Excited-state Intramolecular Proton Transfer Process Research Articles

Effects of extended π-conjugated bridge on the ESIPT process and electronic spectra of 1,8-dihydroxynaphthalene substitute

The effect of extended π-conjugated bridge on the excited state intramolecular proton transfer (ESIPT) process and photophysical property of (E)-1-(1-hydroxynaphthalen-2-yl)-3-(2,3,6,7-tetrahydro-1H,5H-pyrido[3,2,1ij]quinolin-9yl)prop-2-en-1-one (NHP) was investigated using the density functional theory (DFT) and time-dependent density functional theory (TD-DFT) methods. Theoretical analyses demonstrate that the intramolecular hydrogen bonds (IHBs) with the studied molecules are strengthened to varying extents in the excited state. Specifically, as the π-conjugated bridge is extended, the ESIPT process becomes increasingly challenging due to the elevated energy barrier. Meanwhile, the fluorescence peak prominently intensifies and red-shifts to 720 nm. The study is expected to provide new insights into ESIPT-type red-emitting materials.

Regulating the Photoisomerization of Covalent Organic Framework for Enhanced Photocatalytic Hydrogen Evolution†

Comprehensive SummaryCovalent organic framework (COF) is a desirable platform to tailor electronic properties for improving photocatalytic performances. However, the study on excited‐state configurations that determine photogenerated carrier dynamics has long been neglected. Herein, we concentrate on the molecular design of β‐ketoenamine‐linked COFs to drive their photoisomerization via the excited‐state intra‐molecular proton transfer (ESIPT), which can induce the partial keto‐to‐enol tautomerization and accordingly rearrange the photoinduced charge distribution. We demonstrate that the push‐pull electronic effect of functional side groups attached on the framework linkers is directly correlated with the ESIPT process. The phenylene linkers modified with electron‐withdrawing cyano‐groups reinforce the ESIPT‐induced tautomerization, leading to the in situ partial enolization for extended π‐conjugation and rearranged electron‐hole distribution. In contrast, the electron‐rich linkers limit the photoisomerization of COF and suppress the photoinduced electron accumulation. Thus, the maximum hydrogen evolution rate is achieved by the cyano‐modified COF, reaching as high as 162.72 mmol·g–1·h–1 with an apparent quantum efficiency of 13.44% at 475 nm, which is almost 11.5‐fold higher than those of analogous COFs with electron‐rich linkers. Our work opens up an avenue to control over the excited‐state structure transformation for enhanced photochemical applications.

Synthesis, spectroscopic characterization and biological activities of complexes of light lanthanide ions with 3-hydroxyflavone

New solid compounds of light lanthanide ions with 3-hydroxyflavone were synthesized in good yields (up to 85 %). The resulting complexes have been thoroughly characterized using various analytical and spectral techniques, including elemental analysis, complexometry, thermogravimetry, UV–VIS, FT-IR, 1H NMR, 109AgNPET LDI MS and fluorescence spectroscopy. The molecular formulas of the complexes were determined as follows: Ln(3HF)3, where 3HF-3-hydroxyflavone, Ln = La(III), Pr(III), Nd(III) and Ln(3HF)3·nH2O, where n = 1 for Ln = Ce(III), Sm(III), Eu(III), and n = 2 for Gd(III). Thermogravimetric studies revealed that the water molecules in the hydrated compounds are located in the outer coordination sphere. Based on the spectral data, it was noted that lanthanide ions interacted with the 3OH and 4CO groups of 3-hydroxyflavone. The effect of lanthanide ion chelation on the excited-state intramolecular proton transfer (ESIPT) process and fluorescence emission of 3HF was investigated. It was found that coordination with metal ions can suppress the ESIPT process and enhance the fluorescence emission of 3HF. The synthesized compounds were also screened for their antibacterial activity, free radical scavenging capacity, and interaction with BSA. The results showed that the complexes exhibit higher biological activity compared to the ligand.

Theoretical study on the atomic substitution effect on the aromaticity and ESIPT behavior of a novel chalcone-based fluorophore

Recently, a new ESIPT-based fluorophore (E)-2-(4-(dimethylamino) benzylidene)-7-hydroxy-1-indanone (7HIN) was designed and obtained experimentally. We investigated the excited state intramolecular proton transfer (ESIPT) behavior and photophysical properties of 7HIN based on density functional theory (DFT) and time-dependent DFT. Two derivatives of 7HIN (4HID and 4HBF) were obtained by replacing the CH2 group in the five-membered ring with NH group and O atom to study the atomic substitution effect on the proton transfer reactions and fluorescent features of 7HIN. All data from structural parameters, infrared frequencies and electron density showed that the intramolecular hydrogen bonds (IHB) in 7HIN and its derivatives were strengthened in the excited state (S1), which will accelerate the ESIPT process. The potential energy curves (PECs) indicated that the proton transfer can easily occur in the S1 state because of the lower energy barrier. The electron-hole analysis revealed that the S0 → S1 transition is an intramolecular charge transfer transition. The NH- and O-substitution led to a weakening of IHB, increased the ESIPT barrier and red-shifted the absorption/emission wavelength of 7HIN. The PBE38 functional in this work is very reliable since the experimental absorption/fluorescence wavelength of 7HIN was reproduced well.

Uncovering the sensing mechanism of a zinc ion sensor: Fluorescence enhancement induced by the elimination of the TICT state

Precise detection of zinc ion is of fundamental importance in the fields of environment protection and food safety. A comprehensive understanding of the sensing mechanism will help to the design of such sensors. The detailed photophysical process of a zinc ion sensor as well as the sensing mechanism are uncovered with the aid of density functional theory (DFT) and time-dependent density functional theory (TDDFT). Both the ground state and first excited state potential energy surfaces (PES) of the sensor are carefully explored to reveal the photo-physical process of the sensor. Excited state intramolecular proton transfer (ESIPT) is observed on the S1 state PES. Then, the twist motion of C=N double bond is triggered after the ESIPT process, which leads to a twisted intramolecular charge transfer (TICT) state. This TICT state is found to make the sensor non-emissive. With the addition of Zn2+, the TICT state is eliminated which greatly enhances the fluorescence of the sensor and achieves zinc ion detection. The interaction of the sensor with Cd2+ and Hg2+ are also explored, which well explains the good selectivity of the sensor.

Revealing the ESIPT process in benzoxazole fluorophores within polymeric matrices through theory and experiment.

The impact of the polymeric matrix on the photophysical characteristics of monomeric dyes responsive to excited-state intramolecular proton transfer (ESIPT) was investigated through UV-Vis absorption as well as steady-state and time-resolved emission spectroscopies. For this purpose, two benzoxazole monomers (M1 and M2) with acryloyl groups at different positions in their molecular structures were employed to facilitate covalent bonding within a styrene chain. Our findings reveal significant variations in their excited-state properties due to the proximity of the acryloyl groups, which affects the energy barrier of the ESIPT reaction, the emission wavelength, and the balance between the normal and tautomeric forms. The experimental results were corroborated through theoretical investigations at the DFT/TDDFT level, specifically using the B3LYP-D3/def2-TZVP methodology. Three notable observations emerged: donor/acceptor groups at the meta/para positions induced electron distribution changes, causing red-shifted emission for M2; in the polymer film, particularly in PM1, intramolecular hydrogen bond deactivation favored N* emission over T* emission; and the zwitterionic character of the T* species. This study underscores the advantages of functionalization in polymers, which can lead to colorless films and prevalent N* or T* emission, and contributes valuable insights into molecular design strategies for tailoring the photophysical properties of polymeric materials.

Effect of different substituent on the ESIPT process and fluorescence features of 2-(2-hydroxyphenyl)benzoxazole derivatives: A DFT/TD-DFT study

In this contribution, four derivatives of 5′-(para-R-Phenylene) vinyl-2-(2′-hydroxyphenyl) benzoxazole (PVHBO) were ingeniously designed by introducing two electron-withdrawing substituents and two electron-donating substituents, aiming to investigate the influence of different substituents on the photophysical properties of PVHBO and the excited state intramolecular proton transfer (ESIPT) process via the density functional theory (DFT) and time-dependent DFT (TD-DFT) methods. By utilizing the geometric parameters and the simulated infrared (IR) spectra, we compared the intramolecular hydrogen bonds (IHBs) strengths in the S0 and S1 states of the molecules. Via conducting the hole-electron analysis, the reduction in fluorescence intensity for the enol and keto forms of PVHBO, PVHBO-MeO, and PVHBO-NH2 were also well explicated. Besides, the potential energy curves (PECs) and corresponding transition state (TS) structures for both S0 and S1 states were also constructed to accurately obtain energy barriers of forward and reversed proton transfer processes. The calculated absorption and fluorescence spectra also show that PVHBO-NH2 has the largest Stokes shifts of 158 nm and 219 nm in both the enol and keto states, with a significant increase in fluorescence intensity observed upon the induction of electron-withdrawing groups. Through this work, it can provide the theoretical basis for the design of novel luminescent materials.

Low Amplified Spontaneous Emission Threshold from Solution Processable Excited‐State Intramolecular Proton Transfer Chromophores

AbstractChromophores undergoing excited‐state intramolecular proton transfer (ESIPT) feature a distinct four‐level photocycle and significant Stokes shift, which make them ideal for achieving population inversion upon photoexcitation, a fundamental prerequisite for lasing, by mitigating the concerns of self‐absorption owing to spectral overlap. This study focuses on functionalizing the hydroxyphenyl‐benzothiazole (HBT) ESIPT laser dye through the introduction of fluorene and phenyl‐carbazole moieties at the para‐position to the hydroxyl group, to demonstrate amplified spontaneous emission (ASE) activities. The synthesized HBT derivatives not only exhibit high thermal and photostability, but also high photoluminescence quantum yields, exceeding 40%, which is noteworthy for ESIPT materials emitting in the yellow–orange to red color ranges. Computational analyses show that these new HBT materials possess substantially lower ESIPT energy barriers, compared to their parent HBT, facilitating their efficient ESIPT processes. Moreover, these derivatives demonstrate a high radiative rate of 1.47 × 108 s−1. Thin films of a fluorene‐substituted HBT (HBT‐pFl) show a low solid‐state amplified spontaneous emission threshold value of 3.8 µJ cm−2 at 582 nm, representing the lowest reported solid‐state ASE threshold for laser dyes in the orange emission region (575–600 nm) to date.

Solvent effects on the ESIPT emission of salicylaldehyde Schiff base derivative: A theoretical reconsideration

Salicylaldehyde Schiff base derivatives have potential applications in bioimaging, chemical sensors and organic luminescence materials because of their high fluorescence quantum yield with the excited-state intramolecular proton transfer (ESIPT) process. Recently, Shu et al. studied the luminescent mechanism of the Et2N-substituted salicylaldehyde Schiff base compound (DDHAC) in solvents [Dyes and Pigments 195 (2021) 109708]. It showed double-peaked bands in an n-hexane solvent but a single-peaked band in an acetonitrile solvent. They suggested that the open-enol in the acetonitrile solvent was the dominant species. They considered that open-enol fluorescence and ESIPT fluorescence constituted a dual fluorescent phenomenon in the n-hexane solvent. However, because acetonitrile is a non-protonic solvent, DDHAC molecules in acetonitrile mainly existed as the lower-energy hydrogen-bonded enol form rather than the open-enol form alone. In addition, the open-enol did not undergo the ESIPT process in n-hexane. Therefore, the luminescence mechanism of the DDHAC molecules in n-hexane and acetonitrile solvents needs to be reconsidered. In this study, we investigated the DDHAC molecules in n-hexane and acetonitrile solvents using the density functional theory and time-dependent density functional theory. The potential energy surfaces and optimisation of structures elucidated that the DDHAC molecules in n-hexane and acetonitrile solvents underwent the ESIPT process. The calculated fluorescence peaks demonstrated that the single-peaked broad emission band in the acetonitrile solvent was formed by the combination of the hydrogen-bonded enol* and keto* forms rather than open-enol*. Moreover, the dual fluorescence peaks in the n-hexane solvent were reattributed to the open-enol* form and hydrogen-bonded enol* form. The lack of keto* fluorescence in the n-hexane solvent was attributed to diminished charge coupling in comparison to the enol* form. Our results revise the mechanism of the DDHAC molecules in n-hexane and acetonitrile solvents, providing guidance for designing efficient organic fluorescence probes.

Multi-dimensional hydrogen bonds regulated emissions of single-molecule system enabling surficial hydrophobicity/hydrophilicity mapping

Constructing multi-dimensional hydrogen bond (H-bond) regulated single-molecule systems with multi-emission remains a challenge. Herein, we report the design of a new excited-state intramolecular proton transfer (ESIPT) featured chromophore (HBT-DPI) that shows flexible emission tunability via the multi-dimensional regulation of intra- and intermolecular H-bonds. The feature of switchable intramolecular H-bonds is induced via incorporating several hydrogen bond acceptors and donors into one single HBT-DPI molecule, allowing the “turn on/off” of ESIPT process by forming isomers with distinct intramolecular H-bonds configurations. In response to different external H-bonding environments, the obtained four types of crystal/cocrystals vary in the contents of isomers and the molecular packing modes, which are mainly guided by the intermolecular H-bonds, exhibiting non-emissive features or emissions ranging from green to orange. Utilizing the feature of intermolecular H-bond guided molecular packing, we demonstrate the utility of this fluorescent material for visualizing hydrophobic/hydrophilic areas on large-scale heterogeneous surfaces of modified poly(1,1-difluoroethylene) (PVDF) membranes and quantitatively estimating the surface hydrophobicity, providing a new approach for hydrophobicity/hydrophilicity monitoring and measurement. Overall, this study represents a new design strategy for constructing multi-dimensional hydrogen bond regulated ESIPT-based fluorescent materials that enable multiple emissions and unique applications.

AIE-ESIPT Photoluminescent Probe Based on 3-(3-Hydroxypyridin-2-yl)isoquinolin-4-ol for the Detection of Intracellular Hydrogen Peroxide.

Excited-state intramolecular proton transfer (ESIPT) molecules, which feature large Stokes shifts to avoid self-absorption, play an essential role in photoluminescent bioimaging probes. Herein, we report the development of an ESIPT molecule 3-(3-hydroxypyridin-2-yl)isoquinolin-4-ol (PiQ). PiQ not only undergoes a distinct ESIPT process unlike the symmetrical 2,2'-bipyridyl-3,3'-diol but also exhibits aggregation-induced emission (AIE) characteristics. PiQ self-assembles into aggregates with an average size of 241.0±51.9 nm in aqueous solutions, leading to significantly enhanced photoluminescence. On the basis of the ESIPT and AIE characteristics of PiQ, the latter is functionalized with a hydrogen peroxide-responsive 4-pinacoratoborylbenzyl group (B) and a carboxylesterase-responsive acetyl group (A) to produce a photoluminescent probe B-PiQ-A. The potential of PiQ for applications in bioimaging and chemical sensing is underscored by its efficient detection of both endogenous and exogenous hydrogen peroxide in living cells.

Theoretical Insights into the Effect of Different Numbers of Thiophene Groups on Hydrogen Bond Interaction and Excited-State Intramolecular Proton-Transfer Process for Flavonoid Derivatives.

In this study, we systematically explored the impact of varying the number of thiophene groups on the hydrogen bond interaction and excited-state intramolecular proton-transfer (ESIPT) processes in flavonoid derivatives (STF, DTF, and TTF) using the density functional theory and time-dependent density functional theory methods. Initially, a thorough analysis of the optimized geometric structures revealed that the intramolecular hydrogen bond in the S1 state is enhanced and gradually weakened as the number of thiophene groups increases. To gain a deeper understanding of the hydrogen bond interaction, topological analysis, interaction region indicator scatter plots, and isosurface plots were employed. These images provide further insights that align with the structural analysis. Additionally, we observed a red-shift in the electronic spectra (absorption and fluorescence spectra), which is primarily attributed to the narrowing of the energy gap between the highest occupied molecular orbital and the lowest unoccupied molecular orbital, as elucidated by the frontier molecular orbitals. Furthermore, a combined analysis between the hole-electron distribution and the transition density matrix heat map shows that electron excitation involves the unidirectional charge-transfer mechanism. In the end, by conducting relaxed potential energy curve scans, we found that an increase in the number of thiophene groups elevates the energy barrier for ESIPT, making it more challenging for the reaction. In summary, our study underscores the vital effect of thiophene-substituted numbers in modulating the ESIPT process, which is able to provide valuable insights for the design and synthesis of desired organic fluorescent probes in the future.

Concerning for the solvent-polarity-dependent conformational equilibrium and ESIPT mechanism in Pz3HC system: A novel insight

In this report, we propose a new insight into the interaction between the solvent-polarity-dependent conformational equilibrium and excited state intramolecular proton transfer (ESIPT) behavior of Pz3HC system in four different polar solvents (polarity order: ACN > THF > TOL > CYC). Using quantum chemistry method, we first announce a coexistence mechanism between Pz3HC-1 and Pz3HC-3 in the ground state in four solvents based on the Boltzmann distribution. In particular, Pz3HC-1 is the principal configuration in non-polar solvent, but Pz3HC-3 is the principal configuration in polar solvent. In addition, the simulated fluorescence spectra interprets the negative solvatochromism effect of Pz3HC-1 and Pz3HC-3 in four solvents. The evidence from intramolecular hydrogen bonding (IHB) parameters and electronic perspective collectively confirms the light-induced IHB enhancement and intramolecular charge transfer (ICT) properties in Pz3HC-1 and Pz3HC-3, which raises the likelihood of the ESIPT process. Combining the calculation of potential energy curve (PEC) and intrinsic reaction coordinate (IRC), we demonstrate that the ESIPT ease of Pz3HC-1 in different polar solvents obeys the order of CYC > TOL > THF > ACN, while the order of ESIPT ease in Pz3HC-3 is opposite. Notably, the ESIPT process of Pz3HC-3 in CYC solvent is accompanied by the twisted intramolecular charge transfer (TICT) process. In addition, we also reveal that the enol* and keto* fluorescence peaks of Pz3HC-3 in CYC solvent are quenched by ISC and TICT process, respectively. Our work not only provides a satisfactory explanation of the novel dynamics mechanism for Pz3HC system, but also brings light to the design and application of new sensing molecules in the future.

Mechanistic Insights into the Excited-State Intramolecular Proton Transfer (ESIPT) Process of 2-(2-Aminophenyl)naphthalene.

The 2-(2-aminophenyl)naphthalene molecule attracted much attention due to excited-state intramolecular proton transfer (ESIPT) from an amino NH2 group to a carbon atom of an adjacent aromatic ring. The ESIPT mechanisms of 2-(2-aminophenyl)naphthalene are still unclear. Herein, the decay pathways of this molecule in vacuum were investigated by combining static electronic structure calculations and nonadiabatic dynamics simulations. The calculations indicated the existence of two stable structures (S0-1 and S0-2) in the S0 and S1 states. For the S0-1 isomer, upon excitation to the Franck-Condon point, the system relaxed to the S1 minimum quickly, and then there exist four decay pathways (two ESIPT ones and two decay channels with C atom pyramidalization). In the ESIPT decay pathways, the system encounters the S1S0-PT-1 or S1S0-PT-2 conical intersection, which funnels the system rapidly to the S0 state. In the other two pathways, the system de-excited from the S1 to the S0 state via the S1S0-1 or S1S0-2 conical intersection. For the S0-2 structure, the decay pathways were similar to those of S0-1. The dynamics simulations showed that 75 and 69% of trajectories experienced the two ESIPT conical intersections for the S0-1 and S0-2 structures, respectively. Our simulations showed that the lifetime of the S1 state of S0-1 (S0-2) is estimated to be 358 (400) fs. Notably, we not only found the detailed reaction mechanism of the system but also found that the different ground-state configurations of this system have little effect on the reaction mechanism in vacuum.

The effect of the number of conjugated C=C bonds on the ESIPT and ICT reactions of SNCN derivatives

The electronic structure of the molecule is significantly influenced by the number of conjugated C=C bonds. In this work, the influence of the conjugated C=C bonds of the SNCN derivatives on the excited state intramolecular proton transfer (ESIPT) and intramolecular charge transfer (ICT) properties are studied by density functional theory (DFT) and time-dependent density functional theory (TDDFT). The calculation level is proved to be reasonable by calculating electronic spectra. The hydrogen bond parameters, infrared vibrational frequency (IR), reduction density gradient (RDG) isosurface, topological analysis and potential energy curves of SNCN derivatives in ground state (S0) and the first excited state (S1) are analyzed. According to theoretical research results, ESIPT reaction has a higher likelihood of occurring in the S1 state. Moreover, the ESIPT reaction becomes more challenging to occur with the number of conjugated C=C bonds rising. Finally, the analyses of the frontier molecular orbitals (FMOs), dipole moment and charge transfer transition confirm that the ICT effect is aided by the increased number of conjugated C=C bonds. This work indicates that the number of conjugated C=C bonds can regulate the ESIPT and ICT processes, which provides guidance for the study of fluorescent groups with similar characteristics.

Exploring electron donor and acceptor effects: DFT analysis of ESIPT/GSIPT in 2-(oxazolinyl)-phenols for photophysical and luminophore enhancement.

Understanding excited-state intramolecular proton transfer (ESIPT) is essential for designing organic molecules to enhance photophysical and luminophore properties in the development of optoelectronic devices. In this context, an attempt has been made to understand the impact of substituents on the ESIPT process of 2-(oxazolinyl)-phenol. Electron donating (EDG: -NH2, -OCH3, and -CH3) and electron withdrawing (EWG: -Cl, -Br, -COOH, -CF3, -CN, and -NO2) substitutions have been computationally designed and screened through density functional theory (DFT) and time-dependent density-functional theory (TDDFT) calculations. Furthermore, the ground state intramolecular proton transfer and ESIPT mechanisms of these designed luminophores are explored using the transition state theory. The results reveal that molecules with EDG show higher absorption and emission peaks than molecules with EWG and also indicate that the mobility of charge carriers in 2-(oxazolinyl)-phenol derivatives is significantly influenced by substituents. We found that the EWGs decrease the reorganization energy and increase the vertical ionization potential and electron affinity values, as well as the highest occupied molecular orbital-lowest unoccupied molecular orbital gap, compared to the EDG substituted molecules. Significantly, the excited state (S1) of the keto emission (K) form shows notably larger values for the EDG substitutions. The intersystem crossing pathway efficiency weakens with reduced spin-orbit coupling matrix element in the enol form with electron-donating substituents and vice versa in the keto form during S1-T3 transitions. Our research links intramolecular proton transfers and triplet generation, making these substituted molecules appealing for optoelectronic devices. Introducing EDGs, such as -NH2, boosts the ESIPT reaction in 2-(oxazolinyl)-phenol. This study guides designing ESIPT emitters with unique photophysical properties.

Effect of different substituted groups on excited state intramolecular proton transfer of BOHMB

AbstractThe photophysical features of 3‐(benzo[d]oxazol‐2‐yl)‐2‐hydroxy‐5‐methoxy benzaldehyde (BOHMB) were investigated through experimental (J. Phys. Chem. A 2019, 123, 10,246–10,253) and theoretical (Spectrochimica Acta Part A: Molecular and Biomolecular Spectroscopy 2022, 266, 120,406) methods. However, the effect of substituent groups on the excited state proton transfer process has not been studied. In this work, the excited state intramolecular proton transfer (ESIPT) dynamics and photophysical properties of BOHMB with different substituent groups were investigated by density‐functional theory (DFT) and time‐dependent DFT (TDDFT) methods at CAM‐B3LYP/6‐311G(d,p) level. The primary parameters related to hydrogen bonding and infrared vibration frequency were obtained to understand the ESIPT properties of BOHMB derivatives. The results indicate that the excited‐state intramolecular hydrogen bond (ESIHB) strengthening behaviors, and the intramolecular hydrogen bond O1–H2···O3 for 1a in the S1 state is the strongest among BOHMB derivatives. From the calculated potential energy curves, it can be inferred that the substitution and position of NH2 and NO2 groups will regulate the excited‐state energy barrier and thus affect the ESIPT process. The molecular absorption peak and fluorescence peak are affected by different substituting groups and different positions.

Effects of oxygen family elements on electron-withdrawing nitryl-substituted 2-(2’-hydroxyphenyl)benzazole derivatives: a theoretical investigation

The excited state intramolecular proton transfer (ESIPT) reaction is a well-studied photo reaction, based on this mechanism, many high-performance organic chromophores can be selected. It is widely acknowledged that the 2-(2’-hydroxyphenyl)benzazole (HBX) derivatives undergo the ESIPT process. This work mainly uses DFT and TDDFT methods to clarify the effects of oxygen family substituted elements on excited states for HBX derivatives. First, we probe into the molecular structures of HBX derivatives (HBX-O, HBX-S and HBX-Se) and explore their infrared (IR) vibrational behaviours. The results confirm that light excitation in S1 state enhances the hydrogen bonds of HBX dyes. Additionally, analysis of the frontier molecular orbitals shows that charge redistribution promotes the ESIPT process. This article provides a detailed explanation of the excited state reaction behaviours of three HBX dyes and demonstrates that substitution effects regulate the ESIPT processes of these dyes. This finding will contribute to the development of new photo-reactive substances in the future.

Investigating the Photophysical Aspects of a Naphthalene-Based Excited-State Proton Transfer Dye 1-(1H-Benzo[d]imidazol-2-yl)naphthalen-2-ol: pH-Dependent Modulation of Photodynamics.

The steady state and time-resolved photophysical behavior of a proton transfer dye 1-(1H-benzo[d]imidazol-2-yl)naphthalen-2-ol (H-BINO) was investigated. The excited state intramolecular proton transfer (ESIPT) reaction in H-BINO is predominant in nonpolar solutions (toluene and DCM) with a lifetime of ∼1.0 ns. However, in polar media (DMF and MeOH), the excited state photodynamics is characterized by a complex equilibrium of emission from the locally excited state (0.1-2.3 ns), the phototautomer (0.5-1.2 ns), and the anionic emission (2.1-5.4 ns). In the solid state, emission from the various aggregated states dictates the photobehavior. Interestingly, the photodynamics in aqueous solution changes starkly as a function of pH with the anionic (2.1 ns) and phototautomeric (0.5-1.0 ns) emissions guiding the photodynamics as the pH of the medium increases. Optimized structural parameters at the proton donor and acceptor sites for the enol and keto forms and the calculated potential energy curve along the proton transfer coordinate at the density functional theory (DFT) level with the B3LYP/6-311G++(d,p) theory support a favorable and barrierless ESIPT process. The current results will surely boost the ongoing research on small molecule emissive materials.

Theoretical study on the effects of substituents and solvent polarity on the ESIPT properties and electronic spectra of 2-((E)-(naphthalene-3-ylimino)-methyl) phenol derivatives

In this work, the excited state intramolecular proton transfer (ESIPT) properties of the 2-((E)-(naphthalene-3-ylimino)-methyl) phenol (NMP) derivatives (NMP-NH2, NMP-OMe) in different solvents are investigated by the density functional theory (DFT) and time-dependent density functional theory (TD-DFT) methods. The results indicate NMP-OMe is more inclined to undergo the ESIPT process among the two derivatives, and the greater the polarity of solvent, the more likely the ESIPT process is to take place. Meaningfully, the two derivatives can generate the fluorescence spectra from the blue region (548 nm) to orange region (628 nm).