Excitation Transfer Research Articles

Visual Eosin Y-Based Photosensitization Sensing Systems for Ultrasensitive Detection of Diclofenac with Single-Atom Co─N2O2 Site-Immobilized g-C3N4 Nanosheets.

It is highly desired to develop a visual sensing system for ultrasensitive detection of colorless diclofenac (DCF), yet with a significant challenge. Herein, a novel dye-based photosensitization sensing system has been successfully developed for detecting DCF for the first time, in which the used dye eosin Y (DeY) can strongly absorb visible light and then be decolorized obviously by transferring photogenerated electrons to g-C3N4 nanosheets (CN), while the built single-atomic Co─N2O2 sites on CN by boron-oxygen connection can competitively adsorb DCF to impede the photosensitization decoloration of DeY. This system exhibits a broad detection range from 8ngL-1 to 2 mgL-1 with 535nm light, an exceptionally low detection limit (3.5ngL-1), and remarkable selectivity. Through the time-resolved, in situ technologies, and theoretical calculations, the decolorization of DeY is attributed to the disruption of DeY's conjugated structure caused by the triplet excited state electron transfer from DeY to CN, meanwhile, the adsorbed oxygen facilitates the charge transfer process. The preferential adsorption of DCF mainly depends on the strong interactions between the as-constructed single-atom Co and Cl in DCF. This study opens an innovative light-driven sensing system by combining dye and single-atom metal/nanomaterial for visually intuitive detection of environmental pollutants.

Multireference Ab Initio Calculations on Excited Electronic States of Carbazole-Based Organic Compounds for Thermally Activated Delayed Fluorescence.

The emerging technology of organic light-emitting diodes takes advantage of the thermally activated delayed fluorescence (TADF) mechanism for improved efficiency. Carbazole-based organic molecules are suitable for TADF emission because of charge transfer excitations between the electron-donor carbazole and an electron-acceptor unit. Computational design of new TADF molecules with the desired properties is challenging because charge-transfer excitations cannot be predicted accurately by time-dependent density functional theory. Four groups of carbazole-based donor-acceptor molecules have been studied using multireference ab initio methods to understand the nature of excited electronic states. The state-averaged complete active space self-consistent field (SA-CASSCF) and the N-electron valence state perturbation theory (NEVPT2) were used to calculate energies and oscillator strengths for multiple excited electronic states. The number of active electrons and orbitals and the number of excited states included in state-averaged CASSCF were selected such that the accuracy of ab initio predictions could be improved systematically. The procedure introduced here for the calculation of multiple excited electronic states of TADF candidates can be used to accelerate the computational search for efficient TADF materials.

Novel ratiometric fluorescent probe with large Stokes shift for selective sensing and imaging of Zn2+ in live cell

A novel ratiometric fluorescent probe, namely 5-[(3-dicyanoylidene −5.5-dimethyl) cyclohexenyl-1-ethenyl] salicylaldehyde-3′-hydroxybenzohydrazone (DCSH) is presented for the selective sensing of Zn2+ ion in acetonitrile/water (2/3, pH 7.4) solution. Introducing Zn2+ ions notably caused the peak emission of DCSH to shift from 560 nm to 646 nm, accompanied with a significant enhancement of its intensity. A vivid change in fluorescence color from yellow to red facilitated the immediate identification of Zn2+ ions by visual observation. DCSH exhibits substantial Stokes shifts (110 and 196 nm), rapid detection capability (within 10 s) and high sensitivity to Zn2+ ions, achieving a limit of detection of 31.2 nM. The response mechanism is supposed to involve the block of C = N bond isomerization and excited state intramolecular proton transfer (ESIPT) along with the enhancement of fluorescence through chelation (CHEF) effect. DCSH was effectively utilized for ratiometric fluorescence imaging to monitor exogenous Zn2+ concentrations in HeLa cells. Significantly, DCSH is capable of monitoring elevated levels of Zn2+ ion during apoptosis induced by L-Buthionine sulfoximine (BSO).

Excited Charge Transfer Promoted Electron Transfer in all Perylenediimide Derived, Wide-Band Capturing Conjugates: A Mimicry of the Early Events of Natural Photosynthesis.

Fundamental discoveries in electron transfer advance scientific and technological advancements. It is suggested that in plant and bacterial photosynthesis, the primary donor, a chlorophyll or bacteriochlorophyll dimer, forms an initial excited symmetry-breaking charge transfer state (1CT*) upon photoexcitation that subsequently promotes sequential electron transfer (ET) events. This is unlike monomeric photosensitizer-bearing donor-acceptor dyads where ET occurs from the excited donor or acceptor (1D* or 1A*). In the present study, we successfully demonstrated the former photochemical event using an excited charge transfer molecule as a donor. Electron-deficient perylenediimide (PDI) is functionalized with three electron-rich piperidine entities at the bay positions, resulting in a far-red emitting CT molecule (DCT). Further, this molecule is covalently linked to another PDI (APDI) carrying no substituents at the bay positions, resulting in wide-band capturing DCT-APDI conjugates. Selective excitation of the CT band of DCT in these conjugates leads to an initial 1DCT* that undergoes subsequent ET involving APDI, resulting in DCT +-APDI - charge separation product (kCS~109 s-1). Conversely, when APDI was directly excited, ultrafast energy transfer (ENT) from 1APDI* to DCT (kENT~1011 s-1) followed by ET from 1DCT* to PDI is witnessed. While increasing solvent polarity improved kCS rates, for a given solvent, the magnitude of the kCS values was almost the same, irrespective of the excitation wavelengths. The present findings demonstrate ET from an initial CT state to an acceptor is key to understanding the intricate ET events in complex natural and bacterial photosynthetic systems possessing multiple redox- and photoactive entities.

Excited-State Charge Transfer Coupling from Quasiparticle Energy Density Functional Theory.

The recently developed Quasiparticle Energy (QE) scheme, based on a DFT calculation with one more (or less) electron, offers a good description of excitation energies, even with charge transfer characters. In this work, QE is further extended to calculate electron transfer (ET) couplings involving two excited states. We tested it with a donor-acceptor complex, consisting of a furan and a 1,1-dicyanoethylene (DCNE), in which two low lying charge transfer and local excitation states are involved. With generalized Mülliken-Hush and fragment charge-difference schemes, couplings from the QE approach generally agree well with those obtained from TDDFT, except that QE couplings exhibit better exponential distance dependence. Couplings from half-energy gaps with an external field are also calculated and reported. Our results show that the QE scheme is robust in calculating ET couplings with greatly reduced computational time.

A theoretical study of the photochemistry of 1,3-cyclopentadiene and its cyano derivatives bound to a water dimer: Assessing reactivity of ionized clusters and possible photoproducts

We theoretically investigate the photoionization scenarios of molecular complexes involving cyclopentadiene and cyanocyclopentadiene bound to water dimers. Using electronic structure calculations within density-functional theory (DFT) and time dependent DFT (TD-DFT), we explore the potential photochemical pathways following ionization, and determine the charge transfer excitations related to the possible subsequent reactions. Our findings suggest that the investigated photochemical pathways of the hydrated complexes take place in two well-defined ultraviolet regions: (i) 8.2–9.5 eV for the cyclic compounds and (ii) 11.2–11.4 eV for the bound water dimer. We quantify how H-bonding effects can influence the photoionization channels. Before forming possible photoproducts, we also examine the regiospecificity of OH addition to 1,3-cyclopentadiene and its cyano derivatives We analyze our results in light of photoionization studies of jet-cooled molecular complexes and possible implications in astrochemical environments.

Unveiling the molecular symphony - A DFT exploration of structure, electronic dynamics, and excited state electron transfer in D-π-A systems, enhanced by TeO2@GQD multi-junctions for solar energy conversion in DSSC

Graphene and graphene-derived materials have sparked a lot of interest because of their unique physico-chemical features, that have positioned graphene as a promising material for future opto-electronics, and energy-harvesting devices. Graphene possesses outstanding mechanical characteristics and chemical inertness, as well as great mobility and optical transparency. Single-layer graphene has a high optical transmissivity that allows it to pass through a wide variety of light wavelengths, making it a popular material for optically conducting windows. Graphene-based metal and metal oxide nanocomposites require substantial investigations to understand the fundamental interactions between nanostructures and the graphene surface in DSSC, for understanding the characteristic features of such nanocomposites. In the present study different donor-π-acceptor, systems were used, which are different in the type of the π –spacer units only. This D-π-A system was then decorated on a (TiO2)9 semiconductor leading to shifting of the absorption wavelength, the absorbed wavelength was further shifted upon interaction with tellurium–oxide@graphene, thereby exploring its application in solar energy harvesting devices. The result of such substitution was assessed in terms of various parameters such as highest occupied molecular orbital (HOMO), least unoccupied molecular orbital (LUMO), energy gap (Egap), maximum wavelength (λmax), the free energy of electron injection efficiency (ΔGinject), open-circuit voltage (Voc), reorganization energy (Δreorg), etc by the DFT method with Gaussian 09 set of codes. The study can prove beneficial for understanding the mechanism of high optical absorption over a broad spectrum in such multijunction systems, the feature which makes them promising materials for efficient optical, electronic, and light-harvesting devices.

Multifold Enhanced Photon Upconversion in a Composite Annihilator System Sensitized by Perovskite Nanocrystals.

Photon upconversion via triplet-triplet annihilation (TTA-UC) provides a pathway to overcoming the thermodynamic efficiency limits in single-junction solar cells by allowing the harvesting of sub-bandgap photons. Here, we use mixed halide perovskite nanocrystals (CsPbX3, X = Br/I) as triplet sensitizers, with excitation transfer to 9,10-diphenylanthracene (DPA) and/or 9,10-bis[(triisopropylsilyl)ethynyl]anthracene (TIPS-An) which act as the triplet annihilators. We observe that the upconversion efficiency is five times higher with the combination of both annihilators in a composite system compared to the sum of the individual single-acceptor systems. Our work illustrates the importance of using a composite system of annihilators to enhance TTA upconversion, demonstrated in a perovskite-sensitized system, with promise for a range of potential applications in light-harvesting, biomedical imaging, biosensing, therapeutics, and photocatalysis.

Detection mechanism and solvent effects of the 3‐hydroxy‐2‐(4‐(pyrrolidin‐1‐yl)phenyl)benzo[g]quinolin‐4(1H)‐one (PBQ) probe

AbstractHydroxy‐2‐(4‐(pyrrolidin‐1‐yl)phenyl)benzo[g]quinolin‐4(1H)‐one (PBQ) is a ratiometric fluorescent probe based on excited‐state intramolecular proton transfer (ESIPT). PBQ‐1 is the reaction product following its exposure to phosgene. Density functional theory (DFT) and time dependent density functional theory (DFT) have been used to study the excited state dynamics of PBQ and PBQ‐1 in different solvents. The results show that the reaction of PBQ with a transition from charge‐transfer excitation to local excitation before and after the reaction. It becomes more difficult for PBQ in the excited state to transfer proton with increasing solvent polarity. The product PBQ‐1 undergoes a molecular structure twist, and the angle of twisting decreases with increasing solvent polarity, resulting in a lower degree of rotational freedom of the hydroxyl group (5‐OH) at the 5th carbon position, which makes it more susceptible to ESIPT reactions. Therefore, PBQ‐1 is more susceptible to ESIPT as solvent polarity increases. Our theoretical calculations also elucidate the cause of the blue shift of PBQ fluorescence and the impact of the twisting intramolecular charge transfer phenomenon on the solvent effect. Furthermore, our study provides the theoretical guidance for the designing probe based on excited state intramolecular proton transfer.

Controlled Self‐Assembly of Zn–Tetraphenylporphyrins for Efficient Photocatalytic Solar H2 Production and Simultaneous Organic Transformation to Valuable Chemicals

Herein, we have designed aqueous dispersed self‐assembled nanostructures with diverse morphologies from the zinc tetraphenyl porphyrin (ZnTPP) monomer employing a simple solution‐based coprecipitation methods. Detail morophological studies have been carried out by various electron microscopy techniques. Finally, the structural features were correlated with the underpinning photophysical processes using steady‐state and time‐resolved spectroscopy. Detailed studies suggest that control morphology and highly defined intermolecular interactions affect the overall photoinduced charge transfer process. Based on the fundamental investigations, all these different types of nanostructures have been utilized as photocatalysts for solar hydrogen production, without using any cocatalysts, and it was found that the spherical nanostructure exhibits significantly higher H2 production rates of ~1682 m mole/ g, which is few folds higher than other 1D and 2D nanostructured materials. The experimental findings were further supported by the TD‐DFT study. Furthermore, the detailed computational studies suggest that the spherical aggregates exhibited a more vital interaction between the ZnTPP molecules, causes significant electronic coupling between bright local excited and charge transfer states, which supports our experimental findings. Finally, we have selectively utilized the oxidative half‐reaction for the simultaneous transformation of glycerol to valuable chemicals along with photocatalytic H2 production through reductive half‐reaction.

Tautomeric enhancement of 2-(1H-pyrazol-5-yl)pyridine in photoinduced proton transfer by water-assisted molecules

Theoretical insight of excited state proton transfer (ESPT) in 2-(1H-pyrazol-5-yl)pyridine abbreviated as PPP interacting with water wires: PPP(H2O)n where n = 13 has been presented in both static and dynamics studies. Explicit water molecules placed around PPP have been simulated to elucidate the intermolecular hydrogen bonding interactions between them. Hydrogen bond strengthening in the excited state (S1) has been verified by shorter bond distances and redshift of IR vibrational spectra involving the proton transfer (PT) process. Furthermore, on-the-fly excited state dynamics simulations of all complexes have been performed to provide detailed information on the PT mechanism. The dynamic results show that one water molecule added to the neighboring PPP as an intermolecular hydrogen bonding bridge can promote double excited state intermolecular proton transfer up to 36% compared with its intrinsic intramolecular hydrogen bond of the PPP system. Meanwhile adding a second or third water molecule could decrease the probabilities of PT. Especially in PPP(H2O)3, a rearrangement of water molecules is observed that PT occurs via one water molecule. Hence, the models with explicit water molecules interacting with PPP as intermolecular hydrogen bonding bridge are a great representative role played by water molecules of the PT process at the molecular level.

Electronic Couplings and Conversion Dynamics between Localized and Charge Transfer Excitations from Many-Body Green's Functions Theory.

We investigate the determination of electronic coupling between localized excitations (LEs) and charge-transfer (CT) excitations based on many-body Green's functions theory in the GW approximation with the Bethe-Salpeter equation (GW-BSE). Using a small molecule dimer system, we first study the influence of different diabatization methods, as well as different model choices within GW-BSE, such as the self-energy models or different levels of self-consistency, and find that these choices affect the LE-CT couplings only minimally. We then consider a large-scale low-donor morphology formed from rubrene and fullerene and evaluate the LE-CT couplings based on coupled GW-BSE-molecular mechanics calculations. For these disordered systems of bulky molecules, we observe differences in the couplings based on the Edmiston-Ruedenberg diabatization compared to the more approximate Generalize Mulliken-Hush and fragment charge difference diabatization formalisms. In a kinetic model for the conversion between LE and CT states, these differences affect the details of state populations in an intermediate time scale but not the final populations.

A near-infrared fluorescent probe with thiadiazole unit as key skeleton for ICT and ESIPT mechanism and effective detection of Cu2+

Fluorescent probe L-I was synthesized to demonstrate that 1,3,4-thiadiazole is an attractive moiety and could be utilized as positive hydrogen bond acceptor for excited state intramolecular proton transfer (ESIPT) processes, guider of electrons movement for intramolecular charge transfer (ICT) process and identify group for mental ions. Furthermore, dicyanoisophorone framework was employed to improve the fluorescence characteristics and near-infrared (NIR) fluorescent emission at 695 nm accompanied by a Stoke's shift as large as 260 nm was obtained. L-I could selectively detect Cu2+ over other analytes taking advantages of high sensitivity, fast response within 30 s and low detection limit (0.026 μM). More important, L-I exhibited good performance for detection of Cu2+ in actual water samples, food products, traditional Chinese medicine and for cell imaging which demonstrates practical significance in the fields of environmental monitor, food safety and biotechnology.

Photoluminescence Study of Undoped and Eu-Doped Alkali-Niobate Aluminosilicate Glasses and Glass-Ceramics.

In this study, the photoluminescence (PL) behavior of two aluminosilicate glass series containing alkali-niobates ranging from 0.4 to 20 mol% was investigated. The glasses exhibit an intense visible emission centered at ~18,400 cm-1 for the peralkaline series and at higher energies (~19,300 cm-1) for the metaluminous glasses. However, the photoluminescence emission intensity varies significantly with the niobate content and the bulk chemistry. PL and fluorescence lifetime measurements indicate that the broad emission bands result from the overlap of different niobate populations, whose distribution changes with niobate content. The distinct PL behavior in the two glass series was related to the structural evolution of the niobate units upon niobium addition. An enhancement of the visible emission was observed for a higher fraction of distorted [NbO6] units. Eu-doping was carried out as a structural probe of the glass network, and also to determine if these glasses could be used as potential rare earth element (REE) activators. The crystal field strength around Eu ions is strongly dependent on the bulk chemistry and the niobate content. Furthermore, the peralkaline series showed energy transfer from the host [NbO6] to Eu3+, confirming the feasibility of exploring niobate glasses and glass-ceramics as lanthanide ion-activated luminescent materials. In addition, glass-ceramics (GCs) containing alkali-niobate phases with a perovskite-like structure were developed and studied to verify the optical performance of these materials. It was verified that the bulk chemistry influences crystallization behavior, and also the photoluminescence response. The transparent GC from the metaluminous series exhibits a quenching of the Eu3+ emission, whereas an enhanced emission intensity is observed for the peralkaline GC. The latter shows a strong excitation-dependent PL emission, suggesting energy transfer and migration of electronic excitation from one Eu population to another. Additionally, Eu3+ emissions arising from the D15 and D25 excited states were observed, highlighting the low phonon energy achievable in niobo-aluminosilicate hosts.

Influence of Solvents and Halogenation on ESIPT of Benzimidazole Derivatives for Designing Turn-on Fluorescence Probes.

This work reports a theoretical investigation of the solvent polarity as well as the halogenation of benzimidazole derivatives during excited state intramolecular proton transfer (ESIPT). It details how the environment and halogen substitution may contribute to the efficiency of ESIPT upon keto-enol tautomerism and exploits this effect to design fluorescence sensing. For this purpose, we first examine the conformational equilibrium of benzimidazole derivatives containing different halogen atoms, which results in intramolecular proton transfer, using density-functional theory (DFT) combined with the polarizable continuum model (PCM). Then we evaluate the fluorescence of the benzimidazole derivatives in different dielectric constants within time-dependent DFT (TD-DFT) approaches. Our results quantitatively allow the determination of large Stokes shifts in nonpolar solvents around 100 nm. These theoretical results are in agreement with experimental solvatochromism studies of benzimidazoles. The effect of halogenation, with fluorine, chlorine, and bromine, is less important than solvent polarization when ESIPT takes place. Thus, halogenation can be properly chosen depending on the interest of the synthesis of benzimidazole-based turn-on fluorescence in appropriate solvents.

Concerning for the solvent-polarity-dependent conformational equilibrium and ESIPT mechanism in Pz3HC system: A novel insight

In this report, we propose a new insight into the interaction between the solvent-polarity-dependent conformational equilibrium and excited state intramolecular proton transfer (ESIPT) behavior of Pz3HC system in four different polar solvents (polarity order: ACN > THF > TOL > CYC). Using quantum chemistry method, we first announce a coexistence mechanism between Pz3HC-1 and Pz3HC-3 in the ground state in four solvents based on the Boltzmann distribution. In particular, Pz3HC-1 is the principal configuration in non-polar solvent, but Pz3HC-3 is the principal configuration in polar solvent. In addition, the simulated fluorescence spectra interprets the negative solvatochromism effect of Pz3HC-1 and Pz3HC-3 in four solvents. The evidence from intramolecular hydrogen bonding (IHB) parameters and electronic perspective collectively confirms the light-induced IHB enhancement and intramolecular charge transfer (ICT) properties in Pz3HC-1 and Pz3HC-3, which raises the likelihood of the ESIPT process. Combining the calculation of potential energy curve (PEC) and intrinsic reaction coordinate (IRC), we demonstrate that the ESIPT ease of Pz3HC-1 in different polar solvents obeys the order of CYC > TOL > THF > ACN, while the order of ESIPT ease in Pz3HC-3 is opposite. Notably, the ESIPT process of Pz3HC-3 in CYC solvent is accompanied by the twisted intramolecular charge transfer (TICT) process. In addition, we also reveal that the enol* and keto* fluorescence peaks of Pz3HC-3 in CYC solvent are quenched by ISC and TICT process, respectively. Our work not only provides a satisfactory explanation of the novel dynamics mechanism for Pz3HC system, but also brings light to the design and application of new sensing molecules in the future.

A single excitation dual emission semi-salamo type multi-functional probe for sensitive pH and Cu2+ detection

pH and Cu2+ ion concentration changes are linked to disorders like Alzheimer's and cancer. Rapid detection of pH and Cu2+ ions is critical for public health and environmental concerns. The semi-salamo-type probe (E)-2-hydroxy-1-naphthaldehyde O-(2-(aminooxy)ethyl) oxime (NSS) demonstrated substantial dual-functional performance, sensing pH change and Cu2+ ions. A single excitation and double emission characteristic on the probe NSS made it distinctive. Probe NSS exhibits pH-dependent excited state intramolecular proton transfer (ESIPT), and its optical properties vary based on the pH environment. Probe NSS detects pH changes from 2 to 11 by changing the “off-on-off” of the excited state intra-molecular proton transfer (ESIPT) mechanism, exhibiting rapid, reversible, and selective responses. In addition, the luminescent salamo-like naphthalene-based probe NSS can coordinate with Cu2+ ions, achieving great selectivity and sensitivity to identify Cu2+ ions with a detection limit of 0.84 ppb (13.2 nM) Probe NSS can detect Cu2+ ions in actual water samples such as tap water and yellow river water. The test strip loaded with probe NSS enabled quick and accurate detection of Cu2+ ions in water samples. Consequently, the versatile salamo-type probe NSS lays the foundation for developing high sensitivity and fast-response dual-mode pH meters as well as Cu2+ sensing.

2-Aryl-3H-1,3-Benzazaphosphole Oxides: Synthesis, Optical Properties, and Excited State Intramolecular Proton Transfer.

Inclusion of a heteroatom to the phosphole ring is a promising strategy to intrinsically modulate the optical properties of phosphole derivatives. We report on a series of 2-aryl-3H-1,3-benzazaphosphole oxides that were efficiently prepared via sequential C-P cross-coupling, dehydrative [3+2] cycloaddition, and ring-oxidation reactions. The inclusion of one nitrogen atom into the benzophosphole framework caused red shifting of the absorption and emission maxima, reflecting the greater stabilization of the LUMO level. 2-(2-Hydroxyphenyl)benzazaphosphole oxide underwent excited state intramolecular proton transfer and emitted a weak fluorescence from the excited state of the N-H tautomer.

Orbital-Optimized Versus Time-Dependent Density Functional Calculations of Intramolecular Charge Transfer Excited States.

The performance of time-independent, orbital-optimized calculations of excited states is assessed with respect to charge transfer excitations in organic molecules in comparison to the linear-response time-dependent density functional theory (TD-DFT) approach. A direct optimization method to converge on saddle points of the electronic energy surface is used to carry out calculations with the local density approximation (LDA) and the generalized gradient approximation (GGA) functionals PBE and BLYP for a set of 27 excitations in 15 molecules. The time-independent approach is fully variational and provides a relaxed excited state electron density from which the extent of charge transfer is quantified. The TD-DFT calculations are generally found to provide larger charge transfer distances compared to the orbital-optimized calculations, even when including orbital relaxation effects with the Z-vector method. While the error on the excitation energy relative to theoretical best estimates is found to increase with the extent of charge transfer up to ca. -2 eV for TD-DFT, no correlation is observed for the orbital-optimized approach. The orbital-optimized calculations with the LDA and the GGA functionals provide a mean absolute error of ∼0.7 eV, outperforming TD-DFT with both local and global hybrid functionals for excitations with a long-range charge transfer character. Orbital-optimized calculations with the global hybrid functional B3LYP and the range-separated hybrid functional CAM-B3LYP on a selection of states with short- and long-range charge transfer indicate that inclusion of exact exchange has a small effect on the charge transfer distance, while it significantly improves the excitation energy, with the best-performing functional CAM-B3LYP providing an absolute error typically around 0.15 eV.

Effect of different substituted groups on excited state intramolecular proton transfer of BOHMB

AbstractThe photophysical features of 3‐(benzo[d]oxazol‐2‐yl)‐2‐hydroxy‐5‐methoxy benzaldehyde (BOHMB) were investigated through experimental (J. Phys. Chem. A 2019, 123, 10,246–10,253) and theoretical (Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy 2022, 266, 120,406) methods. However, the effect of substituent groups on the excited state proton transfer process has not been studied. In this work, the excited state intramolecular proton transfer (ESIPT) dynamics and photophysical properties of BOHMB with different substituent groups were investigated by density‐functional theory (DFT) and time‐dependent DFT (TDDFT) methods at CAM‐B3LYP/6‐311G(d,p) level. The primary parameters related to hydrogen bonding and infrared vibration frequency were obtained to understand the ESIPT properties of BOHMB derivatives. The results indicate that the excited‐state intramolecular hydrogen bond (ESIHB) strengthening behaviors, and the intramolecular hydrogen bond O1–H2···O3 for 1a in the S1 state is the strongest among BOHMB derivatives. From the calculated potential energy curves, it can be inferred that the substitution and position of NH2 and NO2 groups will regulate the excited‐state energy barrier and thus affect the ESIPT process. The molecular absorption peak and fluorescence peak are affected by different substituting groups and different positions.