of Orai1 to MC-GAG-mediated osteogenesis. METHODS: To examine the role of extracellular calcium signaling through store-operated calcium channels, such as Orai1, on osteogenic differentiation of primary bone marrow-derived human mesenchymal stem cells (hMSCs), we treated 2D cell cultures with a small molecule inhibitor of store-operated calcium entry (SOCE), MRS1845, for 14 days. hMSCs were subsequently seeded on MC-GAG or Col-GAG for 7 days with or without MRS1845. Baseline Orai1 gene and protein expression was evaluated. Next, small interfering RNAs (siRNAs) targeting ORAI1 and a scrambled control were used to specifically knockdown ORAI1 expression in hMSCs cultured on Col-GAG and MC-GAG. Osteogenic gene and protein expression were measured using quantitative RT-PCR and western blot analyses, respectively. Mineralization was evaluated by Alizarin Red staining. RESULTS: To understand whether store-operated calcium entry was essential to osteogenic differentiation, we treated hMSCs in 2D cultures with a small molecule inhibitor of SOCE, MRS1845, and found a reduction in calcium depositions visualized with Alizarin Red staining when compared to untreated hMSCs. In 3D cultures, MRS1845 downregulated the gene expression of early osteogenic marker ALP and protein expression of the intracellular osteogenic mediator Runx2 specifically on MC-GAG compared to controls. As small molecule inhibitors lack channel specificity, we knocked down ORAI1 expression through siRNA transfection. When MC-GAG was compared with Col-GAG, baseline ORAI1 gene expression was 1.8-fold higher (p=0.02) and Orai1 protein expression was upregulated (p=0.003). ORAI1 knockdown reduced the protein expression of Runx2 and gene expression of late osteogenic marker BSP2 specifically on MC-GAG compared to scrambled control siRNA. Mineralization significantly diminished on MC-GAG with ORAI1 knockdown, whereas no effects were evident on Col-GAG as demonstrated by Alizarin Red staining. CONCLUSIONS: ORAI1-mediated calcium ion signaling was required for MC-GAG-induced osteogenic differentiation. Further elucidation of the osteogenic mechanisms and refinement of calcium levels on MC-GAG may facilitate its clinical application in the reconstruction of osseous defects.

Osteogenesis promotion by injectable methacryloylated gelatin containing psoralen and its bacteriostatic properties.

The treatment of periodontitis focuses on controlling the progression of inflammation, reducing plaque accumulation, and promoting bone tissue reconstruction. Among them, the reconstruction of irregular bone resorption caused by periodontitis is a long-standing challenge. At present, the local drug treatment of periodontitis is mainly anti-inflammatory and antibacterial drugs. In this study, psoralen (Pso), a Chinese herbal medicine with anti-inflammatory, antibacterial, and osteogenic effects, was selected for the local treatment of periodontitis. Meanwhile, an injectable methacrylate gelatin (GelMA) platform loading with Pso was constructed. Pso-GelMA had the properties of fluidity, light cohesion, self-healing, and slow release, which could be better used in the deep and narrow structure of the periodontal pocket, and greatly increased the effectiveness of local drug delivery. The pore size of Gelma hydrogel did not change after loading Pso by SEM. In vitro, Pso-GelMA effectively upregulated the expression of osteogenic genes and proteins, increased alkaline phosphatase activity, promoted the mineralisation of rat bone marrow mesenchymal stem cells (BMSCs) extracellular matrix, and had significant antibacterial effects on Staphylococcus aureus and Fusobacterium nucleatum. Therefore, Pso-GelMA has immense promise in the adjuvant treatment of periodontitis.

Support-less ceramic 3D printing of bioceramic structures using a hydrogel bath

Volumetric bone tissue defects are beyond the intrinsic regenerative capacity of bone tissue. With the recent development of ceramic 3D printing, various bioceramic scaffolds that can induce bone regeneration are being actively developed. However, hierarchical bone is complex, with overhanging structures that require additional sacrificial support during ceramic 3D printing. Not only can this increase the overall process time and material consumption, but breaks and cracks may occur when sacrificial supports are removed from fabricated ceramic structures. In this study, a support-less ceramic printing (SLCP) process using a hydrogel bath was developed to facilitate the manufacture of complex bone substitutes. A hydrogel bath, consisting of pluronic P123 with temperature-sensitive properties, mechanically supported the fabricated structure when the bioceramic ink was extruded into the bath and promoted the cement reaction to cure the bioceramic. SLCP enables the fabrication of complex bone constructs with overhanging structures, such as the mandible and maxillofacial bones, with reduced overall processing time and material consumption. Scaffolds fabricated by SLCP showed more cell adhesion, higher cell growth rate, and osteogenic protein expression due to their rougher surface than conventionally printed scaffolds. Hybrid scaffolds were fabricated by SLCP to co-print cells and bioceramics, and SLCP provided a cell-friendly environment, exhibiting high cell viability. SLCP enables control of the shape of various cells, bioactive substances, and bioceramics and thus can be used as an innovative 3D bioprinting technique to manufacture complex hierarchical bone structures.

Uniaxial cyclic stretch enhances osteogenic differentiation of OPLL-derived primary cells via YAP-Wnt/β-catenin axis.

The pathogenesis of posterior longitudinal ligament ossification (OPLL) remains inadequately understood. Mechanical stimulation is one of the important pathogenic factors in OPLL. As one of the mechanical stimulation transduction signals, the yes-associated protein (YAP) interacts with the Wnt/β-catenin signalling pathway, which plays an important role in osteogenic differentiation. This study aimed to demonstrate the role of YAP-Wnt/β-catenin axis in cell differentiation induced by mechanical stress. Primary cells extracted from posterior longitudinal ligament tissues from OPLL or non-OPLL patients were subjected to sinusoidal uniaxial cyclic stretch (5 %, 0.5 Hz, 3 d). The expression of runt-related transcription factor 2, collagen I, osterix, osteocalcin and alkaline phosphatase were compared between the static and the experimental groups. In addition, the cytoskeleton was detected using phalloidin staining while YAP phosphorylation states and nuclear location were identified using immunofluorescence. The results showed that mechanical stretching loading increased the expression of osteogenic genes and proteins in the OPLL group, while it had no significant effect on the control group. When OPLL cells were stretched, YAP exhibited an obvious nuclear translocation and the Wnt/β-catenin pathway was activated. Knocking down YAP or β-catenin could weaken the impact upon osteogenic differentiation induced by mechanical stimulation. YAP-mediated mechanical stimulation promoted osteogenic differentiation of OPLL cells through Wnt/β-catenin pathway and this progress was independent of the Hippo pathway.

Physico-biological and in vivo evaluation of irisin loaded 45S5 porous bioglass granules for bone regeneration

In this study, we investigated the physico-biological and in-vivo evaluation of irisin loaded 45S5 bioglass bone graft for enhancing osteoblastic differentiation and bone regeneration in rat femur head defect model. Highly porous structure was obtained in the bioglass by burn-out process with varying the concentration of poly (methyl methacrylate) (PMMA) spheres. 10 % polyvinyl alcohol (PVA) was used as a binder for the sustain releasing of irisin on porous bioglass. Different concentrations of irisin were loaded on the selected bioglass samples and these were further evaluated for the biocompatibility and osteoblastic differentiation properties. The in vitro results demonstrated not only its biocompatibility but also that it stimulated pre-osteoblast differentiation. The in vivo data showed new bone formation as well as expression of osteogenic proteins like alkaline phosphatase (ALP), Runt-related transcription factor 2 (Runx-2), osteopontin (OPN), and collagen-1 (Col-1). Our results support the use of irisin loaded bioglass for the use of early bone regeneration.

Study on modification of hydroxyapatite/magnesium phosphate bone cement by N-acetyl-l-cysteine

Magnesium phosphate cement has good biological activity and degradation performance. However, it still has the defects of poor strength and water resistance. N-acetyl-l-cysteine has good osteogenic properties. The nano-hydroxyapatite/magnesium phosphate cement was modified by N-acetyl-l-cysteine, and the effects of N-acetyl-l-cysteine on the strength, degradation and biological activity of nano-hydroxyapatite/magnesium phosphate cement were studied. The results showed that the compressive strength of 0.5 wt% N-acetyl-l-cysteine modified nano-hydroxyapatite/magnesium phosphate cement could reach 76.1 ± 1.4 MPa after soaking in simulated body fluid for 28 days, which was 6.3% higher than that of the control group (the content of N-acetyl-l-cysteine was 0 wt%), and the softening coefficient of each age was higher than that of the control group. Cell experiments proved that N-acetyl-l-cysteine could effectively promote cell proliferation and improve the expression of osteogenic related genes and proteins. After implanting the composite bone cement into rats’ femurs for 12 weeks, the materials were gradually wrapped and absorbed, and the new bone tissue grew from outside to inside, indicating that N-acetyl-l-cysteine bone cement had an good ability to promote bone formation. Therefore, the composite bone cement of this study has potential application prospects in clinical bone repair.

Bioactive graphene oxide-functionalized self-expandable hydrophilic and osteogenic nanocomposite for orthopaedic applications.

Polymethyl methacrylate (PMMA) bone cement (PBC) is commonly used in orthopaedic surgery. However, polymerization volumetric shrinkage, exothermic injury, and low bioactivity prevent PBC from being an ideal material. The developed expandable P(MMA-AA-St) well overcomes the volumetric shrinkage of PBC. However, its biomechanical properties are unsatisfactory. Herein, graphene oxide (GO), a hydrophilic material with favourable biomechanics and osteogenic capability, was added to P(MMA-AA-St) to optimize its biomechanics and bioactivity. The GO-modified self-expandable P(MMA-AA-St)-GO nanocomposite (PGBCs) exhibited outstanding compressive strength (>70​MPa), water absorption, and volume expansion, as well as a longer handling time and a reduced setting temperature. The cytocompatibility of PGBCs was superior to that of PBC, as demonstrated by CCK-8 assay, live-dead cell staining, and flow cytometry. In addition, better osteoblast attachment was observed, which could be attributed to the effects of GO. The improved level of osteogenic gene and protein expression further illustrated the improved cell-material interactions between osteoblasts and PGBCs. The results of an in vivo study performed by filling bone defects in the femoral condyles of rabbits with PGBCs demonstrated promising intraoperative handling properties and convenient implantation. Blood testing and histological staining demonstrated satisfactory in vivo biosafety. Furthermore, bone morphological and microarchitecture analyses using bone tissue staining and micro-CT scanning revealed better bone-PGBCs contact and osteogenic capability. The results of this study indicate that GO modification improved the physiochemical properties, cytocompatibility, and osteogenic capability of P(MMA-AA-St) and overcame the drawbacks of PBC, allowing its material derivatives to serve as effective implantable biomaterials.

Biomimetic, biodegradable and osteoinductive treated dentin matrix/α-calcium sulphate hemihydrate composite material for bone tissue engineering.

It is still a huge challenge for bone regenerative biomaterial to balance its mechanical, biological and biodegradable properties. In the present study, a new composite material including treated dentin matrix (TDM) and α-calcium sulphate hemihydrate (α-CSH) was prepared. The optimal composition ratio between TDM and α-CSH was explored. The results indicate that both components were physically mixed and structurally stable. Its compressive strength reaches up to 5.027 ± 0.035 MPa for 50%TDM/α-CSH group, similar to human cancellous bone tissues. Biological experiments results show that TDM/α-CSH composite exhibits excellent biocompatibility and the expression of osteogenic related genes and proteins (ALP, RUNX2, OPN) is significantly increased. In vivo experiments suggest that the addition of TDM for each group (10%, 30%, 50%) effectively promotes cell proliferation and osteomalacia. In addition, 50% of the TDM/α-CSH combination displays optimal osteoconductivity. The novel TDM/α-CSH composite is a good candidate for certain applications in bone tissue engineering.

Peptide derived from stromal cell-derived factor 1δ enhances the in vitro expression of osteogenic proteins via bone marrow stromal cell differentiation and promotes bone formation in in vivo models.

Mesenchymal stem cells (MSCs) rely on chemokines and chemokine receptors to execute their biological and physiological functions. Stromal cell-derived factor-1 (SDF-1) is upregulated in injury sites, where it acts as a chemotactic agent, attracting CXCR4-expressing MSCs, which play a pivotal role in the healing and regeneration of tissue throughout the body. Furthermore, SDF-1 expression has been observed in regions experiencing inflammation-induced bone destruction and fracture sites. In this study, we identified a novel peptide called bone-forming peptide-5 (BFP-5), derived from SDF-1δ, which can promote the osteogenesis of MSCs as well as bone formation and healing. Multipotent bone marrow stromal cells treated with BFP-5 showed enhanced alizarin red S staining and higher alkaline phosphatase (ALP) activity. Moreover, ALP and osterix proteins were more abundantly expressed when cells were treated with BFP-5 than SDF-1α. Histology and microcomputed tomography data at 12 weeks demonstrated that both rabbit and goat models transplanted with polycaprolactone (PCL) scaffolds coated with BFP-5 showed significantly greater bone formation than animals transplanted with PCL scaffolds alone. These findings suggest that BFP-5 could be useful in the development of related therapies for conditions associated with bones.

Engineered nanostructure fibrous cell-laden biointerfaces integrating Fe3O4/SrO2-fMWCNTs induce osteogenesis and anti-bacterial effect

Improving biomechanical and biochemical properties of tissue-engineered scaffolds akin to those of native stem-cell niches can effectively regenerate tissues. Bio-ceramic nanomaterials integrated porous scaffolds can be employed to promote bone cell proliferation and contribute to their translational value. Here, we successfully developed highly conductive fibrous scaffolds of polyurethane (PU) integrating Fe3O4/SrO2 nanoparticles (NPs) in association with functionalized multiwall carbon nanotubes (fMWCNTs). The engineered scaffold of PU-Fe3O4/SrO2-fMWCNTs with 0.4 wt.% of NPs showed synergistic effects on physicochemical and biological performances. The porous scaffold showed superior interfacial biocompatibility, antibacterial properties, and load-bearing ability. Results of in vitro, including ALP activity, collagen-I, and ARS staining of MC3T3-E1 cells confirmed that the scaffold provided a favorable microenvironment with a prominent effect on the growth, proliferation, and differentiation of MC3T3-E1 cells. Furthermore, the up-regulated osteogenic protein expression of MC3T3-E1 cells was studied by qRT-PCR, and Western blotting and found the osteoblastic activity accelerated due to the enhanced mineralization of PU-Fe3O4/SrO2-fMWCNTs (0.4 wt.%). Together, our findings suggest these scaffolds with improved cell-interface compatibility exhibit osteoinductivity that could become a novel nanomaterial-based tissue construct as a therapeutic strategy for bone cell regeneration and bone defect repair.

Protective Effect of Photobiomodulation against Hydrogen Peroxide-Induced Oxidative Damage by Promoting Autophagy through Inhibition of PI3K/AKT/mTOR Pathway in MC3T3-E1 Cells.

Photobiomodulation (PBM) has been repeatedly reported to play a major role in the regulation of osteoblast proliferation and mineralization. Autophagy is closely associated with various pathophysiological processes in osteoblasts, while its role in oxidative stress is even more critical. However, there is still no clear understanding of the mechanism of the role of autophagy in the regulation of osteoblast mineralization and apoptosis under oxidative stress by PBM. It was designed to investigate the impact of 808 nm PBM on autophagy and apoptosis in mouse preosteoblast MC3T3-E1 treated with hydrogen peroxide (H2O2) through PI3K/AKT/mTOR pathway. PBM could inhibit MC3T3-E1 cell apoptosis under oxidative stress and promote the expression of osteogenic proteins, while enhancing the level of autophagy. In contrast, 3-methyladenine (3-MA) inhibited the expression of osteoblast autophagy under oxidative stress conditions, increased apoptosis, and plus counteracted the effect of PBM on osteoblasts. We also found that PBM suppressed the activated PI3K/AKT/mTOR pathway during oxidative stress and induced autophagy in osteoblasts. PBM promoted autophagy of MC3T3 cells and was further blocked by 740 Y-P, which reversed the effect of PBM on MC3T3 cells with H2O2. In conclusion, PBM promotes autophagy and improves the level of osteogenesis under oxidative stress by inhibiting the PI3K/AKT/mTOR pathway. Our results can lay the foundation for the clinical usage of PBM in the treatment of osteoporosis.

Osteogenic differentiation and proliferation potentials of human bone marrow and umbilical cord-derived mesenchymal stem cells on the 3D-printed hydroxyapatite scaffolds

Mesenchymal stem cells (MSCs) are a promising candidate for bone repair. However, the maintenance of MSCs injected into the bone injury site remains inefficient. A potential approach is to develop a bone-liked platform that incorporates MSCs into a biocompatible 3D scaffold to facilitate bone grafting into the desired location. Bone tissue engineering is a multistep process that requires optimizing several variables, including the source of cells, osteogenic stimulation factors, and scaffold properties. This study aims to evaluate the proliferation and osteogenic differentiation potentials of MSCs cultured on 2 types of 3D-printed hydroxyapatite, including a 3D-printed HA and biomimetic calcium phosphate-coated 3D-printed HA. MSCs from bone marrow (BM-MSCs) and umbilical cord (UC-MSCs) were cultured on the 3D-printed HA and coated 3D-printed HA. Scanning electron microscopy and immunofluorescence staining were used to examine the characteristics and the attachment of MSCs to the scaffolds. Additionally, the cell proliferation was monitored, and the ability of cells to differentiate into osteoblast was assessed using alkaline phosphatase (ALP) activity and osteogenic gene expression. The BM-MSCs and UC-MSCs attached to a plastic culture plate with a spindle-shaped morphology exhibited an immunophenotype consistent with the characteristics of MSCs. Both MSC types could attach and survive on the 3D-printed HA and coated 3D-printed HA scaffolds. The MSCs cultured on these scaffolds displayed sufficient osteoblastic differentiation capacity, as evidenced by increased ALP activity and the expression of osteogenic genes and proteins compared to the control. Interestingly, MSCs grown on coated 3D-printed HA exhibited a higher ALP activity and osteogenic gene expression than those cultured on the 3D-printed HA. The finding indicated that BM-MSCs and UC-MSCs cultured on the 3D-printed HA and coated 3D-printed HA scaffolds could proliferate and differentiate into osteoblasts. Thus, the HA scaffolds could provide a suitable and favorable environment for the 3D culture of MSCs in bone tissue engineering. Additionally, biomimetic coating with octacalcium phosphate may improve the biocompatibility of the bone regeneration scaffold.