Excitation Spectra Research Articles

Diagnostics of luminescent recording media based on the polarized scattering spectra of hologram sensors formed in the substance analyzed

The article is devoted to the diagnosis and identification of luminescent holographic information carriers in particular wine products using polarization holographic spectroscopy methods. For the first time, to our best knowledge, a technique has been developed for measuring and analyzing scattered polarized light (depolarization spectra) on polarization-holographic sensors formed in analyte. Polarized scattering spectra on a hologram sensor (measuring transducers) are of particular interest, since they provide information not only about the chemical composition of the media, for example, luminescence and absorption spectra, but also about particles that may be present in the analyte – the higher the anisotropy of the molecules and atoms, the greater the depolarization. Methods for measuring polarized scattering and excitation spectra carried out for various samples of holographic materials, as well as methods for processing and presenting the obtained spectral data are described. This may be of interest, since recording media, in particular wine, are complex colloidal systems. For the diagnosis, classification and identification of recording materials, it is proposed for the first time to use reflective holographic sensors (Yu.N. Denisyuk) of various physical natures (the concept of a spectral holographic portrait).

Effect of gamma-irradiation on the photoluminescence of silver-doped lithium triborate glass.

Optical-luminescence properties, including absorption spectra, photoluminescence excitation spectra, and changes in photoluminescence spectra after irradiation with γ-rays in the dose range of 1-3Gy, were measured for novel L i B 3 O 5:A g dosimeter glass. A clear dependence of the intensity of the photoluminescence (PL), with a maximum of approximately 300nm, on the dose value when excited by light with λ e x c =220n m was observed. The mechanism of PL in γ-irradiated L i B 3 O 5:A g glass is proposed to be a consequence of radiation annihilation with the emission of relaxed exciton-like electronic excitations with the participation of impurity defects (A g 0) in the glass structure. Considering that L i B 3 O 5 has an effective atomic number of Z e f f =7.39, which is the closest to Z e f f =7.42 of human body tissue, L i B 3 O 5:A g glass can be very promising for γ-dosimetry in medical practice during radiation therapy of patients with cancer. The presence of lithium Li(6) and boron B(10) isotopes increases the sensitivity of L i B 3 O 5:A g glass to neutrons, which is promising for the manufacture of individual neutron dosimeters for applications in a new field of radiation therapy-neutron therapy.

Advantageous occupation of Cu2+ in the B site of double-perovskite Rb2BB'Br6 (B = K; B′ = Bi) framework for white-light-emission

Research on lead-free double perovskite has demonstrated its potential as a solution to the stability and toxicity issues associated with lead-based inorganic perovskite white light-emitting diodes (WLED). This current investigation was designed to fabricate, examine, and compare the photoluminescence (PL) characteristics of Cu2+-activated Rb2BB'Br6 (B = K and B′ = Bi) double-perovskite (DP) [A2BB'Br6] luminous materials. Bi3+ ions are substituted with Cu2+ ions at their B′ sites. These ions are distributed to the equilibrium valence state and demonstrate minimal variation in ion radius. The microstructure and phase purity of Rb2BB'Br6:Cu2+ DP were assessed by scanning electron microscopy (SEM) and X-ray diffraction (XRD). The Rietveld refinement was also used to identify the crystal structures, and the resulting samples all exhibit cubic crystal structures. The Fm3m space group in Rb2BB'Br6 DP frameworks is significantly impacted by the B sites. The PL spectra were used to thoroughly examine the associated mechanism of the Cu2+ → Bi3+ energy-transfer process. Cu2+ ions can be successfully doped in the Rb2KBiBr6 host with an optical band gap (Eg) of 2.74 eV (RKBBr: 0.025Cu2+). The Rb2KBiBr6:Cu2+ phosphor exhibits distinct emission bands from 450 to 650 nm upon UV excitation at 366 nm. The Cu2+→ Bi3+ energy transfer design allows for systematic luminescence tuning from blue to white due to spectral overlap between the Cu2+ emission and Bi3+ excitation spectra. It has been established that Cu2+ → Bi3+ energy transfer significantly increases the white emission intensity of Bi3+, with an associated colour temperature of 7892 K and an outstanding colour rendering index of 88.8. As a down-conversion luminous material in solid-state illumination for the upcoming generation of display devices, the discovered Rb2KBiBr6: 0.025Cu2+ phosphor exhibits remarkable promise.

Experimental and numerical study on dynamic response of offshore wind turbine subjected to earthquake loads

In order to investigate the response of offshore wind turbines (OWTs) under earthquake, shaking table test is conducted using a 6.45 MW OWT as prototype. The effective length of the embedded steel pile is determined using the equivalent embedment method, and a scale model with a similarity constant of 1:15 is designed. The dynamic characteristics of the scale model are evaluated through position-shift and white noise. Three earthquakes with different spectrum characteristics are utilized as inputs, and subsequently, an analysis is performed to assess the earthquake response of the OWT. The results demonstrate that the dynamic characteristics between the scale model and the prototype model meet the similarity constants. Due to the eccentric mass, torsional vibrations are induced when subjected to bidirectional excitation, resulting in the occurrence of ‘beat vibration’ phenomenon. The acceleration is significantly influenced by the excitation spectrum, with the maximum occurring at either the top or 2/3 height, and Darfield with wide spectrum result in a more pronounced stimulation. The displacements are all observed at the pinnacle of the tower. The Imperial and Kocaeli, characterized by shorter duration and higher energy concentration, elicit more pronounced displacement. Stress concentration occurs at the lower 1/3 due to sudden stiffness change.

Organic Fluorophores with Large Stokes Shift for the Visualization of Rapid Protein and Nucleic Acid Assays.

Organic small-molecule fluorophores, characterized by flexible chemical structure and adjustable optical performance, have shown tremendous potential in biosensing. However, classical organic fluorophore motifs feature large overlap between excitation and emission spectra, leading to the requirement of advanced optical set up to filter desired signal, which limits their application in scenarios with simple settings. Here, a series of wavelength-tunable small-molecule fluorescent dyes (PTs) bearing simple organic moieties have been developed, which exhibit Stokes shift up to 262 nm, molar extinction coefficients ranged 30,000-100,000 M-1 cm-1, with quantum yields up to 54.8 %. Furthermore, these dyes were formulated into fluorescent nanoparticles (PT-NPs), and applied in lateral flow assay (LFA). Consequently, limit of detection for SARS-CoV-2 nucleocapsid protein reached 20 fM with naked eye, a 100-fold improvement in sensitivity compared to the pM detection level for colloidal gold-based LFA. Besides, combined with loop-mediated isothermal amplification (LAMP), the LFA system achieved the visualization of single copy level nucleic acid detection for monkeypox (Mpox).

Electrical conductivity, luminescence, and deep acceptor levels in β-Ga2O3-In2O3 polycrystalline solid solution doped with Zr4+ or Ca2+ ions

Photoluminescence, luminescence excitation spectra, and electrical conductivity of β-Ga2O3-In2O3 solid solutions were studied. For this purpose, polycrystalline samples of unintentionally doped (UID) and doped with Ca or Zr β-Ga2O3-In2O3 solid solution with 20% In were synthesized and characterized. All samples were obtained by the high-temperature solid-phase method from appropriate oxides at 1300 °C at low and high oxygen partial pressure. It was established that UID and doped with Ca2+ or Zr4+ samples synthesized in an oxygen atmosphere were highly resistive, while the samples synthesized in an argon atmosphere had high conductivity. The conductivity was the lowest in the samples doped with Ca2+ and was 10−13 Ω−1 cm−1, while in the samples doped with Zr4+, the electrical conductivity was the highest and reached 10−3 Ω−1 cm−1. The broadband luminescence of β-Ga2O3-In2O3 solid solution is a superposition of three elementary bands with maxima in the violet 3.08 eV, blue 2.73 eV, and green 2.45 eV regions of the spectrum. Doping with Ca2+ or Zr4+ impurities and varying the synthesis atmosphere led mainly to a redistribution of intensities between the elementary luminescence bands. The luminescence arises from the radiative recombination of charge carriers through donor–acceptor pairs and self-localized holes. Donors and acceptors are formed by native defects such as (Gai, VGa, VGaVo) or doping impurities (Zr4+, Ca2+). Unlike the luminescence spectra, the luminescence excitation spectra change significantly when the synthesis conditions vary or when doping with divalent impurities. The excitation band at 4.46 eV is due to electron transitions from the VGa or VGaVO acceptor levels to the conduction band. Electron transitions from acceptor levels of Ca2+ impurities are manifested in the intense excitation band at 4.1 eV.

Effects of temperature on the dynamic and static properties of a non-heisenberg anisotropic ferromagnet

In the mean-field approximation, the influence of both temperature and the value of the single-ion anisotropy constant of the “easy axis” type on the phase states and excitation spectra of a non-Heisenberg ferromagnet with S = 1 is studied. The temperature dependences of the vector and tensor order parameters in both the ferromagnetic and nematic phases have been determined. The dependence of excitation spectra on temperature and the value of the anisotropy constant is studied. It is shown that at a temperature different from zero, an additional (non-relaxation) branch of excitations arises in both the ferromagnetic and nematic phases. The temperature dependence of the phase diagram is studied.

Crystal Structure, Luminescence and Electrical Conductivity of Pure and Mg2+-Doped β-Ga2O3-In2O3 Solid Solutions Synthesized in Oxygen or Argon Atmospheres.

Undoped and Mg2+-doped β-Ga2O3-20% In2O3 solid solution microcrystalline samples were synthesized using the high-temperature solid-state chemical reaction method to investigate the influence of native defects on structural, luminescent, and electrical properties. The synthesis process involved varying the oxygen partial pressure by synthesizing samples in either an oxygen or argon atmosphere. X-ray diffraction (XRD) analysis confirmed the monoclinic structure of the samples with the lattice parameters and unit cell volume fitting well to the general trends of the (Ga1-xInx)2O3 solid solution series. Broad emission spectra ranging from 1.5 to 3.5 eV were registered for all samples. Luminescence spectra showed violet, blue, and green emission elementary bands. The luminescence intensity was found to vary depending on the synthesis atmosphere. An argon synthesis atmosphere leads to increasing violet luminescence and decreasing green luminescence. Intense bands at about 4.5 and 5.0 eV and a low-intensity band at 3.3 eV are presented in the excitation spectra. The electrical conductivity of the samples was also determined depending on the synthesis atmosphere. The high-resistance samples obtained in an oxygen atmosphere exhibited activation energy of around 0.98 eV. Samples synthesized in an argon atmosphere demonstrated several orders of magnitude higher conductivity with an activation energy of 0.15 eV. The results suggest that the synthesis atmosphere is crucial in determining the luminescent and electrical properties of undoped β-Ga2O3-In2O3 solid solution samples, offering the potential for various optoelectronic applications.

Manipulating topological charge of nested skyrmion bags by microwave magnetic fields

Nested skyrmion bags, as magnetic solitons with arbitrary integer topological charges (Q), hold potential for applications in data encoding. A crucial issue is the local manipulation of skyrmions within nested skyrmion bags to control the total Q. In this study, we explore different possible ground states and resonant excitation spectra of nested skyrmion bags through micromagnetic simulations. More importantly, we demonstrate that the manipulation of the Q of nested skyrmion bags can be achieved by using microwave magnetic fields, i.e., the inner, middle, and outer skyrmions within the nested skyrmion bags are selectively excited by using the diverse out-of-plane excitation modes. By calculating the energy of skyrmions, we further analyze the relationship between the annihilation of skyrmions at different positions and the out-of-plane microwave magnetic fields. Our findings present a promising approach for manipulating the Q of nested skyrmion bags, potentially advancing their application in storage and logic devices.

Luminescence of some lanthanides in synthetic yttrium gagarinite (NaCaYF6)

NaCaYF6 is the formula for gagarinite. Noting the lack of luminescence studies in this material, we synthesized it using the hydrothermal method and investigated the luminescence of several lanthanides. Characteristic luminescence of Eu[Formula: see text], Dy[Formula: see text], Sm[Formula: see text] and Tb[Formula: see text] was observed. Detailed results on photoluminescence emission and excitation spectra, lifetime, chromaticity coordinates and concentration dependence of emission intensity are presented. Except for Tb[Formula: see text], which exhibits f-d excitation, the luminescence of other activators got quenched at 1[Formula: see text]mol % concentration. Eu[Formula: see text] emission in this host was peculiar, in that the emissions from higher 5D states were observed. Luminescence characteristics are explained using the known energy level diagrams for the lanthanide activators.

Effect of annealing temperature and doping concentrations on structure and optical properties of Eu3+-doped TiO2 nanomaterials

In this study, we successfully synthesized europium-doped TiO2 (TiO2:Eu3+) nanomaterials (NMs) with crystalline sizes ranging from 6.5 to 71.7 nm through a sol-gel method. Analysis of X-ray diffraction (XRD) patterns and ultraviolet-visible (UV-Vis) spectra indicates that the substitution of smaller-sized Ti4+ ions (0.745 Å) by larger-sized Eu3+ ions (0.947 Å) was more efficient at higher doping concentrations and annealing temperatures. Photoluminescence (PL) and photoluminescence excitation (PLE) spectra of the synthesized TiO2:7%Eu3+NMs exhibit a strong red emission band peaking at 613 nm and remarkable absorption in the blue light region centered at 463 nm, making them suitable for use in white light-emitting diode (WLED) applications. Our findings reveal that both annealing temperature and doping concentration significantly influence the structure and properties of these materials. Besides, the research team has seen, under the experimental conditions, the TiO2:7%Eu3+ sample annealed at 800°C exhibits the highest PL intensity. These results underscore the potential of the synthesized TiO2:Eu3+ NMs as red-emitting materials for WLED applications.

In-depth investigation of the effect of pH on the autofluorescence properties of DPF3b and DPF3a amyloid fibrils

Double PHD fingers 3 (DPF3) protein exists as two splicing variants, DPF3b and DPF3a, the involvement of which in human cancer and neurodegeneration is beginning to be increasingly recognised. Both isoforms have recently been identified as intrinsically disordered proteins able to undergo amyloid fibrillation. Upon their aggregation, DPF3 proteins exhibit an intrinsic fluorescence in the visible range, referred to as deep-blue autofluorescence (dbAF). Comprehension of such phenomenon remaining elusive, we investigated in the present study the influence of pH on the optical properties of DPF3b and DPF3a fibrils. By varying the excitation wavelength and the pH condition, the two isoforms were revealed to display several autofluorescence modes that were defined as violet, deep-blue, and blue-green according to their emission range. Complementarily, analysis of excitation spectra and red edge shift plots allowed to better decipher their photoselection mechanism and to highlight isoform-specific excitation-emission features. Furthermore, the observed violation to Kasha-Vavilov’s rule was attributed to red edge excitation shift effects, which were impacted by pH-mediated H-bond disruption, leading to changes in intramolecular charge and proton transfer, or π-electrons delocalisation. Finally, emergence of different autofluorescence emitters was likely related to structurally distinct fibrillar assemblies between isoforms, as well as to discrepancies in the amino acid composition of their aggregation prone regions.

Henlea earthworm bioluminescence comprises violet-blue BRET from tryptophan 2-carboxylate to deazaflavin cofactor

We recently identified the deazaflavin cofactor as a light emitter in novel bioluminescence (BL) system from Siberian earthworms Henlea sp. (Petushkov et al., 2023, Org. Biomol. Chem. 21:415–427). In the present communication we compared in vitro BL spectra in the absence and in the presence of the cofactor and found a wavelength shift from 420 to 476 nm. This violet-blue BRET to deazaflavin cofactor (acceptor of photonless transfer) masks the actual oxyluciferin as an emitter (BRET donor) in the novel BL system. The best candidate for that masked chromophore is tryptophan 2-carboxylate (T2C) found previously as a building block in some natural products isolated from Henlea sp. (Dubinnyi et al., 2020, ChemSelect 5:13155–13159). We synthesized T2C and acetyl-T2C, verified their presence in earthworms by nanoflow-HRMS, explored spectral properties of excitation and emission spectra and found a chain of excitation/emission maxima with a perfect potential for BRET: 300 nm (excitation of T2C) - 420 nm (emission of T2C) - 420 nm (excitation of deazaflavin) - 476 nm (emission of deazaflavin, BL). An array of natural products with T2C chromophore are present in BL earthworms as candidates for novel oxyluciferin. We demonstrated for the Henlea BL that the energy of the excited state of the T2C chromophore is transferred by the Förster mechanism and then emitted by deazaflavin (BRET), similarly to known examples: aequorin-GFP in Aequorea victoria and antenna proteins in bacterial BL systems (lumazine from Photobacterium and yellow fluorescent protein from Vibrio fischeri strain Y1).

High-speed fluorescence excitation-scanning hyperspectral imaging microscopy using thin-film tunable filters.

Hyperspectral imaging (HSI) technologies have enabled a range of experimental techniques and studies in the fluorescence microscopy field. Unfortunately, a drawback of many HSI microscope platforms is increased acquisition time required to collect images across many spectral bands, as well as signal loss due to the need to filter or disperse emitted fluorescence into many discrete bands. We have previously demonstrated that an alternative approach of scanning the fluorescence excitation spectrum can greatly improve system efficiency by decreasing light losses associated with emission filtering. Our initial system was configured using an array of thin-film tunable filters (TFTFs, VersaChrome, Semrock) mounted in a tiltable filter wheel (VF-5, Sutter) that required ~150-200 ms to switch between wavelengths. Here, we present a new configuration for high-speed switching of TFTFs to allow rapid time-lapse HSI microscopy. A TFTF array was mounted in a custom holder that was attached to a piezoelectric rotation mount (ThorLabs), allowing high-speed rotation. Switching between adjacent filters was achieved using the internal optics of a DG-4 lightsource (Sutter Instrument), including a pair of off-axis parabolic mirrors and galvanometers. Output light was coupled to a liquid lightguide and into an inverted widefield fluorescence microscope (TI-2, Nikon Instruments). Initial tests indicate that the HSI system provides a 15-20 nm bandwidth tunable excitation band and ~10-20 ms wavelength switch time, allowing for high-speed HSI imaging of dynamic cellular events. This work was supported by NIH P01HL066299, R01HL169522, NIH TL1TR003106, and NSF MRI1725937.

Scintillation and photoluminescence performance of Ce3+-doped high gadolinium oxyfluoride glass for circular electron-positron collider (CEPC)

The large size (4 cm × 4 cm × 1 cm) Ce3+-doped high gadolinium oxyfluoride glass with density of 5.83 g/cm³ was prepared by the melt quench method at 1220 °C. The glass is colorless and transparent over the visible range. The prolonged decay time under 275 nm UV light demonstrates the energy transfer from Gd3+ ions to Ce3+ ions. The X-ray excited luminescence spectra (XEL) show the emission peak corresponds to the 5d→4f transitions of Ce3+ ion. The integral emission intensity of glass was compared with that of bismuth germanate oxide (BGO) crystals. The scintillation property of glass was studied under the γ-ray from 137Cs source and a clear energy peak was observed with light yield (LY) over 1100 ph/MeV. The scintillation decay time comprises fast and slow components. All results presented in this work indicate the appropriate potential to be high-energy rays detecting material for CEPC.

Influence of Yb3+ percentage on emission of Er3+ doped into GdVO4 matrix

In this study, we used the non-hydrolytic sol–gel methodology to synthesize gadolinium vanadate particles doped with different Er3+ and Yb3+ molar ratios. Er3+ and Yb3+ chlorides and vanadium alkoxide were used as precursors during the sol–gel synthesis. The resulting powders were treated at 800 °C and characterized by x-ray diffraction and photoluminescence. The x-ray diffractogram displayed peaks attributed to the gadolinium vanadate matrix. Photoluminescence helped to evaluate the Fluorescence Intensity Ratio (FIR), which is important for understanding the nanothermometer property. The FIR of the GdVO4:Er3+/Yb3+ samples containing different Er3+ and Yb3+ molar ratios increased as a function of the laser power, which indicated that the local temperature increased. The excitation spectra obtained at fixed wavelengths of 525 and 555 nm displayed bands at 322, 379, and 489 nm, ascribed to the charge transfer band and Er3+ levels. Upon excitation at 321 nm, the emission spectra in the visible region presented intense bands at 525 and 555 nm, due to Er3+ emission, and excitation at 321 nm led to emission in the infrared region, 980 and 1550 nm. In conclusion, the synthesized system can be employed as a temperature sensor.

Access to the Antenna System of Photosystem I via Single-Molecule Excitation-Emission Spectroscopy.

In the development of single-molecule spectroscopy, the simultaneous detection of the excitation and emission spectra has been limited. The fluorescence excitation spectrum based on background-free signals is compatible with the fluorescence-emission-based detection of single molecules and can provide insight into the variations in the input energy of the different terminal emitters. Here, we implement single-molecule excitation-emission spectroscopy (SMEES) for photosystem I (PSI) via a cryogenic optical microscope. To this end, we extended our line-focus-based excitation-spectral microscope system to the cryogenic temperature-compatible version. PSI is one of the two photosystems embedded in the thylakoid membrane in oxygen-free photosynthetic organisms. PSI plays an essential role in electron transfer in the photosynthesis reaction. PSIs of many organisms contain a few red-shifted chlorophylls (Chls) with much lower excitation energies than ordinary antenna Chls. The fluorescence emission spectrum originates primarily from the red-shifted Chls, whereas the excitation spectrum is sensitive to the antenna Chls that are upstream of red-shifted Chls. Using SMEES, we obtained the inclining two-dimensional excitation-emission matrix (2D-EEM) of PSI particles isolated from a cyanobacterium, Thermosynechococcus vestitus (equivalent to elongatus), at about 80 K. Interestingly, by decomposing the inclining 2D-EEMs within time course observation, we found prominent variations in the excitation spectra of the red-shifted Chl pools with different emission wavelengths, strongly indicating the variable excitation energy transfer (EET) pathway from the antenna to the terminal emitting pools. SMEES helps us to directly gain information about the antenna system, which is fundamental to depicting the EET within pigment-protein complexes.

Zero-thermal-quenching broadband yellow-emitting Bi3+-activated phosphors based on metal to metal charge transfer

Bi3+-activated phosphors have been proven to have potential applications foreground in white light-emitting diodes (WLED), plant growth lamps and temperature sensing. Therefore, it is urgent to exploit high-efficiency Bi3+-activated phosphors. Herein, a novel broadband yellow-emitting phosphor Ba2GdGaO5:Bi3+ with high internal quantum efficiency (IQE = 77%) was obtained based on metal to metal charge transfer (MMCT) between Bi3+ ground state and Gd3+ excited states. The photoluminescence excitation (PLE) spectrum and photoluminescence (PL) spectrum range from 225 nm to 400 nm and 400 nm to 700 nm, respectively, which can avoid the reabsorption phenomenon efficiently. Besides, Ba2GdGaO5:Bi3+ has superior thermal stability and it shows zero-thermal-quenching at 150 °C. The K+ doping hardly changes the thermal stability and can improve the PL intensity to 133.1% when the K+ concentration is 2%. Finally, a phosphor-convert WLED (pc-WLED) was simply synthesized by Ba2GdGaO5:Bi3+ and BaMgAl10O17:Eu2+ (BAM:Eu2+) phosphors. The doping of Eu3+ can significantly enhance the color rendering index (CRI, from 88.1 to 91.5) and reduce the correlated color temperature (CCT, from 4911 K to 4014 K). The above experimental results demonstrated that the phosphor has great application prospect in WLED.

Comparative study on fluorescence intensity ratio and chromatic coordinate temperature measurement using CsPbBr3-Eu3+ co-doped glass

We have fabricated CsPbBr3-Eu3+ co-doped glass for optical temperature measurement. Photoluminescence (PL) spectra, PL excitation (PLE) spectra and PL decay have been measured. The CsPbBr3 and Eu3+ show distinguishable PL spectra and different temperature dependences. Fluorescence intensity ratio (FIR) and chromatic coordinate temperature measurements are investigated. Absolute sensitivity (Sa), relative sensitivity (Sr) and temperature measurement accuracy (UT) are analyzed. For the FIR method, the Sa and Sr are better in comparison with other temperature sensing materials. The chromatic coordinate is calculated by using PL spectra. Comparing with FIR method, the chromatic coordinate method has smaller Sa and Sr, but better UT due to small uncertainty Ur(x). In addition, the chromatic coordinate method has linear temperature dependence, good compatibility and universality. Both FIR mode and chromatic coordinate mode have excellent temperature cycle characteristics..

Measurement of the Excitation Spectrum of a Dipolar Gas in the Macrodroplet Regime.

The excitation spectrum of a cigar-shaped strongly dipolar quantum gas at the crossover from a Bose-Einstein condensate to a trapped macrodroplet is predicted to exhibit peculiar features-a strong upward shift of low momentum excitation energies together with a strong multiband response for high momenta. By performing Bragg spectroscopy over a wide range of momenta, we observe both key elements and also confirm the predicted stiffening of excitation modes when approaching the macrodroplet regime. Our measurements are in good agreement with numerical calculations taking into account finite size effects.